summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-03-15[SCSI] hpsa: move device attributes to avoid forward declarationsStephen M. Cameron1-133/+120
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-15[SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)Martin K. Petersen1-78/+105
Update scsi_debug to support the Logical Block Provisioning commands and bits as defined in SBC3r26. The old tp* parameters have been transitioned to the new lbp* scheme found in the draft standard. The old tpu option to enable UNMAP is now called lbpu. tpws to signal support for WRITE SAME(16) with the UNMAP bit set is now lbpws. Support for WRITE SAME(10) with the UNMAP bit set is also available using the lpuws10 parameter. Limiting the maximum number of blocks per WRITE SAME command has been implemented and is available via the write_same_length module parameter. As part of the renaming process the parameter lists have been sorted alphabetically (request from Doug). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-15[SCSI] sd: Logical Block Provisioning updateMartin K. Petersen3-58/+203
SBC3r26 contains many changes to the Logical Block Provisioning interfaces (formerly known as Thin Provisioning ditto). This patch implements support for both the old and new schemes using the same heuristic as before (whether the LBP VPD page is present). The new code also allows the provisioning mode (i.e. choice of command) to be overridden on a per-device basis via sysfs. Two additional modes are supported in this version: - WRITE SAME(10) with the UNMAP bit set - WRITE SAME(10) without the UNMAP bit set. This allows us to support devices that predate the TP/LBP enhancements in SBC3 and which work by way zero-detection Switching between modes has been consolidated in a helper function that also updates the block layer topology according to the limitations of the chosen command. I experimented with trying WRITE SAME(16) if UNMAP fails, WRITE SAME(10) if WRITE SAME(16) fails, etc. but found several devices that got cranky. So for now we'll disable discard if one of the commands fail. The user still has the option of selecting a different mode in sysfs. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-15[SCSI] Include protection operation in SCSI command traceMartin K. Petersen1-0/+1
When debugging DIF/DIX it is very helpful to be able to see which DIX operation is associated with the scsi_cmnd. Include the protection op in the SCSI command trace. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-15[SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)scameron@beardog.cce.hp.com1-10/+14
My first attempt was botched, got the wrong PCI Device ID (used PCI_DEVICE_ID_HP_CISSE, should have been PCI_DEVICE_ID_HP_CISSF) Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-15[SCSI] target: Fix volume size misreporting for volumes > 2TBNicholas Bellinger1-1/+7
the target infrastructure fails to send the correct conventional size to READ_CAPACITY that force a retry with READ_CAPACITY_16, which reads the capacity for devices > 2TB. Fix by adding the correct return to trigger RC(16). Reported-by: Ben Jarvis <bjarvismn@gmail.com> Signed-off-by: Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-01[SCSI] bnx2fc: Broadcom FCoE offload driverBhanu Gollapudi13-0/+9478
This driver is for Broadcom Netxtreme II 57712 chip. The following patch contains the driver sources for bnx2fc driver. libfc/libfcoe changes to enable bnx2fc have already gone through the fcoe tree. bnx2fc is a SCSI low level driver that interfaces with SCSI midlayer, libfc, libfcoe, cnic modules. bnx2fc driver uses services of libfc for slow path operations such as FIP and fabric discovery. The fast path IO perations are performed after offloading the session information to the underlying FCoE firmware. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-01[SCSI] fcoe: fix broken fcoe interface resetVasu Dev1-1/+7
Reset using "fcoeadm -r" also needs to restart FIP before doing libfc lport reset, this is needed for new switch firmware requiring FIP solicitation before doing FLOGI again during reset. So this patch does this by doing fcoe_ctlr_link_down and then fcoe_ctlr_link_up to reset the interface. The fcoe_ctlr_link_down call path also does lport reset and then fcoe_ctlr_link_up re-starts the fabric login after doing FIP solicitation first to get reset feature working again. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-01[SCSI] fcoe: precedence bug in fcoe_filter_frames()Dan Carpenter1-1/+1
Negate has higher precedence than bitwise AND. FCPHF_CRC_UNCHECKED is 0x1 so the original code is equivalent to: if (!fr_flags(fp)) { ... Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-01[SCSI] libfcoe: Remove stale fcoe-netdev entriesBhanu Prakash Gollapudi1-1/+45
When L2 driver is unloaded, libfcoe_destroy tries to access the fcoe transport structure matching the netdev. However, since the netdev is unregistered by that time, it fails to do so. Hence the stale mappings exists in the fcoe-netdev list. Handle NETDEV_UREGISTER device notification mechanism to remove the stale fcoe-netdev mapping. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-01[SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.hBhanu Prakash Gollapudi1-6/+0
both fcoe and bnx2fc drivers can access the common definition of FCOE_MTU. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-01[SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMsVasu Dev4-32/+29
EM anchors list initialization for only master port was not enough to keep npiv working as described here:- https://lists.open-fcoe.org/pipermail/devel/2011-January/011063.html So this patch moves fc_exch_mgr_list_clone to update npiv ports EMs once EM anchors list initialized. Also some cleanup, no need to set lport = NULL as that always get initialized later. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-01[SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort ↵Parikh, Neerav1-5/+2
itself is timed out" When abort for an exchange timed out it didn't release the reference to the exchange resulting in a memory leak. After discussion with the author of the patch (CC) that introduced this bug it was suggested to revert that patch. This reverts commit ea3e2e72eeb3e8a9440a5da965914f9b12088626. Signed-off by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-01[SCSI] libfc: Fixing a memory leak when destroying an interfaceParikh, Neerav1-0/+1
When an fcoe interface is being destroyed; in the process the fcoe driver will try to release all the resources it had allocated for that interface including rports. But, it seems that it does not release the reference held for the name server rport in that process resulting into a memory leak. This patch fixes that memory leak. Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Version and Changelog updateadam radford2-4/+5
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix iMR OCR support to work correctlyadam radford1-25/+37
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix max_sectors for IEEE SGLadam radford2-0/+5
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix fault state handlingadam radford1-1/+3
The following patch for megaraid_sas fixes fault state handling in megasas_transition_to_ready(). Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix tasklet_init calladam radford1-1/+1
The following patch fixes an incorrect tasklet_init() call in megasas_init_fw() to use instancet->tasklet. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Add CFG_CLEARED AENadam radford1-0/+1
The following patch for megaraid_sas adds a missing check for MR_EVT_CFG_CLEARED in megasas_aen_polling(). Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix megasas_build_dcdb_fusion to use correct LUN fieldadam radford1-2/+2
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix megasas_build_dcdb_fusion to not filter by TYPE_DISKadam radford1-2/+1
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix probe_one to clear MSI-X flags in kdumpadam radford2-1/+21
The following patch for megaraid_sas fixes megasas_probe_one() to clear MSI-X flags in kdump when the 'reset_devices' kernel parameter is passed in. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Call tasklet_schedule for MSI-Xadam radford1-1/+3
The following patch for megaraid_sas calls tasklet_schedule() even if outbound_intr_status == 0 for MFI based boards in MSI-X mode. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Enable MSI-X before calling megasas_init_fwadam radford1-12/+12
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Add missing check_and_restore_queue_depth calladam radford1-1/+5
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix failure gotosadam radford2-11/+12
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] libsas: fix loopback topology bug during discoveryjack_wang1-0/+5
In some test envirenment, there is loopback topology test. We should handle this during discovery. Signed-off-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] lpfc: block target when port queueing limit is hitMike Christie1-1/+4
Instead of blocking the entire host when the port's queueing limit is hit, we should only block the port's target. This will allow IO to other ports to execute. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] lpfc: force retry in queuecommand when port is transitioningMike Christie1-1/+1
If the port takes a while to transition we could exhaust the retries when using DID_TRANSPORT_DISRUPTED. For this case we do not want to use any of the cmd's retries, because if the command was running then when it got failed the retry counter was already incremented. And if this is the first time we are seeing the command, (it got queued because it slipped through during the race) then it should not have its retries incremented. The fc class will decide the correct handling later. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Update version number to 8.03.07.00Madhuranath Iyengar1-2/+2
We'll be using the new version number scheme from now on. The 'k' in the version in the past will be removed. The format will be: <major>.<minor>.<sub_minor>.<iter> A scsi-misc submission increments <sub_minor> and resets <iter>. An scsi-rc-fixes submission, increments <iter>. Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Check return value of fc_block_scsi_eh()Andrew Vasquez1-9/+20
The fc_block_scsi_eh() might return with status FAST_IO_FAIL indicating I/O has been terminated due to fast_io_fail timeout. In this case the rport is still blocked, so any error recovery will be failing on this port. Hence we need to check if the return value from fc_block_scsi_eh() is something other than 0, in which case it should just return with that status. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: The ISP82XX should be online while waiting for commands ↵Saurav Kashyap1-3/+16
completion. If adapter is not online, the driver will not process the response queue, even on getting an interrupt. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Propagate block-layer tags on submitted I/Os.Andrew Vasquez2-2/+82
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Adjust FCP_RSP response-info field check after TMF completion.Andrew Vasquez1-16/+13
Based on reading of the FCP2/4 specification, the driver cannot expect the storage device to send FCP_RSP information. Instead, the driver should interpret the data which is present in the frame to base decisions on the success or failure of the system. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Clear any stale login-states during an adapter reset.Andrew Vasquez1-0/+17
By not clearing the 'login needed' nor 'login outstanding' states for an fcport after a big-hammer (adapter reset), the driver may not properly perform a PLOGI/PRLI sequence (and lose visibility to the rport) during a follow-on SNS scan. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Pass right CT command string for CT status processing.Andrew Vasquez1-1/+1
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Don't wait for active mailbox command completion when ↵Giridhar Malavali1-7/+7
firmware is hung. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Abort pending commands for faster recovery during ISP reset.Giridhar Malavali6-61/+125
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Display nport_id when any SNS command fails.Giridhar Malavali1-6/+13
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Reinitialize the device initialize timeout value after reset ↵Giridhar Malavali1-0/+2
on ISP82xx. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Fix array subscript is above array bounds in ↵Chad Dupuis1-1/+1
qla2xx_build_scsi_type_6_iocbs(). The additional increment of dsd_seg was causing the compiler to throw an array out of bounds warning. This patch moves to a direct assignment of cmd_pkt->fcp_data_dseg_len so that the compiler doesn't generate an array out bounds warning. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] qla2xxx: Remove host_lock in queuecommand functionMadhuranath Iyengar1-16/+6
Also in qla_os.c, rename the function, remove DEF_SCSI_QCMD, etc. Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] zfcp: Add information to symbolic port name when running in NPIV modeChristof Schmitt7-0/+169
Query the FC symbolic port name for reporting in the fc_host sysfs and enable the symbolic_name attribute in the fc_host sysfs. When running in NPIV mode, extend the symbolic port name with the devno and the hostname. This allows better identification of Linux systems for SAN and storage administrators. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] zfcp: Move SCSI host and transport templates out of struct zfcp_dataChristof Schmitt4-48/+48
The SCSI host and transport templates are the only members left in the global zfcp_data struct. Move them out of zfcp_data and remove the now unused zfcp_data struct. Also update the names of the register and unregister functions to use the zfcp_scsi prefix. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] zfcp: Merge FCP task management setup with regular FCP command setupChristof Schmitt2-16/+10
For task management commands, only LUN and flags are required. The regular FCP setup already sets the LUN in the fcp_cmnd. All is required for merging the function is setting up the TM flags. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] zfcp: Move qtcb kmem_cache to zfcp_fsf.cChristof Schmitt4-9/+11
Move the kmem_cache for allocating the qtcb to zfcp_fsf.c and rename it accordingly. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] zfcp: Use common FC kmem_cache for GPN_FT requestChristof Schmitt4-87/+35
Switch the allocation of the GPN_FT request data to the FC kmem_cache and remove the zfcp_gpn kmem_cache. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] zfcp: Allocate GID_PN data through new FC kmem_cacheChristof Schmitt4-70/+46
Allocate the data for the GID_PN request through the new FC kmem_cache. While updating the GID_PN code, also introduce a helper function for initializing the CT header for FC nameserver requests. Remove the "paranoia" check as well, the GID_PN request data does not suddenly change. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-25[SCSI] zfcp: Introduce new kmem_cache for FC request and response dataChristof Schmitt5-42/+47
A data buffer that is passed to the hardware must not cross a page boundary. zfcp uses a series of kmem_caches to align the data to not cross a page boundary. Introduce a new kmem_cache for the FC requests sent from the zfcp driver and use it for the ELS ADISC data. The goal is to migrate to the FC kmem_cache in later patches and remove the request specific kmem_caches. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>