| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit ba05b39d265bdd16913f7684600d9d41e2796745 ]
The buf passed in struct sdw_msg must only be written for a READ,
in that case the RDATA part of the response is the data value of the
register.
For a write command there is no RDATA, and buf should be assumed to
be const and unmodifable. The original caller should not expect its data
buffer to be corrupted by an sdw_nwrite().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916103505.1562210-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d2d05b88035d2d51a5bb6c5afec88a0880c73df4 ]
Inside set_at_max_writeback_rate() the calculation in following if()
check is wrong,
if (atomic_inc_return(&c->idle_counter) <
atomic_read(&c->attached_dev_nr) * 6)
Because each attached backing device has its own writeback thread
running and increasing c->idle_counter, the counter increates much
faster than expected. The correct calculation should be,
(counter / dev_nr) < dev_nr * 6
which equals to,
counter < dev_nr * dev_nr * 6
This patch fixes the above mistake with correct calculation, and helper
routine idle_counter_exceeded() is added to make code be more clear.
Reported-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Link: https://lore.kernel.org/r/20220919161647.81238-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c132ea6508b34956e5ed88d04936983ec230601 ]
Having greater than AHCI_MAX_PORTS (32) ports detected isn't that critical
from the further AHCI-platform initialization point of view since
exceeding the ports upper limit will cause allocating more resources than
will be used afterwards. But detecting too many child DT-nodes doesn't
seem right since it's very unlikely to have it on an ordinary platform. In
accordance with the AHCI specification there can't be more than 32 ports
implemented at least due to having the CAP.NP field of 5 bits wide and the
PI register of dword size. Thus if such situation is found the DTB must
have been corrupted and the data read from it shouldn't be reliable. Let's
consider that as an erroneous situation and halt further resources
allocation.
Note it's logically more correct to have the nports set only after the
initialization value is checked for being sane. So while at it let's make
sure nports is assigned with a correct value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c8ff91535880d41b49699b3829fb6151942de29e ]
In function device_init_td0_ring, memory is allocated for member
td_info of priv->apTD0Rings[i], with i increasing from 0. In case of
allocation failure, the memory is freed in reversed order, with i
decreasing to 0. However, the case i=0 is left out and thus memory is
leaked.
Modify the memory freeing loop to include the case i=0.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220909141338.19343-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d47e01b9d807808224347935562f7043a358054 ]
ADP5061_CHG_STATUS_1_CHG_STATUS is masked with 0x07, which means a length
of 8, but adp5061_chg_type array size is 4, may end up reading 4 elements
beyond the end of the adp5061_chg_type[] array.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b91a65230784a9ef644b8bdbb82a79ba4ae9456 ]
This patch is changing the simple workqueue in the gadget driver to be
allocated as async_wq with a higher priority. The pump worker, that is
filling the usb requests, will have a higher priority and will not be
scheduled away so often while the video stream is handled. This will
lead to fewer streaming underruns.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220907215818.2670097-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24b6c7798a0122012ca848ea0d25e973334266b0 ]
The DMA operations of HiSilicon PTT device can only work properly with
identical mappings. So add a quirk for the device to force the domain
as passthrough.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220816114414.4092-2-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1de7c3cf48fc41cd95adb12bd1ea9033a917798a ]
syzbot reported hung task [1]. The following program is a simplified
version of the reproducer:
int main(void)
{
int sv[2], fd;
if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
return 1;
if ((fd = open("/dev/nbd0", 0)) < 0)
return 1;
if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
return 1;
if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
return 1;
if (ioctl(fd, NBD_DO_IT) < 0)
return 1;
return 0;
}
When signal interrupt nbd_start_device_ioctl() waiting the condition
atomic_read(&config->recv_threads) == 0, the task can hung because it
waits the completion of the inflight IOs.
This patch fixes the issue by clearing queue, not just shutdown, when
signal interrupt nbd_start_device_ioctl().
Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239 [1]
Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]
The original code will "goto out_disable_device" and call
pci_disable_device() if pci_enable_device() fails. The kernel will generate
a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled
device".
We shouldn't disable a device that failed to be enabled. A simple return is
fine.
Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c94dcfa8fcff2dba53915f1dabfee49a3df8b88 ]
UDMA_CHAN_RT_*BCNT_REG stores the real-time channel bytecount statistics.
These registers are 32-bit hardware counters and the driver uses these
counters to monitor the operational progress status for a channel, when
transferring more than 4GB of data it was observed that these counters
overflow and completion calculation of a operation gets affected and the
transfer hangs indefinitely.
This commit adds changes to decrease the byte count for every complete
transaction so that these registers never overflow and the proper byte
count statistics is maintained for ongoing transaction by the RT counters.
Earlier uc->bcnt used to maintain a count of the completed bytes at driver
side, since the RT counters maintain the statistics of current transaction
now, the maintenance of uc->bcnt is not necessary.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220802054835.19482-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59b7e210a522b836a01516c71ee85d1d92c1f075 ]
An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to
lpfc_nlp_put() with a null pointer to a nodelist structure.
Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon
entry.
Link: https://lore.kernel.org/r/20220819011736.14141-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c69400b09e471a3f1167adead55a808f0da6534a ]
The xhci_plat_brcm xhci block can enter suspend with clock disabled to save
power and re-enable them on resume. Make use of the XHCI_SUSPEND_RESUME_CLKS
quirk to do so.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Link: https://lore.kernel.org/r/1660170455-15781-3-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8bd954c56197caf5e3a804d989094bc3fe6329aa ]
Introduce XHCI_SUSPEND_RESUME_CLKS quirk as a means to suspend and resume
clocks if the hardware is capable of doing so. We assume that clocks will
be needed if the device may wake.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Link: https://lore.kernel.org/r/1660170455-15781-2-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c02249fcbfc066bd33e2a7375c7006d4cb367f6 ]
An incoming Read request causes multiple Read responses. If a user MR to
copy data from is unavailable or responder cannot send a reply, then the
error messages can be printed for each response attempt, resulting in
message overflow.
Link: https://lore.kernel.org/r/20220829071218.1639065-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30eaf02149ecc3c5815e45d27187bf09e925071d ]
The function zynqmp_pll_round_rate is used to find a most appropriate
PLL frequency which the hardware can generate according to the desired
frequency. For example, if the desired frequency is 297MHz, considering
the limited range from PS_PLL_VCO_MIN (1.5GHz) to PS_PLL_VCO_MAX (3.0GHz)
of PLL, zynqmp_pll_round_rate should return 1.872GHz (297MHz * 5).
There are two problems with the current code of zynqmp_pll_round_rate:
1) When the rate is below PS_PLL_VCO_MIN, it can't find a correct rate
when the parameter "rate" is an integer multiple of *prate, in other words,
if "f" is zero, zynqmp_pll_round_rate won't return a valid frequency which
is from PS_PLL_VCO_MIN to PS_PLL_VCO_MAX. For example, *prate is 33MHz
and the rate is 660MHz, zynqmp_pll_round_rate will not boost up rate and
just return 660MHz, and this will cause clk_calc_new_rates failure since
zynqmp_pll_round_rate returns an invalid rate out of its boundaries.
2) Even if the rate is higher than PS_PLL_VCO_MIN, there is still a risk
that zynqmp_pll_round_rate returns an invalid rate because the function
DIV_ROUND_CLOSEST makes some loss in the fractional part. If the parent
clock *prate is 33333333Hz and we want to set the PLL rate to 1.5GHz,
this function will return 1499999985Hz by using the formula below:
value = *prate * DIV_ROUND_CLOSEST(rate, *prate)).
This value is also invalid since it's slightly smaller than PS_PLL_VCO_MIN.
because DIV_ROUND_CLOSEST makes some loss in the fractional part.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20220826142030.213805-1-quanyang.wang@windriver.com
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c65c3f3a2cbf21ed429d9b9c725bdb5dc6abf4cf ]
video_unregister_device will release device internally. There is no need to
call video_device_release after video_unregister_device.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b064d91440b33fba5b452f2d1b31f13ae911d71 ]
When the driver calls cx88_risc_buffer() to prepare the buffer, the
function call may fail, resulting in a empty buffer and null-ptr-deref
later in buffer_queue().
The following log can reveal it:
[ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
[ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500
[ 41.836311] Call Trace:
[ 41.836945] __enqueue_in_driver+0x141/0x360
[ 41.837262] vb2_start_streaming+0x62/0x4a0
[ 41.838216] vb2_core_streamon+0x1da/0x2c0
[ 41.838516] __vb2_init_fileio+0x981/0xbc0
[ 41.839141] __vb2_perform_fileio+0xbf9/0x1120
[ 41.840072] vb2_fop_read+0x20e/0x400
[ 41.840346] v4l2_read+0x215/0x290
[ 41.840603] vfs_read+0x162/0x4c0
Fix this by checking the return value of cx88_risc_buffer()
[hverkuil: fix coding style issues]
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd80fb2dbf1cd8751efbe4e53e54056f56a9b115 ]
"BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68"
Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is
longer than 15 bytes, string terminated NULL character will not be received
by Linux. Add explicit NULL character at last byte to fix issues when clock
name is longer.
This fixes below bug reported by KASAN:
==================================================================
BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68
Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3
Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT)
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xd4/0x108
print_address_description.isra.0+0xbc/0x37c
__kasan_report+0x144/0x198
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
strncpy+0x30/0x68
zynqmp_clock_probe+0x238/0x7b8
platform_drv_probe+0x6c/0xc8
really_probe+0x14c/0x418
driver_probe_device+0x74/0x130
__device_attach_driver+0xc4/0xe8
bus_for_each_drv+0xec/0x150
__device_attach+0x160/0x1d8
device_initial_probe+0x10/0x18
bus_probe_device+0xe0/0xf0
device_add+0x528/0x950
of_device_add+0x5c/0x80
of_platform_device_create_pdata+0x120/0x168
of_platform_bus_create+0x244/0x4e0
of_platform_populate+0x50/0xe8
zynqmp_firmware_probe+0x370/0x3a8
platform_drv_probe+0x6c/0xc8
really_probe+0x14c/0x418
driver_probe_device+0x74/0x130
device_driver_attach+0x94/0xa0
__driver_attach+0x70/0x108
bus_for_each_dev+0xe4/0x158
driver_attach+0x30/0x40
bus_add_driver+0x21c/0x2b8
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
zynqmp_firmware_driver_init+0x1c/0x24
do_one_initcall+0xa4/0x234
kernel_init_freeable+0x1b0/0x24c
kernel_init+0x10/0x110
ret_from_fork+0x10/0x18
The buggy address belongs to the page:
page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff
page dumped because: kasan: bad access detected
addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame:
zynqmp_clock_probe+0x0/0x7b8
this frame has 3 objects:
[32, 44) 'response'
[64, 80) 'ret_payload'
[96, 112) 'name'
Memory state around the buggy address:
ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2
>ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: Ian Nam <young.kwan.nam@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220510070154.29528-3-shubhrajyoti.datta@xilinx.com
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b292cafe2dd02d96a07147e4b160927e8399d5cc ]
This was fixed in initialize_cpsch before, but not in initialize_nocpsch.
Factor sdma bitmap initialization into a helper function to apply the
correct implementation in both cases without duplicating it.
v2: Added a range check
Reported-by: Ellis Michael <ellis@ellismichael.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e32df0c7ecead95d70ca89f39b1b2b02a59ff691 ]
[why]
vid stream control is double bufferred, if we don't wait for video
stream enable set to 0, we may get temporary image corruption
showing on the stream when setting PIXEL_TO_SYMBOL_FIFO_ENABLE to 0.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 97d8d6f075bd8f988589be02b91f6fa644d0b0b8 ]
[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.
[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.
Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b4d8db657192066bc6f1f6635d348413dac1e18 ]
The sequence for Source DP PHY CTS automation is [2][1]:
1- Emulate successful Link Training(LT)
2- Short HPD and change link rates and number of lanes by LT.
(This is same flow for Link Layer CTS)
3- Short HPD and change PHY test pattern and swing/pre-emphasis
levels (This step should not trigger LT)
The problem is with DP PHY compliance setup as follow:
[DPTX + on board LTTPR]------Main Link--->[Scope]
^ |
| |
| |
----------Aux Ch------>[Aux Emulator]
At step 3, before writing TRAINING_LANEx_SET/LINK_QUAL_PATTERN_SET
to declare the pattern/swing requested by scope, we write link
config in LINK_BW_SET/LANE_COUNT_SET on a port that has LTTPR.
As LTTPR snoops aux transaction, LINK_BW_SET/LANE_COUNT_SET writes
indicate a LT will start [Check DP 2.0 E11 -Sec 3.6.8.2 & 3.6.8.6.3],
and LTTPR will reset the link and stop sending DP signals to
DPTX/Scope causing the measurements to fail. Note that step 3 will
not trigger LT and DP link will never recovered by the
Aux Emulator/Scope.
The reset of link can be tested with a monitor connected to LTTPR
port simply by writing to LINK_BW_SET or LANE_COUNT_SET as follow
igt/tools/dpcd_reg write --offset=0x100 --value 0x14 --device=2
OR
printf '\x14' | sudo dd of=/dev/drm_dp_aux2 bs=1 count=1 conv=notrunc
seek=$((0x100))
This single aux write causes the screen to blank, sending short HPD to
DPTX, setting LINK_STATUS_UPDATE = 1 in DPCD 0x204, and triggering LT.
As stated in [1]:
"Before any TX electrical testing can be performed, the link between a
DPTX and DPRX (in this case, a piece of test equipment), including all
LTTPRs within the path, shall be trained as defined in this Standard."
In addition, changing Phy pattern/Swing/Pre-emphasis (Step 3) uses the
same link rate and lane count applied on step 2, so no need to redo LT.
The fix is to not rewrite link config in step 3, and just writes
TRAINING_LANEx_SET and LINK_QUAL_PATTERN_SET
[1]: DP 2.0 E11 - 3.6.11.1 LTTPR DPTX_PHY Electrical Compliance
[2]: Configuring UnigrafDPTC Controller - Automation Test Sequence
https://www.keysight.com/us/en/assets/9922-01244/help-files/
D9040DPPC-DisplayPort-Test-Software-Online-Help-latest.chm
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Or Cochvi <or.cochvi@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916054900.415804-1-khaled.almahallawy@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4de95950d970c71a9e82a24573bb7a44fd95baa1 ]
The Snapdragon 670 has the same quirk as Snapdragon 845 (needing to
restore the dll config). Add a compatible string check to detect the need
for this.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923014322.33620-3-mailingradian@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09847723c12fc2753749cec3939a02ee92dac468 ]
drm bridges added by meson_encoder_hdmi_init and meson_encoder_cvbs_init
were not manually removed at module unload time, which caused dangling
references to freed memory to remain linked in the global bridge_list.
When loading the driver modules back in, the same functions would again
call drm_bridge_add, and when traversing the global bridge_list, would
end up peeking into freed memory.
Once again KASAN revealed the problem:
[ +0.000095] =============================================================
[ +0.000008] BUG: KASAN: use-after-free in __list_add_valid+0x9c/0x120
[ +0.000018] Read of size 8 at addr ffff00003da291f0 by task modprobe/2483
[ +0.000018] CPU: 3 PID: 2483 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000011] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000006] dump_backtrace+0x1ec/0x280
[ +0.000012] show_stack+0x24/0x80
[ +0.000008] dump_stack_lvl+0x98/0xd4
[ +0.000011] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000008] kasan_report+0xb8/0xfc
[ +0.000008] __asan_report_load8_noabort+0x3c/0x50
[ +0.000009] __list_add_valid+0x9c/0x120
[ +0.000009] drm_bridge_add+0x6c/0x104 [drm]
[ +0.000165] dw_hdmi_probe+0x1900/0x2360 [dw_hdmi]
[ +0.000022] meson_dw_hdmi_bind+0x520/0x814 [meson_dw_hdmi]
[ +0.000014] component_bind+0x174/0x520
[ +0.000012] component_bind_all+0x1a8/0x38c
[ +0.000010] meson_drv_bind_master+0x5e8/0xb74 [meson_drm]
[ +0.000032] meson_drv_bind+0x20/0x2c [meson_drm]
[ +0.000027] try_to_bring_up_aggregate_device+0x19c/0x390
[ +0.000010] component_master_add_with_match+0x1c8/0x284
[ +0.000009] meson_drv_probe+0x274/0x280 [meson_drm]
[ +0.000026] platform_probe+0xd0/0x220
[ +0.000009] really_probe+0x3ac/0xa80
[ +0.000009] __driver_probe_device+0x1f8/0x400
[ +0.000009] driver_probe_device+0x68/0x1b0
[ +0.000009] __driver_attach+0x20c/0x480
[ +0.000008] bus_for_each_dev+0x114/0x1b0
[ +0.000009] driver_attach+0x48/0x64
[ +0.000008] bus_add_driver+0x390/0x564
[ +0.000009] driver_register+0x1a8/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000008] meson_drm_platform_driver_init+0x3c/0x1000 [meson_drm]
[ +0.000027] do_one_initcall+0xc4/0x2b0
[ +0.000011] do_init_module+0x154/0x570
[ +0.000011] load_module+0x1a78/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000009] __arm64_sys_init_module+0x78/0xb0
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000012] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000016] Allocated by task 879:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000011] __kasan_kmalloc+0x90/0xd0
[ +0.000007] __kmalloc+0x278/0x4a0
[ +0.000011] mpi_resize+0x13c/0x1d0
[ +0.000011] mpi_powm+0xd24/0x1570
[ +0.000009] rsa_enc+0x1a4/0x30c
[ +0.000009] pkcs1pad_verify+0x3f0/0x580
[ +0.000009] public_key_verify_signature+0x7a8/0xba4
[ +0.000010] public_key_verify_signature_2+0x40/0x60
[ +0.000008] verify_signature+0xb4/0x114
[ +0.000008] pkcs7_validate_trust_one.constprop.0+0x3b8/0x574
[ +0.000009] pkcs7_validate_trust+0xb8/0x15c
[ +0.000008] verify_pkcs7_message_sig+0xec/0x1b0
[ +0.000012] verify_pkcs7_signature+0x78/0xac
[ +0.000007] mod_verify_sig+0x110/0x190
[ +0.000009] module_sig_check+0x114/0x1e0
[ +0.000009] load_module+0xa0/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000008] __arm64_sys_init_module+0x78/0xb0
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0x1a8/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000013] Freed by task 2422:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000009] kasan_set_track+0x2c/0x40
[ +0.000007] kasan_set_free_info+0x28/0x50
[ +0.000009] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000010] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000009] devres_release_group+0x180/0x270
[ +0.000008] take_down_aggregate_device+0xcc/0x160
[ +0.000010] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000013] platform_remove+0x64/0xb0
[ +0.000008] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000009] platform_driver_unregister+0x20/0x2c
[ +0.000007] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000009] __arm64_sys_delete_module+0x5c/0x80
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000008] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000013] The buggy address belongs to the object at ffff00003da29000
which belongs to the cache kmalloc-1k of size 1024
[ +0.000008] The buggy address is located 496 bytes inside of
1024-byte region [ffff00003da29000, ffff00003da29400)
[ +0.000015] The buggy address belongs to the physical page:
[ +0.000009] page:fffffc0000f68a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3da28
[ +0.000012] head:fffffc0000f68a00 order:3 compound_mapcount:0 compound_pincount:0
[ +0.000009] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[ +0.000019] raw: 0ffff00000010200 fffffc0000eb5c08 fffffc0000d96608 ffff000000002a80
[ +0.000008] raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000
[ +0.000008] page dumped because: kasan: bad access detected
[ +0.000011] Memory state around the buggy address:
[ +0.000009] ffff00003da29080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ffff00003da29100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] >ffff00003da29180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ^
[ +0.000008] ffff00003da29200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000006] ffff00003da29280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ==================================================================
Fix by keeping track of which encoders were initialised in the meson_drm
structure and manually removing their bridges at aggregate driver's unbind
time.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220920222842.1053234-1-adrian.larumbe@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8616f2a0589a80e08434212324250eb22f6a66ce ]
Because component_master_del wasn't being called when unloading the
meson_drm module, the aggregate device would linger forever in the global
aggregate_devices list. That means when unloading and reloading the
meson_dw_hdmi module, component_add would call into
try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate
device.
This would in turn dereference some of the aggregate_device's struct
entries which point to memory automatically freed by the devres API when
unbinding the aggregate device from meson_drv_unbind, and trigger an
use-after-free bug:
[ +0.000014] =============================================================
[ +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500
[ +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536
[ +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000005] dump_backtrace+0x1ec/0x280
[ +0.000011] show_stack+0x24/0x80
[ +0.000007] dump_stack_lvl+0x98/0xd4
[ +0.000010] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000007] kasan_report+0xb8/0xfc
[ +0.000007] __asan_report_load8_noabort+0x3c/0x50
[ +0.000009] find_components+0x468/0x500
[ +0.000008] try_to_bring_up_aggregate_device+0x64/0x390
[ +0.000009] __component_add+0x1dc/0x49c
[ +0.000009] component_add+0x20/0x30
[ +0.000008] meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi]
[ +0.000013] platform_probe+0xd0/0x220
[ +0.000008] really_probe+0x3ac/0xa80
[ +0.000008] __driver_probe_device+0x1f8/0x400
[ +0.000008] driver_probe_device+0x68/0x1b0
[ +0.000008] __driver_attach+0x20c/0x480
[ +0.000009] bus_for_each_dev+0x114/0x1b0
[ +0.000007] driver_attach+0x48/0x64
[ +0.000009] bus_add_driver+0x390/0x564
[ +0.000007] driver_register+0x1a8/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000007] meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi]
[ +0.000014] do_one_initcall+0xc4/0x2b0
[ +0.000008] do_init_module+0x154/0x570
[ +0.000010] load_module+0x1a78/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000008] __arm64_sys_init_module+0x78/0xb0
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000008] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000014] Allocated by task 902:
[ +0.000007] kasan_save_stack+0x2c/0x5c
[ +0.000009] __kasan_kmalloc+0x90/0xd0
[ +0.000007] __kmalloc_node+0x240/0x580
[ +0.000010] memcg_alloc_slab_cgroups+0xa4/0x1ac
[ +0.000010] memcg_slab_post_alloc_hook+0xbc/0x4c0
[ +0.000008] kmem_cache_alloc_node+0x1d0/0x490
[ +0.000009] __alloc_skb+0x1d4/0x310
[ +0.000010] alloc_skb_with_frags+0x8c/0x620
[ +0.000008] sock_alloc_send_pskb+0x5ac/0x6d0
[ +0.000010] unix_dgram_sendmsg+0x2e0/0x12f0
[ +0.000010] sock_sendmsg+0xcc/0x110
[ +0.000007] sock_write_iter+0x1d0/0x304
[ +0.000008] new_sync_write+0x364/0x460
[ +0.000007] vfs_write+0x420/0x5ac
[ +0.000008] ksys_write+0x19c/0x1f0
[ +0.000008] __arm64_sys_write+0x78/0xb0
[ +0.000007] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0x1a8/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000008] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000013] Freed by task 2509:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000007] kasan_set_track+0x2c/0x40
[ +0.000008] kasan_set_free_info+0x28/0x50
[ +0.000008] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000010] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000008] devres_release_all+0xfc/0x180
[ +0.000008] device_unbind_cleanup+0x24/0x164
[ +0.000008] device_release_driver_internal+0x3e8/0x5b0
[ +0.000010] driver_detach+0xac/0x1b0
[ +0.000008] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000009] platform_driver_unregister+0x20/0x2c
[ +0.000007] 0xffff800003722d98
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000009] __arm64_sys_delete_module+0x5c/0x80
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000008] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000013] Last potentially related work creation:
[ +0.000007] kasan_save_stack+0x2c/0x5c
[ +0.000007] __kasan_record_aux_stack+0xb8/0xf0
[ +0.000009] kasan_record_aux_stack_noalloc+0x14/0x20
[ +0.000008] insert_work+0x54/0x290
[ +0.000009] __queue_work+0x48c/0xd24
[ +0.000008] queue_work_on+0x90/0x11c
[ +0.000008] call_usermodehelper_exec+0x188/0x404
[ +0.000010] kobject_uevent_env+0x5a8/0x794
[ +0.000010] kobject_uevent+0x14/0x20
[ +0.000008] driver_register+0x230/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000007] gxbb_driver_init+0x28/0x34
[ +0.000010] do_one_initcall+0xc4/0x2b0
[ +0.000008] do_initcalls+0x20c/0x24c
[ +0.000010] kernel_init_freeable+0x22c/0x278
[ +0.000009] kernel_init+0x3c/0x170
[ +0.000008] ret_from_fork+0x10/0x20
[ +0.000013] The buggy address belongs to the object at ffff000006731600
which belongs to the cache kmalloc-256 of size 256
[ +0.000009] The buggy address is located 136 bytes inside of
256-byte region [ffff000006731600, ffff000006731700)
[ +0.000015] The buggy address belongs to the physical page:
[ +0.000008] page:fffffc000019cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff000006730a00 pfn:0x6730
[ +0.000011] head:fffffc000019cc00 order:2 compound_mapcount:0 compound_pincount:0
[ +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[ +0.000016] raw: 0ffff00000010200 fffffc00000c3d08 fffffc0000ef2b08 ffff000000002680
[ +0.000009] raw: ffff000006730a00 0000000000150014 00000001ffffffff 0000000000000000
[ +0.000006] page dumped because: kasan: bad access detected
[ +0.000011] Memory state around the buggy address:
[ +0.000007] ffff000006731580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ +0.000007] ffff000006731600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] >ffff000006731680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ^
[ +0.000006] ffff000006731700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ +0.000007] ffff000006731780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ +0.000006] ==================================================================
Fix by adding 'remove' driver callback for meson-drm, and explicitly deleting the
aggregate device.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-3-adrian.larumbe@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31c519981eb141c7ec39bfd5be25d35f02edb868 ]
Unloading the driver triggers the following KASAN warning:
[ +0.006275] =============================================================
[ +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0
[ +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695
[ +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000007] dump_backtrace+0x1ec/0x280
[ +0.000013] show_stack+0x24/0x80
[ +0.000008] dump_stack_lvl+0x98/0xd4
[ +0.000011] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000007] kasan_report+0xb8/0xfc
[ +0.000008] __asan_report_load8_noabort+0x3c/0x50
[ +0.000010] __list_del_entry_valid+0xe0/0x1a0
[ +0.000009] drm_atomic_private_obj_fini+0x30/0x200 [drm]
[ +0.000172] drm_bridge_detach+0x94/0x260 [drm]
[ +0.000145] drm_encoder_cleanup+0xa4/0x290 [drm]
[ +0.000144] drm_mode_config_cleanup+0x118/0x740 [drm]
[ +0.000143] drm_mode_config_init_release+0x1c/0x2c [drm]
[ +0.000144] drm_managed_release+0x170/0x414 [drm]
[ +0.000142] drm_dev_put.part.0+0xc0/0x124 [drm]
[ +0.000143] drm_dev_put+0x20/0x30 [drm]
[ +0.000142] meson_drv_unbind+0x1d8/0x2ac [meson_drm]
[ +0.000028] take_down_aggregate_device+0xb0/0x160
[ +0.000016] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000015] platform_remove+0x64/0xb0
[ +0.000009] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000009] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000011] __arm64_sys_delete_module+0x5c/0x80
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000012] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000018] Allocated by task 0:
[ +0.000007] (stack is not available)
[ +0.000011] Freed by task 2695:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000011] kasan_set_track+0x2c/0x40
[ +0.000008] kasan_set_free_info+0x28/0x50
[ +0.000009] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000011] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000009] devres_release_group+0x180/0x270
[ +0.000008] component_unbind+0x128/0x1e0
[ +0.000010] component_unbind_all+0x1b8/0x264
[ +0.000009] meson_drv_unbind+0x1a0/0x2ac [meson_drm]
[ +0.000025] take_down_aggregate_device+0xb0/0x160
[ +0.000009] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000012] platform_remove+0x64/0xb0
[ +0.000008] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000011] __do_sys_delete_module+0x288/0x400
[ +0.000010] __arm64_sys_delete_module+0x5c/0x80
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000014] The buggy address belongs to the object at ffff000020c39000
which belongs to the cache kmalloc-4k of size 4096
[ +0.000008] The buggy address is located 1504 bytes inside of
4096-byte region [ffff000020c39000, ffff000020c3a000)
[ +0.000016] The buggy address belongs to the physical page:
[ +0.000009] page:fffffc0000830e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20c38
[ +0.000013] head:fffffc0000830e00 order:3 compound_mapcount:0 compound_pincount:0
[ +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[ +0.000019] raw: 0ffff00000010200 fffffc0000fd4808 fffffc0000126208 ffff000000002e80
[ +0.000009] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000
[ +0.000008] page dumped because: kasan: bad access detected
[ +0.000011] Memory state around the buggy address:
[ +0.000008] ffff000020c39480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ffff000020c39500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] >ffff000020c39580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ^
[ +0.000007] ffff000020c39600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ffff000020c39680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000006] ==================================================================
The reason this is happening is unloading meson-dw-hdmi will cause the
component API to take down the aggregate device, which in turn will cause
all devres-managed memory to be freed, including the struct dw_hdmi
allocated in dw_hdmi_probe. This struct embeds a struct drm_bridge that is
added at the end of the function, and which is later on picked up in
meson_encoder_hdmi_init.
However, when attaching the bridge to the encoder created in
meson_encoder_hdmi_init, it's linked to the encoder's bridge chain, from
where it never leaves, even after devres_release_group is called when the
driver's components are unbound and the embedding structure freed.
Then, when calling drm_dev_put in the aggregate driver's unbind function,
drm_bridge_detach is called for every single bridge linked to the encoder,
including the one whose memory had already been deallocated.
Fix by calling component_unbind_all after drm_dev_put.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-2-adrian.larumbe@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4bb71fce58f30df3f251118291d6b0187ce531e6 ]
This got lost somewhere along the way, This fixes
audio not working until set_property was called.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 796d6a37ff5ffaf9f2dc0f3f4bf9f4a1034c00de ]
[Why]
Hostvm should be enabled/disabled accordding to
the status of riommu_active, but hostvm always
be disabled on DCN31 which causes underflow
[How]
Set correct hostvm flag on DCN31
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sherry Wang <Yao.Wang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e7f2f4cd67443ce308480ca461806fcc3456e0ba ]
[Why]
The urgent latency override is useful when debugging issues
relating to underflow.
Current overridden variable is not correct and has no effect
on DCN3.2 and DCN3.21 DML calculations.
[How]
For DCN3.2 and DCN3.21, override the correct urgent latency
variable when bounding box override is present.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3913f0179ba366f7d7d160c506ce00de1602bbc4 ]
SDMA update page table may be called from unlocked context, this
generate below warning. Use unlocked iterator to handle this case.
WARNING: CPU: 0 PID: 1475 at
drivers/dma-buf/dma-resv.c:483 dma_resv_iter_next
Call Trace:
dma_resv_iter_first+0x43/0xa0
amdgpu_vm_sdma_update+0x69/0x2d0 [amdgpu]
amdgpu_vm_ptes_update+0x29c/0x870 [amdgpu]
amdgpu_vm_update_range+0x2f6/0x6c0 [amdgpu]
svm_range_unmap_from_gpus+0x115/0x300 [amdgpu]
svm_range_cpu_invalidate_pagetables+0x510/0x5e0 [amdgpu]
__mmu_notifier_invalidate_range_start+0x1d3/0x230
unmap_vmas+0x140/0x150
unmap_region+0xa8/0x110
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
autoloading
[ Upstream commit 2a2565272a3628e45d61625e36ef17af7af4e3de ]
On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not
properly autoload.
This is likely caused by issues with how systemd-udevd handles the single
quote char (') which is part of the sys_vendor / chassis_vendor strings
on this laptop. As a workaround remove the single quote char + everything
behind it from the sys_vendor + chassis_vendor matches. This fixes
the module not autoloading.
Link: https://github.com/systemd/systemd/issues/24715
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220917210407.647432-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 00b1829294b7c88ecba92c661fbe6fe347b364d2 ]
Error 0x06 (invalid command parameter) is reported by hp-wmi module
when reading the current thermal profile and then proceed to set it
back. The failing condition occurs in Linux NixOS after user
configures the thermal profile to ‘quiet mode’ in Windows. Quiet Fan
Mode is supported in Windows but was not supported in hp-wmi module.
This fix adds support for PLATFORM_PROFILE_QUIET in hp-wmi module for
HP notebooks other than HP Omen series. Quiet thermal profile is not
supported in HP Omen series notebooks.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220912192603.4001-1-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8edd2752b0aa498b3a61f3caee8f79f7e0567fad ]
cros_ec_handle_event in the cros_ec driver can notify the PM of wake
events. When a device is suspended, cros_ec_handle_event will not check
MKBP events. Instead, received MKBP events are checked during resume by
cros_ec_report_events_during_suspend. But
cros_ec_report_events_during_suspend cannot notify the PM if received
events are wake events, causing wake events to not be reported if
received while the device is suspended.
Update cros_ec_report_events_during_suspend to notify the PM of wake
events during resume by calling pm_wakeup_event.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220913204954.2931042-1-jthies@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e10ea7b9b90219da305a16b3c1252169715a807b ]
Yet another x86 gaming handheld.
This one has many SKUs with quite a few of DMI strings,
so let's just use a catchall, just as with Aya Neo Next.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220825191946.1678798-1-maccraft123mc@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 770e19076065e079a32f33eb11be2057c87f1cde ]
This device is another x86 gaming handheld, and as (hopefully) there is
only one set of DMI IDs it's using DMI_EXACT_MATCH
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803182402.1217293-1-maccraft123mc@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30d7565be96b3946c18a1ce3fd538f7946839092 ]
This commit fixes vertical timings of the VEC (composite output) modes
to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R
standards.
Previous timings were actually defined as 502 and 601 lines, resulting
in non-standard 62.69 Hz and 52 Hz signals being generated,
respectively.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 828418259254863e0af5805bd712284e2bd88e3b ]
[Why]
There is no CG(Clock Gating)/PG(Power Gating) requirement on SRIOV VF.
For multi VF, VF should not enable any CG/PG features.
For one VF, PF will program CG/PG related registers.
[How]
Do not set any cg/pg flag bit at early init under sriov.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1026c6f319724dc88fc08d9d9d35bcbdf492b42 ]
[Why]
VF should not program these registers, the value were defined in the host.
[How]
Skip writing them in SRIOV environment and program them on host side.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45a92f45f4578ff89da7dc5ef50bab4ef870f3b7 ]
Fixes the following smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:311 dc_dmub_srv_p_state_delegate()
warn: variable dereferenced before check 'dc' (see line 309)
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da09daf881082266e4075657fac53c7966de8e4d ]
There are two events that signal a real change of the link state: HPD going
high means the sink is newly connected or wants the source to re-read the
EDID, RX sense going low is a indication that the link has been disconnected.
Ignore the other two events that also trigger interrupts, but don't need
immediate attention: HPD going low does not necessarily mean the link has
been lost and should not trigger a immediate read of the status. RX sense
going high also does not require a detect cycle, as HPD going high is the
right point in time to read the EDID.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v1)
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6160216fd2c97107e8a9ab39863b056d677fcd85 ]
This patch fix potential memory leak (clk_src) when function run
into last return NULL.
s/free/kfree/ - Alex
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32c9b75640aeb1b144f9e2963c1640f4cef7c6f2 ]
Not everyone can get what "critclks" means in the message, improve
it to make less cryptic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9c04a1b7a15b5e74b2977461d9511e497f05d8f ]
When userspace tries to map the dmabuf and if for some reason
(e.g. OOM) the creation of the sg table fails, ubuf->sg needs to be
set to NULL. Otherwise, when the userspace subsequently closes the
dmabuf fd, we'd try to erroneously free the invalid sg table from
release_udmabuf resulting in the following crash reported by syzbot:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 3609 Comm: syz-executor487 Not tainted
5.19.0-syzkaller-13930-g7ebfc85e2cd7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 07/22/2022
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 04 00 00 48 8d 7d 0c 4c
8b 63 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14
02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 e2
RSP: 0018:ffffc900037efd30 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff8cb67800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff84ad27e0 RDI: 0000000000000000
RBP: fffffffffffffff4 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000008c07c R12: ffff88801fa05000
R13: ffff888073db07e8 R14: ffff888025c25440 R15: 0000000000000000
FS: 0000555555fc4300(0000) GS:ffff8880b9a00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc1c0ce06e4 CR3: 00000000715e6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dma_buf_release+0x157/0x2d0 drivers/dma-buf/dma-buf.c:78
__dentry_kill+0x42b/0x640 fs/dcache.c:612
dentry_kill fs/dcache.c:733 [inline]
dput+0x806/0xdb0 fs/dcache.c:913
__fput+0x39c/0x9d0 fs/file_table.c:333
task_work_run+0xdd/0x1a0 kernel/task_work.c:177
ptrace_notify+0x114/0x140 kernel/signal.c:2353
ptrace_report_syscall include/linux/ptrace.h:420 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:482 [inline]
syscall_exit_work kernel/entry/common.c:249 [inline]
syscall_exit_to_user_mode_prepare+0x129/0x280 kernel/entry/common.c:276
__syscall_exit_to_user_mode_work kernel/entry/common.c:281 [inline]
syscall_exit_to_user_mode+0x9/0x50 kernel/entry/common.c:294
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc1c0c35b6b
Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24
0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44
RSP: 002b:00007ffd78a06090 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1c0c35b6b
RDX: 0000000020000280 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 0000000000000007 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000000c
R13: 0000000000000003 R14: 00007fc1c0cfe4a0 R15: 00007ffd78a06140
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Reported-by: syzbot+c80e9ef5d8bb45894db0@syzkaller.appspotmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220825063522.801264-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ae0632d17759852c07e2d1e0a31c728eb6ba246 ]
The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about
integer overflow, because it is treated as a positive value, which is
then negated. The temporary positive value is not necessarily
representable.
This causes the following warning:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19:
warning: integer overflow in expression ‘-9223372036854775808’ of type
‘long long int’ results in ‘-9223372036854775808’ [-Woverflow]
30 | (int64_t)(-(1LL << 63))
| ^
Writing out (-MAX_I64 - 1) works instead.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef8886f321c5dab8124b9153d25afa2a71d05323 ]
A NULL check for bridge->encoder shows that it may be NULL, but it
already been dereferenced on all paths leading to the check.
812 if (!bridge->encoder) {
Dereference the pointer bridge->encoder.
810 drm_connector_attach_encoder(<9611->connector, bridge->encoder);
Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220727073119.1578972-1-zengjx95@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eaa225b6b52233d45457fd33730e1528c604d92d ]
Komeda driver relies on the generic DRM atomic helper functions to handle
commits. It only implements an atomic_commit_tail hook for the
mode_config_helper_funcs and even that one is pretty close to the generic
implementation with the exception of additional dma_fence signalling.
What the generic helper framework doesn't do is waiting for the actual
hardware to signal that the commit parameters have been written into the
appropriate registers. As we signal CRTC events only on the irq handlers,
we need to flush the configuration and wait for the hardware to respond.
Add the Komeda specific implementation for atomic_commit_hw_done() that
flushes and waits for flip done before calling drm_atomic_helper_commit_hw_done().
The fix was prompted by a patch from Carsten Haitzler where he was trying to
solve the same issue but in a different way that I think can lead to wrong
event signaling to userspace.
Reported-by: Carsten Haitzler <carsten.haitzler@arm.com>
Tested-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Carsten Haitzler <carsten.haitzler@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220722122139.288486-1-liviu.dudau@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6ee30407e883042482ad4ad30da5eaba47872ee ]
There are some struct drm_driver fields that are required by drivers since
drm_copy_field() attempts to copy them to user-space via DRM_IOCTL_VERSION.
But it can be possible that a driver has a bug and did not set some of the
fields, which leads to drm_copy_field() attempting to copy a NULL pointer:
[ +10.395966] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[ +0.010955] Mem abort info:
[ +0.002835] ESR = 0x0000000096000004
[ +0.003872] EC = 0x25: DABT (current EL), IL = 32 bits
[ +0.005395] SET = 0, FnV = 0
[ +0.003113] EA = 0, S1PTW = 0
[ +0.003182] FSC = 0x04: level 0 translation fault
[ +0.004964] Data abort info:
[ +0.002919] ISV = 0, ISS = 0x00000004
[ +0.003886] CM = 0, WnR = 0
[ +0.003040] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000115dad000
[ +0.006536] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ +0.006925] Internal error: Oops: 96000004 [#1] SMP
...
[ +0.011113] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ +0.007061] pc : __pi_strlen+0x14/0x150
[ +0.003895] lr : drm_copy_field+0x30/0x1a4
[ +0.004156] sp : ffff8000094b3a50
[ +0.003355] x29: ffff8000094b3a50 x28: ffff8000094b3b70 x27: 0000000000000040
[ +0.007242] x26: ffff443743c2ba00 x25: 0000000000000000 x24: 0000000000000040
[ +0.007243] x23: ffff443743c2ba00 x22: ffff8000094b3b70 x21: 0000000000000000
[ +0.007241] x20: 0000000000000000 x19: ffff8000094b3b90 x18: 0000000000000000
[ +0.007241] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab14b9af40
[ +0.007241] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ +0.007239] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa524ad67d4d8
[ +0.007242] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : 6c6e6263606e7141
[ +0.007239] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ +0.007241] x2 : 0000000000000000 x1 : ffff8000094b3b90 x0 : 0000000000000000
[ +0.007240] Call trace:
[ +0.002475] __pi_strlen+0x14/0x150
[ +0.003537] drm_version+0x84/0xac
[ +0.003448] drm_ioctl_kernel+0xa8/0x16c
[ +0.003975] drm_ioctl+0x270/0x580
[ +0.003448] __arm64_sys_ioctl+0xb8/0xfc
[ +0.003978] invoke_syscall+0x78/0x100
[ +0.003799] el0_svc_common.constprop.0+0x4c/0xf4
[ +0.004767] do_el0_svc+0x38/0x4c
[ +0.003357] el0_svc+0x34/0x100
[ +0.003185] el0t_64_sync_handler+0x11c/0x150
[ +0.004418] el0t_64_sync+0x190/0x194
[ +0.003716] Code: 92402c04 b200c3e8 f13fc09f 5400088c (a9400c02)
[ +0.006180] ---[ end trace 0000000000000000 ]---
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-3-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 94dc3471d1b2b58b3728558d0e3f264e9ce6ff59 ]
The strlen() function returns a size_t which is an unsigned int on 32-bit
arches and an unsigned long on 64-bit arches. But in the drm_copy_field()
function, the strlen() return value is assigned to an 'int len' variable.
Later, the len variable is passed as copy_from_user() third argument that
is an unsigned long parameter as well.
In theory, this can lead to an integer overflow via type conversion. Since
the assignment happens to a signed int lvalue instead of a size_t lvalue.
In practice though, that's unlikely since the values copied are set by DRM
drivers and not controlled by userspace. But using a size_t for len is the
correct thing to do anyways.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-2-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6dc548745d5b5102e3c53dc5097296ac270b6c69 ]
nouveau_bo_alloc() allocates a memory chunk for "nvbo" with kzalloc().
When some error occurs, "nvbo" should be released. But when
WARN_ON(pi < 0)) equals true, the function return ERR_PTR without
releasing the "nvbo", which will lead to a memory leak.
We should release the "nvbo" with kfree() if WARN_ON(pi < 0)) equals true.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705094306.2244103-1-niejianglei2021@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93e2be344a7db169b7119de21ac1bf253b8c6907 ]
My system shows almost 10 million of these messages over a 24-hour
period which pollutes my logs.
Signed-off-by: Andrew Gaul <gaul@google.com>
Link: https://lore.kernel.org/r/20221002034128.2026653-1-gaul@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
