| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I am seeing a constant stream of warnings on my cx23885 based card:
cx23885_tuner_callback(): Unknown command 0x2.
Add a check in cx23885_tuner_callback to silence it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Get the HVR-1255 analog support working for all supported inputs. This
includes introduction of a new board profile for an OEM variant which
doesn't have all the same inputs as the retail version of the board.
Validated with the following boards:
HVR-1255 (0070:2259)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The analog support in the cx23885 driver was completely broken for the
HVR-1250. Add the necessary code.
Note that this only implements analog for the composite and s-video
inputs. The tuner input continues to be non-functional due to a lack of
analog support in the mt2131 driver.
Validated with the following boards:
HVR-1250 (0070:7911)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The location of the vsrc/hsrc registers moved in the cx23888, causing
the s_mbus call to fail prematurely indicating that "720x480 is not a
valid size". The function bailed out before many pertinent registers
were set related to the scaler (causing unexpected results in video
rendering when doing raw video capture).
Use the correct registers for the cx23888.
Validated with the following boards:
HVR-1800 retail (0070:7801)
HVR-1800 OEM (0070:7809)
HVR-1850 retail (0070:8541)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Reported-by: Jonathan <sitten74490@mypacks.net>
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The refactoring of the cx25840 driver to support the cx23888 caused breakage
with the existing support for cx23885/cx23887 analog audio support. Tweak
the code so that it only uses the code if it really is a cx23888 instead of
applying it to all cx2388x based devices.
Validated with the following boards:
HVR-1800 retail (0070:7801)
HVR-1800 OEM (0070:7809)
HVR_1850 retail (0070:8541)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Reported-by: Jonathan <sitten74490@mypacks.net>
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix regression in HVR-1800 analog support hue/saturation controls.
The changes made for the cx23888 caused regressions in the analog
support for cx23885/cx23887 based boards (partly due to changes in the
locations of the hue/saturation controls). As a result the wrong
registers were being overwritten.
Add code to use the correct registers if it's a cx23888
Validated with the following boards:
HVR-1800 retail (0070:7801)
HVR-1800 OEM (0070:7809)
HVR-1850 retail (0070:8541)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Reported-by: Jonathan <sitten74490@mypacks.net>
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The refactoring of the cx25840 driver to support the cx23888 caused breakage
with the existing support for cx23885/cx23887 analog support. Rework the
routines such that the new code is only used for the 888.
Validated with the following boards:
HVR-1800 retail (0070:7801)
HVR-1800 OEM (0070:7809)
HVR_1850 retail (0070:8541)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Reported-by: Jonathan <sitten74490@mypacks.net>
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fixed bugs in functions that initialize custom controls.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Commit 7a6f6c29d264cdd2fe0eb3d923217eed5f0ad134 (cx231xx: use
URB_NO_TRANSFER_DMA_MAP) was intended to avoid mapping the DMA buffer
for URB twice. This works for the URBs allocated with usb_alloc_urb(),
as those are allocated from cohernent DMA pools, but the flag was also
added for the VBI and audio URBs, which have a manually allocated area.
This leaves the random trash in the structure after allocation as the
DMA address, corrupting memory and preventing VBI and audio from
working. Letting the USB core map the buffers solves the problem.
Cc: stable@kernel.org
Signed-off-by: David Dillow <dave@thedillows.org>
Cc: Sri Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The logic that checks if a device has remote control is wrong.
Due to that, the em28xx RC module is not loaded by default.
Fix the logic, in order to make it work properly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
There is a missing "up_write()" here. Semaphore should be released
before returning error value.
Cc: stable@kernel.org
Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Stops the media entity pipeline which was started earlier
if fimc_pipeline_validate fails.
[s.nawrocki: reworked to not exceed 80 characters line length]
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This patch is an update to changed media_entity_pipeline_start()
signature in commit af88be3887c1a0b20d0792c3c237a67c73ef3286,
"media: Add link_validate() op to check links to the sink pad"
It fixes the following warning:
drivers/media/video/s5p-fimc/fimc-lite.c: In function ‘fimc_lite_streamon’:
drivers/media/video/s5p-fimc/fimc-lite.c:765:29: warning: ignoring return value
of ‘media_entity_pipeline_start’, declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Take into account media_entity_pipeline_start() may fail.
[s.nawrocki: rebased onto latest tree]
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Commit 77e7c4e624404c6edb5686b3d5f873c6008ed6b0
"v4l: Allow changing control handler lock" changed
the lock field of struct v4l2_ctrl_handler to a pointer
and this driver wasn't updated properly. This patch fixes
following warning:
drivers/media/video/s5p-fimc/fimc-core.c: In function ‘fimc_ctrls_activate’:
drivers/media/video/s5p-fimc/fimc-core.c:644: warning: passing argument 1 of ‘mutex_lock’ from incompatible pointer type
include/linux/mutex.h:152: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’
drivers/media/video/s5p-fimc/fimc-core.c:663: warning: passing argument 1 of ‘mutex_unlock’ from incompatible pointer type
include/linux/mutex.h:169: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Shorten pixel format descriptions that exceed 32 characters
so they're not being truncated when queried from user space.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Only suspend the video pipeline devices if they were active before
the pm.suspend() helper is called. This patch prevents following error:
/# echo mem > /sys/power/state
[ 34.965000] PM: Syncing filesystems ... done.
[ 35.035000] Freezing user space processes ... (elapsed 0.01 seconds) done.
...
[ 35.105000] dpm_run_callback(): platform_pm_suspend+0x0/0x5c returns -22
[ 35.105000] PM: Device exynos-fimc-lite.1 failed to suspend: error -22
[ 35.105000] PM: Some devices failed to suspend
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The camera clocks managed by the driver were improperly reference counted
and remained disabled when multiple video nodes were opened simultaneously.
It manifested itself with following warning:
[12.920000] WARNING: at drivers/media/video/s5p-fimc/fimc-mdevice.c:787 __fimc_md_set_camclk+0x1c0/0x1dc()
[13.005000] Modules linked in:
[13.005000] Backtrace:
[13.040000] [<c0013084>] (dump_backtrace+0x0/0x10c) from [<c0454b70>] (dump_stack+0x18/0x1c)
[13.070000] r7:00000009 r6:00000313 r5:c02d576c r4:00000000
[13.155000] [<c0454b58>] (dump_stack+0x0/0x1c) from [<c0022ec4>] (warn_slowpath_common+0x54/0x6c)
[13.285000] [<c0022e70>] (warn_slowpath_common+0x0/0x6c) from [<c0022f00>] (warn_slowpath_null+0x24/0x2c)
[13.360000] r9:e1981010 r8:00000000 r7:c061d3fc r6:e1981010 r5:e1981030
[13.430000] r4:00000000
[13.430000] [<c0022edc>] (warn_slowpath_null+0x0/0x2c) from [<c02d576c>] (__fimc_md_set_camclk+0x1c0/0x1dc)
[13.550000] [<c02d55ac>] (__fimc_md_set_camclk+0x0/0x1dc) from [<c02d57b0>] (fimc_md_set_camclk+0x28/0x2c)
[13.630000] [<c02d5788>] (fimc_md_set_camclk+0x0/0x2c) from [<c02d57e8>] (__fimc_pipeline_shutdown+0x34/0x50)
[13.705000] [<c02d57b4>] (__fimc_pipeline_shutdown+0x0/0x50) from [<c02d5844>] (fimc_pipeline_shutdown+0x40/0x58)
[13.765000] r5:e2391200 r4:e2357704
[13.805000] [<c02d5804>] (fimc_pipeline_shutdown+0x0/0x58) from [<c02d4754>] (fimc_capture_close+0xcc/0xe4)
[13.915000] r5:e1b396c0 r4:e2357410
[13.915000] [<c02d4688>] (fimc_capture_close+0x0/0xe4) from [<c02b2d5c>] (v4l2_release+0x5c/0x80)
[13.970000] r7:00000010 r6:e1d2d990 r5:e1b396c0 r4:e2394800
[14.000000] [<c02b2d00>] (v4l2_release+0x0/0x80) from [<c00b66cc>] (fput+0xc0/0x22c)
[14.015000] r5:c157ef30 r4:e1b396c0
[14.015000] [<c00b660c>] (fput+0x0/0x22c) from [<c00b2ca0>] (filp_close+0x60/0x80)
[14.080000] [<c00b2c40>] (filp_close+0x0/0x80) from [<c00b2d78>] (sys_close+0xb8/0xf4)
[14.125000] r7:00000001 r6:e1b396c0 r5:c1400340 r4:c1400300
[14.125000] [<c00b2cc0>] (sys_close+0x0/0xf4) from [<c000f300>] (ret_fast_syscall+0x0/0x30)
[14.205000] r7:00000006 r6:beee5b94 r5:00000003 r4:b6f64fac
Fix this, as well as potential memory leaks due to not calling
v4l2_fh_release() on some error paths.
Also remove some error logs printed for events that aren't critical and
are normal conditions for some system configurations.
Also check if the device have been properly run-time enabled during
video node open.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The checks are already done at the v4l2 framework.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Allow memory buffer size to be increased by means of
struct v4l2_pix_plane_format::sizeimage at VIDIOC_S_FMT ioctl.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The driver is supposed to create active media link from sensor N
(or its corresponding s5p-mipi-csis entity) to FIMC.N by default.
Instead s5p-mipi-csis.N entity gets always connected by a default
active link to FIMC.N, regardless of there are parallel bus sensor
entities already connected to FIMC.N. Correct this.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
When video pipeline initialization fails, the ST_CAPT_BUSY flag
needs to be cleared before pm_runtime_put_sync is called.
Otherwise the runtime suspend routine tries to suspend device,
rather than just turning it off. Also fix potential null pointer
dereference in fimc_pipeline_shutdown().
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
drivers/media/video/pms.c uses kzalloc() and kfree() so it should
include <linux/slab.h> to fix build errors and a warning.
drivers/media/video/pms.c:1047:2: error: implicit declaration of function 'kzalloc'
drivers/media/video/pms.c:1047:6: warning: assignment makes pointer from integer without a cast
drivers/media/video/pms.c:1116:2: error: implicit declaration of function 'kfree'
Found in mmotm but applies to mainline.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
smiapp-core.c:2472:3: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix a compiler breakage introduced by commit 8173090acb33:
drivers/media/video/pms.c: In function ‘pms_probe’:
drivers/media/video/pms.c:1047:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration]
drivers/media/video/pms.c:1116:2: error: implicit declaration of function ‘kfree’ [-Werror=implicit-function-declaration]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix compile of smia code.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43337
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fixed the size of the V4L2_CID_COLORFX control cluster.
Prior to this fix V4L2_CID_ROTATE was also icluded in
the cluster preventing application from enabling rotation.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fixes the following error:
ERROR: open brace '{' following enum go on the same line
+enum MFC_SHM_OFS
+{
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fixed s_ctrl function when setting the following controls:
- V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER
- V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Image size for MFC encoder should have size between
8x4 and 1920x1080 with even width and height.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Patch corrects definition of H264 level control and
changes bare numbers to enums in two other cases.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The mem2mem_testdev allows multiple instances to be opened in parallel.
Source and destination queue data are being shared between all
instances, which can lead to kernel oops due to race conditions (most
likely to happen inside device_run()).
Attached patch fixes mentioned problem by storing queue data per device
context.
Signed-off-by: Tomasz Moń <desowin@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fixed the code copying timecode/timestamp to corresponding
frames between OUTPUT and CAPTURE.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix an incorrect modulation type bitmask. This allows QAM256 also to be
correctly reported.
Signed-off-by: Janne Huttunen <jahuttun@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This simply shows a little warning if the board does not have remote
control support. This should make it easier for users to see if they
have misconfigured their system or if the driver simply does not have
rc-support for their card (yet).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The Cinergy HTC Stick HD uses the same remote control as the TerraTec
Cinergy XS products. Thus the same keymap could be re-used.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Initialize the spinlock for each hardware time.
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This reverts commit d509835e32bd761a2b7b446034a273da568e5573. That commit
breaks support for the generic pass-through mode in the driver for formats,
not natively supported by it. Besides due to a merge conflict it also breaks
driver compilation:
drivers/media/video/mx2_camera.c: In function 'mx2_camera_set_bus_param':
drivers/media/video/mx2_camera.c:937: error: 'pixfmt' undeclared (first use in this function)
drivers/media/video/mx2_camera.c:937: error: (Each undeclared identifier is reported only once
drivers/media/video/mx2_camera.c:937: error: for each function it appears in.)
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix the documentation of the Y4 and Y6 formats.
Fix a poll() issue, add support for enum_frmsizes, set the proper
parent device and fix a few compliance issues.
Tested with an actual Connectix B&W parallel port webcam, both on a
little-endian and a big-endian platform. This driver has never been
so good, doing 320x240 at 1 frame per second :-)
I know, nobody cares, but still it is cool that linux can still support
this old webcam.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Tested with a HVR-1300.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
base_addr has type resource_size_t, which may be 64 bits.
Also fix a few endian issues related to mailboxes and firmware loading.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
base_addr has type resource_size_t, which may be 64 bits on a 32-bit ppc.
Tested on my ppc board.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The frequency range of the current tuner (radio or TV) was returned
instead of the frequency range of the requested tuner (which depends
on the device node).
This bug caused the frequency range of the radio tuner to be returned
when G_TUNER was called on a video node.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The field current_norm does not have to be set for g_parm to be a valid
ioctl. Remove that check, but add a check whether this is a video node
instead as g_parm only makes sense for those nodes.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
If g_parm is handled automatically, then set readbuffers to 2, which is the
minimum number of buffers videobuf uses.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
v4l-dvb-git/drivers/media/video/vino.c: In function 'vino_acquire_input':
v4l-dvb-git/drivers/media/video/vino.c:2602:18: warning: 'data_norm' may be used uninitialized in this function [-Wuninitialized]
v4l-dvb-git/drivers/media/video/vino.c: In function 'vino_set_input':
v4l-dvb-git/drivers/media/video/vino.c:2690:19: warning: 'data_norm' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
v4l-dvb-git/drivers/media/dvb/frontends/cx24110.c: In function ‘cx24110_read_ucblocks’:
v4l-dvb-git/drivers/media/dvb/frontends/cx24110.c:520:40: warning: value computed is not used [-Wunused-value]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The webcam 0458:7025 (Eye911Q) has:
- an inverted power pin,
- a sensor mi0360b which cannot be probed.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
