summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2007-10-17lp_console: cleanupsPavel Machek1-9/+8
Remove NULL initializers and clean whitespace a bit. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17HVC console is also used by iSeries, so add that to HVC_DRIVER help.Rusty Russell1-1/+1
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Delay creation of khcvd threadRusty Russell2-18/+42
This changes hvc_init() to be called only when someone actually uses the hvc_console driver. Dave Jones complained when profiling bootup. hvc_console used to only be for Power aka pSeries: now lguest and Xen both want it built-in in case the kernel is a guest under one of those, even though usually it will be a native boot. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17tty: expose new methods needed for drivers to get termios rightAlan Cox1-10/+72
This adds three new functions (or in one case to be more exact makes it always available) tty_termios_copy_hw Copies all the hardware settings from one termios structure to the other. This is intended for drivers that support little or no hardware setting tty_termios_encode_baud_rate Allows you to set the input and output baud rate in a termios structure. A driver is supposed to set the resulting baud rate from a request so most will want to use this function to set the resulting input and output rates to match the hardware values. Internally it knows about keeping Bxxx encoding when possible to maximise compatibility. tty_encode_baud_rate As above but for the tty's own current termios structure I suspect this will initially need some tweaking as it gets enabled by driver patches over the next few mm cycles so consider this lot -mm only for the moment so it can stabilize and end up neat before it goes to base. I've tried not to break any obscure architectures - if you get a speed you can't represent the code will print warnings on non updated termios systems but not break. Once this is merged and seems sane I've got a growing pile of driver updates to use it - notably for USB serial drivers. [akpm@linux-foundation.org: cleanups] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lk201: remove obsolete driverMaciej W. Rozycki7-1373/+0
Remove the old-fashioned lk201 driver under drivers/tc/ that used to be used by the old dz.c and zs.c drivers, which is now orphan code referred to from nowhere and does not build anymore. A modern replacement is available as drivers/input/keyboard/lkkbd.c. There are no plans to do anything about this piece of code and it does not fit anywhere anymore, so it is not just a matter of maintenance or the lack of. There are still some bits that might be added to the new lkkbd.c driver based on the old code, and the embedded hardware documentation which is otherwise quite hard to get hold of might be useful to keep too. Both of these can be done separately though. RIP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Make the pr_*() family of macros in kernel.h completeEmil Medve4-17/+8
Other/Some pr_*() macros are already defined in kernel.h, but pr_err() was defined multiple times in several other places Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Tony Lindgren <tony@atomide.com> Reviewed-by: Satyam Sharma <satyam@infradead.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17I2O: Fix "defined but not used" build warningsSatyam Sharma1-47/+47
drivers/message/i2o/exec-osm.c:539: warning: `i2o_exec_lct_notify' defined but not used comes when CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=n, because its only callsite is #ifdef'ed as such. So let's #ifdef the function definition also. Also move the definition to before the callsite, to get rid of forward prototype. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17add CONFIG_VT_UNICODEBill Nottingham5-5/+26
As of now, the kernel defaults to non-unicode and XLATE for the keyboard. We've been changing this in Fedora, but that requires patching the defaults in the kernel. The attached introduces CONFIG_VT_UNICODE, which sets the console in unicode mode by default on boot, including both the virtual terminal and the keyboard driver. Signed-off-by: Bill Nottingham <notting@redhat.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17make dmapool code use __set_current_state()Arjan van de Ven1-1/+1
Signed-off-by: Arjan van de Ven <arjan@Linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Remove final traces of long-deprecated "ramdisk" kernel parmRobert P. J. Day1-6/+1
Since the "ramdisk" kernel parameter has been officially deprecated since at least 2.6.18, might as well finally get rid of it. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17drivers/block/cciss.c: fix check-after-useAdrian Bunk1-29/+27
The Coverity checker spotted that we have already oops'ed if "disk" was NULL. Since "disk" being NULL seems impossible at this point this patch removes the NULL check. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17n_hdlc.c: fix check-after-useAdrian Bunk1-1/+1
The Coverity checker spotted that we'd have already oops'ed if "tty" was NULL. Since "tty" can't be NULL when we reach this line of code this patch removes the NULL check. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17cciss: fix error reporting for SG_IOSteve Cameron1-18/+61
This fixes a problem with the way cciss was filling out the "errors" field of the request structure upon completion of requests. Previously, it just put a 1 or a 0 in there and used the negation of this as the uptodate parameter to one of the functions in the block layer, being a block device. For the SG_IO ioctl, this was not sufficient, and we noticed that, for example, sg_turs from sg3_utils did not correctly detect problems due to cciss having set rq->errors incorrectly. Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17NBD: allow hung network I/O to be cancelledPaul Clements1-31/+62
Allow NBD I/O to be cancelled when a network outage occurs. Previously, I/O would just hang, and if enough I/O was hung in nbd, the system (at least user-level) would completely hang until a TCP timeout (default, 15 minutes) occurred. The patch introduces a new ioctl NBD_SET_TIMEOUT that allows a transmit timeout value (in seconds) to be specified. Any network send that exceeds the timeout will be cancelled and the nbd connection will be shut down. I've tested with various timeout values and 6 seconds seems to be a good choice for the timeout. If the NBD_SET_TIMEOUT ioctl is not called, you get the old (I/O hang) behavior. Signed-off-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17NBD: set uninitialized devices to size 0Paul Clements1-2/+5
This fixes errors with utilities (such as LVM's vgscan) that try to scan all devices. Previously this would generate read errors when uninitialized nbd devices were scanned: # vgscan Reading all physical volumes. This may take a while... /dev/nbd0: read failed after 0 of 1024 at 0: Input/output error /dev/nbd0: read failed after 0 of 1024 at 509804544: Input/output error /dev/nbd0: read failed after 0 of 2048 at 0: Input/output error /dev/nbd1: read failed after 0 of 1024 at 509804544: Input/output error /dev/nbd1: read failed after 0 of 2048 at 0: Input/output error From now on, uninitialized nbd devices will have size zero, which prevents these errors. Signed-off-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17floppy: tolerate DMA channel unavailabilityJan Beulich1-5/+9
The floppy driver is already written to be able to operate in virtual DMA mode. Thus it can easily be adjusted to tolerate failure from fd_request_dma() as long as virtual DMA mode is not disallowed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17jsm: Remove further unneeded crudAlan Cox1-40/+3
Remove some remaining vestiges of the old hacks jsm had to work around the old tty buffering. With the new tty buffering it simply doesn't matter any more. [michal.k.k.piotrowski@gmail.com: fix warning] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Scott Kilau <scottk@digi.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17mxser: Remove use of dead TTY_FLIPBUF_SIZE definitionAlan Cox1-2/+1
We simply define it to the same value. Nowdays the TTY flip value is irrelevant but the value it used is as good as any so why risk breaking it Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17unicode diacritics supportSamuel Thibault9-35/+146
There have been issues with non-latin1 diacritics and unicode. http://bugzilla.kernel.org/show_bug.cgi?id=7746 Git 759448f459234bfcf34b82471f0dba77a9aca498 `Kernel utf-8 handling' partly resolved it by adding conversion between diacritics and unicode. The patch below goes further by just turning diacritics into unicode, hence providing better future support. The kbd support can be fetched from http://bugzilla.kernel.org/attachment.cgi?id=12313 This was tested in all of latin1, latin9, latin2 and unicode with french and czech dead keys. Turn the kernel accent_table into unicode, and extend ioctls KDGKBDIACR and KDSKBDIACR into their equivalents KDGKBDIACRUC and KDSKBDIACR. New function int conv_uni_to_8bit(u32 uni) for converting unicode into 8bit _input_. No, we don't want to store the translation, as it is potentially sparse and large. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Jan Engelhardt <jengelh@gmx.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17aoe: remove unecessary wrapper functionEd L. Cashin3-17/+8
We can just use skb_mac_header now, and we don't need a wrapper function to perform the cast. Instead of requiring the reader to check aoe.h to look up what an aoe_hdr function does, I'd rather do without it. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17pnp: avoid a small unlikely memory leak in proc_read_escd()Jesper Juhl1-2/+3
There's a small and unlikely memory leak in drivers/pnp/pnpbios/proc.c::proc_read_escd(). It's inside a sanity check, so it probably won't trigger often (if at all), however it *is* a potential leak and it's easy to avoid, so let's just fix it :) Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Tweak /proc/ipmi removalAlexey Dobriyan1-1/+1
Driver does proc_mkdir("ipmi", NULL); but remove_proc_entry(proc_ipmi_root->name, &proc_root); This is OK and working if only slightly inconsistent. Also changing proc_root to NULL will help OpenVZ which has multiple proc roots and, as we now know, requires matching parents in such cases. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17tpm: pay attention to IRQ info from PNPBjorn Helgaas1-9/+13
If we discover the TIS TPM device via PNP, use the PNP IRQ information rather than probing for an IRQ. If PNP shows no IRQ, run the TPM in polling mode. Tested-by: <valdis.kletnieks@vt.edu> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17drivers/char/ip2/ip2main.c: kmalloc + memset conversion to kzallocMariusz Kozlowski1-3/+2
drivers/char/ip2/ip2main.c | 104398 -> 104346 (-52 bytes) drivers/char/ip2/ip2main.o | 210710 -> 210702 (-8 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17drivers/char/consolemap.c: kmalloc + memset conversion to kzallocMariusz Kozlowski1-2/+1
drivers/char/consolemap.c | 22678 -> 22650 (-28 bytes) drivers/char/consolemap.o | 90113 -> 90029 (-84 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17epca.c: reformat comments and coding style improvementsAlexey Dobriyan1-1409/+1202
* Remove stupid comments, like, at the beginning of every function that function begins (twice per function) and at the end (once) * Remove trailing or otherwise broken whitespace as per let c_space_errors=1 * Reformat comments to fit it into 80 columns and remove stupid ------------'s. * Indent case labels on the same column where switch begins * other minor CS tweaks not worth mentioning Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Remove "unsafe" from module structRusty Russell1-5/+4
Adrian Bunk points out that "unsafe" was used to mark modules touched by the deprecated MOD_INC_USE_COUNT interface, which has long gone. It's time to remove the member from the module structure, as well. If you want a module which can't unload, don't register an exit function. (Vlad Yasevich says SCTP is now safe to unload, so just remove the __unsafe there). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17convert ill defined log2() to ilog2()Fengguang Wu3-14/+7
It's *wrong* to have #define log2(n) ffz(~(n)) It should be *reversed*: #define log2(n) flz(~(n)) or #define log2(n) fls(n) or just use ilog2(n) defined in linux/log2.h. This patch follows the last solution, recommended by Andrew Morton. Cc: <linux-ext4@vger.kernel.org> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Chris Ahna <christopher.j.ahna@intel.com> Cc: David Mosberger-Tang <davidm@hpl.hp.com> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Clean up duplicate includes in drivers/w1/Jesper Juhl1-1/+0
This patch cleans up duplicate includes in drivers/w1/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Clean up duplicate includes in drivers/char/Jesper Juhl3-6/+0
This patch cleans up duplicate includes in drivers/char/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17pcmcia: CompactFlash driver for PA Semi Electra boardsOlof Johansson3-0/+385
Driver for the CompactFlash slot on the PA Semi Electra eval board. It's a simple device sitting on localbus, with interrupts and detect/voltage control over GPIO. The driver is implemented as an of_platform driver, and adds localbus as a bus being probed by the of_platform framework. [akpm@linux-foundation.org: cleanups] [olof@lixom.net: fix build] Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@infradead.org> Cc: Milton Miller <miltonm@bga.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Remove unneeded lock_kernel() in driver/block/loop.cDiego Woitasen1-2/+0
Signed-off-by: Diego Woitasen <diego@woitasen.com.ar> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17nbd: change a parameter's type to remove a memcpy callDenis Cheng1-5/+3
This memcpy looks so strange, in fact it's merely a pointer dereference, so I change the parameter's type to refer it more directly, this could make the memcpy not needed anymore. In the function nbd_read_stat where nbd_find_request is only once called, the parameter served should be transformed accordingly. Signed-off-by: Denis Cheng <crquan@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17nbd: use list_for_each_entry_safe to make it more consolidated and readableDenis Cheng1-4/+2
Thus the traverse of the loop may delete nodes, use the safe version. Signed-off-by: Denis Cheng <crquan@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17kill DECLARE_MUTEX_LOCKEDChristoph Hellwig1-1/+3
DECLARE_MUTEX_LOCKED was used for semaphores used as completions and we've got rid of them. Well, except for one in libusual that the maintainer explicitly wants to keep as semaphore. So convert that useage to an explicit sema_init and kill of DECLARE_MUTEX_LOCKED so that new code is reminded to use a completion. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: "Satyam Sharma" <satyam.sharma@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Driver for the Atmel on-chip SSC on AT32AP and AT91Hans-Christian Egtvedt3-0/+187
The Synchronous Serial Controller (SSC) on Atmel microprocessors are capable of tranceiving many frame based protocols, like I2S. Tested on the AT32AP7000/ATSTK1000. This driver is used in the ALSA sound driver for the AT73C213 external DAC on the ATSTK1000 development board for AVR32. This sound driver will be submitted soon. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 [akpm@linux-foundation.org: init spinlock at compile time] Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17oom: move prototypes to appropriate header fileDavid Rientjes1-0/+1
Move the OOM killer's extern function prototypes to include/linux/oom.h and include it where necessary. [clg@fr.ibm.com: build fix] Cc: Andrea Arcangeli <andrea@suse.de> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter2-4/+3
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17mm: bdi init hooksPeter Zijlstra2-1/+24
provide BDI constructor/destructor hooks [akpm@linux-foundation.org: compile fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Merge branch 'upstream-linus' of ↵Linus Torvalds12-216/+558
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: WOL bugfix for 3c59x.c skge 1.12 skge: add a debug interface skge: eeprom support skge: internal stats skge: XM PHY handling fixes skge: changing MTU while running causes problems skge: fix ram buffer size calculation gianfar: Fix compile regression caused by 09f75cd7 net: Fix new EMAC driver for NAPI changes bonding: two small fixes for IPoIB support e1000e: don't poke PHY registers to retreive link status e1000e: fix error checks e1000e: Fix debug printk macro tokenring/3c359.c: fixed array index problem [netdrvr] forcedeth: remove in-driver copy of net_device_stats [netdrvr] forcedeth: improved probe info; dev_printk() cleanups forcedeth: fix NAPI rx poll function
2007-10-17missing include in mmcAl Viro1-0/+1
AFAICS, fallout from repacing include of blkdev.h with include of bio.h. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fix adbhid mismergeAl Viro1-1/+1
This fixes a lost 'key' variable declaration that went missing in a mismerge (commit b981d8b3f5e008ff10d993be633ad00564fc22cd) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17WOL bugfix for 3c59x.cSteffen Klassert1-1/+7
Some NICs (3c905B) can not generate PME in power state PCI_D0, while others like 3c905C can. Call pci_enable_wake() with PCI_D3hot should give proper WOL for 3c905B. Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Tested-by: Harry Coin <hcoin@n4comm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-17skge 1.12Stephen Hemminger1-1/+1
version update Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-17skge: add a debug interfaceStephen Hemminger3-0/+156
Add a debugfs interface to look at internal ring state. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-17skge: eeprom supportStephen Hemminger2-2/+102
Add ability to read/write EEPROM Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-17skge: internal statsStephen Hemminger2-30/+24
Use internal stats structure Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-17skge: XM PHY handling fixesStephen Hemminger2-44/+50
Change how PHY is managed on SysKonnect fibre based boards. Poll for PHY coming up 1 per second, but use interrupt to detect loss. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-17skge: changing MTU while running causes problemsStephen Hemminger1-7/+44
Rather than bring network down/up when changing MTU, only need to impact receiver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-17skge: fix ram buffer size calculationStephen Hemminger1-27/+24
This fixes problems with transmit hangs on older fiber based SysKonnect boards. Adjust ram buffer sizing calculation to make it correct on all boards and make it like the code in sky2 driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 19:59:51 +0300