summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-12-05net: fec: fix clock count mis-matchChuhong Yuan1-4/+11
commit a31eda65ba210741b598044d045480494d0ed52a upstream. pm_runtime_put_autosuspend in probe will call runtime suspend to disable clks automatically if CONFIG_PM is defined. (If CONFIG_PM is not defined, its implementation will be empty, then runtime suspend will not be called.) Therefore, we can call pm_runtime_get_sync to runtime resume it first to enable clks, which matches the runtime suspend. (Only when CONFIG_PM is defined, otherwise pm_runtime_get_sync will also be empty, then runtime resume will not be called.) Then it is fine to disable clks without causing clock count mis-match. Fixes: c43eab3eddb4 ("net: fec: add missed clk_disable_unprepare in remove") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input sizeHans de Goede1-2/+2
commit f3e4f3fc8ee9729c4b1b27a478c68b713df53c0c upstream. The AML code implementing the WMI methods creates a variable length field to hold the input data we pass like this: CreateDWordField (Arg1, 0x0C, DSZI) Local5 = DSZI /* \HWMC.DSZI */ CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN) If we pass 0 as bios_args.datasize argument then (Local5 * 0x08) is 0 which results in these errors: [ 71.973305] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20190816/dsopcode-133) [ 71.973332] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529) [ 71.973413] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529) And in our HPWMI_WIRELESS2_QUERY calls always failing. for read commands like HPWMI_WIRELESS2_QUERY the DSZI value is not used / checked, except for read commands where extra input is needed to specify exactly what to read. So for HPWMI_WIRELESS2_QUERY we can safely pass the size of the expected output as insize to hp_wmi_perform_query(), as we are already doing for all other HPWMI_READ commands we send. Doing so fixes these errors. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05platform/x86: hp-wmi: Fix ACPI errors caused by too small bufferHans de Goede1-3/+3
commit 16245db1489cd9aa579506f64afeeeb13d825a93 upstream. The HP WMI calls may take up to 128 bytes of data as input, and the AML methods implementing the WMI calls, declare a couple of fields for accessing input in different sizes, specifycally the HWMC method contains: CreateField (Arg1, 0x80, 0x0400, D128) Even though we do not use any of the WMI command-types which need a buffer of this size, the APCI interpreter still tries to create it as it is declared in generoc code at the top of the HWMC method which runs before the code looks at which command-type is requested. This results in many of these errors on many different HP laptop models: [ 14.459261] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20170303/dsopcode-236) [ 14.459268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8edcc61507f8), AE_AML_BUFFER_LIMIT (20170303/psparse-543) [ 14.459279] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8edcc61523c0), AE_AML_BUFFER_LIMIT (20170303/psparse-543) This commit increases the size of the data element of the bios_args struct to 128 bytes fixing these errors. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05HID: core: check whether Usage Page item is after Usage ID itemsCandle Sun1-6/+45
commit 1cb0d2aee26335d0bccf29100c7bed00ebece851 upstream. Upstream commit 58e75155009c ("HID: core: move Usage Page concatenation to Main item") adds support for Usage Page item after Usage ID items (such as keyboards manufactured by Primax). Usage Page concatenation in Main item works well for following report descriptor patterns: USAGE_PAGE (Keyboard) 05 07 USAGE_MINIMUM (Keyboard LeftControl) 19 E0 USAGE_MAXIMUM (Keyboard Right GUI) 29 E7 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (8) 95 08 INPUT (Data,Var,Abs) 81 02 ------------- USAGE_MINIMUM (Keyboard LeftControl) 19 E0 USAGE_MAXIMUM (Keyboard Right GUI) 29 E7 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (8) 95 08 USAGE_PAGE (Keyboard) 05 07 INPUT (Data,Var,Abs) 81 02 But it makes the parser act wrong for the following report descriptor pattern(such as some Gamepads): USAGE_PAGE (Button) 05 09 USAGE (Button 1) 09 01 USAGE (Button 2) 09 02 USAGE (Button 4) 09 04 USAGE (Button 5) 09 05 USAGE (Button 7) 09 07 USAGE (Button 8) 09 08 USAGE (Button 14) 09 0E USAGE (Button 15) 09 0F USAGE (Button 13) 09 0D USAGE_PAGE (Consumer Devices) 05 0C USAGE (Back) 0a 24 02 USAGE (HomePage) 0a 23 02 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (11) 95 0B INPUT (Data,Var,Abs) 81 02 With Usage Page concatenation in Main item, parser recognizes all the 11 Usages as consumer keys, it is not the HID device's real intention. This patch checks whether Usage Page is really defined after Usage ID items by comparing usage page using status. Usage Page concatenation on currently defined Usage Page will always do in local parsing when Usage ID items encountered. When Main item is parsing, concatenation will do again with last defined Usage Page if this page has not been used in the previous usages concatenation. Signed-off-by: Candle Sun <candle.sun@unisoc.com> Signed-off-by: Nianfu Bai <nianfu.bai@unisoc.com> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Siarhei Vishniakou <svv@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05slip: Fix use-after-free Read in slip_openJouni Hogander1-0/+1
[ Upstream commit e58c1912418980f57ba2060017583067f5f71e52 ] Slip_open doesn't clean-up device which registration failed from the slip_devs device list. On next open after failure this list is iterated and freed device is accessed. Fix this by calling sl_free_netdev in error path. Here is the trace from the Syzbot: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3b5a39979daf ("slip: Fix memory leak in slip_open error path") Reported-by: syzbot+4d5170758f3762109542@syzkaller.appspotmail.com Cc: David Miller <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net: macb: add missed tasklet_killChuhong Yuan1-0/+1
[ Upstream commit 61183b056b49e2937ff92a1424291ba36a6f6d05 ] This driver forgets to kill tasklet in remove. Add the call to fix it. Fixes: 032dc41ba6e2 ("net: macb: Handle HRESP error") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net: dsa: sja1105: fix sja1105_parse_rgmii_delays()Oleksij Rempel1-5/+5
[ Upstream commit 9bca3a0a923fc3f0fb9e41391be1d0f291e86858 ] This function was using configuration of port 0 in devicetree for all ports. In case CPU port was not 0, the delay settings was ignored. This resulted not working communication between CPU and the switch. Fixes: f5b8631c293b ("net: dsa: sja1105: Error out if RGMII delays are requested in DT") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05mdio_bus: don't use managed reset-controllerDavid Bauer1-2/+4
[ Upstream commit 32085f25d7b68404055f3525c780142fc72e543f ] Geert Uytterhoeven reported that using devm_reset_controller_get leads to a WARNING when probing a reset-controlled PHY. This is because the device devm_reset_controller_get gets supplied is not actually the one being probed. Acquire an unmanaged reset-control as well as free the reset_control on unregister to fix this. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05macvlan: schedule bc_work even if errorMenglong Dong1-1/+2
[ Upstream commit 1d7ea55668878bb350979c377fc72509dd6f5b21 ] While enqueueing a broadcast skb to port->bc_queue, schedule_work() is called to add port->bc_work, which processes the skbs in bc_queue, to "events" work queue. If port->bc_queue is full, the skb will be discarded and schedule_work(&port->bc_work) won't be called. However, if port->bc_queue is full and port->bc_work is not running or pending, port->bc_queue will keep full and schedule_work() won't be called any more, and all broadcast skbs to macvlan will be discarded. This case can happen: macvlan_process_broadcast() is the pending function of port->bc_work, it moves all the skbs in port->bc_queue to the queue "list", and processes the skbs in "list". During this, new skbs will keep being added to port->bc_queue in macvlan_broadcast_enqueue(), and port->bc_queue may already full when macvlan_process_broadcast() return. This may happen, especially when there are a lot of real-time threads and the process is preempted. Fix this by calling schedule_work(&port->bc_work) even if port->bc_work is full in macvlan_broadcast_enqueue(). Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05gve: Fix the queue page list allocated pages countJeroen de Borst1-1/+2
[ Upstream commit a95069ecb7092d03b2ea1c39ee04514fe9627540 ] In gve_alloc_queue_page_list(), when a page allocation fails, qpl->num_entries will be wrong. In this case priv->num_registered_pages can underflow in gve_free_queue_page_list(), causing subsequent calls to gve_alloc_queue_page_list() to fail. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05thunderbolt: Power cycle the router if NVM authentication failsMika Westerberg1-12/+42
commit 7a7ebfa85f4fac349f3ab219538c44efe18b0cf6 upstream. On zang's Dell XPS 13 9370 after Thunderbolt NVM firmware upgrade the Thunderbolt controller did not come back as expected. Only after the system was rebooted it became available again. It is not entirely clear what happened but I suspect the new NVM firmware image authentication failed for some reason. Regardless of this the router needs to be power cycled if NVM authentication fails in order to get it fully functional again. This modifies the driver to issue a power cycle in case the NVM authentication fails immediately when dma_port_flash_update_auth() returns. We also need to call tb_switch_set_uuid() earlier to be able to fetch possible NVM authentication failure when DMA port is added. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205457 Reported-by: zang <dump@tzib.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05mei: me: add comet point V device idAlexander Usyskin2-0/+2
commit 82b29b9f72afdccb40ea5f3c13c6a3cb65a597bc upstream. Comet Point (Comet Lake) V device id. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191105150514.14010-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05mei: bus: prefix device names on bus with the bus nameAlexander Usyskin1-4/+5
commit 7a2b9e6ec84588b0be65cc0ae45a65bac431496b upstream. Add parent device name to the name of devices on bus to avoid device names collisions for same client UUID available from different MEI heads. Namely this prevents sysfs collision under /sys/bus/mei/device/ In the device part leave just UUID other parameters that are required for device matching are not required here and are just bloating the name. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191105150514.14010-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9PFabio D'Urso2-0/+10
commit c1a1f273d0825774c80896b8deb1c9ea1d0b91e3 upstream. This device presents itself as a USB hub with three attached devices: - An ACM serial port connected to the GPS module (not affected by this commit) - An FTDI serial port connected to the GPS module (1546:0502) - Another FTDI serial port connected to the ODIN-W2 radio module (1546:0503) This commit registers U-Blox's VID and the PIDs of the second and third devices. Datasheet: https://www.u-blox.com/sites/default/files/C099-F9P-AppBoard-Mbed-OS3-FW_UserGuide_%28UBX-18063024%29.pdf Signed-off-by: Fabio D'Urso <fabiodurso@hotmail.it> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05staging: rtl8723bs: Add 024c:0525 to the list of SDIO device-idsHans de Goede1-0/+1
commit 3d5f1eedbfd22ceea94b39989d6021b1958181f4 upstream. Add 024c:0525 to the list of SDIO device-ids, based on a patch found in the Android X86 kernels. According to that patch this device id is used on the Alcatel Plus 10 device. Reported-and-tested-by: youling257 <youling257@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111113846.24940-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05staging: rtl8723bs: Drop ACPI device idsHans de Goede1-6/+0
commit 2d9d2491530a156b9a5614adf9dc79285e35d55e upstream. The driver only binds by SDIO device-ids, all the ACPI device-id does is causing the driver to load unnecessarily on devices where the DSDT contains a bogus OBDA8723 device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111113846.24940-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05staging: rtl8192e: fix potential use after freePan Bian1-2/+3
commit b7aa39a2ed0112d07fc277ebd24a08a7b2368ab9 upstream. The variable skb is released via kfree_skb() when the return value of _rtl92e_tx is not zero. However, after that, skb is accessed again to read its length, which may result in a use after free bug. This patch fixes the bug by moving the release operation to where skb is never used later. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1572965351-6745-1-git-send-email-bianpan2016@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05staging: wilc1000: fix illegal memory access in wilc_parse_join_bss_param()Ajay Singh1-10/+15
commit c7e621bb981b76d3bfd8a595070ee8282ac4a32b upstream. Do not copy the extended supported rates in 'param->supp_rates' if the array is already full with basic rates values. The array size check helped to avoid possible illegal memory access [1] while copying to 'param->supp_rates' array. 1. https://marc.info/?l=linux-next&m=157301720517456&w=2 Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1487400 ("Memory - illegal accesses") Fixes: 4e0b0f42c9c7 ("staging: wilc1000: use struct to pack join parameters for FW") Cc: stable@vger.kernel.org Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Link: https://lore.kernel.org/r/20191106062127.3165-1-ajay.kathat@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05usb: dwc2: use a longer core rest timeout in dwc2_core_reset()Mathias Kresin1-1/+1
commit 6689f0f4bb14e50917ba42eb9b41c25e0184970c upstream. Testing on different generations of Lantiq MIPS SoC based boards, showed that it takes up to 1500 us until the core reset bit is cleared. The driver from the vendor SDK (ifxhcd) uses a 1 second timeout. Use the same timeout to fix wrong hang detections and make the driver work for Lantiq MIPS SoCs. At least till kernel 4.14 the hanging reset only caused a warning but the driver was probed successful. With kernel 4.19 errors out with EBUSY. Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05clk: at91: fix update bit maps on CFG_MOR writeEugen Hristev1-1/+1
commit 263eaf8f172d9f44e15d6aca85fe40ec18d2c477 upstream. The regmap update bits call was not selecting the proper mask, considering the bits which was updating. Update the mask from call to also include OSCBYPASS. Removed MOSCEN which was not updated. Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1568042692-11784-1-git-send-email-eugen.hristev@microchip.com Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05i40e: Fix for ethtool -m issue on X722 NICArkadiusz Kubalewski1-1/+2
[ Upstream commit 4c9da6f2b8a029052c75bd4a61ae229135831177 ] This patch contains fix for a problem with command: 'ethtool -m <dev>' which breaks functionality of: 'ethtool <dev>' when called on X722 NIC Disallowed update of link phy_types on X722 NIC Currently correct value cannot be obtained from FW Previously wrong value returned by FW was used and was a root cause for incorrect output of 'ethtool <dev>' command Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05iavf: initialize ITRN registers with correct valuesNicholas Nunley1-2/+2
[ Upstream commit 4eda4e0096842764d725bcfd77471a419832b074 ] Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg value for ITR defines") the driver tracks the interrupt throttling intervals in single usec units, although the actual ITRN registers are programmed in 2 usec units. Most register programming flows in the driver correctly handle the conversion, although it is currently not applied when the registers are initialized to their default values. Most of the time this doesn't present a problem since the default values are usually immediately overwritten through the standard adaptive throttling mechanism, or updated manually by the user, but if adaptive throttling is disabled and the interval values are left alone then the incorrect value will persist. Since the intended default interval of 50 usecs (vs. 100 usecs as programmed) performs better for most traffic workloads, this can lead to performance regressions. This patch adds the correct conversion when writing the initial values to the ITRN registers. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05ice: fix potential infinite loop because loop counter being too smallColin Ian King1-1/+1
[ Upstream commit 615457a226f042bffc3a1532afb244cab37460d4 ] Currently the for-loop counter i is a u8 however it is being checked against a maximum value hw->num_tx_sched_layers which is a u16. Hence there is a potential wrap-around of counter i back to zero if hw->num_tx_sched_layers is greater than 255. Fix this by making i a u16. Addresses-Coverity: ("Infinite loop") Fixes: b36c598c999c ("ice: Updates to Tx scheduler code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05pwm: bcm-iproc: Prevent unloading the driver module while in useUwe Kleine-König1-0/+1
[ Upstream commit 24906a41eecb73d51974ade0847c21e429beec60 ] The owner member of struct pwm_ops must be set to THIS_MODULE to increase the reference count of the module such that the module cannot be removed while its code is in use. Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05block: drbd: remove a stray unlock in __drbd_send_protocol()Dan Carpenter1-1/+0
[ Upstream commit 8e9c523016cf9983b295e4bc659183d1fa6ef8e0 ] There are two callers of this function and they both unlock the mutex so this ends up being a double unlock. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net: stmmac: xgmac: Disable Flow Control when 1 or more queues are in AVJose Abreu1-0/+2
[ Upstream commit 132f2f20c9866325d12c155aca06d260f358d3cb ] When in AVB mode we need to disable flow control to prevent MAC from pausing in TX side. Fixes: ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net: stmmac: xgmac: Fix TSA selectionJose Abreu1-0/+1
[ Upstream commit 97add93fbcfa566735d6a4b96684110d356ebd35 ] When we change between Transmission Scheduling Algorithms, we need to clear previous values so that the new chosen algorithm is correctly selected. Fixes: ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net: stmmac: xgmac: bitrev32 returns u32Jose Abreu1-1/+1
[ Upstream commit 3d00e45d498fd5347cea653ef494c56731b651e0 ] The bitrev32 function returns an u32 var, not an int. Fix it. Fixes: 0efedbf11f07 ("net: stmmac: xgmac: Fix XGMAC selftests") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net: stmmac: gmac4: bitrev32 returns u32Jose Abreu1-1/+1
[ Upstream commit 4d7c47e34fab0d25790bb6e85b85e26fdf0090d5 ] The bitrev32 function returns an u32 var, not an int. Fix it. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9changzhu1-0/+7
[ Upstream commit 440a7a54e7ec012ec8b27c27e460dfd6f9a24ddb ] It needs to add warning to update firmware in gfx9 in case that firmware is too old to have function to realize dummy read in cp firmware. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05drm/amdgpu: register gpu instance before fan boost feature enablmentEvan Quan2-1/+7
[ Upstream commit 6a299d7aaa97dfde5988d8f9e2fa2c046b5793ff ] Otherwise, the feature enablement will be skipped due to wrong count. Fixes: beff74bc6e0fa91 ("drm/amdgpu: fix a race in GPU reset with IB test (v2)") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05drm/amd/swSMU: fix smu workload bit map errorKevin Wang2-2/+2
[ Upstream commit 38264de0dce80d223f358ce47512378fae0de586 ] fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error on vega20 and navi asic. fix commit: drm/amd/powerplay: add function get_workload_type_map for swsmu Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net: mscc: ocelot: fix __ocelot_rmw_ix prototypeVladimir Oltean1-1/+1
[ Upstream commit 17fdd7638cb687cd7f15a48545f25d738f0101e0 ] The "read-modify-write register index" function is declared with a confusing prototype: the "mask" and "reg" arguments are swapped. Fortunately, this does not affect callers so far. Both arguments are u32, and the wrapper macros (ocelot_rmw_ix etc) have the arguments in the correct order (the one from ocelot_io.c). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net/mlx5e: Use correct enum to determine uplink portDmytro Linkin1-1/+2
[ Upstream commit 950d3af70ea89cf7ac51d734a634174013631192 ] For vlan push action, if eswitch flow source capability is enabled, flow source value compared with MLX5_VPORT_UPLINK enum, to determine uplink port. This lead to syndrome in dmesg if try to add vlan push action. For example: $ tc filter add dev vxlan0 ingress protocol ip prio 1 flower \ enc_dst_port 4789 \ action tunnel_key unset pipe \ action vlan push id 20 pipe \ action mirred egress redirect dev ens1f0_0 $ dmesg ... [ 2456.883693] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 5273): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa9c090) Use the correct enum value MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK. Fixes: bb204dcf39fe ("net/mlx5e: Determine source port properly for vlan push action") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net/mlx5e: Fix eswitch debug print of max fdb flowRoi Dayan1-1/+1
[ Upstream commit f382b0df6946d48fae80a2201ccff43b41382099 ] The value is already the calculation so remove the log prefix. Fixes: e52c28024008 ("net/mlx5: E-Switch, Add chains and priorities") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05drm/amdgpu: dont schedule jobs while in resetShirish S1-1/+4
[ Upstream commit f2efc6e60089c99c342a6b7da47f1037e06c4296 ] [Why] doing kthread_park()/unpark() from drm_sched_entity_fini while GPU reset is in progress defeats all the purpose of drm_sched_stop->kthread_park. If drm_sched_entity_fini->kthread_unpark() happens AFTER drm_sched_stop->kthread_park nothing prevents from another (third) thread to keep submitting job to HW which will be picked up by the unparked scheduler thread and try to submit to HW but fail because the HW ring is deactivated. [How] grab the reset lock before calling drm_sched_entity_fini() Signed-off-by: Shirish S <shirish.s@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net: bcmgenet: reapply manual settings to the PHYDoug Berger1-1/+4
[ Upstream commit 0686bd9d5e6863f60e4bb1e78e6fe7bb217a0890 ] The phy_init_hw() function may reset the PHY to a configuration that does not match manual network settings stored in the phydev structure. If the phy state machine is polled rather than event driven this can create a timing hazard where the phy state machine might alter the settings stored in the phydev structure from the value read from the BMCR. This commit follows invocations of phy_init_hw() by the bcmgenet driver with invocations of the genphy_config_aneg() function to ensure that the BMCR is written to match the settings held in the phydev structure. This prevents the risk of manual settings being accidentally altered. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net: bcmgenet: use RGMII loopback for MAC resetDoug Berger2-2/+33
[ Upstream commit 3a55402c93877d291b0a612d25edb03d1b4b93ac ] As noted in commit 28c2d1a7a0bf ("net: bcmgenet: enable loopback during UniMAC sw_reset") the UniMAC must be clocked while sw_reset is asserted for its state machines to reset cleanly. The transmit and receive clocks used by the UniMAC are derived from the signals used on its PHY interface. The bcmgenet MAC can be configured to work with different PHY interfaces including MII, GMII, RGMII, and Reverse MII on internal and external interfaces. Unfortunately for the UniMAC, when configured for MII the Tx clock is always driven from the PHY which places it outside of the direct control of the MAC. The earlier commit enabled a local loopback mode within the UniMAC so that the receive clock would be derived from the transmit clock which addressed the observed issue with an external GPHY disabling it's Rx clock. However, when a Tx clock is not available this loopback is insufficient. This commit implements a workaround that leverages the fact that the MAC can reliably generate all of its necessary clocking by enterring the external GPHY RGMII interface mode with the UniMAC in local loopback during the sw_reset interval. Unfortunately, this has the undesirable side efect of the RGMII GTXCLK signal being driven during the same window. In most configurations this is a benign side effect as the signal is either not routed to a pin or is already expected to drive the pin. The one exception is when an external MII PHY is expected to drive the same pin with its TX_CLK output creating output driver contention. This commit exploits the IEEE 802.3 clause 22 standard defined isolate mode to force an external MII PHY to present a high impedance on its TX_CLK output during the window to prevent any contention at the pin. The MII interface is used internally with the 40nm internal EPHY which agressively disables its clocks for power savings leading to incomplete resets of the UniMAC and many instabilities observed over the years. The workaround of this commit is expected to put an end to those problems. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05watchdog: bd70528: Add MODULE_ALIAS to allow module auto loadingMatti Vaittinen1-0/+1
[ Upstream commit 81363f248aecd2b5f10547af268a4dfaf8963489 ] The bd70528 watchdog driver is probed by MFD driver. Add MODULE_ALIAS in order to allow udev to load the module when MFD sub-device cell for watchdog is added. Fixes: bbc88a0ec9f37 ("watchdog: bd70528: Initial support for ROHM BD70528 watchdog block") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware formatAnson Huang1-1/+7
[ Upstream commit 2c50a6b825b3463a7600d6e6acadba73211c3d2c ] SCU firmware calculates pretimeout based on current time stamp instead of watchdog timeout stamp, need to convert the pretimeout to SCU firmware's timeout value. Fixes: 15f7d7fc5542 ("watchdog: imx_sc: Add pretimeout support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05watchdog: meson: Fix the wrong value of left timeXingyu Chen1-2/+2
[ Upstream commit 2c77734642d52448aca673e889b39f981110828b ] The left time value is wrong when we get it by sysfs. The left time value should be equal to preset timeout value minus elapsed time value. According to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved to BIT[16-31] of the WATCHDOG_TCNT. [0]: http://linux-meson.com Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver") Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05watchdog: pm8916_wdt: fix pretimeout registration flowJorge Ramirez-Ortiz1-4/+11
[ Upstream commit 1993f1d7ca3f315e0459c58c8e7038039a96dd85 ] When an IRQ is present in the dts, the probe function shall fail if the interrupt can not be registered. The probe function shall also be retried if getting the irq is being deferred. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05nvme-multipath: fix crash in nvme_mpath_clear_ctrl_pathsAnton Eidelman1-0/+2
[ Upstream commit 763303a83a095a88c3a8a0d1abf97165db2e8bf5 ] nvme_mpath_clear_ctrl_paths() iterates through the ctrl->namespaces list while holding ctrl->scan_lock. This does not seem to be the correct way of protecting from concurrent list modification. Specifically, nvme_scan_work() sorts ctrl->namespaces AFTER unlocking scan_lock. This may result in the following (rare) crash in ctrl disconnect during scan_work: BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core] ... Call Trace: nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core] nvme_remove_namespaces+0x35/0xe0 [nvme_core] nvme_do_delete_ctrl+0x47/0x90 [nvme_core] nvme_sysfs_delete+0x49/0x60 [nvme_core] dev_attr_store+0x17/0x30 sysfs_kf_write+0x3e/0x50 kernfs_fop_write+0x11e/0x1a0 __vfs_write+0x1b/0x40 vfs_write+0xb9/0x1a0 ksys_write+0x67/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x5a/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f8d02bfb154 Fix: After taking scan_lock in nvme_mpath_clear_ctrl_paths() down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe. This will not cause deadlocks because taking scan_lock never happens while holding the namespaces_rwsem. Moreover, scan work downs namespaces_rwsem in the same order. Alternative: sort ctrl->namespaces in nvme_scan_work() while still holding the scan_lock. This would leave nvme_mpath_clear_ctrl_paths() without correct protection against ctrl->namespaces modification by anyone other than scan_work. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05nvme-rdma: fix a segmentation fault during module unloadMax Gurtovoy1-0/+8
[ Upstream commit 9ad9e8d6ca29c1446d81c6518ae634a2141dfd22 ] In case there are controllers that are not associated with any RDMA device (e.g. during unsuccessful reconnection) and the user will unload the module, these controllers will not be freed and will access already freed memory. The same logic appears in other fabric drivers as well. Fixes: 87fd125344d6 ("nvme-rdma: remove redundant reference between ib_device and tagset") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05can: mcp251x: mcp251x_restart_work_handler(): Fix potential force_quit race ↵Timo Schlüßler1-1/+1
condition [ Upstream commit 27a0e54bae09d2dd023a01254db506d61cc50ba1 ] In mcp251x_restart_work_handler() the variable to stop the interrupt handler (priv->force_quit) is reset after the chip is restarted and thus a interrupt might occur. This patch fixes the potential race condition by resetting force_quit before enabling interrupts. Signed-off-by: Timo Schlüßler <schluessler@krause.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05can: flexcan: increase error counters if skb enqueueing via ↵Marc Kleine-Budde1-2/+8
can_rx_offload_queue_sorted() fails [ Upstream commit 758124335a9dd649ab820bfb5b328170919ee7dc ] The call to can_rx_offload_queue_sorted() may fail and return an error (in the current implementation due to resource shortage). The passed skb is consumed. This patch adds incrementing of the appropriate error counters to let the device statistics reflect that there's a problem. Reported-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05can: rx-offload: can_rx_offload_irq_offload_fifo(): continue on errorMarc Kleine-Budde1-1/+3
[ Upstream commit 1f7f504dcd9d1262437bdcf4fa071e41dec1af03 ] In case of a resource shortage, i.e. the rx_offload queue will overflow or a skb fails to be allocated (due to OOM), can_rx_offload_offload_one() will call mailbox_read() to discard the mailbox and return an ERR_PTR. If the hardware FIFO is empty can_rx_offload_offload_one() will return NULL. In case a CAN frame was read from the hardware, can_rx_offload_offload_one() returns the skb containing it. Without this patch can_rx_offload_irq_offload_fifo() bails out if no skb returned, regardless of the reason. Similar to can_rx_offload_irq_offload_timestamp() in case of a resource shortage the whole FIFO should be discarded, to avoid an IRQ storm and give the system some time to recover. However if the FIFO is empty the loop can be left. With this patch the loop is left in case of empty FIFO, but not on errors. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05can: rx-offload: can_rx_offload_irq_offload_timestamp(): continue on errorJeroen Hofstee1-1/+1
[ Upstream commit c2a9f74c9d18acfdcabd3361adc7eac82c537a66 ] In case of a resource shortage, i.e. the rx_offload queue will overflow or a skb fails to be allocated (due to OOM), can_rx_offload_offload_one() will call mailbox_read() to discard the mailbox and return an ERR_PTR. However can_rx_offload_irq_offload_timestamp() bails out in the error case. In case of a resource shortage all mailboxes should be discarded, to avoid an IRQ storm and give the system some time to recover. Since can_rx_offload_irq_offload_timestamp() is typically called from a while loop, all message will eventually be discarded. So let's continue on error instead to discard them directly. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05can: rx-offload: can_rx_offload_offload_one(): use ERR_PTR() to propagate ↵Marc Kleine-Budde1-13/+73
error value in case of errors [ Upstream commit d763ab3044f0bf50bd0e6179f6b2cf1c125d1d94 ] Before this patch can_rx_offload_offload_one() returns a pointer to a skb containing the read CAN frame or a NULL pointer. However the meaning of the NULL pointer is ambiguous, it can either mean the requested mailbox is empty or there was an error. This patch fixes this situation by returning: - pointer to skb on success - NULL pointer if mailbox is empty - ERR_PTR() in case of an error All users of can_rx_offload_offload_one() have been adopted, no functional change intended. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05can: rx-offload: can_rx_offload_offload_one(): increment rx_fifo_errors on ↵Marc Kleine-Budde1-1/+3
queue overflow or OOM [ Upstream commit 4e9016bee3bf0c24963097edace034ff205b565c ] If the rx-offload skb_queue is full or the skb allocation fails (due to OOM), the mailbox contents is discarded. This patch adds the incrementing of the rx_fifo_errors statistics counter. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-25 01:50:24 +0300