summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-08-20net: 3c59x: constify eisa_device_idArvind Yadav1-1/+1
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20net: 3c509: constify eisa_device_idArvind Yadav1-1/+1
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: don't reuse pointers in ring dumpingJakub Kicinski1-6/+7
We were reusing skb pointer when reading page frag, since ring entries contain a union of a skb and frag pointer. This can be confusing to people reading the code. Refactor the code to read frag pointer directly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: fix copy paste in names and messages regarding vNICsJakub Kicinski1-2/+2
Data and control vNICs currently use the same area name and error message. This could lead to confusion. Make sure the error message says "ctrl" in case of control and the data area is called "nfp.bar0". Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: add ethtool statistics for representorsJakub Kicinski2-4/+71
Representors may be associated with both VFs or more importantly with physical ports. Allow vNIC and MAC statistics to be read with ethtool -S on representors. In case of vNICs we reuse the vNIC statistic helper, we just need to swap RX and TX to give statistics the "switch perspective." Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: add pointer to vNIC config memory to nfp_port structureJakub Kicinski3-37/+18
Simplify the statistics handling code by keeping pointer to vNIC's config memory in nfp_port. Note that this is referring to the representor side of vNICs, vNIC side has the pointer in nfp_net. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: report MAC statistics in ethtoolJakub Kicinski2-17/+153
Add reporting of MAC statistics in ethtool. MAC statistics are read out from the MAC IP and accumulated by application FW, therefore their presence depends on the application FW. Add missing defines and string names for the statistics and dump them in ethtool -S. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: store pointer to MAC statistics in nfp_portJakub Kicinski3-8/+9
Store pointer to device memory containing MAC statistics in nfp_port. This simplifies representor code and will be used to dump those statistics in ethtool as well. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: split software and hardware vNIC statisticsJakub Kicinski1-72/+120
In preparation for reporting vNIC HW stats on representors split handling of the SW and HW stats in ethtool -S. Representors don't have SW stats (since vNIC is assigned to the VM). Remove the questionable defines which assume nn variable exists in the scope. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: add helper for printing ethtool stringsJakub Kicinski1-33/+32
Add a helper for printing ethtool strings and advancing the pointer correctly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: don't report standard netdev statistics in ethtoolJakub Kicinski1-77/+32
We have been recently called out as a bad example for reporting standard netdev statistics as part of ethtool. Fix that :) Removing standard statistics allows us to simplify the structure holding definitions since we no longer have to mux different types of statistics. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: allow retreiving management FW logs on representorsJakub Kicinski2-18/+17
Users should be able to dump the management FW logs on any of the driver's netdevs. Make the code only depend on the nfp_app and share it between vNICs and representors. Storing the dump flag is simply dropped for now, since we only support the argument being set to 0. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: provide ethtool_drvinfo on representorsJakub Kicinski3-12/+54
Extend representors' ethtool ops to show basic info like firmware version, driver version, and driver name. While at it don't set drvinfo.n_stats and drvinfo.regdump_len, core will invoke appropriate handlers to get those. A helper is added to turn a netdev into nfp_app for convenience. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19nfp: link basic ethtool ops to representorsJakub Kicinski3-0/+7
Start linking ethtool ops to representors. Begin by adding a separate ops structure and providing link state. Next patches will convert appropriate functions to only use nfp_port, which will make them reusable on representors. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: drop unused attribute argument from sysfs queue funcsstephen hemminger1-1/+1
The show and store functions don't need/use the attribute. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Add additional ethtool statisticsLendacky, Thomas3-1/+16
Add some additional statistics for tracking VXLAN packets and checksum errors. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Add support for VXLAN offload capabilitiesLendacky, Thomas5-6/+520
The hardware has the capability to perform checksum offload support (both Tx and Rx) and TSO support for VXLAN packets. Add the support required to enable this. The hardware can only support a single VXLAN port for offload. If more than one VXLAN port is added then the offload capabilities have to be disabled and can no longer be advertised. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Convert to using the new link mode settingsLendacky, Thomas5-242/+345
Convert from using the old u32 supported, advertising, etc. link settings to the new link mode settings that support bit positions / settings greater than 32 bits. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Add per queue Tx and Rx statisticsLendacky, Thomas3-8/+46
Add per queue Tx and Rx packet and byte counts. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Add hardware features debug outputLendacky, Thomas1-3/+75
Use the dynamic debug support to output information about the hardware features reported by the device. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Optimize DMA channel interrupt enablementLendacky, Thomas2-44/+37
Currently whenever the driver needs to enable or disable interrupts for a DMA channel it reads the interrupt enable register (IER), updates the value and then writes the new value back to the IER. Since the hardware does not change the IER, software can track this value and elimiate the need to read it each time. Add the IER value to the channel related data structure and use that as the base for enabling and disabling interrupts, thus removing the need for the MMIO read. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Add additional dynamic debug messagesLendacky, Thomas1-0/+4
Add some additional dynamic debug message to the driver. The new messages will provide additional information about the PCS window calculation. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Add support to handle device renamingLendacky, Thomas4-46/+100
Many of the names used by the driver are based upon the name of the device found during device probe. Move the formatting of the names into the device open function so that any renaming that occurs before the device is brought up will be accounted for. This also means moving the creation of some named workqueues into the device open path. Add support to register for net events so that if a device is renamed the corresponding debugfs directory can be renamed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Update TSO packet statistics accuracyLendacky, Thomas1-1/+1
When transmitting a TSO packet, the driver only increments the TSO packet statistic by one rather than the number of total packets that were sent. Update the driver to record the total number of packets that resulted from TSO transmit. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Be sure driver shuts down cleanly on module removalLendacky, Thomas2-4/+2
Sometimes when the driver is being unloaded while the devices are still up the driver can issue errors. This is based on timing and the double invocation of some routines. The phy_exit() call needs to be run after the network device has been closed and unregistered from the system. Also, the phy_exit() does not need to invoke phy_stop() since that will be called as part of the device closing, so remove that call. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Set the MII control width for the MAC interfaceLendacky, Thomas2-0/+3
When running in SGMII mode at speeds below 1000Mbps, the auto-negotition control register must set the MII control width for the MAC interface to be 8-bits wide. By default the width is 4-bits. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19amd-xgbe: Set the MDIO mode for 10000Base-T configurationLendacky, Thomas1-1/+1
Currently the MDIO mode is set to none for the 10000Base-T, which is incorrect. The MDIO mode should for this configuration should be clause 45. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19mlx5: ensure 0 is returned when vport is zeroColin Ian King1-1/+1
Currently, if vport is zero then then an uninialized return status in err is returned. Since the only return status at the end of the function esw_add_uc_addr is zero for the current set of return paths we may as well just return 0 rather than err to fix this issue. Detected by CoverityScan, CID#1452698 ("Uninitialized scalar variable") Fixes: eeb66cdb6826 ("net/mlx5: Separate between E-Switch and MPFS") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19ixgbe: change ndo_xdp_xmit return code on xmit errorsJesper Dangaard Brouer1-1/+1
Use errno -ENOSPC ("No space left on device") when the XDP xmit have no space left on the TX ring buffer, instead of -ENOMEM. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19liquidio: remove support for deprecated f/w cmd OCTNET_CMD_RESET_PFRick Farrington2-10/+0
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19macvlan: add offload features for encapsulationDimitris Michailidis1-1/+2
Currently macvlan devices do not set their hw_enc_features making encapsulated Tx packets resort to SW fallbacks. Add encapsulation GSO offloads to ->features as is done for the other GSOs and set ->hw_enc_features. Signed-off-by: Dimitris Michailidis <dmichail@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19liquidio: fix Smatch errorIntiyaz Basha1-2/+2
Fix Smatch error by not dereferencing iq pointer if it's NULL. See http://marc.info/?l=kernel-janitors&m=150296723301129&w=2 Also, remove unnecessary parentheses. Fixes: d314ac222829 ("liquidio: moved liquidio_napi_poll to lio_core.c") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18Merge branch 'for-upstream' of ↵David S. Miller5-65/+190
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-08-18 Here's one more bluetooth-next pull request for the 4.14 kernel: - Multiple fixes for Broadcom controllers - Fixes to the bluecard HCI driver - New USB ID for Realtek RTL8723BE controller - Fix static analyzer warning with kfree Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: hns3: Fixes the static check warning due to missing unsupp L3 proto checkSalil1-4/+10
This patch fixes the static check warning due to missing handling leg of unsupported L3 protocol type in the hns3_get_l4_protocol() function. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: hns3: Fixes the static checker error warning in hns3_get_link_ksettings()Salil1-37/+48
This patch fixes the static check error warning in hns3_get_link_ksettings() function by re-arranging the code. Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 Driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: hns3: Fixes the missing u64_stats_fetch_begin_irq in 64-bit stats fetchSalil1-0/+2
This patch fixes the missing u64_stats_fetch_begin_irq() while trying to atomically do 64-bit RX/TX fetch. We did not get any error during test as our SoC is 64-bit so all of these seq/lock operations results in NOOP. As such, this seq lock supports has been added for the sake of completion if this code ever runs on 32-bit platform and we are trying to do 64-bit stats fetch. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net/sched: Fix the logic error to decide the ingress qdiscChris Mi6-6/+6
The offending commit used a newly added helper function. But the logic is wrong. Without this fix, the affected NICs can't do HW offload. Error -EOPNOTSUPP will be returned directly. Fixes: a2e8da9378cc ("net/sched: use newly added classid identity helpers") Signed-off-by: Chris Mi <chrism@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: use skb_cow_head() for L2 OSA xmitJulian Wiedmann3-22/+65
Taking a full copy via skb_realloc_headroom() on every xmit is overkill and wastes CPU time; all we actually need is to push on the qeth_hdr. So rework the L2 OSA TX path to avoid the copy. Minor complications arise because struct qeth_hdr must not cross a page boundary. So add a new helper qeth_push_hdr() that catches this, and falls back to the hdr cache that we already use for IQDs. This change uncovered that qeth's TX completion takes rather long. Now that we no longer free the original skb straight away and thus call skb->destructor later than before, throughput regresses significantly. For now, restore old behaviour by adding an explicit skb_orphan(), and a big TODO to improve the TX completion time. Tested-by: Nils Hoppmann <niho@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: unify code to build header elementsJulian Wiedmann1-14/+15
After plenty of refactoring, use hd_len as single indication that the skb needs a dedicated header element. This preserves existing behaviour for TSO, as 'hdr' always points to skb->data. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: pass full IQD header length to fill_buffer()Julian Wiedmann3-4/+4
This is a prerequisite for unifying the code to build header elements. The TSO header has a different size, so we can no longer rely on implicitly adding the size of a normal qeth_hdr. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: pass TSO data offset to fill_buffer()Julian Wiedmann4-10/+8
For TSO we need to skip the skb's qeth/IP/TCP headers when mapping it into buffer elements. Instead of (mis)using skb_pull(), pass a corresponding offset to fill_buffer() like we already do for IQDs. No actual change in the resulting TSO buffers. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: pass TSO header length to fill_buffer()Julian Wiedmann4-21/+23
The TSO code already calculates the length of its header element, no need to duplicate this in the low-level code again. Use this opportunity to make hd_len unsigned, and for TSO match its calculation to what tso_fill_header() does. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: pass full data length to l2_fill_header()Julian Wiedmann1-6/+6
For IQD we already need to fix up the qeth_hdr's length field, and future changes will require more flexibility for OSA as well. The device-specific path knows best what header length it requires, so just pass it from there. While at it, remove the unused qeth_card parameter. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: split L2 xmit pathsJulian Wiedmann1-102/+123
l2_hard_start_xmit() actually doesn't contain much shared code, and having device-specific paths makes isolated changes a lot easier. So split it into three routines for IQD, OSN and OSD/OSM/OSX. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: with embedded f/w, issue droq credits before enablementRick Farrington1-8/+12
1. Issue credits BEFORE enabling DROQ's; this prevents PKTPF_ERR interrupt. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: with embedded f/w, don't reload f/w, issue pf flr at exitRick Farrington1-24/+46
1. Add support for PF FLR when exiting (enables CORE_DRV_ACTIVE upon next driver init) 2. Skip some initialization (don't try to load f/w, activate consoles). Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-17Bluetooth: hci_bcm: Handle empty packet after firmware loadingMarcel Holtmann1-0/+11
The Broadcom controller on the Raspberry Pi3 sends an empty packet with packet type 0x00 after launching the firmware. This will cause logging of errors. Bluetooth: hci0: Frame reassembly failed (-84) Since this seems to be an intented behaviour of the controller, handle it gracefully by parsing that empty packet with packet type 0x00 and then just simply report it as diagnostic packet. With that change no errors are logging and the packet itself is actually recorded in the Bluetooth monitor traces. < HCI Command: Broadcom Launch RAM (0x3f|0x004e) plen 4 Address: 0xffffffff > HCI Event: Command Complete (0x0e) plen 4 Broadcom Launch RAM (0x3f|0x004e) ncmd 1 Status: Success (0x00) = Vendor Diagnostic (len 0) < HCI Command: Broadcom Update UART Baud Rate (0x3f|0x0018) plen 6 00 00 00 10 0e 00 ...... > HCI Event: Command Complete (0x0e) plen 4 Broadcom Update UART Baud Rate (0x3f|0x0018) ncmd 1 Status: Success (0x00) < HCI Command: Reset (0x03|0x0003) plen 0 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-17Bluetooth: hci_bcm: Add serdev supportLoic Poulain2-2/+84
Add basic support for Broadcom serial slave devices. Probe the serial device, retrieve its maximum speed and register a new hci uart device. Tested/compatible with bcm43438 (RPi3). Signed-off-by: Loic Poulain <loic.poulain@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-08-17net: ibm: ibmvnic: constify vio_device_idArvind Yadav1-1/+1
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-17net: ibm: ibmveth: constify vio_device_idArvind Yadav1-1/+1
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-22 06:35:07 +0300