summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-10-01Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devicesJian-Hong Pan1-0/+3
[ Upstream commit 6d0762b19c5963ff9e178e8af3626532ee04d93d ] The ASUS X412FA laptop contains a Realtek RTL8822CE device with an associated BT chip using a USB ID of 04ca:4005. This ID is added to the driver. The /sys/kernel/debug/usb/devices portion for this device is: T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=4005 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01drm/nouveau/disp/nv50-: fix center/aspect-corrected scalingIlia Mirkin1-4/+24
[ Upstream commit 533f4752407543f488a9118d817b8c504352b6fb ] Previously center scaling would get scaling applied to it (when it was only supposed to center the image), and aspect-corrected scaling did not always correctly pick whether to reduce width or height for a particular combination of inputs/outputs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35Hans de Goede1-0/+37
[ Upstream commit 4f7f96453b462b3de0fa18d18fe983960bb5ee7f ] Some machines change the brightness themselves when a brightness hotkey gets pressed, despite us telling them not to. This causes the brightness to go two steps up / down when the hotkey is pressed. This is esp. a problem on older machines with only a few brightness levels. This commit adds a new hw_changes_brightness quirk which makes acpi_video_device_notify() only call backlight_force_update(..., BACKLIGHT_UPDATE_HOTKEY) and not do anything else, notifying userspace that the brightness was changed and leaving it at that fixing the dual step problem. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204077 Reported-by: Kacper Piwiński <cosiekvfj@o2.pl> Tested-by: Kacper Piwiński <cosiekvfj@o2.pl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01Bluetooth: btrtl: HCI reset on close for Realtek BT chipJian-Hong Pan3-0/+27
[ Upstream commit 7af3f558aca74f2ee47b173f1c27f6bb9a5b5561 ] Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly after on-off several times. Bluetooth daemon sets BT mode failed when this issue happens. Scanning must be active while turning off for this bug to be hit. bluetoothd[1576]: Failed to set mode: Failed (0x03) If BT is turned off, then turned on again, it works correctly again. According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set during probing. So, this patch makes Realtek's BT reset on close to fix this issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01drm/dp: Add DP_DPCD_QUIRK_NO_SINK_COUNTVille Syrjälä1-1/+3
[ Upstream commit 7974033e527a5dd12d96126d09d4cff4f9b65c69 ] CH7511 eDP->LVDS bridge doesn't seem to set SINK_COUNT properly causing i915 to detect it as disconnected. Add a quirk to ignore SINK_COUNT on these devices. Cc: David S. <david@majinbuu.com> Cc: Peteris Rudzusiks <peteris.rudzusiks@gmail.com> Tested-by: Peteris Rudzusiks <peteris.rudzusiks@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105406 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528140650.19230-1-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com> #irc Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01drm: Flush output polling on shutdownChris Wilson1-1/+8
[ Upstream commit 3b295cb1a411d9c82bbfaa66bc17a8508716ed07 ] We need to mark the output polling as disabled to prevent concurrent irqs from queuing new work as shutdown the probe -- causing that work to execute after we have freed the structs: <4> [341.846490] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) <4> [341.846497] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50 <4> [341.846508] Modules linked in: i915(-) vgem thunderbolt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mcs7830 btusb usbnet btrtl mii btbcm btintel bluetooth ecdh_generic ecc mei_me mei prime_numbers i2c_hid pinctrl_sunrisepoint pinctrl_intel [last unloaded: i915] <4> [341.846546] CPU: 3 PID: 3300 Comm: i915_module_loa Tainted: G U 5.2.0-rc2-CI-CI_DRM_6175+ #1 <4> [341.846553] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4> [341.846560] RIP: 0010:mutex_destroy+0x49/0x50 <4> [341.846565] Code: 00 00 5b c3 e8 a8 9f 3b 00 85 c0 74 ed 8b 05 3e 55 23 01 85 c0 75 e3 48 c7 c6 00 d0 08 82 48 c7 c7 a8 aa 07 82 e8 e7 08 fa ff <0f> 0b eb cc 0f 1f 00 48 b8 11 11 11 11 11 11 11 11 48 89 76 20 48 <4> [341.846578] RSP: 0018:ffffc900006cfdb0 EFLAGS: 00010286 <4> [341.846583] RAX: 0000000000000000 RBX: ffff88826759a168 RCX: 0000000000000000 <4> [341.846589] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffffff8112844c <4> [341.846595] RBP: ffff8882708fa548 R08: 0000000000000000 R09: 0000000000039600 <4> [341.846601] R10: 0000000000000000 R11: 0000000000000ce4 R12: ffffffffa07de1e0 <4> [341.846607] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffa07de2d0 <4> [341.846613] FS: 00007f62b5ae0e40(0000) GS:ffff888276380000(0000) knlGS:0000000000000000 <4> [341.846620] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [341.846626] CR2: 000055a4e064f4a0 CR3: 0000000266b16006 CR4: 00000000003606e0 <4> [341.846632] Call Trace: <4> [341.846639] drm_fb_helper_fini.part.17+0xb3/0x100 <4> [341.846682] intel_fbdev_fini+0x20/0x80 [i915] <4> [341.846722] intel_modeset_cleanup+0x9a/0x140 [i915] <4> [341.846750] i915_driver_unload+0xa3/0x100 [i915] <4> [341.846778] i915_pci_remove+0x19/0x30 [i915] <4> [341.846784] pci_device_remove+0x36/0xb0 <4> [341.846790] device_release_driver_internal+0xd3/0x1b0 <4> [341.846795] driver_detach+0x3f/0x80 <4> [341.846800] bus_remove_driver+0x53/0xd0 <4> [341.846805] pci_unregister_driver+0x25/0xa0 <4> [341.846843] i915_exit+0x16/0x1c [i915] <4> [341.846849] __se_sys_delete_module+0x162/0x210 <4> [341.846855] ? trace_hardirqs_off_thunk+0x1a/0x1c <4> [341.846859] ? do_syscall_64+0xd/0x1c0 <4> [341.846864] do_syscall_64+0x55/0x1c0 <4> [341.846869] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [341.846875] RIP: 0033:0x7f62b51871b7 <4> [341.846881] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 <4> [341.846897] RSP: 002b:00007ffe7a227138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 <4> [341.846904] RAX: ffffffffffffffda RBX: 00007ffe7a2272b0 RCX: 00007f62b51871b7 <4> [341.846910] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000557cd6b55948 <4> [341.846916] RBP: 0000557cd6b558e0 R08: 0000557cd6b5594c R09: 00007ffe7a227160 <4> [341.846922] R10: 00007ffe7a226134 R11: 0000000000000206 R12: 0000000000000000 <4> [341.846927] R13: 00007ffe7a227820 R14: 0000000000000000 R15: 0000000000000000 <4> [341.846936] irq event stamp: 3547847 <4> [341.846940] hardirqs last enabled at (3547847): [<ffffffff819aad2c>] _raw_spin_unlock_irqrestore+0x4c/0x60 <4> [341.846949] hardirqs last disabled at (3547846): [<ffffffff819aab9d>] _raw_spin_lock_irqsave+0xd/0x50 <4> [341.846957] softirqs last enabled at (3547376): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9 <4> [341.846966] softirqs last disabled at (3547367): [<ffffffff810b6379>] irq_exit+0xa9/0xc0 <4> [341.846973] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50 <4> [341.846980] ---[ end trace ba94ca8952ba970e ]--- <7> [341.866547] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes <7> [341.890480] [drm:drm_add_display_info] non_desktop set to 0 <7> [341.890530] [drm:drm_add_edid_modes] ELD: no CEA Extension found <7> [341.890537] [drm:drm_add_display_info] non_desktop set to 0 <7> [341.890578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes : <7> [341.890589] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [341.890602] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <4> [341.890628] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [341.890636] CPU: 0 PID: 508 Comm: kworker/0:4 Tainted: G U W 5.2.0-rc2-CI-CI_DRM_6175+ #1 <4> [341.890646] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4> [341.890655] Workqueue: events output_poll_execute <4> [341.890663] RIP: 0010:drm_setup_crtcs+0x13e/0xbe0 <4> [341.890669] Code: 00 41 8b 44 24 58 85 c0 0f 8e f9 01 00 00 44 8b 6c 24 20 44 8b 74 24 28 31 db 31 ed 49 8b 44 24 60 48 63 d5 44 89 ee 83 c5 01 <48> 8b 04 d0 44 89 f2 48 8b 38 48 8b 87 88 01 00 00 48 8b 40 20 e8 <4> [341.890686] RSP: 0018:ffffc9000033fd40 EFLAGS: 00010202 <4> [341.890692] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000000 <4> [341.890700] RDX: 0000000000000001 RSI: 0000000000000c80 RDI: 00000000ffffffff <4> [341.890707] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 <4> [341.890715] R10: 0000000000000c80 R11: 0000000000000000 R12: ffff888267599fe8 <4> [341.890722] R13: 0000000000000c80 R14: 0000000000000708 R15: 0000000000000007 <4> [341.890730] FS: 0000000000000000(0000) GS:ffff888276200000(0000) knlGS:0000000000000000 <4> [341.890739] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [341.890745] CR2: 000055a4e064f4a0 CR3: 000000026d234003 CR4: 00000000003606f0 <4> [341.890752] Call Trace: <4> [341.890760] drm_fb_helper_hotplug_event.part.24+0x89/0xb0 <4> [341.890768] drm_kms_helper_hotplug_event+0x21/0x30 <4> [341.890774] output_poll_execute+0x9d/0x1a0 <4> [341.890782] process_one_work+0x245/0x610 <4> [341.890790] worker_thread+0x37/0x380 <4> [341.890796] ? process_one_work+0x610/0x610 <4> [341.890802] kthread+0x119/0x130 <4> [341.890808] ? kthread_park+0x80/0x80 <4> [341.890815] ret_from_fork+0x3a/0x50 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109964 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603135910.15979-2-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01net/ibmvnic: Fix missing { in __ibmvnic_resetMichal Suchanek1-1/+1
[ Upstream commit c8dc55956b09b53ccffceb6e3146981210e27821 ] Commit 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue") adds a } without corresponding { causing build break. Fixes: 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Reviewed-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01dm zoned: fix invalid memory accessMikulas Patocka1-2/+0
[ Upstream commit 0c8e9c2d668278652af028c3cc068c65f66342f4 ] Commit 75d66ffb48efb30f2dd42f041ba8b39c5b2bd115 ("dm zoned: properly handle backing device failure") triggers a coverity warning: *** CID 1452808: Memory - illegal accesses (USE_AFTER_FREE) /drivers/md/dm-zoned-target.c: 137 in dmz_submit_bio() 131 clone->bi_private = bioctx; 132 133 bio_advance(bio, clone->bi_iter.bi_size); 134 135 refcount_inc(&bioctx->ref); 136 generic_make_request(clone); >>> CID 1452808: Memory - illegal accesses (USE_AFTER_FREE) >>> Dereferencing freed pointer "clone". 137 if (clone->bi_status == BLK_STS_IOERR) 138 return -EIO; 139 140 if (bio_op(bio) == REQ_OP_WRITE && dmz_is_seq(zone)) 141 zone->wp_block += nr_blocks; 142 The "clone" bio may be processed and freed before the check "clone->bi_status == BLK_STS_IOERR" - so this check can access invalid memory. Fixes: 75d66ffb48efb3 ("dm zoned: properly handle backing device failure") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01platform/x86: i2c-multi-instantiate: Derive the device name from parentHeikki Krogerus1-1/+1
commit 24a8d78a9affb63e5ced313ccde6888fe96edc6e upstream. When naming the new devices, instead of using the ACPI ID in the name as base, using the parent device's name. That makes it possible to support multiple multi-instance i2c devices of the same type in the same system. This fixes an issue seen on some Intel Kaby Lake based boards: sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-INT3515-tps6598x.0' Fixes: 2336dfadfb1e ("platform/x86: i2c-multi-instantiate: Allow to have same slaves") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01Revert "HID: logitech-hidpp: add USB PID for a few more supported mice"Benjamin Tissoires1-20/+0
commit addf3382c47c033e579c9c88f18e36c4e75d806a upstream. This partially reverts commit 27fc32fd9417968a459d43d9a7c50fd423d53eb9. It turns out that the G502 has some issues with hid-logitech-hidpp: when plugging it in, the driver tries to contact it but it fails. So the driver bails out leaving only the mouse event node available. This timeout is problematic as it introduce a delay in the boot, and having only the mouse event node means that the hardware macros keys can not be relayed to the userspace. Filipe and I just gave a shot at the following devices: G403 Wireless (0xC082) G703 (0xC087) G703 Hero (0xC090) G903 (0xC086) G903 Hero (0xC091) G Pro (0xC088) Reverting the devices we are not sure that works flawlessly. Reviewed-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01clk: imx: imx8mm: fix audio pll settingPeng Fan1-2/+2
commit 053a4ffe298836bb973d2cba59f82fff60c7db5b upstream. The AUDIO PLL max support 650M, so the original clk settings violate spec. This patch makes the output 786432000 -> 393216000, and 722534400 -> 361267200 to aligned with NXP vendor kernel without any impact on audio functionality and go within 650MHz PLL limit. Cc: <stable@vger.kernel.org> Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01crypto: talitos - fix missing break in switch statementGustavo A. R. Silva1-0/+1
commit 5fc194ea6d34dfad9833d3043ce41d6c52aff39a upstream. Add missing break statement in order to prevent the code from falling through to case CRYPTO_ALG_TYPE_AHASH. Fixes: aeb4c132f33d ("crypto: talitos - Convert to new AEAD interface") Cc: stable@vger.kernel.org Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()Tokunori Ikegami1-6/+12
commit 37c673ade35c707d50583b5b25091ff8ebdeafd7 upstream. As reported by the OpenWRT team, write requests sometimes fail on some platforms. Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet. Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error checking"). But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command. By using chip_good() to check the state to be done it can be reduced the retry with reset. It is depended on the actual flash chip behavior so the root cause is unknown. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Reported-by: Fabio Bettoni <fbettoni@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Fix a checkpatch warning] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01HID: Add quirk for HP X500 PIXART OEM mouseSebastian Parschauer2-0/+2
commit 2acf40f0454d41b8d51c95d317283c20c931164d upstream. The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. Ville Viinikka (viinikv) reported and tested the quirk. Link: https://github.com/sriemer/fix-linux-mouse issue 15 Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org # v4.16+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01HID: hidraw: Fix invalid read in hidraw_ioctlAlan Stern1-1/+1
commit 416dacb819f59180e4d86a5550052033ebb6d72c upstream. The syzbot fuzzer has reported a pair of problems in the hidraw_ioctl() function: slab-out-of-bounds read and use-after-free read. An example of the first: BUG: KASAN: slab-out-of-bounds in strlen+0x79/0x90 lib/string.c:525 Read of size 1 at addr ffff8881c8035f38 by task syz-executor.4/2833 CPU: 1 PID: 2833 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 strlen+0x79/0x90 lib/string.c:525 strlen include/linux/string.h:281 [inline] hidraw_ioctl+0x245/0xae0 drivers/hid/hidraw.c:446 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd2d/0x1330 fs/ioctl.c:696 ksys_ioctl+0x9b/0xc0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718 do_syscall_64+0xb7/0x580 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7a68f6dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000080404805 RDI: 0000000000000004 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a68f6e6d4 R13: 00000000004c21de R14: 00000000004d5620 R15: 00000000ffffffff The two problems have the same cause: hidraw_ioctl() fails to test whether the device has been removed. This patch adds the missing test. Reported-and-tested-by: syzbot+5a6c4ec678a0c6ee84ba@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01HID: logitech-dj: Fix crash when initial logi_dj_recv_query_paired_devices failsHans de Goede1-5/+5
commit 8ccff2843fb4e6d9d26e5ae9ffe9840b38b92638 upstream. Before this commit dj_probe would exit with an error if the initial logi_dj_recv_query_paired_devices fails. The initial call may fail when the receiver is connected through a kvm and the focus is away. When the call fails this causes 2 problems: 1) dj_probe calls logi_dj_recv_query_paired_devices after calling hid_device_io_start() so a HID report may have been received in between and our delayedwork_callback may be running. It seems that the initial logi_dj_recv_query_paired_devices failure happening with some KVMs triggers this exact scenario, causing the work-queue to run on free-ed memory, leading to: BUG: unable to handle page fault for address: 0000000000001e88 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 257 Comm: kworker/3:3 Tainted: G OE 5.3.0-rc5+ #100 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B150M Pro4S/D3, BIOS P7.10 12/06/2016 Workqueue: events 0xffffffffc02ba200 RIP: 0010:0xffffffffc02ba1bd Code: e8 e8 13 00 d8 48 89 c5 48 85 c0 74 4c 48 8b 7b 10 48 89 ea b9 07 00 00 00 41 b9 09 00 00 00 41 b8 01 00 00 00 be 10 00 00 00 <48> 8b 87 88 1e 00 00 48 8b 40 40 e8 b3 6b b4 d8 48 89 ef 41 89 c4 RSP: 0018:ffffb760c046bdb8 EFLAGS: 00010286 RAX: ffff935038ea4550 RBX: ffff935046778000 RCX: 0000000000000007 RDX: ffff935038ea4550 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff935038ea4550 R08: 0000000000000001 R09: 0000000000000009 R10: 000000000000e011 R11: 0000000000000001 R12: ffff9350467780e8 R13: ffff935046778000 R14: 0000000000000000 R15: ffff935046778070 FS: 0000000000000000(0000) GS:ffff935054e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001e88 CR3: 000000075a612002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: 0xffffffffc02ba2f7 ? process_one_work+0x1b1/0x560 process_one_work+0x234/0x560 worker_thread+0x50/0x3b0 kthread+0x10a/0x140 ? process_one_work+0x560/0x560 ? kthread_park+0x80/0x80 ret_from_fork+0x3a/0x50 Modules linked in: vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep vfat fat btusb btrtl btbcm btintel bluetooth intel_rapl_msr ecdh_generic rfkill ecc snd_usb_audio snd_usbmidi_lib intel_rapl_common snd_rawmidi mc x86_pkg_temp_thermal intel_powerclamp coretemp iTCO_wdt iTCO_vendor_support mei_wdt mei_hdcp ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_generic crc32_pclmul snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio ghash_clmulni_intel intel_cstate snd_hda_intel snd_hda_codec intel_uncore snd_hda_core snd_hwdep intel_rapl_perf snd_seq snd_seq_device snd_pcm snd_timer intel_wmi_thunderbolt snd e1000e soundcore mxm_wmi i2c_i801 bfq mei_me mei intel_pch_thermal parport_pc parport acpi_pad binfmt_misc hid_lg_g15(E) hid_logitech_dj(E) i915 crc32c_intel i2c_algo_bit drm_kms_helper nvme nvme_core drm wmi video uas usb_storage i2c_dev CR2: 0000000000001e88 ---[ end trace 1d3f8afdcfcbd842 ]--- 2) Even if we were to fix 1. by making sure the work is stopped before failing probe, failing probe is the wrong thing to do, we have logi_dj_recv_queue_unknown_work to deal with the initial logi_dj_recv_query_paired_devices failure. Rather then error-ing out of the probe, causing the receiver to not work at all we should rely on this, so that the attached devices will get properly enumerated once the KVM focus is switched back. Cc: stable@vger.kernel.org Fixes: 74808f9115ce ("HID: logitech-dj: add support for non unifying receivers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01HID: logitech: Fix general protection fault caused by Logitech driverAlan Stern2-5/+6
commit 5f9242775bb61f390f0885f23fc16397262c7538 upstream. The syzbot fuzzer found a general protection fault in the HID subsystem: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 3715 Comm: syz-executor.3 Not tainted 5.2.0-rc6+ #15 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__pm_runtime_resume+0x49/0x180 drivers/base/power/runtime.c:1069 Code: ed 74 d5 fe 45 85 ed 0f 85 9a 00 00 00 e8 6f 73 d5 fe 48 8d bd c1 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 fe 00 00 00 RSP: 0018:ffff8881d99d78e0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000020 RCX: ffffc90003f3f000 RDX: 0000000416d8686d RSI: ffffffff82676841 RDI: 00000020b6c3436a RBP: 00000020b6c340a9 R08: ffff8881c6d64800 R09: fffffbfff0e84c25 R10: ffff8881d99d7940 R11: ffffffff87426127 R12: 0000000000000004 R13: 0000000000000000 R14: ffff8881d9b94000 R15: ffffffff897f9048 FS: 00007f047f542700(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30f21000 CR3: 00000001ca032000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: pm_runtime_get_sync include/linux/pm_runtime.h:226 [inline] usb_autopm_get_interface+0x1b/0x50 drivers/usb/core/driver.c:1707 usbhid_power+0x7c/0xe0 drivers/hid/usbhid/hid-core.c:1234 hid_hw_power include/linux/hid.h:1038 [inline] hidraw_open+0x20d/0x740 drivers/hid/hidraw.c:282 chrdev_open+0x219/0x5c0 fs/char_dev.c:413 do_dentry_open+0x497/0x1040 fs/open.c:778 do_last fs/namei.c:3416 [inline] path_openat+0x1430/0x3ff0 fs/namei.c:3533 do_filp_open+0x1a1/0x280 fs/namei.c:3563 do_sys_open+0x3c0/0x580 fs/open.c:1070 do_syscall_64+0xb7/0x560 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe It turns out the fault was caused by a bug in the HID Logitech driver, which violates the requirement that every pathway calling hid_hw_start() must also call hid_hw_stop(). This patch fixes the bug by making sure the requirement is met. Reported-and-tested-by: syzbot+3cbe5cd105d2ad56a1df@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01HID: sony: Fix memory corruption issue on cleanup.Roderick Colenbrander1-1/+1
commit 2bcdacb70327013ca2066bfcf2af1009eff01f1d upstream. The sony driver is not properly cleaning up from potential failures in sony_input_configured. Currently it calls hid_hw_stop, while hid_connect is still running. This is not a good idea, instead hid_hw_stop should be moved to sony_probe. Similar changes were recently made to Logitech drivers, which were also doing improper cleanup. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01HID: prodikeys: Fix general protection fault during probeAlan Stern1-2/+10
commit 98375b86c79137416e9fd354177b85e768c16e56 upstream. The syzbot fuzzer provoked a general protection fault in the hid-prodikeys driver: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300 [inline] RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline] RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline] RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836 Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc 48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b The problem is caused by the fact that pcmidi_get_output_report() will return an error if the HID device doesn't provide the right sort of output report, but pcmidi_set_operational() doesn't bother to check the return code and assumes the function call always succeeds. This patch adds the missing check and aborts the probe operation if necessary. Reported-and-tested-by: syzbot+1088533649dafa1c9004@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01Revert "net: hns: fix LED configuration for marvell phy"David S. Miller1-22/+1
commit b3e487c0cf425369a48049251af75593a5652dc1 upstream. This reverts commit f4e5f775db5a4631300dccd0de5eafb50a77c131. Andrew Lunn says this should be handled another way. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to ↵Nick Desaulniers2-0/+8
undefined SW FP routines [ Upstream commit 0f0727d971f6fdf8f1077180d495ddb9928f0c8b ] arch/x86/Makefile disables SSE and SSE2 for the whole kernel. The AMDGPU drivers modified in this patch re-enable SSE but not SSE2. Turn on SSE2 to support emitting double precision floating point instructions rather than calls to non-existent (usually available from gcc_s or compiler_rt) floating point helper routines for Clang. This was originally landed in: commit 10117450735c ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines") but reverted in: commit 193392ed9f69 ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"") due to bugreports from GCC builds. Add guards to only do so for Clang. Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487 Link: https://github.com/ClangBuiltLinux/linux/issues/327 Suggested-by: Sedat Dilek <sedat.dilek@gmail.com> Suggested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01drm/amd/display: Don't replace the dc_state for fast updatesNicholas Kazlauskas1-0/+23
commit bd200d190f45b62c006d1ad0a63eeffd87db7a47 upstream. [Why] DRM private objects have no hw_done/flip_done fencing mechanism on their own and cannot be used to sequence commits accordingly. When issuing commits that don't touch the same set of hardware resources like page-flips on different CRTCs we can run into the issue below because of this: 1. Client requests non-blocking Commit #1, has a new dc_state #1, state is swapped, commit tail is deferred to work queue 2. Client requests non-blocking Commit #2, has a new dc_state #2, state is swapped, commit tail is deferred to work queue 3. Commit #2 work starts, commit tail finishes, atomic state is cleared, dc_state #1 is freed 4. Commit #1 work starts, commit tail encounters null pointer deref on dc_state #1 In order to change the DC state as in the private object we need to ensure that we wait for all outstanding commits to finish and that any other pending commits must wait for the current one to finish as well. We do this for MEDIUM and FULL updates. But not for FAST updates, nor would we want to since it would cause stuttering from the delays. FAST updates that go through dm_determine_update_type_for_commit always create a new dc_state and lock the DRM private object if there are any changed planes. We need the old state to validate, but we don't actually need the new state here. [How] If the commit isn't a full update then the use after free can be resolved by simply discarding the new state entirely and retaining the existing one instead. With this change the sequence above can be reexamined. Commit #2 will still free Commit #1's reference, but before this happens we actually added an additional reference as part of Commit #2. If an update comes in during this that needs to change the dc_state it will need to wait on Commit #1 and Commit #2 to finish. Then it'll swap the state, finish the work in commit tail and drop the last reference on Commit #2's dc_state. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204181 Fixes: 004b3938e637 ("drm/amd/display: Check scaling info when determing update type") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: David Francis <david.francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01drm/amd/display: Skip determining update type for async updatesNicholas Kazlauskas1-7/+20
commit 43d10d30df156f7834fa91aecb69614fefc8bb0a upstream. [Why] By passing through the dm_determine_update_type_for_commit for atomic commits that can be done asynchronously we are incurring a performance penalty by locking access to the global private object and holding that access until the end of the programming sequence. This is also allocating a new large dc_state on every access in addition to retaining all the references on each stream and plane until the end of the programming sequence. [How] Shift the determination for async update before validation. Return early if it's going to be an async update. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: David Francis <david.francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01drm/amd/display: Allow cursor async updates for framebuffer swapsNicholas Kazlauskas1-10/+0
commit e16e37efb4c9eb7bcb9dab756c975040c5257e98 upstream. [Why] We previously allowed framebuffer swaps as async updates for cursor planes but had to disable them due to a bug in DRM with async update handling and incorrect ref counting. The check to block framebuffer swaps has been added to DRM for a while now, so this check is redundant. The real fix that allows this to properly in DRM has also finally been merged and is getting backported into stable branches, so dropping this now seems to be the right time to do so. [How] Drop the redundant check for old_fb != new_fb. With the proper fix in DRM, this should also fix some cursor stuttering issues with xf86-video-amdgpu since it double buffers the cursor. IGT tests that swap framebuffers (-varying-size for example) should also pass again. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: David Francis <david.francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-01net/ibmvnic: free reset work of removed device from queueJuliet Kim1-2/+5
[ Upstream commit 1c2977c094998de032fee6e898c88b4a05483d08 ] Commit 36f1031c51a2 ("ibmvnic: Do not process reset during or after device removal") made the change to exit reset if the driver has been removed, but does not free reset work items of the adapter from queue. Ensure all reset work items are freed when breaking out of the loop early. Fixes: 36f1031c51a2 ("ibmnvic: Do not process reset during or after device removal”) Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01phy: qcom-qmp: Correct ready status, againBjorn Andersson1-17/+16
[ Upstream commit 14ced7e3a1ae9bed7051df3718c8c7b583854a5c ] Despite extensive testing of commit 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition") I failed to conclude that the PHYSTATUS bit of the PCS_STATUS register used in PCIe and USB3 falls as the PHY gets ready. Similar to the prior bug with UFS the code will generally get past the check before the transition and thereby "succeed". Correct the name of the register used PCIe and USB3 PHYs, replace mask_pcs_ready with a constant expression depending on the type of the PHY and check for the appropriate ready state. Cc: stable@vger.kernel.org Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Evan Green <evgreen@chromium.org> Cc: Niklas Cassel <niklas.cassel@linaro.org> Reported-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Fixes: 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01phy: qcom-qmp: Raise qcom_qmp_phy_enable() polling delayMarc Gonzalez1-1/+1
[ Upstream commit 5206026404190125436f81088eb3667076e56083 ] readl_poll_timeout() calls usleep_range() to sleep between reads. usleep_range() doesn't work efficiently for tiny values. Raise the polling delay in qcom_qmp_phy_enable() to bring it in line with the delay in qcom_qmp_phy_com_init(). Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21media: technisat-usb2: break out of loop at end of bufferSean Young1-12/+10
commit 0c4df39e504bf925ab666132ac3c98d6cbbe380b upstream. Ensure we do not access the buffer beyond the end if no 0xff byte is encountered. Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com Signed-off-by: Sean Young <sean@mess.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-21floppy: fix usercopy directionJann Horn1-2/+2
commit 52f6f9d74f31078964ca1574f7bb612da7877ac8 upstream. As sparse points out, these two copy_from_user() should actually be copy_to_user(). Fixes: 229b53c9bf4e ("take floppy compat ioctls to sodding floppy.c") Cc: stable@vger.kernel.org Acked-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-21iommu/amd: Fix race in increase_address_space()Joerg Roedel1-5/+11
[ Upstream commit 754265bcab78a9014f0f99cd35e0d610fcd7dfa7 ] After the conversion to lock-less dma-api call the increase_address_space() function can be called without any locking. Multiple CPUs could potentially race for increasing the address space, leading to invalid domain->mode settings and invalid page-tables. This has been happening in the wild under high IO load and memory pressure. Fix the race by locking this operation. The function is called infrequently so that this does not introduce a performance regression in the dma-api path again. Reported-by: Qian Cai <cai@lca.pw> Fixes: 256e4621c21a ('iommu/amd: Make use of the generic IOVA allocator') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21iommu/amd: Flush old domains in kdump kernelStuart Hayes1-0/+24
[ Upstream commit 36b7200f67dfe75b416b5281ed4ace9927b513bc ] When devices are attached to the amd_iommu in a kdump kernel, the old device table entries (DTEs), which were copied from the crashed kernel, will be overwritten with a new domain number. When the new DTE is written, the IOMMU is told to flush the DTE from its internal cache--but it is not told to flush the translation cache entries for the old domain number. Without this patch, AMD systems using the tg3 network driver fail when kdump tries to save the vmcore to a network system, showing network timeouts and (sometimes) IOMMU errors in the kernel log. This patch will flush IOMMU translation cache entries for the old domain when a DTE gets overwritten with a new domain number. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Fixes: 3ac3e5ee5ed5 ('iommu/amd: Copy old trans table from old kernel') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21dmaengine: rcar-dmac: Fix DMACHCLR handling if iommu is mappedYoshihiro Shimoda1-9/+19
[ Upstream commit cf24aac38698bfa1d021afd3883df3c4c65143a4 ] The commit 20c169aceb45 ("dmaengine: rcar-dmac: clear pertinence number of channels") forgets to clear the last channel by DMACHCLR in rcar_dmac_init() (and doesn't need to clear the first channel) if iommu is mapped to the device. So, this patch fixes it by using "channels_mask" bitfield. Note that the hardware and driver don't support more than 32 bits in DMACHCLR register anyway, so this patch should reject more than 32 channels in rcar_dmac_parse_of(). Fixes: 20c169aceb459575 ("dmaengine: rcar-dmac: clear pertinence number of channels") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1567424643-26629-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21dmaengine: sprd: Fix the DMA link-list configurationBaolin Wang1-2/+8
[ Upstream commit 689379c2f383b1fdfdff03e84cf659daf62f2088 ] For the Spreadtrum DMA link-list mode, when the DMA engine got a slave hardware request, which will trigger the DMA engine to load the DMA configuration from the link-list memory automatically. But before the slave hardware request, the slave will get an incorrect residue due to the first node used to trigger the link-list was configured as the last source address and destination address. Thus we should make sure the first node was configured the start source address and destination address, which can fix this issue. Fixes: 4ac695464763 ("dmaengine: sprd: Support DMA link-list mode") Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/77868edb7aff9d5cb12ac3af8827ef2e244441a6.1567150471.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21iommu/vt-d: Remove global page flush supportJacob Pan1-21/+15
[ Upstream commit 8744daf4b0699b724ee0a56b313a6c0c4ea289e3 ] Global pages support is removed from VT-d spec 3.0. Since global pages G flag only affects first-level paging structures and because DMA request with PASID are only supported by VT-d spec. 3.0 and onward, we can safely remove global pages support. For kernel shared virtual address IOTLB invalidation, PASID granularity and page selective within PASID will be used. There is no global granularity supported. Without this fix, IOTLB invalidation will cause invalid descriptor error in the queued invalidation (QI) interface. Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode") Reported-by: Sanjay K Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21dmaengine: ti: omap-dma: Add cleanup in omap_dma_probe()Wenwen Wang1-1/+3
[ Upstream commit 962411b05a6d3342aa649e39cda1704c1fc042c6 ] If devm_request_irq() fails to disable all interrupts, no cleanup is performed before retuning the error. To fix this issue, invoke omap_dma_free() to do the cleanup. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/1565938570-7528-1-git-send-email-wenwen@cs.uga.edu Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21dmaengine: ti: dma-crossbar: Fix a memory leak bugWenwen Wang1-1/+3
[ Upstream commit 2c231c0c1dec42192aca0f87f2dc68b8f0cbc7d2 ] In ti_dra7_xbar_probe(), 'rsv_events' is allocated through kcalloc(). Then of_property_read_u32_array() is invoked to search for the property. However, if this process fails, 'rsv_events' is not deallocated, leading to a memory leak bug. To fix this issue, free 'rsv_events' before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/1565938136-7249-1-git-send-email-wenwen@cs.uga.edu Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21net: seeq: Fix the function used to release some memory in an error handling ↵Christophe JAILLET1-3/+4
path [ Upstream commit e1e54ec7fb55501c33b117c111cb0a045b8eded2 ] In commit 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv"), a call to 'get_zeroed_page()' has been turned into a call to 'dma_alloc_coherent()'. Only the remove function has been updated to turn the corresponding 'free_page()' into 'dma_free_attrs()'. The error hndling path of the probe function has not been updated. Fix it now. Rename the corresponding label to something more in line. Fixes: 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove ↵Christophe JAILLET1-1/+4
functions [ Upstream commit dd7078f05e1b774a9e8c9f117101d97e4ccd0691 ] Call to 'pci_free_irq_vectors()' are missing both in the error handling path of the probe function, and in the remove function. Add them. Fixes: 19971f5ea0ab ("enetc: add PTP clock driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21net: dsa: microchip: add KSZ8563 compatibility stringRazvan Stefanescu1-0/+1
[ Upstream commit d9033ae95cf445150fcc5856ccf024f41f0bd0b9 ] It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21net: aquantia: fix out of memory condition on rx sideDmitry Bogdanov1-1/+2
[ Upstream commit be6cef69ba570ebb327eba1ef6438f7af49aaf86 ] On embedded environments with hard memory limits it is a normal although rare case when skb can't be allocated on rx part under high traffic. In such OOM cases napi_complete_done() was not called. So the napi object became in an invalid state like it is "scheduled". Kernel do not re-schedules the poll of that napi object. Consequently, kernel can not remove that object the system hangs on `ifconfig down` waiting for a poll. We are fixing this by gracefully closing napi poll routine with correct invocation of napi_complete_done. This was reproduced with artificially failing the allocation of skb to simulate an "out of memory" error case and check that traffic does not get stuck. Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21net: aquantia: linkstate irq should be oneshotIgor Russkikh1-1/+1
[ Upstream commit 5c47e3ba6fe52465603cf9d816b3371e6881d649 ] Declaring threaded irq handler should also indicate the irq is oneshot. It is oneshot indeed, because HW implements irq automasking on trigger. Not declaring this causes some kernel configurations to fail on interface up, because request_threaded_irq returned an err code. The issue was originally hidden on normal x86_64 configuration with latest kernel, because depending on interrupt controller, irq driver added ONESHOT flag on its own. Issue was observed on older kernels (4.14) where no such logic exists. Fixes: 4c83f170b3ac ("net: aquantia: link status irq handling") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reported-by: Michael Symolkin <Michael.Symolkin@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21net: aquantia: reapply vlan filters on upDmitry Bogdanov1-0/+4
[ Upstream commit c2ef057ee775e229d3138add59f937d93a3a59d8 ] In case of device reconfiguration the driver may reset the device invisible for other modules, vlan module in particular. So vlans will not be removed&created and vlan filters will not be configured in the device. The patch reapplies the vlan filters at device start. Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21net: aquantia: fix removal of vlan 0Dmitry Bogdanov1-1/+2
[ Upstream commit 6fdc060d7476ef73c8029b652d252c1a7b4de948 ] Due to absence of checking against the rx flow rule when vlan 0 is being removed, the other rule could be removed instead of the rule with vlan 0 Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21amd-xgbe: Fix error path in xgbe_mod_init()YueHaibing1-2/+8
[ Upstream commit b6b4dc4c1fa7f1c99398e7dc85758049645e9588 ] In xgbe_mod_init(), we should do cleanup if some error occurs Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: efbaa828330a ("amd-xgbe: Add support to handle device renaming") Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21i2c: mediatek: disable zero-length transfers for mt8183Hsin-Yi Wang1-1/+10
[ Upstream commit abf4923e97c3abbbd1e59f0e13c7c214c93c6aaa ] Quoting from mt8183 datasheet, the number of transfers to be transferred in one transaction should be set to bigger than 1, so we should forbid zero-length transfer and update functionality. Reported-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Qii Wang <qii.wang@mediatek.com> [wsa: shortened commit message a little] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21i2c: iproc: Stop advertising support of SMBUS quick cmdLori Hikichi1-1/+4
[ Upstream commit b3d604d405166edfd4e1e6053409b85008f4f56d ] The driver does not support the SMBUS Quick command so remove the flag that indicates that level of support. By default the i2c_detect tool uses the quick command to try and detect devices at some bus addresses. If the quick command is used then we will not detect the device, even though it is present. Fixes: e6e5dd3566e0 (i2c: iproc: Add Broadcom iProc I2C Driver) Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21i2c: designware: Synchronize IRQs when unregistering slave clientJarkko Nikula1-0/+1
[ Upstream commit c486dcd2f1bbdd524a1e0149734b79e4ae329650 ] Make sure interrupt handler i2c_dw_irq_handler_slave() has finished before clearing the the dev->slave pointer in i2c_dw_unreg_slave(). There is possibility for a race if i2c_dw_irq_handler_slave() is running on another CPU while clearing the dev->slave pointer. Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21sky2: Disable MSI on yet another ASUS boards (P6Xxxx)Takashi Iwai1-0/+7
[ Upstream commit 189308d5823a089b56e2299cd96589507dac7319 ] A similar workaround for the suspend/resume problem is needed for yet another ASUS machines, P6X models. Like the previous fix, the BIOS doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_* entries are used instead. Reported-and-tested-by: SteveM <swm@swm1.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21ibmvnic: Do not process reset during or after device removalThomas Falcon1-1/+5
[ Upstream commit 36f1031c51a2538e5558fb44c6d6b88f98d3c0f2 ] Currently, the ibmvnic driver will not schedule device resets if the device is being removed, but does not check the device state before the reset is actually processed. This leads to a race where a reset is scheduled with a valid device state but is processed after the driver has been removed, resulting in an oops. Fix this by checking the device state before processing a queued reset event. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21usb: host: xhci-tegra: Set DMA mask correctlyNagarjuna Kristam1-0/+10
[ Upstream commit 993cc8753453fccfe060a535bbe21fcf1001b626 ] The Falcon microcontroller that runs the XUSB firmware and which is responsible for exposing the XHCI interface can address only 40 bits of memory. Typically that's not a problem because Tegra devices don't have enough system memory to exceed those 40 bits. However, if the ARM SMMU is enable on Tegra186 and later, the addresses passed to the XUSB controller can be anywhere in the 48-bit IOV address space of the ARM SMMU. Since the DMA/IOMMU API starts allocating from the top of the IOVA space, the Falcon microcontroller is not able to load the firmware successfully. Fix this by setting the DMA mask to 40 bits, which will force the DMA API to map the buffer for the firmware to an IOVA that is addressable by the Falcon. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/1566989697-13049-1-git-send-email-nkristam@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-18 08:01:59 +0300