summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18r8169: Add device 10ec:8162 to driver r8169Janghyub Seo1-0/+1
[ Upstream commit 72f898ca0ab85fde6facf78b14d9f67a4a7b32d1 ] This patch makes the driver r8169 pick up device Realtek Semiconductor Co. , Ltd. Device [10ec:8162]. Signed-off-by: Janghyub Seo <jhyub06@gmail.com> Suggested-by: Rushab Shah <rushabshah32@gmail.com> Link: https://lore.kernel.org/r/1635231849296.1489250046.441294000@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18nvmet-tcp: fix header digest verificationAmit Engel1-1/+1
[ Upstream commit 86aeda32b887cdaeb0f4b7bfc9971e36377181c7 ] Pass the correct length to nvmet_tcp_verify_hdgst, which is the pdu header length. This fixes a wrong behaviour where header digest verification passes although the digest is wrong. Signed-off-by: Amit Engel <amit.engel@dell.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18drm: panel-orientation-quirks: Add quirk for GPD Win3Mario1-0/+6
[ Upstream commit 61b1d445f3bfe4c3ba4335ceeb7e8ba688fd31e2 ] Fixes screen orientation for GPD Win 3 handheld gaming console. Signed-off-by: Mario Risoldi <awxkrnl@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211026112737.9181-1-awxkrnl@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18watchdog: Fix OMAP watchdog early handlingWalter Stoll1-1/+5
[ Upstream commit cd004d8299f1dc6cfa6a4eea8f94cb45eaedf070 ] TI's implementation does not service the watchdog even if the kernel command line parameter omap_wdt.early_enable is set to 1. This patch fixes the issue. Signed-off-by: Walter Stoll <walter.stoll@duagon.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/88a8fe5229cd68fa0f1fd22f5d66666c1b7057a0.camel@duagon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18spi: spl022: fix Microwire full duplex modeThomas Perrot1-2/+3
[ Upstream commit d81d0e41ed5fe7229a2c9a29d13bad288c7cf2d2 ] There are missing braces in the function that verify controller parameters, then an error is always returned when the parameter to select Microwire frames operation is used on devices allowing it. Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com> Link: https://lore.kernel.org/r/20211022142104.1386379-1-thomas.perrot@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18nvmet-tcp: fix a memory leak when releasing a queueMaurizio Lombardi1-0/+3
[ Upstream commit 926245c7d22271307606c88b1fbb2539a8550e94 ] page_frag_free() won't completely release the memory allocated for the commands, the cache page must be explicitly freed by calling __page_frag_cache_drain(). This bug can be easily reproduced by repeatedly executing the following command on the initiator: $echo 1 > /sys/devices/virtual/nvme-fabrics/ctl/nvme0/reset_controller Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18xen/netfront: stop tx queues during live migrationDongli Zhang1-0/+8
[ Upstream commit 042b2046d0f05cf8124c26ff65dbb6148a4404fb ] The tx queues are not stopped during the live migration. As a result, the ndo_start_xmit() may access netfront_info->queues which is freed by talk_to_netback()->xennet_destroy_queues(). This patch is to netif_device_detach() at the beginning of xen-netfront resuming, and netif_device_attach() at the end of resuming. CPU A CPU B talk_to_netback() -> if (info->queues) xennet_destroy_queues(info); to free netfront_info->queues xennet_start_xmit() to access netfront_info->queues -> err = xennet_create_queues(info, &num_queues); The idea is borrowed from virtio-net. Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18gpio: mlxbf2.c: Add check for bgpio_init failureAsmaa Mnebhi1-0/+5
[ Upstream commit c0eee6fbfa2b3377f1efed10dad539abeb7312aa ] Add a check if bgpio_init fails. Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18drm: panel-orientation-quirks: Add quirk for Aya Neo 2021Bryant Mairs1-0/+6
[ Upstream commit def0c3697287f6e85d5ac68b21302966c95474f9 ] Fixes screen orientation for the Aya Neo 2021 handheld gaming console. Signed-off-by: Bryant Mairs <bryant@mai.rs> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211019142433.4295-1-bryant@mai.rs Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18mmc: winbond: don't build on M68KRandy Dunlap1-1/+1
[ Upstream commit 162079f2dccd02cb4b6654defd32ca387dd6d4d4 ] The Winbond MMC driver fails to build on ARCH=m68k so prevent that build config. Silences these build errors: ../drivers/mmc/host/wbsd.c: In function 'wbsd_request_end': ../drivers/mmc/host/wbsd.c:212:28: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration] 212 | dmaflags = claim_dma_lock(); ../drivers/mmc/host/wbsd.c:215:17: error: implicit declaration of function 'release_dma_lock'; did you mean 'release_task'? [-Werror=implicit-function-declaration] 215 | release_dma_lock(dmaflags); Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211017175949.23838-1-rdunlap@infradead.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18reset: socfpga: add empty driver allowing consumers to probePaweł Anikiel1-0/+26
[ Upstream commit 3ad60b4b3570937f3278509fe6797a5093ce53f8 ] The early reset driver doesn't ever probe, which causes consuming devices to be unable to probe. Add an empty driver to set this device as available, allowing consumers to probe. Signed-off-by: Paweł Anikiel <pan@semihalf.com> Link: https://lore.kernel.org/r/20210920124141.1166544-4-pan@semihalf.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18hyperv/vmbus: include linux/bitops.hArnd Bergmann1-0/+1
[ Upstream commit 8017c99680fa65e1e8d999df1583de476a187830 ] On arm64 randconfig builds, hyperv sometimes fails with this error: In file included from drivers/hv/hv_trace.c:3: In file included from drivers/hv/hyperv_vmbus.h:16: In file included from arch/arm64/include/asm/sync_bitops.h:5: arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly In file included from include/asm-generic/bitops/hweight.h:5: include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration] include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration] Include the correct header first. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18sfc: Don't use netif_info before net_device setupErik Ekman2-3/+3
[ Upstream commit bf6abf345dfa77786aca554bc58c64bd428ecb1d ] Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18sfc: Export fibre-specific supported link modesErik Ekman1-11/+26
[ Upstream commit c62041c5baa9ded3bc6fd38d3f724de70683b489 ] The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18cavium: Fix return values of the probe functionZheyu Ma1-2/+2
[ Upstream commit c69b2f46876825c726bd8a97c7fa852d8932bc32 ] During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18mISDN: Fix return values of the probe functionZheyu Ma1-4/+4
[ Upstream commit e211210098cb7490db2183d725f5c0f10463a704 ] During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18scsi: qla2xxx: Fix unmap of already freed sglDmitry Bogdanov1-9/+5
[ Upstream commit 4a8f71014b4d56c4fb287607e844c0a9f68f46d9 ] The sgl is freed in the target stack in target_release_cmd_kref() before calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that causes a panic if sgl is not yet DMA unmapped: NIP dma_direct_unmap_sg+0xdc/0x180 LR dma_direct_unmap_sg+0xc8/0x180 Call Trace: ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable) dma_unmap_sg_attrs+0x54/0xf0 qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx] qlt_free_cmd+0x124/0x1d0 [qla2xxx] tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx] target_put_sess_cmd+0x198/0x370 [target_core_mod] transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod] tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx] The sgl may be left unmapped in error cases of response sending. For instance, qlt_rdy_to_xfer() maps sgl and exits when session is being deleted keeping the sgl mapped. This patch removes use-after-free of the sgl and ensures that the sgl is unmapped for any command that was not sent to firmware. Link: https://lore.kernel.org/r/20211018122650.11846-1-d.bogdanov@yadro.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18scsi: qla2xxx: Return -ENOMEM if kzalloc() failsZheyu Ma1-1/+1
[ Upstream commit 06634d5b6e923ed0d4772aba8def5a618f44c7fe ] The driver probing function should return < 0 for failure, otherwise kernel will treat value > 0 as success. Link: https://lore.kernel.org/r/1634522181-31166-1-git-send-email-zheyuma97@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18cavium: Return negative value when pci_alloc_irq_vectors() failsZheyu Ma1-1/+1
[ Upstream commit b2cddb44bddc1a9c5949a978bb454bba863264db ] During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18media: v4l2-ioctl: Fix check_ext_ctrlsRicardo Ribalda1-21/+39
commit 861f92cb9160b14beef0ada047384c2340701ee2 upstream. Drivers that do not use the ctrl-framework use this function instead. Fix the following issues: - Do not check for multiple classes when getting the DEF_VAL. - Return -EINVAL for request_api calls - Default value cannot be changed, return EINVAL as soon as possible. - Return the right error_idx [If an error is found when validating the list of controls passed with VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to indicate to userspace that no actual hardware was touched. It would have been much nicer of course if error_idx could point to the control index that failed the validation, but sadly that's not how the API was designed.] Fixes v4l2-compliance: Control ioctls (Input 0): warn: v4l2-test-controls.cpp(834): error_idx should be equal to count warn: v4l2-test-controls.cpp(855): error_idx should be equal to count fail: v4l2-test-controls.cpp(813): doioctl(node, VIDIOC_G_EXT_CTRLS, &ctrls) test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL Buffer ioctls (Input 0): fail: v4l2-test-buffers.cpp(1994): ret != EINVAL && ret != EBADR && ret != ENOTTY test Requests: FAIL Cc: stable@vger.kernel.org Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support") Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18media: ir-kbd-i2c: improve responsiveness of hauppauge zilog receiversSean Young1-0/+1
commit c73ba202a851c0b611ef2c25e568fadeff5e667f upstream. The IR receiver has two issues: - Sometimes there is no response to a button press - Sometimes a button press is repeated when it should not have been Hanging the polling interval fixes this behaviour. Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=994050 Cc: stable@vger.kernel.org Suggested-by: Joaquín Alberto Calderón Pozo <kini_calderon@hotmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18media: rkvdec: Support dynamic resolution changesChen-Yu Tsai1-20/+20
commit 0887e9e152efbd3601d6c907e90033d25067277d upstream. The mem-to-mem stateless decoder API specifies support for dynamic resolution changes. In particular, the decoder should accept format changes on the OUTPUT queue even when buffers have been allocated, as long as it is not streaming. Relax restrictions for S_FMT as described in the previous paragraph, and as long as the codec format remains the same. This aligns it with the Hantro and Cedrus decoders. This change was mostly based on commit ae02d49493b5 ("media: hantro: Fix s_fmt for dynamic resolution changes"). Since rkvdec_s_fmt() is now just a wrapper around the output/capture variants without any additional shared functionality, drop the wrapper and call the respective functions directly. Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver") Cc: <stable@vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18media: ite-cir: IR receiver stop working after receive overflowSean Young1-1/+1
commit fdc881783099c6343921ff017450831c8766d12a upstream. On an Intel NUC6iSYK, no IR is reported after a receive overflow. When a receiver overflow occurs, this condition is only cleared by reading the fifo. Make sure we read anything in the fifo. Fixes: 28c7afb07ccf ("media: ite-cir: check for receive overflow") Suggested-by: Bryan Pass <bryan.pass@gmail.com> Tested-by: Bryan Pass <bryan.pass@gmail.com> Cc: stable@vger.kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18media: rkvdec: Do not override sizeimage for output formatChen-Yu Tsai1-2/+3
commit 298d8e8f7bcf023aceb60232d59b983255fec0df upstream. The rkvdec H.264 decoder currently overrides sizeimage for the output format. This causes issues when userspace requires and requests a larger buffer, but ends up with one of insufficient size. Instead, only provide a default size if none was requested. This fixes the video_decode_accelerator_tests from Chromium failing on the first frame due to insufficient buffer space. It also aligns the behavior of the rkvdec driver with the Hantro and Cedrus drivers. Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver") Cc: <stable@vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18crypto: s5p-sss - Add error handling in s5p_aes_probe()Tang Bin1-0/+2
commit a472cc0dde3eb057db71c80f102556eeced03805 upstream. The function s5p_aes_probe() does not perform sufficient error checking after executing platform_get_resource(), thus fix it. Fixes: c2afad6c6105 ("crypto: s5p-sss - Add HASH support for Exynos") Cc: <stable@vger.kernel.org> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18firmware/psci: fix application of sizeof to pointerjing yangyang1-1/+1
commit 2ac5fb35cd520ab1851c9a4816c523b65276052f upstream. sizeof when applied to a pointer typed expression gives the size of the pointer. ./drivers/firmware/psci/psci_checker.c:158:41-47: ERROR application of sizeof to pointer This issue was detected with the help of Coccinelle. Fixes: 7401056de5f8 ("drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests") Cc: stable@vger.kernel.org Reported-by: Zeal Robot <zealci@zte.com.cn> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18tpm: Check for integer overflow in tpm2_map_response_body()Dan Carpenter1-0/+3
commit a0bcce2b2a169e10eb265c8f0ebdd5ae4c875670 upstream. The "4 * be32_to_cpu(data->count)" multiplication can potentially overflow which would lead to memory corruption. Add a check for that. Cc: stable@vger.kernel.org Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18mmc: dw_mmc: Dont wait for DRTO on Write RSP errorChristian Löhle1-1/+2
commit 43592c8736e84025d7a45e61a46c3fa40536a364 upstream. Only wait for DRTO on reads, otherwise the driver hangs. The driver prevents sending CMD12 on response errors like CRCs. According to the comment this is because some cards have problems with this during the UHS tuning sequence. Unfortunately this workaround currently also applies for any command with data. On reads this will set the drto timer, which then triggers after a while. On writes this will not set any timer and the tasklet will not be scheduled again. I cannot test for the UHS workarounds need, but even if so, it should at most apply to reads. I have observed many hangs when CMD25 response contained a CRC error. This patch fixes this without touching the actual UHS tuning workaround. Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/af8f8b8674ba4fcc9a781019e4aeb72c@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18mmc: mtk-sd: Add wait dma stop done flowDerong Liu1-0/+5
commit 43e5fee317f4b0a48992b8b07935b1a3ac20ce84 upstream. We found this issue on a 5G platform, during CMDQ error handling, if DMA status is active when it call msdc_reset_hw(), it means mmc host hw reset and DMA transfer will be parallel, mmc host may access sram region unexpectedly. According to the programming guide of mtk-sd host, it needs to wait for dma stop done after set dma stop. This change should be applied to all SoCs. Signed-off-by: Derong Liu <derong.liu@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210827071537.1034-1-derong.liu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18scsi: qla2xxx: Fix use after free in eh_abort pathQuinn Tran1-3/+5
commit 3d33b303d4f3b74a71bede5639ebba3cfd2a2b4d upstream. In eh_abort path driver prematurely exits the call to upper layer. Check whether command is aborted / completed by firmware before exiting the call. 9 [ffff8b1ebf803c00] page_fault at ffffffffb0389778 [exception RIP: qla2x00_status_entry+0x48d] RIP: ffffffffc04fa62d RSP: ffff8b1ebf803cb0 RFLAGS: 00010082 RAX: 00000000ffffffff RBX: 00000000000e0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 00000000000013d8 RDI: fffff3253db78440 RBP: ffff8b1ebf803dd0 R8: ffff8b1ebcd9b0c0 R9: 0000000000000000 R10: ffff8b1e38a30808 R11: 0000000000001000 R12: 00000000000003e9 R13: 0000000000000000 R14: ffff8b1ebcd9d740 R15: 0000000000000028 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 10 [ffff8b1ebf803cb0] enqueue_entity at ffffffffafce708f 11 [ffff8b1ebf803d00] enqueue_task_fair at ffffffffafce7b88 12 [ffff8b1ebf803dd8] qla24xx_process_response_queue at ffffffffc04fc9a6 [qla2xxx] 13 [ffff8b1ebf803e78] qla24xx_msix_rsp_q at ffffffffc04ff01b [qla2xxx] 14 [ffff8b1ebf803eb0] __handle_irq_event_percpu at ffffffffafd50714 Link: https://lore.kernel.org/r/20210908164622.19240-10-njavali@marvell.com Fixes: f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: David Jeffery <djeffery@redhat.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Co-developed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18scsi: qla2xxx: Fix kernel crash when accessing port_speed sysfs fileArun Easi1-2/+22
commit 3ef68d4f0c9e7cb589ae8b70f07d77f528105331 upstream. Kernel crashes when accessing port_speed sysfs file. The issue happens on a CNA when the local array was accessed beyond bounds. Fix this by changing the lookup. BUG: unable to handle kernel paging request at 0000000000004000 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 15 PID: 455213 Comm: sosreport Kdump: loaded Not tainted 4.18.0-305.7.1.el8_4.x86_64 #1 RIP: 0010:string_nocheck+0x12/0x70 Code: 00 00 4c 89 e2 be 20 00 00 00 48 89 ef e8 86 9a 00 00 4c 01 e3 eb 81 90 49 89 f2 48 89 ce 48 89 f8 48 c1 fe 30 66 85 f6 74 4f <44> 0f b6 0a 45 84 c9 74 46 83 ee 01 41 b8 01 00 00 00 48 8d 7c 37 RSP: 0018:ffffb5141c1afcf0 EFLAGS: 00010286 RAX: ffff8bf4009f8000 RBX: ffff8bf4009f9000 RCX: ffff0a00ffffff04 RDX: 0000000000004000 RSI: ffffffffffffffff RDI: ffff8bf4009f8000 RBP: 0000000000004000 R08: 0000000000000001 R09: ffffb5141c1afb84 R10: ffff8bf4009f9000 R11: ffffb5141c1afce6 R12: ffff0a00ffffff04 R13: ffffffffc08e21aa R14: 0000000000001000 R15: ffffffffc08e21aa FS: 00007fc4ebfff700(0000) GS:ffff8c717f7c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000004000 CR3: 000000edfdee6006 CR4: 00000000001706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: string+0x40/0x50 vsnprintf+0x33c/0x520 scnprintf+0x4d/0x90 qla2x00_port_speed_show+0xb5/0x100 [qla2xxx] dev_attr_show+0x1c/0x40 sysfs_kf_seq_show+0x9b/0x100 seq_read+0x153/0x410 vfs_read+0x91/0x140 ksys_read+0x4f/0xb0 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca Link: https://lore.kernel.org/r/20210908164622.19240-7-njavali@marvell.com Fixes: 4910b524ac9e ("scsi: qla2xxx: Add support for setting port speed") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()Tadeusz Struk1-2/+0
commit 703535e6ae1e94c89a9c1396b4c7b6b41160ef0c upstream. No need to deduce command size in scsi_setup_scsi_cmnd() anymore as appropriate checks have been added to scsi_fill_sghdr_rq() function and the cmd_len should never be zero here. The code to do that wasn't correct anyway, as it used uninitialized cmd->cmnd, which caused a null-ptr-deref if the command size was zero as in the trace below. Fix this by removing the unneeded code. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 1822 Comm: repro Not tainted 5.15.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 Call Trace: blk_mq_dispatch_rq_list+0x7c7/0x12d0 __blk_mq_sched_dispatch_requests+0x244/0x380 blk_mq_sched_dispatch_requests+0xf0/0x160 __blk_mq_run_hw_queue+0xe8/0x160 __blk_mq_delay_run_hw_queue+0x252/0x5d0 blk_mq_run_hw_queue+0x1dd/0x3b0 blk_mq_sched_insert_request+0x1ff/0x3e0 blk_execute_rq_nowait+0x173/0x1e0 blk_execute_rq+0x15c/0x540 sg_io+0x97c/0x1370 scsi_ioctl+0xe16/0x28e0 sd_ioctl+0x134/0x170 blkdev_ioctl+0x362/0x6e0 block_ioctl+0xb0/0xf0 vfs_ioctl+0xa7/0xf0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae ---[ end trace 8b086e334adef6d2 ]--- Kernel panic - not syncing: Fatal exception Link: https://lore.kernel.org/r/20211103170659.22151-2-tadeusz.struk@linaro.org Fixes: 2ceda20f0a99 ("scsi: core: Move command size detection out of the fast path") Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: <linux-scsi@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org> Cc: <stable@vger.kernel.org> # 5.15, 5.14, 5.10 Reported-by: syzbot+5516b30f5401d4dcbcae@syzkaller.appspotmail.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18libata: fix read log timeout valueDamien Le Moal1-0/+8
commit 68dbbe7d5b4fde736d104cbbc9a2fce875562012 upstream. Some ATA drives are very slow to respond to READ_LOG_EXT and READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the device is revalidated right after resuming a system or inserting the ATA adapter driver (e.g. ahci). The default 5s timeout (ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing errors during the device configuration. Ex: ... ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209 ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133 ata9.00: qc timeout (cmd 0x2f) ata9.00: Read log page 0x00 failed, Emask 0x4 ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log page 0x08 failed, Emask 0x40 ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: ATA Identify Device Log not supported ata9.00: failed to set xfermode (err_mask=0x40) ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: configured for UDMA/133 ... The timeout error causes a soft reset of the drive link, followed in most cases by a successful revalidation as that give enough time to the drive to become fully ready to quickly process the read log commands. However, in some cases, this also fails resulting in the device being dropped. Fix this by using adding the ata_eh_revalidate_timeouts entries for the READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout increased to 15s, retriable one time. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18Input: i8042 - Add quirk for Fujitsu Lifebook T725Takashi Iwai1-0/+14
commit 16e28abb7290c4ca3b3a0f333ba067f34bb18c86 upstream. Fujitsu Lifebook T725 laptop requires, like a few other similar models, the nomux and notimeout options to probe the touchpad properly. This patch adds the corresponding quirk entries. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980 Tested-by: Neal Gompa <ngompa13@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211103070019.13374-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18Input: elantench - fix misreporting trackpoint coordinatesPhoenix Huang1-0/+13
commit be896bd3b72b44126c55768f14c22a8729b0992e upstream. Some firmwares occasionally report bogus data from trackpoint, with X or Y displacement being too large (outside of [-127, 127] range). Let's drop such packets so that we do not generate jumps. Signed-off-by: Phoenix Huang <phoenix@emc.com.tw> Tested-by: Yufei Du <yufeidu@cs.unc.edu> Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18Input: iforce - fix control-message timeoutJohan Hovold1-1/+1
commit 744d0090a5f6dfa4c81b53402ccdf08313100429 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18binder: use cred instead of task for getsecidTodd Kjos1-1/+1
commit 4d5b5539742d2554591751b4248b0204d20dcc9d upstream. Use the 'struct cred' saved at binder_open() to lookup the security ID via security_cred_getsecid(). This ensures that the security context that opened binder is the one used to generate the secctx. Cc: stable@vger.kernel.org # 5.4+ Fixes: ec74136ded79 ("binder: create node flag to request sender's security context") Signed-off-by: Todd Kjos <tkjos@google.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18binder: use cred instead of task for selinux checksTodd Kjos1-6/+6
commit 52f88693378a58094c538662ba652aff0253c4fe upstream. Since binder was integrated with selinux, it has passed 'struct task_struct' associated with the binder_proc to represent the source and target of transactions. The conversion of task to SID was then done in the hook implementations. It turns out that there are race conditions which can result in an incorrect security context being used. Fix by using the 'struct cred' saved during binder_open and pass it to the selinux subsystem. Cc: stable@vger.kernel.org # 5.14 (need backport for earlier stables) Fixes: 79af73079d75 ("Add security hooks to binder and implement the hooks for SELinux.") Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: Todd Kjos <tkjos@google.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18binder: use euid from cred instead of using taskTodd Kjos1-1/+7
commit 29bc22ac5e5bc63275e850f0c8fc549e3d0e306b upstream. Save the 'struct cred' associated with a binder process at initial open to avoid potential race conditions when converting to an euid. Set a transaction's sender_euid from the 'struct cred' saved at binder_open() instead of looking up the euid from the binder proc's 'struct task'. This ensures the euid is associated with the security context that of the task that opened binder. Cc: stable@vger.kernel.org # 4.4+ Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Signed-off-by: Todd Kjos <tkjos@google.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Jann Horn <jannh@google.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18usb: xhci: Enable runtime-pm by default on AMD Yellow Carp platformNehal Bakulchandra Shah1-0/+16
commit 660a92a59b9e831a0407e41ff62875656d30006e upstream. AMD's Yellow Carp platform supports runtime power management for XHCI Controllers, so enable the same by default for all XHCI Controllers. [ regrouped and aligned the PCI_DEVICE_ID definitions -Mathias] Cc: stable <stable@vger.kernel.org> Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211014121200.75433-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delayMathias Nyman1-1/+2
commit e1959faf085b004e6c3afaaaa743381f00e7c015 upstream. Some USB 3.1 enumeration issues were reported after the hub driver removed the minimum 100ms limit for the power-on-good delay. Since commit 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") the hub driver sets the power-on-delay based on the bPwrOn2PwrGood value in the hub descriptor. xhci driver has a 20ms bPwrOn2PwrGood value for both roothubs based on xhci spec section 5.4.8, but it's clearly not enough for the USB 3.1 devices, causing enumeration issues. Tests indicate full 100ms delay is needed. Reported-by: Walt Jr. Brake <mr.yming81@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211105160036.549516-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12rsi: fix control-message timeoutJohan Hovold1-1/+1
commit 541fd20c3ce5b0bc39f0c6a52414b6b92416831c upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Use the common control-message timeout define for the five-second timeout. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable@vger.kernel.org # 3.15 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12media: staging/intel-ipu3: css: Fix wrong size comparison imgu_css_fw_initGustavo A. R. Silva2-5/+4
commit a44f9d6f9dc1fb314a3f1ed2dcd4fbbcc3d9f892 upstream. There is a wrong comparison of the total size of the loaded firmware css->fw->size with the size of a pointer to struct imgu_fw_header. Turn binary_header into a flexible-array member[1][2], use the struct_size() helper and fix the wrong size comparison. Notice that the loaded firmware needs to contain at least one 'struct imgu_fw_info' item in the binary_header[] array. It's also worth mentioning that "css->fw->size < struct_size(css->fwp, binary_header, 1)" with binary_header declared as a flexible-array member is equivalent to "css->fw->size < sizeof(struct imgu_fw_header)" with binary_header declared as a one-element array (as in the original code). The replacement of the one-element array with a flexible-array member also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Fixes: 09d290f0ba21 ("media: staging/intel-ipu3: css: Add support for firmware management") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12staging: rtl8192u: fix control-message timeoutsJohan Hovold1-9/+9
commit 4cfa36d312d6789448b59a7aae770ac8425017a3 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging") Cc: stable@vger.kernel.org # 2.6.33 Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211025120910.6339-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12staging: r8712u: fix control-message timeoutJohan Hovold1-1/+1
commit ce4940525f36ffdcf4fa623bcedab9c2a6db893a upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel") Cc: stable@vger.kernel.org # 2.6.37 Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211025120910.6339-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12comedi: vmk80xx: fix bulk and interrupt message timeoutsJohan Hovold1-5/+7
commit a56d3e40bda460edf3f8d6aac00ec0b322b4ab83 upstream. USB bulk and interrupt message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Note that the bulk-out transfer timeout was set to the endpoint bInterval value, which should be ignored for bulk endpoints and is typically set to zero. This meant that a failing bulk-out transfer would never time out. Assume that the 10 second timeout used for all other transfers is more than enough also for the bulk-out endpoint. Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support") Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete") Cc: stable@vger.kernel.org # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20211025114532.4599-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12comedi: vmk80xx: fix bulk-buffer overflowJohan Hovold1-9/+7
commit 78cdfd62bd54af615fba9e3ca1ba35de39d3871d upstream. The driver is using endpoint-sized buffers but must not assume that the tx and rx buffers are of equal size or a malicious device could overflow the slab-allocated receive buffer when doing bulk transfers. Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support") Cc: stable@vger.kernel.org # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20211025114532.4599-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12comedi: vmk80xx: fix transfer-buffer overflowsJohan Hovold1-2/+4
commit a23461c47482fc232ffc9b819539d1f837adf2b1 upstream. The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes. Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize. Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing. The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize. Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support") Cc: stable@vger.kernel.org # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20211025114532.4599-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12comedi: ni_usb6501: fix NULL-deref in command pathsJohan Hovold1-0/+10
commit 907767da8f3a925b060c740e0b5c92ea7dbec440 upstream. The driver uses endpoint-sized USB transfer buffers but had no sanity checks on the sizes. This can lead to zero-size-pointer dereferences or overflowed transfer buffers in ni6501_port_command() and ni6501_counter_command() if a (malicious) device has smaller max-packet sizes than expected (or when doing descriptor fuzz testing). Add the missing sanity checks to probe(). Fixes: a03bb00e50ab ("staging: comedi: add NI USB-6501 support") Cc: stable@vger.kernel.org # 3.18 Cc: Luca Ellero <luca.ellero@brickedbrain.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211027093529.30896-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12comedi: dt9812: fix DMA buffers on stackJohan Hovold1-29/+86
commit 536de747bc48262225889a533db6650731ab25d3 upstream. USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail. Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data. Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is. Fixes: 63274cd7d38a ("Staging: comedi: add usb dt9812 driver") Cc: stable@vger.kernel.org # 2.6.29 Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211027093529.30896-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 00:38:33 +0300