summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-09-26drm/nouveau/nvkm: Replace -ENOSYS with -ENODEVGuenter Roeck1-1/+1
commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream. nvkm test builds fail with the following error. drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info': drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5' The code builds on most architectures, but fails on parisc where ENOSYS is defined as 251. Replace the error code with -ENODEV (-19). The actual error code does not really matter and is not passed to userspace - it just has to be negative. Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26rtc: rx8010: select REGMAP_I2CYu-Tung Chang1-0/+1
[ Upstream commit 0c45d3e24ef3d3d87c5e0077b8f38d1372af7176 ] The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so depending on the configuration the build may fail. Fix it. Signed-off-by: Yu-Tung Chang <mtwget@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210830052532.40356-1-mtwget@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()Hannes Reinecke1-1/+2
[ Upstream commit f04064814c2a15c22ed9c803f9b634ef34f91092 ] The serial number is copied into the buffer via memcpy_and_pad() with the length NVMET_SN_MAX_SIZE. So when printing out we also need to take just that length as anything beyond that will be uninitialized. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: stm32-lp: Don't modify HW state in .remove() callbackUwe Kleine-König1-2/+0
[ Upstream commit d44084c93427bb0a9261432db1a8ca76a42d805e ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: rockchip: Don't modify HW state in .remove() callbackUwe Kleine-König1-14/+0
[ Upstream commit 9d768cd7fd42bb0be16f36aec48548fca5260759 ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: img: Don't modify HW state in .remove() callbackUwe Kleine-König1-16/+0
[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26habanalabs: cannot sleep while holding spinlockfarah kassabri2-3/+1
[ Upstream commit 607b1468c2263e082d74c1a3e71399a9026b41ce ] Fix 2 areas in the code where it's possible the code will go to sleep while holding a spinlock. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26habanalabs: add "in device creation" statusOmer Shpigelman4-16/+17
[ Upstream commit 71731090ab17a208a58020e4b342fdfee280458a ] On init, the disabled state is cleared right before hw_init and that causes the device to report on "Operational" state before the device initialization is finished. Although the char device is not yet exposed to the user at this stage, the sysfs entries are exposed. This can cause errors in monitoring applications that use the sysfs entries. In order to avoid this, a new state "in device creation" is introduced to ne reported when the device is not disabled but is still in init flow. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26habanalabs: fix mmu node address resolution in debugfsYuri Nudelman1-1/+1
[ Upstream commit 09ae43043c748423a5dcdc7bb1e63e4dcabe9bd6 ] The address resolution via debugfs was not taking into consideration the page offset, resulting in a wrong address. Signed-off-by: Yuri Nudelman <ynudelman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26habanalabs: add validity check for event ID received from F/WOfir Bitton2-0/+12
[ Upstream commit a6c849012b0f51c674f52384bd9a4f3dc0a33c31 ] Currently there is no validity check for event ID received from F/W, Thus exposing driver to memory overrun. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26drm/amdgpu: fix fdinfo race with process exitPhilip Yang1-2/+9
[ Upstream commit d7eff46c214c036606dd3cd305bd5a128aecfe8c ] Get process vm root BO ref in case process is exiting and root BO is freed, to avoid NULL pointer dereference backtrace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 Call Trace: amdgpu_show_fdinfo+0xfe/0x2a0 [amdgpu] seq_show+0x12c/0x180 seq_read+0x153/0x410 vfs_read+0x91/0x140[ 3427.206183] ksys_read+0x4f/0xb0 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26drm/amd/display: Fix memory leak reported by coverityAnson Jacob1-1/+5
[ Upstream commit 03388a347fe7cf7c3bdf68b0823ba316d177d470 ] Free memory allocated if any of the previous allocations failed. >>> CID 1487129: Resource leaks (RESOURCE_LEAK) >>> Variable "vpg" going out of scope leaks the storage it points to. Addresses-Coverity-ID: 1487129: ("Resource leaks") Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26drm/amdgpu: Fixes to returning VBIOS RAS EEPROM addressLuben Tuikov1-17/+33
[ Upstream commit a6a355a22f7a0efa6a11bc90b5161f394d51fe95 ] 1) Generalize the function--if the user didn't set i2c_address, still return true/false to indicate whether VBIOS contains the RAS EEPROM address. This function shouldn't evaluate whether the user set the i2c_address pointer or not. 2) Don't touch the caller's i2c_address, unless you have to--this function shouldn't have side effects. 3) Correctly set the function comment as a kernel-doc comment. Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26habanalabs: fix nullifying of destroyed mmu pgt poolTomer Tayar1-6/+6
[ Upstream commit 89aad770d692e4d2d9a604c1674e9dfa69421430 ] In case of host-resident MMU, when the page tables pool is destroyed, its pointer is not nullified correctly. As a result, on a device fini which happens after a failing reset, the already destroyed pool is accessed, which leads to a kernel panic. The patch fixes the setting of the pool pointer to NULL. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned intNiklas Söderlund1-3/+4
[ Upstream commit d3a2328e741bf6e9e6bda750e0a63832fa365a74 ] The TSC id and number of TSC ids should be stored as unsigned int as they can't be negative. Fix the datatype of the loop counter 'i' and rcar_gen3_thermal_tsc.id to reflect this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210804091818.2196806-3-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26ACPI: PM: s2idle: Run both AMD and Microsoft methods if both are supportedMario Limonciello1-28/+39
[ Upstream commit fa209644a7124b3f4cf811ced55daef49ae39ac6 ] It was reported that on "HP ENVY x360" that power LED does not come back, certain keys like brightness controls do not work, and the fan never spins up, even under load on 5.14 final. In analysis of the SSDT it's clear that the Microsoft UUID doesn't provide functional support, but rather the AMD UUID should be supporting this system. Because this is a gap in the expected logic, we checked back with internal team. The conclusion was that on Windows AMD uPEP *does* run even when Microsoft UUID present, but most OEM systems have adopted value of "0x3" for supported functions and hence nothing runs. Henceforth add support for running both Microsoft and AMD methods. This approach will also allow the same logic on Intel systems if desired at a future time as well by pulling the evaluation of `lps0_dsm_func_mask_microsoft` out of the `if` block for `acpi_s2idle_vendor_amd`. Link: https://gitlab.freedesktop.org/drm/amd/uploads/9fbcd7ec3a385cc6949c9bacf45dc41b/acpi-f.20.bin BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1691 Reported-by: Maxwell Beck <max@ryt.one> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> [ rjw: Edits of the new comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: xilinx_dma: Set DMA mask for coherent APIsRadhey Shyam Pandey1-1/+1
[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ] The xilinx dma driver uses the consistent allocations, so for correct operation also set the DMA mask for coherent APIs. It fixes the below kernel crash with dmatest client when DMA IP is configured with 64-bit address width and linux is booted from high (>4GB) memory. Call trace: [ 489.531257] dma_alloc_from_pool+0x8c/0x1c0 [ 489.535431] dma_direct_alloc+0x284/0x330 [ 489.539432] dma_alloc_attrs+0x80/0xf0 [ 489.543174] dma_pool_alloc+0x160/0x2c0 [ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180 [ 489.551524] dmatest_func+0x3cc/0x114c [ 489.555266] kthread+0x124/0x130 [ 489.558486] ret_from_fork+0x10/0x3c [ 489.562051] ---[ end trace 248625b2d596a90a ]--- Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Harini Katakam <harini.katakam@xilinx.com> Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: ioat: depends on !UMLJohannes Berg1-1/+1
[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ] Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26cxl/pci: Introduce cdevm_file_operationsDan Williams2-27/+53
[ Upstream commit 9cc238c7a526dba9ee8c210fa2828886fc65db66 ] In preparation for moving cxl_memdev allocation to the core, introduce cdevm_file_operations to coordinate file operations shutdown relative to driver data release. The motivation for moving cxl_memdev allocation to the core (beyond better file organization of sysfs attributes in core/ and drivers in cxl/), is that device lifetime is longer than module lifetime. The cxl_pci module should be free to come and go without needing to coordinate with devices that need the text associated with cxl_memdev_release() to stay resident. The move will fix a use after free bug when looping driver load / unload with CONFIG_DEBUG_KOBJECT_RELEASE=y. Another motivation for passing in file_operations to the core cxl_memdev creation flow is to allow for alternate drivers, like unit test code, to define their own ioctl backends. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162792539962.368511.2962268954245340288.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26cxl: Move cxl_core to new directoryBen Widawsky6-7/+10
[ Upstream commit 5161a55c069f53d88da49274cbef6e3c74eadea9 ] CXL core is growing, and it's already arguably unmanageable. To support future growth, move core functionality to a new directory and rename the file to represent just bus support. Future work will remove non-bus functionality. Note that mem.h is renamed to cxlmem.h to avoid a namespace collision with the global ARCH=um mem.h header. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162792537866.368511.8915631504621088321.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: sprd: Add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
[ Upstream commit 4faee8b65ec32346f8096e64c5fa1d5a73121742 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/1620094977-70146-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: depends on !UMLJohannes Berg1-1/+1
[ Upstream commit b2296eeac91555bd13f774efa7ab7d4b12fb71ef ] Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Link: https://lore.kernel.org/r/20210625103810.fe877ae0aef4.If240438e3f50ae226f3f755fc46ea498c6858393@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26of: property: Disable fw_devlink DT support for X86Saravana Kannan1-0/+3
[ Upstream commit 4a48b66b3f52aa1a8aaa8a8863891eed35769731 ] Andre reported fw_devlink=on breaking OLPC XO-1.5 [1]. OLPC XO-1.5 is an X86 system that uses a mix of ACPI and OF to populate devices. The root cause seems to be ISA devices not setting their fwnode field. But trying to figure out how to fix that doesn't seem worth the trouble because the OLPC devicetree is very sparse/limited and fw_devlink only adds the links causing this issue. Considering that there aren't many users of OF in an X86 system, simply fw_devlink DT support for X86. [1] - https://lore.kernel.org/lkml/3c1f2473-92ad-bfc4-258e-a5a08ad73dd0@web.de/ Fixes: ea718c699055 ("Revert "Revert "driver core: Set fw_devlink=on by default""") Signed-off-by: Saravana Kannan <saravanak@google.com> Cc: Andre Muller <andre.muller@web.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Andre Müller <andre.muller@web.de> Link: https://lore.kernel.org/r/20210910011446.3208894-1-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26drm/ttm: Fix a deadlock if the target BO is not idle during swapxinhui pan1-3/+3
[ Upstream commit 70982eef4d7eebb47a3b1ef25ec1bc742f3a21cf ] The ret value might be -EBUSY, caller will think lru lock is still locked but actually NOT. So return -ENOSPC instead. Otherwise we hit list corruption. ttm_bo_cleanup_refs might fail too if BO is not idle. If we return 0, caller(ttm_tt_populate -> ttm_global_swapout ->ttm_device_swapout) will be stuck as we actually did not free any BO memory. This usually happens when the fence is not signaled for a long time. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Fixes: ebd59851c796 ("drm/ttm: move swapout logic around v3") Link: https://patchwork.freedesktop.org/patch/msgid/20210907040832.1107747-1-xinhui.pan@amd.com Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26iommu/vt-d: Fix a deadlock in intel_svm_drain_prq()Fenghua Yu1-0/+12
[ Upstream commit 6ef0505158f7ca1b32763a3b038b5d11296b642b ] pasid_mutex and dev->iommu->param->lock are held while unbinding mm is flushing IO page fault workqueue and waiting for all page fault works to finish. But an in-flight page fault work also need to hold the two locks while unbinding mm are holding them and waiting for the work to finish. This may cause an ABBA deadlock issue as shown below: idxd 0000:00:0a.0: unbind PASID 2 ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc7+ #549 Not tainted [ 186.615245] ---------- dsa_test/898 is trying to acquire lock: ffff888100d854e8 (&param->lock){+.+.}-{3:3}, at: iopf_queue_flush_dev+0x29/0x60 but task is already holding lock: ffffffff82b2f7c8 (pasid_mutex){+.+.}-{3:3}, at: intel_svm_unbind+0x34/0x1e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (pasid_mutex){+.+.}-{3:3}: __mutex_lock+0x75/0x730 mutex_lock_nested+0x1b/0x20 intel_svm_page_response+0x8e/0x260 iommu_page_response+0x122/0x200 iopf_handle_group+0x1c2/0x240 process_one_work+0x2a5/0x5a0 worker_thread+0x55/0x400 kthread+0x13b/0x160 ret_from_fork+0x22/0x30 -> #1 (&param->fault_param->lock){+.+.}-{3:3}: __mutex_lock+0x75/0x730 mutex_lock_nested+0x1b/0x20 iommu_report_device_fault+0xc2/0x170 prq_event_thread+0x28a/0x580 irq_thread_fn+0x28/0x60 irq_thread+0xcf/0x180 kthread+0x13b/0x160 ret_from_fork+0x22/0x30 -> #0 (&param->lock){+.+.}-{3:3}: __lock_acquire+0x1134/0x1d60 lock_acquire+0xc6/0x2e0 __mutex_lock+0x75/0x730 mutex_lock_nested+0x1b/0x20 iopf_queue_flush_dev+0x29/0x60 intel_svm_drain_prq+0x127/0x210 intel_svm_unbind+0xc5/0x1e0 iommu_sva_unbind_device+0x62/0x80 idxd_cdev_release+0x15a/0x200 [idxd] __fput+0x9c/0x250 ____fput+0xe/0x10 task_work_run+0x64/0xa0 exit_to_user_mode_prepare+0x227/0x230 syscall_exit_to_user_mode+0x2c/0x60 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &param->lock --> &param->fault_param->lock --> pasid_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pasid_mutex); lock(&param->fault_param->lock); lock(pasid_mutex); lock(&param->lock); *** DEADLOCK *** 2 locks held by dsa_test/898: #0: ffff888100cc1cc0 (&group->mutex){+.+.}-{3:3}, at: iommu_sva_unbind_device+0x53/0x80 #1: ffffffff82b2f7c8 (pasid_mutex){+.+.}-{3:3}, at: intel_svm_unbind+0x34/0x1e0 stack backtrace: CPU: 2 PID: 898 Comm: dsa_test Not tainted 5.14.0-rc7+ #549 Hardware name: Intel Corporation Kabylake Client platform/KBL S DDR4 UD IMM CRB, BIOS KBLSE2R1.R00.X050.P01.1608011715 08/01/2016 Call Trace: dump_stack_lvl+0x5b/0x74 dump_stack+0x10/0x12 print_circular_bug.cold+0x13d/0x142 check_noncircular+0xf1/0x110 __lock_acquire+0x1134/0x1d60 lock_acquire+0xc6/0x2e0 ? iopf_queue_flush_dev+0x29/0x60 ? pci_mmcfg_read+0xde/0x240 __mutex_lock+0x75/0x730 ? iopf_queue_flush_dev+0x29/0x60 ? pci_mmcfg_read+0xfd/0x240 ? iopf_queue_flush_dev+0x29/0x60 mutex_lock_nested+0x1b/0x20 iopf_queue_flush_dev+0x29/0x60 intel_svm_drain_prq+0x127/0x210 ? intel_pasid_tear_down_entry+0x22e/0x240 intel_svm_unbind+0xc5/0x1e0 iommu_sva_unbind_device+0x62/0x80 idxd_cdev_release+0x15a/0x200 pasid_mutex protects pasid and svm data mapping data. It's unnecessary to hold pasid_mutex while flushing the workqueue. To fix the deadlock issue, unlock pasid_pasid during flushing the workqueue to allow the works to be handled. Fixes: d5b9e4bfe0d8 ("iommu/vt-d: Report prq to io-pgfault framework") Reported-and-tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20210826215918.4073446-1-fenghua.yu@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210828070622.2437559-3-baolu.lu@linux.intel.com [joro: Removed timing information from kernel log messages] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26iommu/vt-d: Fix PASID leak in intel_svm_unbind_mm()Fenghua Yu1-3/+0
[ Upstream commit a21518cb23a3c7d49bafcb59862fd389fd829d4b ] The mm->pasid will be used in intel_svm_free_pasid() after load_pasid() during unbinding mm. Clearing it in load_pasid() will cause PASID cannot be freed in intel_svm_free_pasid(). Additionally mm->pasid was updated already before load_pasid() during pasid allocation. No need to update it again in load_pasid() during binding mm. Don't update mm->pasid to avoid the issues in both binding mm and unbinding mm. Fixes: 4048377414162 ("iommu/vt-d: Use iommu_sva_alloc(free)_pasid() helpers") Reported-and-tested-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20210826215918.4073446-1-fenghua.yu@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210828070622.2437559-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26iommu/amd: Relocate GAMSup check to early_enable_iommusWei Huang1-7/+24
[ Upstream commit c3811a50addd23b9bb5a36278609ee1638debcf6 ] Currently, iommu_init_ga() checks and disables IOMMU VAPIC support (i.e. AMD AVIC support in IOMMU) when GAMSup feature bit is not set. However it forgets to clear IRQ_POSTING_CAP from the previously set amd_iommu_irq_ops.capability. This triggers an invalid page fault bug during guest VM warm reboot if AVIC is enabled since the irq_remapping_cap(IRQ_POSTING_CAP) is incorrectly set, and crash the system with the following kernel trace. BUG: unable to handle page fault for address: 0000000000400dd8 RIP: 0010:amd_iommu_deactivate_guest_mode+0x19/0xbc Call Trace: svm_set_pi_irte_mode+0x8a/0xc0 [kvm_amd] ? kvm_make_all_cpus_request_except+0x50/0x70 [kvm] kvm_request_apicv_update+0x10c/0x150 [kvm] svm_toggle_avic_for_irq_window+0x52/0x90 [kvm_amd] svm_enable_irq_window+0x26/0xa0 [kvm_amd] vcpu_enter_guest+0xbbe/0x1560 [kvm] ? avic_vcpu_load+0xd5/0x120 [kvm_amd] ? kvm_arch_vcpu_load+0x76/0x240 [kvm] ? svm_get_segment_base+0xa/0x10 [kvm_amd] kvm_arch_vcpu_ioctl_run+0x103/0x590 [kvm] kvm_vcpu_ioctl+0x22a/0x5d0 [kvm] __x64_sys_ioctl+0x84/0xc0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes by moving the initializing of AMD IOMMU interrupt remapping mode (amd_iommu_guest_ir) earlier before setting up the amd_iommu_irq_ops.capability with appropriate IRQ_POSTING_CAP flag. [joro: Squashed the two patches and limited check_features_on_all_iommus() to CONFIG_IRQ_REMAP to fix a compile warning.] Signed-off-by: Wei Huang <wei.huang2@amd.com> Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20210820202957.187572-2-suravee.suthikulpanit@amd.com Link: https://lore.kernel.org/r/20210820202957.187572-3-suravee.suthikulpanit@amd.com Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26parisc: Move pci_dev_is_behind_card_dino to where it is usedGuenter Roeck1-9/+9
[ Upstream commit 907872baa9f1538eed02ec737b8e89eba6c6e4b9 ] parisc build test images fail to compile with the following error. drivers/parisc/dino.c:160:12: error: 'pci_dev_is_behind_card_dino' defined but not used Move the function just ahead of its only caller to avoid the error. Fixes: 5fa1659105fa ("parisc: Disable HP HSC-PCI Cards to prevent kernel crash") Cc: Helge Deller <deller@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFERGeert Uytterhoeven1-0/+1
[ Upstream commit cca62758ebdd71fcfb6d589d6487a7f26398d50d ] DMA-BUF debug checks are an option of DMA-BUF. Enabling DMABUF_DEBUG without DMA_SHARED_BUFFER does not have any impact, as drivers/dma-buf/ is not entered during the build when DMA_SHARED_BUFFER is disabled. Fixes: 84335675f2223cbd ("dma-buf: Add debug option") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210902124913.2698760-3-geert@linux-m68k.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFERGeert Uytterhoeven1-0/+1
[ Upstream commit c4f3a3460a5daebc772d9263500e4099b11e7300 ] Move notify between drivers is an option of DMA-BUF. Enabling DMABUF_MOVE_NOTIFY without DMA_SHARED_BUFFER does not have any impact, as drivers/dma-buf/ is not entered during the build when DMA_SHARED_BUFFER is disabled. Fixes: bb42df4662a44765 ("dma-buf: add dynamic DMA-buf handling v15") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210902124913.2698760-2-geert@linux-m68k.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26drm/amdgpu: Disable PCIE_DPM on Intel RKL PlatformKoba Ko1-1/+16
[ Upstream commit b3dc549986eb7b38eba4a144e979dc93f386751f ] Due to high latency in PCIE clock switching on RKL platforms, switching the PCIE clock dynamically at runtime can lead to HDMI/DP audio problems. On newer asics this is handled in the SMU firmware. For SMU7-based asics, disable PCIE clock switching to avoid the issue. AMD provide a parameter to disable PICE_DPM. modprobe amdgpu ppfeaturemask=0xfff7bffb It's better to contorl PCIE_DPM in amd gpu driver, switch PCI_DPM by determining intel RKL platform for SMU7-based asics. Fixes: 1a31474cdb48 ("drm/amd/pm: workaround for audio noise issue") Ref: https://lists.freedesktop.org/archives/amd-gfx/2021-August/067413.html Signed-off-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26platform/chrome: cros_ec_trace: Fix format warningsGwendal Grignou1-3/+3
[ Upstream commit 4665584888ad2175831c972c004115741ec799e9 ] Fix printf format issues in new tracing events. Fixes: 814318242687 ("platform/chrome: cros_ec_trace: Add fields to command traces") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20210830180050.2077261-1-gwendal@chromium.org Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26platform/chrome: sensorhub: Add trace events for sampleGwendal Grignou3-1/+109
[ Upstream commit d453ceb6549af8798913de6a20444cb7200fdb69 ] Add trace event to report samples and their timestamp coming from the EC. It allows to check if the timestamps are correct and the filter is working correctly without introducing too much latency. To enable these events: cd /sys/kernel/debug/tracing/ echo 1 > events/cros_ec/enable echo 0 > events/cros_ec/cros_ec_request_start/enable echo 0 > events/cros_ec/cros_ec_request_done/enable echo 1 > tracing_on cat trace_pipe Observe event flowing: irq/105-chromeo-95 [000] .... 613.659758: cros_ec_sensorhub_timestamp: ... irq/105-chromeo-95 [000] .... 613.665219: cros_ec_sensorhub_filter: dx: ... Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: clear block on fault flag when clear wqDave Jiang1-0/+1
[ Upstream commit bd2f4ae5e019efcfadd6b491204fd60adf14f4a3 ] The block on fault flag is not cleared when we disable or reset wq. This causes it to remain set if the user does not clear it on the next configuration load. Add clear of flag in dxd_wq_disable_cleanup() routine. Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162803023553.3086015.8158952172068868803.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: fix abort status checkDave Jiang1-2/+10
[ Upstream commit b60bb6e2bfc192091b8f792781b83b5e0f9324f6 ] Coverity static analysis of linux-next found issue. The check (status == IDXD_COMP_DESC_ABORT) is always false since status was previously masked with 0x7f and IDXD_COMP_DESC_ABORT is 0xff. Fixes: 6b4b87f2c31a ("dmaengine: idxd: fix submission race window") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162698465160.3560828.18173186265683415384.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: fix wq slot allocation index checkDave Jiang1-1/+1
[ Upstream commit 673d812d30be67942762bb9e8548abb26a3ba4a7 ] The sbitmap wait and allocate routine checks the index that is returned from sbitmap_queue_get(). It should be idxd >= 0 as 0 is also a valid index. This fixes issue where submission path hangs when WQ size is 1. Fixes: 0705107fcc80 ("dmaengine: idxd: move submission to sbitmap_queue") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162697645067.3478714.506720687816951762.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: have command status always setDave Jiang1-4/+5
[ Upstream commit 53499d1fc11267e078557fc68ce943c1eb3b7a37 ] The cached command status is only set when the write back status is is passed in. Move the variable set outside of the check so it is always set. Fixes: 0d5c10b4c84d ("dmaengine: idxd: add work queue drain support") Reported-by: Ramesh Thomas <ramesh.thomas@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162274329740.1822314.3443875665504707588.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmanegine: idxd: cleanup all device related bits after disabling deviceDave Jiang4-46/+74
[ Upstream commit 0dcfe41e9a4ca759ccc87a48e3bb9cc3b08ff1e8 ] The previous state cleanup patch only performed wq state cleanups. This does not go far enough as when device is disabled or reset, the state for groups and engines must also be cleaned up. Add additional state cleanup beyond wq cleanup. Tie those cleanups directly to device disable and reset, and wq disable and reset. Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162285154108.2096632.5572805472362321307.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: mxs: Don't modify HW state in .probe() after the PWM chip was registeredUwe Kleine-König1-8/+5
commit 020162d6f49f2963062229814a56a89c86cbeaa8 upstream. This fixes a race condition: After pwmchip_add() is called there might already be a consumer and then modifying the hardware behind the consumer's back is bad. So reset before calling pwmchip_add(). Note that reseting the hardware isn't the right thing to do if the PWM is already running as it might e.g. disable (or even enable) a backlight that is supposed to be on (or off). Fixes: 4dce82c1e840 ("pwm: add pwm-mxs support") Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was ↵Uwe Kleine-König1-5/+5
registered commit 3d2813fb17e5fd0d73c1d1442ca0192bde4af10e upstream. This fixes a race condition: After pwmchip_add() is called there might already be a consumer and then modifying the hardware behind the consumer's back is bad. So set the default before. (Side-note: I don't know what this register setting actually does, if this modifies the polarity there is an inconsistency because the inversed polarity isn't considered if the PWM is already running during .probe().) Fixes: acfd92fdfb93 ("pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value") Cc: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not usedMatthias Kaehlcke1-0/+6
commit 70ee251ded6ba24c15537f4abb8a318e233d0d1a upstream. adc_tm5_register_tzd() registers the thermal zone sensors for all channels of the thermal monitor. If the registration of one channel fails the function skips the processing of the remaining channels and returns an error, which results in _probe() being aborted. One of the reasons the registration could fail is that none of the thermal zones is using the channel/sensor, which hardly is a critical error (if it is an error at all). If this case is detected emit a warning and continue with processing the remaining channels. Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reported-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210823134726.1.I1dd23ddf77e5b3568625d80d6827653af071ce19@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26PM: sleep: core: Avoid setting power.must_resume to falsePrasad Sodagudi1-1/+1
commit 4a9344cd0aa4499beb3772bbecb40bb78888c0e1 upstream. There are variables(power.may_skip_resume and dev->power.must_resume) and DPM_FLAG_MAY_SKIP_RESUME flags to control the resume of devices after a system wide suspend transition. Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows its "noirq" and "early" resume callbacks to be skipped if the device can be left in suspend after a system-wide transition into the working state. PM core determines that the driver's "noirq" and "early" resume callbacks should be skipped or not with dev_pm_skip_resume() function by checking power.may_skip_resume variable. power.must_resume variable is getting set to false in __device_suspend() function without checking device's DPM_FLAG_MAY_SKIP_RESUME settings. In problematic scenario, where all the devices in the suspend_late stage are successful and some device can fail to suspend in suspend_noirq phase. So some devices successfully suspended in suspend_late stage are not getting chance to execute __device_suspend_noirq() to set dev->power.must_resume variable to true and not getting resumed in early_resume phase. Add a check for device's DPM_FLAG_MAY_SKIP_RESUME flag before setting power.must_resume variable in __device_suspend function. Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase") Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26pwm: ab8500: Fix register offset calculation to not depend on probe orderUwe Kleine-König1-3/+14
commit eb41f334589d66b9da6f2b1acf7963ef8ca8d94e upstream. The assumption that lead to commit 5e5da1e9fbee ("pwm: ab8500: Explicitly allocate pwm chip base dynamically") was wrong: The pwm-ab8500 devices are not directly instantiated from device tree, but from the ab8500 mfd driver. So the pdev->id isn't -1, but a number between 1 and 3. Now that pwmchip ids are always allocated dynamically, this cannot easily be reverted. Introduce a new member in the driver data struct that tracks the hardware id and use this to calculate the register offset. Side-note: Using chip->base to calculate the offset was never robust because if there was already a PWM with id 1 at the time ab8500-pwm.1 was probed, the associated pwmchip would get assigned chip->base = 2 (or something bigger). Fixes: 5e5da1e9fbee ("pwm: ab8500: Explicitly allocate pwm chip base dynamically") Fixes: 6173f8f4ed9c ("pwm: Move AB8500 PWM driver to PWM framework") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()Dan Carpenter1-0/+1
commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream. This error path return success but it should propagate the negative error code from devm_clk_get(). Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210810084413.GA23810@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26n64cart: fix return value check in n64cart_probe()Yang Yingliang1-2/+2
commit 221e8360834c59f0c9952630fa5904a94ebd2bb8 upstream. In case of error, the function devm_platform_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: d9b2a2bbbb4d ("block: Add n64 cart driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20210909090608.2989716-1-yangyingliang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26staging: rtl8723bs: fix wpa_set_auth_algs() functionFabio Aiuto1-3/+3
commit b658acbf64ae38b8fca982c2929ccc0bf4eb1ea2 upstream. fix authentication algorithm constants. wpa_set_auth_algs() function contains some conditional statements masking the checked value with the wrong constants. This produces some unintentional dead code. Mask the value with the right macros. Fixes: 5befa937e8da ("staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants.") Reported-by: Colin Ian King <colin.king@canonical.com> Tested-on: Lenovo Ideapad MiiX 300-10IBY Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/20210715145700.9427-1-fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26dmaengine: acpi: Avoid comparison GSI with Linux vIRQAndy Shevchenko1-3/+7
commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream. Currently the CRST parsing relies on the fact that on most of x86 devices the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for some. Fix this by converting GSI to Linux vIRQ before checking it. Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26RDMA/mlx5: Fix xlt_chunk_align calculationNiklas Schnelle1-1/+1
commit f4c6f31011eafe027abddf6cee1288a1b5a05b73 upstream. The XLT chunk alignment depends on ent_size not sizeof(ent_size) aka sizeof(size_t). The incoming ent_size is either 8 or 16, so the miscalculation when 16 is required is only an over-alignment and functional harmless. Fixes: 8010d74b9965 ("RDMA/mlx5: Split the WR setup out of mlx5_ib_update_xlt()") Link: https://lore.kernel.org/r/20210908081849.7948-2-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26RDMA/hns: Enable stash feature of HIP09Yixing Liu1-0/+1
commit 260f64a40198309008026447f7fda277a73ed8c3 upstream. The stash feature is enabled by default on HIP09. Fixes: f93c39bc9547 ("RDMA/hns: Add support for QP stash") Fixes: bfefae9f108d ("RDMA/hns: Add support for CQ stash") Link: https://lore.kernel.org/r/1629539607-33217-3-git-send-email-liangwenpeng@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26staging: rtl8192u: Fix bitwise vs logical operator in ↵Nathan Chancellor1-1/+1
TranslateRxSignalStuff819xUsb() commit 099ec97ac92911abfb102bb5c68ed270fc12e0dd upstream. clang warns: drivers/staging/rtl8192u/r8192U_core.c:4268:20: warning: bitwise and of boolean expressions; did you mean logical and? [-Wbool-operation-and] bpacket_toself = bpacket_match_bssid & ^~~~~~~~~~~~~~~~~~~~~ && 1 warning generated. Replace the bitwise AND with a logical one to clear up the warning, as that is clearly what was intended. Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20210814235625.1780033-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 16:15:30 +0300