summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-06-09pinctrl/rockchip: support setting input-enable paramCaleb Connolly1-1/+11
commit 42d90a1e5caf73138ddde42da5a9fe2b543f9a2c upstream. Handle the PIN_CONFIG_INPUT_ENABLE param for configuring GPIOs as input. Signed-off-by: Caleb Connolly <kc@postmarketos.org> Link: https://lore.kernel.org/r/20220328005005.72492-3-kc@postmarketos.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09tty: n_gsm: Fix packet data hex dump outputTony Lindgren1-8/+23
commit 925ea0fa5277c1e6bb9e51955ef34eea9736c3d7 upstream. The module param debug for n_gsm uses KERN_INFO level, but the hexdump now uses KERN_DEBUG level. This started after commit 091cb0994edd ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds"). We now use dynamic_hex_dump() unless DEBUG is set. This causes no packets to be seen with modprobe n_gsm debug=0x1f unlike earlier. Let's fix this by adding gsm_hex_dump_bytes() that calls print_hex_dump() with KERN_INFO to match what n_gsm is doing with the other debug related output. Fixes: 091cb0994edd ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds") Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220512131506.1216-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09macsec: fix UAF bug for real_devZiyang Xuan1-0/+7
commit 196a888ca6571deb344468e1d7138e3273206335 upstream. Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem. Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine") Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09md: bcache: check the return value of kzalloc() in detached_dev_do_request()Jia-Ju Bai1-0/+6
commit 40f567bbb3b0639d2ec7d1c6ad4b1b018f80cf19 upstream. The function kzalloc() in detached_dev_do_request() can fail, so its return value should be checked. Fixes: bc082a55d25c ("bcache: fix inaccurate io state for detached bcache devices") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20220527152818.27545-4-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09md: fix double free of io_acct_set biosetXiao Ni1-4/+0
commit 42b805af102471f53e3c7867b8c2b502ea4eef7e upstream. Now io_acct_set is alloc and free in personality. Remove the codes that free io_acct_set in md_free and md_stop. Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality) Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09md: Don't set mddev private to NULL in raid0 pers->freeXiao Ni1-1/+0
commit 0f2571ad7a30ff6b33cde142439f9378669f8b4f upstream. In normal stop process, it does like this: do_md_stop | __md_stop (pers->free(); mddev->private=NULL) | md_free (free mddev) __md_stop sets mddev->private to NULL after pers->free. The raid device will be stopped and mddev memory is free. But in reshape, it doesn't free the mddev and mddev will still be used in new raid. In reshape, it first sets mddev->private to new_pers and then runs old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free. The new raid can't work anymore. It will panic when dereference mddev->private because of NULL pointer dereference. It can panic like this: [63010.814972] kernel BUG at drivers/md/raid10.c:928! [63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1 [63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020 [63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10] [63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246 [63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000 [63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800 [63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000 [63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200 [63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003 [63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000 [63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0 [63010.927363] Call Trace: [63010.929822] ? bio_reset+0xe/0x40 [63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10] [63010.938629] raid10_sync_request+0x756/0x1610 [raid10] [63010.943770] md_do_sync.cold+0x3e4/0x94c [63010.947698] md_thread+0xab/0x160 [63010.951024] ? md_write_inc+0x50/0x50 [63010.954688] kthread+0x149/0x170 [63010.957923] ? set_kthread_struct+0x40/0x40 [63010.962107] ret_from_fork+0x22/0x30 Removing the code that sets mddev->private to NULL in raid0 can fix problem. Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality) Reported-by: Fine Fan <ffan@redhat.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09RDMA/rxe: Generate a completion for unsupported/invalid opcodeXiao Yang1-1/+1
commit 2f917af777011c88e977b9b9a5d00b280d3a59ce upstream. Current rxe_requester() doesn't generate a completion when processing an unsupported/invalid opcode. If rxe driver doesn't support a new opcode (e.g. RDMA Atomic Write) and RDMA library supports it, an application using the new opcode can reproduce this issue. Fix the issue by calling "goto err;". Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20220410113513.27537-1-yangx.jy@fujitsu.com Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09RDMA/hns: Remove the num_cqc_timer variableYixing Liu4-5/+3
commit db5dfbf5b201df65c1f5332c4d9d5e7c2f42396b upstream. The bt number of cqc_timer of HIP09 increases compared with that of HIP08. Therefore, cqc_timer_bt_num and num_cqc_timer do not match. As a result, the driver may fail to allocate cqc_timer. So the driver needs to uniquely uses cqc_timer_bt_num to represent the bt number of cqc_timer. Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08") Link: https://lore.kernel.org/r/20220429093545.58070-1-liangwenpeng@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09staging: r8188eu: delete rtw_wx_read/write32()Dan Carpenter1-84/+2
commit 4d0cc9e0e53e9946d7b8dc58279c62dfa7a2191b upstream. These debugging tools let you call: status = usb_control_msg_recv/send(udev, 0, REALTEK_USB_VENQT_CMD_REQ, REALTEK_USB_VENQT_READ/WRITE, value, REALTEK_USB_VENQT_CMD_IDX, io_buf, size, RTW_USB_CONTROL_MSG_TIMEOUT, GFP_KERNEL); with a user controlled "value" in the 0-0xffff range. It's not a valid API. Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YoXS4OaD1oauPvmj@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09Revert "random: use static branch for crng_ready()"Jason A. Donenfeld1-10/+2
This reverts upstream commit f5bda35fba615ace70a656d4700423fa6c9bebee from stable. It's not essential and will take some time during 5.19 to work out properly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-09net: ipa: fix page free in ipa_endpoint_replenish_one()Alex Elder1-1/+1
commit 70132763d5d2e94cd185e3aa92ac6a3ba89068fa upstream. Currently the (possibly compound) pages used for receive buffers are freed using __free_pages(). But according to this comment above the definition of that function, that's wrong: If you want to use the page's reference count to decide when to free the allocation, you should allocate a compound page, and use put_page() instead of __free_pages(). Convert the call to __free_pages() in ipa_endpoint_replenish_one() to use put_page() instead. Fixes: 6a606b90153b8 ("net: ipa: allocate transaction in replenish loop") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09net: ipa: fix page free in ipa_endpoint_trans_release()Alex Elder1-5/+2
commit 155c0c90bca918de6e4327275dfc1d97fd604115 upstream. Currently the (possibly compound) page used for receive buffers are freed using __free_pages(). But according to this comment above the definition of that function, that's wrong: If you want to use the page's reference count to decide when to free the allocation, you should allocate a compound page, and use put_page() instead of __free_pages(). Convert the call to __free_pages() in ipa_endpoint_trans_release() to use put_page() instead. Fixes: ed23f02680caa ("net: ipa: define per-endpoint receive buffer size") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09phy: qcom-qmp: fix reset-controller leak on probe errorsJohan Hovold1-0/+9
commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream. Make sure to release the lane reset controller in case of a late probe error (e.g. probe deferral). Note that due to the reset controller being defined in devicetree in "lane" child nodes, devm_reset_control_get_exclusive() cannot be used directly. Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09coresight: core: Fix coresight device probe failure issueMao Jinlong1-11/+22
commit 8c1d3f79d9ca48e406b78e90e94cf09a8c076bf2 upstream. It is possibe that probe failure issue happens when the device and its child_device's probe happens at the same time. In coresight_make_links, has_conns_grp is true for parent, but has_conns_grp is false for child device as has_conns_grp is set to true in coresight_create_conns_sysfs_group. The probe of parent device will fail at this condition. Add has_conns_grp check for child device before make the links and make the process from device_register to connection_create be atomic to avoid this probe failure issue. Cc: stable@vger.kernel.org Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Suggested-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com> Link: https://lore.kernel.org/r/20220309142206.15632-1-quic_jinlmao@quicinc.com [ Added Cc stable ] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09vdpasim: allow to enable a vq repeatedlyEugenio Pérez1-1/+4
commit 242436973831aa97e8ce19533c6c912ea8def31b upstream. Code must be resilient to enable a queue many times. At the moment the queue is resetting so it's definitely not the expected behavior. v2: set vq->ready = 0 at disable. Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Cc: stable@vger.kernel.org Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20220519145919.772896-1-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09misc: fastrpc: fix list iterator in fastrpc_req_mem_unmap_implSrinivas Kandagatla1-4/+5
commit c5c07c5958cf0c9af6e76813e6de15d42ee49822 upstream. This is another instance of incorrect use of list iterator and checking it for NULL. The list iterator value 'map' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty (in this case, the check 'if (!map) {' will always be false and never exit as expected). To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'map' as a dedicated pointer to point to the found element. Without this patch, Kernel crashes with below trace: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000ffff7fb03750 ... Call trace: fastrpc_map_create+0x70/0x290 [fastrpc] fastrpc_req_mem_map+0xf0/0x2dc [fastrpc] fastrpc_device_ioctl+0x138/0xc60 [fastrpc] __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xd4/0xfc do_el0_svc+0x28/0x90 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6) ---[ end trace 0000000000000000 ]--- Fixes: 5c1b97c7d7b7 ("misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP") Cc: stable@vger.kernel.org Reported-by: Jan Jablonsky <jjablonsky@snapchat.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220518152353.13058-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09phy: qcom-qmp: fix struct clk leak on probe errorsJohan Hovold1-1/+1
commit f0a4bc38a12f5a0cc5ad68670d9480e91e6a94df upstream. Make sure to release the pipe clock reference in case of a late probe error (e.g. probe deferral). Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220427063243.32576-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09clk: tegra: Add missing reset deassertionDiogo Ivo1-0/+12
commit 23a43cc437e747473d5f8f98b4fe189fb5c433b7 upstream. Commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks") removed deassertion of reset lines when enabling peripheral clocks. This breaks the initialization of the DFLL driver which relied on this behaviour. Fix this problem by adding explicit deassert/assert requests to the driver. Tested on Google Pixel C. Cc: stable@vger.kernel.org Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks") Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09gma500: fix an incorrect NULL check on list iteratorXiaomeng Tong1-3/+4
commit bdef417d84536715145f6dc9cc3275c46f26295a upstream. The bug is here: return crtc; The list iterator value 'crtc' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, return 'crtc' when found, otherwise return NULL. Cc: stable@vger.kernel.org fixes: 89c78134cc54d ("gma500: Add Poulsbo support") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220327052028.2013-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09tilcdc: tilcdc_external: fix an incorrect NULL check on list iteratorXiaomeng Tong1-3/+5
commit 8b917cbe38e9b0d002492477a9fc2bfee2412ce4 upstream. The bug is here: if (!encoder) { The list iterator value 'encoder' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'encoder' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: ec9eab097a500 ("drm/tilcdc: Add drm bridge support for attaching drm bridge drivers") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Tested-by: Jyri Sarha <jyri.sarha@iki.fi> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20220327061516.5076-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09serial: pch: don't overwrite xmit->buf[0] by x_charJiri Slaby1-20/+7
commit d9f3af4fbb1d955bbaf872d9e76502f6e3e803cb upstream. When x_char is to be sent, the TX path overwrites whatever is in the circular buffer at offset 0 with x_char and sends it using pch_uart_hal_write(). I don't understand how this was supposed to work if xmit->buf[0] already contained some character. It must have been lost. Remove this whole pop_tx_x() concept and do the work directly in the callers. (Without printing anything using dev_dbg().) Cc: <stable@vger.kernel.org> Fixes: 3c6a483275f4 (Serial: EG20T: add PCH_UART driver) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220503080808.28332-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09bcache: avoid journal no-space deadlock by reserving 1 journal bucketColy Li3-5/+29
commit 32feee36c30ea06e38ccb8ae6e5c44c6eec790a6 upstream. The journal no-space deadlock was reported time to time. Such deadlock can happen in the following situation. When all journal buckets are fully filled by active jset with heavy write I/O load, the cache set registration (after a reboot) will load all active jsets and inserting them into the btree again (which is called journal replay). If a journaled bkey is inserted into a btree node and results btree node split, new journal request might be triggered. For example, the btree grows one more level after the node split, then the root node record in cache device super block will be upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no space in journal buckets, the journal replay has to wait for new journal bucket to be reclaimed after at least one journal bucket replayed. This is one example that how the journal no-space deadlock happens. The solution to avoid the deadlock is to reserve 1 journal bucket in run time, and only permit the reserved journal bucket to be used during cache set registration procedure for things like journal replay. Then the journal space will never be fully filled, there is no chance for journal no-space deadlock to happen anymore. This patch adds a new member "bool do_reserve" in struct journal, it is inititalized to 0 (false) when struct journal is allocated, and set to 1 (true) by bch_journal_space_reserve() when all initialization done in run_cache_set(). In the run time when journal_reclaim() tries to allocate a new journal bucket, free_journal_buckets() is called to check whether there are enough free journal buckets to use. If there is only 1 free journal bucket and journal->do_reserve is 1 (true), the last bucket is reserved and free_journal_buckets() will return 0 to indicate no free journal bucket. Then journal_reclaim() will give up, and try next time to see whetheer there is free journal bucket to allocate. By this method, there is always 1 jouranl bucket reserved in run time. During the cache set registration, journal->do_reserve is 0 (false), so the reserved journal bucket can be used to avoid the no-space deadlock. Reported-by: Nikhil Kshirsagar <nkshirsagar@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220524102336.10684-5-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()Coly Li1-28/+13
commit 80db4e4707e78cb22287da7d058d7274bd4cb370 upstream. After making bch_sectors_dirty_init() being multithreaded, the existing incremental dirty sector counting in bch_root_node_dirty_init() doesn't release btree occupation after iterating 500000 (INIT_KEYS_EACH_TIME) bkeys. Because a read lock is added on btree root node to prevent the btree to be split during the dirty sectors counting, other I/O requester has no chance to gain the write lock even restart bcache_btree(). That is to say, the incremental dirty sectors counting is incompatible to the multhreaded bch_sectors_dirty_init(). We have to choose one and drop another one. In my testing, with 512 bytes random writes, I generate 1.2T dirty data and a btree with 400K nodes. With single thread and incremental dirty sectors counting, it takes 30+ minites to register the backing device. And with multithreaded dirty sectors counting, the backing device registration can be accomplished within 2 minutes. The 30+ minutes V.S. 2- minutes difference makes me decide to keep multithreaded bch_sectors_dirty_init() and drop the incremental dirty sectors counting. This is what this patch does. But INIT_KEYS_EACH_TIME is kept, in sectors_dirty_init_fn() the CPU will be released by cond_resched() after every INIT_KEYS_EACH_TIME keys iterated. This is to avoid the watchdog reports a bogus soft lockup warning. Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220524102336.10684-4-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09bcache: improve multithreaded bch_sectors_dirty_init()Coly Li2-38/+26
commit 4dc34ae1b45fe26e772a44379f936c72623dd407 upstream. Commit b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded") makes bch_sectors_dirty_init() to be much faster when counting dirty sectors by iterating all dirty keys in the btree. But it isn't in ideal shape yet, still can be improved. This patch does the following changes to improve current parallel dirty keys iteration on the btree, - Add read lock to root node when multiple threads iterating the btree, to prevent the root node gets split by I/Os from other registered bcache devices. - Remove local variable "char name[32]" and generate kernel thread name string directly when calling kthread_run(). - Allocate "struct bch_dirty_init_state state" directly on stack and avoid the unnecessary dynamic memory allocation for it. - Decrease BCH_DIRTY_INIT_THRD_MAX from 64 to 12 which is enough indeed. - Increase &state->started to count created kernel thread after it succeeds to create. - When wait for all dirty key counting threads to finish, use wait_event() to replace wait_event_interruptible(). With the above changes, the code is more clear, and some potential error conditions are avoided. Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220524102336.10684-3-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09bcache: improve multithreaded bch_btree_check()Coly Li2-33/+27
commit 622536443b6731ec82c563aae7807165adbe9178 upstream. Commit 8e7102273f59 ("bcache: make bch_btree_check() to be multithreaded") makes bch_btree_check() to be much faster when checking all btree nodes during cache device registration. But it isn't in ideal shap yet, still can be improved. This patch does the following thing to improve current parallel btree nodes check by multiple threads in bch_btree_check(), - Add read lock to root node while checking all the btree nodes with multiple threads. Although currently it is not mandatory but it is good to have a read lock in code logic. - Remove local variable 'char name[32]', and generate kernel thread name string directly when calling kthread_run(). - Allocate local variable "struct btree_check_state check_state" on the stack and avoid unnecessary dynamic memory allocation for it. - Reduce BCH_BTR_CHKTHREAD_MAX from 64 to 12 which is enough indeed. - Increase check_state->started to count created kernel thread after it succeeds to create. - When wait for all checking kernel threads to finish, use wait_event() to replace wait_event_interruptible(). With this change, the code is more clear, and some potential error conditions are avoided. Fixes: 8e7102273f59 ("bcache: make bch_btree_check() to be multithreaded") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220524102336.10684-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09stm: ltdc: fix two incorrect NULL checks on list iteratorXiaomeng Tong1-6/+10
commit 2e6c86be0e57079d1fb6c7c7e5423db096d0548a upstream. The two bugs are here: if (encoder) { if (bridge && bridge->timings) The list iterator value 'encoder/bridge' will *always* be set and non-NULL by drm_for_each_encoder()/list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, use a new variable '*_iter' as the list iterator, while use the old variable 'encoder/bridge' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 99e360442f223 ("drm/stm: Fix bus_flags handling") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220327055355.3808-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09carl9170: tx: fix an incorrect use of list iteratorXiaomeng Tong1-0/+3
commit 54a6f29522da3c914da30e50721dedf51046449a upstream. If the previous list_for_each_entry_continue_rcu() don't exit early (no goto hit inside the loop), the iterator 'cvif' after the loop will be a bogus pointer to an invalid structure object containing the HEAD (&ar->vif_list). As a result, the use of 'cvif' after that will lead to a invalid memory access (i.e., 'cvif->id': the invalid pointer dereference when return back to/after the callsite in the carl9170_update_beacon()). The original intention should have been to return the valid 'cvif' when found in list, NULL otherwise. So just return NULL when no entry found, to fix this bug. Cc: stable@vger.kernel.org Fixes: 1f1d9654e183c ("carl9170: refactor carl9170_update_beacon") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220328122820.1004-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09rtl818x: Prevent using not initialized queuesAlexander Wetzel1-2/+6
commit 746285cf81dc19502ab238249d75f5990bd2d231 upstream. Using not existing queues can panic the kernel with rtl8180/rtl8185 cards. Ignore the skb priority for those cards, they only have one tx queue. Pierre Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum: https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html He also confirmed that this patch fixes the issue. In summary this happened: After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a "divide error: 0000" when connecting to an AP. Control port tx now tries to use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in 2.10. Since only the rtl8187se part of the driver supports QoS, the priority of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185 cards. rtl8180 is then unconditionally reading out the priority and finally crashes on drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this patch: idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries "ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got initialized. Cc: stable@vger.kernel.org Reported-by: pa@panix.com Tested-by: pa@panix.com Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09iommu/dma: Fix iova map result check bugYunfei Wang1-3/+4
commit a3884774d731f03d3a3dd4fb70ec2d9341ceb39d upstream. The data type of the return value of the iommu_map_sg_atomic is ssize_t, but the data type of iova size is size_t, e.g. one is int while the other is unsigned int. When iommu_map_sg_atomic return value is compared with iova size, it will force the signed int to be converted to unsigned int, if iova map fails and iommu_map_sg_atomic return error code is less than 0, then (ret < iova_len) is false, which will to cause not do free iova, and the master can still successfully get the iova of map fail, which is not expected. Therefore, we need to check the return value of iommu_map_sg_atomic in two cases according to whether it is less than 0. Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()") Signed-off-by: Yunfei Wang <yf.wang@mediatek.com> Cc: <stable@vger.kernel.org> # 5.15.* Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20220507085204.16914-1-yf.wang@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09iommu/msm: Fix an incorrect NULL check on list iteratorXiaomeng Tong1-4/+7
commit 8b9ad480bd1dd25f4ff4854af5685fa334a2f57a upstream. The bug is here: if (!iommu || iommu->dev->of_node != spec->np) { The list iterator value 'iommu' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found (in fact, it will point to a invalid structure object containing HEAD). To fix the bug, use a new value 'iter' as the list iterator, while use the old value 'iommu' as a dedicated variable to point to the found one, and remove the unneeded check for 'iommu->dev->of_node != spec->np' outside the loop. Cc: stable@vger.kernel.org Fixes: f78ebca8ff3d6 ("iommu/msm: Add support for generic master bindings") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220501132823.12714-1-xiam0nd.tong@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09mt76: fix use-after-free by removing a non-RCU wcid pointerFelix Fietkau8-12/+13
commit 51fb1278aa57ae0fc54adaa786e1965362bed4fb upstream. Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and sta_info_[alloc, free]. [18853.876689] ================================================================== [18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76] [18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883 [18853.876786] [18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215 [18853.876840] Call trace: [18853.876861] dump_backtrace+0x0/0x3ec [18853.876878] show_stack+0x20/0x2c [18853.876899] dump_stack+0x11c/0x1ac [18853.876918] print_address_description+0x74/0x514 [18853.876934] kasan_report+0x134/0x174 [18853.876948] __asan_report_load8_noabort+0x44/0x50 [18853.876976] mt76_txq_schedule+0x204/0xaf8 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877002] mt76_txq_schedule_all+0x2c/0x48 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877030] mt7921_tx_worker+0xa0/0x1cc [mt7921_common f0875ebac9d7b4754e1010549e7db50fbd90a047] [18853.877054] __mt76_worker_fn+0x190/0x22c [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877071] kthread+0x2f8/0x3b8 [18853.877087] ret_from_fork+0x10/0x30 [18853.877098] [18853.877112] Allocated by task 941: [18853.877131] kasan_save_stack+0x38/0x68 [18853.877147] __kasan_kmalloc+0xd4/0xfc [18853.877163] kasan_kmalloc+0x10/0x1c [18853.877177] __kmalloc+0x264/0x3c4 [18853.877294] sta_info_alloc+0x460/0xf88 [mac80211] [18853.877410] ieee80211_prep_connection+0x204/0x1ee0 [mac80211] [18853.877523] ieee80211_mgd_auth+0x6c4/0xa4c [mac80211] [18853.877635] ieee80211_auth+0x20/0x2c [mac80211] [18853.877733] rdev_auth+0x7c/0x438 [cfg80211] [18853.877826] cfg80211_mlme_auth+0x26c/0x390 [cfg80211] [18853.877919] nl80211_authenticate+0x6d4/0x904 [cfg80211] [18853.877938] genl_rcv_msg+0x748/0x93c [18853.877954] netlink_rcv_skb+0x160/0x2a8 [18853.877969] genl_rcv+0x3c/0x54 [18853.877985] netlink_unicast_kernel+0x104/0x1ec [18853.877999] netlink_unicast+0x178/0x268 [18853.878015] netlink_sendmsg+0x3cc/0x5f0 [18853.878030] sock_sendmsg+0xb4/0xd8 [18853.878043] ____sys_sendmsg+0x2f8/0x53c [18853.878058] ___sys_sendmsg+0xe8/0x150 [18853.878071] __sys_sendmsg+0xc4/0x1f4 [18853.878087] __arm64_compat_sys_sendmsg+0x88/0x9c [18853.878101] el0_svc_common+0x1b4/0x390 [18853.878115] do_el0_svc_compat+0x8c/0xdc [18853.878131] el0_svc_compat+0x10/0x1c [18853.878146] el0_sync_compat_handler+0xa8/0xcc [18853.878161] el0_sync_compat+0x188/0x1c0 [18853.878171] [18853.878183] Freed by task 10927: [18853.878200] kasan_save_stack+0x38/0x68 [18853.878215] kasan_set_track+0x28/0x3c [18853.878228] kasan_set_free_info+0x24/0x48 [18853.878244] __kasan_slab_free+0x11c/0x154 [18853.878259] kasan_slab_free+0x14/0x24 [18853.878273] slab_free_freelist_hook+0xac/0x1b0 [18853.878287] kfree+0x104/0x390 [18853.878402] sta_info_free+0x198/0x210 [mac80211] [18853.878515] __sta_info_destroy_part2+0x230/0x2d4 [mac80211] [18853.878628] __sta_info_flush+0x300/0x37c [mac80211] [18853.878740] ieee80211_set_disassoc+0x2cc/0xa7c [mac80211] [18853.878851] ieee80211_mgd_deauth+0x4a4/0x10a0 [mac80211] [18853.878962] ieee80211_deauth+0x20/0x2c [mac80211] [18853.879057] rdev_deauth+0x7c/0x438 [cfg80211] [18853.879150] cfg80211_mlme_deauth+0x274/0x414 [cfg80211] [18853.879243] cfg80211_mlme_down+0xe4/0x118 [cfg80211] [18853.879335] cfg80211_disconnect+0x218/0x2d8 [cfg80211] [18853.879427] __cfg80211_leave+0x17c/0x240 [cfg80211] [18853.879519] cfg80211_leave+0x3c/0x58 [cfg80211] [18853.879611] wiphy_suspend+0xdc/0x200 [cfg80211] [18853.879628] dpm_run_callback+0x58/0x408 [18853.879642] __device_suspend+0x4cc/0x864 [18853.879658] async_suspend+0x34/0xf4 [18853.879673] async_run_entry_fn+0xe0/0x37c [18853.879689] process_one_work+0x508/0xb98 [18853.879702] worker_thread+0x7f4/0xcd4 [18853.879717] kthread+0x2f8/0x3b8 [18853.879731] ret_from_fork+0x10/0x30 [18853.879741] [18853.879757] The buggy address belongs to the object at ffffffaf989a2000 [18853.879757] which belongs to the cache kmalloc-8k of size 8192 [18853.879774] The buggy address is located 312 bytes inside of [18853.879774] 8192-byte region [ffffffaf989a2000, ffffffaf989a4000) [18853.879787] The buggy address belongs to the page: [18853.879807] page:000000004bda2a59 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d89a0 [18853.879823] head:000000004bda2a59 order:3 compound_mapcount:0 compound_pincount:0 [18853.879839] flags: 0x8000000000010200(slab|head) [18853.879857] raw: 8000000000010200 ffffffffbc89e208 ffffffffb7fb5208 ffffffaec000cc80 [18853.879873] raw: 0000000000000000 0000000000010001 00000001ffffffff 0000000000000000 [18853.879885] page dumped because: kasan: bad access detected [18853.879896] [18853.879907] Memory state around the buggy address: [18853.879922] ffffffaf989a2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879935] ffffffaf989a2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879948] >ffffffaf989a2100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879961] ^ [18853.879973] ffffffaf989a2180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879986] ffffffaf989a2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879998] ================================================================== Cc: stable@vger.kernel.org Reported-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09thermal: devfreq_cooling: use local ops instead of global opsKant Fan1-7/+18
commit b947769b8f778db130aad834257fcaca25df2edc upstream. Fix access illegal address problem in following condition: There are multiple devfreq cooling devices in system, some of them has EM model but others do not. Energy model ops such as state2power will append to global devfreq_cooling_ops when the cooling device with EM model is registered. It makes the cooling device without EM model also use devfreq_cooling_ops after appending when registered later by of_devfreq_cooling_register_power() or of_devfreq_cooling_register(). The IPA governor regards the cooling devices without EM model as a power actor, because they also have energy model ops, and will access illegal address at dfc->em_pd when execute cdev->ops->get_requested_power, cdev->ops->state2power or cdev->ops->power2state. Fixes: 615510fe13bd2 ("thermal: devfreq_cooling: remove old power model and use EM") Cc: 5.13+ <stable@vger.kernel.org> # 5.13+ Signed-off-by: Kant Fan <kant@allwinnertech.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09irqchip: irq-xtensa-mx: fix initial IRQ affinityMax Filippov1-4/+14
commit a255ee29252066d621df5d6b420bf534c6ba5bc0 upstream. When irq-xtensa-mx chip is used in non-SMP configuration its irq_set_affinity callback is not called leaving IRQ affinity set empty. As a result IRQ delivery does not work in that configuration. Initialize IRQ affinity of the xtensa MX interrupt distributor to CPU 0 for all external IRQ lines. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, ↵Pali Rohár1-1/+10
A38x, A39x commit a3d66a76348daf559873f19afc912a2a7c2ccdaf upstream. Register ARMADA_370_XP_INT_FABRIC_MASK_OFFS is Armada 370 and XP specific and on new Armada platforms it has different meaning. It does not configure Performance Counter Overflow interrupt masking. So do not touch this register on non-A370/XP platforms (A375, A38x and A39x). Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Fixes: 28da06dfd9e4 ("irqchip: armada-370-xp: Enable the PMU interrupts") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220425113706.29310-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09mmc: core: Allows to override the timeout value for ioctl() pathBean Huo1-4/+4
commit 23e09be254f95a5b75cd87f91a4014f3b46dda3f upstream. Occasionally, user-land applications initiate longer timeout values for certain commands through ioctl() system call. But so far we are still using a fixed timeout of 10 seconds in mmc_poll_for_busy() on the ioctl() path, even if a custom timeout is specified in the userspace application. This patch allows custom timeout values to override this default timeout values on the ioctl path. Cc: stable <stable@vger.kernel.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Acked-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220423221623.1074556-3-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09RDMA/hfi1: Fix potential integer multiplication overflow errorsDennis Dalessandro1-1/+1
commit f93e91a0372c922c20d5bee260b0f43b4b8a1bee upstream. When multiplying of different types, an overflow is possible even when storing the result in a larger type. This is because the conversion is done after the multiplication. So arithmetic overflow and thus in incorrect value is possible. Correct an instance of this in the inter packet delay calculation. Fix by ensuring one of the operands is u64 which will promote the other to u64 as well ensuring no overflow. Cc: stable@vger.kernel.org Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20220520183712.48973.29855.stgit@awfm-01.cornelisnetworks.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09media: coda: Add more H264 levels for CODA960Nicolas Dufresne1-3/+6
commit eb2fd187abc878a2dfad46902becb74963473c7d upstream. Add H264 level 1.0, 4.1, 4.2 to the list of supported formats. While the hardware does not fully support these levels, it does support most of them. The constraints on frame size and pixel formats already cover the limitation. This fixes negotiation of level on GStreamer 1.17.1. Cc: stable@vger.kernel.org Fixes: 42a68012e67c2 ("media: coda: add read-only h.264 decoder profile/level controls") Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09media: coda: Fix reported H264 profileNicolas Dufresne1-3/+3
commit 7110c08ea71953a7fc342f0b76046f72442cf26c upstream. The CODA960 manual states that ASO/FMO features of baseline are not supported, so for this reason this driver should only report constrained baseline support. This fixes negotiation issue with constrained baseline content on GStreamer 1.17.1. ASO/FMO features are unsupported for the encoder and untested for the decoder because there is currently no userspace support. Neither GStreamer parsers nor FFMPEG parsers support ASO/FMO. Cc: stable@vger.kernel.org Fixes: 42a68012e67c2 ("media: coda: add read-only h.264 decoder profile/level controls") Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Pascal Speck <kernel@iktek.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064NTokunori Ikegami1-8/+34
commit 0a8e98305f63deaf0a799d5cf5532cc83af035d1 upstream. Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") buffered writes fail on S29GL064N. This is because, on S29GL064N, reads return 0xFF at the end of DQ polling for write completion, where as, chip_good() check expects actual data written to the last location to be returned post DQ polling completion. Fix is to revert to using chip_good() for S29GL064N which only checks for DQ lines to settle down to determine write completion. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Cc: stable@vger.kernel.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_writeTokunori Ikegami1-63/+32
commit 083084df578a8bdb18334f69e7b32d690aaa3247 upstream. This is a preparation patch for the S29GL064N buffer writes fix. There is no functional change. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Cc: stable@vger.kernel.org Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-2-ikegami.t@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09md: fix an incorrect NULL check in md_reload_sbXiaomeng Tong1-4/+6
commit 64c54d9244a4efe9bc6e9c98e13c4bbb8bb39083 upstream. The bug is here: if (!rdev || rdev->desc_nr != nr) { The list iterator value 'rdev' will *always* be set and non-NULL by rdev_for_each_rcu(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element found (In fact, it will be a bogus pointer to an invalid struct object containing the HEAD). Otherwise it will bypass the check and lead to invalid memory access passing the check. To fix the bug, use a new variable 'iter' as the list iterator, while using the original variable 'pdev' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 70bcecdb1534 ("md-cluster: Improve md_reload_sb to be less error prone") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09md: fix an incorrect NULL check in does_sb_need_changingXiaomeng Tong1-3/+5
commit fc8738343eefc4ea8afb6122826dea48eacde514 upstream. The bug is here: if (!rdev) The list iterator value 'rdev' will *always* be set and non-NULL by rdev_for_each(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element found. Otherwise it will bypass the NULL check and lead to invalid memory access passing the check. To fix the bug, use a new variable 'iter' as the list iterator, while using the original variable 'rdev' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 2aa82191ac36 ("md-cluster: Perform a lazy update") Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09drm/i915/dsi: fix VBT send packet port selection for ICL+Jani Nikula1-11/+22
commit 0ea917819d12fed41ea4662cc26ffa0060a5c354 upstream. The VBT send packet port selection was never updated for ICL+ where the 2nd link is on port B instead of port C as in VLV+ DSI. First, single link DSI needs to use the configured port instead of relying on the VBT sequence block port. Remove the hard-coded port C check here and make it generic. For reference, see commit f915084edc5a ("drm/i915: Changes related to the sequence port no for") for the original VLV specific fix. Second, the sequence block port number is either 0 or 1, where 1 indicates the 2nd link. Remove the hard-coded port C here for 2nd link. (This could be a "find second set bit" on DSI ports, but just check the two possible options.) Third, sanity check the result with a warning to avoid a NULL pointer dereference. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984 Cc: stable@vger.kernel.org # v4.19+ Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com (cherry picked from commit 08c59dde71b73a0ac94e3ed2d431345b01f20485) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUXBrian Norris1-1/+12
commit 8fb6c44fe8468f92ac7b8bbfcca4404a4e88645f upstream. If the display is not enable()d, then we aren't holding a runtime PM reference here. Thus, it's easy to accidentally cause a hang, if user space is poking around at /dev/drm_dp_aux0 at the "wrong" time. Let's get a runtime PM reference, and check that we "see" the panel. Don't force any panel power-up, etc., because that can be intrusive, and that's not what other drivers do (see drivers/gpu/drm/bridge/ti-sn65dsi86.c and drivers/gpu/drm/bridge/parade-ps8640.c.) Fixes: 0d97ad03f422 ("drm/bridge: analogix_dp: Remove duplicated code") Cc: <stable@vger.kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220301181107.v4.1.I773a08785666ebb236917b0c8e6c05e3de471e75@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09drm/nouveau/kms/nv50-: atom: fix an incorrect NULL check on list iteratorXiaomeng Tong2-8/+25
commit 6ce4431c7ba7954c4fa6a96ce16ca1b2943e1a83 upstream. The bug is here: return encoder; The list iterator value 'encoder' will *always* be set and non-NULL by drm_for_each_encoder_mask(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element found. Otherwise it will bypass some NULL checks and lead to invalid memory access passing the check. To fix this bug, just return 'encoder' when found, otherwise return NULL. Cc: stable@vger.kernel.org Fixes: 12885ecbfe62d ("drm/nouveau/kms/nvd9-: Add CRC support") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> [Changed commit title] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220327073925.11121-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09drm/nouveau/clk: Fix an incorrect NULL check on list iteratorXiaomeng Tong1-2/+4
commit 1c3b2a27def609473ed13b1cd668cb10deab49b4 upstream. The bug is here: if (nvkm_cstate_valid(clk, cstate, max_volt, clk->temp)) return cstate; The list iterator value 'cstate' will *always* be set and non-NULL by list_for_each_entry_from_reverse(), so it is incorrect to assume that the iterator value will be unchanged if the list is empty or no element is found (In fact, it will be a bogus pointer to an invalid structure object containing the HEAD). Also it missed a NULL check at callsite and may lead to invalid memory access after that. To fix this bug, just return 'encoder' when found, otherwise return NULL. And add the NULL check. Cc: stable@vger.kernel.org Fixes: 1f7f3d91ad38a ("drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220327075824.11806-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gemLucas Stach1-0/+6
commit e168c25526cd0368af098095c2ded4a008007e1b upstream. When the mapping is already reaped the unmap must be a no-op, as we would otherwise try to remove the mapping twice, corrupting the involved data structures. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Guido Günther <agx@sigxcpu.org> Acked-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09drm/nouveau/subdev/bus: Ratelimit logging for fault errorsLyude Paul4-13/+15
commit 9887bda0c831df0c044d6de147d002e48024fb4a upstream. There's plenty of ways to fudge the GPU when developing on nouveau by mistake, some of which can result in nouveau seriously spamming dmesg with fault errors. This can be somewhat annoying, as it can quickly overrun the message buffer (or your terminal emulator's buffer) and get rid of actually useful feedback from the driver. While working on my new atomic only MST branch, I ran into this issue a couple of times. So, let's fix this by adding nvkm_error_ratelimited(), and using it to ratelimit errors from faults. This should be fine for developers, since it's nearly always only the first few faults that we care about seeing. Plus, you can turn off rate limiting in the kernel if you really need to. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20220429195350.85620-1-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.Dave Airlie1-1/+1
commit 31ab27b14daaa75541a415c6794d6f3567fea44a upstream. Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver. MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo [172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018 Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09scsi: ufs: qcom: Add a readl() to make sure ref_clk gets enabledManivannan Sadhasivam1-2/+5
commit 8eecddfca30e1651dc1c74531ed5eef21dcce7e3 upstream. In ufs_qcom_dev_ref_clk_ctrl(), it was noted that the ref_clk needs to be stable for at least 1us. Even though there is wmb() to make sure the write gets "completed", there is no guarantee that the write actually reached the UFS device. There is a good chance that the write could be stored in a Write Buffer (WB). In that case, even though the CPU waits for 1us, the ref_clk might not be stable for that period. So lets do a readl() to make sure that the previous write has reached the UFS device before udelay(). Also, the wmb() after writel_relaxed() is not really needed. Both writel() and readl() are ordered on all architectures and the CPU won't speculate instructions after readl() due to the in-built control dependency with read value on weakly ordered architectures. So it can be safely removed. Link: https://lore.kernel.org/r/20220504084212.11605-4-manivannan.sadhasivam@linaro.org Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-17 03:27:11 +0300