summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-03-09r8169: fix resuming from suspend on RTL8105e if machine runs on batteryHeiner Kallweit1-0/+2
commit d2a04370817fc7b0172dad2ef2decf907e1a304e upstream. Armin reported that after referenced commit his RTL8105e is dead when resuming from suspend and machine runs on battery. This patch has been confirmed to fix the issue. Fixes: e80bd76fbf56 ("r8169: work around power-saving bug on some chip versions") Reported-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09of: unittest: Fix build on architectures without CONFIG_OF_ADDRESSCatalin Marinas1-0/+3
commit aed5041ef9a3f594ed9dc0bb5ee7e1bbccfd3366 upstream. of_dma_get_max_cpu_address() is not defined if !CONFIG_OF_ADDRESS, so return early in of_unittest_dma_get_max_cpu_address(). Fixes: 07d13a1d6120 ("of: unittest: Add test for of_dma_get_max_cpu_address()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09iommu/vt-d: Fix status code for Allocate/Free PASID commandZenghui Yu1-2/+2
[ Upstream commit 444d66a23c1f1e4c4d12aed4812681d0ad835d60 ] As per Intel vt-d spec, Rev 3.0 (section 10.4.45 "Virtual Command Response Register"), the status code of "No PASID available" error in response to the Allocate PASID command is 2, not 1. The same for "Invalid PASID" error in response to the Free PASID command. We will otherwise see confusing kernel log under the command failure from guest side. Fix it. Fixes: 24f27d32ab6b ("iommu/vt-d: Enlightened PASID allocation") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210227073909.432-1-yuzenghui@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-09rsxx: Return -EFAULT if copy_to_user() failsDan Carpenter1-3/+5
[ Upstream commit 77516d25f54912a7baedeeac1b1b828b6f285152 ] The copy_to_user() function returns the number of bytes remaining but we want to return -EFAULT to the user if it can't complete the copy. The "st" variable only holds zero on success or negative error codes on failure so the type should be int. Fixes: 36f988e978f8 ("rsxx: Adding in debugfs entries.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-09IB/mlx5: Add missing error codeYueHaibing1-1/+3
[ Upstream commit 3a9b3d4536e0c25bd3906a28c1f584177e49dd0f ] Set err to -ENOMEM if kzalloc fails instead of 0. Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX") Link: https://lore.kernel.org/r/20210222122343.19720-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-09RDMA/rxe: Fix missing kconfig dependency on CRYPTOJulian Braha1-0/+1
[ Upstream commit 475f23b8c66d2892ad6acbf90ed757cafab13de7 ] When RDMA_RXE is enabled and CRYPTO is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for CRYPTO_CRC32 Depends on [n]: CRYPTO [=n] Selected by [y]: - RDMA_RXE [=y] && (INFINIBAND_USER_ACCESS [=y] || !INFINIBAND_USER_ACCESS [=y]) && INET [=y] && PCI [=y] && INFINIBAND [=y] && INFINIBAND_VIRT_DMA [=y] This is because RDMA_RXE selects CRYPTO_CRC32, without depending on or selecting CRYPTO, despite that config option being subordinate to CRYPTO. Fixes: cee2688e3cd6 ("IB/rxe: Offload CRC calculation when possible") Signed-off-by: Julian Braha <julianbraha@gmail.com> Link: https://lore.kernel.org/r/21525878.NYvzQUHefP@ubuntu-mate-laptop Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-09RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_repSaeed Mahameed1-2/+3
[ Upstream commit 221384df6123747d2a75517dd06cc01752f81518 ] ib_send_cm_sidr_rep() { spin_lock_irqsave() cm_send_sidr_rep_locked() { ... spin_lock_irq() .... spin_unlock_irq() <--- this will enable interrupts } spin_unlock_irqrestore() } spin_unlock_irqrestore() expects interrupts to be disabled but the internal spin_unlock_irq() will always enable hard interrupts. Fix this by replacing the internal spin_{lock,unlock}_irq() with irqsave/restore variants. It fixes the following kernel trace: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 2 PID: 20001 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x1d/0x20 Call Trace: _raw_spin_unlock_irqrestore+0x4e/0x50 ib_send_cm_sidr_rep+0x3a/0x50 [ib_cm] cma_send_sidr_rep+0xa1/0x160 [rdma_cm] rdma_accept+0x25e/0x350 [rdma_cm] ucma_accept+0x132/0x1cc [rdma_ucm] ucma_write+0xbf/0x140 [rdma_ucm] vfs_write+0xc1/0x340 ksys_write+0xb3/0xe0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 87c4c774cbef ("RDMA/cm: Protect access to remote_sidr_table") Link: https://lore.kernel.org/r/20210301081844.445823-1-leon@kernel.org Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-09arm64: mm: Set ZONE_DMA size based on early IORT scanArd Biesheuvel1-0/+55
commit 2b8652936f0ca9ca2e6c984ae76c7bfcda1b3f22 upstream We recently introduced a 1 GB sized ZONE_DMA to cater for platforms incorporating masters that can address less than 32 bits of DMA, in particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has peripherals that can only address up to 1 GB (and its PCIe host bridge can only access the bottom 3 GB) Instructing the DMA layer about these limitations is straight-forward, even though we had to fix some issues regarding memory limits set in the IORT for named components, and regarding the handling of ACPI _DMA methods. However, the DMA layer also needs to be able to allocate memory that is guaranteed to meet those DMA constraints, for bounce buffering as well as allocating the backing for consistent mappings. This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately, it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes problems with kdump, and potentially in other places where allocations cannot cross zone boundaries. Therefore, we should avoid having two separate DMA zones when possible. So let's do an early scan of the IORT, and only create the ZONE_DMA if we encounter any devices that need it. This puts the burden on the firmware to describe such limitations in the IORT, which may be redundant (and less precise) if _DMA methods are also being provided. However, it should be noted that this situation is highly unusual for arm64 ACPI machines. Also, the DMA subsystem still gives precedence to the _DMA method if implemented, and so we will not lose the ability to perform streaming DMA outside the ZONE_DMA if the _DMA method permits it. [nsaenz: unified implementation with DT's counterpart] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09of: unittest: Add test for of_dma_get_max_cpu_address()Nicolas Saenz Julienne1-0/+18
commit 07d13a1d6120d453c3c1f020578693d072deded5 upstream Introduce a test for of_dma_get_max_cup_address(), it uses the same DT data as the rest of dma-ranges unit tests. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201119175400.9995-5-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09of/address: Introduce of_dma_get_max_cpu_address()Nicolas Saenz Julienne1-0/+42
commit 964db79d6c186cc2ecc6ae46f98eed7e0ea8cf71 upstream Introduce of_dma_get_max_cpu_address(), which provides the highest CPU physical address addressable by all DMA masters in the system. It's specially useful for setting memory zones sizes at early boot time. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201119175400.9995-4-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09drm/amdgpu: fix parameter error of RREG32_PCIE() in amdgpu_regs_pcieKevin Wang1-2/+2
commit 1aa46901ee51c1c5779b3b239ea0374a50c6d9ff upstream. the register offset isn't needed division by 4 to pass RREG32_PCIE() Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09drm/amdgpu:disable VCN for Navi12 SKUAsher.Song1-2/+4
commit 0c61ac8134ffc851681ce5d4bd60d97c3d5aed27 upstream. Navi12 0x7360/C7 SKU has no video support, so remove it. Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Asher.Song <Asher.Song@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09dm verity: fix FEC for RS roots unaligned to block sizeMilan Broz1-11/+12
commit df7b59ba9245c4a3115ebaa905e3e5719a3810da upstream. Optional Forward Error Correction (FEC) code in dm-verity uses Reed-Solomon code and should support roots from 2 to 24. The error correction parity bytes (of roots lengths per RS block) are stored on a separate device in sequence without any padding. Currently, to access FEC device, the dm-verity-fec code uses dm-bufio client with block size set to verity data block (usually 4096 or 512 bytes). Because this block size is not divisible by some (most!) of the roots supported lengths, data repair cannot work for partially stored parity bytes. This fix changes FEC device dm-bufio block size to "roots << SECTOR_SHIFT" where we can be sure that the full parity data is always available. (There cannot be partial FEC blocks because parity must cover whole sectors.) Because the optional FEC starting offset could be unaligned to this new block size, we have to use dm_bufio_set_sector_offset() to configure it. The problem is easily reproduced using veritysetup, e.g. for roots=13: # create verity device with RS FEC dd if=/dev/urandom of=data.img bs=4096 count=8 status=none veritysetup format data.img hash.img --fec-device=fec.img --fec-roots=13 | awk '/^Root hash/{ print $3 }' >roothash # create an erasure that should be always repairable with this roots setting dd if=/dev/zero of=data.img conv=notrunc bs=1 count=8 seek=4088 status=none # try to read it through dm-verity veritysetup open data.img test hash.img --fec-device=fec.img --fec-roots=13 $(cat roothash) dd if=/dev/mapper/test of=/dev/null bs=4096 status=noxfer # wait for possible recursive recovery in kernel udevadm settle veritysetup close test With this fix, errors are properly repaired. device-mapper: verity-fec: 7:1: FEC 0: corrected 8 errors ... Without it, FEC code usually ends on unrecoverable failure in RS decoder: device-mapper: verity-fec: 7:1: FEC 0: failed to correct: -74 ... This problem is present in all kernels since the FEC code's introduction (kernel 4.5). It is thought that this problem is not visible in Android ecosystem because it always uses a default RS roots=2. Depends-on: a14e5ec66a7a ("dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size") Signed-off-by: Milan Broz <gmazyland@gmail.com> Tested-by: Jérôme Carretero <cJ-ko@zougloub.eu> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Cc: stable@vger.kernel.org # 4.5+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09dm bufio: subtract the number of initial sectors in dm_bufio_get_device_sizeMikulas Patocka1-0/+4
commit a14e5ec66a7a66e57b24e2469f9212a78460207e upstream. dm_bufio_get_device_size returns the device size in blocks. Before returning the value, we must subtract the nubmer of starting sectors. The number of starting sectors may not be divisible by block size. Note that currently, no target is using dm_bufio_set_sector_offset and dm_bufio_get_device_size simultaneously, so this change has no effect. However, an upcoming dm-verity-fec fix needs this change. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09PM: runtime: Update device status before letting suppliers suspendRafael J. Wysocki1-25/+37
commit 44cc89f764646b2f1f2ea5d1a08b230131707851 upstream. Because the PM-runtime status of the device is not updated in __rpm_callback(), attempts to suspend the suppliers of the given device triggered by rpm_put_suppliers() called by it may fail. Fix this by making __rpm_callback() update the device's status to RPM_SUSPENDED before calling rpm_put_suppliers() if the current status of the device is RPM_SUSPENDING and the callback just invoked by it has returned 0 (success). While at it, modify the code in __rpm_callback() to always check the device's PM-runtime status under its PM lock. Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/ Fixes: 21d5c57b3726 ("PM / runtime: Use device links") Reported-by: Elaine Zhang <zhangqing@rock-chips.com> Diagnosed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Elaine Zhang <zhangiqng@rock-chips.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09tpm, tpm_tis: Decorate tpm_get_timeouts() with request_locality()Jarkko Sakkinen1-2/+12
commit a5665ec2affdba21bff3b0d4d3aed83b3951e8ff upstream. This is shown with Samsung Chromebook Pro (Caroline) with TPM 1.2 (SLB 9670): [ 4.324298] TPM returned invalid status [ 4.324806] WARNING: CPU: 2 PID: 1 at drivers/char/tpm/tpm_tis_core.c:275 tpm_tis_status+0x86/0x8f Background ========== TCG PC Client Platform TPM Profile (PTP) Specification, paragraph 6.1 FIFO Interface Locality Usage per Register, Table 39 Register Behavior Based on Locality Setting for FIFO - a read attempt to TPM_STS_x Registers returns 0xFF in case of lack of locality. The fix ======= Decorate tpm_get_timeouts() with request_locality() and release_locality(). Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Laurent Bigonville <bigon@debian.org> Cc: stable@vger.kernel.org Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09tpm, tpm_tis: Decorate tpm_tis_gen_interrupt() with request_locality()Lukasz Majczak1-3/+13
commit d53a6adfb553969809eb2b736a976ebb5146cd95 upstream. This is shown with Samsung Chromebook Pro (Caroline) with TPM 1.2 (SLB 9670): [ 4.324298] TPM returned invalid status [ 4.324806] WARNING: CPU: 2 PID: 1 at drivers/char/tpm/tpm_tis_core.c:275 tpm_tis_status+0x86/0x8f Background ========== TCG PC Client Platform TPM Profile (PTP) Specification, paragraph 6.1 FIFO Interface Locality Usage per Register, Table 39 Register Behavior Based on Locality Setting for FIFO - a read attempt to TPM_STS_x Registers returns 0xFF in case of lack of locality. The fix ======= Decorate tpm_tis_gen_interrupt() with request_locality() and release_locality(). Cc: Laurent Bigonville <bigon@debian.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Signed-off-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07net: sfp: add workaround for Realtek RTL8672 and RTL9601C chipsPali Rohár1-33/+67
[ Upstream commit 426c6cbc409cbda9ab1a9dbf15d3c2ef947eb8c1 ] The workaround for VSOL V2801F brand based GPON SFP modules added in commit 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") works only for IDs added explicitly to the list. Since there are rebranded modules where OEM vendors put different strings into the vendor name field, we cannot base workaround on IDs only. Moreover the issue which the above mentioned commit tried to work around is generic not only to VSOL based modules, but rather to all GPON modules based on Realtek RTL8672 and RTL9601C chips. These include at least the following GPON modules: * V-SOL V2801F * C-Data FD511GX-RM0 * OPTON GP801R * BAUDCOM BD-1234-SFM * CPGOS03-0490 v2.0 * Ubiquiti U-Fiber Instant * EXOT EGS1 These Realtek chips have broken EEPROM emulator which for N-byte read operation returns just the first byte of EEPROM data, followed by N-1 zeros. Introduce a new function, sfp_id_needs_byte_io(), which detects SFP modules with broken EEPROM emulator based on N-1 zeros and switch to 1 byte EEPROM reading operation. Function sfp_i2c_read() now always uses single byte reading when it is required and when function sfp_hwmon_probe() detects single byte access, it disables registration of hwmon device, because in this case we cannot reliably and atomically read 2 bytes as is required by the standard for retrieving values from diagnostic area. (These Realtek chips are broken in a way that violates SFP standards for diagnostic interface. Kernel in this case simply cannot do anything less of skipping registration of the hwmon interface.) This patch fixes reading of EEPROM content from SFP modules based on Realtek RTL8672 and RTL9601C chips. Diagnostic interface of EEPROM stays broken and cannot be fixed. Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") Co-developed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaroundRussell King1-5/+58
[ Upstream commit 0d035bed2a4a6c4878518749348be61bf082d12a ] Add a workaround for the detection of VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 GPON module which CarlitoxxPro states needs single byte I2C reads to the EEPROM. Pali Rohár reports that he also has a CarlitoxxPro-based V2801F module, which reports a manufacturer of "OEM". This manufacturer can't be matched as it appears in many different modules, so also match the part number too. Reported-by: Thomas Schreiber <tschreibe@gmail.com> Reported-by: Pali Rohár <pali@kernel.org> Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07media: v4l: ioctl: Fix memory leak in video_usercopySakari Ailus1-12/+7
commit fb18802a338b36f675a388fc03d2aa504a0d0899 upstream. When an IOCTL with argument size larger than 128 that also used array arguments were handled, two memory allocations were made but alas, only the latter one of them was released. This happened because there was only a single local variable to hold such a temporary allocation. Fix this by adding separate variables to hold the pointers to the temporary allocations. Reported-by: Arnd Bergmann <arnd@kernel.org> Reported-by: syzbot+1115e79c8df6472c612b@syzkaller.appspotmail.com Fixes: d14e6d76ebf7 ("[media] v4l: Add multi-planar ioctl handling code") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07tty: teach the n_tty ICANON case about the new "cookie continuations" tooLinus Torvalds1-7/+19
commit d7fe75cbc23c7d225eee2ef04def239b6603dce7 upstream. The ICANON case is a bit messy, since it has to look for the line ending, and has special code to then suppress line ending characters if they match the __DISABLED_CHAR. So it actually looks up the line ending even past the point where it knows it won't copy it to the result buffer. That said, apart from all those odd legacy N_TTY ICANON cases, the actual "should we continue copying" logic isn't really all that complicated or different from the non-canon case. In fact, the lack of "wait for at least N characters" arguably makes the repeat case slightly simpler. It really just boils down to "there's more of the line to be copied". So add the necessarily trivial logic, and now the N_TTY case will give long result lines even when in canon mode. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07tty: teach n_tty line discipline about the new "cookie continuations"Linus Torvalds1-10/+42
commit 15ea8ae8e03fdb845ed3ff5d9f11dd5f4f60252c upstream. With the conversion to do the tty ldisc read operations in small chunks, the n_tty line discipline became noticeably slower for throughput oriented loads, because rather than read things in up to 2kB chunks, it would return at most 64 bytes per read() system call. The cost is mainly all in the "do system calls over and over", not really in the new "copy to an extra kernel buffer". This can be fixed by teaching the n_tty line discipline about the "cookie continuation" model, which the chunking code supports because things like hdlc need to be able to handle packets up to 64kB in size. Doing that doesn't just get us back to the old performace, but to much better performance: my stupid "copy 10MB of data over a pty" test program is now almost twice as fast as it used to be (going down from 0.1s to 0.054s). This is entirely because it now creates maximal chunks (which happens to be "one byte less than one page" due to how we do the circular tty buffers). NOTE! This case only handles the simpler non-icanon case, which is the one where people may care about throughput. I'm going to do the icanon case later too, because while performance isn't a major issue for that, there may be programs that think they'll always get a full line and don't like the 64-byte chunking for that reason. Such programs are arguably buggy (signals etc can cause random partial results from tty reads anyway), and good programs will handle such partial reads, but expecting everybody to write "good programs" has never been a winning policy for the kernel.. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07tty: clean up legacy leftovers from n_tty line disciplineLinus Torvalds1-20/+9
commit 64a69892afadd6fffaeadc65427bb7601161139d upstream. Back when the line disciplines did their own direct user accesses, they had to deal with the data copy possibly failing in the middle. Now that the user copy is done by the tty_io.c code, that failure case no longer exists. Remove the left-over error handling code that cannot trigger. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07tty: fix up hung_up_tty_read() conversionLinus Torvalds1-4/+5
commit ddc5fda7456178e2cbc87675b370920d98360daf upstream. In commit "tty: implement read_iter", I left the read_iter conversion of the hung up tty case alone, because I incorrectly thought it didn't matter. Jiri showed me the errors of my ways, and pointed out the problems with that incomplete conversion. Fix it all up. Reported-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07tty: fix up iterate_tty_read() EOVERFLOW handlingLinus Torvalds1-6/+13
commit e71a8d5cf4b4f274740e31b601216071e2a11afa upstream. When I converted the tty_ldisc_ops 'read()' function to take a kernel pointer, I was a bit too aggressive about the ldisc returning EOVERFLOW. Yes, we want to have EOVERFLOW override any partially read data (because the whole point is that the buffer was too small for the whole packet, and we don't want to see partial packets), but it shouldn't override a previous EFAULT. And in fact, it really is just EOVERFLOW that is special and should throw away any partially read data, not "any error". Admittedly EOVERFLOW is currently the only one that can happen for a continuation read - and if the first read iteration returns an error we won't have this issue. So this is more of a technicality, but let's just make the intent very explicit, and re-organize the error handling a bit so that this is all clearer. Reported-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07remoteproc/mediatek: Fix kernel test robot warningSouptick Joarder1-3/+1
commit cca21000261b2364991ecdb0d9e66b26ad9c4b4e upstream. Kernel test robot throws below warning -> >> drivers/remoteproc/mtk_scp.c:755:37: warning: unused variable >> 'mt8183_of_data' [-Wunused-const-variable] static const struct mtk_scp_of_data mt8183_of_data = { ^ >> drivers/remoteproc/mtk_scp.c:765:37: warning: unused variable >> 'mt8192_of_data' [-Wunused-const-variable] static const struct mtk_scp_of_data mt8192_of_data = { ^ As suggested by Bjorn, there's no harm in just dropping the of_match_ptr() wrapping of mtk_scp_of_match in the definition of mtk_scp_driver and we avoid this whole problem. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/1606513855-21130-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07zsmalloc: account the number of compacted pages correctlyRokudo Yan1-1/+1
commit 2395928158059b8f9858365fce7713ce7fef62e4 upstream. There exists multiple path may do zram compaction concurrently. 1. auto-compaction triggered during memory reclaim 2. userspace utils write zram<id>/compaction node So, multiple threads may call zs_shrinker_scan/zs_compact concurrently. But pages_compacted is a per zsmalloc pool variable and modification of the variable is not serialized(through under class->lock). There are two issues here: 1. the pages_compacted may not equal to total number of pages freed(due to concurrently add). 2. zs_shrinker_scan may not return the correct number of pages freed(issued by current shrinker). The fix is simple: 1. account the number of pages freed in zs_compact locally. 2. use actomic variable pages_compacted to accumulate total number. Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages") Signed-off-by: Rokudo Yan <wu-yan@tcl.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07xen-netback: respect gnttab_map_refs()'s return valueJan Beulich1-1/+11
commit 2991397d23ec597405b116d96de3813420bdcbc3 upstream. Commit 3194a1746e8a ("xen-netback: don't "handle" error by BUG()") dropped respective a BUG_ON() without noticing that with this the variable's value wouldn't be consumed anymore. With gnttab_set_map_op() setting all status fields to a non-zero value, in case of an error no slot should have a status of GNTST_okay (zero). This is part of XSA-367. Cc: <stable@vger.kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/d933f495-619a-0086-5fb4-1ec3cf81a8fc@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Verify lengths on passthrough PDUsChris Leech1-0/+9
commit f9dbdf97a5bd92b1a49cee3d591b55b11fd7a6d5 upstream. Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be verifying that the provided PDU header and data lengths fall within the netlink message to prevent accessing beyond that in memory. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Ensure sysfs attributes are limited to PAGE_SIZEChris Leech2-83/+90
commit ec98ea7070e94cc25a422ec97d1421e28d97b7ee upstream. As the iSCSI parameters are exported back through sysfs, it should be enforcing that they never are more than PAGE_SIZE (which should be more than enough) before accepting updates through netlink. Change all iSCSI sysfs attributes to use sysfs_emit(). Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Restrict sessions and handles to admin capabilitiesLee Duncan1-0/+6
commit 688e8128b7a92df982709a4137ea4588d16f24aa upstream. Protect the iSCSI transport handle, available in sysfs, by requiring CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting reception of messages to ones sent with CAP_SYS_ADMIN. This disables normal users from being able to end arbitrary iSCSI sessions. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Chris Leech <cleech@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07nvme-tcp: add clean action for failed reconnectionChao Leng1-2/+16
[ Upstream commit 70a99574a79f1cd4dc7ad56ea37be40844bfb97b ] If reconnect failed after start io queues, the queues will be unquiesced and new requests continue to be delivered. Reconnection error handling process directly free queues without cancel suspend requests. The suppend request will time out, and then crash due to use the queue after free. Add sync queues and cancel suppend requests for reconnection error handling. Signed-off-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07nvme-rdma: add clean action for failed reconnectionChao Leng1-2/+16
[ Upstream commit 958dc1d32c80566f58d18f05ef1f05bd32d172c1 ] A crash happens when inject failed reconnection. If reconnect failed after start io queues, the queues will be unquiesced and new requests continue to be delivered. Reconnection error handling process directly free queues without cancel suspend requests. The suppend request will time out, and then crash due to use the queue after free. Add sync queues and cancel suppend requests for reconnection error handling. Signed-off-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07nvme-core: add cancel tagset helpersChao Leng2-0/+22
[ Upstream commit 2547906982e2e6a0d42f8957f55af5bb51a7e55f ] Add nvme_cancel_tagset and nvme_cancel_admin_tagset for tear down and reconnection error handling. Signed-off-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07media: uvcvideo: Allow entities with no padsRicardo Ribalda1-2/+5
[ Upstream commit 7532dad6634031d083df7af606fac655b8d08b5c ] Avoid an underflow while calculating the number of inputs for entities with zero pads. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07drm/amd/amdgpu: add error handling to amdgpu_virt_read_pf2vf_dataJingwen Chen1-1/+5
[ Upstream commit 64dcf2f01d59cf9fad19b1a387bd39736a8f4d69 ] [Why] when vram lost happened in guest, try to write vram can lead to kernel stuck. [How] When the readback data is invalid, don't do write work, directly reschedule a new work. Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: Monk Liu<monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07drm/amd/display: Guard against NULL pointer deref when get_i2c_info failsNicholas Kazlauskas1-0/+5
[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ] [Why] If the BIOS table is invalid or corrupt then get_i2c_info can fail and we dereference a NULL pointer. [How] Check that ddc_pin is not NULL before using it and log an error if it is because this is unexpected. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07PCI: Add a REBAR size quirk for Sapphire RX 5600 XT PulseNirmoy Das1-1/+8
[ Upstream commit 907830b0fc9e374d00f3c83de5e426157b482c01 ] RX 5600 XT Pulse advertises support for BAR 0 being 256MB, 512MB, or 1GB, but it also supports 2GB, 4GB, and 8GB. Add a rebar size quirk so that the BAR 0 is big enough to cover complete VARM. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20210107175017.15893-5-nirmoy.das@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07drm/amdgpu: Add check to prevent IH overflowDefang Bo3-39/+71
[ Upstream commit e4180c4253f3f2da09047f5139959227f5cf1173 ] Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2"). When an ring buffer overflow happens the appropriate bit is set in the WPTR register which is also written back to memory. But clearing the bit in the WPTR doesn't trigger another memory writeback. So what can happen is that we end up processing the buffer overflow over and over again because the bit is never cleared. Resulting in a random system lockup because of an infinite loop in an interrupt handler. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Defang Bo <bodefang@126.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07drm/hisilicon: Fix use-after-freeTian Tao1-1/+0
[ Upstream commit c855af2f9c5c60760fd1bed7889a81bc37d2591d ] Fix the problem of dev being released twice. ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 75 PID: 15700 at lib/refcount.c:28 refcount_warn_saturate+0xd4/0x150 CPU: 75 PID: 15700 Comm: rmmod Tainted: G E 5.10.0-rc3+ #3 Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019 pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) pc : refcount_warn_saturate+0xd4/0x150 lr : refcount_warn_saturate+0xd4/0x150 sp : ffff2028150cbc00 x29: ffff2028150cbc00 x28: ffff2028150121c0 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000003 x23: 0000000000000000 x22: ffff2028150cbc90 x21: ffff2020038a30a8 x20: ffff2028150cbc90 x19: ffff0020cd938020 x18: 0000000000000010 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff x14: ffff2028950cb88f x13: ffff2028150cb89d x12: 0000000000000000 x11: 0000000005f5e0ff x10: ffff2028150cb800 x9 : 00000000ffffffd0 x8 : 75203b776f6c6672 x7 : ffff800011a6f7c8 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff202ffe2f9dc0 x1 : ffffa02fecf40000 x0 : 0000000000000026 Call trace: refcount_warn_saturate+0xd4/0x150 devm_drm_dev_init_release+0x50/0x70 devm_action_release+0x20/0x30 release_nodes+0x13c/0x218 devres_release_all+0x80/0x170 device_release_driver_internal+0x128/0x1f0 driver_detach+0x6c/0xe0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x60 pci_unregister_driver+0x24/0xd8 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm] __arm64_sys_delete_module+0x1fc/0x2d0 el0_svc_common.constprop.3+0xa8/0x188 do_el0_svc+0x80/0xa0 el0_sync_handler+0x8c/0xb0 el0_sync+0x15c/0x180 CPU: 75 PID: 15700 Comm: rmmod Tainted: G E 5.10.0-rc3+ #3 Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019 Call trace: dump_backtrace+0x0/0x208 show_stack+0x2c/0x40 dump_stack+0xd8/0x10c __warn+0xac/0x128 report_bug+0xcc/0x180 bug_handler+0x24/0x78 call_break_hook+0x80/0xa0 brk_handler+0x28/0x68 do_debug_exception+0x9c/0x148 el1_sync_handler+0x7c/0x128 el1_sync+0x80/0x100 refcount_warn_saturate+0xd4/0x150 devm_drm_dev_init_release+0x50/0x70 devm_action_release+0x20/0x30 release_nodes+0x13c/0x218 devres_release_all+0x80/0x170 device_release_driver_internal+0x128/0x1f0 driver_detach+0x6c/0xe0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x60 pci_unregister_driver+0x24/0xd8 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm] __arm64_sys_delete_module+0x1fc/0x2d0 el0_svc_common.constprop.3+0xa8/0x188 do_el0_svc+0x80/0xa0 el0_sync_handler+0x8c/0xb0 el0_sync+0x15c/0x180 ---[ end trace 00718630d6e5ff18 ]--- Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1607941973-32287-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tabletHans de Goede1-0/+18
[ Upstream commit a338c874d3d9d2463f031e89ae14942929b93db6 ] The Voyo winpad A15 tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: rcmfmac4330-sdio.To be filled by O.E.M.-To be filled by O.E.M..txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Voyo winpad A15 tablet. While preparing a matching linux-firmware update I noticed that the nvram is identical to the nvram used on the Prowise-PT301 tablet, so the new DMI quirk entry simply points to the already existing Prowise-PT301 nvram file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210129171413.139880-2-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07brcmfmac: Add DMI nvram filename quirk for Predia Basic tabletHans de Goede1-0/+14
[ Upstream commit af4b3a6f36d6c2fc5fca026bccf45e0fdcabddd9 ] The Predia Basic tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: brcmfmac43340-sdio.Insyde-CherryTrail.txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Predia Basic tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210129171413.139880-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()Juerg Haefliger3-7/+7
[ Upstream commit 4964a4300660d27907ceb655f219ac47e5941534 ] Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the following when loading snd-bcm2835: [ 58.480634] ------------[ cut here ]------------ [ 58.485321] kernel BUG at lib/string.c:1149! [ 58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd [ 58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G C OE 5.11.0-1001-raspi #1 [ 58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT) [ 58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 58.584178] pc : fortify_panic+0x20/0x24 [ 58.588161] lr : fortify_panic+0x20/0x24 [ 58.592136] sp : ffff800010a83990 [ 58.595491] x29: ffff800010a83990 x28: 0000000000000002 [ 58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000 [ 58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190 [ 58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000 [ 58.617042] x21: ffff39e884973014 x20: ffff39e88b793010 [ 58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030 [ 58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c [ 58.633200] x15: ffff39e88b901500 x14: 0720072007200720 [ 58.638588] x13: 0720072007200720 x12: 0720072007200720 [ 58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000 [ 58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000 [ 58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000 [ 58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948 [ 58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000 [ 58.670913] x1 : 0000000000000000 x0 : 0000000000000022 [ 58.676299] Call trace: [ 58.678775] fortify_panic+0x20/0x24 [ 58.682402] snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835] [ 58.688247] platform_probe+0x74/0xe4 [ 58.691963] really_probe+0xf0/0x510 [ 58.695585] driver_probe_device+0xe0/0x100 [ 58.699826] device_driver_attach+0xcc/0xd4 [ 58.704068] __driver_attach+0xb0/0x17c [ 58.707956] bus_for_each_dev+0x7c/0xd4 [ 58.711843] driver_attach+0x30/0x40 [ 58.715467] bus_add_driver+0x154/0x250 [ 58.719354] driver_register+0x84/0x140 [ 58.723242] __platform_driver_register+0x34/0x40 [ 58.728013] bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835] [ 58.734024] do_one_initcall+0x54/0x300 [ 58.737914] do_init_module+0x60/0x280 [ 58.741719] load_module+0x680/0x770 [ 58.745344] __do_sys_finit_module+0xbc/0x130 [ 58.749761] __arm64_sys_finit_module+0x2c/0x40 [ 58.754356] el0_svc_common.constprop.0+0x88/0x220 [ 58.759216] do_el0_svc+0x30/0xa0 [ 58.762575] el0_svc+0x28/0x70 [ 58.765669] el0_sync_handler+0x1a4/0x1b0 [ 58.769732] el0_sync+0x178/0x180 [ 58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000) [ 58.779275] ---[ end trace 29be5b17497bd898 ]--- [ 58.783955] note: insmod[1959] exited with preempt_count 1 [ 58.791921] ------------[ cut here ]------------ For the sake of it, replace all the other occurences of strcpy() under bcm2835-audio/ as well. Signed-off-by: Juerg Haefliger <juergh@canonical.com> Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07staging: most: sound: add sanity check for function argumentChristian Gromm1-0/+2
[ Upstream commit 45b754ae5b82949dca2b6e74fa680313cefdc813 ] This patch checks the function parameter 'bytes' before doing the subtraction to prevent memory corruption. Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber InstantPali Rohár2-2/+30
[ Upstream commit f0b4f847673299577c29b71d3f3acd3c313d81b7 ] The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information stored in its EEPROM. It claims to support all transceiver types including 10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is the only one supported. This module has also phys_id set to SFF, and the SFP subsystem currently does not allow to use SFP modules detected as SFFs. Add exception for this module so it can be detected as supported. This change finally allows to detect and use SFP GPON module Ubiquiti U-Fiber Instant on Linux system. EEPROM content of this SFP module is (where XX is serial number): 00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8 ???........??.?? 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20 ....UBNT 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41 .??)UF-INSTA 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36 NT 4 ??.6 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX .?..UBNTXXXXXXXX 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41 140123 `??A Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07ath10k: fix wmi mgmt tx queue full due to race conditionMiaoqing Pan1-11/+4
[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ] Failed to transmit wmi management frames: [84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full [84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28 [84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28 [84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28 This issue is caused by race condition between skb_dequeue and __skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a different lock: ar->data_lock vs list->lock, the result is no protection. So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt() running concurrently on different CPUs, there appear to be a rare corner cases when the queue length is 1, CPUx (skb_deuque) CPUy (__skb_queue_tail) next=list prev=list struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next); WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev); next = skb->next; WRITE_ONCE(next->prev, newsk); prev = skb->prev; WRITE_ONCE(prev->next, newsk); skb->next = skb->prev = NULL; list->qlen++; WRITE_ONCE(next->prev, prev); WRITE_ONCE(prev->next, next); If the instruction ‘next = skb->next’ is executed before ‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the old ‘next’ pointer, but the length is still added by one. The final result is the length of the queue will reach the maximum value but the queue is empty. So remove ar->data_lock, and use 'skb_queue_tail' instead of '__skb_queue_tail' to prevent the potential race condition. Also switch to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07mt76: mt7615: reset token when mac_reset happensRyder Lee3-12/+22
[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ] Reset token in mt7615_mac_reset_work() to avoid possible leakege. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtlClaire Chang1-0/+5
[ Upstream commit 7f9f2c3f7d99b8ae773459c74ac5e99a0dd46db9 ] Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk. Signed-off-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07wlcore: Fix command execute failure 19 for wl12xxTony Lindgren3-20/+1
[ Upstream commit cb88d01b67383a095e3f7caeb4cdade5a6cf0417 ] We can currently get a "command execute failure 19" error on beacon loss if the signal is weak: wlcore: Beacon loss detected. roles:0xff wlcore: Connection loss work (role_id: 0). ... wlcore: ERROR command execute failure 19 ... WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803 ... (wl12xx_queue_recovery_work.part.0 [wlcore]) (wl12xx_cmd_role_start_sta [wlcore]) (wl1271_op_bss_info_changed [wlcore]) (ieee80211_prep_connection [mac80211]) Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware, and seems to mean that the firmware no longer wants to see the quirk handling for WLCORE_QUIRK_START_STA_FAILS done. This quirk got added with commit 18eab430700d ("wlcore: workaround start_sta problem in wl12xx fw"), and it seems that this already got fixed in the firmware long time ago back in 2012 as wl18xx never had this quirk in place to start with. As we no longer even support firmware that early, to me it seems that it's safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks like earlier firmware got disabled back in 2013 with commit 0e284c074ef9 ("wl12xx: increase minimum singlerole firmware version required"). If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any firmware that the driver works with, we can simply revert this patch and add extra checks for firmware version used. With this fix wlcore reconnects properly after a beacon loss. Cc: Raz Bouganim <r-bouganim@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07vt/consolemap: do font sum unsignedJiri Slaby1-1/+1
[ Upstream commit 9777f8e60e718f7b022a94f2524f967d8def1931 ] The constant 20 makes the font sum computation signed which can lead to sign extensions and signed wraps. It's not much of a problem as we build with -fno-strict-overflow. But if we ever decide not to, be ready, so switch the constant to unsigned. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-10 19:13:56 +0300