summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-04-05intel/igbvf: free irq on the error path in igbvf_request_msix()Gaosheng Cui1-2/+6
[ Upstream commit 85eb39bb39cbb5c086df1e19ba67cc1366693a77 ] In igbvf_request_msix(), irqs have not been freed on the err path, we need to free it. Fix it. Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05iavf: fix non-tunneled IPv6 UDP packet type and hashingAlexander Lobakin1-1/+1
[ Upstream commit de58647b4301fe181f9c38e8b46f7021584ae427 ] Currently, IAVF's decode_rx_desc_ptype() correctly reports payload type of L4 for IPv4 UDP packets and IPv{4,6} TCP, but only L3 for IPv6 UDP. Originally, i40e, ice and iavf were affected. Commit 73df8c9e3e3d ("i40e: Correct UDP packet header for non_tunnel-ipv6") fixed that in i40e, then commit 638a0c8c8861 ("ice: fix incorrect payload indicator on PTYPE") fixed that for ice. IPv6 UDP is L4 obviously. Fix it and make iavf report correct L4 hash type for such packets, so that the stack won't calculate it on CPU when needs it. Fixes: 206812b5fccb ("i40e/i40evf: i40e implementation for skb_set_hash") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05iavf: fix inverted Rx hash condition leading to disabled hashAlexander Lobakin1-1/+1
[ Upstream commit 32d57f667f871bc5a8babbe27ea4c5e668ee0ea8 ] Condition, which checks whether the netdev has hashing enabled is inverted. Basically, the tagged commit effectively disabled passing flow hash from descriptor to skb, unless user *disables* it via Ethtool. Commit a876c3ba59a6 ("i40e/i40evf: properly report Rx packet hash") fixed this problem, but only for i40e. Invert the condition now in iavf and unblock passing hash to skbs again. Fixes: 857942fd1aa1 ("i40e: Fix Rx hash reported to the stack by our driver") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05power: supply: da9150: Fix use after free bug in da9150_charger_remove due ↵Zheng Wang1-0/+1
to race condition [ Upstream commit 06615d11cc78162dfd5116efb71f29eb29502d37 ] In da9150_charger_probe, &charger->otg_work is bound with da9150_charger_otg_work. da9150_charger_otg_ncb may be called to start the work. If we remove the module which will call da9150_charger_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows: Fix it by canceling the work before cleanup in the da9150_charger_remove CPU0 CPUc1 |da9150_charger_otg_work da9150_charger_remove | power_supply_unregister | device_unregister | power_supply_dev_release| kfree(psy) | | | power_supply_changed(charger->usb); | //use Fixes: c1a281e34dae ("power: Add support for DA9150 Charger") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05power: supply: bq24190: Fix use after free bug in bq24190_remove due to race ↵Zheng Wang1-0/+1
condition [ Upstream commit 47c29d69212911f50bdcdd0564b5999a559010d4 ] In bq24190_probe, &bdi->input_current_limit_work is bound with bq24190_input_current_limit_work. When external power changed, it will call bq24190_charger_external_power_changed to start the work. If we remove the module which will call bq24190_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows: CPU0 CPUc1 |bq24190_input_current_limit_work bq24190_remove | power_supply_unregister | device_unregister | power_supply_dev_release| kfree(psy) | | | power_supply_get_property_from_supplier | //use Fix it by finishing the work before cleanup in the bq24190_remove Fixes: 97774672573a ("power_supply: Initialize changed_work before calling device_add") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05power: supply: bq24190_charger: using pm_runtime_resume_and_get instead of ↵Minghao Chi1-42/+21
pm_runtime_get_sync [ Upstream commit d96a89407e5f682d1cb22569d91784506c784863 ] Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: 47c29d692129 ("power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05drm/sun4i: fix missing component unbind on bind errorsJohan Hovold1-1/+3
[ Upstream commit c22f2ff8724b49dce2ae797e9fbf4bc0fa91112f ] Make sure to unbind all subcomponents when binding the aggregate device fails. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Cc: stable@vger.kernel.org # 4.7 Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230306103242.4775-1-johan+linaro@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05serial: 8250: ASPEED_VUART: select REGMAP instead of depending on itRandy Dunlap1-1/+2
[ Upstream commit f8086d1a65ac693e3fd863128352b4b11ee7324d ] REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable") Cc: stable <stable@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oskar Senft <osk@google.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05serial: 8250: SERIAL_8250_ASPEED_VUART should depend on ARCH_ASPEEDGeert Uytterhoeven1-0/+1
[ Upstream commit 806a449725cbd679a7f52c394d3c87b451d66bd5 ] The Aspeed Virtual UART is only present on Aspeed BMC platforms. Hence add a dependency on ARCH_ASPEED, to prevent asking the user about this driver when configuring a kernel without Aspeed BMC support. Reviewed-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/259138c372d433005b4871789ef9ee8d15320307.1657528861.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: f8086d1a65ac ("serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05tty: serial: fsl_lpuart: fix race on RX DMA shutdownAlexander Sverdlin1-8/+3
[ Upstream commit 1be6f2b15f902c02e055ae0b419ca789200473c9 ] From time to time DMA completion can come in the middle of DMA shutdown: <process ctx>: <IRQ>: lpuart32_shutdown() lpuart_dma_shutdown() del_timer_sync() lpuart_dma_rx_complete() lpuart_copy_rx_to_tty() mod_timer() lpuart_dma_rx_free() When the timer fires a bit later, sport->dma_rx_desc is NULL: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 pc : lpuart_copy_rx_to_tty+0xcc/0x5bc lr : lpuart_timer_func+0x1c/0x2c Call trace: lpuart_copy_rx_to_tty lpuart_timer_func call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq __irq_exit_rcu irq_exit handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler ... To fix this fold del_timer_sync() into lpuart_dma_rx_free() after dmaengine_terminate_sync() to make sure timer will not be re-started in lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete(). Fixes: 4a8588a1cf86 ("serial: fsl_lpuart: delete timer on shutdown") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20230309134302.74940-2-alexander.sverdlin@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05serial: fsl_lpuart: Fix comment typoJason Wang1-1/+1
[ Upstream commit 374e01fa1304e1eabd2cd16f750da3ecaeab069b ] The double `as' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20220803104208.4127-1-wangborong@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 1be6f2b15f90 ("tty: serial: fsl_lpuart: fix race on RX DMA shutdown") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05ipmi:ssif: Add a timer between request retriesCorey Minyard1-7/+27
[ Upstream commit 00bb7e763ec9f384cb382455cb6ba5588b5375cf ] The IPMI spec has a time (T6) specified between request retries. Add the handling for that. Reported by: Tony Camuso <tcamuso@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05ipmi:ssif: resend_msg() cannot failCorey Minyard1-21/+7
[ Upstream commit 95767ed78a181d5404202627499f9cde56053b96 ] The resend_msg() function cannot fail, but there was error handling around using it. Rework the handling of the error, and fix the out of retries debug reporting that was wrong around this, too. Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Stable-dep-of: 00bb7e763ec9 ("ipmi:ssif: Add a timer between request retries") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05ipmi:ssif: Increase the message retry timeCorey Minyard1-1/+1
[ Upstream commit 39721d62bbc16ebc9bb2bdc2c163658f33da3b0b ] The spec states that the minimum message retry time is 60ms, but it was set to 20ms. Correct it. Reported by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Stable-dep-of: 00bb7e763ec9 ("ipmi:ssif: Add a timer between request retries") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05ipmi:ssif: make ssif_i2c_send() voidLiguang Zhang1-61/+20
[ Upstream commit dcd10526ac5a0d6cc94ce60b9acfca458163277b ] This function actually needs no return value. So remove the unneeded check and make it void. Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Message-Id: <20210301140515.18951-1-zhangliguang@linux.alibaba.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Stable-dep-of: 00bb7e763ec9 ("ipmi:ssif: Add a timer between request retries") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05interconnect: qcom: osm-l3: fix icc_onecell_data allocationDmitry Baryshkov1-1/+1
[ Upstream commit f77ebdda0ee652124061c2ac42399bb6c367e729 ] This is a struct with a trailing zero-length array of icc_node pointers but it's allocated as if it were a single array of icc_nodes instead. Fortunately this overallocates memory rather then allocating less memory than required. Fix by replacing devm_kcalloc() with devm_kzalloc() and struct_size() macro. Fixes: 5bc9900addaf ("interconnect: qcom: Add OSM L3 interconnect provider support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230105002221.1416479-2-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22HID: uhid: Over-ride the default maximum data buffer value with our ownLee Jones1-0/+1
commit 1c5d4221240a233df2440fe75c881465cdf8da07 upstream. The default maximum data buffer size for this interface is UHID_DATA_MAX (4k). When data buffers are being processed, ensure this value is used when ensuring the sanity, rather than a value between the user provided value and HID_MAX_BUFFER_SIZE (16k). Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22HID: core: Provide new max_buffer_size attribute to over-ride the defaultLee Jones1-5/+13
commit b1a37ed00d7908a991c1d0f18a8cba3c2aa99bdc upstream. Presently, when a report is processed, its proposed size, provided by the user of the API (as Report Size * Report Count) is compared against the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some low-level HID drivers allocate a reduced amount of memory to their buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending this check inadequate in some cases. In these circumstances, if the received report ends up being smaller than the proposed report size, the remainder of the buffer is zeroed. That is, the space between sizeof(csize) (size of the current report) and the rsize (size proposed i.e. Report Size * Report Count), which can be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset() shoots straight past the end of the buffer boundary and starts zeroing out in-use values, often resulting in calamity. This patch introduces a new variable into 'struct hid_ll_driver' where individual low-level drivers can over-ride the default maximum value of HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the interface. Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> [Lee: Backported to v5.10.y] Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22PCI/DPC: Await readiness of secondary bus after resetLukas Wunner3-5/+8
commit 53b54ad074de1896f8b021615f65b27f557ce874 upstream. pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus Reset, but not after a DPC-induced Hot Reset. As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not observed and devices on the secondary bus may be accessed before they're ready. One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a PCIe switch whose upstream port is not immediately ready after reset. Because its config space is restored too early, it remains in D0uninitialized, its subordinate devices remain inaccessible and DPC recovery fails with messages such as: i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible) intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible) pcieport 0000:89:02.0: AER: device recovery failed Fix it. Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22PCI: Unify delay handling for reset and resumeLukas Wunner3-33/+35
commit ac91e6980563ed53afadd925fa6585ffd2bc4a2c upstream. Sheng Bi reports that pci_bridge_secondary_bus_reset() may fail to wait for devices on the secondary bus to become accessible after reset: Although it does call pci_dev_wait(), it erroneously passes the bridge's pci_dev rather than that of a child. The bridge of course is always accessible while its secondary bus is reset, so pci_dev_wait() returns immediately. Sheng Bi proposes introducing a new pci_bridge_secondary_bus_wait() function which is called from pci_bridge_secondary_bus_reset(): https://lore.kernel.org/linux-pci/20220523171517.32407-1-windy.bi.enflame@gmail.com/ However we already have pci_bridge_wait_for_secondary_bus() which does almost exactly what we need. So far it's only called on resume from D3cold (which implies a Fundamental Reset per PCIe r6.0 sec 5.8). Re-using it for Secondary Bus Resets is a leaner and more rational approach than introducing a new function. That only requires a few minor tweaks: - Amend pci_bridge_wait_for_secondary_bus() to await accessibility of the first device on the secondary bus by calling pci_dev_wait() after performing the prescribed delays. pci_dev_wait() needs two parameters, a reset reason and a timeout, which callers must now pass to pci_bridge_wait_for_secondary_bus(). The timeout is 1 sec for resume (PCIe r6.0 sec 6.6.1) and 60 sec for reset (commit 821cdad5c46c ("PCI: Wait up to 60 seconds for device to become ready after FLR")). Introduce a PCI_RESET_WAIT macro for the 1 sec timeout. - Amend pci_bridge_wait_for_secondary_bus() to return 0 on success or -ENOTTY on error for consumption by pci_bridge_secondary_bus_reset(). - Drop an unnecessary 1 sec delay from pci_reset_secondary_bus() which is now performed by pci_bridge_wait_for_secondary_bus(). A static delay this long is only necessary for Conventional PCI, so modern PCIe systems benefit from shorter reset times as a side effect. Fixes: 6b2f1351af56 ("PCI: Wait for device to become ready after secondary bus reset") Link: https://lore.kernel.org/r/da77c92796b99ec568bd070cbe4725074a117038.1673769517.git.lukas@wunner.de Reported-by: Sheng Bi <windy.bi.enflame@gmail.com> Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/i915/active: Fix misuse of non-idle barriers as fence trackersJanusz Krzysztofik1-11/+13
commit e0e6b416b25ee14716f3549e0cbec1011b193809 upstream. Users reported oopses on list corruptions when using i915 perf with a number of concurrently running graphics applications. Root cause analysis pointed at an issue in barrier processing code -- a race among perf open / close replacing active barriers with perf requests on kernel context and concurrent barrier preallocate / acquire operations performed during user context first pin / last unpin. When adding a request to a composite tracker, we try to reuse an existing fence tracker, already allocated and registered with that composite. The tracker we obtain may already track another fence, may be an idle barrier, or an active barrier. If the tracker we get occurs a non-idle barrier then we try to delete that barrier from a list of barrier tasks it belongs to. However, while doing that we don't respect return value from a function that performs the barrier deletion. Should the deletion ever fail, we would end up reusing the tracker still registered as a barrier task. Since the same structure field is reused with both fence callback lists and barrier tasks list, list corruptions would likely occur. Barriers are now deleted from a barrier tasks list by temporarily removing the list content, traversing that content with skip over the node to be deleted, then populating the list back with the modified content. Should that intentionally racy concurrent deletion attempts be not serialized, one or more of those may fail because of the list being temporary empty. Related code that ignores the results of barrier deletion was initially introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"). However, all users of the barrier deletion routine were apparently serialized at that time, then the issue didn't exhibit itself. Results of git bisect with help of a newly developed igt@gem_barrier_race@remote-request IGT test indicate that list corruptions might start to appear after commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), introduced in v5.5. Respect results of barrier deletion attempts -- mark the barrier as idle only if successfully deleted from the list. Then, before proceeding with setting our fence as the one currently tracked, make sure that the tracker we've got is not a non-idle barrier. If that check fails then don't use that tracker but go back and try to acquire a new, usable one. v3: use unlikely() to document what outcome we expect (Andi), - fix bad grammar in commit description. v2: no code changes, - blame commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"), v5.4, - reword commit description. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333 Fixes: 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org # v5.5 Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com (cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/i915: Don't use stolen memory for ring buffers with LLCJohn Harrison1-1/+1
commit 690e0ec8e63da9a29b39fedc6ed5da09c7c82651 upstream. Direction from hardware is that stolen memory should never be used for ring buffer allocations on platforms with LLC. There are too many caching pitfalls due to the way stolen memory accesses are routed. So it is safest to just not use it. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Fixes: c58b735fc762 ("drm/i915: Allocate rings from stolen") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.9+ Tested-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-2-John.C.Harrison@Intel.com (cherry picked from commit f54c1f6c697c4297f7ed94283c184acc338a5cf8) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22cpuidle: psci: Iterate backwards over list in psci_pd_remove()Shawn Guo1-1/+2
commit 6b0313c2fa3d2cf991c9ffef6fae6e7ef592ce6d upstream. In case that psci_pd_init_topology() fails for some reason, psci_pd_remove() will be responsible for deleting provider and removing genpd from psci_pd_providers list. There will be a failure when removing the cluster PD, because the cpu (child) PDs haven't been removed. [ 0.050232] CPUidle PSCI: init PM domain cpu0 [ 0.050278] CPUidle PSCI: init PM domain cpu1 [ 0.050329] CPUidle PSCI: init PM domain cpu2 [ 0.050370] CPUidle PSCI: init PM domain cpu3 [ 0.050422] CPUidle PSCI: init PM domain cpu-cluster0 [ 0.050475] PM: genpd_remove: unable to remove cpu-cluster0 [ 0.051412] PM: genpd_remove: removed cpu3 [ 0.051449] PM: genpd_remove: removed cpu2 [ 0.051499] PM: genpd_remove: removed cpu1 [ 0.051546] PM: genpd_remove: removed cpu0 Fix the problem by iterating the provider list reversely, so that parent PD gets removed after child's PDs like below. [ 0.029052] CPUidle PSCI: init PM domain cpu0 [ 0.029076] CPUidle PSCI: init PM domain cpu1 [ 0.029103] CPUidle PSCI: init PM domain cpu2 [ 0.029124] CPUidle PSCI: init PM domain cpu3 [ 0.029151] CPUidle PSCI: init PM domain cpu-cluster0 [ 0.029647] PM: genpd_remove: removed cpu0 [ 0.029666] PM: genpd_remove: removed cpu1 [ 0.029690] PM: genpd_remove: removed cpu2 [ 0.029714] PM: genpd_remove: removed cpu3 [ 0.029738] PM: genpd_remove: removed cpu-cluster0 Fixes: a65a397f2451 ("cpuidle: psci: Add support for PM domains by using genpd") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22fbdev: stifb: Provide valid pixelclock and add fb_check_var() checksHelge Deller1-0/+27
commit 203873a535d627c668f293be0cb73e26c30f9cc7 upstream. Find a valid modeline depending on the machine graphic card configuration and add the fb_check_var() function to validate Xorg provided graphics settings. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22mmc: sdhci_am654: lower power-on failed message severityFrancesco Dolcini1-1/+1
commit 11440da77d6020831ee6f9ce4551b545dea789ee upstream. Lower the power-on failed message severity from warn to info when the controller does not power-up. It's normal to have this situation when the SD card slot is empty, therefore we should not warn the user about it. Fixes: 7ca0f166f5b2 ("mmc: sdhci_am654: Add workaround for card detect debounce timer") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230306162751.163369-1-francesco@dolcini.it Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/shmem-helper: Remove another errant put in error pathDmitry Osipenko1-3/+6
commit ee9adb7a45516cfa536ca92253d7ae59d56db9e4 upstream. drm_gem_shmem_mmap() doesn't own reference in error code path, resulting in the dma-buf shmem GEM object getting prematurely freed leading to a later use-after-free. Fixes: f49a51bfdc8e ("drm/shme-helpers: Fix dma_buf_mmap forwarding bug") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230108211311.3950107-1-dmitry.osipenko@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22interconnect: fix mem leak when freeing nodesJohan Hovold1-0/+4
commit a5904f415e1af72fa8fe6665aa4f554dc2099a95 upstream. The node link array is allocated when adding links to a node but is not deallocated when nodes are destroyed. Fixes: 11f1ceca7031 ("interconnect: Add generic on-chip interconnect API") Cc: stable@vger.kernel.org # 5.1 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board Link: https://lore.kernel.org/r/20230306075651.2449-2-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22firmware: xilinx: don't make a sleepable memory allocation from an atomic ↵Roman Gushchin1-1/+1
context commit 38ed310c22e7a0fc978b1f8292136a4a4a8b3051 upstream. The following issue was discovered using lockdep: [ 6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209 [ 6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0 [ 6.702431] 2 locks held by swapper/0/1: [ 6.706300] #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90 [ 6.714900] #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140 [ 6.723156] irq event stamp: 304030 [ 6.726596] hardirqs last enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0 [ 6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140 [ 6.744742] softirqs last enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894 [ 6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280 [ 6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G U 5.15.36 #2 [ 6.768048] Hardware name: xlnx,zynqmp (DT) [ 6.772179] Call trace: [ 6.774584] dump_backtrace+0x0/0x300 [ 6.778197] show_stack+0x18/0x30 [ 6.781465] dump_stack_lvl+0xb8/0xec [ 6.785077] dump_stack+0x1c/0x38 [ 6.788345] ___might_sleep+0x1a8/0x2a0 [ 6.792129] __might_sleep+0x6c/0xd0 [ 6.795655] kmem_cache_alloc_trace+0x270/0x3d0 [ 6.800127] do_feature_check_call+0x100/0x220 [ 6.804513] zynqmp_pm_invoke_fn+0x8c/0xb0 [ 6.808555] zynqmp_pm_clock_getstate+0x90/0xe0 [ 6.813027] zynqmp_pll_is_enabled+0x8c/0x120 [ 6.817327] zynqmp_pll_enable+0x38/0xc0 [ 6.821197] clk_core_enable+0x144/0x400 [ 6.825067] clk_core_enable+0xd4/0x400 [ 6.828851] clk_core_enable+0xd4/0x400 [ 6.832635] clk_core_enable+0xd4/0x400 [ 6.836419] clk_core_enable+0xd4/0x400 [ 6.840203] clk_core_enable+0xd4/0x400 [ 6.843987] clk_core_enable+0xd4/0x400 [ 6.847771] clk_core_enable+0xd4/0x400 [ 6.851555] clk_core_enable_lock+0x24/0x50 [ 6.855683] clk_enable+0x24/0x40 [ 6.858952] fclk_probe+0x84/0xf0 [ 6.862220] platform_probe+0x8c/0x110 [ 6.865918] really_probe+0x110/0x5f0 [ 6.869530] __driver_probe_device+0xcc/0x210 [ 6.873830] driver_probe_device+0x64/0x140 [ 6.877958] __driver_attach+0x114/0x1f0 [ 6.881828] bus_for_each_dev+0xe8/0x160 [ 6.885698] driver_attach+0x34/0x50 [ 6.889224] bus_add_driver+0x228/0x300 [ 6.893008] driver_register+0xc0/0x1e0 [ 6.896792] __platform_driver_register+0x44/0x60 [ 6.901436] fclk_driver_init+0x1c/0x28 [ 6.905220] do_one_initcall+0x104/0x590 [ 6.909091] kernel_init_freeable+0x254/0x2bc [ 6.913390] kernel_init+0x24/0x130 [ 6.916831] ret_from_fork+0x10/0x20 Fix it by passing the GFP_ATOMIC gfp flag for the corresponding memory allocation. Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check") Cc: stable <stable@kernel.org> Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20230308222602.123866-1-roman.gushchin@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22serial: 8250_em: Fix UART port typeBiju Das1-2/+2
commit 32e293be736b853f168cd065d9cbc1b0c69f545d upstream. As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART IP found on EMMA mobile SoC is Register-compatible with the general-purpose 16750 UART chip. Fix UART port type as 16750 and enable 64-bytes fifo support. Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22tty: serial: fsl_lpuart: skip waiting for transmission complete when ↵Sherry Sun1-3/+9
UARTCTRL_SBK is asserted commit 2411fd94ceaa6e11326e95d6ebf876cbfed28d23 upstream. According to LPUART RM, Transmission Complete Flag becomes 0 if queuing a break character by writing 1 to CTRL[SBK], so here need to skip waiting for transmission complete when UARTCTRL_SBK is asserted, otherwise the kernel may stuck here. And actually set_termios() adds transmission completion waiting to avoid data loss or data breakage when changing the baud rate, but we don't need to worry about this when queuing break characters. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230223093941.31790-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytesAlex Hung1-1/+4
[ Upstream commit 031f196d1b1b6d5dfcb0533b431e3ab1750e6189 ] [WHY] When PTEBufferSizeInRequests is zero, UBSAN reports the following warning because dml_log2 returns an unexpected negative value: shift exponent 4294966273 is too large for 32-bit type 'int' [HOW] In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and assign the result directly. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/amdkfd: Fix an illegal memory accessQu Huang1-6/+3
[ Upstream commit 4fc8fff378b2f2039f2a666d9f8c570f4e58352c ] In the kfd_wait_on_events() function, the kfd_event_waiter structure is allocated by alloc_event_waiters(), but the event field of the waiter structure is not initialized; When copy_from_user() fails in the kfd_wait_on_events() function, it will enter exception handling to release the previously allocated memory of the waiter structure; Due to the event field of the waiters structure being accessed in the free_waiters() function, this results in illegal memory access and system crash, here is the crash log: localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0 localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082 localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000 localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0 localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64 localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002 localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698 localhost kernel: FS: 0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000 localhost kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0 localhost kernel: Call Trace: localhost kernel: _raw_spin_lock_irqsave+0x30/0x40 localhost kernel: remove_wait_queue+0x12/0x50 localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu] localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu] localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: __x64_sys_ioctl+0x8e/0xd0 localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0 localhost kernel: do_syscall_64+0x33/0x80 localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 localhost kernel: RIP: 0033:0x152a4dff68d7 Allocate the structure with kcalloc, and remove redundant 0-initialization and a redundant loop condition check. Signed-off-by: Qu Huang <qu.huang@linux.dev> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22mmc: atmel-mci: fix race between stop command and start of next commandTobias Schramm1-3/+0
[ Upstream commit eca5bd666b0aa7dc0bca63292e4778968241134e ] This commit fixes a race between completion of stop command and start of a new command. Previously the command ready interrupt was enabled before stop command was written to the command register. This caused the command ready interrupt to fire immediately since the CMDRDY flag is asserted constantly while there is no command in progress. Consequently the command state machine will immediately advance to the next state when the tasklet function is executed again, no matter actual completion state of the stop command. Thus a new command can then be dispatched immediately, interrupting and corrupting the stop command on the CMD line. Fix that by dropping the command ready interrupt enable before calling atmci_send_stop_cmd. atmci_send_stop_cmd does already enable the command ready interrupt, no further writes to ATMCI_IER are necessary. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20221230194315.809903-2-t.schramm@manjaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22media: m5mols: fix off-by-one loop termination errorLinus Torvalds1-1/+1
[ Upstream commit efbcbb12ee99f750c9f25c873b55ad774871de2a ] The __find_restype() function loops over the m5mols_default_ffmt[] array, and the termination condition ends up being wrong: instead of stopping when the iterator becomes the size of the array it traverses, it stops after it has already overshot the array. Now, in practice this doesn't likely matter, because the code will always find the entry it looks for, and will thus return early and never hit that last extra iteration. But it turns out that clang will unroll the loop fully, because it has only two iterations (well, three due to the off-by-one bug), and then clang will end up just giving up in the middle of the loop unrolling when it notices that the code walks past the end of the array. And that made 'objtool' very unhappy indeed, because the generated code just falls off the edge of the universe, and ends up falling through to the next function, causing this warning: drivers/media/i2c/m5mols/m5mols.o: warning: objtool: m5mols_set_fmt() falls through to next function m5mols_get_frame_desc() Fix the loop ending condition. Reported-by: Jens Axboe <axboe@kernel.dk> Analyzed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Analyzed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/linux-block/CAHk-=wgTSdKYbmB1JYM5vmHMcD9J9UZr0mn7BOYM_LudrP+Xvw@mail.gmail.com/ Fixes: bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP") Cc: HeungJun, Kim <riverful.kim@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (adm1266) Set `can_sleep` flag for GPIO chipLars-Peter Clausen1-0/+1
[ Upstream commit a5bb73b3f5db1a4e91402ad132b59b13d2651ed9 ] The adm1266 driver uses I2C bus access in its GPIO chip `set` and `get` implementation. This means these functions can sleep and the GPIO chip should set the `can_sleep` property to true. This will ensure that a warning is printed when trying to set or get the GPIO value from a context that potentially can't sleep. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230314093146.2443845-1-lars@metafoo.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: tmp512: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
[ Upstream commit 00d85e81796b17a29a0e096c5a4735daa47adef8 ] The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/hwmon/tmp513.c:610:34: error: ‘tmp51x_of_match’ defined but not used [-Werror=unused-const-variable=] Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312193723.478032-2-krzysztof.kozlowski@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (ucd90320) Add minimum delay between bus accessesLars-Peter Clausen1-0/+75
[ Upstream commit 8d655e65237643c48ada2c131b83679bf1105373 ] When probing the ucd90320 access to some of the registers randomly fails. Sometimes it NACKs a transfer, sometimes it returns just random data and the PEC check fails. Experimentation shows that this seems to be triggered by a register access directly back to back with a previous register write. Experimentation also shows that inserting a small delay after register writes makes the issue go away. Use a similar solution to what the max15301 driver does to solve the same problem. Create a custom set of bus read and write functions that make sure that the delay is added. Fixes: a470f11c5ba2 ("hwmon: (pmbus/ucd9000) Add support for UCD90320 Power Sequencer") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230312160312.2227405-1-lars@metafoo.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (ina3221) return prober error codeMarcus Folkesson1-1/+1
[ Upstream commit c93f5e2ab53243b17febabb9422a697017d3d49a ] ret is set to 0 which do not indicate an error. Return -EINVAL instead. Fixes: a9e9dd9c6de5 ("hwmon: (ina3221) Read channel input source info from DT") Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20230310075035.246083-1-marcus.folkesson@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race ↵Zheng Wang1-0/+1
condition [ Upstream commit cb090e64cf25602b9adaf32d5dfc9c8bec493cd1 ] In xgene_hwmon_probe, &ctx->workq is bound with xgene_hwmon_evt_work. Then it will be started. If we remove the driver which will call xgene_hwmon_remove to clean up, there may be unfinished work. The possible sequence is as follows: Fix it by finishing the work before cleanup in xgene_hwmon_remove. CPU0 CPU1 |xgene_hwmon_evt_work xgene_hwmon_remove | kfifo_free(&ctx->async_msg_fifo);| | |kfifo_out_spinlocked |//use &ctx->async_msg_fifo Fixes: 2ca492e22cb7 ("hwmon: (xgene) Fix crash when alarm occurs before driver probe") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Link: https://lore.kernel.org/r/20230310084007.1403388-1-zyytlz.wz@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (adt7475) Fix masking of hysteresis registersTony O'Brien1-2/+2
[ Upstream commit 48e8186870d9d0902e712d601ccb7098cb220688 ] The wrong bits are masked in the hysteresis register; indices 0 and 2 should zero bits [7:4] and preserve bits [3:0], and index 1 should zero bits [3:0] and preserve bits [7:4]. Fixes: 1c301fc5394f ("hwmon: Add a driver for the ADT7475 hardware monitoring chip") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230222005228.158661-3-tony.obrien@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (adt7475) Display smoothing attributes in correct orderTony O'Brien1-2/+2
[ Upstream commit 5f8d1e3b6f9b5971f9c06d5846ce00c49e3a8d94 ] Throughout the ADT7475 driver, attributes relating to the temperature sensors are displayed in the order Remote 1, Local, Remote 2. Make temp_st_show() conform to this expectation so that values set by temp_st_store() can be displayed using the correct attribute. Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230222005228.158661-2-tony.obrien@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22ethernet: sun: add check for the mdesc_grab()Liang He2-0/+6
[ Upstream commit 90de546d9a0b3c771667af18bb3f80567eabb89b ] In vnet_port_probe() and vsw_port_probe(), we should check the return value of mdesc_grab() as it may return NULL which can caused NPD bugs. Fixes: 5d01fa0c6bd8 ("ldmvsw: Add ldmvsw.c driver code") Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22qed/qed_mng_tlv: correctly zero out ->min instead of ->hourDaniil Tatianin1-1/+1
[ Upstream commit 470efd68a4653d9819d391489886432cd31bcd0b ] This fixes an issue where ->hour would erroneously get zeroed out instead of ->min because of a bad copy paste. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: f240b6882211 ("qed: Add support for processing fcoe tlv request.") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Link: https://lore.kernel.org/r/20230315194618.579286-1-d-tatianin@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22net: usb: smsc75xx: Move packet length check to prevent kernel panic in skb_pullSzymon Heidrich1-2/+8
[ Upstream commit 43ffe6caccc7a1bb9d7442fbab521efbf6c1378c ] Packet length check needs to be located after size and align_count calculation to prevent kernel panic in skb_pull() in case rx_cmd_a & RX_CMD_A_RED evaluates to true. Fixes: d8b228318935 ("net: usb: smsc75xx: Limit packet length to skb->len") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20230316110540.77531-1-szymon.heidrich@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22net: dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290Vladimir Oltean1-4/+12
[ Upstream commit 7e9517375a14f44ee830ca1c3278076dd65fcc8f ] There are 3 classes of switch families that the driver is aware of, as far as mv88e6xxx_change_mtu() is concerned: - MTU configuration is available per port. Here, the chip->info->ops->port_set_jumbo_size() method will be present. - MTU configuration is global to the switch. Here, the chip->info->ops->set_max_frame_size() method will be present. - We don't know how to change the MTU. Here, none of the above methods will be present. Switch families MV88E6165, MV88E6191, MV88E6220, MV88E6250 and MV88E6290 fall in category 3. The blamed commit has adjusted the MTU for all 3 categories by EDSA_HLEN (8 bytes), resulting in a new maximum MTU of 1492 being reported by the driver for these switches. I don't have the hardware to test, but I do have a MV88E6390 switch on which I can simulate this by commenting out its .port_set_jumbo_size definition from mv88e6390_ops. The result is this set of messages at probe time: mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 1 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 2 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 3 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 4 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 5 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 6 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 7 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 8 It is highly implausible that there exist Ethernet switches which don't support the standard MTU of 1500 octets, and this is what the DSA framework says as well - the error comes from dsa_slave_create() -> dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN). But the error messages are alarming, and it would be good to suppress them. As a consequence of this unlikeliness, we reimplement mv88e6xxx_get_max_mtu() and mv88e6xxx_change_mtu() on switches from the 3rd category as follows: the maximum supported MTU is 1500, and any request to set the MTU to a value larger than that fails in dev_validate_mtu(). Fixes: b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22ice: xsk: disable txq irq before flushing hwMaciej Fijalkowski1-2/+2
[ Upstream commit b830c9642386867863ac64295185f896ff2928ac ] ice_qp_dis() intends to stop a given queue pair that is a target of xsk pool attach/detach. One of the steps is to disable interrupts on these queues. It currently is broken in a way that txq irq is turned off *after* HW flush which in turn takes no effect. ice_qp_dis(): -> ice_qvec_dis_irq() --> disable rxq irq --> flush hw -> ice_vsi_stop_tx_ring() -->disable txq irq Below splat can be triggered by following steps: - start xdpsock WITHOUT loading xdp prog - run xdp_rxq_info with XDP_TX action on this interface - start traffic - terminate xdpsock [ 256.312485] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 256.319560] #PF: supervisor read access in kernel mode [ 256.324775] #PF: error_code(0x0000) - not-present page [ 256.329994] PGD 0 P4D 0 [ 256.332574] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 256.337006] CPU: 3 PID: 32 Comm: ksoftirqd/3 Tainted: G OE 6.2.0-rc5+ #51 [ 256.345218] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 256.355807] RIP: 0010:ice_clean_rx_irq_zc+0x9c/0x7d0 [ice] [ 256.361423] Code: b7 8f 8a 00 00 00 66 39 ca 0f 84 f1 04 00 00 49 8b 47 40 4c 8b 24 d0 41 0f b7 45 04 66 25 ff 3f 66 89 04 24 0f 84 85 02 00 00 <49> 8b 44 24 18 0f b7 14 24 48 05 00 01 00 00 49 89 04 24 49 89 44 [ 256.380463] RSP: 0018:ffffc900088bfd20 EFLAGS: 00010206 [ 256.385765] RAX: 000000000000003c RBX: 0000000000000035 RCX: 000000000000067f [ 256.393012] RDX: 0000000000000775 RSI: 0000000000000000 RDI: ffff8881deb3ac80 [ 256.400256] RBP: 000000000000003c R08: ffff889847982710 R09: 0000000000010000 [ 256.407500] R10: ffffffff82c060c0 R11: 0000000000000004 R12: 0000000000000000 [ 256.414746] R13: ffff88811165eea0 R14: ffffc9000d255000 R15: ffff888119b37600 [ 256.421990] FS: 0000000000000000(0000) GS:ffff8897e0cc0000(0000) knlGS:0000000000000000 [ 256.430207] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 256.436036] CR2: 0000000000000018 CR3: 0000000005c0a006 CR4: 00000000007706e0 [ 256.443283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 256.450527] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 256.457770] PKRU: 55555554 [ 256.460529] Call Trace: [ 256.463015] <TASK> [ 256.465157] ? ice_xmit_zc+0x6e/0x150 [ice] [ 256.469437] ice_napi_poll+0x46d/0x680 [ice] [ 256.473815] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 256.478863] __napi_poll+0x29/0x160 [ 256.482409] net_rx_action+0x136/0x260 [ 256.486222] __do_softirq+0xe8/0x2e5 [ 256.489853] ? smpboot_thread_fn+0x2c/0x270 [ 256.494108] run_ksoftirqd+0x2a/0x50 [ 256.497747] smpboot_thread_fn+0x1c1/0x270 [ 256.501907] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 256.506594] kthread+0xea/0x120 [ 256.509785] ? __pfx_kthread+0x10/0x10 [ 256.513597] ret_from_fork+0x29/0x50 [ 256.517238] </TASK> In fact, irqs were not disabled and napi managed to be scheduled and run while xsk_pool pointer was still valid, but SW ring of xdp_buff pointers was already freed. To fix this, call ice_qvec_dis_irq() after ice_vsi_stop_tx_ring(). Also while at it, remove redundant ice_clean_rx_ring() call - this is handled in ice_qp_clean_rings(). Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22block: sunvdc: add check for mdesc_grab() returning NULLLiang He1-0/+2
[ Upstream commit 6030363199e3a6341afb467ddddbed56640cbf6a ] In vdc_port_probe(), we should check the return value of mdesc_grab() as it may return NULL, which can cause potential NPD bug. Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com [axboe: style cleanup] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22nvmet: avoid potential UAF in nvmet_req_complete()Damien Le Moal1-1/+3
[ Upstream commit 6173a77b7e9d3e202bdb9897b23f2a8afe7bf286 ] An nvme target ->queue_response() operation implementation may free the request passed as argument. Such implementation potentially could result in a use after free of the request pointer when percpu_ref_put() is called in nvmet_req_complete(). Avoid such problem by using a local variable to save the sq pointer before calling __nvmet_req_complete(), thus avoiding dereferencing the req pointer after that function call. Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22nvme: fix handling single range discard requestMing Lei1-9/+19
[ Upstream commit 37f0dc2ec78af0c3f35dd05578763de059f6fe77 ] When investigating one customer report on warning in nvme_setup_discard, we observed the controller(nvme/tcp) actually exposes queue_max_discard_segments(req->q) == 1. Obviously the current code can't handle this situation, since contiguity merge like normal RW request is taken. Fix the issue by building range from request sector/nr_sectors directly. Fixes: b35ba01ea697 ("nvme: support ranged discard requests") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22block: null_blk: Fix handling of fake timeout requestDamien Le Moal1-3/+3
[ Upstream commit 63f886597085f346276e3b3c8974de0100d65f32 ] When injecting a fake timeout into the null_blk driver using fail_io_timeout, the request timeout handler does not execute blk_mq_complete_request(), so the complete callback is never executed for a timedout request. The null_blk driver also has a driver-specific fake timeout mechanism which does not have this problem. Fix the problem with fail_io_timeout by using the same meachanism as null_blk internal timeout feature, using the fake_timeout field of null_blk commands. Reported-by: Akinobu Mita <akinobu.mita@gmail.com> Fixes: de3510e52b0a ("null_blk: fix command timeout completion handling") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-07 00:43:57 +0300