summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-04-27ixgbe: register defines cleanupEmil Tantilov2-67/+125
Remove duplicates. Fix incorrect defines. Fix/Update comments. Fix whitespace. Add new register defines. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: explicitly disable 100H for x540Emil Tantilov1-1/+2
100H is not supported on this HW, but the bit is set on the PHY. This can result in link at 100F when advertising only 1000F. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27e1000e: implement ethtool set_phys_idBruce Allan8-59/+32
Based on a patch from Stephen Hemminger <shemminger@vyatta.com>. The new ethtool set_phys_id takes over controlling the LED for identifying boards. This fixes the lockout during that period. For this device lots of extra infrastructure can also be removed by using set_phys_id. v2: - return blink frequency for parts that do not support blink in h/w - add blink_led function pointers for devices that do support blink in h/w to cleanup the test for this functionality Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-26Merge branch 'master' of ↵David S. Miller14-78/+150
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Resolved logic conflicts causing a build failure due to drivers/net/r8169.c changes using a patch from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Update version to 3.118Matt Carlson1-2/+2
This patch updates the tg3 version to 3.118. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Whitespace cleanupsMatt Carlson1-7/+2
This patch gets rid of some harmless whitespace errors. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Add EEH supportMatt Carlson1-0/+147
This patch adds EEH support to the tg3 driver. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Add TSO loopback testMatt Carlson1-35/+123
This patch adds code to exercise the TSO portion of the device through a phy loopback test. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Organize loopback test failure flagsMatt Carlson1-8/+12
As more test modes are added to each loopback mode, the need to organise the results increases. This patch groups the results by loopback mode, and then by test mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Fix int generation hw bug for 5719 / 5720Matt Carlson2-0/+4
On the 5719 and 5720, there is a bug where the hardware will misinterpret a status tag update and leave interrupts permanently disabled. This patch enables a hardware fix that works around the issue. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25Merge branch 'for-davem' of ↵David S. Miller163-5117/+5795
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-04-25be2net: Fixed a bug in be_cmd_get_regs().Somnath Kotur1-25/+28
Same WRB entry was being reused over different iterations of a loop while issuing non-embedded IOCTL requests.Fixed couple of minor bugs in this path as well. Re-factored code to alloc/free memory for DMA outside of loop Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25bonding: move processing of recv handlers into handle_frame()Jiri Pirko7-168/+43
Since now when bonding uses rx_handler, all traffic going into bond device goes thru bond_handle_frame. So there's no need to go back into bonding code later via ptype handlers. This patch converts original ptype handlers into "bonding receive probes". These functions are called from bond_handle_frame and they are registered per-mode. Note that vlan packets are also handled because they are always untagged thanks to vlan_untag() Note that this also allows arpmon for eth-bond-bridge-vlan topology. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25Merge branch 'master' of ↵John W. Linville163-5117/+5795
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/rt2x00/rt2x00queue.c drivers/net/wireless/rt2x00/rt2x00queue.h
2011-04-25cdc_ncm: fix short packet issue on some devicesHans Petter Selasky1-2/+2
The default maximum transmit length for NCM USB frames should be so that a short packet happens at the end if the device supports a length greater than the defined maximum. This is achieved by adding 4 bytes to the maximum length so that the existing logic can fit a short packet there. Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-24Merge branch 'davem.r8169' of ↵David S. Miller1-28/+71
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-04-24r8169: don't request firmware when there's no userspace.François Romieu1-28/+71
The firmware is cached during the first successfull call to open() and released once the network device is unregistered. The driver uses the cached firmware between open() and unregister_netdev(). So far the firmware is optional : a failure to load the firmware does not prevent open() to success. It is thus necessary to 1) unregister all 816x / 810[23] devices and 2) force a driver probe to issue a new firmware load. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Ciprian Docan <docan@eden.rutgers.edu> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-04-24bnx2x: fix UDP csum offloadVladislav Zolotarov1-10/+24
Fixed packets parameters for FW in UDP checksum offload flow. Do not dereference TCP headers on non TCP frames. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-23netconsole: fix deadlock when removing net driver that netconsole is using (v2)Neil Horman1-0/+8
A deadlock was reported to me recently that occured when netconsole was being used in a virtual guest. If the virtio_net driver was removed while netconsole was setup to use an interface that was driven by that driver, the guest deadlocked. No backtrace was provided because netconsole was the only console configured, but it became clear pretty quickly what the problem was. In netconsole_netdev_event, if we get an unregister event, we call __netpoll_cleanup with the target_list_lock held and irqs disabled. __netpoll_cleanup can, if pending netpoll packets are waiting call cancel_delayed_work_sync, which is a sleeping path. the might_sleep call in that path gets triggered, causing a console warning to be issued. The netconsole write handler of course tries to take the target_list_lock again, which we already hold, causing deadlock. The fix is pretty striaghtforward. Simply drop the target_list_lock and re-enable irqs prior to calling __netpoll_cleanup, the re-acquire the lock, and restart the loop. Confirmed by myself to fix the problem reported. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-23Merge branch 'master' of ↵David S. Miller4-13/+16
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-04-22atl1c: Fix work event interrupt/task racesTim Gardner2-12/+8
The mechanism used to initiate work events from the interrupt handler has a classic read/modify/write race between the interrupt handler that sets the condition, and the worker task that reads and clears the condition. Close these races by using atomic bit fields. Cc: stable@kernel.org Cc: Jie Yang <jie.yang@atheros.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22be2net: increment work_counter in be_workerIvan Vecera1-0/+1
The commit 609ff3b ("be2net: add code to display temperature of ASIC") adds support to display temperature of ASIC but there is missing increment of work_counter in be_worker. Because of this 1) the function be_cmd_get_die_temperature is called every 1 second instead of every 32 seconds 2) be_cmd_get_die_temperature is called, although it is not supported. This patch fixes this bug. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22tg3: Add additional EEE messagingMatt Carlson1-2/+9
This patch adds link messages and an item to the sign-on banner to make EEE status more visible. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22tg3: Add macro for SMDSP togglingMatt Carlson1-56/+46
A common AUX CTRL operation in the driver is to enable and disable the SMDSP. This patch consolidates the code so that the details of the operation are in one place. This patch also adds code to make sure the SMDSP is enabled before executing code that relies on it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22tg3: Add write accessor for AUX CTRL phy regMatt Carlson2-17/+35
This patch adds a write accessor for the aux ctrl phy register. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22tg3: Add read accessor for AUX CTRL phy regMatt Carlson2-18/+38
This patch adds a read accessor for the aux ctrl register. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22tg3: Move phy accessor functions higherMatt Carlson1-68/+68
Phy accessor functions should live closer to where the base phy read / write routines are. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22tg3: Only allow phy ioctls while netif_runningMatt Carlson1-6/+2
When tg3 was new, phy accesses through ioctl were allowable at any time. Then, the driver started shutting down the phy when the device was closed. Phy accesses would be allowed when the driver first attached to the device, but then would be forbidden after the device had been up'd and down'd. After that, management firmware made it illegal to access the phy unless the driver "owned" the device. Now that most firmware is being moved over to the APE, it is less clear when phy accesses are safe. While it is possible to attempt to identify these conditions and code the driver to navigate through the pitfalls, it could be perplexing to the admin why phy accesses work in some cases and not others. This patch brings some uniformity to the problem by only allowing phy accesses while the driver has control of the device. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22tg3: Nullify RSS for loopback testMatt Carlson1-0/+9
The loopback test assumes all traffic goes to the first rx queue. There is a 1 in 4 chance this won't be true if RSS is enabled though. This patch reprograms the RSS indirection table to route all rx packets to the first queue. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22tg3: Adjust rx prod ring bd replenish thresholdsMatt Carlson2-23/+53
The oldest tg3 devices had large rx producer ring BD caches. Back then, it made sense to make the BD cache replenish threshold only a function of the number of rx buffers posted by the driver. Since then, the BD cache sizes have shrunk to 25% of their original size and, in some cases, the ring sizes have quadrupled in size. Under such conditions, static BD cache replenish thresholds no longer match the hardware constraints. This patch attempts to factor in the BD cache size into the bd cache replenish strategy, taking the existing hardware bugs into account. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22tg3: Workaround rx_discards stat bugMatt Carlson2-1/+28
The 5717, 5718, 5719 A0, and 5720 A0 has a bug where the rx_discards statistic counter will increment when dropping unwanted multicast frames. This patch works around the problem by attempting to recreate the data using other means. The resulting value will not be accurate, but it can still serve as a problem indicator. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22powerpc: Fix multicast problem in fs_enet driverAndrea Galbusera1-4/+4
mac-fec.c was setting individual UDP address registers instead of multicast group address registers when joining a multicast group. This prevented from correctly receiving UDP multicast packets. According to datasheet, replaced hash_table_high and hash_table_low with grp_hash_table_high and grp_hash_table_low respectively. Also renamed hash_table_* with grp_hash_table_* in struct fec declaration for 8xx: these registers are used only for multicast there. Tested on a MPC5121 based board. Build tested also against mpc866_ads_defconfig. Signed-off-by: Andrea Galbusera <gizero@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22mv643xx_eth: Fix build regression.David S. Miller1-1/+1
From Stephen Rothwell: -------------------- After merging the final tree, today's linux-next build (powerpc chrp32_defconfig) failed like this: drivers/net/mv643xx_eth.c: In function 'port_start': drivers/net/mv643xx_eth.c:2250: error: 'dev' undeclared (first use in this function) Caused by commit aad59c431b77 ("net: mv643xx: convert to hw_features"). -------------------- Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21iwl4965: fix skb usage after freeStanislaw Gruszka1-3/+7
Since commit a120e912eb51e347f36c71b60a1d13af74d30e83 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Feb 19 15:47:33 2010 -0800 iwlwifi: sanity check before counting number of tfds can be free we use skb->data after calling ieee80211_tx_status_irqsafe(), which could free skb instantly. On current kernels I do not observe practical problems related with bug, but on 2.6.35.y it cause random system hangs when stressing wireless link, making bisection of other problems impossible. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-21iwlwifi: fix skb usage after freeStanislaw Gruszka1-3/+7
Since commit a120e912eb51e347f36c71b60a1d13af74d30e83 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Feb 19 15:47:33 2010 -0800 iwlwifi: sanity check before counting number of tfds can be free we use skb->data after calling ieee80211_tx_status_irqsafe(), which could free skb instantly. On current kernels I do not observe practical problems related with bug, but on 2.6.35.y it cause random system hangs when stressing wireless link. Cc: stable@kernel.org # 2.6.32+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-20bonding: 802.3ad - fix agg_device_upJiri Bohac1-2/+5
The slave member of struct aggregator does not necessarily point to a slave which is part of the aggregator. It points to the slave structure containing the aggregator structure, while completely different slaves (or no slaves at all) may be part of the aggregator. The agg_device_up() function wrongly uses agg->slave to find the state of the aggregator. Use agg->lag_ports->slave instead. The bug has been introduced by commit 4cd6fe1c6483cde93e2ec91f58b7af9c9eea51ad ("bonding: fix link down handling in 802.3ad mode"). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20ehea: Fix a DLPAR bug on ehea_rereg_mrs().Breno Leitao1-3/+6
We are currently continuing if ehea_restart_qps() fails, when we do a memory DLPAR (remove or add more memory to the system). This patch just let the NAPI disabled if the ehea_restart_qps() fails. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: tun: convert to hw_featuresMichał Mirosław1-38/+25
This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: xen-netback: convert to hw_featuresMichał Mirosław2-72/+15
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: qlcnic: convert to hw_featuresMichał Mirosław5-142/+57
Bit more than minimal conversion. There might be some issues because of qlcnic_set_netdev_features() if it's called after netdev init. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: ibmveth: convert to hw_featuresMichał Mirosław1-69/+27
A minimal conversion. ibmveth_set_csum_offload() can be folded into ibmveth_set_features() and adapter->rx_csum removed - left for later cleanup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: pch_gbe: convert to hw_featuresMichał Mirosław4-74/+42
This also fixes bug in xmit path, where TX checksum offload state was used instead of skb->ip_summed to decide if the offload was needed. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: infiniband/ulp/ipoib: convert to hw_featuresMichał Mirosław5-46/+20
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: s390: convert to hw_featuresMichał Mirosław3-107/+52
options.large_send was easy to get rid of. options.checksum_type has deeper roots so is left for later cleanup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: infiniband/hw/nes: convert to hw_featuresMichał Mirosław3-54/+7
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20Staging: convert hv network driver to hw_featuresMichał Mirosław1-2/+1
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: add code to display default value of tx rate for VFsAjit Khaparde1-0/+13
This change will allow the default value of tx rate to be displayed when ip link show is called on a PF interface. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: pass domain id to be_cmd_link_status_queryAjit Khaparde4-5/+5
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: fix be_mcc_compl_process to identify eth_get_stat commandAjit Khaparde1-1/+3
eth_get_statistics and vlan_config command have same opcode. Use opcode subsystem id to differentiate one from other. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: Add code to display nic speeds other than 1Gbps/10GbpsAjit Khaparde1-0/+9
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-30 18:30:03 +0300