summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-01-17regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()Dan Carpenter1-3/+1
commit f6bcb4c7f366905b66ce8ffca7190118244bb642 upstream. This code will leak "map->debugfs_name" because the if statement is reversed so it only frees NULL pointers instead of non-NULL. In fact the if statement is not required and should just be removed because kfree() accepts NULL pointers. Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net: mvpp2: disable force link UP during port init procedureStefan Chulski1-1/+13
commit 87508224485323ce2d4e7fb929ec80f51adcc238 upstream. Force link UP can be enabled by bootloader during tftpboot and breaks NFS support. Force link UP disabled during port init procedure. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17regulator: qcom-rpmh-regulator: correct hfsmps515 definitionDmitry Baryshkov1-1/+1
commit df6b92fa40050e59ea89784294bf6d04c0c47705 upstream. According to the datasheet pm8009's HFS515 regulators have 16mV resolution rather than declared 1.6 mV. Correct the resolution. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17wan: ds26522: select CONFIG_BITREVERSEArnd Bergmann1-0/+1
commit 69931e11288520c250152180ecf9b6ac5e6e40ed upstream. Without this, the driver runs into a link failure arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe': slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write': slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table' Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17regmap: debugfs: Fix a memory leak when calling regmap_attach_devXiaolei Wang1-2/+9
commit cffa4b2122f5f3e53cf3d529bbc74651f95856d5 upstream. After initializing the regmap through syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the device, because the debugfs_name has been allocated, there is no need to redistribute it again unreferenced object 0xd8399b80 (size 64): comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s) hex dump (first 32 bytes): 64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72 dummy-iomuxc-gpr 40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69 @20e4000..R[.~Bi backtrace: [<ca384d6f>] kasprintf+0x2c/0x54 [<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc [<bc4181da>] __regmap_init+0xc38/0xd88 [<1f7e0609>] of_syscon_register+0x168/0x294 [<735e8766>] device_node_get_regmap+0x6c/0x98 [<d96c8982>] imx6ul_init_machine+0x20/0x88 [<0456565b>] customize_machine+0x1c/0x30 [<d07393d8>] do_one_initcall+0x80/0x3ac [<7e584867>] kernel_init_freeable+0x170/0x1f0 [<80074741>] kernel_init+0x8/0x120 [<285d6f28>] ret_from_fork+0x14/0x20 [<00000000>] 0x0 Fixes: 9b947a13e7f6 ("regmap: use debugfs even when no device") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net/mlx5e: Fix two double free casesDinghao Liu1-0/+2
commit 7a6eb072a9548492ead086f3e820e9aac71c7138 upstream. mlx5e_create_ttc_table_groups() frees ft->g on failure of kvzalloc(), but such failure will be caught by its caller in mlx5e_create_ttc_table() and ft->g will be freed again in mlx5e_destroy_flow_table(). The same issue also occurs in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after kfree() to avoid double free. Fixes: 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets") Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net/mlx5e: Fix memleak in mlx5e_create_l2_table_groupsDinghao Liu1-0/+1
commit 5b0bb12c58ac7d22e05b5bfdaa30a116c8c32e32 upstream. When mlx5_create_flow_group() fails, ft->g should be freed just like when kvzalloc() fails. The caller of mlx5e_create_l2_table_groups() does not catch this issue on failure, which leads to memleak. Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17iommu/intel: Fix memleak in intel_irq_remapping_allocDinghao Liu1-0/+2
commit ff2b46d7cff80d27d82f7f3252711f4ca1666129 upstream. When irq_domain_get_irq_data() or irqd_cfg() fails at i == 0, data allocated by kzalloc() has not been freed before returning, which leads to memleak. Fixes: b106ee63abcc ("irq_remapping/vt-d: Enhance Intel IR driver to support hierarchical irqdomains") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210105051837.32118-1-dinghao.liu@zju.edu.cn Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17lightnvm: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit 19cd3403cb0d522dd5e10188eef85817de29e26e upstream. Without CRC32 support, this fails to link: arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init': pblk-init.c:(.text+0x2654): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit': pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le' Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17block: rsxx: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit 36a106a4c1c100d55ba3d32a21ef748cfcd4fa99 upstream. Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config': config.c:(.text+0x124): undefined reference to `crc32_le' Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17wil6210: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit e186620d7bf11b274b985b839c38266d7918cc05 upstream. Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify': fw.c:(.text+0x74c): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow Fixes: 151a9706503f ("wil6210: firmware download") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17qed: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit 2860d45a589818dd8ffd90cdc4bcf77f36a5a6be upstream. Without this, the driver fails to link: lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump': qed_debug.c:(.text+0x4068): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump': qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump': qed_debug.c:(.text+0x6000): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump': qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow Fixes: 7a4b21b7d1f0 ("qed: Add nvram selftest") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17dmaengine: xilinx_dma: fix mixed_enum_type coverity warningShravya Kumbham1-1/+1
commit 2d5efea64472469117dc1a9a39530069e95b21e9 upstream. Typecast the fls(width -1) with (enum dmaengine_alignment) in xilinx_dma_chan_probe function to fix the coverity warning. Addresses-Coverity: Event mixed_enum_type. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()Shravya Kumbham1-1/+2
commit faeb0731be0a31e2246b21a85fa7dabbd750101d upstream. In xilinx_dma_child_probe function, the nr_channels variable is passed to of_property_read_u32() which expects an u32 return value pointer. Modify the nr_channels variable type from int to u32 to fix the incompatible parameter coverity warning. Addresses-Coverity: Event incompatible_param. Fixes: 1a9e7a03c761 ("dmaengine: vdma: Add support for mulit-channel dma mode") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17dmaengine: xilinx_dma: check dma_async_device_register return valueShravya Kumbham1-1/+5
commit 99974aedbd73523969afb09f33c6e3047cd0ddae upstream. dma_async_device_register() can return non-zero error code. Add condition to check the return value of dma_async_device_register function and handle the error path. Addresses-Coverity: Event check_return. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling ↵Christophe JAILLET1-0/+1
path of the probe function commit 33cbd54dc515cc04b5a603603414222b4bb1448d upstream. 'mtk_hsdma_hw_deinit()' should be called in the error handling path of the probe function to undo a previous 'mtk_hsdma_hw_init()' call, as already done in the remove function. Fixes: 548c4597e984 ("dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201219124718.182664-1-christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminatedHans de Goede1-1/+1
commit 0b3ea2a06de1f52ea30865e227e109a5fd3b6214 upstream. gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to it to be terminated with a zero-ed out entry. So we need to allocate one more entry then we will use. Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17spi: stm32: FIFO threshold level - fix align packet sizeRoman Guskov1-2/+2
commit a590370d918fc66c62df6620445791fbe840344a upstream. if cur_bpw <= 8 and xfer_len < 4 then the value of fthlv will be 1 and SPI registers content may have been lost. * If SPI data register is accessed as a 16-bit register and DSIZE <= 8bit, better to select FTHLV = 2, 4, 6 etc * If SPI data register is accessed as a 32-bit register and DSIZE > 8bit, better to select FTHLV = 2, 4, 6 etc, while if DSIZE <= 8bit, better to select FTHLV = 4, 8, 12 etc Signed-off-by: Roman Guskov <rguskov@dh-electronics.com> Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20201221123532.27272-1-rguskov@dh-electronics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get()Colin Ian King1-6/+3
commit 943bdd0cecad06da8392a33093230e30e501eccc upstream. Currently there is an unlikely case where cpufreq_cpu_get() returns a NULL policy and this will cause a NULL pointer dereference later on. Fix this by passing the policy to transition_frequency_fidvid() from the caller and hence eliminating the need for the cpufreq_cpu_get() and cpufreq_cpu_put(). Thanks to Viresh Kumar for suggesting the fix. Addresses-Coverity: ("Dereference null return") Fixes: b43a7ffbf33b ("cpufreq: Notify all policy->cpus in cpufreq_notify_transition()") Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17can: kvaser_pciefd: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit 1d48595c786b1b9dc6be301e8d7f6fc74e9882aa upstream. Without crc32, this driver fails to link: arm-linux-gnueabi-ld: drivers/net/can/kvaser_pciefd.o: in function `kvaser_pciefd_probe': kvaser_pciefd.c:(.text+0x2b0): undefined reference to `crc32_be' Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17can: m_can: m_can_class_unregister(): remove erroneous m_can_clk_stop()Marc Kleine-Budde1-2/+0
commit c4aec381ab98c9189d47b935832541d520f1f67f upstream. In m_can_class_register() the clock is started, but stopped on exit. When calling m_can_class_unregister(), the clock is stopped a second time. This patch removes the erroneous m_can_clk_stop() in m_can_class_unregister(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Cc: Dan Murphy <dmurphy@ti.com> Cc: Sriram Dash <sriram.dash@samsung.com> Reviewed-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20201215103238.524029-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17can: tcan4x5x: fix bittiming const, use common bittiming from m_can driverMarc Kleine-Budde1-26/+0
commit aee2b3ccc8a63d1cd7da6a8a153d1f3712d40826 upstream. According to the TCAN4550 datasheet "SLLSF91 - DECEMBER 2018" the tcan4x5x has the same bittiming constants as a m_can revision 3.2.x/3.3.0. The tcan4x5x chip I'm using identifies itself as m_can revision 3.2.1, so remove the tcan4x5x specific bittiming values and rely on the values in the m_can driver, which are selected according to core revision. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: Dan Murphy <dmurphy@ti.com> Reviewed-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20201215103238.524029-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk()Dan Carpenter1-2/+2
commit 595a334148449bd1d27cf5d6fcb3b0d718cb1b9f upstream. If the dw_edma_alloc_burst() function fails then we free "chunk" but it's still on the "desc->chunk->list" list so it will lead to a use after free. Also the "->chunks_alloc" count is incremented when it shouldn't be. In current kernels small allocations are guaranteed to succeed and dw_edma_alloc_burst() can't fail so this will not actually affect runtime. Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/X9dTBFrUPEvvW7qc@mwanda Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17i2c: sprd: use a specific timeout to avoid system hang up issueChunyan Zhang1-1/+7
commit 0b884fe71f9ee6a5df35e677154256ea2099ebb8 upstream. If the i2c device SCL bus being pulled up due to some exception before message transfer done, the system cannot receive the completing interrupt signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT jiffies eclipse, that would make the system seemed hang up. To avoid that happen, this patch adds a specific timeout for message transfer. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Linhua Xu <linhua.xu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> [wsa: changed errno to ETIMEDOUT] Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17HID: wacom: Fix memory leakage caused by kfifo_allocPing Cheng1-3/+32
commit 37309f47e2f5674f3e86cb765312ace42cfcedf5 upstream. As reported by syzbot below, kfifo_alloc'd memory would not be freed if a non-zero return value is triggered in wacom_probe. This patch creates and uses devm_kfifo_alloc to allocate and free itself. BUG: memory leak unreferenced object 0xffff88810dc44a00 (size 512): comm "kworker/1:2", pid 3674, jiffies 4294943617 (age 14.100s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000023e1afac>] kmalloc_array include/linux/slab.h:592 [inline] [<0000000023e1afac>] __kfifo_alloc+0xad/0x100 lib/kfifo.c:43 [<00000000c477f737>] wacom_probe+0x1a1/0x3b0 drivers/hid/wacom_sys.c:2727 [<00000000b3109aca>] hid_device_probe+0x16b/0x210 drivers/hid/hid-core.c:2281 [<00000000aff7c640>] really_probe+0x159/0x480 drivers/base/dd.c:554 [<00000000778d0bc3>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738 [<000000005108dbb5>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844 [<00000000efb7c59e>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<0000000024ab1590>] __device_attach+0x122/0x250 drivers/base/dd.c:912 [<000000004c7ac048>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000b93050a3>] device_add+0x5ac/0xc30 drivers/base/core.c:2936 [<00000000e5b46ea5>] hid_add_device+0x151/0x390 drivers/hid/hid-core.c:2437 [<00000000c6add147>] usbhid_probe+0x412/0x560 drivers/hid/usbhid/hid-core.c:1407 [<00000000c33acdb4>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000aff7c640>] really_probe+0x159/0x480 drivers/base/dd.c:554 [<00000000778d0bc3>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738 [<000000005108dbb5>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844 https://syzkaller.appspot.com/bug?extid=5b49c9695968d7250a26 Reported-by: syzbot+5b49c9695968d7250a26@syzkaller.appspotmail.com Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17iio: imu: st_lsm6dsx: fix edge-trigger interruptsLorenzo Bianconi1-5/+21
commit 3f9bce7a22a3f8ac9d885c9d75bc45569f24ac8b upstream If we are using edge IRQs, new samples can arrive while processing current interrupt since there are no hw guarantees the irq line stays "low" long enough to properly detect the new interrupt. In this case the new sample will be missed. Polling FIFO status register in st_lsm6dsx_handler_thread routine allow us to read new samples even if the interrupt arrives while processing previous data and the timeslot where the line is "low" is too short to be properly detected. Fixes: 89ca88a7cdf2 ("iio: imu: st_lsm6dsx: support active-low interrupts") Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/5e93cda7dc1e665f5685c53ad8e9ea71dbae782d.1605378871.git.lorenzo@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [sudip: manual backport to old irq handler path] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17exfat: Month timestamp metadata accidentally incrementedValdis Klētnieks1-1/+1
The staging/exfat driver has departed, but a lot of distros are still tracking 5.4-stable, so we should fix this. There was an 0/1 offset error in month handling for file metadata, causing the month to get incremented on each reference to the file. Thanks to Sebastian Gurtler for troubleshooting this, and Arpad Mueller for bringing it to my attention. Relevant discussions: https://bugzilla.kernel.org/show_bug.cgi?id=210997 https://bugs.launchpad.net/ubuntu/+source/ubuntu-meta/+bug/1872504 Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17chtls: Fix chtls resources release sequenceAyush Sawal1-5/+4
[ Upstream commit 15ef6b0e30b354253e2c10b3836bc59767eb162b ] CPL_ABORT_RPL is sent after releasing the resources by calling chtls_release_resources(sk); and chtls_conn_done(sk); eventually causing kernel panic. Fixing it by calling release in appropriate order. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17chtls: Added a check to avoid NULL pointer dereferenceAyush Sawal1-0/+5
[ Upstream commit eade1e0a4fb31d48eeb1589d9bb859ae4dd6181d ] In case of server removal lookup_stid() may return NULL pointer, which is used as listen_ctx. So added a check before accessing this pointer. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17chtls: Replace skb_dequeue with skb_peekAyush Sawal1-1/+1
[ Upstream commit a84b2c0d5fa23da6d6c8c0d5f5c93184a2744d3e ] The skb is unlinked twice, one in __skb_dequeue in function chtls_reset_synq() and another in cleanup_syn_rcv_conn(). So in this patch using skb_peek() instead of __skb_dequeue(), so that unlink will be handled only in cleanup_syn_rcv_conn(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17chtls: Fix panic when route to peer not configuredAyush Sawal1-2/+12
[ Upstream commit 5a5fac9966bb6d513198634b0b1357be7e8447d2 ] If route to peer is not configured, we might get non tls devices from dst_neigh_lookup() which is invalid, adding a check to avoid it. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17chtls: Remove invalid set_tcb callAyush Sawal1-3/+0
[ Upstream commit 827d329105bfde6701f0077e34a09c4a86e27145 ] At the time of SYN_RECV, connection information is not initialized at FW, updating tcb flag over uninitialized connection causes adapter crash. We don't need to update the flag during SYN_RECV state, so avoid this. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17chtls: Fix hardware tid leakAyush Sawal1-36/+3
[ Upstream commit 717df0f4cdc9044c415431a3522b3e9ccca5b4a3 ] send_abort_rpl() is not calculating cpl_abort_req_rss offset and ends up sending wrong TID with abort_rpl WR causng tid leaks. Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is redundant. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net/mlx5e: ethtool, Fix restriction of autoneg with 56GAya Levin1-6/+18
[ Upstream commit b1c0aca3d3ddeebeec57ada9c2df9ed647939249 ] Prior to this patch, configuring speed to 50G with autoneg off over devices supporting 50G per lane failed. Support for 50G per lane introduced a new set of link-modes, on which driver always performed a speed validation as if only legacy link-modes were configured. Fix driver speed validation to force setting autoneg over 56G only if in legacy link-mode. Fixes: 3d7cadae51f1 ("net/mlx5e: ethtool, Fix analysis of speed setting") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net/mlx5: Use port_num 1 instead of 0 when delete a RoCE addressMark Zhang1-1/+1
[ Upstream commit 0f2dcade69f2af56b74bce432e48ff3957830ce2 ] In multi-port mode, FW reports syndrome 0x2ea48 (invalid vhca_port_number) if the port_num is not 1 or 2. Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbEAleksander Jan Bajkowski1-3/+4
[ Upstream commit 3545454c7801e391b0d966f82c98614d45394770 ] Exclude RMII from modes that report 1 GbE support. Reduced MII supports up to 100 MbE. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17s390/qeth: fix L2 header access in qeth_l3_osa_features_check()Julian Wiedmann1-1/+1
[ Upstream commit f9c4845385c8f6631ebd5dddfb019ea7a285fba4 ] ip_finish_output_gso() may call .ndo_features_check() even before the skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt to inspect the L2 header via vlan_eth_hdr(). Switch to vlan_get_protocol(), as already used further down in the common qeth_features_check() path. Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17octeontx2-af: fix memory leak of lmac and lmac->nameColin Ian King1-3/+11
[ Upstream commit ac7996d680d8b4a51bb99bbdcee3dc838b985498 ] Currently the error return paths don't kfree lmac and lmac->name leading to some memory leaks. Fix this by adding two error return paths that kfree these objects Addresses-Coverity: ("Resource leak") Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net/sonic: Fix some resource leaks in error handling pathsChristophe JAILLET2-4/+15
[ Upstream commit 0f7ba7bc46fa0b574ccacf5672991b321e028492 ] A call to dma_alloc_coherent() is wrapped by sonic_alloc_descriptors(). This is correctly freed in the remove function, but not in the error handling path of the probe function. Fix this by adding the missing dma_free_coherent() call. While at it, rename a label in order to be slightly more informative. Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Chris Zankel <chris@zankel.net> References: commit 10e3cc180e64 ("net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'") Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net: stmmac: dwmac-sun8i: Balance internal PHY powerSamuel Holland1-8/+23
[ Upstream commit b8239638853e3e37b287e4bd4d57b41f14c78550 ] sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This caused PHY power to remain off after a suspend/resume cycle. Fix this by recording if PHY power should be restored, and if so, restoring it. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net: stmmac: dwmac-sun8i: Balance internal PHY resource referencesSamuel Holland1-6/+21
[ Upstream commit 529254216773acd5039c07aa18cf06fd1f9fccdd ] While stmmac_pltfr_remove calls sun8i_dwmac_exit, the sun8i_dwmac_init and sun8i_dwmac_exit functions are also called by the stmmac_platform suspend/resume callbacks. They may be called many times during the device's lifetime and should not release resources used by the driver. Furthermore, there was no error handling in case registering the MDIO mux failed during probe, and the EPHY clock was never released at all. Fix all of these issues by moving the deinitialization code to a driver removal callback. Also ensure the EPHY is powered down before removal. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net: hns3: fix a phy loopback fail issueYonglong Liu1-1/+2
[ Upstream commit f04bbcbf1e38d192e94bbfa126731a52332c40b1 ] When phy driver does not implement the set_loopback interface, phy loopback test will return -EOPNOTSUPP, and the loopback test will fail. So when phy driver does not implement the set_loopback interface, don't do phy loopback test. Fixes: c9765a89d142 ("net: hns3: add phy selftest function") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net: hns3: fix the number of queues actually used by ARQYufeng Mo1-2/+2
[ Upstream commit 65e61e3c2a619c4d4b873885b2d5394025ed117b ] HCLGE_MBX_MAX_ARQ_MSG_NUM is used to apply memory for the number of queues used by ARQ(Asynchronous Receive Queue), so the head and tail pointers should also use this macro. Fixes: 07a0556a3a73 ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net: cdc_ncm: correct overhead in delayed_ndp_sizeJouni K. Seppänen1-2/+6
[ Upstream commit 7a68d725e4ea384977445e0bcaed3d7de83ab5b3 ] Aligning to tx_ndp_modulus is not sufficient because the next align call can be cdc_ncm_align_tail, which can add up to ctx->tx_modulus + ctx->tx_remainder - 1 bytes. This used to lead to occasional crashes on a Huawei 909s-120 LTE module as follows: - the condition marked /* if there is a remaining skb [...] */ is true so the swaps happen - skb_out is set from ctx->tx_curr_skb - skb_out->len is exactly 0x3f52 - ctx->tx_curr_size is 0x4000 and delayed_ndp_size is 0xac (note that the sum of skb_out->len and delayed_ndp_size is 0x3ffe) - the for loop over n is executed once - the cdc_ncm_align_tail call marked /* align beginning of next frame */ increases skb_out->len to 0x3f56 (the sum is now 0x4002) - the condition marked /* check if we had enough room left [...] */ is false so we break out of the loop - the condition marked /* If requested, put NDP at end of frame. */ is true so the NDP is written into skb_out - now skb_out->len is 0x4002, so padding_count is minus two interpreted as an unsigned number, which is used as the length argument to memset, leading to a crash with various symptoms but usually including > Call Trace: > <IRQ> > cdc_ncm_fill_tx_frame+0x83a/0x970 [cdc_ncm] > cdc_mbim_tx_fixup+0x1d9/0x240 [cdc_mbim] > usbnet_start_xmit+0x5d/0x720 [usbnet] The cdc_ncm_align_tail call first aligns on a ctx->tx_modulus boundary (adding at most ctx->tx_modulus-1 bytes), then adds ctx->tx_remainder bytes. Alternatively, the next alignment call can occur in cdc_ncm_ndp16 or cdc_ncm_ndp32, in which case at most ctx->tx_ndp_modulus-1 bytes are added. A similar problem has occurred before, and the code is nontrivial to reason about, so add a guard before the crashing call. By that time it is too late to prevent any memory corruption (we'll have written past the end of the buffer already) but we can at least try to get a warning written into an on-disk log by avoiding the hard crash caused by padding past the buffer with a huge number of zeros. Signed-off-by: Jouni K. Seppänen <jks@iki.fi> Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209407 Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17vfio iommu: Add dma available capabilityMatthew Rosato1-0/+22
[ Upstream commit 7d6e1329652ed971d1b6e0e7bea66fba5044e271 ] The following functional changes were needed for backport: - vfio_iommu_type1_get_info doesn't exist, call vfio_iommu_dma_avail_build_caps from vfio_iommu_type1_ioctl. - As further fallout from this, vfio_iommu_dma_avail_build_caps must acquire and release the iommu mutex lock. To do so, the return value is stored in a local variable as in vfio_iommu_iova_build_caps. Upstream commit description: Commit 492855939bdb ("vfio/type1: Limit DMA mappings per container") added the ability to limit the number of memory backed DMA mappings. However on s390x, when lazy mapping is in use, we use a very large number of concurrent mappings. Let's provide the current allowable number of DMA mappings to userspace via the IOMMU info chain so that userspace can take appropriate mitigation. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12scsi: target: Fix XCOPY NAA identifier lookupDavid Disseldorp2-49/+71
commit 2896c93811e39d63a4d9b63ccf12a8fbc226e5e4 upstream. When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12drm/i915: clear the gpu reloc batchMatthew Auld1-1/+3
commit 641382e9b44fba81a0778e1914ee35b8471121f9 upstream. The reloc batch is short lived but can exist in the user visible ppGTT, and since it's backed by an internal object, which lacks page clearing, we should take care to clear it upfront. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201224151358.401345-2-matthew.auld@intel.com Cc: stable@vger.kernel.org (cherry picked from commit 26ebc511e799f621357982ccc37a7987a56a00f4) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12dmabuf: fix use-after-free of dmabuf's file->f_inodeCharan Teja Reddy1-4/+17
commit 05cd84691eafcd7959a1e120d5e72c0dd98c5d91 upstream. It is observed 'use-after-free' on the dmabuf's file->f_inode with the race between closing the dmabuf file and reading the dmabuf's debug info. Consider the below scenario where P1 is closing the dma_buf file and P2 is reading the dma_buf's debug info in the system: P1 P2 dma_buf_debug_show() dma_buf_put() __fput() file->f_op->release() dput() .... dentry_unlink_inode() iput(dentry->d_inode) (where the inode is freed) mutex_lock(&db_list.lock) read 'dma_buf->file->f_inode' (the same inode is freed by P1) mutex_unlock(&db_list.lock) dentry->d_op->d_release()--> dma_buf_release() ..... mutex_lock(&db_list.lock) removes the dmabuf from the list mutex_unlock(&db_list.lock) In the above scenario, when dma_buf_put() is called on a dma_buf, it first frees the dma_buf's file->f_inode(=dentry->d_inode) and then removes this dma_buf from the system db_list. In between P2 traversing the db_list tries to access this dma_buf's file->f_inode that was freed by P1 which is a use-after-free case. Since, __fput() calls f_op->release first and then later calls the d_op->d_release, move the dma_buf's db_list removal from d_release() to f_op->release(). This ensures that dma_buf's file->f_inode is not accessed after it is released. Cc: <stable@vger.kernel.org> # 5.4.x- Fixes: 4ab59c3c638c ("dma-buf: Move dma_buf_release() from fops to dentry_ops") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1609857399-31549-1-git-send-email-charante@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12Revert "device property: Keep secondary firmware node secondary by type"Bard Liao1-1/+1
commit 47f4469970d8861bc06d2d4d45ac8200ff07c693 upstream. While commit d5dcce0c414f ("device property: Keep secondary firmware node secondary by type") describes everything correct in its commit message, the change it made does the opposite and original commit c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") was fully correct. Revert the former one here and improve documentation in the next patch. Fixes: d5dcce0c414f ("device property: Keep secondary firmware node secondary by type") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12USB: serial: keyspan_pda: remove unused variableJohan Hovold1-2/+0
Remove an unused variable which was mistakingly left by commit 37faf5061541 ("USB: serial: keyspan_pda: fix write-wakeup use-after-free") and only removed by a later change. This is needed to suppress a W=1 warning about the unused variable in the stable trees that the build bots triggers. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-18 01:21:28 +0300