summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-07-21net: ethernet: ti: cpsw: Push the request_irq function to the end of probeKeerthy1-24/+25
Push the request_irq function to the end of probe so as to ensure all the required fields are populated in the event of an ISR getting executed right after requesting the irq. Currently while loading the crash kernel a crash was seen as soon as devm_request_threaded_irq was called. This was due to n->poll being NULL which is called as part of net_rx_action function. Suggested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21net: dsa: b53: Add missing ARL entries for BCM53125Florian Fainelli1-0/+1
The BCM53125 entry was missing an arl_entries member which would basically prevent the ARL search from terminating properly. This switch has 4 ARL entries, so add that. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20net: tehuti: don't process data if it has not been copied from userspaceColin Ian King1-0/+2
The array data is only populated with valid information from userspace if cmd != SIOCDEVPRIVATE, other cases the array contains garbage on the stack. The subsequent switch statement acts on a subcommand in data[0] which could be any garbage value if cmd is SIOCDEVPRIVATE which seems incorrect to me. Instead, just return EOPNOTSUPP for the case where cmd == SIOCDEVPRIVATE to avoid this issue. As a side note, I suspect that the original intention of the code was for this ioctl to work just for cmd == SIOCDEVPRIVATE (and the current logic is reversed). However, I don't wont to change the current semantics in case any userspace code relies on this existing behaviour. Detected by CoverityScan, CID#139647 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20net: dsa: mv88e6xxx: Enable CMODE config support for 6390XMartin Hundebøll1-0/+1
Commit f39908d3b1c45 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10') added support for setting the CMODE for the 6390X family, but only enabled it for 9290 and 6390 - and left out 6390X. Fix support for setting the CMODE on 6390X also by assigning mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in mv88e6390x_ops too. Fixes: f39908d3b1c4 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10") Signed-off-by: Martin Hundebøll <mnhu@prevas.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19NET: dwmac: Make dwmac reset unconditionalEugeniy Paltsev1-1/+8
Unconditional reset dwmac before HW init if reset controller is present. In existing implementation we reset dwmac only after second module probing: (module load -> unload -> load again [reset happens]) Now we reset dwmac at every module load: (module load [reset happens] -> unload -> load again [reset happens]) Also some reset controllers have only reset callback instead of assert + deassert callbacks pair, so handle this case. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18atm: zatm: Fix an error handling path in 'zatm_init_one()'Christophe Jaillet1-1/+1
If 'dma_set_mask_and_coherent()' fails, we must undo the previous 'pci_request_regions()' call. Adjust corresponding 'goto' to jump at the right place of the error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18ppp: Fix false xmit recursion detect with two ppp devicesGao Feng1-9/+21
The global percpu variable ppp_xmit_recursion is used to detect the ppp xmit recursion to avoid the deadlock, which is caused by one CPU tries to lock the xmit lock twice. But it would report false recursion when one CPU wants to send the skb from two different PPP devices, like one L2TP on the PPPoE. It is a normal case actually. Now use one percpu member of struct ppp instead of the gloable variable to detect the xmit recursion of one ppp device. Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit") Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: Liu Jianying <jianying.liu@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16net: bcmgenet: Free skb after last Tx fragDoug Berger2-60/+84
Since the skb is attached to the first control block of a fragmented skb it is possible that the skb could be freed when reclaiming that control block before all fragments of the skb have been consumed by the hardware and unmapped. This commit introduces first_cb and last_cb pointers to the skb control block used by the driver to keep track of which transmit control blocks within a transmit ring are the first and last ones associated with the skb. It then splits the bcmgenet_free_cb() function into transmit (bcmgenet_free_tx_cb) and receive (bcmgenet_free_rx_cb) versions that can handle the unmapping of dma mapped memory and cleaning up the corresponding control block structure so that the skb is only freed after the last associated transmit control block is reclaimed. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16net: bcmgenet: Fix unmapping of fragments in bcmgenet_xmit()Doug Berger1-106/+85
In case we fail to map a single fragment, we would be leaving the transmit ring populated with stale entries. This commit introduces the helper function bcmgenet_put_txcb() which takes care of rewinding the per-ring write pointer back to where we left. It also consolidates the functionality of bcmgenet_xmit_single() and bcmgenet_xmit_frag() into the bcmgenet_xmit() function to make the unmapping of control blocks cleaner. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: avm: c4: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 11803 544 1 12348 303c isdn/hardware/avm/c4.o File size After adding 'const': text data bss dec hex filename 11931 416 1 12348 303c isdn/hardware/avm/c4.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: mISDN: hfcpci: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 21656 1024 96 22776 58f8 isdn/hardware/mISDN/hfcpci.o File size After adding 'const': text data bss dec hex filename 22424 256 96 22776 58f8 isdn/hardware/mISDN/hfcpci.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: mISDN: avmfritz: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 9963 1936 16 11915 2e8b isdn/hardware/mISDN/avmfritz.o File size After adding 'const': text data bss dec hex filename 10091 1808 16 11915 2e8b isdn/hardware/mISDN/avmfritz.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: mISDN: w6692: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 13959 4080 24 18063 468f isdn/hardware/mISDN/w6692.o File size After adding 'const': text data bss dec hex filename 14087 3952 24 18063 468f isdn/hardware/mISDN/w6692.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: mISDN: hfcmulti: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 63450 1536 1492 66478 103ae isdn/hardware/mISDN/hfcmulti.o File size After adding 'const': text data bss dec hex filename 64698 288 1492 66478 103ae isdn/hardware/mISDN/hfcmulti.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: mISDN: netjet: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 10941 1776 16 12733 31bd isdn/hardware/mISDN/netjet.o File size After adding 'const': text data bss dec hex filename 11005 1712 16 12733 31bd isdn/hardware/mISDN/netjet.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: eicon: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 6224 655 8 6887 1ae7 isdn/hardware/eicon/divasmain.o File size After adding 'const': text data bss dec hex filename 6608 271 8 6887 1ae7 isdn/hardware/eicon/divasmain.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: hisax: hisax_fcpcipnp: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 5989 576 0 6565 19a5 isdn/hisax/hisax_fcpcipnp.o File size After adding 'const': text data bss dec hex filename 6085 480 0 6565 19a5 isdn/hisax/hisax_fcpcipnp.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: hisax: hfc4s8s_l1: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 10512 536 4 11052 2b2c drivers/isdn/hisax/hfc4s8s_l1.o File size After adding 'const': text data bss dec hex filename 10672 376 4 11052 2b2c drivers/isdn/hisax/hfc4s8s_l1.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16isdn: hisax: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 13686 2064 4416 20166 4ec6 drivers/isdn/hisax/config.o File size After adding 'const': text data bss dec hex filename 15030 720 4416 20166 4ec6 drivers/isdn/hisax/config.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16mlx4_en: remove unnecessary returned value checkZhu Yanjun1-5/+3
The function __mlx4_zone_remove_one_entry always returns zero. So it is not necessary to check it. Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16ioc3-eth: store pointer to net_device for priviate areaJason A. Donenfeld1-9/+5
Computing the alignment manually for going from priv to pub is probably not such a good idea, and in general the assumption that going from priv to pub is possible trivially could change, so rather than relying on that, we change things to just store a pointer to pub. This was sugested by DaveM in [1]. [1] http://www.spinics.net/lists/netdev/msg443992.html Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16net: ethernet: bgmac: Make IDM register space optionalAbhishek Shah3-35/+55
IDM operations are usually one time ops and should be done in firmware itself. Driver is not supposed to touch IDM registers. However, for some SoCs', driver is performing IDM read/writes. So this patch masks IDM operations in case firmware is taking care of IDM operations. Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com> Reviewed-by: Oza Oza <oza.oza@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16net: ethernet: bgmac: Remove unnecessary 'return' from platform_bgmac_idm_writeAbhishek Shah1-1/+1
Return type for idm register write callback should be void as 'writel' API is used for write operation. However, there no need to have 'return' in this function. Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com> Reviewed-by: Oza Oza <oza.oza@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14liquidio: fix possible eeprom format string overflowArnd Bergmann1-1/+1
gcc reports that the temporary buffer for computing the string length may be too small here: drivers/net/ethernet/cavium/liquidio/lio_ethtool.c: In function 'lio_get_eeprom_len': /drivers/net/ethernet/cavium/liquidio/lio_ethtool.c:345:21: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] len = sprintf(buf, "boardname:%s serialnum:%s maj:%lld min:%lld\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/cavium/liquidio/lio_ethtool.c:345:6: note: 'sprintf' output between 35 and 167 bytes into a destination of size 128 len = sprintf(buf, "boardname:%s serialnum:%s maj:%lld min:%lld\n", This extends it to 192 bytes, which is certainly enough. As far as I could tell, there are no other constraints that require a specific maximum size. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14vmxnet3: avoid format strint overflow warningArnd Bergmann1-1/+1
gcc-7 notices that "-event-%d" could be more than 11 characters long if we had larger 'vector' numbers: drivers/net/vmxnet3/vmxnet3_drv.c: In function 'vmxnet3_activate_dev': drivers/net/vmxnet3/vmxnet3_drv.c:2095:40: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] sprintf(intr->event_msi_vector_name, "%s-event-%d", ^~~~~~~~~~~~~ drivers/net/vmxnet3/vmxnet3_drv.c:2095:3: note: 'sprintf' output between 9 and 33 bytes into a destination of size 32 The current code is safe, but making the string a little longer is harmless and lets gcc see that it's ok. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: thunder_bgx: avoid format string overflow warningArnd Bergmann1-1/+1
gcc warns that the temporary buffer might be too small here: drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function 'bgx_probe': drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1020:16: error: '%d' directive writing between 1 and 10 bytes into a region of size between 9 and 11 [-Werror=format-overflow=] sprintf(str, "BGX%d LMAC%d mode", bgx->bgx_id, lmacid); ^~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1020:16: note: directive argument in the range [0, 2147483647] drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1020:3: note: 'sprintf' output between 16 and 27 bytes into a destination of size 20 This probably can't happen, but it can't hurt to make it long enough for the theoretical limit. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14bnx2x: fix format overflow warningArnd Bergmann1-1/+2
gcc notices that large queue numbers would overflow the queue name string: drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c: In function 'bnx2x_get_strings': drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c:3165:25: error: '%d' directive writing between 1 and 10 bytes into a region of size 5 [-Werror=format-overflow=] drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c:3165:25: note: directive argument in the range [0, 2147483647] drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c:3165:5: note: 'sprintf' output between 2 and 11 bytes into a destination of size 5 There is a hard limit in place that makes the number at most two digits, so the code is fine. This changes it to use snprintf() to truncate instead of overflowing, which shuts up that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: niu: fix format string overflow warning:Arnd Bergmann1-2/+2
We get a warning for the port_name string that might be longer than six characters if we had more than 10 ports: drivers/net/ethernet/sun/niu.c: In function 'niu_put_parent': drivers/net/ethernet/sun/niu.c:9563:21: error: '%d' directive writing between 1 and 3 bytes into a region of size 2 [-Werror=format-overflow=] sprintf(port_name, "port%d", port); ^~~~~~~~ drivers/net/ethernet/sun/niu.c:9563:21: note: directive argument in the range [0, 255] drivers/net/ethernet/sun/niu.c:9563:2: note: 'sprintf' output between 6 and 8 bytes into a destination of size 6 sprintf(port_name, "port%d", port); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/sun/niu.c: In function 'niu_pci_init_one': drivers/net/ethernet/sun/niu.c:9538:22: error: '%d' directive writing between 1 and 3 bytes into a region of size 2 [-Werror=format-overflow=] sprintf(port_name, "port%d", port); ^~~~~~~~ drivers/net/ethernet/sun/niu.c:9538:22: note: directive argument in the range [0, 255] drivers/net/ethernet/sun/niu.c:9538:3: note: 'sprintf' output between 6 and 8 bytes into a destination of size 6 While we know that the port number is small, there is no harm in making the format string two bytes longer to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14isdn: divert: fix sprintf buffer overflow warningArnd Bergmann1-12/+13
One string we pass into the cs->info buffer might be too long, as pointed out by gcc: drivers/isdn/divert/isdn_divert.c: In function 'll_callback': drivers/isdn/divert/isdn_divert.c:488:22: error: '%d' directive writing between 1 and 3 bytes into a region of size between 1 and 69 [-Werror=format-overflow=] sprintf(cs->info, "%d 0x%lx %s %s %s %s 0x%x 0x%x %d %d %s\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/isdn/divert/isdn_divert.c:488:22: note: directive argument in the range [0, 255] drivers/isdn/divert/isdn_divert.c:488:4: note: 'sprintf' output 25 or more bytes (assuming 129) into a destination of size 90 This is unlikely to actually cause problems, so let's use snprintf as a simple workaround to shut up the warning and truncate the buffer instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: qcom/emac: fix double free of SGMII IRQ during shutdownTimur Tabi1-4/+6
If the interface is not up, then don't try to close it during a shutdown. This avoids possible double free of the IRQ, which can happen during a shutdown. Fixes: 03eb3eb4d4d5 ("net: qcom/emac: add shutdown function") Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14smsc95xx: use ethtool_op_get_ts_info()Petr Kulhavy1-0/+1
This change enables the use of SW timestamping on Raspberry PI. smsc95xx uses the usbnet transmit function usbnet_start_xmit(), which implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using ethtool_op_get_ts_info() as get_ts_info() also the SOF_TIMESTAMPING_TX_SOFTWARE is announced. Signed-off-by: Petr Kulhavy <brain@jikos.cz> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14cxgb4: ptp_clock_register() returns error pointersGanesh Goudar1-1/+2
Check ptp_clock_register() return not only for NULL but also for error pointers, and also nullify adapter->ptp_clock if ptp_clock_register() fails. Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: hns: add acpi function of xge led controlLiuJian2-3/+58
The current code only support DT method to control xge led. This patch is the implementation of acpi method to control xge led. Signed-off-by: LiuJian <liujian56@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14cdc_ncm: Set NTB format again after altsetting switch for Huawei devicesEnrico Mioso2-0/+34
Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Reported-and-tested-by: Christian Panton <christian@panton.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> CC: Bjørn Mork <bjorn@mork.no> CC: Christian Panton <christian@panton.org> CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14mdio: mux: fix parsing mux registers outside of the PHY address rangeMartin Blumenstingl1-2/+2
mdio_mux_init parses the child nodes of the MDIO mux. When using "mdio-mux-mmioreg" the child nodes are describing the register value that is written to switch between the MDIO busses. The change which makes the error messages more verbose changed the parsing of the "reg" property from a simple of_property_read_u32 call to of_mdio_parse_addr. On a Khadas VIM (based on the Meson GXL SoC, which uses mdio-mux-mmioreg) this prevents registering the MDIO mux (because the "reg" values on the MDIO mux child nodes are 0x2009087f and 0xe40908ff) and leads to the following errors: mdio-mux-mmioreg c883455c.eth-phy-mux: /soc/periphs@c8834000/eth-phy-mux/mdio@e40908ff PHY address -469169921 is too large mdio-mux-mmioreg c883455c.eth-phy-mux: Error: Failed to find reg for child /soc/periphs@c8834000/eth-phy-mux/mdio@e40908ff mdio-mux-mmioreg c883455c.eth-phy-mux: /soc/periphs@c8834000/eth-phy-mux/mdio@2009087f PHY address 537462911 is too large mdio-mux-mmioreg c883455c.eth-phy-mux: Error: Failed to find reg for child /soc/periphs@c8834000/eth-phy-mux/mdio@2009087f mdio-mux-mmioreg c883455c.eth-phy-mux: Error: No acceptable child buses found mdio-mux-mmioreg c883455c.eth-phy-mux: failed to register mdio-mux bus /soc/periphs@c8834000/eth-phy-mux (as a result of that ethernet is not working, because the PHY which is connected through the mux' child MDIO bus, which is not being registered). Fix this by reverting the change from of_mdio_parse_addr to of_mdio_parse_addr. Fixes: 342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13cxgb4: add new T5 pci device id'sGanesh Goudar1-0/+2
Add 0x50a3 and 0x50a4 T5 device id's Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13rt2x00: make const array glrt_table staticColin Ian King1-1/+1
Don't populate array glrt_table on the stack but make it static. Makes the object code a smaller by over 670 bytes: Before: text data bss dec hex filename 131772 4733 0 136505 21539 rt2800lib.o After: text data bss dec hex filename 131043 4789 0 135832 21298 rt2800lib.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13net: stmmac: make const array route_possibilities staticColin Ian King1-1/+1
Don't populate array route_possibilities on the stack but make it static const. Makes the object code a little smaller by 85 bytes: Before: text data bss dec hex filename 9901 2448 0 12349 303d dwmac4_core.o After: text data bss dec hex filename 9760 2504 0 12264 2fe8 dwmac4_core.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13net: broadcom: bnx2x: make a couple of const arrays staticColin Ian King1-2/+2
Don't populate various tables on the stack but make them static const. Makes the object code smaller by nearly 200 bytes: Before: text data bss dec hex filename 113468 11200 0 124668 1e6fc bnx2x_ethtool.o After: text data bss dec hex filename 113129 11344 0 124473 1e639 bnx2x_ethtool.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13xgene: Don't fail probe, if there is no clk resource for SGMII interfacesThomas Bogendoerfer1-10/+12
This change fixes following problem [ 1.827940] xgene-enet: probe of 1f210030.ethernet failed with error -2 which leads to a missing ethernet interface (reproducable at least on Gigabyte MP30-AR0 and APM Mustang systems). The check for a valid clk resource fails, because DT doesn't provide a clock for sgenet1. But the driver doesn't use this clk, if the ethernet port is connected via SGMII. Therefore this patch avoids probing for clk on SGMII interfaces. Fixes: 9aea7779b764 ("drivers: net: xgene: Fix crash on DT systems") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds29-90/+145
Pull networking fixes from David Miller: 1) Fix 64-bit division in mlx5 IPSEC offload support, from Ilan Tayari and Arnd Bergmann. 2) Fix race in statistics gathering in bnxt_en driver, from Michael Chan. 3) Can't use a mutex in RCU reader protected section on tap driver, from Cong WANG. 4) Fix mdb leak in bridging code, from Eduardo Valentin. 5) Fix free of wrong pointer variable in nfp driver, from Dan Carpenter. 6) Buffer overflow in brcmfmac driver, from Arend van SPriel. 7) ioremap_nocache() return value needs to be checked in smsc911x driver, from Alexey Khoroshilov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) net: stmmac: revert "support future possible different internal phy mode" sfc: don't read beyond unicast address list datagram: fix kernel-doc comments socket: add documentation for missing elements smsc911x: Add check for ioremap_nocache() return code brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx() net: hns: Bugfix for Tx timeout handling in hns driver net: ipmr: ipmr_get_table() returns NULL nfp: freeing the wrong variable mlxsw: spectrum_switchdev: Check status of memory allocation mlxsw: spectrum_switchdev: Remove unused variable mlxsw: spectrum_router: Fix use-after-free in route replace mlxsw: spectrum_router: Add missing rollback samples/bpf: fix a build issue bridge: mdb: fix leak on complete_info ptr on fail path tap: convert a mutex to a spinlock cxgb4: fix BUG() on interrupt deallocating path of ULD qed: Fix printk option passed when printing ipv6 addresses net: Fix minor code bug in timestamping.txt net: stmmac: Make 'alloc_dma_[rt]x_desc_resources()' look even closer ...
2017-07-13net: stmmac: revert "support future possible different internal phy mode"LABBE Corentin1-7/+3
Since internal phy-mode is reserved for non-xMII protocol we cannot use it with dwmac-sun8i. Furthermore, all DT patchs which comes with this patch were cleaned, so the current state is broken. This reverts commit 1c2fa5f84683 ("net: stmmac: support future possible different internal phy mode") Fixes: 1c2fa5f84683 ("net: stmmac: support future possible different internal phy mode") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13sfc: don't read beyond unicast address listBert Kenward1-5/+3
If we have more than 32 unicast MAC addresses assigned to an interface we will read beyond the end of the address table in the driver when adding filters. The next 256 entries store multicast addresses, so we will end up attempting to insert duplicate filters, which is mostly harmless. If we add more than 288 unicast addresses we will then read past the multicast address table, which is likely to be more exciting. Fixes: 12fb0da45c9a ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13smsc911x: Add check for ioremap_nocache() return codeAlexey Khoroshilov1-0/+5
There is no check for return code of smsc911x_drv_probe() in smsc911x_drv_probe(). The patch adds one. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12Merge branch 'i2c/for-4.13' of ↵Linus Torvalds29-2239/+4551
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This pull request contains: - i2c core reorganization. One source file became too monolithic. It is now split up, yet we still have the same named object as the final output. This should ease maintenance. - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX - designware driver gained slave mode support - xgene-slimpro driver gained ACPI support - bigger overhaul for pca-platform driver - the algo-bit module now supports messages with enforced STOP - slightly bigger than usual set of driver updates and improvements and with much appreciated quality assurance from Andy Shevchenko" * 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits) i2c: Provide a stub for i2c_detect_slave_mode() i2c: designware: Let slave adapter support be optional i2c: designware: Make HW init functions static i2c: designware: fix spelling mistakes i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus i2c: pca-platform: correctly set algo_data.reset_chip i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices i2c: designware: enable SLAVE in platform module i2c: designware: add SLAVE mode functions i2c: zx2967: drop COMPILE_TEST dependency i2c: zx2967: always use the same device when printing errors i2c: pca-platform: use dev_warn/dev_info instead of printk i2c: pca-platform: use device managed allocations i2c: pca-platform: add devicetree awareness i2c: pca-platform: switch to struct gpio_desc dt-bindings: add bindings for i2c-pca-platform i2c: cadance: fix ctrl/addr reg write order i2c: zx2967: add i2c controller driver for ZTE's zx2967 family dt: bindings: add documentation for zx2967 family i2c controller i2c: algo-bit: add support for I2C_M_STOP ...
2017-07-12Merge tag 'iommu-updates-v4.13' of ↵Linus Torvalds19-547/+1197
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This update comes with: - Support for lockless operation in the ARM io-pgtable code. This is an important step to solve the scalability problems in the common dma-iommu code for ARM - Some Errata workarounds for ARM SMMU implemenations - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver. The code suffered from very high flush rates, with the new implementation the flush rate is down to ~1% of what it was before - Support for amd_iommu=off when booting with kexec. The problem here was that the IOMMU driver bailed out early without disabling the iommu hardware, if it was enabled in the old kernel - The Rockchip IOMMU driver is now available on ARM64 - Align the return value of the iommu_ops->device_group call-backs to not miss error values - Preempt-disable optimizations in the Intel VT-d and common IOVA code to help Linux-RT - Various other small cleanups and fixes" * tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Constify intel_dma_ops iommu: Warn once when device_group callback returns NULL iommu/omap: Return ERR_PTR in device_group call-back iommu: Return ERR_PTR() values from device_group call-backs iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device() iommu/vt-d: Don't disable preemption while accessing deferred_flush() iommu/iova: Don't disable preempt around this_cpu_ptr() iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126 iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701) iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74 ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE iommu/arm-smmu-v3: Remove io-pgtable spinlock iommu/arm-smmu: Remove io-pgtable spinlock iommu/io-pgtable-arm-v7s: Support lockless operation iommu/io-pgtable-arm: Support lockless operation iommu/io-pgtable: Introduce explicit coherency iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap ...
2017-07-12brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()Arend van Spriel1-0/+5
The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Cc: stable@vger.kernel.org # 3.9.x Fixes: 18e2f61db3b70 ("brcmfmac: P2P action frame tx.") Reported-by: "freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12net: hns: Bugfix for Tx timeout handling in hns driverLin Yun Sheng1-7/+9
When hns port type is not debug mode, netif_tx_disable is called when there is a tx timeout, which requires system reboot to return to normal state. This patch fix this problem by resetting the net dev. Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12nfp: freeing the wrong variableDan Carpenter1-1/+1
We accidentally free a NULL pointer and leak the pointer we want to free. Also you can tell from the label name what was intended. :) Fixes: abfcdc1de9bf ("nfp: add a stats handler for flower offloads") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12mlxsw: spectrum_switchdev: Check status of memory allocationIdo Schimmel1-0/+6
We can't rely on kzalloc() always succeeding, so check its return value. Suppresses the following smatch error: mlxsw_sp_switchdev_event() error: potential null dereference 'switchdev_work->fdb_info.addr'. (kzalloc returns null) Fixes: af061378924f ("mlxsw: spectrum_switchdev: Add support for learning FDB through notification") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 06:53:04 +0300