summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-03-16Rationalize fasync return valuesJonathan Corbet11-46/+12
Most fasync implementations do something like: return fasync_helper(...); But fasync_helper() will return a positive value at times - a feature used in at least one place. Thus, a number of other drivers do: err = fasync_helper(...); if (err < 0) return err; return 0; In the interests of consistency and more concise code, it makes sense to map positive return values onto zero where ->fasync() is called. Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-16Use f_lock to protect f_flagsJonathan Corbet2-4/+8
Traditionally, changes to struct file->f_flags have been done under BKL protection, or with no protection at all. This patch causes all f_flags changes after file open/creation time to be done under protection of f_lock. This allows the removal of some BKL usage and fixes a number of longstanding (if microscopic) races. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-13Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds5-13/+16
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (f75375s) Remove unnecessary and confusing initialization hwmon: (it87) Properly decode -128 degrees C temperature hwmon: (lm90) Document support for the MAX6648/6692 chips hwmon: (abituguru3) Fix I/O error handling
2009-03-13Merge branch 'fixes-20090312' of ↵Linus Torvalds4-2/+35
git://git.kernel.org/pub/scm/linux/kernel/git/willy/pci * 'fixes-20090312' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/pci: PCIe: portdrv: call pci_disable_device during remove pci: Fix typo in message while disabling HT MSI mapping pci: don't disable too many HT MSI mapping powerpc/pseries: The RPA PCI hotplug driver depends on EEH PCIe: AER: during disable, check subordinate before walking PCI: Add PCI quirk to disable L0s ASPM state for 82575 and 82598
2009-03-13RDMA/nes: Don't allow userspace QPs to use STag zeroFaisal Latif3-5/+37
STag zero is a special STag that allows consumers to access any bus address without registering memory. The nes driver unfortunately allows STag zero to be used even with QPs created by unprivileged userspace consumers, which means that any process with direct verbs access to the nes device can read and write any memory accessible to the underlying PCI device (usually any memory in the system). Such access is usually given for cluster software such as MPI to use, so this is a local privilege escalation bug on most systems running this driver. The driver was using STag zero to receive the last streaming mode data; to allow STag zero to be disabled for unprivileged QPs, the driver now registers a special MR for this data. Cc: <stable@kernel.org> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-13mfd: add support for WM8351 revision BMark Brown1-0/+5
No software visible difference from revision A. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-13acer-wmi: fix regression in backlight detectionMichael Spang1-1/+1
Currently we disable the Acer WMI backlight device if there is no ACPI backlight device. As a result, we end up with no backlight device at all. We should instead disable it if there is an ACPI device, as the other laptop drivers do. This regression was introduced in febf2d9 ("Acer-WMI: fingers off backlight if video.ko is serving this functionality"). Each laptop driver with backlight support got a similar change around febf2d9. The changes to the other drivers look correct; see e.g. a598c82f for a similar but correct change. The regression is also in 2.6.28. Signed-off-by: Michael Spang <mspang@csclub.uwaterloo.ca> Acked-by: Thomas Renninger <trenn@suse.de> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Len Brown <len.brown@intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-13mmc: s3cmci: fix s3c2410_dma_config() arguments.Ben Dooks1-2/+1
The s3cmci driver is calling s3c2410_dma_config with incorrect data for the DCON register. The S3C2410_DCON_HWTRIG is implicit in the channel configuration and the device selection of S3C2410_DCON_CH0_SDI is incorrect as the DMA system may not select channel 0. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-13ds2760_battery.c: fix division by zeroDaniel Mack1-4/+7
The 'battery remaining capacity' calculation in drivers/power/ds2760_battery.c lacks a parameter check to a division operation which causes the kernel to oops on my board. [ 21.233750] Division by zero in kernel. [ 21.237646] [<c002955c>] (__div0+0x0/0x20) from [<c012561c>] (Ldiv0+0x8/0x10) [ 21.244816] [<c01bef34>] (ds2760_battery_read_status+0x0/0x2a4) from [<c01bf3a4>] (ds2760_battery_get_property+0x30/0xdc) [ 21.255803] r8:c03a22c0 r7:c7886100 r6:00000009 r5:c782fe7c r4:c7886084 [ 21.262518] [<c01bf374>] (ds2760_battery_get_property+0x0/0xdc) from [<c01bde98>] (power_supply_show_property+0x48/0x114) [ 21.273480] r6:c7996000 r5:00000009 r4:00000000 [ 21.278111] [<c01bde50>] (power_supply_show_property+0x0/0x114) from [<c01be158>] (power_supply_uevent+0x188/0x280) [ 21.288537] r8:00000001 r7:c7886100 r6:c7996000 r5:000000b4 r4:00000000 [ 21.295222] [<c01bdfd0>] (power_supply_uevent+0x0/0x280) from [<c015c664>] (dev_uevent+0xd4/0x10c) [ 21.304199] [<c015c590>] (dev_uevent+0x0/0x10c) from [<c0128440>] (kobject_uevent_env+0x180/0x390) [ 21.313170] r5:00000000 r4:c78860ac [ 21.316725] [<c01282c0>] (kobject_uevent_env+0x0/0x390) from [<c0128664>] (kobject_uevent+0x14/0x18) [ 21.325850] [<c0128650>] (kobject_uevent+0x0/0x18) from [<c01bdc34>] (power_supply_changed_work+0x5c/0x70) [ 21.335506] [<c01bdbd8>] (power_supply_changed_work+0x0/0x70) from [<c004d290>] (run_workqueue+0xbc/0x144) [ 21.345167] r4:c7812040 [ 21.347716] [<c004d1d4>] (run_workqueue+0x0/0x144) from [<c004d94c>] (worker_thread+0xa8/0xbc) [ 21.356296] r7:c7812040 r6:c7820b00 r5:c782ffa4 r4:c7812048 [ 21.361957] [<c004d8a4>] (worker_thread+0x0/0xbc) from [<c0051008>] (kthread+0x5c/0x94) [ 21.369971] r7:00000000 r6:c004d8a4 r5:c7812040 r4:c782e000 [ 21.375612] [<c0050fac>] (kthread+0x0/0x94) from [<c00403d0>] (do_exit+0x0/0x688) Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Acked-by: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-13drivers/w1/masters/w1-gpio.c: fix read_bit()Daniel Mack1-1/+1
W1 master implementations are expected to return 0 or 1 from their read_bit() function. However, not all platforms do return these values from gpio_get_value() - namely PXAs won't. Hence the w1 gpio-master needs to break the result down to 0 or 1 itself. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-12PCIe: portdrv: call pci_disable_device during removeAlex Chiang1-0/+1
The PCIe port driver calls pci_enable_device() during probe but never calls pci_disable_device() during remove. Cc: stable@kernel.org Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2009-03-12pci: Fix typo in message while disabling HT MSI mappingPrakash Punnoor1-1/+1
"Enabling" should read "Disabling" Signed-off-by: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2009-03-12pci: don't disable too many HT MSI mappingPrakash Punnoor1-0/+4
Prakash's system needs MSI disabled on some bridges, but not all. This seems to be the minimal fix for 2.6.29, but should be replaced during 2.6.30. Signed-off-by: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2009-03-12powerpc/pseries: The RPA PCI hotplug driver depends on EEHMichael Ellerman1-1/+1
The RPA PCI hotplug driver calls EEH routines, so should depend on EEH. Also PPC_PSERIES implies PPC64, so remove that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2009-03-12PCIe: AER: during disable, check subordinate before walkingAlex Chiang1-0/+3
Commit 47a8b0cc (Enable PCIe AER only after checking firmware support) wants to walk the PCI bus in the remove path to disable AER, and calls pci_walk_bus for downstream bridges. Unfortunately, in the remove path, we remove devices and bridges in a depth-first manner, starting with the furthest downstream bridge and working our way backwards. The furthest downstream bridges will not have a dev->subordinate, and we hit a NULL deref in pci_walk_bus. Check for dev->subordinate first before attempting to walk the PCI hierarchy below us. Acked-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2009-03-12PCI: Add PCI quirk to disable L0s ASPM state for 82575 and 82598Alexander Duyck1-0/+25
This patch is intended to disable L0s ASPM link state for 82598 (ixgbe) parts due to the fact that it is possible to corrupt TX data when coming back out of L0s on some systems. The workaround had been added for 82575 (igb) previously, but did not use the ASPM api. This quirk uses the ASPM api to prevent the ASPM subsystem from re-enabling the L0s state. Instead of adding the fix in igb to the ixgbe driver as well it was decided to move it into a pci quirk. It is necessary to move the fix out of the driver and into a pci quirk in order to prevent the issue from occuring prior to driver load to handle the possibility of the device being passed to a VM via direct assignment. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2009-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds3-6/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sunhme: Fix qfe parent detection. sparc64: Fix lost interrupts on sun4u. sparc64: wait_event_interruptible_timeout may return -ERESTARTSYS jsflash: stop defining MAJOR_NR
2009-03-12hwmon: (f75375s) Remove unnecessary and confusing initializationAndrew Klossner1-1/+1
f75375_probe calls i2c_get_clientdata to initialize the data pointer, but there isn't yet any client data to get, and the value is never used before the variable is assigned a new value seven lines later. The call doesn't hurt anything and wastes only a couple of cycles. The reason to fix it is because this module serves as an example to hackers writing new hwmon drivers, and this part of the example is confusing. Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12hwmon: (it87) Properly decode -128 degrees C temperatureJean Delvare1-4/+4
The it87 driver is reporting -128 degrees C as +128 degrees C. That's not a terribly likely temperature value but let's still get it right, especially when it simplifies the code. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12hwmon: (lm90) Document support for the MAX6648/6692 chipsDarrick J. Wong2-6/+6
Update documentation to prevent further confusion/duplication. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12hwmon: (abituguru3) Fix I/O error handlingJean Delvare1-2/+5
Fix a logic bug reported by Roel Kluin, by rewriting the error handling code in a clearer way. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Roel Kluin <roel.kluin@gmail.com> Acked-by: Alistair John Strachan <alistair@devzero.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
2009-03-11Merge branch 'merge' of ↵Linus Torvalds4-12/+18
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: radeonfb/aty128fb: Disable broken early resume hook for PowerBooks hvc_console: Remove tty->low_latency on pseries backends powerpc: fix linkstation and storcenter compilation breakage powerpc/4xx: Enable SERIAL_OF support by default for Virtex platforms
2009-03-11Merge branch 'for-linus' of ↵Linus Torvalds5-37/+99
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix 945 fence register writes for fence 8 and above. drm/i915: Protect active fences on i915 drm/i915: Check to see if we've pinned all available fences drm/i915: Check fence status on every pin. drm/i915: First recheck for an empty fence register. drm/i915: Fix bad \n in MTRR failure notice. drm/i915: Don't restore palettes through VGA registers. i915: add newline to i915_gem_object_pin failure msg drm: Return EINVAL on duplicate objects in execbuffer object list
2009-03-11drm/i915: fix 945 fence register writes for fence 8 and above.Eric Anholt2-4/+18
The last 8 fence registers sit at a different offset, so when we went to set fence number 8 in the lower offset, we instead set PGETBL_CTL, and the GPU got all sorts of angry at us. fd.o bug #20567. Easily reproducible by running glxgears and killing it about 6 times. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-11drm/i915: Protect active fences on i915Chris Wilson1-7/+31
The i915 also uses the fence registers for GPU access to tiled buffers so we cannot reallocate one whilst it is on the active list. By performing a LRU scan of the fenced buffers we also avoid waiting the possibility of waiting on a pinned, or otherwise unusable, buffer. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-11drm/i915: Check to see if we've pinned all available fencesChris Wilson1-2/+10
We need to check and report if there are no available fences - or else we spin endlessly waiting for a buffer to magically unpin itself. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-11drm/i915: Check fence status on every pin.Chris Wilson1-8/+15
As we may steal the fence register of an unpinned buffer for another, every time we repin the buffer we need to recheck whether it needs to be allocated a fence. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-11drm/i915: First recheck for an empty fence register.Chris Wilson1-1/+1
If we wait upon a request and successfully unbind a buffer occupying a fence register, then that slot will be freed and cause a NULL derefrence upon rescanning. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-11radeonfb/aty128fb: Disable broken early resume hook for PowerBooksBenjamin Herrenschmidt2-2/+18
radeonfb and aty128fb have a special hook called by the PowerMac platform code very very early on resume from sleep to bring the screen back. This is useful for debugging wakup problems, but unfortunately, this also became a source of problems of its own. The hook is called extremely early, with interrupts still off, and the code path involved with that code nowadays rely on things like taking mutexes, GFP_KERNEL allocations, etc... In addition, the driver now relies on the PCI core to restore the standard config space before calling resume which doesn't happen with this early code path. I'm keeping the code in but commented out along with a fixup call to pci_restore_state(). The reason is that I still want to make it easy to re-enable temporarily to track wake up problems, and it's possible that I can revive it at some stage if we make sleeping things save to call in early resume using a system state. In the meantime, this should fix several reported regressions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11hvc_console: Remove tty->low_latency on pseries backendsBenjamin Herrenschmidt2-10/+0
The hvcs and hvsi backends both set tty->low_latency to one, along with more or less scary comments regarding bugs or races that would happen if not doing so. However, they also both call tty_flip_buffer_push() in conexts where it's illegal to do so since some recent tty changes (or at least it may have been illegal always but it nows blows) when low_latency is set (ie, hard interrupt or with spinlock held and irqs disabled). This removes the setting for now to get them back to working condition, we'll have to address the races described in the comments separately if they are still an issue (some of this might have been fixed already). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11i810: fix kernel crash fix when struct fb_var_screeninfo is suppliedSamuel CUELLA1-2/+3
Prevent the kernel from being crashed by a divide-by-zero operation when supplied an incorrectly filled 'struct fb_var_screeninfo' from userland. Previously i810_main.c:1005 (i810_check_params) was using the global 'yres' symbol previously defined at i810_main.c:145 as a module parameter value holder (i810_main.c:2174). If i810fb is compiled-in or if this param doesn't get a default value, this direct usage leads to a divide-by-zero at i810_main.c:1005 (i810_check_params). The patch simply replace the 'yres' global, perhaps undefined symbol usage by a given parameter structure lookup. This problem occurs with directfb, mplayer -vo fbdev, SDL library. It was also reported ( but non solved ) at: http://mail.directfb.org/pipermail/directfb-dev/2008-March/004050.html Signed-off-by: Samuel CUELLA <samuel.cuella@supinfo.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-11mtd: physmap: fix NULL pointer dereference in error pathAtsushi Nemoto1-8/+11
commit e480814f138cd5d78a8efe397756ba6b6518fdb6 ("[MTD] [MAPS] physmap: fix wrong free and del_mtd_{partition,device}") introduces a NULL pointer dereference in physmap_flash_remove when called from the error path in physmap_flash_probe (if map_probe failed). Call del_mtd_{partition,device} only if info->cmtd was not NULL. Reported-by: pHilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-11intel-agp: fix a panic with 1M of shared memory, no GTT entriesLubomir Rintel1-3/+5
When GTT size is equal to amount of video memory, the amount of GTT entries is computed lower than zero, which is invalid and leads to off-by-one error in intel_i915_configure() Originally posted here: http://bugzilla.kernel.org/show_bug.cgi?id=12539 http://bugzilla.redhat.com/show_bug.cgi?id=445592 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Dave Airlie <airlied@linux.ie> Reviewed-by: Eric Anholt <eric@anholt.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-11mtd_dataflash: fix probing of AT45DB321C chips.Will Newton1-1/+2
Commit 771999b65f79264acde4b855e5d35696eca5e80c ("[MTD] DataFlash: bugfix, binary page sizes now handled") broke support for probing AT45DB321C flash chips. These chips do not support the "page size" status bit, so if we match the JEDEC id return early. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Will Newton <will.newton@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-11x86/agp: tighten check to update amd nb apertureYinghai Lu1-4/+9
Impact: fix bug to make agp work with dri Jeffrey reported that dri does work with 64bit, but doesn't work with 32bit it turns out NB aperture is 32M, aperture on agp is 128M 64bit is using 64M for vaidation for 64 iommu/gart 32bit is only using 32M..., and will not update the nb aperture. So try to compare nb apterture and agp apterture before leaving not touch nb aperture. Reported-by: Jeffrey Trull <jetrull@sbcglobal.net> Tested-by: Jeffrey Trull <jetrull@sbcglobal.net> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Dave Airlie <airlied@linux.ie> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-11lm85: add VRM10 support for adt7468 chipDarrick J. Wong1-1/+2
The adt7468 chip supports VRM10 sensors just like the adt7463; add a missing check for it. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-11lm85: fix the version check that broke adt7468 probingDarrick J. Wong1-1/+4
The verstep check in the lm85 driver fails because the upper nibble of the version register is 0x7, not 0x6, on the adt7468 chip. Probing of all adt7468s was broken by 69fc1feba2d5856ff74dedb6ae9d8c490210825c ("hwmon: (lm85) Rework the device detection"), and this patch fixes that. Also add in a missing i2c_device_id that accidentally got dropped from the original patch. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-11mm: get_nid_for_pfn() returns intRoel Kluin1-1/+1
get_nid_for_pfn() returns int Presumably the (nid < 0) case has never happened. We do know that it is happening on one system while creating a symlink for a memory section so it should also happen on the same system if unregister_mem_sect_under_nodes() were called to remove the same symlink. The test was actually added in response to a problem with an earlier version reported by Yasunori Goto where one or more of the leading pages of a memory section on the 2nd node of one of his systems was uninitialized because I believe they coincided with a memory hole. That earlier version did not ignore uninitialized pages and determined the nid by considering only the 1st page of each memory section. This caused the symlink to the 1st memory section on the 2nd node to be incorrectly created in /sys/devices/system/node/node0 instead of /sys/devices/system/node/node1. The problem was fixed by adding the test to skip over uninitialized pages. I suspect we have not seen any reports of the non-removal of a symlink due to the incorrect declaration of the nid variable in unregister_mem_sect_under_nodes() because - systems where a memory section could have an uninitialized range of leading pages are probably rare. - memory remove is probably not done very frequently on the systems that are capable of demonstrating the problem. - lingering symlink(s) that should have been removed may have simply gone unnoticed. [garyhade@us.ibm.com: wrote changelog] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10drm/i915: Fix bad \n in MTRR failure notice.Eric Anholt1-1/+1
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10drm/i915: Don't restore palettes through VGA registers.Pierre Willenbrock2-12/+0
The VGA registers just hit the pipe registers that we already set through MMIO. This fixes strange colors on resume. Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10i915: add newline to i915_gem_object_pin failure msgKyle McMartin1-1/+1
Prevents formatting nasty as below: [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10drm: Return EINVAL on duplicate objects in execbuffer object listKristian Høgsberg2-1/+22
If userspace passes an object list with the same object appearing more than once, we end up hitting the BUG_ON() in i915_gem_object_set_to_gpu_domain() as it gets called a second time for the same object. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10Merge branch 'sh/for-2.6.29' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: video: deferred io cleanup fix for sh_mobile_lcdcfb sh: Add media/soc_camera.h to board setup of Renesas AP325RXA
2009-03-10video: deferred io cleanup fix for sh_mobile_lcdcfbMagnus Damm1-4/+2
Fix deferred io cleanup patch in the sh_mobile_lcdcfb driver. If probe() fails early the sh_mobile_lcdc_stop() function will be called to clean up deferred io. This patch modifies the code to only call fb_deferred_io_cleanup() after deferred io has been initialized. With this patch applied we no longer hit BUG_ON() inside fb_deferred_io_cleanup(). Triggers on a Migo-R with the SYS QVGA panel board unmounted. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds1-12/+18
* 'for-linus' of git://neil.brown.name/md: md: fix deadlock when stopping arrays
2009-03-09Merge branch 'fixes' of ↵Linus Torvalds1-33/+18
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule. Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."
2009-03-09Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."Dave Jones1-33/+18
This reverts commit e088e4c9cdb618675874becb91b2fd581ee707e6. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: Dave Jones <davej@redhat.com>
2009-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds17-35/+95
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) p54: fix race condition in memory management cfg80211: test before subtraction on unsigned iwlwifi: fix error flow in iwl*_pci_probe rt2x00 : more devices to rt73usb.c rt2x00 : more devices to rt2500usb.c bonding: Fix device passed into ->ndo_neigh_setup(). vlan: Fix vlan-in-vlan crashes. net: Fix missing dev->neigh_setup in register_netdevice(). tmspci: fix request_irq race pkt_sched: act_police: Fix a rate estimator test. tg3: Fix 5906 link problems SCTP: change sctp_ctl_sock_init() to try IPv4 if IPv6 fails IPv6: add "disable" module parameter support to ipv6.ko sungem: another error printed one too early aoe: error printed 1 too early net pcmcia: worklimit reaches -1 net: more timeouts that reach -1 net: fix tokenring license dm9601: new vendor/product IDs netlink: invert error code in netlink_set_err() ...
2009-03-09sunhme: Fix qfe parent detection.Friedrich Oslage1-2/+0
Signed-off-by: Friedrich Oslage <bluebird@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-09lguest: fix for CONFIG_SPARSE_IRQ=yRusty Russell1-0/+6
Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y We now need to call irq_to_desc_alloc_cpu() before set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no kmalloc available). So do it as we use interrupts instead. Also means we only alloc for irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 13:00:01 +0300