summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-08-25dpaa2-eth: trace the allocated address instead of page structChen Lin1-2/+2
commit e34f49348f8b7a53205b6f77707a3a6a40cf420b upstream. We should trace the allocated address instead of page struct. Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer") Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25i2c: qcom-geni: Fix GPI DMA buffer sync-backRobin Reckmann1-2/+3
commit 8689b80b22dbf1f5e993233370fe57f08731b14d upstream. Fix i2c transfers using GPI DMA mode for all message types that do not set the I2C_M_DMA_SAFE flag (e.g. SMBus "read byte"). In this case a bounce buffer is returned by i2c_get_dma_safe_msg_buf(), and it has to synced back to the message after the transfer is done. Add missing assignment of dma buffer in geni_i2c_gpi(). Set xferred in i2c_put_dma_safe_msg_buf() to true in case of no error to ensure the sync-back of this dma buffer to the message. Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Signed-off-by: Robin Reckmann <robin.reckmann@gmail.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25nvme-fc: fix the fc_appid_store return valueChristoph Hellwig1-1/+2
commit 9317d0014499182c77a03cd095e83bcfb0f53750 upstream. "nvme-fc: fold t fc_update_appid into fc_appid_store" accidentally changed the userspace interface for the appid attribute, because the code that decrements "count" to remove a trailing '\n' in the parsing results in the decremented value being incorrectly be returned from the sysfs write. Fix this by keeping an orig_count variable for the full length of the write. Fixes: c814153c83a8 ("nvme-fc: fold t fc_update_appid into fc_appid_store") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Tested-by: Muneendra Kumar M <muneendra.kumar@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25geneve: fix TOS inheriting for ipv4Matthias May1-4/+8
commit b4ab94d6adaa5cf842b68bd28f4b50bc774496bd upstream. The current code retrieves the TOS field after the lookup on the ipv4 routing table. The routing process currently only allows routing based on the original 3 TOS bits, and not on the full 6 DSCP bits. As a result the retrieved TOS is cut to the 3 bits. However for inheriting purposes the full 6 bits should be used. Extract the full 6 bits before the route lookup and use that instead of the cut off 3 TOS bits. Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.") Signed-off-by: Matthias May <matthias.may@westermo.com> Acked-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25atm: idt77252: fix use-after-free bugs caused by tst_timerDuoming Zhou1-0/+1
commit 3f4093e2bf4673f218c0bf17d8362337c400e77b upstream. There are use-after-free bugs caused by tst_timer. The root cause is that there are no functions to stop tst_timer in idt77252_exit(). One of the possible race conditions is shown below: (thread 1) | (thread 2) | idt77252_init_one | init_card | fill_tst | mod_timer(&card->tst_timer, ...) idt77252_exit | (wait a time) | tst_timer | | ... kfree(card) // FREE | | card->soft_tst[e] // USE The idt77252_dev is deallocated in idt77252_exit() and used in timer handler. This patch adds del_timer_sync() in idt77252_exit() in order that the timer handler could be stopped before the idt77252_dev is deallocated. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220805070008.18007-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25tsnep: Fix tsnep_tx_unmap() error path usageGerhard Engleder1-4/+4
commit b3bb8628bf64440065976c71e4ab09186c393597 upstream. If tsnep_tx_map() fails, then tsnep_tx_unmap() shall start at the write index like tsnep_tx_map(). This is different to the normal operation. Thus, add an additional parameter to tsnep_tx_unmap() to enable start at different positions for successful TX and failed TX. Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25xen/xenbus: fix return type in xenbus_file_read()Dan Carpenter1-2/+2
commit 32ad11127b95236dfc52375f3707853194a7f4b4 upstream. This code tries to store -EFAULT in an unsigned int. The xenbus_file_read() function returns type ssize_t so the negative value is returned as a positive value to the user. This change forces another change to the min() macro. Originally, the min() macro used "unsigned" type which checkpatch complains about. Also unsigned type would break if "len" were not capped at MAX_RW_COUNT. Use size_t for the min(). (No effect on runtime for the min_t() change). Fixes: 2fb3683e7b16 ("xen: Add xenbus device driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Link: https://lore.kernel.org/r/YutxJUaUYRG/VLVc@kili Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25nfp: ethtool: fix the display error of `ethtool -m DEVNAME`Yu Xiao1-0/+2
commit 4ae97cae07e15d41e5c0ebabba64c6eefdeb0bbe upstream. The port flag isn't set to `NFP_PORT_CHANGED` when using `ethtool -m DEVNAME` before, so the port state (e.g. interface) cannot be updated. Therefore, it caused that `ethtool -m DEVNAME` sometimes cannot read the correct information. E.g. `ethtool -m DEVNAME` cannot work when load driver before plug in optical module, as the port interface is still NONE without port update. Now update the port state before sending info to NIC to ensure that port interface is correct (latest state). Fixes: 61f7c6f44870 ("nfp: implement ethtool get module EEPROM") Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25NTB: ntb_tool: uninitialized heap data in tool_fn_write()Dan Carpenter1-3/+5
commit 45e1058b77feade4e36402828bfe3e0d3363177b upstream. The call to: ret = simple_write_to_buffer(buf, size, offp, ubuf, size); will return success if it is able to write even one byte to "buf". The value of "*offp" controls which byte. This could result in reading uninitialized data when we do the sscanf() on the next line. This code is not really desigined to handle partial writes where *offp is non-zero and the "buf" is preserved and re-used between writes. Just ban partial writes and replace the simple_write_to_buffer() with copy_from_user(). Fixes: 578b881ba9c4 ("NTB: Add tool test client") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25vdpa_sim_blk: set number of address spaces and virtqueue groupsStefano Garzarella1-0/+6
commit 19cd4a5471b8eaa4bd161b0fdb4567f2fc88d809 upstream. Commit bda324fd037a ("vdpasim: control virtqueue support") added two new fields (nas, ngroups) to vdpasim_dev_attr, but we forgot to initialize them for vdpa_sim_blk. When creating a new vdpa_sim_blk device this causes the kernel to panic in this way:    $ vdpa dev add mgmtdev vdpasim_blk name blk0    BUG: kernel NULL pointer dereference, address: 0000000000000030    ...    RIP: 0010:vhost_iotlb_add_range_ctx+0x41/0x220 [vhost_iotlb]    ...    Call Trace:     <TASK>     vhost_iotlb_add_range+0x11/0x800 [vhost_iotlb]     vdpasim_map_range+0x91/0xd0 [vdpa_sim]     vdpasim_alloc_coherent+0x56/0x90 [vdpa_sim]     ... This happens because vdpasim->iommu[0] is not initialized when dev_attr.nas is 0. Let's fix this issue by initializing both (nas, ngroups) to 1 for vdpa_sim_blk. Fixes: bda324fd037a ("vdpasim: control virtqueue support") Cc: gautam.dawar@xilinx.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220621151323.190431-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25vdpa_sim: use max_iotlb_entries as a limit in vhost_iotlb_initStefano Garzarella1-2/+2
commit 67f8f10c0bd78c4a0f0e983e050ab90da015323b upstream. Commit bda324fd037a ("vdpasim: control virtqueue support") changed the allocation of iotlbs calling vhost_iotlb_init() for each address space, instead of vhost_iotlb_alloc(). With this change we forgot to use the limit we had introduced with the `max_iotlb_entries` module parameter. Fixes: bda324fd037a ("vdpasim: control virtqueue support") Cc: gautam.dawar@xilinx.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220621151208.189959-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25clk: imx93: Correct the edma1's parent clockJacky Bai1-1/+1
commit ebb4f1eb9360036be5ea70de82c5703ca0e64d43 upstream. For EDMA1 in AONMIX, its parent clock should be from cm33_root, so Correct it. Fixes: 24defbe194b65("clk: imx: add i.MX93 clk") Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20220609132902.3504651-4-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25plip: avoid rcu debug splatFlorian Westphal1-1/+1
commit bc3c8fe3c79bcdae4d90e3726054fac5cca8ac32 upstream. WARNING: suspicious RCU usage 5.2.0-rc2-00605-g2638eb8b50cfc #1 Not tainted drivers/net/plip/plip.c:1110 suspicious rcu_dereference_check() usage! plip_open is called with RTNL held, switch to the correct helper. Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20220807115304.13257-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25mlx5: do not use RT_TOS for IPv6 flowlabelMatthias May1-2/+2
commit bcb0da7fffee9464073998b267ce5543da2356d2 upstream. According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: ce99f6b97fcd ("net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25vxlan: do not use RT_TOS for IPv6 flowlabelMatthias May1-1/+1
commit e488d4f5d6e4cd1e728ba4ddbdcd7ef5f4d13a21 upstream. According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25geneve: do not use RT_TOS for IPv6 flowlabelMatthias May1-2/+1
commit ca2bb69514a8bc7f83914122f0d596371352416c upstream. According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: 3a56f86f1be6 ("geneve: handle ipv6 priority like ipv4 tos") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ACPI: property: Return type of acpi_add_nondev_subnodes() should be boolSakari Ailus1-4/+4
commit 85140ef275f577f64e8a2c5789447222dfc14fc4 upstream. The value acpi_add_nondev_subnodes() returns is bool so change the return type of the function to match that. Fixes: 445b0eb058f5 ("ACPI / property: Add support for data-only subnodes") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25octeontx2-af: Fix key checking for source macSubbaraya Sundeep1-1/+2
commit c3c290276927a3ae79342a4e17ec0500c138c63a upstream. Given a field with its location/offset in input packet, the key checking logic verifies whether extracting the field can be supported or not based on the mkex profile loaded in hardware. This logic is wrong wrt source mac and this patch fixes that. Fixes: 9b179a960a96 ("octeontx2-af: Generate key field bit mask from KEX profile") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25octeontx2-af: Fix mcam entry resource leakSubbaraya Sundeep2-0/+12
commit 3f8fe40ab7730cf8eb6f8b8ff412012f7f6f8f48 upstream. The teardown sequence in FLR handler returns if no NIX LF is attached to PF/VF because it indicates that graceful shutdown of resources already happened. But there is a chance of all allocated MCAM entries not being freed by PF/VF. Hence free mcam entries even in case of detached LF. Fixes: c554f9c1574e ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25octeontx2-af: suppress external profile loading warningHarman Kalra1-1/+1
commit cf2437626502b5271d19686b03dea306efe17ea0 upstream. The packet parser profile supplied as firmware may not be present all the time and default profile is used mostly. Hence suppress firmware loading warning from kernel due to absence of firmware in kernel image. Fixes: 3a7244152f9c ("octeontx2-af: add support for custom KPU entries") Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25octeontx2-af: Apply tx nibble fixup alwaysStanislaw Kardach1-3/+4
commit dd1d1a8a6b29b6b472fd0d449b29eb806c411dd2 upstream. NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some silicon revisions. Mistakenly this fixup was only applied to the default MKEX profile while it should also be applied to any loaded profile. Fixes: 1c1935c9945d ("octeontx2-af: Add NIX1 interfaces to NPC") Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25octeontx2-pf: Fix NIX_AF_TL3_TL2X_LINKX_CFG register configurationNaveen Mamindlapalli2-5/+15
commit 13c9f4dc102f2856e80b92486c41841e25e23772 upstream. For packets scheduled to RPM and LBK, NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] selects the TL3 or TL2 scheduling level as the one used for link/channel selection and backpressure. For each scheduling queue at the selected level: Setting NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG[ENA] = 1 allows the TL3/TL2 queue to schedule packets to a specified RPM or LBK link and channel. There is an issue in the code where NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] is set to TL3 where as the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG is configured for TL2 queue in some cases. As a result packets will not transmit on that link/channel. This patch fixes the issue by configuring the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG register depending on the NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] value. Fixes: caa2da34fd25a ("octeontx2-pf: Initialize and config queues") Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20220802142813.25031-1-naveenm@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25Input: iqs7222 - remove support for RF filterJeff LaBundy1-7/+0
commit 381932cf61d52bde656c8596c0cb8f46bed53dc0 upstream. The vendor has marked the RF filter enable control as reserved in the datasheet; remove it from the driver. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-7-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25Input: iqs7222 - handle reset during ATIJeff LaBundy1-3/+6
commit 8635c68891c6d786d644747d599c41bdf512fbbf upstream. If the device suffers a spurious reset during ATI, there is no point in enduring any further retries. Instead, simply return successfully from the polling loop. In this case, the interrupt handler will intervene and recognize the device has been reset. It then proceeds to initialize the device and trigger ATI once more. As part of this change, swap the order of status field evaluation to match that of the interrupt handler, and correct a nearby off-by-one error that causes an error message to suggest the final attempt will be retried. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-6-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25Input: iqs7222 - acknowledge reset before writing registersJeff LaBundy1-3/+29
commit 2e70ef525b7309287b2d4dd24e7c9c038a006328 upstream. If the device suffers a spurious reset while reacting to a previous spurious reset, the second reset interrupt is preempted because the ACK_RESET bit is written last. To solve this problem, write the ACK_RESET bit prior to writing any other registers. This ensures that any registers written before the second spurious reset will be rewritten. Last but not least, the order in which the ACK_RESET bit is written relative to the second filter beta register is important for select variants of silicon. Enforce the correct order so as to not clobber the system status register. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25Input: iqs7222 - protect volatile registersJeff LaBundy1-4/+14
commit 1e4189d8af2749e2db406f92bdc4abccbab63138 upstream. Select variants of silicon silently mirror part of the event mask register to the system setup register (0xD0), and vice versa. For the following sequence: 1. Read registers 0xD0 onward and store their contents. 2. Modify the contents, including event mask fields. 3. Write registers 0xD0 onward with the modified contents. 4. Write register 0xD0 on its own again later, using the contents from step 1 to populate any reserved fields. ...the event mask register (e.g. address 0xDA) has been corrupted by writing register 0xD0 with contents that were made stale after step 3. To solve this problem, read register 0xD0 once more between steps 3 and 4. When register 0xD0 is written during step 4, the portion which is mirrored to the event mask register already matches what was written in step 3. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-4-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25Input: iqs7222 - fortify slider event reportingJeff LaBundy1-38/+58
commit 95215d3d19c5b47b8ccef8cb61c9dcd17ac7a669 upstream. The release cycle of any key mapped to a slider gesture relies upon trailing interrupts generated by other unmasked sources, the timing and presence of which are inconsistent. To solve this problem, explicitly report a release cycle to emulate a full keystroke. Also, unmask touch interrupts if the slider press event is defined; this ensures the device reports a final interrupt with coordinate = 0xFFFF once the finger is lifted. As a result of how the logic has been refactored, the press/release event can now be mapped to a GPIO. This is more convenient than the previous solution, which required each channel within the slider to specify the same GPIO. As part of this change, use the device's resolution rather than its number of interrupt status registers to more safely determine if it is capable of reporting gestures. Last but not least, make the code a bit simpler by eliminating some unnecessarily complex conditional statements and a macro that could be derived using information that is already available. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25Input: iqs7222 - correct slider event disable logicJeff LaBundy1-7/+9
commit 56a0c54c4c2bdb6c0952de90dd690020a703b50e upstream. If a positive swipe/flick gesture is defined but the corresponding negative gesture is not, the former is inadvertently disabled. Fix this by gently refactoring the logic responsible for disabling all gestures by default. As part of this change, make the code a bit simpler by eliminating a superfluous conditional check. If a slider event does not define an enable control, the second term of the bitwise AND operation is simply 0xFFFF. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25Input: mt6779-keypad - match hardware matrix organizationMattijs Korpershoek1-3/+5
commit d6ed52583034f9d2e39dead7c18e03380fd4edf2 upstream. The MediaTek keypad has a set of bits representing keys, from KEY0 to KEY77, arranged in 5 chunks of 15 bits split into 5 32-bit registers. In our implementation, we simply decided to use register number as row and offset in the register as column when encoding our "matrix". Because of this, we can have a 5x32 matrix which does not match the hardware at all, which is confusing. Change the row/column calculation to match the hardware. Fixes: f28af984e771 ("Input: mt6779-keypad - add MediaTek keypad driver") Co-developed-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220707075236.126631-2-mkorpershoek@baylibre.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25Input: exc3000 - fix return value check of wait_for_completion_timeoutMiaoqian Lin1-3/+4
commit 6bb7144c3fa16a5efb54a8e2aff1817b4168018e upstream. wait_for_completion_timeout() returns unsigned long not int. It returns 0 if timed out, and positive if completed. The check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case. Fixes: 102feb1ddfd0 ("Input: exc3000 - factor out vendor data request") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220411105828.22140-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25rtc: spear: set range maxZeng Jingxiang1-1/+1
commit 03c4cd6f89e074a51e289eb9129ac646f0f2bd29 upstream. In the commit f395e1d3b28d7c2c67b73bd467c4fb79523e1c65 ("rtc: spear: set range"), the value of RTC_TIMESTAMP_END_9999 was incorrectly set to range_min. 390 config->rtc->range_min = RTC_TIMESTAMP_BEGIN_0000; 391 config->rtc->range_max = RTC_TIMESTAMP_END_9999; Fixes: f395e1d3b28d ("rtc: spear: set range") Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220728100101.1906801-1-zengjx95@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25pinctrl: qcom: sm8250: Fix PDC mapJianhua Lu1-1/+1
commit 4b759ca15a4914f96ea204ea9200ceeb01d70666 upstream. Fix the PDC mapping for SM8250, gpio39 is mapped to irq73(not irq37). Fixes: b41efeed507a("pinctrl: qcom: sm8250: Specify PDC map.") Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220803015645.22388-1-lujianhua000@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25pinctrl: sunxi: Add I/O bias setting for H6 R-PIOSamuel Holland2-3/+5
commit fc153c8f283bf5925615195fc9d4056414d7b168 upstream. H6 requires I/O bias configuration on both of its PIO devices. Previously it was only done for the main PIO. The setting for Port L is at bit 0, so the bank calculation needs to account for the pin base. Otherwise the wrong bit is used. Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6") Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220713025233.27248-3-samuel@sholland.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25pinctrl: amd: Don't save/restore interrupt status and wake status bitsBasavaraj Natikar1-2/+9
commit b8c824a869f220c6b46df724f85794349bafbf23 upstream. Saving/restoring interrupt and wake status bits across suspend can cause the suspend to fail if an IRQ is serviced across the suspend cycle. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Fixes: 79d2c8bede2c ("pinctrl/amd: save pin registers over suspend/resume") Link: https://lore.kernel.org/r/20220613064127.220416-3-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25pinctrl: qcom: msm8916: Allow CAMSS GP clocks to be muxedNikita Travkin1-2/+2
commit 44339391c666e46cba522d19c65a6ad1071c68b7 upstream. GPIO 31, 32 can be muxed to GCC_CAMSS_GP(1,2)_CLK respectively but the function was never assigned to the pingroup (even though the function exists already). Add this mode to the related pins. Fixes: 5373a2c5abb6 ("pinctrl: qcom: Add msm8916 pinctrl driver") Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20220612145955.385787-4-nikita@trvn.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25pinctrl: nomadik: Fix refcount leak in nmk_pinctrl_dt_subnode_to_mapMiaoqian Lin1-1/+3
commit 4b32e054335ea0ce50967f63a7bfd4db058b14b9 upstream. of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak." Fixes: c2f6d059abfc ("pinctrl: nomadik: refactor DT parser to take two paths") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220607111602.57355-1-linmq006@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25pinctrl: renesas: rzg2l: Return -EINVAL for pins which have input disabledLad Prabhakar1-0/+2
commit 5223c511eb4f919e6b423b2f66e02674e97e77e3 upstream. Pin status reported by pinconf-pins file always reported pin status as "input enabled" even for pins which had input disabled. Fix this by returning -EINVAL for the pins which have input disabled. Fixes: c4c4637eb57f2 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver") Reported-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220511094057.3151-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: bgmac: Fix a BUG triggered by wrong bytes_complSandor Bodo-Merle1-1/+1
commit 1b7680c6c1f6de9904f1d9b05c952f0c64a03350 upstream. On one of our machines we got: kernel BUG at lib/dynamic_queue_limits.c:27! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G W O 4.14.275-rt132 #1 Hardware name: BRCM XGS iProc task: ee3415c0 task.stack: ee32a000 PC is at dql_completed+0x168/0x178 LR is at bgmac_poll+0x18c/0x6d8 pc : [<c03b9430>] lr : [<c04b5a18>] psr: 800a0313 sp : ee32be14 ip : 000005ea fp : 00000bd4 r10: ee558500 r9 : c0116298 r8 : 00000002 r7 : 00000000 r6 : ef128810 r5 : 01993267 r4 : 01993851 r3 : ee558000 r2 : 000070e1 r1 : 00000bd4 r0 : ee52c180 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 12c5387d Table: 8e88c04a DAC: 00000051 Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210) Stack: (0xee32be14 to 0xee32c000) be00: ee558520 ee52c100 ef128810 be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040 be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040 be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98 bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8 bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000 bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520 bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900 bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28 bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70 bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000 bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8) [<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494) [<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c) [<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98) [<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98) [<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0) [<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158) [<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24) Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7) The issue seems similar to commit 90b3b339364c ("net: hisilicon: Fix a BUG trigered by wrong bytes_compl") and potentially introduced by commit b38c83dd0866 ("bgmac: simplify tx ring index handling"). If there is an RX interrupt between setting ring->end and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free() can miscalculate the queue size while called from bgmac_poll(). The machine which triggered the BUG runs a v4.14 RT kernel - but the issue seems present in mainline too. Fixes: b38c83dd0866 ("bgmac: simplify tx ring index handling") Signed-off-by: Sandor Bodo-Merle <sbodomerle@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220808173939.193804-1-sbodomerle@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: dsa: felix: suppress non-changes to the tagging protocolVladimir Oltean1-0/+3
commit 4c46bb49460ee14c69629e813640d8b929e88941 upstream. The way in which dsa_tree_change_tag_proto() works is that when dsa_tree_notify() fails, it doesn't know whether the operation failed mid way in a multi-switch tree, or it failed for a single-switch tree. So even though drivers need to fail cleanly in ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify() again, to restore the old tag protocol for potential switches in the tree where the change did succeeed (before failing for others). This means for the felix driver that if we report an error in felix_change_tag_protocol(), we'll get another call where proto_ops == old_proto_ops. If we proceed to act upon that, we may do unexpected things. For example, we will call dsa_tag_8021q_register() twice in a row, without any dsa_tag_8021q_unregister() in between. Then we will actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown, which (if it manages to run at all, after walking through corrupted data structures) will leave the ports inoperational anyway. The bug can be readily reproduced if we force an error while in tag_8021q mode; this crashes the kernel. echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 Call trace: vcap_entry_get+0x24/0x124 ocelot_vcap_filter_del+0x198/0x270 felix_tag_8021q_vlan_del+0xd4/0x21c dsa_switch_tag_8021q_vlan_del+0x168/0x2cc dsa_switch_event+0x68/0x1170 dsa_tree_notify+0x14/0x34 dsa_port_tag_8021q_vlan_del+0x84/0x110 dsa_tag_8021q_unregister+0x15c/0x1c0 felix_tag_8021q_teardown+0x16c/0x180 felix_change_tag_protocol+0x1bc/0x230 dsa_switch_event+0x14c/0x1170 dsa_tree_change_tag_proto+0x118/0x1c0 Fixes: 7a29d220f4c0 ("net: dsa: felix: reimplement tagging protocol change with function pointers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220808125127.3344094-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: phy: c45 baset1: do not skip aneg configuration if clock role is not ↵Oleksij Rempel1-18/+16
specified commit 3702e4041cfda50bc697363d29511ce8f6b24795 upstream. In case master/slave clock role is not specified (which is default), the aneg registers will not be written. The visible impact of this is missing pause advertisement. So, rework genphy_c45_baset1_an_config_aneg() to be able to write advertisement registers even if clock role is unknown. Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: bcmgenet: Indicate MAC is in charge of PHY PMFlorian Fainelli1-0/+3
commit bc3410f250219660a7be032c01c954a53b2c26ab upstream. Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The GENET driver essentially does exactly what mdio_bus_phy_resume() does by calling phy_init_hw() plus phy_resume(). Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220804173605.1266574-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: phy: Warn about incorrect mdio_bus_phy_resume() stateFlorian Fainelli1-0/+6
commit 744d23c71af39c7dc77ac7c3cac87ae86a181a85 upstream. Calling mdio_bus_phy_resume() with neither the PHY state machine set to PHY_HALTED nor phydev->mac_managed_pm set to true is a good indication that we can produce a race condition looking like this: CPU0 CPU1 bcmgenet_resume -> phy_resume -> phy_init_hw -> phy_start -> phy_resume phy_start_aneg() mdio_bus_phy_resume -> phy_resume -> phy_write(..., BMCR_RESET) -> usleep() -> phy_read() with the phy_resume() function triggering a PHY behavior that might have to be worked around with (see bf8bfc4336f7 ("net: phy: broadcom: Fix brcm_fet_config_init()") for instance) that ultimately leads to an error reading from the PHY. Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220801233403.258871-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25virtio-blk: Avoid use-after-free on suspend/resumeShigeru Yoshida1-14/+10
commit 8d12ec10292877751ee4463b11a63bd850bc09b5 upstream. hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is freed on suspend and reallocated on resume. So, hctx->user_data is invalid after resume, and it will cause use-after-free accessing which will result in the kernel crash something like below: [ 22.428391] Call Trace: [ 22.428899] <TASK> [ 22.429339] virtqueue_add_split+0x3eb/0x620 [ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0 [ 22.430789] ? kvm_clock_get_cycles+0x14/0x30 [ 22.431496] virtqueue_add_sgs+0xad/0xd0 [ 22.432108] virtblk_add_req+0xe8/0x150 [ 22.432692] virtio_queue_rqs+0xeb/0x210 [ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280 [ 22.434059] __blk_flush_plug+0xe1/0x140 [ 22.434853] blk_finish_plug+0x20/0x40 [ 22.435512] read_pages+0x20a/0x2e0 [ 22.436063] ? folio_add_lru+0x62/0xa0 [ 22.436652] page_cache_ra_unbounded+0x112/0x160 [ 22.437365] filemap_get_pages+0xe1/0x5b0 [ 22.437964] ? context_to_sid+0x70/0x100 [ 22.438580] ? sidtab_context_to_sid+0x32/0x400 [ 22.439979] filemap_read+0xcd/0x3d0 [ 22.440917] xfs_file_buffered_read+0x4a/0xc0 [ 22.441984] xfs_file_read_iter+0x65/0xd0 [ 22.442970] __kernel_read+0x160/0x2e0 [ 22.443921] bprm_execve+0x21b/0x640 [ 22.444809] do_execveat_common.isra.0+0x1a8/0x220 [ 22.446008] __x64_sys_execve+0x2d/0x40 [ 22.446920] do_syscall_64+0x37/0x90 [ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes this issue by getting vq from vblk, and removes virtblk_init_hctx(). Fixes: 4e0400525691 ("virtio-blk: support polling I/O") Cc: "Suwan Kim" <suwan.kim027@gmail.com> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Message-Id: <20220810160948.959781-1-syoshida@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25virtio_net: fix memory leak inside XPD_TX with mergeableXuan Zhuo1-1/+4
commit 7a542bee27c6a57e45c33cbbdc963325fd6493af upstream. When we call xdp_convert_buff_to_frame() to get xdpf, if it returns NULL, we should check if xdp_page was allocated by xdp_linearize_page(). If it is newly allocated, it should be freed here alone. Just like any other "goto err_xdp". Fixes: 44fa2dbd4759 ("xdp: transition into using xdp_frame for ndo_xdp_xmit") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25virtio: VIRTIO_HARDEN_NOTIFICATION is brokenMichael S. Tsirkin1-1/+2
commit ebe797f25f68f28581f46a9cb9c1997ac15c39a0 upstream. This option doesn't really work and breaks too many drivers. Not yet sure what's the right thing to do, for now let's make sure randconfig isn't broken by this. Fixes: c346dae4f3fb ("virtio: disable notification hardening by default") Cc: "Jason Wang" <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: atlantic: fix aq_vec index out of range errorChia-Lin Kao (AceLan)1-13/+8
commit 2ba5e47fb75fbb8fab45f5c1bc8d5c33d8834bd3 upstream. The final update statement of the for loop exceeds the array range, the dereference of self->aq_vec[i] is not checked and then leads to the index out of range error. Also fixed this kind of coding style in other for loop. [ 97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48 [ 97.937607] index 8 is out of range for type 'aq_vec_s *[8]' [ 97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2 [ 97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022 [ 97.937611] Workqueue: events_unbound async_run_entry_fn [ 97.937616] Call Trace: [ 97.937617] <TASK> [ 97.937619] dump_stack_lvl+0x49/0x63 [ 97.937624] dump_stack+0x10/0x16 [ 97.937626] ubsan_epilogue+0x9/0x3f [ 97.937627] __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 97.937629] ? __scm_send+0x348/0x440 [ 97.937632] ? aq_vec_stop+0x72/0x80 [atlantic] [ 97.937639] aq_nic_stop+0x1b6/0x1c0 [atlantic] [ 97.937644] aq_suspend_common+0x88/0x90 [atlantic] [ 97.937648] aq_pm_suspend_poweroff+0xe/0x20 [atlantic] [ 97.937653] pci_pm_suspend+0x7e/0x1a0 [ 97.937655] ? pci_pm_suspend_noirq+0x2b0/0x2b0 [ 97.937657] dpm_run_callback+0x54/0x190 [ 97.937660] __device_suspend+0x14c/0x4d0 [ 97.937661] async_suspend+0x23/0x70 [ 97.937663] async_run_entry_fn+0x33/0x120 [ 97.937664] process_one_work+0x21f/0x3f0 [ 97.937666] worker_thread+0x4a/0x3c0 [ 97.937668] ? process_one_work+0x3f0/0x3f0 [ 97.937669] kthread+0xf0/0x120 [ 97.937671] ? kthread_complete_and_exit+0x20/0x20 [ 97.937672] ret_from_fork+0x22/0x30 [ 97.937676] </TASK> v2. fixed "warning: variable 'aq_vec' set but not used" v3. simplified a for loop Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Link: https://lore.kernel.org/r/20220808081845.42005-1-acelan.kao@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25can: mcp251x: Fix race condition on receive interruptSebastian Würl1-3/+15
commit d80d60b0db6ff3dd2e29247cc2a5166d7e9ae37e upstream. The mcp251x driver uses both receiving mailboxes of the CAN controller chips. For retrieving the CAN frames from the controller via SPI, it checks once per interrupt which mailboxes have been filled and will retrieve the messages accordingly. This introduces a race condition, as another CAN frame can enter mailbox 1 while mailbox 0 is emptied. If now another CAN frame enters mailbox 0 until the interrupt handler is called next, mailbox 0 is emptied before mailbox 1, leading to out-of-order CAN frames in the network device. This is fixed by checking the interrupt flags once again after freeing mailbox 0, to correctly also empty mailbox 1 before leaving the handler. For reproducing the bug I created the following setup: - Two CAN devices, one Raspberry Pi with MCP2515, the other can be any. - Setup CAN to 1 MHz - Spam bursts of 5 CAN-messages with increasing CAN-ids - Continue sending the bursts while sleeping a second between the bursts - Check on the RPi whether the received messages have increasing CAN-ids - Without this patch, every burst of messages will contain a flipped pair v3: https://lore.kernel.org/all/20220804075914.67569-1-sebastian.wuerl@ororatech.com v2: https://lore.kernel.org/all/20220804064803.63157-1-sebastian.wuerl@ororatech.com v1: https://lore.kernel.org/all/20220803153300.58732-1-sebastian.wuerl@ororatech.com Fixes: bf66f3736a94 ("can: mcp251x: Move to threaded interrupts instead of workqueues.") Signed-off-by: Sebastian Würl <sebastian.wuerl@ororatech.com> Link: https://lore.kernel.org/all/20220804081411.68567-1-sebastian.wuerl@ororatech.com [mkl: reduce scope of intf1, eflag1] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev ↵Cezar Bulinaru1-9/+11
is null commit 4f61f133f354853bc394ec7d6028adb9b02dd701 upstream. Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct") Signed-off-by: Cezar Bulinaru <cbulinaru@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25can: ems_usb: fix clang's -Wunaligned-access warningMarc Kleine-Budde1-1/+1
commit a4cb6e62ea4d36e53fb3c0f18ea4503d7b76674f upstream. clang emits a -Wunaligned-access warning on struct __packed ems_cpc_msg. The reason is that the anonymous union msg (not declared as packed) is being packed right after some non naturally aligned variables (3*8 bits + 2*32) inside a packed struct: | struct __packed ems_cpc_msg { | u8 type; /* type of message */ | u8 length; /* length of data within union 'msg' */ | u8 msgid; /* confirmation handle */ | __le32 ts_sec; /* timestamp in seconds */ | __le32 ts_nsec; /* timestamp in nano seconds */ | /* ^ not naturally aligned */ | | union { | /* ^ not declared as packed */ | u8 generic[64]; | struct cpc_can_msg can_msg; | struct cpc_can_params can_params; | struct cpc_confirm confirmation; | struct cpc_overrun overrun; | struct cpc_can_error error; | struct cpc_can_err_counter err_counter; | u8 can_state; | } msg; | }; Starting from LLVM 14, having an unpacked struct nested in a packed struct triggers a warning. c.f. [1]. Fix the warning by marking the anonymous union as packed. [1] https://github.com/llvm/llvm-project/issues/55520 Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/all/20220802094021.959858-1-mkl@pengutronix.de Cc: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Cc: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25drm/i915: pass a pointer for tlb seqno at vma_invalidate_tlb()Mauro Carvalho Chehab3-5/+5
commit 9d50bff40e3e366886ec37299fc317edf84be0c9 upstream. WRITE_ONCE() should happen at the original var, not on a local copy of it. Cc: stable@vger.kernel.org Fixes: 59eda6ce824e ("drm/i915/gt: Batch TLB invalidations") Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [added cc-stable while merging it] Link: https://patchwork.freedesktop.org/patch/msgid/f9550e6bacea10131ff40dd8981b69eb9251cdcd.1659598090.git.mchehab@kernel.org (cherry picked from commit 3d037d99e61a1e7a3ae3d214146d88db349dd19f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 10:27:54 +0300