summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-10-29net/mlx4_en: Resolve dividing by zero in 32-bit systemEugenia Emantayev1-1/+4
When doing roundup_pow_of_two for large enough number with bit 31, an overflow will occur and a value equal to 1 will be returned. In this case 1 will be subtracted from the return value and division by zero will be reached. Fixes: 31c128b66e5b ("net/mlx4_en: Choose time-stamping shift value according to HW frequency") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx4_core: Change the default value of enable_qosMoshe Lazer1-2/+2
Change the default status of quality of service back to disabled, as it hurts performance in some cases. Fixes: 38438f7c7e8c ("net/mlx4: Set enhanced QoS support by default when ...") Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx4_core: Avoid setting ports to auto when only one port type is supportedMaor Gottlieb1-1/+9
When only one port type is supported, it should be read only. We reject changing requests, even to the auto sense mode. Fixes: 27bf91d6a0d5 ("mlx4_core: Add link type autosensing") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW specJack Morgenstein1-1/+2
The resource type enum in the resource tracker was incorrect. RES_EQ was put in the position of RES_NPORT_ID (a FC resource). Since the remaining resources maintain their current values, and RES_EQ is not passed from slaves to the hypervisor in any FW command, this change affects only the hypervisor. Therefore, there is no backwards-compatibility issue. Fixes: 623ed84b1f95 ("mlx4_core: initial header-file changes for SRIOV support") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt contextThomas Falcon2-11/+25
Schedule these XPORT event tasks in the shared workqueue so that IRQs are not freed in an interrupt context when sub-CRQs are released. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net: mv643xx_eth: Fetch the phy connection type from DTJason Gunthorpe1-4/+19
The MAC is capable of RGMII mode and that is probably a more typical connection type than GMII today (eg it is used by Marvell Reference designs for several SOCs). Let DT users specify the standard phy-connection-type = "rgmii-id"; On a phy node. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29Revert "hv_netvsc: report vmbus name in ethtool"Stephen Hemminger1-4/+0
This reverts commit e3f74b841d48 ("hv_netvsc: report vmbus name in ethtool")' because of problem introduced by commit f9a56e5d6a0ba ("Drivers: hv: make VMBus bus ids persistent"). This changed the format of the vmbus name and this new format is too long to fit in the bus_info field of ethtool. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29cxgb4: Fix error handling in alloc_uld_rxqs().Ganesh Goudar1-22/+18
Fix to release resources properly in error handling path of alloc_uld_rxqs(), This patch also removes unwanted arguments and avoids calling the same function twice. Fixes: 94cdb8bb993a (cxgb4: Add support for dynamic allocation of resources for ULD Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29IB/mlx4: avoid a -Wmaybe-uninitialize warningArnd Bergmann1-2/+3
There is an old warning about mlx4_SW2HW_EQ_wrapper on x86: ethernet/mellanox/mlx4/resource_tracker.c: In function ‘mlx4_SW2HW_EQ_wrapper’: ethernet/mellanox/mlx4/resource_tracker.c:3071:10: error: ‘eq’ may be used uninitialized in this function [-Werror=maybe-uninitialized] The problem here is that gcc won't track the state of the variable across a spin_unlock. Moving the assignment out of the lock is safe here and avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5: Avoid passing dma address 0 to firmwareNoa Osherovich1-8/+18
Currently the firmware can't work with a page with dma address 0. Passing such an address to the firmware will cause the give_pages command to fail. To avoid this, in case we get a 0 dma address of a page from the dma engine, we avoid passing it to FW by remapping to get an address other than 0. Fixes: bf0bf77f6519 ('mlx5: Support communicating arbitrary host...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5: PCI error recovery health care simulationMohamad Haj Yahia3-9/+55
In case that the kernel PCI error handlers are not called, we will trigger our own recovery flow. The health work will give priority to the kernel pci error handlers to recover the PCI by waiting for a small period, if the pci error handlers are not triggered the manual recovery flow will be executed. We don't save pci state in case of manual recovery because it will ruin the pci configuration space and we will lose dma sync. Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5: Fix race between PCI error handlers and health workMohamad Haj Yahia2-5/+34
Currently there is a race between the health care work and the kernel pci error handlers because both of them detect the error, the first one to be called will do the error handling. There is a chance that health care will disable the pci after resuming pci slot. Also create a separate WQ because now we will have two types of health works, one for the error detection and one for the recovery. Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5: Clear health sick bit when starting health pollMohamad Haj Yahia1-0/+1
The health sick status should be cleared when we start the health poll. This is crucial for driver reload (unload + load) in order to behave right in case of health issue. Fixes: fd76ee4da55a ('net/mlx5_core: Fix internal error detection conditions') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5: Change the acl enable prototype to return statusMohamad Haj Yahia1-16/+34
The Ingress/Egress ACL enable function may fail and it should return status to its caller to avoid NULL pointer dereference. Fixes: f942380c1239 ('net/mlx5: E-Switch, Vport ingress/egress ACLs rules for spoofchk') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5e: Unregister netdev before detaching itMohamad Haj Yahia2-1/+2
Detaching the netdev before unregistering it cause some netdev cleanup ndos to fail because they check presence of the netdev, so we need to unregister the netdev first. Fixes: 26e59d8077a3 ('net/mlx5e: Implement mlx5e interface attach/detach callbacks') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5e: Choose best nearest LRO timeoutSaeed Mahameed2-3/+21
Instead of predicting the index of the wanted LRO timeout value from hardware capabilities, look for the nearest LRO timeout value. Fixes: 5c50368f3831 ('net/mlx5e: Light-weight netdev open/stop') Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5: Correctly initialize last use of flow countersPaul Blakey1-0/+1
Currently, last use timestamp is initialized to zero. This is not the expected value by higher layers such as when we do TC action offloading. To fix that, set it to the current time, e.g when the counter/rule is offloaded. This is the same behaviour of non-offloaded TC actions. Fixes: 43a335e055bb ('mlx5_core: Flow counters infrastructure') Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5: Fix autogroups groups num not decreasingPaul Blakey1-0/+3
Autogroups groups num is increased when creating a new flow group, but is never decreased. Now decreasing it when deleting a flow group. Fixes: f0d22d187473 ('net/mlx5_core: Introduce flow steering autogrouped flow table') Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5: Keep autogroups list orderedPaul Blakey1-3/+3
Finding a new autogroup range is done by going over a group list sorted by each group start index. The search is stopped after finding the first free range. Adding the newly created group to the list is wrongly added to the end of the list regardless of its start index as the parameter of where to insert it is ignored. This commit makes sure to use that unused parameter to insert it where requested. Fixes: f0d22d187473 ('net/mlx5_core: Introduce flow steering autogrouped flow table') Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx5: Always Query HCA caps after setting themDaniel Jurgens1-6/+6
Always query the HCA caps after setting them to update the capablities data structures. Not doing so results in incorrect capabilities being reported including max_dc, max_qp and several others. Fixes: 59211bd3b632 ("net/mlx5: Split the load/unload flow into hardware and software flows") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29{net, ib}/mlx5: Make cache line size determination at runtime.Daniel Jurgens3-7/+27
ARM 64B cache line systems have L1_CACHE_BYTES set to 128. cache_line_size() will return the correct size. Fixes: cf50b5efa2fe('net/mlx5_core/ib: New device capabilities handling.') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28mlxsw: spectrum_router: Compare only trees which are in use during tree getJiri Pirko1-1/+2
Only trees which are in use should be compared to requested prefix usage. Fixes: 53342023eed9 ("mlxsw: spectrum_router: Implement LPM trees management") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28mlxsw: spectrum_router: Save requested prefix bitlist when creating treeJiri Pirko1-0/+2
Currently, the prefix bitlist is not saved for LPM trees, causing the compare to always fail which causes the tree to be destroyed and created for every inserted and removed FIB entry. So fix this by saving the bitlist as it should have been done from the very beginning. Fixes: 53342023eed9 ("mlxsw: spectrum_router: Implement LPM trees management") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27net: bgmac: fix spelling mistake: "connecton" -> "connection"Colin Ian King1-1/+1
trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27kalmia: avoid potential uninitialized variable useArnd Bergmann1-1/+1
The kalmia_send_init_packet() returns zero or a negative return code, but gcc has no way of knowing that there cannot be a positive return code, so it determines that copying the ethernet address at the end of kalmia_bind() will access uninitialized data: drivers/net/usb/kalmia.c: In function ‘kalmia_bind’: arch/x86/include/asm/string_32.h:78:22: error: ‘*((void *)&ethernet_addr+4)’ may be used uninitialized in this function [-Werror=maybe-uninitialized] *((short *)to + 2) = *((short *)from + 2); ^ drivers/net/usb/kalmia.c:138:5: note: ‘*((void *)&ethernet_addr+4)’ was declared here This warning is harmless, but for consistency, we should make the check for the return code match what the driver does everywhere else and just progate it, which then gets rid of the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27macsec: Fix header length if SCI is added if explicitly disabledTobias Brunner1-8/+18
Even if sending SCIs is explicitly disabled, the code that creates the Security Tag might still decide to add it (e.g. if multiple RX SCs are defined on the MACsec interface). But because the header length so far only depended on the configuration option the SCI overwrote the original frame's contents (EtherType and e.g. the beginning of the IP header) and if encrypted did not visibly end up in the packet, while the SC flag in the TCI field of the Security Tag was still set, resulting in invalid MACsec frames. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27at803x: double check SGMII side autonegZefir Kurtisi1-0/+39
In SGMII mode, we observed an autonegotiation issue after power-down-up cycles where the copper side reports successful link establishment but the SGMII side's link is down. This happened in a setup where the at8031 is connected over SGMII to a eTSEC (fsl gianfar), but so far could not be reproduced with other Ethernet device / driver combinations. This commit adds a wrapper function for at8031 that in case of operating in SGMII mode double checks SGMII link state when generic aneg_done() succeeds. It prints a warning on failure but intentionally does not try to recover from this state. As a result, if you ever see a warning '803x_aneg_done: SGMII link is not ok' you will end up having an Ethernet link up but won't get any data through. This should not happen, if it does, please contact the module maintainer. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27Revert "at803x: fix suspend/resume for SGMII link"Zefir Kurtisi1-26/+0
This reverts commit 98267311fe3b334ae7c107fa0e2413adcf3ba735. Suspending the SGMII alongside the copper side made the at803x inaccessable while powered down, e.g. it can't be re-probed after suspend. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27netvsc: fix incorrect receive checksum offloadingStephen Hemminger1-8/+11
The Hyper-V netvsc driver was looking at the incorrect status bits in the checksum info. It was setting the receive checksum unnecessary flag based on the IP header checksum being correct. The checksum flag is skb is about TCP and UDP checksum status. Because of this bug, any packet received with bad TCP checksum would be passed up the stack and to the application causing data corruption. The problem is reproducible via netcat and netem. This had a side effect of not doing receive checksum offload on IPv6. The driver was also also always doing checksum offload independent of the checksum setting done via ethtool. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27rocker: fix error return code in rocker_world_check_init()Wei Yongjun1-1/+1
Fix to return error code -EINVAL from the error handling case instead of 0, as done elsewhere in this function. Fixes: e420114eef4a ("rocker: introduce worlds infrastructure") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24Merge branch 'for-upstream' of ↵David S. Miller2-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2016-10-21 Here are some more Bluetooth fixes for the 4.9 kernel: - Fix to btwilink driver probe function return value - Power management fix to hci_bcm - Fix to encoding name in scan response data Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24net: fec: Call swap_buffer() prior to IP header alignmentFabio Estevam1-3/+3
Commit 3ac72b7b63d5 ("net: fec: align IP header in hardware") breaks networking on mx28. There is an erratum on mx28 (ENGR121613 - ENET big endian mode not compatible with ARM little endian) that requires an additional byte-swap operation to workaround this problem. So call swap_buffer() prior to performing the IP header alignment to restore network functionality on mx28. Fixes: 3ac72b7b63d5 ("net: fec: align IP header in hardware") Reported-and-tested-by: Henri Roosen <henri.roosen@ginzinger.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24bnx2x: Use the correct divisor value for PHC clock readings.Sudarsana Reddy Kalluru1-1/+1
Time Sync (PTP) implementation uses the divisor/shift value for converting the clock ticks to nanoseconds. Driver currently defines shift value as 1, this results in the nanoseconds value to be calculated as half the actual value. Hence the user application fails to synchronize the device clock value with the PTP master device clock. Need to use the 'shift' value of 0. Signed-off-by: Sony.Chacko <Sony.Chacko@cavium.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23qede: Fix incorrrect usage of APIs for un-mapping DMA memoryManish Chopra2-6/+6
Driver uses incorrect APIs to unmap DMA memory which were mapped using dma_map_single(). This patch fixes it to use appropriate APIs for un-mapping DMA memory. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23qed: Zero-out the buffer paased to dcbx_query() APISudarsana Reddy Kalluru1-0/+2
qed_dcbx_query_params() implementation populate the values to input buffer based on the dcbx mode and, the current negotiated state/params, the caller of this API need to memset the buffer to zero. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23qede: Reconfigure rss indirection direction table when rss count is updatedSudarsana Reddy Kalluru1-0/+7
Rx indirection table entries are in the range [0, (rss_count - 1)]. If user reduces the rss count, the table entries may not be in the ccorrect range. Need to reconfigure the table with new rss_count as a basis. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23qed*: Reduce the memory footprint for Rx pathSudarsana Reddy Kalluru2-1/+2
With the current default values for Rx path i.e., 8 queues of 8Kb entries each with 4Kb size, interface will consume 256Mb for Rx. The default values causing the driver probe to fail when the system memory is low. Based on the perforamnce results, rx-ring count value of 1Kb gives the comparable performance with Rx coalesce timeout of 12 seconds. Updating the default values. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23qede: Loopback implementation should ignore the normal trafficSudarsana Reddy Kalluru3-35/+49
During the execution of loopback test, driver may receive the packets which are not originated by this test, loopback implementation need to skip those packets. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23qede: Do not allow RSS config for 100G devicesSudarsana Reddy Kalluru1-0/+6
RSS configuration is not supported for 100G adapters. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23qede: get_channels() need to populate max tx/rx coalesce valuesSudarsana Reddy Kalluru1-0/+2
Recent changes in kernel ethtool implementation requires the driver callback for get_channels() has to populate the values for max tx/rx coalesce fields. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22net: dsa: bcm_sf2: Do not rely on kexec_in_progressFlorian Fainelli1-2/+3
After discussing with Eric, it turns out that, while using kexec_in_progress is a nice optimization, which prevents us from always powering on the integrated PHY, let's just turn it on in the shutdown path. This removes a dependency on kexec_in_progress which, according to Eric should not be used by modules Fixes: 2399d6143f85 ("net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernelsFlorian Fainelli1-0/+14
For a kernel that is being kexec'd we re-enable the integrated GPHY in order for the subsequent MDIO bus scan to succeed and properly bind to the bcm7xxx PHY driver. If we did not do that, the GPHY would be shut down by the time the MDIO driver is probing the bus, and it would fail to read the correct PHY OUI and therefore bind to an appropriate PHY driver. Later on, this would cause DSA not to be able to successfully attach to the PHY, and the interface would not be created at all. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca2-2/+2
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20stmmac: display the descriptors if DES0 = 0Giuseppe CAVALLARO1-4/+3
It makes sense to display the descriptors even if DES0 is zero. This helps for example in case of it is needed to dump rx write-back descriptors to get timestamp status. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: pci: Fix reset wait for SwitchX2Jiri Pirko1-2/+8
SwitchX2 firmware does not implement reset done yet. Moreover, when busy-polled for ready magic, that slows down firmware and reset takes longer than the defined timeout, causing initialization to fail. So restore the previous behaviour and just sleep in this case. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: switchx2: Fix ethernet port initializationElad Raz1-0/+1
When creating an ethernet port fails, we must move the port to disable, otherwise putting the port in switch partition 0 (ETH) or 1 (IB) will always fails. Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: spectrum_router: Make mlxsw_sp_router_fib4_del return void and remove ↵Jiri Pirko1-8/+5
warn The function return value is not checked anywhere. Also, the warning causes huge slowdown when removing large number of FIB entries which were not offloaded, because of ordering issue. Ido's preparing a patchset to fix the ordering issue, but that is definitelly not net tree material. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: spectrum_router: Use correct tree index for bindingJiri Pirko1-1/+2
By a mistake, there is tree index 0 passed to RALTB. Should be MLXSW_SP_LPM_TREE_MIN. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Reported-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20Bluetooth: btwilink: Fix probe return valueJacob Siverskog1-1/+1
Probe functions should return 0 on success. This driver's probe returns the value returned by hci_register_dev(), which is the hci index. This works for systems with only one hci device (id = 0) but for systems where the btwilink device ends up with an id larger than 0, things will start to fall apart. Make the probe function return 0 on success. Signed-off-by: Jacob Siverskog <jacob@teenage.engineering> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-19stmmac: fix and review the ptp registration.Giuseppe CAVALLARO3-14/+9
The commit commit 7086605a6ab5 ("stmmac: fix error check when init ptp") breaks the procedure added by the commit efee95f42b5d ("ptp_clock: future-proofing drivers against PTP subsystem becoming optional") So this patch tries to re-import the logic added by the latest commit above: it makes sense to have the stmmac_ptp_register as void function and, inside the main, the stmmac_init_ptp can fails in case of the capability cannot be supported by the HW. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Nicolas Pitre <nico@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-05 01:57:53 +0300