summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-07-23ieee802154: move headers out of extra directoryDmitry Eremin-Solenikov1-4/+4
include/net/ieee802154/af_ieee802154.h (and others) naming seems to be too long and redundant. Drop one level of subdirectories. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-07-23IEEE80154: Add documentation to the IEEE80154 netlink and fakehard driverDaniel Silverstone1-0/+120
This adds some perfunctory documentation comments to the IEEE 802.15.4 fakehard.c driver (Fake hard MAC) and the nl802154.h (outgoing netlink messages) header. These comments are not necessarily complete, but they do reference the IEEE 802.15.4-2006 document where possible. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
2009-06-25Merge git://git.infradead.org/battery-2.6Linus Torvalds7-17/+401
* git://git.infradead.org/battery-2.6: da9030_battery: Fix race between event handler and monitor Add MAX17040 Fuel Gauge driver w1: ds2760_battery: add support for sleep mode feature w1: ds2760: add support for EEPROM read and write ds2760_battery: cleanups in ds2760_battery_probe()
2009-06-24Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds13-469/+507
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: Staging: octeon-ethernet: Fix race freeing transmit buffers. Staging: octeon-ethernet: Convert to use net_device_ops. MIPS: Cavium: Add CPU hotplugging code. MIPS: SMP: Allow suspend and hibernation if CPU hotplug is available MIPS: Add arch generic CPU hotplug DMA: txx9dmac: use dma_unmap_single if DMA_COMPL_{SRC,DEST}_UNMAP_SINGLE set MIPS: Sibyte: Fix build error if CONFIG_SERIAL_SB1250_DUART is undefined. MIPS: MIPSsim: Fix build error if MSC01E_INT_BASE is undefined. MIPS: Hibernation: Remove SMP TLB and cacheflushing code. MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users. MIPS: bug.h Build fix - include <linux/compiler.h>.
2009-06-24Staging: octeon-ethernet: Fix race freeing transmit buffers.David Daney4-66/+106
The existing code had the following race: Thread-1 Thread-2 inc/read in_use inc/read in_use inc tx_free_list[qos].len inc tx_free_list[qos].len The actual in_use value was incremented twice, but thread-1 is going to free memory based on its stale value, and will free one too many times. The result is that memory is freed back to the kernel while its packet is still in the transmit buffer. If the memory is overwritten before it is transmitted, the hardware will put a valid checksum on it and send it out (just like it does with good packets). If by chance the TCP flags are clobbered but not the addresses or ports, the result can be a broken TCP stream. The fix is to track the number of freed packets in a single location (a Fetch-and-Add Unit register). That way it can never get out of sync with itself. We try to free up to MAX_SKB_TO_FREE (currently 10) buffers at a time. If fewer are available we adjust the free count with the difference. The action of claiming buffers to free is atomic so two threads cannot claim the same buffers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24Staging: octeon-ethernet: Convert to use net_device_ops.David Daney10-396/+390
Convert the driver to use net_device_ops as it is now mandatory. Also compensate for the removal of struct sk_buff's dst field. The changes are mostly mechanical, the content of ethernet-common.c was moved to ethernet.c and ethernet-common.{c,h} are removed. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24DMA: txx9dmac: use dma_unmap_single if DMA_COMPL_{SRC,DEST}_UNMAP_SINGLE setAtsushi Nemoto1-8/+12
This patch does not change actual behaviour since dma_unmap_page is just an alias of dma_unmap_single on MIPS. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds27-415/+3377
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (48 commits) dm mpath: change to be request based dm: disable interrupt when taking map_lock dm: do not set QUEUE_ORDERED_DRAIN if request based dm: enable request based option dm: prepare for request based option dm raid1: add userspace log dm: calculate queue limits during resume not load dm log: fix create_log_context to use logical_block_size of log device dm target:s introduce iterate devices fn dm table: establish queue limits by copying table limits dm table: replace struct io_restrictions with struct queue_limits dm table: validate device logical_block_size dm table: ensure targets are aligned to logical_block_size dm ioctl: support cookies for udev dm: sysfs add suspended attribute dm table: improve warning message when devices not freed before destruction dm mpath: add service time load balancer dm mpath: add queue length load balancer dm mpath: add start_io and nr_bytes to path selectors dm snapshot: use barrier when writing exception store ...
2009-06-24Merge branch 'for-upstream' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: allow WLP to be used with IPv6. uwb: event_size should be signed
2009-06-24Merge branch 'release' of ↵Linus Torvalds28-930/+1755
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (72 commits) asus-laptop: remove EXPERIMENTAL dependency asus-laptop: use pr_fmt and pr_<level> eeepc-laptop: cpufv updates eeepc-laptop: sync eeepc-laptop with asus_acpi asus_acpi: Deprecate in favor of asus-laptop acpi4asus: update MAINTAINER and KConfig links asus-laptop: platform dev as parent for led and backlight eeepc-laptop: enable camera by default ACPI: Rename ACPI processor device bus ID acerhdf: Acer Aspire One fan control ACPI: video: DMI workaround broken Acer 7720 BIOS enabling display brightness ACPI: run ACPI device hot removal in kacpi_hotplug_wq ACPI: Add the reference count to avoid unloading ACPI video bus twice ACPI: DMI to disable Vista compatibility on some Sony laptops ACPI: fix a deadlock in hotplug case Show the physical device node of backlight class device. ACPI: pdc init related memory leak with physical CPU hotplug ACPI: pci_root: remove unused dev/fn information ACPI: pci_root: simplify list traversals ACPI: pci_root: use driver data rather than list lookup ...
2009-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds6-21/+42
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: bnx2: Fix the behavior of ethtool when ONBOOT=no qla3xxx: Don't sleep while holding lock. qla3xxx: Give the PHY time to come out of reset. ipv4 routing: Ensure that route cache entries are usable and reclaimable with caching is off net: Move rx skb_orphan call to where needed ipv6: Use correct data types for ICMPv6 type and code net: let KS8842 driver depend on HAS_IOMEM can: let SJA1000 driver depend on HAS_IOMEM netxen: fix firmware init handshake netxen: fix build with without CONFIG_PM netfilter: xt_rateest: fix comparison with self netfilter: xt_quota: fix incomplete initialization netfilter: nf_log: fix direct userspace memory access in proc handler netfilter: fix some sparse endianess warnings netfilter: nf_conntrack: fix conntrack lookup race netfilter: nf_conntrack: fix confirmation race condition netfilter: nf_conntrack: death_by_timeout() fix
2009-06-24Remove low_latency flag setting from nozomi and mxser driversChuck Ebbert2-4/+0
The kernel oopses if this flag is set. [and neither driver should set it as they call tty_flip_buffer_push from IRQ paths so have always been buggy] Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24tty: fix tty_port_block_til_ready waitingJiri Slaby1-1/+1
Since commit 3e3b5c087799e536871c8261b05bc28e4783c8da ("tty: use prepare/finish_wait"), tty_port_block_til_ready() is using prepare_to_wait()/finish_wait(). Those functions require that the wait_queue_t be initialised with .func=autoremove_wake_function, via DEFINE_WAIT(). But the conversion from DECLARE_WAITQUEUE() to DEFINE_WAIT() was not made, so this code will oops in finish_wait(). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24pci: use pci_ioremap_bar() in drivers/serialArjan van de Ven2-6/+3
Use the newly introduced pci_ioremap_bar() function in drivers/serial. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24synclink_gt: fix transmit race and timeoutPaul Fulghum1-42/+30
Fix race condition when adding transmit data to active DMA buffer ring that can cause transmit stall. Update transmit timeout when adding data to active DMA buffer ring. Base transmit timeout on amount of buffered data instead of using fixed value. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24jsm: clean up "serial: jsm: correctly support 4 8 port boards"Andrew Morton1-2/+2
Remove unneeded casts. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24kgdb: kgdboc console poll hooks for serial_txx9 uartAtsushi Nemoto1-21/+92
Implement the serial polling hooks for the serial_txx9 uart for use with kgdboc. This patch once got SOB from Jason on Jul 2008 and (perhaps) merged into kgdb-next branch, but lost somewhere then. I resend it now with Jason's Acked-by. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24bnx2: Fix the behavior of ethtool when ONBOOT=noOoiwa Naohiro1-1/+9
I found a little bug. When configure in ifcfg-eth* is ONBOOT=no, the behavior of ethtool command is wrong. # grep ONBOOT /etc/sysconfig/network-scripts/ifcfg-eth2 ONBOOT=no # ethtool eth2 | tail -n1 Link detected: yes I think "Link detected" should be "no". Signed-off-by: Ooiwa Naohiro <nooiwa@miraclelinux.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24asus-laptop: remove EXPERIMENTAL dependencyCorentin Chary1-1/+1
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24asus-laptop: use pr_fmt and pr_<level>Corentin Chary1-24/+26
Convert the unusual printk(ASUS_<level> uses to the more standard pr_fmt and pr_<level>(. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24eeepc-laptop: cpufv updatesCorentin Chary1-1/+76
Limit cpufv input to acceptables values. Add an available_cpufv file to show available presets. Change cpufv ouput format from %d to %#x, it won't break compatibility with existing userspace tools, but it provide a more human readable output. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24eeepc-laptop: sync eeepc-laptop with asus_acpiCorentin Chary1-4/+15
In the default Eee PC distribution, there is a modified asus_acpi driver. eeepc-laptop is a cleaned version of this driver. Sync ASL enum and getter/setters with asus_acpi. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24asus_acpi: Deprecate in favor of asus-laptopCorentin Chary1-2/+2
asus-laptop have been merged in the kernel two years ago, it is now stable and used by most distribution instead of the old asus_acpi driver. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24acpi4asus: update MAINTAINER and KConfig linksCorentin Chary1-4/+7
The bug tracker have moved from sourceforge to http://dev.iksaif.net . The homepage of the project is now http://acpi4asus.sf.net with links to the new bug tracker. No change for the mailing list. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24asus-laptop: platform dev as parent for led and backlightCorentin Chary1-21/+19
Makes asus-laptop platform device the parent device of backlight and led classes. With this patch, leds and backlight are also available in /sys/devices/platform/asus-laptop/ like thinkpad_acpi. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24eeepc-laptop: enable camera by defaultPekka Enberg1-0/+12
If we leave the camera disabled by default, userspace programs (e.g. Skype, Cheese) leave the user out in the cold saying that the machine "has no camera." Therefore, it's better to enable camera by default and let people who really don't want it just disable the thing. To reduce power usage you should enable USB autosuspend: echo -n auto > /sys/bus/usb/drivers/uvcvideo/*:*/../power/level Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge branch 'bjorn-notify' into releaseLen Brown6-153/+63
Conflicts: drivers/platform/x86/eeepc-laptop.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', ↵Len Brown22-721/+1535
'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
2009-06-24ACPI: Rename ACPI processor device bus IDZhao Yakui1-1/+10
Some BIOS re-use the same processor bus id in different scope: \_SB.SCK0.CPU0 \_SB.SCK1.CPU0 But the (deprecated) /proc/acpi/ interface assumes the bus-id's are unique, resulting in an OOPS when the processor driver is loaded: WARNING: at fs/proc/generic.c:590 proc_register+0x148/0x180() Hardware name: Sunrise Ridge proc_dir_entry 'processor/CPU0' already registered Call Trace: [<ffffffff8023f7ef>] warn_slowpath+0xb1/0xe5 [<ffffffff8036243b>] ? ida_get_new_above+0x190/0x1b1 [<ffffffff803625a8>] ? idr_pre_get+0x5f/0x75 [<ffffffff8030b2f6>] proc_register+0x148/0x180 [<ffffffff8030b4ff>] proc_mkdir_mode+0x3d/0x52 [<ffffffff8030b525>] proc_mkdir+0x11/0x13 [<ffffffffa0014b89>] acpi_processor_start+0x755/0x9bc [processor] Rename the processor device bus id. And the new bus id will be generated as the following format: CPU+ CPU ID For example: If the cpu ID is 5, then the bus ID will be "CPU5". If the CPU ID is 10, then the bus ID will be "CPUA". Yes, this will change the directory names seen in /proc/acpi/processor/* on some systems. Before this patch, those directory names where totally arbitrary strings based on the interal AML device strings. http://bugzilla.kernel.org/show_bug.cgi?id=13612 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24acerhdf: Acer Aspire One fan controlPeter Feuerer3-0/+620
Acerhdf is a driver for Acer Aspire One netbooks. It allows to access the temperature sensor and to control the fan. Signed-off-by: Peter Feuerer <peter@piie.net> Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: video: DMI workaround broken Acer 7720 BIOS enabling display brightnessZhang Rui1-0/+8
http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: run ACPI device hot removal in kacpi_hotplug_wqZhang Rui1-12/+8
Now that new interface is available, convert to using it rather than creating a new kernel thread. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: Add the reference count to avoid unloading ACPI video bus twiceZhao Yakui2-7/+36
Sometimes both acpi video and i915 driver are compiled as modules. And there exists the strict dependency between the two drivers. The acpi video bus will be unloaded in course of unloading the i915 driver. If we unload the acpi video driver, then the kernel oops will be triggered. Add the reference count to avoid unloading the ACPI video bus twice. The reference count should be checked before unregistering the acpi video bus. If the reference count is already zero, it won't unregister it again. And after the acpi video bus is already unregistered, the reference count will be set to zero. http://bugzilla.kernel.org/show_bug.cgi?id=13396 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: DMI to disable Vista compatibility on some Sony laptopsZhang Rui1-0/+16
Linux claims Vista compatibility to the BIOS for a number of reasons, but this brings hard lockup on some Sony laptops. Disable Vista compatibility via DMI for these laptops unless we can figure out what Vista is doing for this platform. http://bugzilla.kernel.org/show_bug.cgi?id=12904 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: fix a deadlock in hotplug caseZhang Rui1-9/+16
we used to run the hotplug code in keventd_wq. But when hot removing the ACPI battery device, power_supply_unregister invokes flush_scheduled_work. This causes a deadlock. i.e 1. When dock is unplugged, all the hotplug code is run on kevent_wq. 2. the hotplug code removes all the child devices of dock device. 3. removing the child device may invoke flush_scheduled_work 4. flush_scheduled_work waits until all the work on kevent_wq to be finished, while this will never be true because the hotplug code is running on keventd_wq... Introduce a new workqueue for hotplug in this patch. http://bugzilla.kernel.org/show_bug.cgi?id=13533 Tested-by: Paul Martin <pm@debian.org> Tested-by: Vojtech Gondzala <vojtech.gondzala@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Show the physical device node of backlight class device.Zhang Rui1-0/+6
Create symbol link from backlight class device to ACPI video device. More and more laptops are shipped with multiple ACPI video devices, while we export only one of them to userspace. With this patch applied, we can know which ACPI video device is used by "cat /sys/class/backlight/acpi_video0/device/path". Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge git://git.infradead.org/iommu-2.6Linus Torvalds3-77/+399
* git://git.infradead.org/iommu-2.6: Intel-IOMMU, intr-remap: source-id checking Intel-IOMMU, intr-remap: set the whole 128bits of irte when modify/free it IOMMU Identity Mapping Support (drivers/pci/intel_iommu.c)
2009-06-24Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds3-0/+634
* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: driver for the Synopsys DesignWare I2C controller
2009-06-24qla3xxx: Don't sleep while holding lock.Ron Mercer1-0/+3
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24qla3xxx: Give the PHY time to come out of reset.Ron Mercer1-1/+2
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24i2c: driver for the Synopsys DesignWare I2C controllerBaruch Siach3-0/+634
The i2c Linux driver for the DesignWare i2c block of Synopsys, which is meant for AMBA Peripheral Bus. This i2c block is used on SoC chips like the ARM9 based PVG610. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-24Intel-IOMMU, intr-remap: source-id checkingWeidong Han2-3/+119
To support domain-isolation usages, the platform hardware must be capable of uniquely identifying the requestor (source-id) for each interrupt message. Without source-id checking for interrupt remapping , a rouge guest/VM with assigned devices can launch interrupt attacks to bring down anothe guest/VM or the VMM itself. This patch adds source-id checking for interrupt remapping, and then really isolates interrupts for guests/VMs with assigned devices. Because PCI subsystem is not initialized yet when set up IOAPIC entries, use read_pci_config_byte to access PCI config space directly. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-24Intel-IOMMU, intr-remap: set the whole 128bits of irte when modify/free itWeidong Han1-14/+26
Interrupt remapping table entry is 128bits. Currently, it only sets low 64bits of irte in modify_irte and free_irte. This ignores high 64bits setting of irte, that means source-id setting will be ignored. This patch sets the whole 128bits of irte when modify/free it. Following source-id checking patch depends on this. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-24IOMMU Identity Mapping Support (drivers/pci/intel_iommu.c)Fenghua Yu1-60/+254
Identity mapping for IOMMU defines a single domain to 1:1 map all PCI devices to all usable memory. This reduces map/unmap overhead in DMA API's and improve IOMMU performance. On 10Gb network cards, Netperf shows no performance degradation compared to non-IOMMU performance. This method may lose some of DMA remapping benefits like isolation. The patch sets up identity mapping for all PCI devices to all usable memory. In the DMA API, there is no overhead to maintain page tables, invalidate iotlb, flush cache etc. 32 bit DMA devices don't use identity mapping domain, in order to access memory beyond 4GiB. When kernel option iommu=pt, pass through is first tried. If pass through succeeds, IOMMU goes to pass through. If pass through is not supported in hw or fail for whatever reason, IOMMU goes to identity mapping. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-23nvidiafb: fix boot-time printk stringMikael Pettersson1-2/+1
On bootup nvidiafb prints the following on my Apple G5: nvidiafb: CRTC 1appears to have a CRT attached There should be a space between the '1' and the 'appears'. Add it. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23Merge branch 'for-linus' of ↵Linus Torvalds10-34/+554
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Add __init/__exit macros to addr.c and cma.c IB/ehca: Bump version number mlx4_core: Fix dma_sync_single_for_cpu() with matching for_device() calls IB/mthca: Replace dma_sync_single() use with proper functions RDMA/nes: Fix FIN state handling under error conditions RDMA/nes: Fix max_qp_init_rd_atom returned from query device IB/ehca: Ensure that guid_entry index is not negative IB/ehca: Tolerate dynamic memory operations before driver load
2009-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds41-588/+1174
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (38 commits) fusion: mptsas, fix lock imbalance [SCSI] scsi_transport_fc: replace BUS_ID_SIZE by fixed count sd, sr: fix Driver 'sd' needs updating message scsi_transport_iscsi: return -EOVERFLOW for Too many iscsi targets fc_transport: Selective return value from BSG timeout function fc_transport: The softirq_done function registration for BSG request sym53c8xx: ratelimit parity errors explain the hidden scsi_wait_scan Kconfig variable ibmvfc: Fix endless PRLI loop in discovery ibmvfc: Process async events before command responses libfc: Add runtime debugging with debug_logging module parameter libfcoe: Add runtime debugging with module param debug_logging fcoe: Add runtime debug logging with module parameter debug_logging scsi_debug: Add support for physical block exponent and alignment cnic: add NETDEV_1000 and NETDEVICES to Kconfig select cnic: Fix __symbol_get() build error. Revert "[SCSI] cnic: fix error: implicit declaration of function ‘__symbol_get’" ipr: differentiate pci-x and pci-e based adapters ipr: add test for MSI interrupt support scsi_transport_spi: Blacklist Ultrium-3 tape for IU transfers ...
2009-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds11-79/+1825
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] wdt_pci.c: remove #ifdef CONFIG_WDT_501_PCI [WATCHDOG] hpwdt: Add NMI priority option [WATCHDOG] OMAP fixes: enable clock in probe, trigger timer reload [WATCHDOG] add bcm47xx watchdog driver [WATCHDOG] Freescale STMP: watchdog driver [WATCHDOG] twl4030 watchdog driver [WATCHDOG] U300 COH 901 327 watchdog driver [WATCHDOG] Add pnx833x_wdt
2009-06-23Merge branch 'for_linus' of ↵Linus Torvalds51-483/+2253
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (62 commits) V4L/DVB (12131): BUGFIX: An incorrect Carrier Recovery Loop optimization table was being V4L/DVB (12130): Fix a redundant compiler warning V4L/DVB (12003): v4l2: Move bounding code outside I2C ifdef block V4L/DVB (11913): cx231xx: TRY_FMT should not actually set anything V4L/DVB (11912): em28xx: Use v4l bounding/alignment function V4L/DVB (11911): cx231xx: Use v4l bounding/alignment function V4L/DVB (11910): mt9: Use v4l bounding/alignment function V4L/DVB (11909): cx23885: Use v4l bounding/alignment function V4L/DVB (11908): w8968cf: Use v4l bounding/alignment function V4L/DVB (11907): cx88: Use v4l bounding/alignment function V4L/DVB (11906): saa7134: Use v4l bounding/alignment function V4L/DVB (11905): vivi: Use v4l bounding/alignment function V4L/DVB (11904): zoran: Use v4l bounding/alignment functiob V4L/DVB (11903): sh_mobile_ceu_camera: Use v4l bounding/alignment function V4L/DVB (11902): pxa-camera: Use v4l bounding/alignment function V4L/DVB (11901): v4l2: Create helper function for bounding and aligning images V4L/DVB (12128): v4l2: update framework documentation. V4L/DVB (12125): v4l2: add new s_config subdev ops and v4l2_i2c_new_subdev_cfg/board calls V4L/DVB (12122): pvrusb2: De-obfuscate code which handles routing schemes V4L/DVB (12121): pvrusb2: Improve handling of routing schemes ...
2009-06-23Merge branch 'upstream-linus' of ↵Linus Torvalds5-10/+420
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: don't set IORDY for reset sata_fsl: Add power mgmt support [libata] PATA driver for CF interface on AT91SAM9260 SoC [libata] beautify module parameters
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-16 09:57:21 +0300