summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-05-09tty: n_gsm: fix sometimes uninitialized warning in gsm_dlci_modem_output()Daniel Starke1-6/+9
commit 19317433057dc1f2ca9a975e4e6b547282c2a5ef upstream. 'size' may be used uninitialized in gsm_dlci_modem_output() if called with an adaption that is neither 1 nor 2. The function is currently only called by gsm_modem_upd_via_data() and only for adaption 2. Properly handle every invalid case by returning -EINVAL to silence the compiler warning and avoid future regressions. Fixes: c19ffe00fed6 ("tty: n_gsm: fix invalid use of MSC in advanced option") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220425104726.7986-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix software flow control handlingDaniel Starke1-0/+16
commit f4f7d63287217ba25e5c80f5faae5e4f7118790e upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.8.1 states that XON/XOFF characters shall be used instead of Fcon/Fcoff command in advanced option mode to handle flow control. Chapter 5.4.8.2 describes how XON/XOFF characters shall be handled. Basic option mode only used Fcon/Fcoff commands and no XON/XOFF characters. These are treated as data bytes here. The current implementation uses the gsm_mux field 'constipated' to handle flow control from the remote peer and the gsm_dlci field 'constipated' to handle flow control from each DLCI. The later is unrelated to this patch. The gsm_mux field is correctly set for Fcon/Fcoff commands in gsm_control_message(). However, the same is not true for XON/XOFF characters in gsm1_receive(). Disable software flow control handling in the tty to allow explicit handling by n_gsm. Add the missing handling in advanced option mode for gsm_mux in gsm1_receive() to comply with the standard. This patch depends on the following commit: Commit 8838b2af23ca ("tty: n_gsm: fix SW flow control encoding/handling") Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220422071025.5490-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix invalid use of MSC in advanced optionDaniel Starke1-8/+117
commit c19ffe00fed6bb423d81406d2a7e5793074c7d83 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.7 states that the Modem Status Command (MSC) shall only be used if the basic option was chosen. The current implementation uses MSC frames even if advanced option was chosen to inform the peer about modem line state updates. A standard conform peer may choose to discard these frames in advanced option mode. Furthermore, gsmtty_modem_update() is not part of the 'tty_operations' functions despite its name. Rename gsmtty_modem_update() to gsm_modem_update() to clarify this. Split its function into gsm_modem_upd_via_data() and gsm_modem_upd_via_msc() depending on the encoding and adaption. Introduce gsm_dlci_modem_output() as adaption of gsm_dlci_data_output() to encode and queue empty frames in advanced option mode. Use it in gsm_modem_upd_via_data(). gsm_modem_upd_via_msc() is based on the initial gsmtty_modem_update() function which used only MSC frames to update modem states. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220422071025.5490-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix broken virtual tty handlingDaniel Starke1-72/+15
commit a8c5b8255f8a9acd58a4b15ff1c14cd6effd114b upstream. Dynamic virtual tty registration was introduced to allow the user to handle these cases with uevent rules. The following commits relate to this: Commit 5b87686e3203 ("tty: n_gsm: Modify gsmtty driver register method when config requester") Commit 0b91b5332368 ("tty: n_gsm: Save dlci address open status when config requester") Commit 46292622ad73 ("tty: n_gsm: clean up indenting in gsm_queue()") However, the following behavior can be seen with this implementation: - n_gsm ldisc is activated via ioctl - all configuration parameters are set to their default value (initiator=0) - the mux gets activated and attached and gsmtty0 is being registered in in gsm_dlci_open() after DLCI 0 was established (DLCI 0 is the control channel) - the user configures n_gsm via ioctl GSMIOC_SETCONF as initiator - this re-attaches the n_gsm mux - no new gsmtty devices are registered in gsmld_attach_gsm() because the mux is already active - the initiator side registered only the control channel as gsmtty0 (which should never happen) and no user channel tty The commits above make it impossible to operate the initiator side as no user channel tty is or will be available. On the other hand, this behavior will make it also impossible to allow DLCI parameter negotiation on responder side in the future. The responder side first needs to provide a device for the application before the application can set its parameters of the associated DLCI via ioctl. Note that the user application is still able to detect a link establishment without relaying to uevent by waiting for DTR open on responder side. This is the same behavior as on a physical serial interface. And on initiator side a tty hangup can be detected if a link establishment request failed. Revert the commits above completely to always register all user channels and no control channel after mux attachment. No other changes are made. Fixes: 5b87686e3203 ("tty: n_gsm: Modify gsmtty driver register method when config requester") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220422071025.5490-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix missing update of modem controls after DLCI openDaniel Starke1-0/+4
commit 48473802506d2d6151f59e0e764932b33b53cb3b upstream. Currently the peer is not informed about the initial state of the modem control lines after a new DLCI has been opened. Fix this by sending the initial modem control line states after DLCI open. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220420101346.3315-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix incorrect UA handlingDaniel Starke1-1/+0
commit ff9166c623704337bd6fe66fce2838d9768a6634 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.4.2 states that any received unnumbered acknowledgment (UA) with its poll/final (PF) bit set to 0 shall be discarded. Currently, all UA frame are handled in the same way regardless of the PF bit. This does not comply with the standard. Remove the UA case in gsm_queue() to process only UA frames with PF bit set to 1 to abide the standard. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-20-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix reset fifo race conditionDaniel Starke1-0/+8
commit 73029a4d7161f8b6c0934553145ef574d2d0c645 upstream. gsmtty_write() and gsm_dlci_data_output() properly guard the fifo access. However, gsm_dlci_close() and gsmtty_flush_buffer() modifies the fifo but do not guard this. Add a guard here to prevent race conditions on parallel writes to the fifo. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-17-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix missing tty wakeup in convergence layer type 2Daniel Starke1-0/+1
commit 1adf6fee58ca25fb6720b8d34c919dcf5425cc9c upstream. gsm_control_modem() informs the virtual tty that more data can be written after receiving a control signal octet via modem status command (MSC). However, gsm_dlci_data() fails to do the same after receiving a control signal octet from the convergence layer type 2 header. Add tty_wakeup() in gsm_dlci_data() for convergence layer type 2 to fix this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-14-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix wrong signal octets encoding in MSCDaniel Starke1-13/+5
commit 317f86af7f5d19f286ed2d181cbaef4a188c7f19 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. The value of the modem status command (MSC) frame contains an address field, control signal and optional break signal octet. The address field is encoded as described in chapter 5.2.1.2 with only one octet (may be extended to more in future versions of the standard). Whereas the control signal and break signal octet are always one byte each. This is strange at first glance as it makes the EA bit redundant. However, the same two octets are also encoded as header in convergence layer type 2 as described in chapter 5.5.2. No header length field is given and the only way to test if there is an optional break signal octet is via the EA flag which extends the control signal octet with a break signal octet. Now it becomes obvious how the EA bit for those two octets shall be encoded in the MSC frame. The current implementation treats the signal octet different for MSC frame and convergence layer type 2 header even though the standard describes it for both in the same way. Use the EA bit to encode the signal octets not only in the convergence layer type 2 header but also in the MSC frame in the same way with either 1 or 2 bytes in case of an optional break signal. Adjust the receiving path accordingly in gsm_control_modem(). Fixes: 3ac06b905655 ("tty: n_gsm: Fix for modems with brk in modem status control") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-13-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix wrong command frame length field encodingDaniel Starke1-12/+11
commit 398867f59f956985f4c324f173eff7b946e14bd8 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall be made up from type, length and value. Looking for example in chapter 5.4.6.3.5 at the description for the encoding of a flow control on command it becomes obvious, that the type and length field is always present whereas the value may be zero bytes long. The current implementation omits the length field if the value is not present. This is wrong. Correct this by always sending the length in gsm_control_transmit(). So far only the modem status command (MSC) has included a value and encoded its length directly. Therefore, also change gsmtty_modem_update(). Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix wrong command retry handlingDaniel Starke1-3/+3
commit d0bcdffcad5a22f202e3bf37190c0dd8c080ea92 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.3 states that the valid range for the maximum number of retransmissions (N2) is from 0 to 255 (both including). gsm_config() fails to limit this range correctly. Furthermore, gsm_control_retransmit() handles this number incorrectly by performing N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255 retransmission attempts. Fix the range check in gsm_config() and the value handling in gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix missing explicit ldisc flushDaniel Starke1-0/+1
commit 17eac652028501df7ea296b1d9b9c134db262b7d upstream. In gsm_cleanup_mux() the muxer is closed down and all queues are removed. However, removing the queues is done without explicit control of the underlying buffers. Flush those before freeing up our queues to ensure that all outgoing queues are cleared consistently. Otherwise, a new mux connection establishment attempt may time out while the underlying tty is still busy sending out the remaining data from the previous connection. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix wrong DLCI release orderDaniel Starke1-2/+2
commit deefc58bafb4841df7f0a0d85d89a1c819db9743 upstream. The current DLCI release order starts with the control channel followed by the user channels. Reverse this order to keep the control channel open until all user channels have been released. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix insufficient txframe sizeDaniel Starke1-1/+3
commit 535bf600de75a859698892ee873521a48d289ec1 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size (N1) refers to the length of the information field (i.e. user payload). However, 'txframe' stores the whole frame including frame header, checksum and start/end flags. We also need to consider the byte stuffing overhead. Define constant for the protocol overhead and adjust the 'txframe' size calculation accordingly to reserve enough space for a complete mux frame including byte stuffing for advanced option mode. Note that no byte stuffing is applied to the start and end flag. Also use MAX_MTU instead of MAX_MRU as this buffer is used for data transmission. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix malformed counter for out of frame dataDaniel Starke1-1/+2
commit a24b4b2f660b7ddf3f484b37600bba382cb28a9d upstream. The gsm_mux field 'malformed' represents the number of malformed frames received. However, gsm1_receive() also increases this counter for any out of frame byte. Fix this by ignoring out of frame data for the malformed counter. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix frame reception handlingDaniel Starke1-23/+30
commit 7a0e4b1733b635026a87c023f6d703faf0095e39 upstream. The frame checksum (FCS) is currently handled in gsm_queue() after reception of a frame. However, this breaks layering. A workaround with 'received_fcs' was implemented so far. Furthermore, frames are handled as such even if no end flag was received. Move FCS calculation from gsm_queue() to gsm0_receive() and gsm1_receive(). Also delay gsm_queue() call there until a full frame was received to fix both points. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-6-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2Daniel Starke1-1/+1
commit 06d5afd4d640eea67f5623e76cd5fc03359b7f3c upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in convergence layer type 2 can be either one or two bytes. The length is encoded in the EA bit. This is set 1 for the last byte in the sequence. gsmtty_modem_update() handles this correctly but gsm_dlci_data_output() fails to set EA to 1. There is no case in which we encode two signal octets as there is no case in which we send out a break signal. Therefore, always set the EA bit to 1 for the signal octet to fix this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix mux cleanup after unregister tty deviceDaniel Starke1-1/+6
commit 284260f278b706364fb4c88a7b56ba5298d5973c upstream. Internally, we manage the alive state of the mux channels and mux itself with the field member 'dead'. This makes it possible to notify the user if the accessed underlying link is already gone. On the other hand, however, removing the virtual ttys before terminating the channels may result in peer messages being received without any internal target. Move the mux cleanup procedure from gsmld_detach_gsm() to gsmld_close() to fix this by keeping the virtual ttys open until the mux has been cleaned up. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix decoupled mux resourceDaniel Starke1-25/+38
commit 1ec92e9742774bf42614fceea3bf6b50c9409225 upstream. The active mux instances are managed in the gsm_mux array and via mux_get() and mux_put() functions separately. This gives a very loose coupling between the actual instance and the gsm_mux array which manages it. It also results in unnecessary lockings which makes it prone to failures. And it creates a race condition if more than the maximum number of mux instances are requested while the user changes the parameters of an active instance. The user may loose ownership of the current mux instance in this case. Fix this by moving the gsm_mux array handling to the mux allocation and deallocation functions. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix restart handling via CLD commandDaniel Starke1-48/+20
commit aa371e96f05dcb36a88298f5cb70aa7234d5e8b8 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.8.2 states that both sides will revert to the non-multiplexed mode via a close-down message (CLD). The usual program flow is as following: - start multiplex mode by sending AT+CMUX to the mobile - establish the control channel (DLCI 0) - establish user channels (DLCI >0) - terminate user channels - send close-down message (CLD) - revert to AT protocol (i.e. leave multiplexed mode) The AT protocol is out of scope of the n_gsm driver. However, gsm_disconnect() sends CLD if gsm_config() detects that the requested parameters require the mux protocol to restart. The next immediate action is to start the mux protocol by opening DLCI 0 again. Any responder side which handles CLD commands correctly forces us to fail at this point because AT+CMUX needs to be sent to the mobile to start the mux again. Therefore, remove the CLD command in this phase and keep both sides in multiplexed mode. Remove the gsm_disconnect() function as it become unnecessary and merge the remaining parts into gsm_cleanup_mux() to handle the termination order and locking correctly. Fixes: 71e077915396 ("tty: n_gsm: do not send/receive in ldisc close path") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix missing mux reset on config change at responderDaniel Starke1-1/+1
commit 11451693e4081d32ef65147c6ca08cd0094ae252 upstream. Currently, only the initiator resets the mux protocol if the user requests new parameters that are incompatible to those of the current connection. The responder also needs to reset the multiplexer if the new parameter set requires this. Otherwise, we end up with an inconsistent parameter set between initiator and responder. Revert the old behavior to inform the peer upon an incompatible parameter set change from the user on the responder side by re-establishing the mux protocol in such case. Fixes: 509067bbd264 ("tty: n_gsm: Delete gsm_disconnect when config requester") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09thermal: int340x: Fix attr.show callback prototypeKees Cook1-2/+2
commit d0f6cfb2bd165b0aa307750e07e03420859bd554 upstream. Control Flow Integrity (CFI) instrumentation of the kernel noticed that the caller, dev_attr_show(), and the callback, odvp_show(), did not have matching function prototypes, which would cause a CFI exception to be raised. Correct the prototype by using struct device_attribute instead of struct kobj_attribute. Reported-and-tested-by: Joao Moreira <joao@overdrivepizza.com> Link: https://lore.kernel.org/lkml/067ce8bd4c3968054509831fa2347f4f@overdrivepizza.com/ Fixes: 006f006f1e5c ("thermal/int340x_thermal: Export OEM vendor variables") Cc: 5.8+ <stable@vger.kernel.org> # 5.8+ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09ACPI: processor: idle: Avoid falling back to C3 type C-statesVille Syrjälä1-1/+2
commit fc45e55ebc58dbf622cb89ddbf797589c7a5510b upstream. The "safe state" index is used by acpi_idle_enter_bm() to avoid entering a C-state that may require bus mastering to be disabled on entry in the cases when this is not going to happen. For this reason, it should not be set to point to C3 type of C-states, because they may require bus mastering to be disabled on entry in principle. This was broken by commit d6b88ce2eb9d ("ACPI: processor idle: Allow playing dead in C3 state") which inadvertently allowed the "safe state" index to point to C3 type of C-states. This results in a machine that won't boot past the point when it first enters C3. Restore the correct behaviour (either demote to C1/C2, or use C3 but also set ARB_DIS=1). I hit this on a Fujitsu Siemens Lifebook S6010 (P3) machine. Fixes: d6b88ce2eb9d ("ACPI: processor idle: Allow playing dead in C3 state") Cc: 5.16+ <stable@vger.kernel.org> # 5.16+ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Woody Suwalski <wsuwalski@gmail.com> [ rjw: Subject and changelog adjustments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09net: ethernet: stmmac: fix write to sgmii_adapter_baseDinh Nguyen1-5/+7
commit 5fd1fe4807f91ea0cca043114d929faa11bd4190 upstream. I made a mistake with the commit a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link"). I should have tested against both scenario of having a SGMII interface and one without. Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is NULL, thus a write to this address will fail. Cc: stable@vger.kernel.org Fixes: a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20220420152345.27415-1-dinguyen@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addressesImre Deak1-1/+1
commit 4ae4dd2e26fdfebf0b8c6af6c325383eadfefdb4 upstream. Fix typo in the _SEL_FETCH_PLANE_BASE_1_B register base address. Fixes: a5523e2ff074a5 ("drm/i915: Add PSR2 selective fetch registers") References: https://gitlab.freedesktop.org/drm/intel/-/issues/5400 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v5.9+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421162221.2261895-1-imre.deak@intel.com (cherry picked from commit af2cbc6ef967f61711a3c40fca5366ea0bc7fecc) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09drm/i915: Check EDID for HDR static metadata when choosing blcJouni Högander1-8/+26
commit c05d8332f5d23fa3b521911cbe55a2b67fb21248 upstream. We have now seen panel (XMG Core 15 e21 laptop) advertizing support for Intel proprietary eDP backlight control via DPCD registers, but actually working only with legacy pwm control. This patch adds panel EDID check for possible HDR static metadata and Intel proprietary eDP backlight control is used only if that exists. Missing HDR static metadata is ignored if user specifically asks for Intel proprietary eDP backlight control via enable_dpcd_backlight parameter. v2 : - Ignore missing HDR static metadata if Intel proprietary eDP backlight control is forced via i915.enable_dpcd_backlight - Printout info message if panel is missing HDR static metadata and support for Intel proprietary eDP backlight control is detected Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284 Cc: Lyude Paul <lyude@redhat.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Filippo Falezza <filippo.falezza@outlook.it> Cc: stable@vger.kernel.org Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220413082826.120634-1-jouni.hogander@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> (cherry picked from commit b4b157577cb1de13bee8bebc3576f1de6799a921) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09drm/amdgpu: don't runtime suspend if there are displays attached (v3)Alex Deucher1-35/+70
commit f95af4a9236695caed24fe6401256bb974e8f2a7 upstream. We normally runtime suspend when there are displays attached if they are in the DPMS off state, however, if something wakes the GPU we send a hotplug event on resume (in case any displays were connected while the GPU was in suspend) which can cause userspace to light up the displays again soon after they were turned off. Prior to commit 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."), the driver took a runtime pm reference when the fbdev emulation was enabled because we didn't implement proper shadowing support for vram access when the device was off so the device never runtime suspended when there was a console bound. Once that commit landed, we now utilize the core fb helper implementation which properly handles the emulation, so runtime pm now suspends in cases where it did not before. Ultimately, we need to sort out why runtime suspend in not working in this case for some users, but this should restore similar behavior to before. v2: move check into runtime_suspend v3: wake ups -> wakeups in comment, retain pm_runtime behavior in runtime_idle callback Fixes: 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/ Tested-by: Michele Ballabio <ballabio.m@gmail.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09mtd: rawnand: qcom: fix memory corruption that causes panicMd Sadre Alam1-11/+13
commit ba7542eb2dd5dfc75c457198b88986642e602065 upstream. This patch fixes a memory corruption that occurred in the nand_scan() path for Hynix nand device. On boot, for Hynix nand device will panic at a weird place: | Unable to handle kernel NULL pointer dereference at virtual address 00000070 | [00000070] *pgd=00000000 | Internal error: Oops: 5 [#1] PREEMPT SMP ARM | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0 #38 | Hardware name: Generic DT based system | PC is at nandc_set_reg+0x8/0x1c | LR is at qcom_nandc_command+0x20c/0x5d0 | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113 | sp : c14adc50 ip : c14ee208 fp : c0cc970c | r10: 000000a3 r9 : 00000000 r8 : 00000040 | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040 | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040 | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none | Control: 10c5387d Table: 8020406a DAC: 00000051 | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset 64 size 2048 | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0 | qcom_nandc_command from nand_readid_op+0x198/0x1e8 | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78 | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454 | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8 | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0 | qcom_nandc_probe from platform_probe+0x58/0xac The problem is that the nand_scan()'s qcom_nand_attach_chip callback is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size. This causes the sg_init_table of clear_bam_transaction() in the driver's qcom_nandc_command() to memset much more than what was initially allocated by alloc_bam_transaction(). This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page size in qcom_nand_attach_chip call back after freeing the previously allocated memory for bam txn as per nandc->max_cwperpage = 1 and then again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on page size in qcom_nand_attach_chip call back itself. Cc: stable@vger.kernel.org Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1650268107-5363-1-git-send-email-quic_mdalam@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40"Ville Syrjälä1-5/+0
commit 20e582e16af24b074e583f9551fad557882a3c9d upstream. This reverts commit bfe55a1f7fd6bfede16078bf04c6250fbca11588. This was presumably misdiagnosed as an inability to use C3 at all when I suspect the real problem is just misconfiguration of C3 vs. ARB_DIS. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: 5.16+ <stable@vger.kernel.org> # 5.16+ Tested-by: Woody Suwalski <wsuwalski@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09drivers: net: hippi: Fix deadlock in rr_close()Duoming Zhou1-0/+2
[ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ] There is a deadlock in rr_close(), which is shown below: (Thread 1) | (Thread 2) | rr_open() rr_close() | add_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rr_timer() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09bonding: do not discard lowest hash bit for non layer3+4 hashingsuresh kumar1-4/+9
[ Upstream commit 49aefd131739df552f83c566d0665744c30b1d70 ] Commit b5f862180d70 was introduced to discard lowest hash bit for layer3+4 hashing but it also removes last bit from non layer3+4 hashing Below script shows layer2+3 hashing will result in same slave to be used with above commit. $ cat hash.py #/usr/bin/python3.6 h_dests=[0xa0, 0xa1] h_source=0xe3 hproto=0x8 saddr=0x1e7aa8c0 daddr=0x17aa8c0 for h_dest in h_dests: hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr) hash ^= hash >> 16 hash ^= hash >> 8 print(hash) print("with last bit removed") for h_dest in h_dests: hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr) hash ^= hash >> 16 hash ^= hash >> 8 hash = hash >> 1 print(hash) Output: $ python3.6 hash.py 522133332 522133333 <-------------- will result in both slaves being used with last bit removed 261066666 261066666 <-------------- only single slave used Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09Input: cypress-sf - register a callback to disable the regulatorsZheyu Ma1-0/+14
[ Upstream commit fd0a4b39870d49ff15f6966470185409e261f20f ] When the driver fails to probe, we will get the following splat: [ 19.311970] ------------[ cut here ]------------ [ 19.312566] WARNING: CPU: 3 PID: 375 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 19.317591] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 19.328831] Call Trace: [ 19.329112] <TASK> [ 19.329369] regulator_bulk_free+0x82/0xe0 [ 19.329860] devres_release_group+0x319/0x3d0 [ 19.330357] i2c_device_probe+0x766/0x940 Fix this by adding a callback that will deal with the disabling when the driver fails to probe. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220409022629.3493557-1-zheyuma97@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"Dany Madden2-100/+35
[ Upstream commit aeaf59b78712c7a1827c76f086acff4f586e072f ] This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae When client requests channel or ring size larger than what the server can support the server will cap the request to the supported max. So, the client would not be able to successfully request resources that exceed the server limit. Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits") Signed-off-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASKVladimir Oltean1-4/+0
[ Upstream commit 66a2f5ef68faaf950746747d790a0c95f7ec96d2 ] The Time-Specified Departure feature is indeed mutually exclusive with TX IP checksumming in ENETC, but TX checksumming in itself is broken and was removed from this driver in commit 82728b91f124 ("enetc: Remove Tx checksumming offload code"). The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply with software TSO's expectations, and still did the checksumming in software by calling skb_checksum_help(). So there isn't any restriction for the Time-Specified Departure feature. However, enetc_setup_tc_txtime() doesn't understand that, and blindly looks for NETIF_F_CSUM_MASK. Instead of checking for things which can literally never happen in the current code base, just remove the check and let the driver offload tc-etf qdiscs. Fixes: acede3c5dad5 ("net: enetc: declare NETIF_F_HW_CSUM and do it in software") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220427203017.1291634-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ixgbe: ensure IPsec VF<->PF compatibilityLeon Romanovsky1-1/+2
[ Upstream commit f049efc7f7cd2f3c419f55040928eaefb13b3636 ] The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shannon Nelson <snelson@pensando.io> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: fec: add missing of_node_put() in fec_enet_init_stop_mode()Yang Yingliang1-1/+1
[ Upstream commit d2b52ec056d5bddb055c8f21d7489a23548d0838 ] Put device node in error path in fec_enet_init_stop_mode(). Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09bnx2x: fix napi API usage sequenceManish Chopra1-4/+5
[ Upstream commit af68656d66eda219b7f55ce8313a1da0312c79e1 ] While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34081f1 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09drm/amd/display: Fix memory leak in dcn21_clock_source_createMiaoqian Lin1-0/+1
[ Upstream commit 65e54987508b6f0771f56bdfa3ee1926d52785ae ] When dcn20_clk_src_construct() fails, we need to release clk_src. Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09drm/amdkfd: Fix GWS queue countDavid Yat Sin1-46/+37
[ Upstream commit 7c6b6e18c890f30965b0589b0a57645e1dbccfde ] dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated each time the queue gets evicted. Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue") Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09platform/x86: asus-wmi: Fix driver not binding when fan curve control probe ↵Hans de Goede1-3/+4
fails [ Upstream commit 9fe1bb29ea0ab231aa916dad4bcf0c435beb5869 ] Before this commit fan_curve_check_present() was trying to not cause the probe to fail on devices without fan curve control by testing for known error codes returned by asus_wmi_evaluate_method_buf(). Checking for ENODATA or ENODEV, with the latter being returned by this function when an ACPI integer with a value of ASUS_WMI_UNSUPPORTED_METHOD is returned. But for other ACPI integer returns this function just returns them as is, including the ASUS_WMI_DSTS_UNKNOWN_BIT value of 2. On the Asus U36SD ASUS_WMI_DSTS_UNKNOWN_BIT gets returned, leading to: asus-nb-wmi: probe of asus-nb-wmi failed with error 2 Instead of playing whack a mole with error codes here, simply treat all errors as there not being any fan curves, fixing the driver no longer loading on the Asus U36SD laptop. Fixes: e3d13da7f77d ("platform/x86: asus-wmi: Fix regression when probing for fan curve control") BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2079125 Cc: Luke D. Jones <luke@ljones.dev> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220427114956.332919-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09platform/x86: asus-wmi: Potential buffer overflow in ↵Dan Carpenter1-2/+6
asus_wmi_evaluate_method_buf() [ Upstream commit 4345ece8f0bcc682f1fb3b648922c9be5f7dbe6c ] This code tests for if the obj->buffer.length is larger than the buffer but then it just does the memcpy() anyway. Fixes: 0f0ac158d28f ("platform/x86: asus-wmi: Add support for custom fan curves") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220413073744.GB8812@kili Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLKMartin Blumenstingl1-3/+0
[ Upstream commit 71cffebf6358a7f5031f5b208bbdc1cb4db6e539 ] Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp register. It helped bring this register into a well-defined state so the driver has to rely less on the bootloader to do things right. Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any possibility to configure it. Upon further testing it turns out that all boards which are supported by the GSWIP driver in OpenWrt which use an RMII PHY have a dedicated oscillator on the board which provides the 50MHz RMII reference clock. Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set the MAC also generates the RMII reference clock whose signal then conflicts with the signal from the oscillator on the board. This results in a constant cycle of the PHY detecting link up/down (and as a result of that: the two ports using the AR8030 PHYs are not working). At the time of writing this patch there's no known board where the MAC (GSWIP) has to generate the RMII reference clock. If needed this can be implemented in future by providing a device-tree flag so the GSWIP_MII_CFG_RMII_CLK bit can be toggled per port. Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") Tested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ice: wait 5 s for EMP reset after firmware flashPetr Oros1-0/+3
[ Upstream commit b537752e6cbf0e4475c165178ca02241b53ff6ef ] We need to wait 5 s for EMP reset after firmware flash. Code was extracted from OOT driver (ice v1.8.3 downloaded from sourceforge). Without this wait, fw_activate let card in inconsistent state and recoverable only by second flash/activate. Flash was tested on these fw's: From -> To 3.00 -> 3.10/3.20 3.10 -> 3.00/3.20 3.20 -> 3.00/3.10 Reproducer: [root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin Preparing to flash [fw.mgmt] Erasing [fw.mgmt] Erasing done [fw.mgmt] Flashing 100% [fw.mgmt] Flashing done 100% [fw.undi] Erasing [fw.undi] Erasing done [fw.undi] Flashing 100% [fw.undi] Flashing done 100% [fw.netlist] Erasing [fw.netlist] Erasing done [fw.netlist] Flashing 100% [fw.netlist] Flashing done 100% Activate new firmware by devlink reload [root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate reload_actions_performed: fw_activate [root@host ~]# ip link show ens7f0 71: ens7f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff altname enp202s0f0 dmesg after flash: [ 55.120788] ice: Copyright (c) 2018, Intel Corporation. [ 55.274734] ice 0000:ca:00.0: Get PHY capabilities failed status = -5, continuing anyway [ 55.569797] ice 0000:ca:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.28.0 [ 55.603629] ice 0000:ca:00.0: Get PHY capability failed. [ 55.608951] ice 0000:ca:00.0: ice_init_nvm_phy_type failed: -5 [ 55.647348] ice 0000:ca:00.0: PTP init successful [ 55.675536] ice 0000:ca:00.0: DCB is enabled in the hardware, max number of TCs supported on this port are 8 [ 55.685365] ice 0000:ca:00.0: FW LLDP is disabled, DCBx/LLDP in SW mode. [ 55.692179] ice 0000:ca:00.0: Commit DCB Configuration to the hardware [ 55.701382] ice 0000:ca:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:c9:02.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) Reboot doesn’t help, only second flash/activate with OOT or patched driver put card back in consistent state. After patch: [root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin Preparing to flash [fw.mgmt] Erasing [fw.mgmt] Erasing done [fw.mgmt] Flashing 100% [fw.mgmt] Flashing done 100% [fw.undi] Erasing [fw.undi] Erasing done [fw.undi] Flashing 100% [fw.undi] Flashing done 100% [fw.netlist] Erasing [fw.netlist] Erasing done [fw.netlist] Flashing 100% [fw.netlist] Flashing done 100% Activate new firmware by devlink reload [root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate reload_actions_performed: fw_activate [root@host ~]# ip link show ens7f0 19: ens7f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff altname enp202s0f0 Fixes: 399e27dbbd9e94 ("ice: support immediate firmware activation via devlink reload") Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09drm/sun4i: Remove obsolete references to PHYS_OFFSETSamuel Holland1-3/+0
[ Upstream commit dc3ae06c5f2170d879ff58696f629d8c3868aec3 ] commit b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place") added a platform device notifier that sets the DMA offset for all of the display engine frontend and backend devices. The code applying the offset to DMA buffer physical addresses was then removed from the backend driver in commit 756668ba682e ("drm/sun4i: backend: Remove the MBUS quirks"), but the code subtracting PHYS_OFFSET was left in the frontend driver. As a result, the offset was applied twice in the frontend driver. This likely went unnoticed because it only affects specific configurations (scaling or certain pixel formats) where the frontend is used, on boards with both one of these older SoCs and more than 1 GB of DRAM. In addition, the references to PHYS_OFFSET prevent compiling the driver on architectures where PHYS_OFFSET is not defined. Fixes: b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place") Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-4-samuel@sholland.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: dsa: mv88e6xxx: Fix port_hidden_wait to account for port_base_addrNathan Rossi1-2/+3
[ Upstream commit 24cbdb910bb62b5be3865275e5682be1a7708c0f ] The other port_hidden functions rely on the port_read/port_write functions to access the hidden control port. These functions apply the offset for port_base_addr where applicable. Update port_hidden_wait to use the port_wait_bit so that port_base_addr offsets are accounted for when waiting for the busy bit to change. Without the offset the port_hidden_wait function would timeout on devices that have a non-zero port_base_addr (e.g. MV88E6141), however devices that have a zero port_base_addr would operate correctly (e.g. MV88E6390). Fixes: 609070133aff ("net: dsa: mv88e6xxx: update code operating on hidden registers") Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220425070454.348584-1-nathan@nathanrossi.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: phy: marvell10g: fix return value on errorBaruch Siach1-1/+1
[ Upstream commit 0ed9704b660b259b54743cad8a84a11148f60f0a ] Return back the error value that we get from phy_read_mmd(). Fixes: c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1") Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: bcmgenet: hide status block before TX timestampingJonathan Lemon1-0/+7
[ Upstream commit acac0541d1d65e81e599ec399d34d184d2424401 ] The hardware checksum offloading requires use of a transmit status block inserted before the outgoing frame data, this was updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")' However, skb_tx_timestamp() assumes that it is passed a raw frame and PTP parsing chokes on this status block. Fix this by calling __skb_pull(), which hides the TSB before calling skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly. As the data in the skb has already been set up for DMA, and the dma_unmap_* calls use a separately stored address, there is no no effective change in the data transmission. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com Fixes: d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09cpufreq: qcom-cpufreq-hw: Clear dcvs interruptsVladimir Zapolskiy1-0/+8
[ Upstream commit e4e6448638a01905faeda9bf96aa9df7c8ef463c ] It's noted that dcvs interrupts are not self-clearing, thus an interrupt handler runs constantly, which leads to a severe regression in runtime. To fix the problem an explicit write to clear interrupt register is required, note that on OSM platforms the register may not be present. Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()Yang Yingliang1-0/+2
[ Upstream commit f58ca215cda1975f77b2b762903684a3c101bec9 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()Christophe JAILLET1-0/+2
[ Upstream commit fff8c10368e64e7f8960f149375c12ca5f3b30af ] This code is really spurious. It always returns an ERR_PTR, even when err is known to be 0 and calls put_device() after a successful device_register() call. It is likely that the return statement in the normal path is missing. Add 'return rdev;' to fix it. Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-17 03:09:30 +0300