summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-08-03EDAC/synopsys: Re-enable the error interrupts on v3 hwSherry Sun1-22/+25
commit 4bcffe941758ee17becb43af3b25487f848f6512 upstream. zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after an interrupt for a {un-,}correctable error is raised, which disables the error interrupts. Then the interrupt handler will be called only once. Therefore, re-enable the error interrupt line at the end of intr_handler() for v3.x Synopsys EDAC DDR. Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427015137.8406-3-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03EDAC/synopsys: Use the correct register to disable the error interrupt on v3 hwSherry Sun1-2/+5
commit be76ceaf03bc04e74be5e28f608316b73c2b04ad upstream. v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register. Use the ECC Clear Register to disable the error interrupts instead. Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427015137.8406-2-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03EDAC/ghes: Set the DIMM label unconditionallyToshi Kani1-3/+8
commit 5e2805d5379619c4a2e3ae4994e73b36439f4bad upstream. The commit cb51a371d08e ("EDAC/ghes: Setup DIMM label from DMI and use it in error reports") enforced that both the bank and device strings passed to dimm_setup_label() are not NULL. However, there are BIOSes, for example on a HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019 which don't populate both strings: Handle 0x0020, DMI type 17, 84 bytes Memory Device Array Handle: 0x0013 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 32 GB Form Factor: DIMM Set: None Locator: PROC 1 DIMM 1 <===== device Bank Locator: Not Specified <===== bank This results in a buffer overflow because ghes_edac_register() calls strlen() on an uninitialized label, which had non-zero values left over from krealloc_array(): detected buffer overflow in __fortify_strlen ------------[ cut here ]------------ kernel BUG at lib/string_helpers.c:983! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1 Comm: swapper/0 Tainted: G I 5.18.6-200.fc36.x86_64 #1 Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019 RIP: 0010:fortify_panic ... Call Trace: <TASK> ghes_edac_register.cold ghes_probe platform_probe really_probe __driver_probe_device driver_probe_device __driver_attach ? __device_attach_driver bus_for_each_dev bus_add_driver driver_register acpi_ghes_init acpi_init ? acpi_sleep_proc_init do_one_initcall The label contains garbage because the commit in Fixes reallocs the DIMMs array while scanning the system but doesn't clear the newly allocated memory. Change dimm_setup_label() to always initialize the label to fix the issue. Set it to the empty string in case BIOS does not provide both bank and device so that ghes_edac_register() can keep the default label given by edac_mc_alloc_dimms(). [ bp: Rewrite commit message. ] Fixes: b9cae27728d1f ("EDAC/ghes: Scan the system once on driver init") Co-developed-by: Robert Richter <rric@kernel.org> Signed-off-by: Robert Richter <rric@kernel.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Robert Elliott <elliott@hpe.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220719220124.760359-1-toshi.kani@hpe.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03stmmac: dwmac-mediatek: fix resource leak in probeDan Carpenter1-4/+5
[ Upstream commit 4d3d3a1b244fd54629a6b7047f39a7bbc8d11910 ] If mediatek_dwmac_clks_config() fails, then call stmmac_remove_config_dt() before returning. Otherwise it is a resource leak. Fixes: fa4b3ca60e80 ("stmmac: dwmac-mediatek: fix clock issue") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YuJ4aZyMUlG6yGGa@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03net/funeth: Fix fun_xdp_tx() and XDP packet reclaimDimitris Michailidis3-15/+16
[ Upstream commit 51a83391d77bb0f7ff0aef06ca4c7f5aa9e80b4c ] The current implementation of fun_xdp_tx(), used for XPD_TX, is incorrect in that it takes an address/length pair and later releases it with page_frag_free(). It is OK for XDP_TX but the same code is used by ndo_xdp_xmit. In that case it loses the XDP memory type and releases the packet incorrectly for some of the types. Assorted breakage follows. Change fun_xdp_tx() to take xdp_frame and rely on xdp_return_frame() in reclaim. Fixes: db37bc177dae ("net/funeth: add the data path") Signed-off-by: Dimitris Michailidis <dmichail@fungible.com> Link: https://lore.kernel.org/r/20220726215923.7887-1-dmichail@fungible.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03sfc: disable softirqs for ptp TXAlejandro Lucero1-0/+22
[ Upstream commit 67c3b611d92fc238c43734878bc3e232ab570c79 ] Sending a PTP packet can imply to use the normal TX driver datapath but invoked from the driver's ptp worker. The kernel generic TX code disables softirqs and preemption before calling specific driver TX code, but the ptp worker does not. Although current ptp driver functionality does not require it, there are several reasons for doing so: 1) The invoked code is always executed with softirqs disabled for non PTP packets. 2) Better if a ptp packet transmission is not interrupted by softirq handling which could lead to high latencies. 3) netdev_xmit_more used by the TX code requires preemption to be disabled. Indeed a solution for dealing with kernel preemption state based on static kernel configuration is not possible since the introduction of dynamic preemption level configuration at boot time using the static calls functionality. Fixes: f79c957a0b537 ("drivers: net: sfc: use netdev_xmit_more helper") Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03virtio-net: fix the race between refill work and closeJason Wang1-3/+34
[ Upstream commit 5a159128faff151b7fe5f4eb0f310b1e0a2d56bf ] We try using cancel_delayed_work_sync() to prevent the work from enabling NAPI. This is insufficient since we don't disable the source of the refill work scheduling. This means an NAPI poll callback after cancel_delayed_work_sync() can schedule the refill work then can re-enable the NAPI that leads to use-after-free [1]. Since the work can enable NAPI, we can't simply disable NAPI before calling cancel_delayed_work_sync(). So fix this by introducing a dedicated boolean to control whether or not the work could be scheduled from NAPI. [1] ================================================================== BUG: KASAN: use-after-free in refill_work+0x43/0xd4 Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42 CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events refill_work Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0xbb/0x6ac ? _printk+0xad/0xde ? refill_work+0x43/0xd4 kasan_report+0xa8/0x130 ? refill_work+0x43/0xd4 refill_work+0x43/0xd4 process_one_work+0x43d/0x780 worker_thread+0x2a0/0x6f0 ? process_one_work+0x780/0x780 kthread+0x167/0x1a0 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> ... Fixes: b2baed69e605c ("virtio_net: set/cancel work on ndo_open/ndo_stop") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03scsi: ufs: core: Fix a race condition related to device managementBart Van Assche1-18/+40
[ Upstream commit f5c2976e0cb0f6236013bfb479868531b04f61d4 ] If a device management command completion happens after wait_for_completion_timeout() times out and before ufshcd_clear_cmds() is called, then the completion code may crash on the complete() call in __ufshcd_transfer_req_compl(). Fix the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: complete+0x64/0x178 __ufshcd_transfer_req_compl+0x30c/0x9c0 ufshcd_poll+0xf0/0x208 ufshcd_sl_intr+0xb8/0xf0 ufshcd_intr+0x168/0x2f4 __handle_irq_event_percpu+0xa0/0x30c handle_irq_event+0x84/0x178 handle_fasteoi_irq+0x150/0x2e8 __handle_domain_irq+0x114/0x1e4 gic_handle_irq.31846+0x58/0x300 el1_irq+0xe4/0x1c0 efi_header_end+0x110/0x680 __irq_exit_rcu+0x108/0x124 __handle_domain_irq+0x118/0x1e4 gic_handle_irq.31846+0x58/0x300 el1_irq+0xe4/0x1c0 cpuidle_enter_state+0x3ac/0x8c4 do_idle+0x2fc/0x55c cpu_startup_entry+0x84/0x90 kernel_init+0x0/0x310 start_kernel+0x0/0x608 start_kernel+0x4ec/0x608 Link: https://lore.kernel.org/r/20220720170228.1598842-1-bvanassche@acm.org Fixes: 5a0b0cb9bee7 ("[SCSI] ufs: Add support for sending NOP OUT UPIU") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03scsi: ufs: Support clearing multiple commands at onceBart Van Assche1-14/+28
[ Upstream commit d1a7644648b7cdacaf8d1013a4285001911e9bc8 ] Modify ufshcd_clear_cmd() such that it supports clearing multiple commands at once instead of one command at a time. This change will be used in a later patch to reduce the time spent in the reset handler. Link: https://lore.kernel.org/r/20220613214442.212466-3-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03octeontx2-pf: cn10k: Fix egress ratelimit configurationSunil Goutham1-21/+55
[ Upstream commit b354eaeec8637d87003945439209251d76a2bb95 ] NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K. Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64. Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03i40e: Fix interface init with MSI interrupts (no MSI-X)Michal Maloszewski1-0/+4
[ Upstream commit 5fcbb711024aac6d4db385623e6f2fdf019f7782 ] Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03net: macsec: fix potential resource leak in macsec_add_rxsa() and ↵Jianglei Nie1-2/+2
macsec_add_txsa() [ Upstream commit c7b205fbbf3cffa374721bb7623f7aa8c46074f1 ] init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa-> key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error occurs after init_rx_sa() is called in macsec_add_rxsa(), the function released rx_sa with kfree() without releasing rx_sa->stats and rx_sa-> key.tfm, which will lead to a resource leak. We should call macsec_rxsa_put() instead of kfree() to decrease the ref count of rx_sa and release the relevant resource if the refcount is 0. The same bug exists in macsec_add_txsa() for tx_sa as well. This patch fixes the above two bugs. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03macsec: always read MACSEC_SA_ATTR_PN as a u64Sabrina Dubroca1-3/+3
[ Upstream commit c630d1fe6219769049c87d1a6a0e9a6de55328a1 ] Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a u32, sometimes forced into a u64 without checking the actual length of the attribute. Instead, we can use nla_get_u64 everywhere, which will read up to 64 bits into a u64, capped by the actual length of the attribute coming from userspace. This fixes several issues: - the check in validate_add_rxsa doesn't work with 32-bit attributes - the checks in validate_add_txsa and validate_upd_sa incorrectly reject X << 32 (with X != 0) Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03macsec: limit replay window size with XPNSabrina Dubroca1-4/+12
[ Upstream commit b07a0e2044057f201d694ab474f5c42a02b6465b ] IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value of the replay window is 2^30-1, to help with recovery of the upper bits of the PN. To avoid leaving the existing macsec device in an inconsistent state if this test fails during changelink, reuse the cleanup mechanism introduced for HW offload. This wasn't needed until now because macsec_changelink_common could not fail during changelink, as modifying the cipher suite was not allowed. Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so that secy->xpn is set. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03macsec: fix error message in macsec_add_rxsa and _txsaSabrina Dubroca1-2/+2
[ Upstream commit 3240eac4ff20e51b87600dbd586ed814daf313db ] The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03macsec: fix NULL deref in macsec_add_rxsaSabrina Dubroca1-1/+2
[ Upstream commit f46040eeaf2e523a4096199fd93a11e794818009 ] Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but nothing guarantees that it's not NULL at this point. The same code was added to macsec_add_txsa, but there it's not a problem because validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is present. Note: it's not possible to reproduce with iproute, because iproute doesn't allow creating an SA without specifying the PN. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315 Reported-by: Frantisek Sumsal <fsumsal@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03mlxsw: spectrum_router: simplify list unwindingTom Rix1-12/+8
[ Upstream commit 6f2f36e5f932c58e370bff79aba7f05963ea1c2a ] The setting of i here err_nexthop6_group_get: i = nrt6; Is redundant, i is already nrt6. So remove this statement. The for loop for the unwinding err_rt6_create: for (i--; i >= 0; i--) { Is equivelent to for (; i > 0; i--) { Two consecutive labels can be reduced to one. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220402121516.2750284-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03net: sungem_phy: Add of_node_put() for reference returned by of_get_parent()Liang He1-0/+1
[ Upstream commit ebbbe23fdf6070e31509638df3321688358cc211 ] In bcm5421_init(), we should call of_node_put() for the reference returned by of_get_parent() which has increased the refcount. Fixes: 3c326fe9cb7a ("[PATCH] ppc64: Add new PHY to sungem") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220720131003.1287426-1-windhl@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03net: pcs: xpcs: propagate xpcs_read error to xpcs_get_state_c37_sgmiiVladimir Oltean1-1/+1
[ Upstream commit 27161db0904ee48e59140aa8d0835939a666c1f1 ] While phylink_pcs_ops :: pcs_get_state does return void, xpcs_get_state() does check for a non-zero return code from xpcs_get_state_c37_sgmii() and prints that as a message to the kernel log. However, a non-zero return code from xpcs_read() is translated into "return false" (i.e. zero as int) and the I/O error is therefore not printed. Fix that. Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220720112057.3504398-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03scsi: mpt3sas: Stop fw fault watchdog work item during system shutdownDavid Jeffery1-0/+1
commit 0fde22c5420ed258ee538a760291c2f3935f6a01 upstream. During system shutdown or reboot, mpt3sas will reset the firmware back to ready state. However, the driver leaves running a watchdog work item intended to keep the firmware in operational state. This causes a second, unneeded reset on shutdown and moves the firmware back to operational instead of in ready state as intended. And if the mpt3sas_fwfault_debug module parameter is set, this extra reset also panics the system. mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the firmware back to ready state. Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com Fixes: fae21608c31c ("scsi: mpt3sas: Transition IOC to Ready state during shutdown") Tested-by: Laurence Oberman <loberman@redhat.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03scsi: core: Fix warning in scsi_alloc_sgtables()Jason Yan1-1/+1
commit d9a434fa0c12ed5f7afe1e9dd30003ab5d059b85 upstream. As explained in SG_IO howto[1]: "If iovec_count is non-zero then 'dxfer_len' should be equal to the sum of iov_len lengths. If not, the minimum of the two is the transfer length." When iovec_count is non-zero and dxfer_len is zero, the sg_io() just genarated a null bio, and finally caused a warning below. To fix it, skip generating a bio for this request if dxfer_len is zero. [1] https://tldp.org/HOWTO/SCSI-Generic-HOWTO/x198.html WARNING: CPU: 2 PID: 3643 at drivers/scsi/scsi_lib.c:1032 scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032 Modules linked in: CPU: 2 PID: 3643 Comm: syz-executor397 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-204/01/2014 RIP: 0010:scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032 Code: e7 fc 31 ff 44 89 f6 e8 c1 4e e7 fc 45 85 f6 0f 84 1a f5 ff ff e8 93 4c e7 fc 83 c5 01 0f b7 ed e9 0f f5 ff ff e8 83 4c e7 fc <0f> 0b 41 bc 0a 00 00 00 e9 2b fb ff ff 41 bc 09 00 00 00 e9 20 fb RSP: 0018:ffffc90000d07558 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88801bfc96a0 RCX: 0000000000000000 RDX: ffff88801c876000 RSI: ffffffff849060bd RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff849055b9 R11: 0000000000000000 R12: ffff888012b8c000 R13: ffff88801bfc9580 R14: 0000000000000000 R15: ffff88801432c000 FS: 00007effdec8e700(0000) GS:ffff88802cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007effdec6d718 CR3: 00000000206d6000 CR4: 0000000000150ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> scsi_setup_scsi_cmnd drivers/scsi/scsi_lib.c:1219 [inline] scsi_prepare_cmd drivers/scsi/scsi_lib.c:1614 [inline] scsi_queue_rq+0x283e/0x3630 drivers/scsi/scsi_lib.c:1730 blk_mq_dispatch_rq_list+0x6ea/0x22e0 block/blk-mq.c:1851 __blk_mq_sched_dispatch_requests+0x20b/0x410 block/blk-mq-sched.c:299 blk_mq_sched_dispatch_requests+0xfb/0x180 block/blk-mq-sched.c:332 __blk_mq_run_hw_queue+0xf9/0x350 block/blk-mq.c:1968 __blk_mq_delay_run_hw_queue+0x5b6/0x6c0 block/blk-mq.c:2045 blk_mq_run_hw_queue+0x30f/0x480 block/blk-mq.c:2096 blk_mq_sched_insert_request+0x340/0x440 block/blk-mq-sched.c:451 blk_execute_rq+0xcc/0x340 block/blk-mq.c:1231 sg_io+0x67c/0x1210 drivers/scsi/scsi_ioctl.c:485 scsi_ioctl_sg_io drivers/scsi/scsi_ioctl.c:866 [inline] scsi_ioctl+0xa66/0x1560 drivers/scsi/scsi_ioctl.c:921 sd_ioctl+0x199/0x2a0 drivers/scsi/sd.c:1576 blkdev_ioctl+0x37a/0x800 block/ioctl.c:588 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7effdecdc5d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 81 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007effdec8e2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007effded664c0 RCX: 00007effdecdc5d9 RDX: 0000000020002300 RSI: 0000000000002285 RDI: 0000000000000004 RBP: 00007effded34034 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 00007effded34054 R14: 2f30656c69662f2e R15: 00007effded664c8 Link: https://lore.kernel.org/r/20220720025120.3226770-1-yanaijie@huawei.com Fixes: 25636e282fe9 ("block: fix SG_IO vector request data length handling") Reported-by: syzbot+d44b35ecfb807e5af0b5@syzkaller.appspotmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03octeontx2-pf: Fix UDP/TCP src and dst port tc filtersSubbaraya Sundeep1-12/+18
commit 59e1be6f83b928a04189bbf3ab683a1fc6248db3 upstream. Check the mask for non-zero value before installing tc filters for L4 source and destination ports. Otherwise installing a filter for source port installs destination port too and vice-versa. Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03scsi: ufs: host: Hold reference returned by of_parse_phandle()Liang He1-2/+13
commit a3435afba87dc6cd83f5595e7607f3c40f93ef01 upstream. In ufshcd_populate_vreg(), we should hold the reference returned by of_parse_phandle() and then use it to call of_node_put() for refcount balance. Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com Fixes: aa4976130934 ("ufs: Add regulator enable support") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03ice: Fix VSIs unable to share unicast MACAnirudh Venkataramanan2-40/+2
commit 5c8e3c7ff3e7bd7b938659be704f75cc746b697f upstream. The driver currently does not allow two VSIs in the same PF domain to have the same unicast MAC address. This is incorrect in the sense that a policy decision is being made in the driver when it must be left to the user. This approach was causing issues when rebooting the system with VFs spawned not being able to change their MAC addresses. Such errors were present in dmesg: [ 7921.068237] ice 0000:b6:00.2 ens2f2: Unicast MAC 6a:0d:e4:70:ca:d1 already exists on this PF. Preventing setting VF 7 unicast MAC address to 6a:0d:e4:70:ca:d1 Fix that by removing this restriction. Doing this also allows us to remove some additional code that's checking if a unicast MAC filter already exists. Fixes: 47ebc7b02485 ("ice: Check if unicast MAC exists before setting VF MAC") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03ice: do not setup vlan for loopback VSIMaciej Fijalkowski1-3/+5
commit cc019545a238518fa9da1e2a889f6e1bb1005a63 upstream. Currently loopback test is failiing due to the error returned from ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)Maciej Fijalkowski1-1/+2
commit 283d736ff7c7e96ac5b32c6c0de40372f8eb171e upstream. Tx side sets EOP and RS bits on descriptors to indicate that a particular descriptor is the last one and needs to generate an irq when it was sent. These bits should not be checked on completion path regardless whether it's the Tx or the Rx. DD bit serves this purpose and it indicates that a particular descriptor is either for Rx or was successfully Txed. EOF is also set as loopback test does not xmit fragmented frames. Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead of EOP and RS pair. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03ice: Fix max VLANs available for VFPrzemyslaw Patynowski1-1/+2
commit 1e308c6fb7127371f48a0fb9770ea0b30a6b5698 upstream. Legacy VLAN implementation allows for untrusted VF to have 8 VLAN filters, not counting VLAN 0 filters. Current VLAN_V2 implementation lowers available filters for VF, by counting in VLAN 0 filter for both TPIDs. Fix this by counting only non zero VLAN filters. Without this patch, untrusted VF would not be able to access 8 VLAN filters. Fixes: cc71de8fa133 ("ice: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()Nathan Chancellor1-1/+1
commit 0c09bc33aa8e9dc867300acaadc318c2f0d85a1e upstream. When booting a kernel compiled with clang's CFI protection (CONFIG_CFI_CLANG), there is a CFI failure in drm_simple_kms_crtc_mode_valid() when trying to call simpledrm_simple_display_pipe_mode_valid() through ->mode_valid(): [ 0.322802] CFI failure (target: simpledrm_simple_display_pipe_mode_valid+0x0/0x8): ... [ 0.324928] Call trace: [ 0.324969] __ubsan_handle_cfi_check_fail+0x58/0x60 [ 0.325053] __cfi_check_fail+0x3c/0x44 [ 0.325120] __cfi_slowpath_diag+0x178/0x200 [ 0.325192] drm_simple_kms_crtc_mode_valid+0x58/0x80 [ 0.325279] __drm_helper_update_and_validate+0x31c/0x464 ... The ->mode_valid() member in 'struct drm_simple_display_pipe_funcs' expects a return type of 'enum drm_mode_status', not 'int'. Correct it to fix the CFI failure. Cc: stable@vger.kernel.org Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1647 Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220725233629.223223-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03nouveau/svm: Fix to migrate all requested pagesAlistair Popple1-1/+5
commit 66cee9097e2b74ff3c8cc040ce5717c521a0c3fa upstream. Users may request that pages from an OpenCL SVM allocation be migrated to the GPU with clEnqueueSVMMigrateMem(). In Nouveau this will call into nouveau_dmem_migrate_vma() to do the migration. If the total range to be migrated exceeds SG_MAX_SINGLE_ALLOC the pages will be migrated in chunks of size SG_MAX_SINGLE_ALLOC. However a typo in updating the starting address means that only the first chunk will get migrated. Fix the calculation so that the entire range will get migrated if possible. Signed-off-by: Alistair Popple <apopple@nvidia.com> Fixes: e3d8b0890469 ("drm/nouveau/svm: map pages after migration") Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220720062745.960701-1-apopple@nvidia.com Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03intel_idle: Fix false positive RCU splats due to incorrect hardirqs stateWaiman Long1-1/+7
commit d295ad34f236c3518634fb6403d4c0160456e470 upstream. Commit 32d4fd5751ea ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE") uses raw_local_irq_enable/local_irq_disable() around call to __intel_idle() in intel_idle_irq(). With interrupt enabled, timer tick interrupt can happen and a subsequently call to __do_softirq() may change the lockdep hardirqs state of a debug kernel back to 'on'. This will result in a mismatch between the cpu hardirqs state (off) and the lockdep hardirqs state (on) causing a number of false positive "WARNING: suspicious RCU usage" splats. Fix that by using local_irq_disable() to disable interrupt in intel_idle_irq(). Fixes: 32d4fd5751ea ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE") Signed-off-by: Waiman Long <longman@redhat.com> Cc: 5.16+ <stable@vger.kernel.org> # 5.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29crypto: qat - re-enable registration of algorithmsGiovanni Cabiddu2-14/+0
[ Upstream commit d09144745959bf7852ccafd73243dd7d1eaeb163 ] Re-enable the registration of algorithms after fixes to (1) use pre-allocated buffers in the datapath and (2) support the CRYPTO_TFM_REQ_MAY_BACKLOG flag. This reverts commit 8893d27ffcaf6ec6267038a177cb87bcde4dd3de. Cc: stable@vger.kernel.org Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Marco Chiappero <marco.chiappero@intel.com> Reviewed-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29crypto: qat - add param check for DHGiovanni Cabiddu1-0/+4
[ Upstream commit 2acbb8771f6ac82422886e63832ee7a0f4b1635b ] Reject requests with a source buffer that is bigger than the size of the key. This is to prevent a possible integer underflow that might happen when copying the source scatterlist into a linear buffer. Cc: stable@vger.kernel.org Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29crypto: qat - add param check for RSAGiovanni Cabiddu1-0/+8
[ Upstream commit 9714061423b8b24b8afb31b8eb4df977c63f19c4 ] Reject requests with a source buffer that is bigger than the size of the key. This is to prevent a possible integer underflow that might happen when copying the source scatterlist into a linear buffer. Cc: stable@vger.kernel.org Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29crypto: qat - remove dma_free_coherent() for DHGiovanni Cabiddu1-49/+34
[ Upstream commit 029aa4624a7fe35233bdd3d1354dc7be260380bf ] The functions qat_dh_compute_value() allocates memory with dma_alloc_coherent() if the source or the destination buffers are made of multiple flat buffers or of a size that is not compatible with the hardware. This memory is then freed with dma_free_coherent() in the context of a tasklet invoked to handle the response for the corresponding request. According to Documentation/core-api/dma-api-howto.rst, the function dma_free_coherent() cannot be called in an interrupt context. Replace allocations with dma_alloc_coherent() in the function qat_dh_compute_value() with kmalloc() + dma_map_single(). Cc: stable@vger.kernel.org Fixes: c9839143ebbf ("crypto: qat - Add DH support") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29crypto: qat - remove dma_free_coherent() for RSAGiovanni Cabiddu1-77/+60
[ Upstream commit 3dfaf0071ed74d7a9c6b3c9ea4df7a6f8e423c2a ] After commit f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP"), if the algorithms are enabled, the driver crashes with a BUG_ON while executing vunmap() in the context of a tasklet. This is due to the fact that the function dma_free_coherent() cannot be called in an interrupt context (see Documentation/core-api/dma-api-howto.rst). The functions qat_rsa_enc() and qat_rsa_dec() allocate memory with dma_alloc_coherent() if the source or the destination buffers are made of multiple flat buffers or of a size that is not compatible with the hardware. This memory is then freed with dma_free_coherent() in the context of a tasklet invoked to handle the response for the corresponding request. Replace allocations with dma_alloc_coherent() in the functions qat_rsa_enc() and qat_rsa_dec() with kmalloc() + dma_map_single(). Cc: stable@vger.kernel.org Fixes: a990532023b9 ("crypto: qat - Add support for RSA algorithm") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29crypto: qat - fix memory leak in RSAGiovanni Cabiddu1-11/+1
[ Upstream commit 80a52e1ee7757b742f96bfb0d58f0c14eb6583d0 ] When an RSA key represented in form 2 (as defined in PKCS #1 V2.1) is used, some components of the private key persist even after the TFM is released. Replace the explicit calls to free the buffers in qat_rsa_exit_tfm() with a call to qat_rsa_clear_ctx() which frees all buffers referenced in the TFM context. Cc: stable@vger.kernel.org Fixes: 879f77e9071f ("crypto: qat - Add RSA CRT mode") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29crypto: qat - add backlog mechanismGiovanni Cabiddu9-18/+123
[ Upstream commit 38682383973280e5be2802ba8a8d4a636d36cb19 ] The implementations of the crypto algorithms (aead, skcipher, etc) in the QAT driver do not properly support requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set. If the HW queue is full, the driver returns -EBUSY but does not enqueue the request. This can result in applications like dm-crypt waiting indefinitely for the completion of a request that was never submitted to the hardware. Fix this by adding a software backlog queue: if the ring buffer is more than eighty percent full, then the request is enqueued to a backlog list and the error code -EBUSY is returned back to the caller. Requests in the backlog queue are resubmitted at a later time, in the context of the callback of a previously submitted request. The request for which -EBUSY is returned is then marked as -EINPROGRESS once submitted to the HW queues. The submission loop inside the function qat_alg_send_message() has been modified to decide which submission policy to use based on the request flags. If the request does not have the CRYPTO_TFM_REQ_MAY_BACKLOG set, the previous behaviour has been preserved. Based on a patch by Vishnu Das Ramachandran <vishnu.dasx.ramachandran@intel.com> Cc: stable@vger.kernel.org Fixes: d370cec32194 ("crypto: qat - Intel(R) QAT crypto interface") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Kyle Sanderson <kyle.leet@gmail.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Marco Chiappero <marco.chiappero@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29crypto: qat - refactor submission logicGiovanni Cabiddu6-54/+101
[ Upstream commit af88d3c109aa5edfaa11c9a26d9c0ff21ddf501c ] All the algorithms in qat_algs.c and qat_asym_algs.c use the same pattern to submit messages to the HW queues. Move the submission loop to a new function, qat_alg_send_message(), and share it between the symmetric and the asymmetric algorithms. As part of this rework, since the number of retries before returning an error is inconsistent between the symmetric and asymmetric implementations, set it to a value that works for both (i.e. 20, was 10 in qat_algs.c and 100 in qat_asym_algs.c) In addition fix the return code reported when the HW queues are full. In that case return -ENOSPC instead of -EBUSY. Including stable in CC since (1) the error code returned if the HW queues are full is incorrect and (2) to facilitate the backport of the next fix "crypto: qat - add backlog mechanism". Cc: stable@vger.kernel.org Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Marco Chiappero <marco.chiappero@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29crypto: qat - use pre-allocated buffers in datapathGiovanni Cabiddu2-27/+61
[ Upstream commit e0831e7af4e03f2715de102e18e9179ec0a81562 ] In order to do DMAs, the QAT device requires that the scatterlist structures are mapped and translated into a format that the firmware can understand. This is defined as the composition of a scatter gather list (SGL) descriptor header, the struct qat_alg_buf_list, plus a variable number of flat buffer descriptors, the struct qat_alg_buf. The allocation and mapping of these data structures is done each time a request is received from the skcipher and aead APIs. In an OOM situation, this behaviour might lead to a dead-lock if an allocation fails. Based on the conversation in [1], increase the size of the aead and skcipher request contexts to include an SGL descriptor that can handle a maximum of 4 flat buffers. If requests exceed 4 entries buffers, memory is allocated dynamically. [1] https://lore.kernel.org/linux-crypto/20200722072932.GA27544@gondor.apana.org.au/ Cc: stable@vger.kernel.org Fixes: d370cec32194 ("crypto: qat - Intel(R) QAT crypto interface") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Marco Chiappero <marco.chiappero@intel.com> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29crypto: qat - set to zero DH parameters before freeGiovanni Cabiddu1-0/+3
[ Upstream commit 1731160ff7c7bbb11bb1aacb14dd25e18d522779 ] Set to zero the context buffers containing the DH key before they are freed. This is a defense in depth measure that avoids keys to be recovered from memory in case the system is compromised between the free of the buffer and when that area of memory (containing keys) gets overwritten. Cc: stable@vger.kernel.org Fixes: c9839143ebbf ("crypto: qat - Add DH support") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29clk: lan966x: Fix the lan966x clock gate register addressHerve Codina1-1/+1
commit 25c2a075eb6a3031813b6051bd10dfc22c36a2a4 upstream. The register address used for the clock gate register is the base register address coming from first reg map (ie. the generic clock registers) instead of the second reg map defining the clock gate register. Use the correct clock gate register address. Fixes: 5ad5915dea00 ("clk: lan966x: Extend lan966x clock driver for clock gating support") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20220704102845.168438-2-herve.codina@bootlin.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA ↵Marc Kleine-Budde1-4/+8
transfers commit 4ceaa684459d414992acbefb4e4c31f2dfc50641 upstream. In case a IRQ based transfer times out the bcm2835_spi_handle_err() function is called. Since commit 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") the TX and RX DMA transfers are unconditionally canceled, leading to NULL pointer derefs if ctlr->dma_tx or ctlr->dma_rx are not set. Fix the NULL pointer deref by checking that ctlr->dma_tx and ctlr->dma_rx are valid pointers before accessing them. Fixes: 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20220719072234.2782764-1-mkl@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29gpio: gpio-xilinx: Fix integer overflowSrinivas Neeli1-1/+1
[ Upstream commit 32c094a09d5829ad9b02cdf667569aefa8de0ea6 ] Current implementation is not able to configure more than 32 pins due to incorrect data type. So type casting with unsigned long to avoid it. Fixes: 02b3f84d9080 ("xilinx: Switch to use bitmap APIs") Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29tcp: Fix data-races around sysctl knobs related to SYN option.Kuniyuki Iwashima1-3/+3
[ Upstream commit 3666f666e99600518ab20982af04a078bbdad277 ] While reading these knobs, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - tcp_sack - tcp_window_scaling - tcp_timestamps Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.Kuniyuki Iwashima1-1/+1
[ Upstream commit 8895a9c2ac76fb9d3922fed4fe092c8ec5e5cccc ] While reading sysctl_fib_multipath_hash_fields, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: ce5c9c20d364 ("ipv4: Add a sysctl to control multipath hash fields") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.Kuniyuki Iwashima1-1/+1
[ Upstream commit 7998c12a08c97cc26660532c9f90a34bd7d8da5a ] While reading sysctl_fib_multipath_hash_policy, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: bf4e0a3db97e ("net: ipv4: add support for ECMP hash policy choice") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()Liang He1-0/+1
[ Upstream commit 7b66dfcc6e1e1f018492619c3d0fc432b6b54272 ] We should use of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. Fixes: 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Link: https://lore.kernel.org/all/20220712095623.364287-1-windhl@126.com Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29drm/imx/dcss: Add missing of_node_put() in fail pathLiang He1-0/+3
[ Upstream commit 02c87df2480ac855d88ee308ce3fa857d9bd55a8 ] In dcss_dev_create() and dcss_dev_destroy(), we should call of_node_put() in fail path or before the dcss's destroy as of_graph_get_port_by_id() has increased the refcount. Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220714081337.374761-1-windhl@126.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29drm/panel-edp: Fix variable typo when saving hpd absent delay from DTNícolas F. R. A. Prado1-1/+1
[ Upstream commit ef2084a8388b19c8812356106e0c8d29915f9d8b ] The value read from the "hpd-absent-delay-ms" property in DT was being saved to the wrong variable, overriding the hpd_reliable delay. Fix the typo. Fixes: 5540cf8f3e8d ("drm/panel-edp: Implement generic "edp-panel"s probed by EDID") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: André Almeida <andrealmeid@igalia.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220719203857.1488831-4-nfraprado@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29amt: do not use amt->nr_tunnels outside of lockTaehee Yoo1-3/+6
[ Upstream commit 989918482bbccbbce3ba2bb9156eb4c193319983 ] amt->nr_tunnels is protected by amt->lock. But, amt_request_handler() has been using this variable without the amt->lock. So, it expands context of amt->lock in the amt_request_handler() to protect amt->nr_tunnels variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 12:43:21 +0300