summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21drm/i915/gen11+: Only load DRAM information from pcodeJosé Roberto de Souza4-75/+93
[ Upstream commit 5d0c938ec9cc96fc7b8abcff0ca8b2a084e9c90c ] Up to now we were reading some DRAM information from MCHBAR register and from pcode what is already not good but some GEN12(TGL-H and ADL-S) platforms have MCHBAR DRAM information in different offsets. This was notified to HW team that decided that the best alternative is always apply the 16gb_dimm watermark adjustment for GEN12+ platforms and read the remaning DRAM information needed to other display programming from pcode. So here moving the DRAM pcode function to intel_dram.c, removing the duplicated fields from intel_qgv_info, setting and using information from dram_info. v2: - bring back num_points to intel_qgv_info as num_qgv_point can be overwritten in icl_get_qgv_points() - add gen12_get_dram_info() and simplify gen11_get_dram_info() Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-2-jose.souza@intel.com Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21drm/i915/dg1: Wait for pcode/uncore handshake at startupMatt Roper4-0/+23
[ Upstream commit f9c730ede7d3f40900cb493890d94d868ff2f00f ] DG1 does some additional pcode/uncore handshaking at boot time; this handshaking must complete before various other pcode commands are effective and before general work is submitted to the GPU. We need to poll a new pcode mailbox during startup until it reports that this handshaking is complete. The bspec doesn't give guidance on how long we may need to wait for this handshaking to complete. For now, let's just set a really long timeout; if we still don't get a completion status by the end of that timeout, we'll just continue on and hope for the best. v2 (Lucas): Rename macros to make clear the relation between command and result (requested by José) Bspec: 52065 Cc: Clinton Taylor <Clinton.A.Taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201001063917.3133475-2-lucas.demarchi@intel.com Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21media: dvb-core: Fix use-after-free due to race at dvb_register_device()Hyunwoo Kim1-21/+63
commit 627bb528b086b4136315c25d6a447a98ea9448d3 upstream. dvb_register_device() dynamically allocates fops with kmemdup() to set the fops->owner. And these fops are registered in 'file->f_ops' using replace_fops() in the dvb_device_open() process, and kfree()d in dvb_free_device(). However, it is not common to use dynamically allocated fops instead of 'static const' fops as an argument of replace_fops(), and UAF may occur. These UAFs can occur on any dvb type using dvb_register_device(), such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc. So, instead of kfree() the fops dynamically allocated in dvb_register_device() in dvb_free_device() called during the .disconnect() process, kfree() it collectively in exit_dvbdev() called when the dvbdev.c module is removed. Link: https://lore.kernel.org/linux-media/20221117045925.14297-4-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21media: dvbdev: fix error logic at dvb_register_device()Mauro Carvalho Chehab1-0/+3
commit 1fec2ecc252301110e4149e6183fa70460d29674 upstream. As reported by smatch: drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:510 dvb_register_device() warn: '&dvbdev->list_head' not removed from list drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:530 dvb_register_device() warn: '&dvbdev->list_head' not removed from list drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:545 dvb_register_device() warn: '&dvbdev->list_head' not removed from list The error logic inside dvb_register_device() doesn't remove devices from the dvb_adapter_list in case of errors. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21media: dvbdev: Fix memleak in dvb_register_deviceDinghao Liu1-0/+3
commit 167faadfcf9339088910e9e85a1b711fcbbef8e9 upstream. When device_create() fails, dvbdev and dvbdevfops should be freed just like when dvb_register_media_device() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21mmc: block: ensure error propagation for non-blkChristian Loehle1-0/+5
commit 003fb0a51162d940f25fc35e70b0996a12c9e08a upstream. Requests to the mmc layer usually come through a block device IO. The exceptions are the ioctl interface, RPMB chardev ioctl and debugfs, which issue their own blk_mq requests through blk_execute_rq and do not query the BLK_STS error but the mmcblk-internal drv_op_result. This patch ensures that drv_op_result defaults to an error and has to be overwritten by the operation to be considered successful. The behavior leads to a bug where the request never propagates the error, e.g. by directly erroring out at mmc_blk_mq_issue_rq if mmc_blk_part_switch fails. The ioctl caller of the rpmb chardev then can never see an error (BLK_STS_IOERR, but drv_op_result is unchanged) and thus may assume that their call executed successfully when it did not. While always checking the blk_execute_rq return value would be advised, let's eliminate the error by always setting drv_op_result as -EIO to be overwritten on success (or other error) Fixes: 614f0388f580 ("mmc: block: move single ioctl() commands to block requests") Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/59c17ada35664b818b7bd83752119b2d@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21net: lapbether: only support ethernet devicesEric Dumazet1-0/+3
[ Upstream commit 9eed321cde22fc1afd76eac563ce19d899e0d6b2 ] It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21drm/nouveau: add nv_encoder pointer check for NULLNatalia Petrova1-1/+2
[ Upstream commit 55b94bb8c42464bad3d2217f6874aa1a85664eac ] Pointer nv_encoder could be dereferenced at nouveau_connector.c in case it's equal to NULL by jumping to goto label. This patch adds a NULL-check to avoid it. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 3195c5f9784a ("drm/nouveau: set encoder for lvds") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Lyude Paul <lyude@redhat.com> [Fixed patch title] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512103320.82234-1-n.petrova@fintech.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21drm/nouveau/dp: check for NULL nv_connector->native_modeNatalia Petrova1-2/+2
[ Upstream commit 20a2ce87fbaf81e4c3dcb631d738e423959eb320 ] Add checking for NULL before calling nouveau_connector_detect_depth() in nouveau_connector_get_modes() function because nv_connector->native_mode could be dereferenced there since connector pointer passed to nouveau_connector_detect_depth() and the same value of nv_connector->native_mode is used there. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d4c2c99bdc83 ("drm/nouveau/dp: remove broken display depth function, use the improved one") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512111526.82408-1-n.petrova@fintech.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21drm/nouveau: don't detect DSM for non-NVIDIA deviceRatchanan Srirattanamet1-0/+3
[ Upstream commit 11d24327c2d7ad7f24fcc44fb00e1fa91ebf6525 ] The call site of nouveau_dsm_pci_probe() uses single set of output variables for all invocations. So, we must not write anything to them unless it's an NVIDIA device. Otherwise, if we are called with another device after the NVIDIA device, we'll clober the result of the NVIDIA device. For example, if the other device doesn't have _PR3 resources, the detection later would miss the presence of power resource support, and the rest of the code will keep using Optimus DSM, breaking power management for that machine. Also, because we're detecting NVIDIA's DSM, it doesn't make sense to run this detection on a non-NVIDIA device anyway. Thus, check at the beginning of the detection code if this is an NVIDIA card, and just return if it isn't. This, together with commit d22915d22ded ("drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED") developed independently and landed earlier, fixes runtime power management of the NVIDIA card in Lenovo Legion 5-15ARH05. Without this patch, the GPU resumption code will "timeout", sometimes hanging userspace. As a bonus, we'll also stop preventing _PR3 usage from the bridge for unrelated devices, which is always nice, I guess. Fixes: ccfc2d5cdb02 ("drm/nouveau: Use generic helper to check _PR3 presence") Signed-off-by: Ratchanan Srirattanamet <peathot@hotmail.com> Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/79 Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/DM6PR19MB2780805D4BE1E3F9B3AC96D0BC409@DM6PR19MB2780.namprd19.prod.outlook.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21igb: fix nvm.ops.read() error handlingAleksandr Loktionov1-0/+3
[ Upstream commit 48a821fd58837800750ec1b3962f0f799630a844 ] Add error handling into igb_set_eeprom() function, in case nvm.ops.read() fails just quit with error code asap. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21ipvlan: fix bound dev checking for IPv6 l3s modeHangbin Liu1-0/+4
[ Upstream commit ce57adc222aba32431c42632b396e9213d0eb0b8 ] The commit 59a0b022aa24 ("ipvlan: Make skb->skb_iif track skb->dev for l3s mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which is skb->skb_iif when there is no route. But for IPv6, the fix is not enough, because in ipv6_raw_deliver() -> raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part issue. Let's set IP6CB(skb)->iif to correct ifindex. BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6. Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21IB/isert: Fix incorrect release of isert connectionSaravanan Vajravel1-2/+0
[ Upstream commit 699826f4e30ab76a62c238c86fbef7e826639c8d ] The ib_isert module is releasing the isert connection both in isert_wait_conn() handler as well as isert_free_conn() handler. In isert_wait_conn() handler, it is expected to wait for iSCSI session logout operation to complete. It should free the isert connection only in isert_free_conn() handler. When a bunch of iSER target is cleared, this issue can lead to use-after-free memory issue as isert conn is twice released Fixes: b02efbfc9a05 ("iser-target: Fix implicit termination of connections") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/20230606102531.162967-4-saravanan.vajravel@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21IB/isert: Fix possible list corruption in CMA handlerSaravanan Vajravel1-0/+4
[ Upstream commit 7651e2d6c5b359a28c2d4c904fec6608d1021ca8 ] When ib_isert module receives connection error event, it is releasing the isert session and removes corresponding list node but it doesn't take appropriate mutex lock to remove the list node. This can lead to linked list corruption Fixes: bd3792205aae ("iser-target: Fix pending connections handling in target stack shutdown sequnce") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Link: https://lore.kernel.org/r/20230606102531.162967-3-saravanan.vajravel@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21IB/isert: Fix dead lock in ib_isertSaravanan Vajravel1-2/+8
[ Upstream commit 691b0480933f0ce88a81ed1d1a0aff340ff6293a ] - When a iSER session is released, ib_isert module is taking a mutex lock and releasing all pending connections. As part of this, ib_isert is destroying rdma cm_id. To destroy cm_id, rdma_cm module is sending CM events to CMA handler of ib_isert. This handler is taking same mutex lock. Hence it leads to deadlock between ib_isert & rdma_cm modules. - For fix, created local list of pending connections and release the connection outside of mutex lock. Calltrace: --------- [ 1229.791410] INFO: task kworker/10:1:642 blocked for more than 120 seconds. [ 1229.791416] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791418] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791419] task:kworker/10:1 state:D stack: 0 pid: 642 ppid: 2 flags:0x80004000 [ 1229.791424] Workqueue: ib_cm cm_work_handler [ib_cm] [ 1229.791436] Call Trace: [ 1229.791438] __schedule+0x2d1/0x830 [ 1229.791445] ? select_idle_sibling+0x23/0x6f0 [ 1229.791449] schedule+0x35/0xa0 [ 1229.791451] schedule_preempt_disabled+0xa/0x10 [ 1229.791453] __mutex_lock.isra.7+0x310/0x420 [ 1229.791456] ? select_task_rq_fair+0x351/0x990 [ 1229.791459] isert_cma_handler+0x224/0x330 [ib_isert] [ 1229.791463] ? ttwu_queue_wakelist+0x159/0x170 [ 1229.791466] cma_cm_event_handler+0x25/0xd0 [rdma_cm] [ 1229.791474] cma_ib_handler+0xa7/0x2e0 [rdma_cm] [ 1229.791478] cm_process_work+0x22/0xf0 [ib_cm] [ 1229.791483] cm_work_handler+0xf4/0xf30 [ib_cm] [ 1229.791487] ? move_linked_works+0x6e/0xa0 [ 1229.791490] process_one_work+0x1a7/0x360 [ 1229.791491] ? create_worker+0x1a0/0x1a0 [ 1229.791493] worker_thread+0x30/0x390 [ 1229.791494] ? create_worker+0x1a0/0x1a0 [ 1229.791495] kthread+0x10a/0x120 [ 1229.791497] ? set_kthread_struct+0x40/0x40 [ 1229.791499] ret_from_fork+0x1f/0x40 [ 1229.791739] INFO: task targetcli:28666 blocked for more than 120 seconds. [ 1229.791740] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791741] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791742] task:targetcli state:D stack: 0 pid:28666 ppid: 5510 flags:0x00004080 [ 1229.791743] Call Trace: [ 1229.791744] __schedule+0x2d1/0x830 [ 1229.791746] schedule+0x35/0xa0 [ 1229.791748] schedule_preempt_disabled+0xa/0x10 [ 1229.791749] __mutex_lock.isra.7+0x310/0x420 [ 1229.791751] rdma_destroy_id+0x15/0x20 [rdma_cm] [ 1229.791755] isert_connect_release+0x115/0x130 [ib_isert] [ 1229.791757] isert_free_np+0x87/0x140 [ib_isert] [ 1229.791761] iscsit_del_np+0x74/0x120 [iscsi_target_mod] [ 1229.791776] lio_target_np_driver_store+0xe9/0x140 [iscsi_target_mod] [ 1229.791784] configfs_write_file+0xb2/0x110 [ 1229.791788] vfs_write+0xa5/0x1a0 [ 1229.791792] ksys_write+0x4f/0xb0 [ 1229.791794] do_syscall_64+0x5b/0x1a0 [ 1229.791798] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: bd3792205aae ("iser-target: Fix pending connections handling in target stack shutdown sequnce") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Link: https://lore.kernel.org/r/20230606102531.162967-2-saravanan.vajravel@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21IB/uverbs: Fix to consider event queue closing also upon non-blocking modeYishai Hadas1-7/+5
[ Upstream commit 62fab312fa1683e812e605db20d4f22de3e3fb2f ] Fix ib_uverbs_event_read() to consider event queue closing also upon non-blocking mode. Once the queue is closed (e.g. hot-plug flow) all the existing events are cleaned-up as part of ib_uverbs_free_event_queue(). An application that uses the non-blocking FD mode should get -EIO in that case to let it knows that the device was removed already. Otherwise, it can loose the indication that the device was removed and won't recover. As part of that, refactor the code to have a single flow with regards to 'is_closed' for both blocking and non-blocking modes. Fixes: 14e23bd6d221 ("RDMA/core: Fix locking in ib_uverbs_event_read") Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/97b00116a1e1e13f8dc4ec38a5ea81cf8c030210.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21RDMA/cma: Always set static rate to 0 for RoCEMark Zhang1-2/+2
[ Upstream commit 58030c76cce473b6cfd630bbecb97215def0dff8 ] Set static rate to 0 as it should be discovered by path query and has no meaning for RoCE. This also avoid of using the rtnl lock and ethtool API, which is a bottleneck when try to setup many rdma-cm connections at the same time, especially with multiple processes. Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/f72a4f8b667b803aee9fa794069f61afb5839ce4.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functionsMaher Sanalla1-0/+3
[ Upstream commit ee4d269eccfea6c17b18281bef482700d898e86f ] Delay drop data is initiated for PFs that have the capability of rq_delay_drop and are in roce profile. However, PFs with RAW ethernet profile do not initiate delay drop data on function load, causing kernel panic if delay drop struct members are accessed later on in case a dropless RQ is created. Thus, stage the delay drop initialization as part of RAW ethernet PF loading process. Fixes: b5ca15ad7e61 ("IB/mlx5: Add proper representors support") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Link: https://lore.kernel.org/r/2e9d386785043d48c38711826eb910315c1de141.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21octeontx2-af: fixed resource availability checkSatha Rao1-1/+2
[ Upstream commit 4e635f9d86165e47f5440196f2ebdb258efb8341 ] txschq_alloc response have two different arrays to store continuous and non-continuous schedulers of each level. Requested count should be checked for each array separately. Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Satha Rao <skoteshwar@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21iavf: remove mask from iavf_irq_enable_queues()Ahmed Zaki3-11/+8
[ Upstream commit c37cf54c12cfaa51e7aaf88708167b0d3259e64e ] Enable more than 32 IRQs by removing the u32 bit mask in iavf_irq_enable_queues(). There is no need for the mask as there are no callers that select individual IRQs through the bitmask. Also, if the PF allocates more than 32 IRQs, this mask will prevent us from using all of them. Modify the comment in iavf_register.h to show that the maximum number allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1]. link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21RDMA/rxe: Fix the use-before-initialization error of resp_pktsZhu Yanjun1-4/+3
[ Upstream commit 2a62b6210ce876c596086ab8fd4c8a0c3d10611a ] In the following: Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 assign_lock_key kernel/locking/lockdep.c:982 [inline] register_lock_class+0xdb6/0x1120 kernel/locking/lockdep.c:1295 __lock_acquire+0x10a/0x5df0 kernel/locking/lockdep.c:4951 lock_acquire kernel/locking/lockdep.c:5691 [inline] lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5656 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162 skb_dequeue+0x20/0x180 net/core/skbuff.c:3639 drain_resp_pkts drivers/infiniband/sw/rxe/rxe_comp.c:555 [inline] rxe_completer+0x250d/0x3cc0 drivers/infiniband/sw/rxe/rxe_comp.c:652 rxe_qp_do_cleanup+0x1be/0x820 drivers/infiniband/sw/rxe/rxe_qp.c:761 execute_in_process_context+0x3b/0x150 kernel/workqueue.c:3473 __rxe_cleanup+0x21e/0x370 drivers/infiniband/sw/rxe/rxe_pool.c:233 rxe_create_qp+0x3f6/0x5f0 drivers/infiniband/sw/rxe/rxe_verbs.c:583 This is a use-before-initialization problem. It happens because rxe_qp_do_cleanup is called during error unwind before the struct has been fully initialized. Move the initialization of the skb earlier. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20230602035408.741534-1-yanjun.zhu@intel.com Reported-by: syzbot+eba589d8f49c73d356da@syzkaller.appspotmail.com Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21RDMA/rxe: Removed unused name from rxe_task structBob Pearson3-12/+5
[ Upstream commit de669ae8af49ceed0eed44f5b3d51dc62affc5e4 ] The name field in struct rxe_task is never used. This patch removes it. Link: https://lore.kernel.org/r/20221021200118.2163-4-rpearsonhpe@gmail.com Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com> Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Stable-dep-of: 2a62b6210ce8 ("RDMA/rxe: Fix the use-before-initialization error of resp_pkts") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21RDMA/rxe: Remove the unused variable objZhu Yanjun3-7/+5
[ Upstream commit f07853582d1f6ed282f8d9a0b1209a87dd761f58 ] The member variable obj in struct rxe_task is not needed. So remove it to save memory. Link: https://lore.kernel.org/r/20220822011615.805603-4-yanjun.zhu@linux.dev Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Stable-dep-of: 2a62b6210ce8 ("RDMA/rxe: Fix the use-before-initialization error of resp_pkts") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21net: enetc: correct the indexes of highest and 2nd highest TCsWei Fang1-2/+2
[ Upstream commit 21225873be1472b7c59ed3650396af0e40578112 ] For ENETC hardware, the TCs are numbered from 0 to N-1, where N is the number of TCs. Numerically higher TC has higher priority. It's obvious that the highest priority TC index should be N-1 and the 2nd highest priority TC index should be N-2. However, the previous logic uses netdev_get_prio_tc_map() to get the indexes of highest priority and 2nd highest priority TCs, it does not make sense and is incorrect to give a "tc" argument to netdev_get_prio_tc_map(). So the driver may get the wrong indexes of the two highest priotiry TCs which would lead to failed to set the CBS for the two highest priotiry TCs. e.g. $ tc qdisc add dev eno0 parent root handle 100: mqprio num_tc 6 \ map 0 0 1 1 2 3 4 5 queues 1@0 1@1 1@2 1@3 2@4 2@6 hw 1 $ tc qdisc replace dev eno0 parent 100:6 cbs idleslope 100000 \ sendslope -900000 hicredit 12 locredit -113 offload 1 $ Error: Specified device failed to setup cbs hardware offload. ^^^^^ In this example, the previous logic deems the indexes of the two highest priotiry TCs should be 3 and 2. Actually, the indexes are 5 and 4, because the number of TCs is 6. So it would be failed to configure the CBS for the two highest priority TCs. Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21spi: fsl-dspi: avoid SCK glitches with continuous transfersVladimir Oltean1-0/+15
[ Upstream commit c5c31fb71f16ba75bad4ade208abbae225305b65 ] The DSPI controller has configurable timing for (a) tCSC: the interval between the assertion of the chip select and the first clock edge (b) tASC: the interval between the last clock edge and the deassertion of the chip select What is a bit surprising, but is documented in the figure "Example of continuous transfer (CPHA=1, CONT=1)" in the datasheet, is that when the chip select stays asserted between multiple TX FIFO writes, the tCSC and tASC times still apply. With CONT=1, chip select remains asserted, but SCK takes a break and goes to the idle state for tASC + tCSC ns. In other words, the default values (of 0 and 0 ns) result in SCK glitches where the SCK transition to the idle state, as well as the SCK transition from the idle state, will have no delay in between, and it may appear that a SCK cycle has simply gone missing. The resulting timing violation might cause data corruption in many peripherals, as their chip select is asserted. The driver has device tree bindings for tCSC ("fsl,spi-cs-sck-delay") and tASC ("fsl,spi-sck-cs-delay"), but these are only specified to apply when the chip select toggles in the first place, and this timing characteristic depends on each peripheral. Many peripherals do not have explicit timing requirements, so many device trees do not have these properties present at all. Nonetheless, the lack of SCK glitches is a common sense requirement, and since the SCK stays in the idle state during transfers for tCSC+tASC ns, and that in itself should look like half a cycle, then let's ensure that tCSC and tASC are at least a quarter of a SCK period, such that their sum is at least half of one. Fixes: 95bf15f38641 ("spi: fsl-dspi: Add ~50ns delay between cs and sck") Reported-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com> Debugged-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com> Tested-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230529223402.1199503-1-vladimir.oltean@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21RDMA/rtrs: Fix the last iu->buf leak in err pathLi Zhijian1-1/+3
[ Upstream commit 3bf3a7c6985c625f64e73baefdaa36f1c2045a29 ] The last iu->buf will leak if ib_dma_mapping_error() fails. Fixes: c0894b3ea69d ("RDMA/rtrs: core: lib functions shared between client and server modules") Link: https://lore.kernel.org/r/1682384563-2-3-git-send-email-lizhijian@fujitsu.com Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21usb: dwc3: gadget: Reset num TRBs before giving back the requestElson Roy Serrao1-0/+1
commit 00f8205ffcf112dcef14f8151d78075d38d22c08 upstream. Consider a scenario where cable disconnect happens when there is an active usb reqest queued to the UDC. As part of the disconnect we would issue an end transfer with no interrupt-on-completion before giving back this request. Since we are giving back the request without skipping TRBs the num_trbs field of dwc3_request still holds the stale value previously used. Function drivers re-use same request for a given bind-unbind session and hence their dwc3_request context gets preserved across cable disconnect/connect. When such a request gets re-queued after cable connect, we would increase the num_trbs field on top of the previous stale value thus incorrectly representing the number of TRBs used. Fix this by resetting num_trbs field before giving back the request. Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Message-ID: <1685654850-8468-1-git-send-email-quic_eserrao@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21serial: lantiq: add missing interrupt ackBernhard Seibold1-0/+1
commit 306320034e8fbe7ee1cc4f5269c55658b4612048 upstream. Currently, the error interrupt is never acknowledged, so once active it will stay active indefinitely, causing the handler to be called in an infinite loop. Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.") Cc: <stable@vger.kernel.org> Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21USB: serial: option: add Quectel EM061KGL seriesJerry Meng1-0/+16
commit f1832e2b5e498e258b090af3b065b85cf8cc5161 upstream. Add support for Quectel EM061KGL series which are based on Qualcomm SDX12 chip: EM061KGL_LTA(0x2c7c / 0x0123): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LMS(0x2c7c / 0x0124): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LWW(0x2c7c / 0x6008): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LCN(0x2c7c / 0x6009): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL Above products use the exact same interface layout and option driver is for interfaces DIAG, NMEA and AT. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6008 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM061K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng <jerry-meng@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21net: usb: qmi_wwan: add support for Compal RXM-G1Wes Huang1-0/+2
commit 863199199713908afaa47ba09332b87621c12496 upstream. Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip. This patch adds support for two compositions: 0x9091: DIAG + MODEM + QMI_RMNET + ADB 0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=9091 Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=90db Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Wes Huang <wes.huang@moxa.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21RDMA/uverbs: Restrict usage of privileged QKEYsEdward Srouji1-1/+6
commit 0cadb4db79e1d9eea66711c4031e435c2191907e upstream. According to the IB specification rel-1.6, section 3.5.3: "QKEYs with the most significant bit set are considered controlled QKEYs, and a HCA does not allow a consumer to arbitrarily specify a controlled QKEY." Thus, block non-privileged users from setting such a QKEY. Cc: stable@vger.kernel.org Fixes: bc38a6abdd5a ("[PATCH] IB uverbs: core implementation") Signed-off-by: Edward Srouji <edwards@nvidia.com> Link: https://lore.kernel.org/r/c00c809ddafaaf87d6f6cb827978670989a511b3.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21nouveau: fix client work fence deletion raceDave Airlie1-4/+10
commit c8a5d5ea3ba6a18958f8d76430e4cd68eea33943 upstream. This seems to have existed for ever but is now more apparant after commit 9bff18d13473 ("drm/ttm: use per BO cleanup workers") My analysis: two threads are running, one in the irq signalling the fence, in dma_fence_signal_timestamp_locked, it has done the DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the callbacks. The second thread in nouveau_cli_work_ready, where it sees the fence is signalled, so then puts the fence, cleanups the object and frees the work item, which contains the callback. Thread one goes again and tries to call the callback and causes the use-after-free. Proposed fix: lock the fence signalled check in nouveau_cli_work_ready, so either the callbacks are done or the memory is freed. Reviewed-by: Karol Herbst <kherbst@redhat.com> Fixes: 11e451e74050 ("drm/nouveau: remove fence wait code from deferred client work handler") Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21irqchip/gic: Correctly validate OF quirk descriptorsMarc Zyngier1-0/+2
[ Upstream commit 91539341a3b6e9c868024a4292455dae36e6f58c ] When checking for OF quirks, make sure either 'compatible' or 'property' is set, and give up otherwise. This avoids non-OF quirks being randomly applied as they don't have any of the OF data that need checking. Cc: Douglas Anderson <dianders@chromium.org> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21drm:amd:amdgpu: Fix missing buffer object unlock in failure pathSukrut Bellary2-2/+6
[ Upstream commit 60ecaaf54886b0642d5c4744f7fbf1ff0d6b3e42 ] smatch warning - 1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. 2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21xen/blkfront: Only check REQ_FUA for writesRoss Lagerwall1-1/+2
[ Upstream commit b6ebaa8100090092aa602530d7e8316816d0c98d ] The existing code silently converts read operations with the REQ_FUA bit set into write-barrier operations. This results in data loss as the backend scribbles zeroes over the data instead of returning it. While the REQ_FUA bit doesn't make sense on a read operation, at least one well-known out-of-tree kernel module does set it and since it results in data loss, let's be safe here and only look at REQ_FUA for writes. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21parisc: Flush gatt writes and adjust gatt mask in parisc_agp_mask_memory()Helge Deller1-1/+14
[ Upstream commit d703797380c540bbeac03f104ebcfc364eaf47cc ] Flush caches after changing gatt entries and calculate entry according to SBA requirements. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: Fix logic checking if system is running from batteryMario Limonciello1-2/+6
[ Upstream commit 95339f40a8b652b5b1773def31e63fc53c26378a ] The logic used for power_supply_is_system_supplied() counts all power supplies and assumes that the system is running from AC if there is either a non-battery power-supply reporting to be online or if no power-supplies exist at all. The second rule is for desktop systems, that don't have any battery/charger devices. These systems will incorrectly report to be powered from battery once a device scope power-supply is registered (e.g. a HID device), since these power-supplies increase the counter. Apart from HID devices, recent dGPUs provide UCSI power supplies on a desktop systems. The dGPU by default doesn't have anything plugged in so it's 'offline'. This makes power_supply_is_system_supplied() return 0 with a count of 1 meaning all drivers that use this get a wrong judgement. To fix this case adjust the logic to also examine the scope of the power supply. If the power supply is deemed a device power supply, then don't count it. Cc: Evan Quan <Evan.Quan@amd.com> Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issuesDouglas Anderson3-2/+27
[ Upstream commit 44bd78dd2b8897f59b7e3963f088caadb7e4f047 ] Some Chromebooks with Mediatek SoCs have a problem where the firmware doesn't properly save/restore certain GICR registers. Newer Chromebooks should fix this issue and we may be able to do firmware updates for old Chromebooks. At the moment, the only known issue with these Chromebooks is that we can't enable "pseudo NMIs" since the priority register can be lost. Enabling "pseudo NMIs" on Chromebooks with the problematic firmware causes crashes and freezes. Let's detect devices with this problem and then disable "pseudo NMIs" on them. We'll detect the problem by looking for the presence of the "mediatek,broken-save-restore-fw" property in the GIC device tree node. Any devices with fixed firmware will not have this property. Our detection plan works because we never bake a Chromebook's device tree into firmware. Instead, device trees are always bundled with the kernel. We'll update the device trees of all affected Chromebooks and then we'll never enable "pseudo NMI" on a kernel that is bundled with old device trees. When a firmware update is shipped that fixes this issue it will know to patch the device tree to remove the property. In order to make this work, the quick detection mechanism of the GICv3 code is extended to be able to look for properties in addition to looking at "compatible". Reviewed-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230515131353.v2.2.I88dc0a0eb1d9d537de61604cd8994ecc55c0cac1@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21regulator: Fix error checking for debugfs_create_dirOsama Muhammad1-2/+2
[ Upstream commit 2bf1c45be3b8f3a3f898d0756c1282f09719debd ] This patch fixes the error checking in core.c in debugfs_create_dir. The correct way to check if an error occurred is 'IS_ERR' inline function. Signed-off-by: Osama Muhammad <osmtendev@gmail.com Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com Link: https://lore.kernel.org/r/20230515172938.13338-1-osmtendev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0Alexandru Sorodoc1-0/+2
[ Upstream commit 362c1f2ec82cb65940e1c73e15a395a7a891fc6f ] On ASUS GU604V the key 0x7B is issued when the charger is connected or disconnected, and key 0xC0 is issued when an external display is connected or disconnected. This commit maps them to KE_IGNORE to slience kernel messages about unknown keys, such as: kernel: asus_wmi: Unknown key code 0x7b Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com> Link: https://lore.kernel.org/r/20230512101517.47416-1-ealex95@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: Ratelimit no data debug outputMarek Vasut1-1/+2
[ Upstream commit 155c45a25679f571c2ae57d10db843a9dfc63430 ] Reduce the amount of output this dev_dbg() statement emits into logs, otherwise if system software polls the sysfs entry for data and keeps getting -ENODATA, it could end up filling the logs up. This does in fact make systemd journald choke, since during boot the sysfs power supply entries are polled and if journald starts at the same time, the journal is just being repeatedly filled up, and the system stops on trying to start journald without booting any further. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()Hans de Goede1-4/+2
[ Upstream commit 59dddea9879713423c7b2ade43c423bb71e0d216 ] Use mod_delayed_work() instead of separate cancel_delayed_work_sync() + schedule_delayed_work() calls. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: sc27xx: Fix external_power_changed raceHans de Goede1-8/+1
[ Upstream commit 4d5c129d6c8993fe96e9ae712141eedcb9ca68c2 ] sc27xx_fgu_external_power_changed() dereferences data->battery, which gets sets in ab8500_btemp_probe() like this: data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc, &fgu_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where sc27xx_fgu_external_power_changed() may get called while data->battery has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in data->battery, so sc27xx_fgu_external_power_changed() can simply directly use the passed in psy argument which is always valid. After this change sc27xx_fgu_external_power_changed() is reduced to just "power_supply_changed(psy);" and it has the same prototype. While at it simply replace it with making the external_power_changed callback directly point to power_supply_changed. Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: ab8500: Fix external_power_changed raceHans de Goede2-8/+4
[ Upstream commit a5299ce4e96f3e8930e9c051b28d8093ada87b08 ] ab8500_btemp_external_power_changed() dereferences di->btemp_psy, which gets sets in ab8500_btemp_probe() like this: di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where ab8500_btemp_external_power_changed() may get called while di->btemp_psy has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in di->btemp_psy, so ab8500_btemp_external_power_changed() can simply directly use the passed in psy argument which is always valid. And the same applies to ab8500_fg_external_power_changed(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14Revert "staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICE"Greg Kroah-Hartman2-3/+8
This reverts commit bb1313f37e7b267fcf0fe475b974be8de5f39945 which is commit fda2093860df4812d69052a8cf4997e53853a340 upstream. Ben reports that this should not have been backported to the older kernels as the rest of the macro is not empty. It was a clean-up patch in 6.4-rc1 only, it did not add new device ids. Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/r/aa0d401a7f63448cd4c2fe4a2d7e8495d9aa123e.camel@decadent.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14drm/atomic: Don't pollute crtc_state->mode_blob with error pointersVille Syrjälä1-6/+8
commit 439cf34c8e0a8a33d8c15a31be1b7423426bc765 upstream. Make sure we don't assign an error pointer to crtc_state->mode_blob as that will break all kinds of places that assume either NULL or a valid pointer (eg. drm_property_blob_put()). Cc: stable@vger.kernel.org Reported-by: fuyufan <fuyufan@huawei.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-1-ville.syrjala@linux.intel.com Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14vhost: support PACKED when setting-getting vring_baseShannon Nelson2-7/+19
[ Upstream commit 55d8122f5cd62d5aaa225d7167dcd14a44c850b9 ] Use the right structs for PACKED or split vqs when setting and getting the vring base. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230424225031.18947-3-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14eeprom: at24: also select REGMAPRandy Dunlap1-0/+1
[ Upstream commit 7f3c782b3914e510b646a77aedc3adeac2e4a63b ] Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors, so also select REGMAP to prevent the build errors. ../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration 540 | struct regmap_config *regmap_config) ../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client': ../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c: In function 'at24_probe': ../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable] Fixes: 5c015258478e ("eeprom: at24: add basic regmap_i2c support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14i2c: sprd: Delete i2c adapter in .remove's error pathUwe Kleine-König1-3/+5
[ Upstream commit ca0aa17f2db3468fd017038d23a78e17388e2f67 ] If pm runtime resume fails the .remove callback used to exit early. This resulted in an error message by the driver core but the device gets removed anyhow. This lets the registered i2c adapter stay around with an unbound parent device. So only skip clk disabling if resume failed, but do delete the adapter. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14staging: vc04_services: fix gcc-13 build warningGreg Kroah-Hartman1-2/+2
Not upstream as newer kernels fixed this properly. Fix up a mismatched function prototype warning in the vc04_services driver that gcc-13 shows. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 21:49:28 +0300