summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2026-04-30Buffer overflow in drivers/xen/sys-hypervisor.cJuergen Gross1-2/+6
commit 27fdbab4221b375de54bf91919798d88520c6e28 upstream. The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is neither NUL terminated nor a string. The first causes a buffer overflow as sprintf in buildid_show will read and copy till it finds a NUL. 00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P| 00000010 b9 a8 01 42 6f 2e 32 |...Bo.2| 00000017 So use a memcpy instead of sprintf to have the correct value: 00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P| 00000010 b9 a8 01 42 |...B| 00000014 (the above have a hack to embed a zero inside and check it's returned correctly). This is XSA-485 / CVE-2026-31786 Fixes: 84b7625728ea ("xen: add sysfs node for hypervisor build id") Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-30xen/privcmd: fix double free via VMA splittingJuergen Gross1-0/+7
commit 24daca4fc07f3ff8cd0e3f629cd982187f48436a upstream. privcmd_vm_ops defines .close (privcmd_close), but neither .may_split nor .open. When userspace does a partial munmap() on a privcmd mapping, the kernel splits the VMA via __split_vma(). Since may_split is NULL, the split is allowed. vm_area_dup() copies vm_private_data (a pages array allocated in alloc_empty_pages()) into the new VMA without any fixup, because there is no .open callback. Both VMAs now point to the same pages array. When the unmapped portion is closed, privcmd_close() calls: - xen_unmap_domain_gfn_range() - xen_free_unpopulated_pages() - kvfree(pages) The surviving VMA still holds the dangling pointer. When it is later destroyed, the same sequence runs again, which leads to a double free. Fix this issue by adding a .may_split callback denying the VMA split. This is XSA-487 / CVE-2026-31787 Fixes: d71f513985c2 ("xen: privcmd: support autotranslated physmap guests.") Reported-by: Atharva Vartak <atharva.a.vartak@gmail.com> Suggested-by: Atharva Vartak <atharva.a.vartak@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18Revert "PCI: Enable ACS after configuring IOMMU for OF platforms"Manivannan Sadhasivam3-10/+9
This reverts commit 573497f350b3cdb526c8c38955ddd287c5d4cc53 which is commit c41e2fb67e26b04d919257875fa954aa5f6e392e upstream. The original commit attempted to enable ACS in pci_dma_configure() prior to IOMMU group assignment in iommu_init_device() to fix the ACS enablement issue for OF platforms. But that assumption doesn't hold true for kernel versions prior to v6.15, because on these older kernels, pci_dma_configure() is called *after* iommu_init_device(). So the IOMMU groups are already created before the ACS gets enabled. This causes the devices that should have been split into separate groups by ACS, getting merged into one group, thereby breaking the IOMMU isolation as reported on the AMD machines. So revert the offending commit to restore the IOMMU group assignment on those affected machines. It should be noted that ACS has never really worked on kernel versions prior to v6.15, so the revert doesn't make any difference for OF platforms. Reported-by: John Hancock <john@kernel.doghat.io> Reported-by: bjorn.forsman@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221234 Fixes: b20b659c2c6a ("PCI: Enable ACS after configuring IOMMU for OF platforms") Cc: Linux kernel regressions list <regressions@lists.linux.dev> Link: https://lore.kernel.org/regressions/2c30f181-ffc6-4d63-a64e-763cf4528f48@leemhuis.info Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()Yang Yingliang1-6/+12
commit 39af728649b05e88a2b40e714feeee6451c3f18e upstream. The 'parent' returned by fwnode_graph_get_port_parent() with refcount incremented when 'prev' is not NULL, it needs be put when finish using it. Because the parent is const, introduce a new variable to store the returned fwnode, then put it before returning from fwnode_graph_get_next_endpoint(). Fixes: b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-and-tested-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20221123022542.2999510-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18device property: Allow secondary lookup in fwnode_get_next_child_node()Andy Shevchenko1-14/+13
[ Upstream commit 2692c614f8f05929d692b3dbfd3faef1f00fbaf0 ] When device_get_child_node_count() got split to the fwnode and device respective APIs, the fwnode didn't inherit the ability to traverse over the secondary fwnode. Hence any user, that switches from device to fwnode API misses this feature. In particular, this was revealed by the commit 1490cbb9dbfd ("device property: Split fwnode_get_child_node_count()") that effectively broke the GPIO enumeration on Intel Galileo boards. Fix this by moving the secondary lookup from device to fwnode API. Note, in general no device_*() API should go into the depth of the fwnode implementation. Fixes: 114dbb4fa7c4 ("drivers property: When no children in primary, try secondary") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://patch.msgid.link/20260210135822.47335-1-andriy.shevchenko@linux.intel.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18device property: Allow error pointer to be passed to fwnode APIsAndy Shevchenko1-38/+51
[ Upstream commit 002752af7b89b74c64fe6bec8c5fde3d3a7810d8 ] Some of the fwnode APIs might return an error pointer instead of NULL or valid fwnode handle. The result of such API call may be considered optional and hence the test for it is usually done in a form of fwnode = fwnode_find_reference(...); if (IS_ERR(fwnode)) ...error handling... Nevertheless the resulting fwnode may have bumped the reference count and hence caller of the above API is obliged to call fwnode_handle_put(). Since fwnode may be not valid either as NULL or error pointer the check has to be performed there. This approach uglifies the code and adds a point of making a mistake, i.e. forgetting about error point case. To prevent this, allow an error pointer to be passed to the fwnode APIs. Fixes: 83b34afb6b79 ("device property: Introduce fwnode_find_reference()") Reported-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Nuno Sá <nuno.sa@analog.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18device property: Check fwnode->secondary when finding propertiesDaniel Scally1-2/+11
[ Upstream commit c097af1d0a8483b44fa30e86b311991d76b6ae67 ] fwnode_property_get_reference_args() searches for named properties against a fwnode_handle, but these could instead be against the fwnode's secondary. If the property isn't found against the primary, check the secondary to see if it's there instead. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20211128232455.39332-1-djrscally@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()Daniel Scally1-1/+20
[ Upstream commit b5b41ab6b0c1bb70fe37a0d193006c969e3b5909 ] Sensor drivers often check for an endpoint to make sure that they're connected to a consuming device like a CIO2 during .probe(). Some of those endpoints might be in the form of software_nodes assigned as a secondary to the device's fwnode_handle. Account for this possibility in fwnode_graph_get_next_endpoint() to avoid having to do it in the sensor drivers themselves. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18device property: Unify access to of_nodeAndy Shevchenko1-16/+13
[ Upstream commit fb38f314fbd173e2e9f9f0f2e720a5f4889562da ] Historically we have a few variants how we access dev->fwnode and dev->of_node. Some of the functions during development gained different versions of the getters. Unify access to of_node and as a side change slightly refactor ACPI specific branches. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18device property: Retrieve fwnode from of_node via accessorAndy Shevchenko1-2/+2
[ Upstream commit 3cd8015040d7537a6b88e26f36768a90d9247829 ] OF provides a specific accessor to retrieve fwnode handle. Use it instead of direct dereferencing. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18media: device property: Return true in fwnode_device_is_available for NULL opsDaniel Scally1-0/+6
[ Upstream commit 5273382d03763277aaf8c6a2d6088e2afaee0cf0 ] Some types of fwnode_handle do not implement the device_is_available() check, such as those created by software_nodes. There isn't really a meaningful way to check for the availability of a device that doesn't actually exist, so if the check isn't implemented just assume that the "device" is present. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18device property: Add fwnode_is_ancestor_of() and fwnode_get_next_parent_dev()Saravana Kannan1-0/+52
[ Upstream commit b5d3e2fbcb10957521af14c4256cd0e5f68b9234 ] Add fwnode_is_ancestor_of() helper function to check if a fwnode is an ancestor of another fwnode. Add fwnode_get_next_parent_dev() helper function that take as input a fwnode and finds the closest ancestor fwnode that has a corresponding struct device and returns that struct device. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-11-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()Jaskaran Singh1-1/+1
commit 0a2c5495b6d1ecb0fa18ef6631450f391a888256 upstream. nvme_fc_delete_assocation() waits for pending I/O to complete before returning, and an error can cause ->ioerr_work to be queued after cancel_work_sync() had been called. Move the call to cancel_work_sync() to be after nvme_fc_delete_association() to ensure ->ioerr_work is not running when the nvme_fc_ctrl object is freed. Otherwise the following can occur: [ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL [ 1135.917705] ------------[ cut here ]------------ [ 1135.922336] kernel BUG at lib/list_debug.c:52! [ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary) [ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025 [ 1135.950969] Workqueue: 0x0 (nvme-wq) [ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f [ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b [ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046 [ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000 [ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0 [ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08 [ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100 [ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0 [ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000 [ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0 [ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1136.055910] PKRU: 55555554 [ 1136.058623] Call Trace: [ 1136.061074] <TASK> [ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.071898] ? move_linked_works+0x4a/0xa0 [ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.081744] ? __die_body.cold+0x8/0x12 [ 1136.085584] ? die+0x2e/0x50 [ 1136.088469] ? do_trap+0xca/0x110 [ 1136.091789] ? do_error_trap+0x65/0x80 [ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.101289] ? exc_invalid_op+0x50/0x70 [ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20 [ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.120806] move_linked_works+0x4a/0xa0 [ 1136.124733] worker_thread+0x216/0x3a0 [ 1136.128485] ? __pfx_worker_thread+0x10/0x10 [ 1136.132758] kthread+0xfa/0x240 [ 1136.135904] ? __pfx_kthread+0x10/0x10 [ 1136.139657] ret_from_fork+0x31/0x50 [ 1136.143236] ? __pfx_kthread+0x10/0x10 [ 1136.146988] ret_from_fork_asm+0x1a/0x30 [ 1136.150915] </TASK> Fixes: 19fce0470f05 ("nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context") Cc: stable@vger.kernel.org Tested-by: Marco Patalano <mpatalan@redhat.com> Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jaskaran Singh <jsingh@cloudlinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18Revert "nvme: nvme-fc: Ensure ->ioerr_work is cancelled in ↵Jaskaran Singh1-1/+1
nvme_fc_delete_ctrl()" This reverts commit 3d78e8e01251da032a5f7cbc9728e4ab1a5a5464. The backport of upstream commit 0a2c5495b6d1 was incorrectly applied. The cancel_work_sync() call for ->ioerr_work was added to nvme_fc_reset_ctrl_work() instead of nvme_fc_delete_ctrl(). Revert this commit so the correct fix can be applied. Signed-off-by: Jaskaran Singh <jsingh@cloudlinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18net: macb: Move devm_{free,request}_irq() out of spin lock areaKevin Hao1-5/+8
[ Upstream commit 317e49358ebbf6390fa439ef3c142f9239dd25fb ] The devm_free_irq() and devm_request_irq() functions should not be executed in an atomic context. During device suspend, all userspace processes and most kernel threads are frozen. Additionally, we flush all tx/rx status, disable all macb interrupts, and halt rx operations. Therefore, it is safe to split the region protected by bp->lock into two independent sections, allowing devm_free_irq() and devm_request_irq() to run in a non-atomic context. This modification resolves the following lockdep warning: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 501, name: rtcwake preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 0 7 locks held by rtcwake/501: #0: ffff0008038c3408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368 #1: ffff0008049a5e88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8 #2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8 #3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290 #4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0 #5: ffff800081d00458 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x48 #6: ffff0008031fb9e0 (&bp->lock){-.-.}-{3:3}, at: macb_suspend+0x144/0x558 irq event stamp: 8682 hardirqs last enabled at (8681): [<ffff8000813c7d7c>] _raw_spin_unlock_irqrestore+0x44/0x88 hardirqs last disabled at (8682): [<ffff8000813c7b58>] _raw_spin_lock_irqsave+0x38/0x98 softirqs last enabled at (7322): [<ffff8000800f1b4c>] handle_softirqs+0x52c/0x588 softirqs last disabled at (7317): [<ffff800080010310>] __do_softirq+0x20/0x2c CPU: 1 UID: 0 PID: 501 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #125 PREEMPT Hardware name: ZynqMP ZCU102 Rev1.1 (DT) Call trace: show_stack+0x24/0x38 (C) __dump_stack+0x28/0x38 dump_stack_lvl+0x64/0x88 dump_stack+0x18/0x24 __might_resched+0x200/0x218 __might_sleep+0x38/0x98 __mutex_lock_common+0x7c/0x1378 mutex_lock_nested+0x38/0x50 free_irq+0x68/0x2b0 devm_irq_release+0x24/0x38 devres_release+0x40/0x80 devm_free_irq+0x48/0x88 macb_suspend+0x298/0x558 device_suspend+0x218/0x4f0 dpm_suspend+0x244/0x3a0 dpm_suspend_start+0x50/0x78 suspend_devices_and_enter+0xec/0x560 pm_suspend+0x194/0x290 state_store+0x110/0x158 kobj_attr_store+0x1c/0x30 sysfs_kf_write+0xa8/0xd0 kernfs_fop_write_iter+0x11c/0x1c8 vfs_write+0x248/0x368 ksys_write+0x7c/0xf8 __arm64_sys_write+0x28/0x40 invoke_syscall+0x4c/0xe8 el0_svc_common+0x98/0xf0 do_el0_svc+0x28/0x40 el0_svc+0x54/0x1e0 el0t_64_sync_handler+0x84/0x130 el0t_64_sync+0x198/0x1a0 Fixes: 558e35ccfe95 ("net: macb: WoL support for GEM type of Ethernet controller") Cc: stable@vger.kernel.org Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://patch.msgid.link/20260318-macb-irq-v2-1-f1179768ab24@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ adapted WoL register writes to use MACB_BIT(MAG) instead of tmp variable ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18usb: gadget: uvc: fix NULL pointer dereference during unbind raceJimmy Hu3-6/+56
[ Upstream commit eba2936bbe6b752a31725a9eb5c674ecbf21ee7d ] Commit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly shutdown") introduced two stages of synchronization waits totaling 1500ms in uvc_function_unbind() to prevent several types of kernel panics. However, this timing-based approach is insufficient during power management (PM) transitions. When the PM subsystem starts freezing user space processes, the wait_event_interruptible_timeout() is aborted early, which allows the unbind thread to proceed and nullify the gadget pointer (cdev->gadget = NULL): [ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind() [ 814.178583][ T3173] PM: suspend entry (deep) [ 814.192487][ T3173] Freezing user space processes [ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release When the PM subsystem resumes or aborts the suspend and tasks are restarted, the V4L2 release path is executed and attempts to access the already nullified gadget pointer, triggering a kernel panic: [ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake [ 814.386727][ T3173] Restarting tasks ... [ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 [ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4 [ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94 [ 814.404078][ T4558] Call trace: [ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4 [ 814.404083][ T4558] usb_function_deactivate+0x54/0x94 [ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c [ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac [ 814.404095][ T4558] v4l2_release+0xcc/0x130 Address the race condition and NULL pointer dereference by: 1. State Synchronization (flag + mutex) Introduce a 'func_unbound' flag in struct uvc_device. This allows uvc_function_disconnect() to safely skip accessing the nullified cdev->gadget pointer. As suggested by Alan Stern, this flag is protected by a new mutex (uvc->lock) to ensure proper memory ordering and prevent instruction reordering or speculative loads. This mutex is also used to protect 'func_connected' for consistent state management. 2. Explicit Synchronization (completion) Use a completion to synchronize uvc_function_unbind() with the uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by ensuring struct uvc_device is freed after all video device resources are released. Fixes: b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly shutdown") Cc: stable <stable@kernel.org> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jimmy Hu <hhhuuu@google.com> Link: https://patch.msgid.link/20260320065427.1374555-1-hhhuuu@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ replaced guard()/scoped_guard() macros ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18usb: gadget: u_ether: Fix race between gether_disconnect and eth_stopKuen-Han Tsai1-4/+4
[ Upstream commit e1eabb072c75681f78312c484ccfffb7430f206e ] A race condition between gether_disconnect() and eth_stop() leads to a NULL pointer dereference. Specifically, if eth_stop() is triggered concurrently while gether_disconnect() is tearing down the endpoints, eth_stop() attempts to access the cleared endpoint descriptor, causing the following NPE: Unable to handle kernel NULL pointer dereference Call trace: __dwc3_gadget_ep_enable+0x60/0x788 dwc3_gadget_ep_enable+0x70/0xe4 usb_ep_enable+0x60/0x15c eth_stop+0xb8/0x108 Because eth_stop() crashes while holding the dev->lock, the thread running gether_disconnect() fails to acquire the same lock and spins forever, resulting in a hardlockup: Core - Debugging Information for Hardlockup core(7) Call trace: queued_spin_lock_slowpath+0x94/0x488 _raw_spin_lock+0x64/0x6c gether_disconnect+0x19c/0x1e8 ncm_set_alt+0x68/0x1a0 composite_setup+0x6a0/0xc50 The root cause is that the clearing of dev->port_usb in gether_disconnect() is delayed until the end of the function. Move the clearing of dev->port_usb to the very beginning of gether_disconnect() while holding dev->lock. This cuts off the link immediately, ensuring eth_stop() will see dev->port_usb as NULL and safely bail out. Fixes: 2b3d942c4878 ("usb ethernet gadget: split out network core") Cc: stable <stable@kernel.org> Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Link: https://patch.msgid.link/20260311-gether-disconnect-npe-v1-1-454966adf7c7@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18usb: gadget: f_hid: move list and spinlock inits from bind to allocMichael Zimmermann1-5/+6
[ Upstream commit 4e0a88254ad59f6c53a34bf5fa241884ec09e8b2 ] There was an issue when you did the following: - setup and bind an hid gadget - open /dev/hidg0 - use the resulting fd in EPOLL_CTL_ADD - unbind the UDC - bind the UDC - use the fd in EPOLL_CTL_DEL When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported within remove_wait_queue (via ep_remove_wait_queue). After some debugging I found out that the queues, which f_hid registers via poll_wait were the problem. These were initialized using init_waitqueue_head inside hidg_bind. So effectively, the bind function re-initialized the queues while there were still items in them. The solution is to move the initialization from hidg_bind to hidg_alloc to extend their lifetimes to the lifetime of the function instance. Additionally, I found many other possibly problematic init calls in the bind function, which I moved as well. Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/20260331184844.2388761-1-sigmaepsilon92@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error pathGuangshuo Li1-3/+3
[ Upstream commit 6dcf9d0064ce2f3e3dfe5755f98b93abe6a98e1e ] When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls kobject_put(&dbs_data->attr_set.kobj). The kobject release callback cpufreq_dbs_data_release() calls gov->exit(dbs_data) and kfree(dbs_data), but the current error path then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a double free. Keep the direct kfree(dbs_data) for the gov->init() failure path, but after kobject_init_and_add() has been called, let kobject_put() handle the cleanup through cpufreq_dbs_data_release(). Fixes: 4ebe36c94aed ("cpufreq: Fix kobject memleak") Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Link: https://patch.msgid.link/20260401024535.1395801-1-lgs201920130244@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18cpufreq: governor: Free dbs_data directly when gov->init() failsLiao Chang1-1/+3
[ Upstream commit 916f13884042f615cfbfc0b42cc68dadee826f2a ] Due to the kobject embedded in the dbs_data doest not has a release() method yet, it needs to use kfree() to free dbs_data directly when governor fails to allocate the tunner field of dbs_data. Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 6dcf9d0064ce ("cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18xen/privcmd: unregister xenstore notifier on module exitGuoHan Zhao1-0/+3
commit cd7e1fef5a1ca1c4fcd232211962ac2395601636 upstream. Commit 453b8fb68f36 ("xen/privcmd: restrict usage in unprivileged domU") added a xenstore notifier to defer setting the restriction target until Xenstore is ready. XEN_PRIVCMD can be built as a module, but privcmd_exit() leaves that notifier behind. Balance the notifier lifecycle by unregistering it on module exit. This is harmless even if xenstore was already ready at registration time and the notifier was never queued on the chain. Fixes: 453b8fb68f3641fe ("xen/privcmd: restrict usage in unprivileged domU") Signed-off-by: GuoHan Zhao <zhaoguohan@kylinos.cn> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20260325120246.252899-1-zhaoguohan@kylinos.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18net: stmmac: fix integer underflow in chain modeTyllis Xu1-5/+6
commit 51f4e090b9f87b40c21b6daadb5c06e6c0a07b67 upstream. The jumbo_frm() chain-mode implementation unconditionally computes len = nopaged_len - bmax; where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit() decides to invoke jumbo_frm() based on skb->len (total length including page fragments): is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc); When a packet has a small linear portion (nopaged_len <= bmax) but a large total length due to page fragments (skb->len > bmax), the subtraction wraps as an unsigned integer, producing a huge len value (~0xFFFFxxxx). This causes the while (len != 0) loop to execute hundreds of thousands of iterations, passing skb->data + bmax * i pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less SoCs (the typical deployment for stmmac), this maps arbitrary kernel memory to the DMA engine, constituting a kernel memory disclosure and potential memory corruption from hardware. Fix this by introducing a buf_len local variable clamped to min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then always safe: it is zero when the linear portion fits within a single descriptor, causing the while (len != 0) loop to be skipped naturally, and the fragment loop in stmmac_xmit() handles page fragments afterward. Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)") Cc: stable@vger.kernel.org Signed-off-by: Tyllis Xu <LivelyCarpet87@gmail.com> Link: https://patch.msgid.link/20260401044708.1386919-1-LivelyCarpet87@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18net: qualcomm: qca_uart: report the consumed byte on RX skb allocation failurePengpeng Hou1-1/+1
commit b76254c55dc8f23edc089027dd3f8792554c69fb upstream. qca_tty_receive() consumes each input byte before checking whether a completed frame needs a fresh receive skb. When the current byte completes a frame, the driver delivers that frame and then allocates a new skb for the next one. If that allocation fails, the current code returns i even though data[i] has already been consumed and may already have completed the delivered frame. Since serdev interprets the return value as the number of accepted bytes, this under-reports progress by one byte and can replay the final byte of the completed frame into a fresh parser state on the next call. Return i + 1 in that failure path so the accepted-byte count matches the actual receive-state progress. Fixes: dfc768fbe618 ("net: qualcomm: add QCA7000 UART driver") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260402071207.4036-1-pengpeng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18mmc: vub300: fix NULL-deref on disconnectJohan Hovold1-1/+1
commit dff34ef879c5e73298443956a8b391311ba78d57 upstream. Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()David Carlier1-0/+1
commit 6dede3967619b5944003227a5d09fdc21ed57d10 upstream. When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Cc: stable@vger.kernel.org Signed-off-by: David Carlier <devnexen@gmail.com> Link: https://patch.msgid.link/20260401211218.279185-1-devnexen@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18nfc: pn533: allocate rx skb before consuming bytesPengpeng Hou1-3/+8
commit c71ba669b570c7b3f86ec875be222ea11dacb352 upstream. pn532_receive_buf() reports the number of accepted bytes to the serdev core. The current code consumes bytes into recv_skb and may already hand a complete frame to pn533_recv_frame() before allocating a fresh receive buffer. If that alloc_skb() fails, the callback returns 0 even though it has already consumed bytes, and it leaves recv_skb as NULL for the next receive callback. That breaks the receive_buf() accounting contract and can also lead to a NULL dereference on the next skb_put_u8(). Allocate the receive skb lazily before consuming the next byte instead. If allocation fails, return the number of bytes already accepted. Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Link: https://patch.msgid.link/20260405094003.3-pn533-v2-pengpeng@iscas.ac.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18wifi: brcmsmac: Fix dma_free_coherent() sizeThomas Fourier1-1/+1
commit 12cd7632757a54ce586e36040210b1a738a0fc53 upstream. dma_alloc_consistent() may change the size to align it. The new size is saved in alloced. Change the free size to match the allocation size. Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20260218130741.46566-3-fourier.thomas@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18Input: uinput - take event lock when submitting FF request "event"Dmitry Torokhov1-0/+7
commit ff14dafde15c11403fac61367a34fea08926e9ee upstream. To avoid racing with FF playback events and corrupting device's event queue take event_lock spinlock when calling uinput_dev_event() when submitting a FF upload or erase "event". Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://patch.msgid.link/adXkf6MWzlB8LA_s@google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18Input: uinput - fix circular locking dependency with ff-coreMikhail Gavrilov1-7/+21
commit 4cda78d6f8bf2b700529f2fbccb994c3e826d7c2 upstream. A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) Fixes: ff462551235d ("Input: uinput - switch to the new FF interface") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/CABXGCsMoxag+kEwHhb7KqhuyxfmGGd0P=tHZyb1uKE0pLr8Hkg@mail.gmail.com/ Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://patch.msgid.link/20260407075031.38351-1-mikhail.v.gavrilov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18wifi: rt2x00usb: fix devres lifetimeJohan Hovold1-1/+1
commit 25369b22223d1c56e42a0cd4ac9137349d5a898e upstream. USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the USB anchor lifetime so that it is released on driver unbind. Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB") Cc: stable@vger.kernel.org # 4.7 Cc: Vishal Thanki <vishalthanki@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20260327113219.1313748-1-johan@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18usb: gadget: f_uac1_legacy: validate control request sizeTaegu Ha1-10/+37
commit 6e0e34d85cd46ceb37d16054e97a373a32770f6c upstream. f_audio_complete() copies req->length bytes into a 4-byte stack variable: u32 data = 0; memcpy(&data, req->buf, req->length); req->length is derived from the host-controlled USB request path, which can lead to a stack out-of-bounds write. Validate req->actual against the expected payload size for the supported control selectors and decode only the expected amount of data. This avoids copying a host-influenced length into a fixed-size stack object. Signed-off-by: Taegu Ha <hataegu0826@gmail.com> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/20260401191311.3604898-1-hataegu0826@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18usb: gadget: f_rndis: Protect RNDIS options with mutexKuen-Han Tsai1-0/+3
commit 8d8c68b1fc06ece60cf43e1306ff0f4ac121547e upstream. The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection. Fixes: 73517cf49bd4 ("usb: gadget: add RNDIS configfs options for class/subclass/protocol") Cc: stable@vger.kernel.org Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-2-4886b578161b@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18usb: gadget: f_subset: Fix unbalanced refcnt in geth_freeKuen-Han Tsai1-0/+7
commit caa27923aacd8a5869207842f2ab1657c6c0c7bc upstream. geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup. Fixes: 02832e56f88a ("usb: gadget: f_subset: add configfs support") Cc: stable@vger.kernel.org Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-1-4886b578161b@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18nvmet-tcp: fix use-before-check of sg in bounds validationCengiz Can1-3/+3
The stable backport of commit 52a0a9854934 ("nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec") placed the bounds checks after the iov_len calculation: while (length) { u32 iov_len = min_t(u32, length, sg->length - sg_offset); if (!sg_remaining) { /* too late: sg already dereferenced */ In mainline, the checks come first because C99 allows mid-block variable declarations. The stable backport moved the declaration to the top of the loop to satisfy C89 declaration rules, but this ended up placing the sg->length dereference before the sg_remaining and sg->length guards. If sg_next() returns NULL at the end of the scatterlist, the next iteration dereferences a NULL pointer in the iov_len calculation before the sg_remaining check can prevent it. Fix this by moving the iov_len declaration to function scope and keeping the assignment after the bounds checks, matching the ordering in mainline. Fixes: 043b4307a99f ("nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec") Cc: stable@vger.kernel.org Cc: YunJe Shin <ioerts@kookmin.ac.kr> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <kbusch@kernel.org> Cc: linux-nvme@lists.infradead.org Signed-off-by: Cengiz Can <cengiz.can@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-18usb: gadget: dummy_hcd: fix premature URB completion when ZLP follows ↵Sebastian Urban1-0/+6
partial transfer commit f50200dd44125e445a6164e88c217472fa79cdbc upstream. When a gadget request is only partially transferred in transfer() because the per-frame bandwidth budget is exhausted, the loop advances to the next queued request. If that next request is a zero-length packet (ZLP), len evaluates to zero and the code takes the unlikely(len == 0) path, which sets is_short = 1. This bypasses the bandwidth guard ("limit < ep->ep.maxpacket && limit < len") that lives in the else branch and would otherwise break out of the loop for non-zero requests. The is_short path then completes the URB before all data from the first request has been transferred. Reproducer (bulk IN, high speed): Device side (FunctionFS with Linux AIO): 1. Queue a 65024-byte write via io_submit (127 * 512, i.e. a multiple of the HS bulk max packet size). 2. Immediately queue a zero-length write (ZLP) via io_submit. Host side: 3. Submit a 65536-byte bulk IN URB. Expected: URB completes with actual_length = 65024. Actual: URB completes with actual_length = 53248, losing 11776 bytes that leak into subsequent URBs. At high speed the per-frame budget is 53248 bytes (512 * 13 * 8). The 65024-byte request exhausts this budget after 53248 bytes, leaving the request incomplete (req->req.actual < req->req.length). Neither the request nor the URB is finished, and rescan is 0, so the loop advances to the ZLP. For the ZLP, dev_len = 0, so len = min(12288, 0) = 0, taking the unlikely(len == 0) path and setting is_short = 1. The is_short handler then sets *status = 0, completing the URB with only 53248 of the expected 65024 bytes. Fix this by breaking out of the loop when the current request has remaining data (req->req.actual < req->req.length). The request resumes on the next timer tick, preserving correct data ordering. Signed-off-by: Sebastian Urban <surban@surban.net> Cc: stable <stable@kernel.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20260315151045.1155850-1-surban@surban.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18USB: dummy-hcd: Fix locking/synchronization errorAlan Stern1-1/+6
commit 616a63ff495df12863692ab3f9f7b84e3fa7a66d upstream. Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup commits, was written specifically to prevent them. As it turns out, there are (at least) two errors remaining in the code. Another patch will address the second error; this one is concerned with the first. The error responsible for the syzbot crash occurred because the stop_activity() routine will sometimes drop and then re-acquire the dum->lock spinlock. A call to stop_activity() occurs in set_link_state() when handling an emulated USB reset, after the test of dum->ints_enabled and before the increment of dum->callback_usage. This allowed another thread (doing a driver unbind) to sneak in and grab the spinlock, and then clear dum->ints_enabled and dum->driver. Normally this other thread would have to wait for dum->callback_usage to go down to 0 before it would clear dum->driver, but in this case it didn't have to wait since dum->callback_usage had not yet been incremented. The fix is to increment dum->callback_usage _before_ calling stop_activity() instead of after. Then the thread doing the unbind will not clear dum->driver until after the call to usb_gadget_udc_reset() safely returns and dum->callback_usage has been decremented again. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/68fc7c9c.050a0220.346f24.023c.GAE@google.com/ Tested-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com Fixes: 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change") Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/46135f42-fdbe-46b5-aac0-6ca70492af15@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18thunderbolt: Fix property read in nhi_wake_supported()Konrad Dybcio1-1/+1
commit 73a505dc48144ec72e25874e2b2a72487b02d3bc upstream. device_property_read_foo() returns 0 on success and only then modifies 'val'. Currently, val is left uninitialized if the aforementioned function returns non-zero, making nhi_wake_supported() return true almost always (random != 0) if the property is not present in device firmware. Invert the check to make it make sense. Fixes: 3cdb9446a117 ("thunderbolt: Add support for Intel Ice Lake") Cc: stable@vger.kernel.org Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18net: ftgmac100: fix ring allocation unwind on open failureYufan Chen1-4/+24
commit c0fd0fe745f5e8c568d898cd1513d0083e46204a upstream. ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style. Fixes: d72e01a0430f ("ftgmac100: Use a scratch buffer for failed RX allocations") Cc: stable@vger.kernel.org Signed-off-by: Yufan Chen <yufan.chen@linux.dev> Link: https://patch.msgid.link/20260328163257.60836-1-yufan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18vxlan: validate ND option lengths in vxlan_na_createYang Yang1-2/+4
commit afa9a05e6c4971bd5586f1b304e14d61fb3d9385 upstream. vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. Fixes: 4b29dba9c085 ("vxlan: fix nonfunctional neigh_reduce()") Cc: stable@vger.kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Tested-by: Ao Zhou <n05ec@lzu.edu.cn> Co-developed-by: Yuan Tan <tanyuan98@outlook.com> Signed-off-by: Yuan Tan <tanyuan98@outlook.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Yang Yang <n05ec@lzu.edu.cn> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260326034441.2037420-4-n05ec@lzu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18comedi: me4000: Fix potential overrun of firmware bufferIan Abbott1-4/+12
commit 3fb43a7a5b44713f892c58ead2e5f3a1bc9f4ee7 upstream. `me4000_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. Note: The firmware loading was totally broken before commit ac584af59945 ("staging: comedi: me4000: fix firmware downloading"), but that is the most sensible target for this fix. Fixes: ac584af59945 ("staging: comedi: me4000: fix firmware downloading") Cc: stable <stable@kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://patch.msgid.link/20260205133949.71722-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18comedi: me_daq: Fix potential overrun of firmware bufferIan Abbott1-16/+19
commit cc797d4821c754c701d9714b58bea947e31dbbe0 upstream. `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. Fixes: 85acac61096f9 ("Staging: comedi: add me_daq driver") Cc: stable <stable@kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://patch.msgid.link/20260205140130.76697-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18comedi: ni_atmio16d: Fix invalid clean-up after failed attachIan Abbott1-1/+2
commit 101ab946b79ad83b36d5cfd47de587492a80acf0 upstream. If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure. `dev->iobase` may still be set to its initial value of 0, which would result in undesired writes to low I/O port addresses. `dev->private` may still be `NULL`, which would result in null pointer dereferences. Fix `atmio16d_detach()` by checking that `dev->private` is valid (non-null) before calling `reset_atmio16d()`. This implies that `dev->iobase` was set correctly since that is set up before `dev->private`. Fixes: 2323b276308a ("Staging: comedi: add ni_at_atmio16d driver") Cc: stable <stable@kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://patch.msgid.link/20260128150011.5006-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18comedi: Reinit dev->spinlock between attachments to low-level driversIan Abbott1-0/+8
commit 4b9a9a6d71e3e252032f959fb3895a33acb5865c upstream. `struct comedi_device` is the main controlling structure for a COMEDI device created by the COMEDI subsystem. It contains a member `spinlock` containing a spin-lock that is initialized by the COMEDI subsystem, but is reserved for use by a low-level driver attached to the COMEDI device (at least since commit 25436dc9d84f ("Staging: comedi: remove RT code")). Some COMEDI devices (those created on initialization of the COMEDI subsystem when the "comedi.comedi_num_legacy_minors" parameter is non-zero) can be attached to different low-level drivers over their lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in inconsistent lock states being reported when there is a mismatch in the spin-lock locking levels used by each low-level driver to which the COMEDI device has been attached. Fix it by reinitializing `dev->spinlock` before calling the low-level driver's `attach` function pointer if `CONFIG_LOCKDEP` is enabled. Reported-by: syzbot+cc9f7f4a7df09f53c4a4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=cc9f7f4a7df09f53c4a4 Fixes: ed9eccbe8970 ("Staging: add comedi core") Cc: stable <stable@kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://patch.msgid.link/20260225132427.86578-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18comedi: dt2815: add hardware detection to prevent crashDeepanshu Kartikey1-0/+12
commit 93853512f565e625df2397f0d8050d6aafd7c3ad upstream. The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:dt2815_attach+0x6e0/0x1110 Add hardware detection by reading the status register before attempting any write operations. If the read returns 0xff, assume no hardware is present and fail the attach with -ENODEV. This prevents crashes from outb() operations on non-existent hardware. Reported-by: syzbot+72f94b474d6e50b71ffc@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Closes: https://syzkaller.appspot.com/bug?extid=72f94b474d6e50b71ffc Tested-by: syzbot+72f94b474d6e50b71ffc@syzkaller.appspotmail.com Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Link: [https://lore.kernel.org/all/20260126070458.10974-1-kartikey406@gmail.com/T/] Link: [https://lore.kernel.org/all/20260126070458.10974-1-kartikey406@gmail.com/T/ Link: https://patch.msgid.link/20260309104859.503529-1-kartikey406@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18cdc-acm: new quirk for EPSON HMDOliver Neukum2-0/+10
commit f97e96c303d689708f7f713d8f3afcc31f1237e9 upstream. This device has a union descriptor that is just garbage and needs a custom descriptor. In principle this could be done with a (conditionally activated) heuristic. That would match more devices without a need for defining a new quirk. However, this always carries the risk that the heuristics does the wrong thing and leads to more breakage. Defining the quirk and telling it exactly what to do is the safe and conservative approach. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/20260317084139.1461008-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power offClaudiu Beznea1-0/+7
commit 9ce71e85b29eb63e48e294479742e670513f03a0 upstream. Assert PLL reset on PHY power off. This saves power. [claudiu.beznea: fixed conflict in rcar_gen3_phy_usb2_power_off() by using spin_lock_irqsave()/spin_unlock_irqrestore() instead of scoped_guard()] Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-18phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver dataClaudiu Beznea1-15/+26
commit 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 upstream. The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. [claudiu.beznea: - in rcar_gen3_init_otg(): fixed conflict by droppping ch->soc_no_adp_ctrl check - in rcar_gen3_phy_usb2_irq() use spin_lock()/spin_unlock() as scoped_guard() is not avaialable in v5.10 - in probe(): replace mutex_init() with spin_lock_init() - rcar_gen3_phy_usb2_power_off() replaced scoped_guard() as it is not available in v5.10 - in rcar_gen3_phy_usb2_power_on() droppped guard to avoid compilation warning "ISO C90 forbids mixed declarations and code"] Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-18phy: renesas: rcar-gen3-usb2: Move IRQ request in probeClaudiu Beznea1-20/+26
commit de76809f60cc938d3580bbbd5b04b7d12af6ce3a upstream. Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration to init") moved the IRQ request operation from probe to struct phy_ops::phy_init API to avoid triggering interrupts (which lead to register accesses) while the PHY clocks (enabled through runtime PM APIs) are not active. If this happens, it results in a synchronous abort. One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which calls free_irq() on driver removal. Move the IRQ request and free operations back to probe, and take the runtime PM state into account in IRQ handler. This commit is preparatory for the subsequent fixes in this series. [claudiu.beznea: fixed conflicts by: - dropping irq and obint_enable_bits members of rcar_gen3_chan - using USB2_OBINT_BITS marco in rcar_gen3_phy_usb2_irq() - keeping irq local variable in rcar_gen3_phy_usb2_probe() - dropping channel->irq and channel->obint_enable_bits asssignement from probe - keeping platform_set_drvdata() and channel->dev assignment in probe] Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-18phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bindClaudiu Beznea1-18/+14
commit 54c4c58713aaff76c2422ff5750e557ab3b100d7 upstream. It has been observed on the Renesas RZ/G3S SoC that unbinding and binding the PHY driver leads to role autodetection failures. This issue occurs when PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt associated with the USB2_INT_ENABLE register (as rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called to initialize OTG without enabling PHY interrupts. To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in role_store(), role_show(), and rcar_gen3_init_otg(). At the same time, rcar_gen3_init_otg() is only called when initialization for a PHY with interrupt bits is in progress. As a result, the struct rcar_gen3_phy::otg_initialized is no longer needed. [claudiu.beznea: declare the i iterrator from rcar_gen3_is_any_otg_rphy_initialized() outside of for loop] Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-18usb: ehci-brcm: fix sleep during atomicJustin Chen1-2/+2
commit 679b771ea05ad0f8eeae83e14a91b8f4f39510c4 upstream. echi_brcm_wait_for_sof() gets called after disabling interrupts in ehci_brcm_hub_control(). Use the atomic version of poll_timeout to fix the warning. Fixes: 9df231511bd6 ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's") Cc: stable <stable@kernel.org> Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20260318185707.2588431-1-justin.chen@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-28 09:12:52 +0300