summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-02-28CAN: add controller hardware name for Softing cardsKurt Van Dijck1-0/+1
I just found that the controller hardware name is not set for the Softing driver. After this patch, "$ ip -d link show" looks nicer. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28drivers:isdn:istream.c Fix typo pice to pieceJustin Mattock1-1/+1
The below patch changes a typo "pice" to "piece" Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28fmvj18x_cs: add new idKen Kawasaki2-0/+2
fmvj18x_cs:add new id Toshiba lan&modem multifuction card (model name:IPC5010A) Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28bnx2x: Add a missing bit for PXP parity register of 57712.Vladislav Zolotarov1-1/+1
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25skge: don't mark carrier down at startStephen Hemminger1-3/+0
The API for network devices has changed so that setting carrier off at probe is no longer required. This should fix the IPv6 addrconf issue. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=29612 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reported-by: George Billios <gbillios@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24Merge branch 'r8169-davem' of ↵David S. Miller1-19/+23
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-02-24Added support for usb ethernet (0x0fe6, 0x9700)Shahar Havivi1-0/+4
The device is very similar to (0x0fe6, 0x8101), And works well with dm9601 driver. Signed-off-by: Shahar Havivi <shaharh@redhat.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24r8169: fix RTL8168DP power off issue.Hayes Wang1-3/+14
- fix the RTL8111DP turn off the power when DASH is enabled. - RTL_GIGA_MAC_VER_27 must wait for tx finish before reset. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-24r8169: correct settings of rtl8102e.Hayes Wang1-14/+6
Adjust and remove certain settings of RTL8102E which are for previous chips. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-24r8169: fix incorrect args to oob notify.Hayes Wang1-2/+3
It results in the wrong point address and influences RTL8168DP. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-24DM9000B: Fix PHY power for network down/upHenry Nestler1-3/+4
DM9000 revision B needs 1 ms delay after PHY power-on. PHY must be powered on by writing 0 into register DM9000_GPR before all other settings will change (see Davicom spec and example code). Remember, that register DM9000_GPR was not changed by reset sequence. Without this fix the FIFO is out of sync and sends wrong data after sequence of "ifconfig ethX down ; ifconfig ethX up". Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24DM9000B: Fix reg_save after spin_lock in dm9000_timeoutHenry Nestler1-1/+1
The spin_lock should hold before reading register. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'master' of ↵David S. Miller9-84/+119
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-22sfc: lower stack usage in efx_ethtool_self_testEric Dumazet1-9/+13
drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’: drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes is larger than 1024 bytes Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-21p54pci: update receive dma buffers before and after processingChristian Lamparter1-5/+9
Documentation/DMA-API-HOWTO.txt states: "DMA transfers need to be synced properly in order for the cpu and device to see the most uptodate and correct copy of the DMA buffer." Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Fix WPA TKIP Michael MIC failures.Gertjan van Wingerde2-0/+12
As reported and found by Johannes Stezenbach: rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check the Michael MIC in hardware. Therefore we have to report to mac80211 that the received frame does not include the Michael MIC. https://bugzilla.kernel.org/show_bug.cgi?id=16608 Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21ath5k: Fix fast channel switchingNick Kossifidis1-55/+87
Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC https://bugzilla.kernel.org/show_bug.cgi?id=27382 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-19Merge branch 'rtc-for-linus' of ↵Linus Torvalds3-4/+135
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Re-enable UIE timer/polling emulation RTC: Revert UIE emulation removal RTC: Release mutex in error path of rtc_alarm_irq_enable
2011-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds20-172/+266
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) net: deinit automatic LIST_HEAD net: dont leave active on stack LIST_HEAD net: provide default_advmss() methods to blackhole dst_ops tg3: Restrict phy ioctl access drivers/net: Call netif_carrier_off at the end of the probe ixgbe: work around for DDP last buffer size ixgbe: fix panic due to uninitialised pointer e1000e: flush all writebacks before unload e1000e: check down flag in tasks isdn: hisax: Use l2headersize() instead of dup (and buggy) func. arp_notify: unconditionally send gratuitous ARP for NETDEV_NOTIFY_PEERS. cxgb4vf: Use defined Mailbox Timeout cxgb4vf: Quiesce Virtual Interfaces on shutdown ... cxgb4vf: Behave properly when CONFIG_DEBUG_FS isn't defined ... cxgb4vf: Check driver parameters in the right place ... pch_gbe: Fix the MAC Address load issue. iwlwifi: Delete iwl3945_good_plcp_health. net/can/softing: make CAN_SOFTING_CS depend on CAN_SOFTING netfilter: nf_iterate: fix incorrect RCU usage pch_gbe: Fix the issue that the receiving data is not normal. ...
2011-02-19ath5k: Correct channel setting for AR2317 chipNikolay Ledovskikh1-0/+1
Correct channel setting function must be used for AR2317. When I tested ahb patch on bullet2 all seemed to work fine, but it couldn't connect another host (using ibss for example). During an analysis I observed that it's transmitting on another channel. I looked into madwifi code and understood that the problem is in channel setting function. So atheros RF2317 not fully handled in the current ath5k version and must be patched. Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-19wireless: rt2x00: rt2800pci.c: add two idsXose Vazquez Perez1-0/+2
taken two RT35XX EDIMAX from DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-19Merge branch 'master' of ↵John W. Linville2-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6
2011-02-18Merge branch 'for-linus/bugfixes' of git://xenbits.xen.org/people/ianc/linux-2.6Linus Torvalds1-0/+10
* 'for-linus/bugfixes' of git://xenbits.xen.org/people/ianc/linux-2.6: xen: suspend and resume system devices when running PVHVM
2011-02-18Merge branch 'fixes-2.6.38' of ↵Linus Torvalds8-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq * 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies long workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable' workqueue: wake up a worker when a rescuer is leaving a gcwq
2011-02-18Merge branch 'drm-fixes' of ↵Linus Torvalds8-37/+45
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add missing frac fb div flag for dce4+ drm/radeon/kms: do not reject X16 and Y16X16 floating-point formats on r300 drm/nouveau: fix suspend/resume on GPUs that don't have PM support drm/nouveau: flips/flipd need to always set 'evict' for move_accel_cleanup() drm/nv40: fix tiling-related setup for a number of chipsets drm/nouveau: fix non-EDIDful native mode selection drm/nouveau: Fix detection of DDC-based LVDS on DCB15 boards. drm/nv04-nv40: Fix NULL dereference when we fail to find an LVDS native mode. drm/nv10: Fix crash when allocating a BO larger than half the available VRAM.
2011-02-18Merge branch 'for-linus' of ↵Linus Torvalds2-13/+24
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Prevent double completions after a timeout or RNR error IB/qib: Fix double add_timer() RDMA/nes: Don't generate async events for unregistered devices
2011-02-18RTC: Re-enable UIE timer/polling emulationJohn Stultz2-2/+18
This patch re-enables UIE timer/polling emulation for rtc devices that do not support alarm irqs. CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-18RTC: Revert UIE emulation removalJohn Stultz2-0/+116
Uwe pointed out that my alarm based UIE emulation is not sufficient to replace the older timer/polling based UIE emulation on devices where there is no alarm irq. This causes rtc devices without alarms to return -EINVAL to UIE ioctls. The fix is to re-instate the old timer/polling method for devices without alarm irqs. This patch reverts the following commits: 042620a018afcfba1d678062b62e46 - Remove UIE emulation 1daeddd5962acad1bea55e524fc0fa - Cleanup removed UIE emulation declaration b5cc8ca1c9c3a37eaddf709b2fd3e1 - Remove Kconfig symbol for UIE emulation The emulation mode will still need to be wired-in with a following patch before it will work. CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-18RTC: Release mutex in error path of rtc_alarm_irq_enableUwe Kleine-König1-3/+2
On hardware that doesn't support alarm interrupts, rtc_alarm_irq_enable could return without releasing the ops_lock mutex. This was introduced in aa0be0f (RTC: Propagate error handling via rtc_timer_enqueue properly) This patch corrects the issue by only returning once the mutex is released. [john.stultz: Reworded the commit log] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-18tg3: Restrict phy ioctl accessMatt Carlson1-2/+6
If management firmware is present and the device is down, the firmware will assume control of the phy. If a phy access were allowed from the host, it will collide with firmware phy accesses, resulting in unpredictable behavior. This patch fixes the problem by disallowing phy accesses during the problematic condition. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18drivers/net: Call netif_carrier_off at the end of the probeIvan Vecera2-0/+4
Without calling of netif_carrier_off at the end of the probe the operstate is unknown when the device is initially opened. By default the carrier is on so when the device is opened and netif_carrier_on is called the link watch event is not fired and operstate remains zero (unknown). This patch fixes this behavior in forcedeth and r8169. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18Merge branches 'nes' and 'qib' into for-nextRoland Dreier1-1/+4
2011-02-18IB/qib: Prevent double completions after a timeout or RNR errorMike Marciniszyn1-1/+2
There is a double completion associated with error handling for RC QPs. The sequence is: - The do_rc_ack() routine fields an RNR nack and there are 0 rnr_retries configured on the QP. - qib_error_qp() stops the pending timer - qib_rc_send_complete() is called from sdma_complete() - qib_rc_send_complete() starts the timer because the msb of the psn just completed says an ack is needed. - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP - rc_timeout() calls qib_restart_rc() - qib_restart_rc() calls qib_send_complete() with a IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the past The fix avoids starting the timer since another packet will never arrive. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-17xen: suspend and resume system devices when running PVHVMIan Campbell1-0/+10
Otherwise we fail to properly suspend/resume all of the emulated devices. Something between 2.6.38-rc2 and rc3 appears to have exposed this issue, but it's always been wrong not to do this. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
2011-02-17ixgbe: work around for DDP last buffer sizeAmir Hanania2-1/+52
A HW limitation was recently discovered where the last buffer in a DDP offload cannot be a full buffer size in length. Fix the issue with a work around by adding another buffer with size = 1. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-17ixgbe: fix panic due to uninitialised pointerAndy Gospodarek1-2/+4
Systems containing an 82599EB and running a backported driver from upstream were panicing on boot. It turns out hw->mac.ops.setup_sfp is only set for 82599, so one should check to be sure that pointer is set before continuing in ixgbe_sfp_config_module_task. I verified by inspection that the upstream driver has the same issue and also added a check before the call in ixgbe_sfp_link_config. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-17e1000e: flush all writebacks before unloadJesse Brandeburg1-10/+21
The driver was not flushing all writebacks before unloading, possibly causing memory to be written by the hardware after the driver had reinitialized the rings. This adds missing functionality to flush any pending writebacks and is called in all spots where descriptors should be completed before the driver begins processing. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-17e1000e: check down flag in tasksJesse Brandeburg1-0/+21
This change is part of a fix to avoid any tasks running while the driver is exiting and deinitializing resources. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-17Merge remote branch 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next ↵Dave Airlie6-36/+40
into drm-fixes * 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: drm/nouveau: fix suspend/resume on GPUs that don't have PM support drm/nouveau: flips/flipd need to always set 'evict' for move_accel_cleanup() drm/nv40: fix tiling-related setup for a number of chipsets drm/nouveau: fix non-EDIDful native mode selection drm/nouveau: Fix detection of DDC-based LVDS on DCB15 boards. drm/nv04-nv40: Fix NULL dereference when we fail to find an LVDS native mode. drm/nv10: Fix crash when allocating a BO larger than half the available VRAM.
2011-02-17drm/radeon/kms: add missing frac fb div flag for dce4+Alex Deucher1-1/+3
The fixed ref/post dividers are set by the AdjustPll table rather than the ss info table on dce4+. Make sure we enable the fractional feedback dividers when using a fixed post or ref divider on them as well. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=29272 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-17drm/radeon/kms: do not reject X16 and Y16X16 floating-point formats on r300Marek Olšák1-0/+2
Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-17drm/nouveau: fix suspend/resume on GPUs that don't have PM supportBen Skeggs1-1/+1
This has been broken since 2.6.37, and fixes resume on a couple of fermi boards I have access to. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-40/+21
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi/pxa2xx pci: fix the release - remove race
2011-02-17drm/nouveau: flips/flipd need to always set 'evict' for move_accel_cleanup()Ben Skeggs1-3/+3
We free the temporary binding before leaving this function, so we also have to wait for the move to actually complete. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nv40: fix tiling-related setup for a number of chipsetsBen Skeggs1-19/+27
Due to the default case handling the older chipsets, a bunch of the newer ones ended up having the wrong tiling regs used. This commit switches the default case to handle the newest chipsets. This also makes nv4e touch the "extra" tiling regs. "nv" doesn't touch them for C51 but traces of the NVIDIA binary driver show it being done there. I couldn't find NV41/NV45 traces to confirm the behaviour there, but an educated guess was taken at each of them. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nouveau: fix non-EDIDful native mode selectionBen Skeggs1-0/+1
The DRM core fills this value, but at too late a stage for this to work, possibly resulting in an undesirable mode being selected. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nouveau: Fix detection of DDC-based LVDS on DCB15 boards.Francisco Jerez1-1/+1
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nv04-nv40: Fix NULL dereference when we fail to find an LVDS native mode.Francisco Jerez1-9/+3
Reported-by: Alex Buell <alex.buell@munted.org.uk> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nv10: Fix crash when allocating a BO larger than half the available VRAM.Francisco Jerez1-3/+4
Reported-by: Alex Buell <alex.buell@munted.org.uk> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-16Bluetooth: Add Atheros BT AR5BBU12 fw supportedCho, Yu-Chen2-0/+6
Add the btusb.c blacklist [0489:e02c] for Atheros AR5BBU12 BT and add to ath3k.c supported this device. Signed-off-by: Cho, Yu-Chen <acho@novell.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-11 16:30:52 +0300