summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21net: enetc: correct the indexes of highest and 2nd highest TCsWei Fang1-2/+2
[ Upstream commit 21225873be1472b7c59ed3650396af0e40578112 ] For ENETC hardware, the TCs are numbered from 0 to N-1, where N is the number of TCs. Numerically higher TC has higher priority. It's obvious that the highest priority TC index should be N-1 and the 2nd highest priority TC index should be N-2. However, the previous logic uses netdev_get_prio_tc_map() to get the indexes of highest priority and 2nd highest priority TCs, it does not make sense and is incorrect to give a "tc" argument to netdev_get_prio_tc_map(). So the driver may get the wrong indexes of the two highest priotiry TCs which would lead to failed to set the CBS for the two highest priotiry TCs. e.g. $ tc qdisc add dev eno0 parent root handle 100: mqprio num_tc 6 \ map 0 0 1 1 2 3 4 5 queues 1@0 1@1 1@2 1@3 2@4 2@6 hw 1 $ tc qdisc replace dev eno0 parent 100:6 cbs idleslope 100000 \ sendslope -900000 hicredit 12 locredit -113 offload 1 $ Error: Specified device failed to setup cbs hardware offload. ^^^^^ In this example, the previous logic deems the indexes of the two highest priotiry TCs should be 3 and 2. Actually, the indexes are 5 and 4, because the number of TCs is 6. So it would be failed to configure the CBS for the two highest priority TCs. Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21spi: fsl-dspi: avoid SCK glitches with continuous transfersVladimir Oltean1-0/+15
[ Upstream commit c5c31fb71f16ba75bad4ade208abbae225305b65 ] The DSPI controller has configurable timing for (a) tCSC: the interval between the assertion of the chip select and the first clock edge (b) tASC: the interval between the last clock edge and the deassertion of the chip select What is a bit surprising, but is documented in the figure "Example of continuous transfer (CPHA=1, CONT=1)" in the datasheet, is that when the chip select stays asserted between multiple TX FIFO writes, the tCSC and tASC times still apply. With CONT=1, chip select remains asserted, but SCK takes a break and goes to the idle state for tASC + tCSC ns. In other words, the default values (of 0 and 0 ns) result in SCK glitches where the SCK transition to the idle state, as well as the SCK transition from the idle state, will have no delay in between, and it may appear that a SCK cycle has simply gone missing. The resulting timing violation might cause data corruption in many peripherals, as their chip select is asserted. The driver has device tree bindings for tCSC ("fsl,spi-cs-sck-delay") and tASC ("fsl,spi-sck-cs-delay"), but these are only specified to apply when the chip select toggles in the first place, and this timing characteristic depends on each peripheral. Many peripherals do not have explicit timing requirements, so many device trees do not have these properties present at all. Nonetheless, the lack of SCK glitches is a common sense requirement, and since the SCK stays in the idle state during transfers for tCSC+tASC ns, and that in itself should look like half a cycle, then let's ensure that tCSC and tASC are at least a quarter of a SCK period, such that their sum is at least half of one. Fixes: 95bf15f38641 ("spi: fsl-dspi: Add ~50ns delay between cs and sck") Reported-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com> Debugged-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com> Tested-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230529223402.1199503-1-vladimir.oltean@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21RDMA/rtrs: Fix the last iu->buf leak in err pathLi Zhijian1-1/+3
[ Upstream commit 3bf3a7c6985c625f64e73baefdaa36f1c2045a29 ] The last iu->buf will leak if ib_dma_mapping_error() fails. Fixes: c0894b3ea69d ("RDMA/rtrs: core: lib functions shared between client and server modules") Link: https://lore.kernel.org/r/1682384563-2-3-git-send-email-lizhijian@fujitsu.com Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21usb: dwc3: gadget: Reset num TRBs before giving back the requestElson Roy Serrao1-0/+1
commit 00f8205ffcf112dcef14f8151d78075d38d22c08 upstream. Consider a scenario where cable disconnect happens when there is an active usb reqest queued to the UDC. As part of the disconnect we would issue an end transfer with no interrupt-on-completion before giving back this request. Since we are giving back the request without skipping TRBs the num_trbs field of dwc3_request still holds the stale value previously used. Function drivers re-use same request for a given bind-unbind session and hence their dwc3_request context gets preserved across cable disconnect/connect. When such a request gets re-queued after cable connect, we would increase the num_trbs field on top of the previous stale value thus incorrectly representing the number of TRBs used. Fix this by resetting num_trbs field before giving back the request. Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Message-ID: <1685654850-8468-1-git-send-email-quic_eserrao@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21serial: lantiq: add missing interrupt ackBernhard Seibold1-0/+1
commit 306320034e8fbe7ee1cc4f5269c55658b4612048 upstream. Currently, the error interrupt is never acknowledged, so once active it will stay active indefinitely, causing the handler to be called in an infinite loop. Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.") Cc: <stable@vger.kernel.org> Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21USB: serial: option: add Quectel EM061KGL seriesJerry Meng1-0/+16
commit f1832e2b5e498e258b090af3b065b85cf8cc5161 upstream. Add support for Quectel EM061KGL series which are based on Qualcomm SDX12 chip: EM061KGL_LTA(0x2c7c / 0x0123): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LMS(0x2c7c / 0x0124): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LWW(0x2c7c / 0x6008): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LCN(0x2c7c / 0x6009): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL Above products use the exact same interface layout and option driver is for interfaces DIAG, NMEA and AT. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6008 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM061K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng <jerry-meng@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21net: usb: qmi_wwan: add support for Compal RXM-G1Wes Huang1-0/+2
commit 863199199713908afaa47ba09332b87621c12496 upstream. Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip. This patch adds support for two compositions: 0x9091: DIAG + MODEM + QMI_RMNET + ADB 0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=9091 Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=90db Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Wes Huang <wes.huang@moxa.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21RDMA/uverbs: Restrict usage of privileged QKEYsEdward Srouji1-1/+6
commit 0cadb4db79e1d9eea66711c4031e435c2191907e upstream. According to the IB specification rel-1.6, section 3.5.3: "QKEYs with the most significant bit set are considered controlled QKEYs, and a HCA does not allow a consumer to arbitrarily specify a controlled QKEY." Thus, block non-privileged users from setting such a QKEY. Cc: stable@vger.kernel.org Fixes: bc38a6abdd5a ("[PATCH] IB uverbs: core implementation") Signed-off-by: Edward Srouji <edwards@nvidia.com> Link: https://lore.kernel.org/r/c00c809ddafaaf87d6f6cb827978670989a511b3.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21nouveau: fix client work fence deletion raceDave Airlie1-4/+10
commit c8a5d5ea3ba6a18958f8d76430e4cd68eea33943 upstream. This seems to have existed for ever but is now more apparant after commit 9bff18d13473 ("drm/ttm: use per BO cleanup workers") My analysis: two threads are running, one in the irq signalling the fence, in dma_fence_signal_timestamp_locked, it has done the DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the callbacks. The second thread in nouveau_cli_work_ready, where it sees the fence is signalled, so then puts the fence, cleanups the object and frees the work item, which contains the callback. Thread one goes again and tries to call the callback and causes the use-after-free. Proposed fix: lock the fence signalled check in nouveau_cli_work_ready, so either the callbacks are done or the memory is freed. Reviewed-by: Karol Herbst <kherbst@redhat.com> Fixes: 11e451e74050 ("drm/nouveau: remove fence wait code from deferred client work handler") Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21irqchip/gic: Correctly validate OF quirk descriptorsMarc Zyngier1-0/+2
[ Upstream commit 91539341a3b6e9c868024a4292455dae36e6f58c ] When checking for OF quirks, make sure either 'compatible' or 'property' is set, and give up otherwise. This avoids non-OF quirks being randomly applied as they don't have any of the OF data that need checking. Cc: Douglas Anderson <dianders@chromium.org> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21drm:amd:amdgpu: Fix missing buffer object unlock in failure pathSukrut Bellary2-2/+6
[ Upstream commit 60ecaaf54886b0642d5c4744f7fbf1ff0d6b3e42 ] smatch warning - 1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. 2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21xen/blkfront: Only check REQ_FUA for writesRoss Lagerwall1-1/+2
[ Upstream commit b6ebaa8100090092aa602530d7e8316816d0c98d ] The existing code silently converts read operations with the REQ_FUA bit set into write-barrier operations. This results in data loss as the backend scribbles zeroes over the data instead of returning it. While the REQ_FUA bit doesn't make sense on a read operation, at least one well-known out-of-tree kernel module does set it and since it results in data loss, let's be safe here and only look at REQ_FUA for writes. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21parisc: Flush gatt writes and adjust gatt mask in parisc_agp_mask_memory()Helge Deller1-1/+14
[ Upstream commit d703797380c540bbeac03f104ebcfc364eaf47cc ] Flush caches after changing gatt entries and calculate entry according to SBA requirements. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: Fix logic checking if system is running from batteryMario Limonciello1-2/+6
[ Upstream commit 95339f40a8b652b5b1773def31e63fc53c26378a ] The logic used for power_supply_is_system_supplied() counts all power supplies and assumes that the system is running from AC if there is either a non-battery power-supply reporting to be online or if no power-supplies exist at all. The second rule is for desktop systems, that don't have any battery/charger devices. These systems will incorrectly report to be powered from battery once a device scope power-supply is registered (e.g. a HID device), since these power-supplies increase the counter. Apart from HID devices, recent dGPUs provide UCSI power supplies on a desktop systems. The dGPU by default doesn't have anything plugged in so it's 'offline'. This makes power_supply_is_system_supplied() return 0 with a count of 1 meaning all drivers that use this get a wrong judgement. To fix this case adjust the logic to also examine the scope of the power supply. If the power supply is deemed a device power supply, then don't count it. Cc: Evan Quan <Evan.Quan@amd.com> Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issuesDouglas Anderson3-2/+27
[ Upstream commit 44bd78dd2b8897f59b7e3963f088caadb7e4f047 ] Some Chromebooks with Mediatek SoCs have a problem where the firmware doesn't properly save/restore certain GICR registers. Newer Chromebooks should fix this issue and we may be able to do firmware updates for old Chromebooks. At the moment, the only known issue with these Chromebooks is that we can't enable "pseudo NMIs" since the priority register can be lost. Enabling "pseudo NMIs" on Chromebooks with the problematic firmware causes crashes and freezes. Let's detect devices with this problem and then disable "pseudo NMIs" on them. We'll detect the problem by looking for the presence of the "mediatek,broken-save-restore-fw" property in the GIC device tree node. Any devices with fixed firmware will not have this property. Our detection plan works because we never bake a Chromebook's device tree into firmware. Instead, device trees are always bundled with the kernel. We'll update the device trees of all affected Chromebooks and then we'll never enable "pseudo NMI" on a kernel that is bundled with old device trees. When a firmware update is shipped that fixes this issue it will know to patch the device tree to remove the property. In order to make this work, the quick detection mechanism of the GICv3 code is extended to be able to look for properties in addition to looking at "compatible". Reviewed-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230515131353.v2.2.I88dc0a0eb1d9d537de61604cd8994ecc55c0cac1@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21regulator: Fix error checking for debugfs_create_dirOsama Muhammad1-2/+2
[ Upstream commit 2bf1c45be3b8f3a3f898d0756c1282f09719debd ] This patch fixes the error checking in core.c in debugfs_create_dir. The correct way to check if an error occurred is 'IS_ERR' inline function. Signed-off-by: Osama Muhammad <osmtendev@gmail.com Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com Link: https://lore.kernel.org/r/20230515172938.13338-1-osmtendev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0Alexandru Sorodoc1-0/+2
[ Upstream commit 362c1f2ec82cb65940e1c73e15a395a7a891fc6f ] On ASUS GU604V the key 0x7B is issued when the charger is connected or disconnected, and key 0xC0 is issued when an external display is connected or disconnected. This commit maps them to KE_IGNORE to slience kernel messages about unknown keys, such as: kernel: asus_wmi: Unknown key code 0x7b Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com> Link: https://lore.kernel.org/r/20230512101517.47416-1-ealex95@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: Ratelimit no data debug outputMarek Vasut1-1/+2
[ Upstream commit 155c45a25679f571c2ae57d10db843a9dfc63430 ] Reduce the amount of output this dev_dbg() statement emits into logs, otherwise if system software polls the sysfs entry for data and keeps getting -ENODATA, it could end up filling the logs up. This does in fact make systemd journald choke, since during boot the sysfs power supply entries are polled and if journald starts at the same time, the journal is just being repeatedly filled up, and the system stops on trying to start journald without booting any further. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()Hans de Goede1-4/+2
[ Upstream commit 59dddea9879713423c7b2ade43c423bb71e0d216 ] Use mod_delayed_work() instead of separate cancel_delayed_work_sync() + schedule_delayed_work() calls. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: sc27xx: Fix external_power_changed raceHans de Goede1-8/+1
[ Upstream commit 4d5c129d6c8993fe96e9ae712141eedcb9ca68c2 ] sc27xx_fgu_external_power_changed() dereferences data->battery, which gets sets in ab8500_btemp_probe() like this: data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc, &fgu_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where sc27xx_fgu_external_power_changed() may get called while data->battery has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in data->battery, so sc27xx_fgu_external_power_changed() can simply directly use the passed in psy argument which is always valid. After this change sc27xx_fgu_external_power_changed() is reduced to just "power_supply_changed(psy);" and it has the same prototype. While at it simply replace it with making the external_power_changed callback directly point to power_supply_changed. Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: ab8500: Fix external_power_changed raceHans de Goede2-8/+4
[ Upstream commit a5299ce4e96f3e8930e9c051b28d8093ada87b08 ] ab8500_btemp_external_power_changed() dereferences di->btemp_psy, which gets sets in ab8500_btemp_probe() like this: di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where ab8500_btemp_external_power_changed() may get called while di->btemp_psy has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in di->btemp_psy, so ab8500_btemp_external_power_changed() can simply directly use the passed in psy argument which is always valid. And the same applies to ab8500_fg_external_power_changed(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14Revert "staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICE"Greg Kroah-Hartman2-3/+8
This reverts commit bb1313f37e7b267fcf0fe475b974be8de5f39945 which is commit fda2093860df4812d69052a8cf4997e53853a340 upstream. Ben reports that this should not have been backported to the older kernels as the rest of the macro is not empty. It was a clean-up patch in 6.4-rc1 only, it did not add new device ids. Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/r/aa0d401a7f63448cd4c2fe4a2d7e8495d9aa123e.camel@decadent.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14drm/atomic: Don't pollute crtc_state->mode_blob with error pointersVille Syrjälä1-6/+8
commit 439cf34c8e0a8a33d8c15a31be1b7423426bc765 upstream. Make sure we don't assign an error pointer to crtc_state->mode_blob as that will break all kinds of places that assume either NULL or a valid pointer (eg. drm_property_blob_put()). Cc: stable@vger.kernel.org Reported-by: fuyufan <fuyufan@huawei.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-1-ville.syrjala@linux.intel.com Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14vhost: support PACKED when setting-getting vring_baseShannon Nelson2-7/+19
[ Upstream commit 55d8122f5cd62d5aaa225d7167dcd14a44c850b9 ] Use the right structs for PACKED or split vqs when setting and getting the vring base. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230424225031.18947-3-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14eeprom: at24: also select REGMAPRandy Dunlap1-0/+1
[ Upstream commit 7f3c782b3914e510b646a77aedc3adeac2e4a63b ] Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors, so also select REGMAP to prevent the build errors. ../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration 540 | struct regmap_config *regmap_config) ../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client': ../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c: In function 'at24_probe': ../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable] Fixes: 5c015258478e ("eeprom: at24: add basic regmap_i2c support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14i2c: sprd: Delete i2c adapter in .remove's error pathUwe Kleine-König1-3/+5
[ Upstream commit ca0aa17f2db3468fd017038d23a78e17388e2f67 ] If pm runtime resume fails the .remove callback used to exit early. This resulted in an error message by the driver core but the device gets removed anyhow. This lets the registered i2c adapter stay around with an unbound parent device. So only skip clk disabling if resume failed, but do delete the adapter. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14staging: vc04_services: fix gcc-13 build warningGreg Kroah-Hartman1-2/+2
Not upstream as newer kernels fixed this properly. Fix up a mismatched function prototype warning in the vc04_services driver that gcc-13 shows. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14usb: usbfs: Use consistent mmap functionsRuihan Li1-2/+9
commit d0b861653f8c16839c3035875b556afc4472f941 upstream. When hcd->localmem_pool is non-null, localmem_pool is used to allocate DMA memory. In this case, the dma address will be properly returned (in dma_handle), and dma_mmap_coherent should be used to map this memory into the user space. However, the current implementation uses pfn_remap_range, which is supposed to map normal pages. Instead of repeating the logic in the memory allocation function, this patch introduces a more robust solution. Here, the type of allocated memory is checked by testing whether dma_handle is properly set. If dma_handle is properly returned, it means some DMA pages are allocated and dma_mmap_coherent should be used to map them. Otherwise, normal pages are allocated and pfn_remap_range should be called. This ensures that the correct mmap functions are used consistently, independently with logic details that determine which type of memory gets allocated. Fixes: a0e710a7def4 ("USB: usbfs: fix mmap dma mismatch") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Link: https://lore.kernel.org/r/20230515130958.32471-3-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14usb: usbfs: Enforce page requirements for mmapRuihan Li2-4/+46
commit 0143d148d1e882fb1538dc9974c94d63961719b9 upstream. The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14pinctrl: meson-axg: add missing GPIOA_18 gpio groupMartin Hundebøll1-0/+1
commit 5b10ff013e8a57f8845615ac2cc37edf7f6eef05 upstream. Without this, the gpio cannot be explicitly mux'ed to its gpio function. Fixes: 83c566806a68a ("pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC") Cc: stable@vger.kernel.org Signed-off-by: Martin Hundebøll <martin@geanix.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Link: https://lore.kernel.org/r/20230512064925.133516-1-martin@geanix.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14rbd: get snapshot context after exclusive lock is ensured to be heldIlya Dryomov1-7/+23
commit 870611e4877eff1e8413c3fb92a585e45d5291f6 upstream. Move capturing the snapshot context into the image request state machine, after exclusive lock is ensured to be held for the duration of dealing with the image request. This is needed to ensure correctness of fast-diff states (OBJECT_EXISTS vs OBJECT_EXISTS_CLEAN) and object deltas computed based off of them. Otherwise the object map that is forked for the snapshot isn't guaranteed to accurately reflect the contents of the snapshot when the snapshot is taken under I/O. This breaks differential backup and snapshot-based mirroring use cases with fast-diff enabled: since some object deltas may be incomplete, the destination image may get corrupted. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/61472 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag settingIlya Dryomov1-11/+21
commit 09fe05c57b5aaf23e2c35036c98ea9f282b19a77 upstream. Move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting into the object request state machine to allow for the snapshot context to be captured in the image request state machine rather than in rbd_queue_workfn(). Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14tee: amdtee: Add return_origin to 'struct tee_cmd_load_ta'Rijo Thomas2-17/+23
commit 436eeae0411acdfc54521ddea80ee76d4ae8a7ea upstream. After TEE has completed processing of TEE_CMD_ID_LOAD_TA, set proper value in 'return_origin' argument passed by open_session() call. To do so, add 'return_origin' field to the structure tee_cmd_load_ta. The Trusted OS shall update return_origin as part of TEE processing. This change to 'struct tee_cmd_load_ta' interface requires a similar update in AMD-TEE Trusted OS's TEE_CMD_ID_LOAD_TA interface. This patch has been verified on Phoenix Birman setup. On older APUs, return_origin value will be 0. Cc: stable@vger.kernel.org Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Tested-by: Sourabh Das <sourabh.das@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14Bluetooth: hci_qca: fix debugfs registrationJohan Hovold1-1/+5
commit 47c5d829a3e326b7395352a10fc8a6effe7afa15 upstream. Since commit 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990"), the setup callback which registers the debugfs interface can be called multiple times. This specifically leads to the following error when powering on the controller: debugfs: Directory 'ibs' with parent 'hci0' already present! Add a driver flag to avoid trying to register the debugfs interface more than once. Fixes: 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990") Cc: stable@vger.kernel.org # 4.20 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14s390/dasd: Use correct lock while counting channel queue lengthJan Höppner1-2/+2
commit ccc45cb4e7271c74dbb27776ae8f73d84557f5c6 upstream. The lock around counting the channel queue length in the BIODASDINFO ioctl was incorrectly changed to the dasd_block->queue_lock with commit 583d6535cb9d ("dasd: remove dead code"). This can lead to endless list iterations and a subsequent crash. The queue_lock is supposed to be used only for queue lists belonging to dasd_block. For dasd_device related queue lists the ccwdev lock must be used. Fix the mentioned issues by correctly using the ccwdev lock instead of the queue lock. Fixes: 583d6535cb9d ("dasd: remove dead code") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14drm/amdgpu: fix xclk freq on CHIP_STONEYChia-I Wu1-2/+9
commit b447b079cf3a9971ea4d31301e673f49612ccc18 upstream. According to Alex, most APUs from that time seem to have the same issue (vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I limit the fixup to CHIP_STONEY Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14Input: psmouse - fix OOB access in Elantech protocolDmitry Torokhov1-4/+5
commit 7b63a88bb62ba2ddf5fcd956be85fe46624628b9 upstream. The kernel only allocate 5 MT slots; check that transmitted slot ID falls within the acceptable range. Link: https://lore.kernel.org/r/ZFnEL91nrT789dbG@google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14Input: xpad - delete a Razer DeathAdder mouse VID/PID entryIsmael Ferreras Morezuelas1-1/+0
commit feee70f4568650cf44c573488798ffc0a2faeea3 upstream. While doing my research to improve the xpad device names I noticed that the 1532:0037 VID/PID seems to be used by the DeathAdder 2013, so that Razer Sabertooth instance looked wrong and very suspect to me. I didn't see any mention in the official drivers, either. After doing more research, it turns out that the xpad list is used by many other projects (like Steam) as-is [1], this issue was reported [2] and Valve/Sam Lantinga fixed it [3]: [1]: https://github.com/libsdl-org/SDL/blob/dcc5eef0e2395854b254ea2873a4899edab347c6/src/joystick/controller_type.h#L251 [2]: https://steamcommunity.com/app/353380/discussions/0/1743392486228754770/ [3]: https://hg.libsdl.org/SDL/rev/29809f6f0271 (With multiple Internet users reporting similar issues, not linked here) After not being able to find the correct VID/PID combination anywhere on the Internet and not receiving any reply from Razer support I did some additional detective work, it seems like it presents itself as "Razer Sabertooth Gaming Controller (XBOX360)", code 1689:FE00. Leaving us with this: * Razer Sabertooth (1689:fe00) * Razer Sabertooth Elite (24c6:5d04) * Razer DeathAdder 2013 (1532:0037) [note: not a gamepad] So, to sum things up; remove this conflicting/duplicate entry: { 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 }, As the real/correct one is already present there, even if the Internet as a whole insists on presenting it as the Razer Sabertooth Elite, which (by all accounts) is not: { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 }, Actual change in SDL2 referencing this kernel issue: https://github.com/libsdl-org/SDL/commit/e5e54169754ca5d3e86339d968b20126d9da0a15 For more information of the device, take a look here: https://github.com/xboxdrv/xboxdrv/pull/59 You can see a lsusb dump here: https://github.com/xboxdrv/xboxdrv/files/76581/Qa6dBcrv.txt Fixes: f554f619b70 ("Input: xpad - sync device IDs with xboxdrv") Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/5c12dbdb-5774-fc68-5c58-ca596383663e@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacksSomnath Kotur1-7/+18
[ Upstream commit 1eb4ef12591348c440ac9d6efcf7521e73cf2b10 ] As per the new udp tunnel framework, drivers which need to know the details of a port entry (i.e. port type) when it gets deleted should use the .set_port / .unset_port callbacks. Implementing the current .udp_tunnel_sync callback would mean that the deleted tunnel port entry would be all zeros. This used to work on older firmware because it would not check the input when deleting a tunnel port. With newer firmware, the delete will now fail and subsequent tunnel port allocation will fail as a result. Fixes: 442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra") Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14bnxt_en: Query default VLAN before VNIC setup on a VFSomnath Kotur1-0/+3
[ Upstream commit 1a9e4f501bc6ff1b6ecb60df54fbf2b54db43bfe ] We need to call bnxt_hwrm_func_qcfg() on a VF to query the default VLAN that may be setup by the PF. If a default VLAN is enabled, the VF cannot support VLAN acceleration on the receive side and the VNIC must be setup to strip out the default VLAN tag. If a default VLAN is not enabled, the VF can support VLAN acceleration on the receive side. The VNIC should be set up to strip or not strip the VLAN based on the RX VLAN acceleration setting. Without this call to determine the default VLAN before calling bnxt_setup_vnic(), the VNIC may not be set up correctly. For example, bnxt_setup_vnic() may set up to strip the VLAN tag based on stale default VLAN information. If RX VLAN acceleration is not enabled, the VLAN tag will be incorrectly stripped and the RX data path will not work correctly. Fixes: cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14bnxt_en: Don't issue AP reset during ethtool's reset operationSreekanth Reddy1-1/+1
[ Upstream commit 1d997801c7cc6a7f542e46d5a6bf16f893ad3fe9 ] Only older NIC controller's firmware uses the PROC AP reset type. Firmware on 5731X/5741X and newer chips does not support this reset type. When bnxt_reset() issues a series of resets, this PROC AP reset may actually fail on these newer chips because the firmware is not ready to accept this unsupported command yet. Avoid this unnecessary error by skipping this reset type on chips that don't support it. Fixes: 7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14qed/qede: Fix scheduling while atomicManish Chopra4-4/+60
[ Upstream commit 42510dffd0e2c27046905f742172ed6662af5557 ] Statistics read through bond interface via sysfs causes below bug and traces as it triggers the bonding module to collect the slave device statistics while holding the spinlock, beneath that qede->qed driver statistics flow gets scheduled out due to usleep_range() used in PTT acquire logic [ 3673.988874] Hardware name: HPE ProLiant DL365 Gen10 Plus/ProLiant DL365 Gen10 Plus, BIOS A42 10/29/2021 [ 3673.988878] Call Trace: [ 3673.988891] dump_stack_lvl+0x34/0x44 [ 3673.988908] __schedule_bug.cold+0x47/0x53 [ 3673.988918] __schedule+0x3fb/0x560 [ 3673.988929] schedule+0x43/0xb0 [ 3673.988932] schedule_hrtimeout_range_clock+0xbf/0x1b0 [ 3673.988937] ? __hrtimer_init+0xc0/0xc0 [ 3673.988950] usleep_range+0x5e/0x80 [ 3673.988955] qed_ptt_acquire+0x2b/0xd0 [qed] [ 3673.988981] _qed_get_vport_stats+0x141/0x240 [qed] [ 3673.989001] qed_get_vport_stats+0x18/0x80 [qed] [ 3673.989016] qede_fill_by_demand_stats+0x37/0x400 [qede] [ 3673.989028] qede_get_stats64+0x19/0xe0 [qede] [ 3673.989034] dev_get_stats+0x5c/0xc0 [ 3673.989045] netstat_show.constprop.0+0x52/0xb0 [ 3673.989055] dev_attr_show+0x19/0x40 [ 3673.989065] sysfs_kf_seq_show+0x9b/0xf0 [ 3673.989076] seq_read_iter+0x120/0x4b0 [ 3673.989087] new_sync_read+0x118/0x1a0 [ 3673.989095] vfs_read+0xf3/0x180 [ 3673.989099] ksys_read+0x5f/0xe0 [ 3673.989102] do_syscall_64+0x3b/0x90 [ 3673.989109] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3673.989115] RIP: 0033:0x7f8467d0b082 [ 3673.989119] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 05 08 00 e8 35 e7 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 3673.989121] RSP: 002b:00007ffffb21fd08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 3673.989127] RAX: ffffffffffffffda RBX: 000000000100eca0 RCX: 00007f8467d0b082 [ 3673.989128] RDX: 00000000000003ff RSI: 00007ffffb21fdc0 RDI: 0000000000000003 [ 3673.989130] RBP: 00007f8467b96028 R08: 0000000000000010 R09: 00007ffffb21ec00 [ 3673.989132] R10: 00007ffffb27b170 R11: 0000000000000246 R12: 00000000000000f0 [ 3673.989134] R13: 0000000000000003 R14: 00007f8467b92000 R15: 0000000000045a05 [ 3673.989139] CPU: 30 PID: 285188 Comm: read_all Kdump: loaded Tainted: G W OE Fix this by collecting the statistics asynchronously from a periodic delayed work scheduled at default stats coalescing interval and return the recent copy of statisitcs from .ndo_get_stats64(), also add ability to configure/retrieve stats coalescing interval using below commands - ethtool -C ethx stats-block-usecs <val> ethtool -c ethx Fixes: 133fac0eedc3 ("qede: Add basic ethtool support") Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Manish Chopra <manishc@marvell.com> Link: https://lore.kernel.org/r/20230605112600.48238-1-manishc@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14net: dsa: lan9303: allow vid != 0 in port_fdb_{add|del} methodsAlexander Sverdlin1-4/+0
[ Upstream commit 5a59a58ec25d44f853c26bdbfda47d73b3067435 ] LAN9303 doesn't associate FDB (ALR) entries with VLANs, it has just one global Address Logic Resolution table [1]. Ignore VID in port_fdb_{add|del} methods, go on with the global table. This is the same semantics as hellcreek or RZ/N1 implement. Visible symptoms: LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to delete 00:xx:xx:xx:xx:cf vid 1 from fdb: -2 LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to add 00:xx:xx:xx:xx:cf vid 1 to fdb: -95 [1] https://ww1.microchip.com/downloads/en/DeviceDoc/00002308A.pdf Fixes: 0620427ea0d6 ("net: dsa: lan9303: Add fdb/mdb manipulation") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230531143826.477267-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_pollLorenzo Bianconi1-0/+3
[ Upstream commit 30bc32c7c1f975cc3c14e1c7dc437266311282cf ] Grab sta_poll_lock spinlock in mt7615_mac_sta_poll routine in order to avoid possible races with mt7615_mac_add_txs() or mt7615_mac_fill_rx() removing msta pointer from sta_poll_list. Fixes: a621372a04ac ("mt76: mt7615: rework mt7615_mac_sta_poll for usb code") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/48b23404b759de4f1db2ef85975c72a4aeb1097c.1684938695.git.lorenzo@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14spi: qup: Request DMA before enabling clocksStephan Gerhold1-19/+18
[ Upstream commit 0c331fd1dccfba657129380ee084b95c1cedfbef ] It is usually better to request all necessary resources (clocks, regulators, ...) before starting to make use of them. That way they do not change state in case one of the resources is not available yet and probe deferral (-EPROBE_DEFER) is necessary. This is particularly important for DMA channels and IOMMUs which are not enforced by fw_devlink yet (unless you use fw_devlink.strict=1). spi-qup does this in the wrong order, the clocks are enabled and disabled again when the DMA channels are not available yet. This causes issues in some cases: On most SoCs one of the SPI QUP clocks is shared with the UART controller. When using earlycon UART is actively used during boot but might not have probed yet, usually for the same reason (waiting for the DMA controller). In this case, the brief enable/disable cycle ends up gating the clock and further UART console output will halt the system completely. Avoid this by requesting the DMA channels before changing the clock state. Fixes: 612762e82ae6 ("spi: qup: Add DMA capabilities") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14staging: vchiq_core: drop vchiq_status from vchiq_initialiseStefan Wahren1-9/+11
commit abf2836a381a30763e24acd58da56fa615c6581a upstream. Replace the custom set of return values with proper Linux error codes for vchiq_initialise(). Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1619347863-16080-11-git-send-email-stefan.wahren@i2se.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14i40e: fix build warning in ice_fltr_add_mac_to_list()Greg Kroah-Hartman1-1/+1
Not upstream as this was fixed in a much larger change in commit 5e24d5984c80 ("ice: Use int for ice_status") The function ice_fltr_add_mac_to_list() has the wrong prototype match from the .h file to the .c declaration, so fix it up, otherwise gcc-13 complains (rightfully) that the type is incorrect. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14i40e: fix build warnings in i40e_alloc.hGreg Kroah-Hartman1-11/+6
Not upstream as it was fixed in a much larger api change in newer kernels. gcc-13 rightfully complains that enum is not the same as an int, so fix up the function prototypes in i40e_alloc.h to be correct, solving a bunch of build warnings. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14i40iw: fix build warning in i40iw_manage_apbvt()Greg Kroah-Hartman1-3/+2
Not upstream as this function is no longer around anymore. The function i40iw_manage_apbvt() has the wrong prototype match from the .h file to the .c declaration, so fix it up, otherwise gcc-13 complains (rightfully) that the type is incorrect. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14remove the sx8 block driverChristoph Hellwig3-1597/+0
commit d13bc4d84a8e91060d3797fc95c1a0202bfd1499 upstream. This driver is for fairly obscure hardware, and has only seen random drive-by changes after the maintainer stopped working on it in 2005 (about a year and a half after it was introduced). It has some "interesting" block layer interactions, so let's just drop it unless anyone complains. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220721064102.1715460-1-hch@lst.de [axboe: fix date typo, it was in 2005, not 2015] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 15:39:19 +0300