summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-10-29hv_netvsc: Fix race between VF offering and VF association message from hostGaurav Kohli3-0/+27
commit 365e1ececb2905f94cc10a5817c5b644a32a3ae2 upstream. During vm boot, there might be possibility that vf registration call comes before the vf association from host to vm. And this might break netvsc vf path, To prevent the same block vf registration until vf bind message comes from host. Cc: stable@vger.kernel.org Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number") Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29ACPI: video: Force backlight native for more TongFang devicesWerner Sembach1-0/+64
commit 3dbc80a3e4c55c4a5b89ef207bed7b7de36157b4 upstream. This commit is very different from the upstream commit! It fixes the same issue by adding more quirks, rather then the general fix from the 6.1 kernel, because the general fix from the 6.1 kernel is part of a larger refactoring of the backlight code which is not suitable for the stable series. As described in "ACPI: video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks" (10212754a0d2) the upstream commit "ACPI: video: Make backlight class device registration a separate step (v2)" (3dbc80a3e4c5) makes these quirks unnecessary. However as mentioned in this bugtracker ticket https://bugzilla.kernel.org/show_bug.cgi?id=215683#c17 the upstream fix is part of a larger patchset that is overall too complex for stable. The TongFang GKxNRxx, GMxNGxx, GMxZGxx, and GMxRGxx / TUXEDO Stellaris/Polaris Gen 1-4, have the same problem as the Clevo NL5xRU and NL5xNU / TUXEDO Aura 15 Gen1 and Gen2: They have a working native and video interface for screen backlight. However the default detection mechanism first registers the video interface before unregistering it again and switching to the native interface during boot. This results in a dangling SBIOS request for backlight change for some reason, causing the backlight to switch to ~2% once per boot on the first power cord connect or disconnect event. Setting the native interface explicitly circumvents this buggy behaviour by avoiding the unregistering process. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29arm64: topology: move store_cpu_topology() to shared codeConor Dooley1-0/+19
commit 456797da792fa7cbf6698febf275fe9b36691f78 upstream. arm64's method of defining a default cpu topology requires only minimal changes to apply to RISC-V also. The current arm64 implementation exits early in a uniprocessor configuration by reading MPIDR & claiming that uniprocessor can rely on the default values. This is appears to be a hangover from prior to '3102bc0e6ac7 ("arm64: topology: Stop using MPIDR for topology information")', because the current code just assigns default values for multiprocessor systems. With the MPIDR references removed, store_cpu_topolgy() can be moved to the common arch_topology code. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29iommu/vt-d: Clean up si_domain in the init_dmars() error pathJerry Snitselaar1-0/+5
[ Upstream commit 620bf9f981365c18cc2766c53d92bf8131c63f32 ] A splat from kmem_cache_destroy() was seen with a kernel prior to commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool") when there was a failure in init_dmars(), because the iommu_domain cache still had objects. While the mempool code is now gone, there still is a leak of the si_domain memory if init_dmars() fails. So clean up si_domain in the init_dmars() error path. Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Fixes: 86080ccc223a ("iommu/vt-d: Allocate si_domain in init_dmars()") Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20221010144842.308890-1-jsnitsel@redhat.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: hns: fix possible memory leak in hnae_ae_register()Yang Yingliang1-1/+3
[ Upstream commit ff2f5ec5d009844ec28f171123f9e58750cef4bf ] Inject fault while probing module, if device_register() fails, but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). unreferenced object 0xffff00c01aba2100 (size 128): comm "systemd-udevd", pid 1259, jiffies 4294903284 (age 294.152s) hex dump (first 32 bytes): 68 6e 61 65 30 00 00 00 18 21 ba 1a c0 00 ff ff hnae0....!...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000034783f26>] slab_post_alloc_hook+0xa0/0x3e0 [<00000000748188f2>] __kmem_cache_alloc_node+0x164/0x2b0 [<00000000ab0743e8>] __kmalloc_node_track_caller+0x6c/0x390 [<000000006c0ffb13>] kvasprintf+0x8c/0x118 [<00000000fa27bfe1>] kvasprintf_const+0x60/0xc8 [<0000000083e10ed7>] kobject_set_name_vargs+0x3c/0xc0 [<000000000b87affc>] dev_set_name+0x7c/0xa0 [<000000003fd8fe26>] hnae_ae_register+0xcc/0x190 [hnae] [<00000000fe97edc9>] hns_dsaf_ae_init+0x9c/0x108 [hns_dsaf] [<00000000c36ff1eb>] hns_dsaf_probe+0x548/0x748 [hns_dsaf] Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221018122451.1749171-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: phy: dp83867: Extend RX strap quirk for SGMII modeHarini Katakam1-0/+8
[ Upstream commit 0c9efbd5c50c64ead434960a404c9c9a097b0403 ] When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4 register should be set. The former is already handled in dp83867_config_init; add the latter in SGMII specific initialization. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Harini Katakam <harini.katakam@amd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29HID: magicmouse: Do not set BTN_MOUSE on double reportJosé Expósito1-1/+1
[ Upstream commit bb5f0c855dcfc893ae5ed90e4c646bde9e4498bf ] Under certain conditions the Magic Trackpad can group 2 reports in a single packet. The packet is split and the raw event function is invoked recursively for each part. However, after processing each part, the BTN_MOUSE status is updated, sending multiple click events. [1] Return after processing double reports to avoid this issue. Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/811 # [1] Fixes: a462230e16ac ("HID: magicmouse: enable Magic Trackpad support") Reported-by: Nulo <git@nulo.in> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20221009182747.90730-1-jose.exposito89@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29ACPI: extlog: Handle multiple recordsTony Luck1-13/+20
[ Upstream commit f6ec01da40e4139b41179f046044ee7c4f6370dc ] If there is no user space consumer of extlog_mem trace records, then Linux properly handles multiple error records in an ELOG block extlog_print() print_extlog_rcd() __print_extlog_rcd() cper_estatus_print() apei_estatus_for_each_section() But the other code path hard codes looking for a single record to output a trace record. Fix by using the same apei_estatus_for_each_section() iterator to step over all records. Fixes: 2dfb7d51a61d ("trace, RAS: Add eMCA trace event interface") Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29r8152: add PID for the Lenovo OneLink+ DockJean-Francois Le Fillatre2-0/+8
commit 1bd3a383075c64d638e65d263c9267b08ee7733c upstream. The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as a broken CDC device by default. Add the custom Lenovo PID to the r8152 driver to support it properly. Also, systems compatible with this dock provide a BIOS option to enable MAC address passthrough (as per Lenovo document "ThinkPad Docking Solutions 2017"). Add the custom PID to the MAC passthrough list too. Tested on a ThinkPad 13 1st gen with the expected results: passthrough disabled: Invalid header when reading pass-thru MAC addr passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29media: venus: dec: Handle the case where find_format failsBryan O'Donoghue1-0/+2
commit 06a2da340f762addc5935bf851d95b14d4692db2 upstream. Debugging the decoder on msm8916 I noticed the vdec probe was crashing if the fmt pointer was NULL. A similar fix from Colin Ian King found by Coverity was implemented for the encoder. Implement the same fix on the decoder. Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTSKai-Heng Feng1-1/+1
commit 1e41e693f458eef2d5728207dbd327cd3b16580a upstream. UBSAN complains about array-index-out-of-bounds: [ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41 [ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]' [ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu [ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010 [ 1.980718] kernel: Call Trace: [ 1.980721] kernel: <TASK> [ 1.980723] kernel: show_stack+0x52/0x58 [ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f [ 1.980734] kernel: dump_stack+0x10/0x12 [ 1.980736] kernel: ubsan_epilogue+0x9/0x45 [ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci] [ 1.980748] kernel: ata_qc_issue+0x135/0x240 [ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580 [ 1.980754] kernel: ? vprintk_default+0x1d/0x20 [ 1.980759] kernel: ata_exec_internal+0x67/0xa0 [ 1.980762] kernel: sata_pmp_read+0x8d/0xc0 [ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90 [ 1.980768] kernel: sata_pmp_attach+0x8b/0x310 [ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0 [ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30 [ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci] [ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci] [ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci] [ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0 [ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560 [ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40 [ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci] [ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600 [ 1.980810] kernel: ata_scsi_error+0x9c/0xd0 [ 1.980813] kernel: scsi_error_handler+0xa1/0x180 [ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0 [ 1.980820] kernel: kthread+0x12a/0x150 [ 1.980823] kernel: ? set_kthread_struct+0x50/0x50 [ 1.980826] kernel: ret_from_fork+0x22/0x30 [ 1.980831] kernel: </TASK> This happens because sata_pmp_init_links() initialize link->pmp up to SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array. I can't find the maximum Enclosure Management ports specified in AHCI spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier Information" can utilize 4 bits, which implies it can support up to 16 ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the issue. BugLink: https://bugs.launchpad.net/bugs/1970074 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29ata: ahci-imx: Fix MODULE_ALIASAlexander Stein1-1/+1
commit 979556f1521a835a059de3b117b9c6c6642c7d58 upstream. 'ahci:' is an invalid prefix, preventing the module from autoloading. Fix this by using the 'platform:' prefix and DRV_NAME. Fixes: 9e54eae23bc9 ("ahci_imx: add ahci sata support on imx platforms") Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29hwmon/coretemp: Handle large core ID valueZhang Rui1-15/+41
commit 7108b80a542b9d65e44b36d64a700a83658c0b73 upstream. The coretemp driver supports up to a hard-coded limit of 128 cores. Today, the driver can not support a core with an ID above that limit. Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they may be sparse and they may be large. Update the driver to map arbitrary core ID numbers into appropriate array indexes so that 128 cores can be supported, no matter the encoding of core ID's. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Len Brown <len.brown@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221014090147.1836-3-rui.zhang@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26thermal: intel_powerclamp: Use first online CPU as control_cpuRafael J. Wysocki1-5/+1
commit 4bb7f6c2781e46fc5bd00475a66df2ea30ef330d upstream. Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash") fixed an issue related to using smp_processor_id() in preemptible context by replacing it with a pair of get_cpu()/put_cpu(), but what is needed there really is any online CPU and not necessarily the one currently running the code. Arguably, getting the one that's running the code in there is confusing. For this reason, simply give the control CPU role to the first online one which automatically will be CPU0 if it is online, so one check can be dropped from the code for an added benefit. Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/ Fixes: 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26efi: libstub: drop pointless get_memory_map() callArd Biesheuvel1-8/+0
commit d80ca810f096ff66f451e7a3ed2f0cd9ef1ff519 upstream. Currently, the non-x86 stub code calls get_memory_map() redundantly, given that the data it returns is never used anywhere. So drop the call. Cc: <stable@vger.kernel.org> # v4.14+ Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26md: Replace snprintf with scnprintfSaurabh Sengar1-2/+2
commit 1727fd5015d8f93474148f94e34cda5aa6ad4a43 upstream. Current code produces a warning as shown below when total characters in the constituent block device names plus the slashes exceeds 200. snprintf() returns the number of characters generated from the given input, which could cause the expression “200 – len” to wrap around to a large positive number. Fix this by using scnprintf() instead, which returns the actual number of characters written into the buffer. [ 1513.267938] ------------[ cut here ]------------ [ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprintf+0x2c8/0x510 [ 1513.267944] Modules linked in: <snip> [ 1513.267969] CPU: 15 PID: 37247 Comm: mdadm Not tainted 5.4.0-1085-azure #90~18.04.1-Ubuntu [ 1513.267969] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 1513.267971] RIP: 0010:vsnprintf+0x2c8/0x510 <-snip-> [ 1513.267982] Call Trace: [ 1513.267986] snprintf+0x45/0x70 [ 1513.267990] ? disk_name+0x71/0xa0 [ 1513.267993] dump_zones+0x114/0x240 [raid0] [ 1513.267996] ? _cond_resched+0x19/0x40 [ 1513.267998] raid0_run+0x19e/0x270 [raid0] [ 1513.268000] md_run+0x5e0/0xc50 [ 1513.268003] ? security_capable+0x3f/0x60 [ 1513.268005] do_md_run+0x19/0x110 [ 1513.268006] md_ioctl+0x195e/0x1f90 [ 1513.268007] blkdev_ioctl+0x91f/0x9f0 [ 1513.268010] block_ioctl+0x3d/0x50 [ 1513.268012] do_vfs_ioctl+0xa9/0x640 [ 1513.268014] ? __fput+0x162/0x260 [ 1513.268016] ksys_ioctl+0x75/0x80 [ 1513.268017] __x64_sys_ioctl+0x1a/0x20 [ 1513.268019] do_syscall_64+0x5e/0x200 [ 1513.268021] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 766038846e875 ("md/raid0: replace printk() with pr_*()") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26clk: bcm2835: Make peripheral PLLC criticalMaxime Ripard1-1/+1
[ Upstream commit 6c5422851d8be8c7451e968fd2e6da41b6109e17 ] When testing for a series affecting the VEC, it was discovered that turning off and on the VEC clock is crashing the system. It turns out that, when disabling the VEC clock, it's the only child of the PLLC-per clock which will also get disabled. The source of the crash is PLLC-per being disabled. It's likely that some other device might not take a clock reference that it actually needs, but it's unclear which at this point. Let's make PLLC-per critical so that we don't have that crash. Reported-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220926084509.12233-1-maxime@cerno.tech Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26usb: idmouse: fix an uninit-value in idmouse_openDongliang Mu1-4/+4
[ Upstream commit bce2b0539933e485d22d6f6f076c0fcd6f185c4c ] In idmouse_create_image, if any ftip_command fails, it will go to the reset label. However, this leads to the data in bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check for valid image incurs an uninitialized dereference. Fix this by moving the check before reset label since this check only be valid if the data after bulk_in_buffer[HEADER] has concrete data. Note that this is found by KMSAN, so only kernel compilation is tested. Reported-by: syzbot+79832d33eb89fb3cd092@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20220922134847.1101921-1-dzm91@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26nvmet-tcp: add bounds check on Transfer TagVarun Prakash1-2/+9
[ Upstream commit b6a545ffa2c192b1e6da4a7924edac5ba9f4ea2b ] ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(), add a bounds check to avoid out-of-bounds access. Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26nvme: copy firmware_rev on each initKeith Busch1-1/+2
[ Upstream commit a8eb6c1ba48bddea82e8d74cbe6e119f006be97d ] The firmware revision can change on after a reset so copy the most recent info each time instead of just the first time, otherwise the sysfs firmware_rev entry may contain stale data. Reported-by: Jeff Lien <jeff.lien@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv()Xiaoke Wang1-10/+6
[ Upstream commit 708056fba733a73d926772ea4ce9a42d240345da ] In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated in failure, then `pcmdpriv->cmd_allocated_buf` will be not properly released. Besides, considering there are only two error paths and the first one can directly return, so we do not need implicitly jump to the `exit` tag to execute the error handler. So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error path to release the resource and simplified the return logic of rtw_init_cmd_priv(). As there is no proper device to test with, no runtime testing was performed. Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Link: https://lore.kernel.org/r/tencent_2B7931B79BA38E22205C5A09EFDF11E48805@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26Revert "usb: storage: Add quirk for Samsung Fit flash"sunghwan jung1-6/+0
[ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ] This reverts commit 86d92f5465958752481269348d474414dccb1552, which fix the timeout issue for "Samsung Fit Flash". But the commit affects not only "Samsung Fit Flash" but also other usb storages that use the same controller and causes severe performance regression. # hdparm -t /dev/sda (without the quirk) Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec # hdparm -t /dev/sda (with the quirk) Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec The commit author mentioned that "Issue was reproduced after device has bad block", so this quirk should be applied when we have the timeout issue with a device that has bad blocks. We revert the commit so that we apply this quirk by adding kernel paramters using a bootloader or other ways when we really need it, without the performance regression with devices that don't have the issue. Signed-off-by: sunghwan jung <onenowy@gmail.com> Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26usb: musb: Fix musb_gadget.c rxstate overflow bugRobin Guo1-0/+3
[ Upstream commit eea4c860c3b366369eff0489d94ee4f0571d467d ] The usb function device call musb_gadget_queue() adds the passed request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz) and (is_buffer_mapped(req) return false),the rxstate() will copy all data in fifo to request->buf which may cause request->buf out of bounds. Fix it by add the length check : fifocnt = min_t(unsigned, request->length - request->actual, fifocnt); Signed-off-by: Robin Guo <guoweibin@inspur.com> Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()Jianglei Nie1-1/+6
[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ] xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5dLogan Gunthorpe1-0/+12
[ Upstream commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74 ] A complicated deadlock exists when using the journal and an elevated group_thrtead_cnt. It was found with loop devices, but its not clear whether it can be seen with real disks. The deadlock can occur simply by writing data with an fio script. When the deadlock occurs, multiple threads will hang in different ways: 1) The group threads will hang in the blk-wbt code with bios waiting to be submitted to the block layer: io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 __submit_bio+0xe6/0x100 submit_bio_noacct_nocheck+0x42e/0x470 submit_bio_noacct+0x4c2/0xbb0 ops_run_io+0x46b/0x1a30 handle_stripe+0xcd3/0x36b0 handle_active_stripes.constprop.0+0x6f6/0xa60 raid5_do_work+0x177/0x330 Or: io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 __submit_bio+0xe6/0x100 submit_bio_noacct_nocheck+0x42e/0x470 submit_bio_noacct+0x4c2/0xbb0 flush_deferred_bios+0x136/0x170 raid5_do_work+0x262/0x330 2) The r5l_reclaim thread will hang in the same way, submitting a bio to the block layer: io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 __submit_bio+0xe6/0x100 submit_bio_noacct_nocheck+0x42e/0x470 submit_bio_noacct+0x4c2/0xbb0 submit_bio+0x3f/0xf0 md_super_write+0x12f/0x1b0 md_update_sb.part.0+0x7c6/0xff0 md_update_sb+0x30/0x60 r5l_do_reclaim+0x4f9/0x5e0 r5l_reclaim_thread+0x69/0x30b However, before hanging, the MD_SB_CHANGE_PENDING flag will be set for sb_flags in r5l_write_super_and_discard_space(). This flag will never be cleared because the submit_bio() call never returns. 3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe() will do no processing on any pending stripes and re-set STRIPE_HANDLE. This will cause the raid5d thread to enter an infinite loop, constantly trying to handle the same stripes stuck in the queue. The raid5d thread has a blk_plug that holds a number of bios that are also stuck waiting seeing the thread is in a loop that never schedules. These bios have been accounted for by blk-wbt thus preventing the other threads above from continuing when they try to submit bios. --Deadlock. To fix this, add the same wait_event() that is used in raid5_do_work() to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will schedule and wait until the flag is cleared. The schedule action will flush the plug which will allow the r5l_reclaim thread to continue, thus preventing the deadlock. However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING from the same thread and can thus deadlock if the thread is put to sleep. So avoid waiting if md_check_recovery() is being called in the loop. It's not clear when the deadlock was introduced, but the similar wait_event() call in raid5_do_work() was added in 2017 by this commit: 16d997b78b15 ("md/raid5: simplfy delaying of writes while metadata is updated.") Link: https://lore.kernel.org/r/7f3b87b6-b52a-f737-51d7-a4eec5c44112@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26HID: roccat: Fix use-after-free in roccat_read()Hyunwoo Kim1-0/+4
[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ] roccat_report_event() is responsible for registering roccat-related reports in struct roccat_device. int roccat_report_event(int minor, u8 const *data) { struct roccat_device *device; struct roccat_reader *reader; struct roccat_report *report; uint8_t *new_value; device = devices[minor]; new_value = kmemdup(data, device->report_size, GFP_ATOMIC); if (!new_value) return -ENOMEM; report = &device->cbuf[device->cbuf_end]; /* passing NULL is safe */ kfree(report->value); ... The registered report is stored in the struct roccat_device member "struct roccat_report cbuf[ROCCAT_CBUF_SIZE];". If more reports are received than the "ROCCAT_CBUF_SIZE" value, kfree() the saved report from cbuf[0] and allocates a new reprot. Since there is no lock when this kfree() is performed, kfree() can be performed even while reading the saved report. static ssize_t roccat_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { struct roccat_reader *reader = file->private_data; struct roccat_device *device = reader->device; struct roccat_report *report; ssize_t retval = 0, len; DECLARE_WAITQUEUE(wait, current); mutex_lock(&device->cbuf_lock); ... report = &device->cbuf[reader->cbuf_start]; /* * If report is larger than requested amount of data, rest of report * is lost! */ len = device->report_size > count ? count : device->report_size; if (copy_to_user(buffer, report->value, len)) { retval = -EFAULT; goto exit_unlock; } ... The roccat_read() function receives the device->cbuf report and delivers it to the user through copy_to_user(). If the N+ROCCAT_CBUF_SIZE th report is received while copying of the Nth report->value is in progress, the pointer that copy_to_user() is working on is kfree()ed and UAF read may occur. (race condition) Since the device node of this driver does not set separate permissions, this is not a security vulnerability, but because it is used for requesting screen display of profile or dpi settings, a user using the roccat device can apply udev to this device node or There is a possibility to use it by giving. Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26bcache: fix set_at_max_writeback_rate() for multiple attached devicesColy Li1-21/+52
[ Upstream commit d2d05b88035d2d51a5bb6c5afec88a0880c73df4 ] Inside set_at_max_writeback_rate() the calculation in following if() check is wrong, if (atomic_inc_return(&c->idle_counter) < atomic_read(&c->attached_dev_nr) * 6) Because each attached backing device has its own writeback thread running and increasing c->idle_counter, the counter increates much faster than expected. The correct calculation should be, (counter / dev_nr) < dev_nr * 6 which equals to, counter < dev_nr * dev_nr * 6 This patch fixes the above mistake with correct calculation, and helper routine idle_counter_exceeded() is added to make code be more clear. Reported-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Link: https://lore.kernel.org/r/20220919161647.81238-6-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ata: libahci_platform: Sanity check the DT child nodes numberSerge Semin1-2/+12
[ Upstream commit 3c132ea6508b34956e5ed88d04936983ec230601 ] Having greater than AHCI_MAX_PORTS (32) ports detected isn't that critical from the further AHCI-platform initialization point of view since exceeding the ports upper limit will cause allocating more resources than will be used afterwards. But detecting too many child DT-nodes doesn't seem right since it's very unlikely to have it on an ordinary platform. In accordance with the AHCI specification there can't be more than 32 ports implemented at least due to having the CAP.NP field of 5 bits wide and the PI register of dword size. Thus if such situation is found the DTB must have been corrupted and the data read from it shouldn't be reliable. Let's consider that as an erroneous situation and halt further resources allocation. Note it's logically more correct to have the nports set only after the initialization value is checked for being sane. So while at it let's make sure nports is assigned with a correct value. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26staging: vt6655: fix potential memory leakNam Cao1-1/+1
[ Upstream commit c8ff91535880d41b49699b3829fb6151942de29e ] In function device_init_td0_ring, memory is allocated for member td_info of priv->apTD0Rings[i], with i increasing from 0. In case of allocation failure, the memory is freed in reversed order, with i decreasing to 0. However, the case i=0 is left out and thus memory is leaked. Modify the memory freeing loop to include the case i=0. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Signed-off-by: Nam Cao <namcaov@gmail.com> Link: https://lore.kernel.org/r/20220909141338.19343-1-namcaov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()Wei Yongjun1-3/+3
[ Upstream commit 9d47e01b9d807808224347935562f7043a358054 ] ADP5061_CHG_STATUS_1_CHG_STATUS is masked with 0x07, which means a length of 8, but adp5061_chg_type array size is 4, may end up reading 4 elements beyond the end of the adp5061_chg_type[] array. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26nbd: Fix hung when signal interrupts nbd_start_device_ioctl()Shigeru Yoshida1-2/+4
[ Upstream commit 1de7c3cf48fc41cd95adb12bd1ea9033a917798a ] syzbot reported hung task [1]. The following program is a simplified version of the reproducer: int main(void) { int sv[2], fd; if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0) return 1; if ((fd = open("/dev/nbd0", 0)) < 0) return 1; if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0) return 1; if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0) return 1; if (ioctl(fd, NBD_DO_IT) < 0) return 1; return 0; } When signal interrupt nbd_start_device_ioctl() waiting the condition atomic_read(&config->recv_threads) == 0, the task can hung because it waits the completion of the inflight IOs. This patch fixes the issue by clearing queue, not just shutdown, when signal interrupt nbd_start_device_ioctl(). Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239 [1] Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26scsi: 3w-9xxx: Avoid disabling device if failing to enable itLetu Ren1-1/+1
[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ] The original code will "goto out_disable_device" and call pci_disable_device() if pci_enable_device() fails. The kernel will generate a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled device". We shouldn't disable a device that failed to be enabled. A simple return is fine. Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rateQuanyang Wang1-16/+15
[ Upstream commit 30eaf02149ecc3c5815e45d27187bf09e925071d ] The function zynqmp_pll_round_rate is used to find a most appropriate PLL frequency which the hardware can generate according to the desired frequency. For example, if the desired frequency is 297MHz, considering the limited range from PS_PLL_VCO_MIN (1.5GHz) to PS_PLL_VCO_MAX (3.0GHz) of PLL, zynqmp_pll_round_rate should return 1.872GHz (297MHz * 5). There are two problems with the current code of zynqmp_pll_round_rate: 1) When the rate is below PS_PLL_VCO_MIN, it can't find a correct rate when the parameter "rate" is an integer multiple of *prate, in other words, if "f" is zero, zynqmp_pll_round_rate won't return a valid frequency which is from PS_PLL_VCO_MIN to PS_PLL_VCO_MAX. For example, *prate is 33MHz and the rate is 660MHz, zynqmp_pll_round_rate will not boost up rate and just return 660MHz, and this will cause clk_calc_new_rates failure since zynqmp_pll_round_rate returns an invalid rate out of its boundaries. 2) Even if the rate is higher than PS_PLL_VCO_MIN, there is still a risk that zynqmp_pll_round_rate returns an invalid rate because the function DIV_ROUND_CLOSEST makes some loss in the fractional part. If the parent clock *prate is 33333333Hz and we want to set the PLL rate to 1.5GHz, this function will return 1499999985Hz by using the formula below: value = *prate * DIV_ROUND_CLOSEST(rate, *prate)). This value is also invalid since it's slightly smaller than PS_PLL_VCO_MIN. because DIV_ROUND_CLOSEST makes some loss in the fractional part. Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20220826142030.213805-1-quanyang.wang@windriver.com Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26media: cx88: Fix a null-ptr-deref bug in buffer_prepare()Zheyu Ma2-26/+26
[ Upstream commit 2b064d91440b33fba5b452f2d1b31f13ae911d71 ] When the driver calls cx88_risc_buffer() to prepare the buffer, the function call may fail, resulting in a empty buffer and null-ptr-deref later in buffer_queue(). The following log can reveal it: [ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI [ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500 [ 41.836311] Call Trace: [ 41.836945] __enqueue_in_driver+0x141/0x360 [ 41.837262] vb2_start_streaming+0x62/0x4a0 [ 41.838216] vb2_core_streamon+0x1da/0x2c0 [ 41.838516] __vb2_init_fileio+0x981/0xbc0 [ 41.839141] __vb2_perform_fileio+0xbf9/0x1120 [ 41.840072] vb2_fop_read+0x20e/0x400 [ 41.840346] v4l2_read+0x215/0x290 [ 41.840603] vfs_read+0x162/0x4c0 Fix this by checking the return value of cx88_risc_buffer() [hverkuil: fix coding style issues] Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26clk: zynqmp: Fix stack-out-of-bounds in strncpy`Ian Nam1-0/+7
[ Upstream commit dd80fb2dbf1cd8751efbe4e53e54056f56a9b115 ] "BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68" Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer. This fixes below bug reported by KASAN: ================================================================== BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame: zynqmp_clock_probe+0x0/0x7b8 this frame has 3 objects: [32, 44) 'response' [64, 80) 'ret_payload' [96, 112) 'name' Memory state around the buggy address: ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by: Ian Nam <young.kwan.nam@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220510070154.29528-3-shubhrajyoti.datta@xilinx.com Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26mmc: sdhci-msm: add compatible string check for sdm670Richard Acayan1-0/+1
[ Upstream commit 4de95950d970c71a9e82a24573bb7a44fd95baa1 ] The Snapdragon 670 has the same quirk as Snapdragon 845 (needing to restore the dll config). Add a compatible string check to detect the need for this. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220923014322.33620-3-mailingradian@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm/amdgpu: fix initial connector audio valuehongao1-1/+6
[ Upstream commit 4bb71fce58f30df3f251118291d6b0187ce531e6 ] This got lost somewhere along the way, This fixes audio not working until set_property was called. Signed-off-by: hongao <hongao@uniontech.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26platform/x86: msi-laptop: Change DMI match / alias strings to fix module ↵Hans de Goede1-5/+3
autoloading [ Upstream commit 2a2565272a3628e45d61625e36ef17af7af4e3de ] On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not properly autoload. This is likely caused by issues with how systemd-udevd handles the single quote char (') which is part of the sys_vendor / chassis_vendor strings on this laptop. As a workaround remove the single quote char + everything behind it from the sys_vendor + chassis_vendor matches. This fixes the module not autoloading. Link: https://github.com/systemd/systemd/issues/24715 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220917210407.647432-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm: panel-orientation-quirks: Add quirk for Anbernic Win600Maya Matuszczyk1-0/+6
[ Upstream commit 770e19076065e079a32f33eb11be2057c87f1cde ] This device is another x86 gaming handheld, and as (hopefully) there is only one set of DMI IDs it's using DMI_EXACT_MATCH Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220803182402.1217293-1-maccraft123mc@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm/vc4: vec: Fix timings for VEC modesMateusz Kwiatkowski1-2/+2
[ Upstream commit 30d7565be96b3946c18a1ce3fd538f7946839092 ] This commit fixes vertical timings of the VEC (composite output) modes to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R standards. Previous timings were actually defined as 502 and 601 lines, resulting in non-standard 62.69 Hz and 52 Hz signals being generated, respectively. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm/amd/display: fix overflow on MIN_I64 definitionDavid Gow1-3/+3
[ Upstream commit 6ae0632d17759852c07e2d1e0a31c728eb6ba246 ] The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about integer overflow, because it is treated as a positive value, which is then negated. The temporary positive value is not necessarily representable. This causes the following warning: ../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19: warning: integer overflow in expression ‘-9223372036854775808’ of type ‘long long int’ results in ‘-9223372036854775808’ [-Woverflow] 30 | (int64_t)(-(1LL << 63)) | ^ Writing out (-MAX_I64 - 1) works instead. Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm: Prevent drm_copy_field() to attempt copying a NULL pointerJavier Martinez Canillas1-0/+6
[ Upstream commit f6ee30407e883042482ad4ad30da5eaba47872ee ] There are some struct drm_driver fields that are required by drivers since drm_copy_field() attempts to copy them to user-space via DRM_IOCTL_VERSION. But it can be possible that a driver has a bug and did not set some of the fields, which leads to drm_copy_field() attempting to copy a NULL pointer: [ +10.395966] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000 [ +0.010955] Mem abort info: [ +0.002835] ESR = 0x0000000096000004 [ +0.003872] EC = 0x25: DABT (current EL), IL = 32 bits [ +0.005395] SET = 0, FnV = 0 [ +0.003113] EA = 0, S1PTW = 0 [ +0.003182] FSC = 0x04: level 0 translation fault [ +0.004964] Data abort info: [ +0.002919] ISV = 0, ISS = 0x00000004 [ +0.003886] CM = 0, WnR = 0 [ +0.003040] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000115dad000 [ +0.006536] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ +0.006925] Internal error: Oops: 96000004 [#1] SMP ... [ +0.011113] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ +0.007061] pc : __pi_strlen+0x14/0x150 [ +0.003895] lr : drm_copy_field+0x30/0x1a4 [ +0.004156] sp : ffff8000094b3a50 [ +0.003355] x29: ffff8000094b3a50 x28: ffff8000094b3b70 x27: 0000000000000040 [ +0.007242] x26: ffff443743c2ba00 x25: 0000000000000000 x24: 0000000000000040 [ +0.007243] x23: ffff443743c2ba00 x22: ffff8000094b3b70 x21: 0000000000000000 [ +0.007241] x20: 0000000000000000 x19: ffff8000094b3b90 x18: 0000000000000000 [ +0.007241] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab14b9af40 [ +0.007241] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ +0.007239] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa524ad67d4d8 [ +0.007242] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : 6c6e6263606e7141 [ +0.007239] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ +0.007241] x2 : 0000000000000000 x1 : ffff8000094b3b90 x0 : 0000000000000000 [ +0.007240] Call trace: [ +0.002475] __pi_strlen+0x14/0x150 [ +0.003537] drm_version+0x84/0xac [ +0.003448] drm_ioctl_kernel+0xa8/0x16c [ +0.003975] drm_ioctl+0x270/0x580 [ +0.003448] __arm64_sys_ioctl+0xb8/0xfc [ +0.003978] invoke_syscall+0x78/0x100 [ +0.003799] el0_svc_common.constprop.0+0x4c/0xf4 [ +0.004767] do_el0_svc+0x38/0x4c [ +0.003357] el0_svc+0x34/0x100 [ +0.003185] el0t_64_sync_handler+0x11c/0x150 [ +0.004418] el0t_64_sync+0x190/0x194 [ +0.003716] Code: 92402c04 b200c3e8 f13fc09f 5400088c (a9400c02) [ +0.006180] ---[ end trace 0000000000000000 ]--- Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-3-javierm@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm: Use size_t type for len variable in drm_copy_field()Javier Martinez Canillas1-1/+1
[ Upstream commit 94dc3471d1b2b58b3728558d0e3f264e9ce6ff59 ] The strlen() function returns a size_t which is an unsigned int on 32-bit arches and an unsigned long on 64-bit arches. But in the drm_copy_field() function, the strlen() return value is assigned to an 'int len' variable. Later, the len variable is passed as copy_from_user() third argument that is an unsigned long parameter as well. In theory, this can lead to an integer overflow via type conversion. Since the assignment happens to a signed int lvalue instead of a size_t lvalue. In practice though, that's unlikely since the values copied are set by DRM drivers and not controlled by userspace. But using a size_t for len is the correct thing to do anyways. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-2-javierm@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc()Jianglei Nie1-1/+3
[ Upstream commit 6dc548745d5b5102e3c53dc5097296ac270b6c69 ] nouveau_bo_alloc() allocates a memory chunk for "nvbo" with kzalloc(). When some error occurs, "nvbo" should be released. But when WARN_ON(pi < 0)) equals true, the function return ERR_PTR without releasing the "nvbo", which will lead to a memory leak. We should release the "nvbo" with kfree() if WARN_ON(pi < 0)) equals true. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220705094306.2244103-1-niejianglei2021@163.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26r8152: Rate limit overflow messagesAndrew Gaul1-1/+3
[ Upstream commit 93e2be344a7db169b7119de21ac1bf253b8c6907 ] My system shows almost 10 million of these messages over a 24-hour period which pollutes my logs. Signed-off-by: Andrew Gaul <gaul@google.com> Link: https://lore.kernel.org/r/20221002034128.2026653-1-gaul@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26wifi: rt2x00: correctly set BBP register 86 for MT7620Daniel Golle1-1/+4
[ Upstream commit c9aada64fe6493461127f1522d7e2f01792d2424 ] Instead of 0 set the correct value for BBP register 86 for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26wifi: rt2x00: set SoC wmac clock registerDaniel Golle1-0/+21
[ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ] Instead of using the default value 33 (pci), set US_CYC_CNT init based on Programming guide: If available, set chipset bus clock with fallback to cpu clock/3. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26wifi: rt2x00: set VGC gain for both chains of MT7620Daniel Golle1-1/+2
[ Upstream commit 0e09768c085709e10ece3b68f6ac921d3f6a9caa ] Set bbp66 for all chains of the MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620Daniel Golle1-1/+1
[ Upstream commit eeb50acf15762b61921f9df18663f839f387c054 ] Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the vendor driver[1]. [1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620Daniel Golle1-1/+2
[ Upstream commit d3aad83d05aec0cfd7670cf0028f2ad4b81de92e ] The function rt2800_iq_calibrate is intended for Rt5592 only. Don't call it for MT7620 which has it's own calibration functions. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 13:45:29 +0300