summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-01-24rtlwifi: Standardize RT_PRINT_DATA macro and usesJoe Perches12-26/+23
Use a single printk(KERN_DEBUG to emit the header line to avoid any possible output interleaving. Remove unnecessary parentheses from the calling uses. Standardize header arg without trailing \n or colon. Fix a few pairwiase/pairwise typos. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Neaten RT_ASSERT, RT_TRACE, RTPRINT, RT_PRINT_DATA macrosJoe Perches5-53/+47
Make the macros a bit more readable. Use do {...} while (0) without terminating semicolons. Add missing terminating semicolon to a few uses. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: trivial: change save&rest order in RSSI pollingRafał Miłecki1-8/+8
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: implement RSSI calibration for rev3+Rafał Miłecki1-6/+187
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: make ethtool_ops constStephen Hemminger1-2/+2
All usage of ethtool_ops should be const; also add comma at end of initializer list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: upload PAPD PGA gain delta tableRafał Miłecki3-6/+12
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: fix typos in RF controlRafał Miłecki2-6/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: add helper for getting gain tableRafał Miłecki3-94/+64
Also move the code to tables file. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: implement TX power control setupRafał Miłecki2-1/+217
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: add maskset helpersRafał Miłecki3-57/+36
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24bcma: SPROM: extract power info for coresRafał Miłecki1-1/+39
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24bcma: SPROM: add macro for easier extractionRafał Miłecki1-68/+71
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24ssb: SPROM: extract each core power infoRafał Miłecki1-1/+39
We already extract some basic info but it's incomplete, reads info about the first core only. Used data structure doesn't allow easy adding of more cores. This patch adds new struct and array for storing power info. The plan is to: switch all extractors (including the ones using NVRAM) to new struct, switch drivers, then deprecate and finally drop old SSB fields. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18tg3: Fix single-vector MSI-X codeMatt Carlson1-13/+14
Kdump kernels leave MSI-X interrupts (as setup by the crashed kernel) enabled. However, kdump only enables one CPU in the new environment, thus causing tg3 to abort MSI-X setup. When the driver attempts to enable INTA or MSI interrupt modes on a kdump kernel, interrupt delivery fails. This patch attempts to workaround the problem by forcing the driver to enable a single MSI-X interrupt. In such a configuration, the device's multivector interrupt mode must be disabled. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17Merge branch 'master' of ↵David S. Miller12-92/+71
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-01-17bnx2x: Disable AN KR work-around for BCM57810Yaniv Rosner1-1/+9
Disable the work-around for the autoneg KR of the BCM57810 in case the Warpcore version is 0xD108 and above, which fixes this problem. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Remove AutoGrEEEn for BCM84833Yaniv Rosner1-6/+2
Disable the autoGrEEEn feature for BCM84833. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Remove 100Mb force speed for BCM84833Yaniv Rosner2-6/+21
Remove unsupported speed of 100Mb force for BCM84833 due to hardware limitation. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Fix PFC setting on BCM57840Yaniv Rosner2-10/+13
This patch handles the second port of a path in a 4-port device of BCM57840. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Fix Super-Isolate mode for BCM84833Yaniv Rosner1-113/+137
The Super-Isolate mode comes to isolate the BCM84833 PHY from the outside world. Not doing it correctly, made link partner see the link before the driver was loaded. This patch also involves SPIROM version fixes since it is used to determine whether the common init of the PHY was already executed, and the common init of this PHY is partially responsible for setting the Super-Isolate mode. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17net: sh-eth: Fix build error by the value which is not definedNobuhiro Iwamatsu1-1/+1
----- drivers/net/ethernet/renesas/sh_eth.c:1706: error: 'pdid' undeclared (first use in this function) drivers/net/ethernet/renesas/sh_eth.c:1706: error: (Each undeclared identifier is reported only once drivers/net/ethernet/renesas/sh_eth.c:1706: error: for each function it appears in.) make[5]: *** [drivers/net/ethernet/renesas/sh_eth.o] Error 1 ----- Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17mwl8k: Fixing Sparse ENDIAN CHECK warningYogesh Ashok Powar1-1/+1
Fixing following sparse warning >drivers/net/wireless/mwl8k.c:2780:15: warning: incorrect type in assignment (different base types) >drivers/net/wireless/mwl8k.c:2780:15: expected restricted unsigned short [usertype] channel >drivers/net/wireless/mwl8k.c:2780:15: got unsigned short [unsigned] [usertype] hw_value Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17mwl8k: fix condition in mwl8k_cmd_encryption_remove_key()Dan Carpenter1-1/+1
The intent here was to check whether key->cipher was WEP40 or WEP104. We do a similar check correctly in several other places in this file. The current condition is always true. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17brcmfmac: work-around gcc 4.7 build issueAlexandre Oliva1-1/+1
Alexandre Oliva <oliva@lsd.ic.unicamp.br> says: "It's an issue brought about by GCC 4.7's partial-inlining, that ends up splitting the udelay function just at the wrong spot, in such a way that some sanity checks for constants fails, and we end up calling bad_udelay. This patch fixes the problem. Feel free to push it upstream if it makes sense to you." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17ehea: make some functions and variables staticThadeu Lima de Souza Cascardo3-25/+23
Some functions and variables in ehea are only used in their own file, so they should be static. One particular function had a very generic name, print_error_data. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17brcmsmac: remove PCI suspend/resume from bcma driverLinus Torvalds1-35/+3
The brcmsmac driver isn't a PCI driver any more, it's a bcma one. The PCI device has been resumed by the PCI driver (the generic PCI layer, really), we should be resuming just our own driver state. Also add pr_debug() calls to show that we now actually get the suspend/resume events. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17bcma: connect the bcma bus suspend/resume to the bcma driver suspend/resumeLinus Torvalds2-1/+20
Now the low-level driver actually gets informed that it is getting suspended and resumed. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17bcma: add stub for bcma_bus_suspend()Linus Torvalds3-1/+7
.. and connect it up with the pci host bcma driver. Now, the next step is to connect those bcma bus-level suspend/resume functions to the actual bcma device suspend resume functions. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17bcma: convert suspend/resume to pm_opsLinus Torvalds1-26/+16
.. and avoid doing the unnecessary PCI operations - the PCI layer will do them for us. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17wireless: iwlwifi: iwl-scan.c: Fix build warningFabio Estevam1-1/+1
Fix the following build warning: drivers/net/wireless/iwlwifi/iwl-scan.c: In function ‘iwlagn_request_scan’: drivers/net/wireless/iwlwifi/iwl-scan.c:572: warning: ‘cmd_len’ may be used uninitialized in this function Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17ath9k_hw: fix interpretation of the rx KeyMiss flagFelix Fietkau2-4/+6
Documentation states that the KeyMiss flag is only valid if RxFrameOK is unset, however empirical evidence has shown that this is false. When KeyMiss is set (and RxFrameOK is 1), the hardware passes a valid frame which has not been decrypted. The driver then falsely marks the frame as decrypted, and when using CCMP this corrupts the rx CCMP PN, leading to connection hangs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17bcma: invalidate the mapped core over suspend/resumeRafał Miłecki1-0/+3
This clears the currently mapped core when suspending, to force re-mapping after resume. Without that we were touching default core registers believing some other core is mapped. Such a behaviour resulted in lockups on some machines. Cc: stable@vger.kernel.org Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13rt2800pci: fix spurious interrupts generationStanislaw Gruszka1-20/+8
Same devices can generate interrupt without properly setting bit in INT_SOURCE_CSR register (spurious interrupt), what will cause IRQ line will be disabled by interrupts controller driver. We discovered that clearing INT_MASK_CSR stops such behaviour. We previously first read that register, and then clear all know interrupt sources bits and do not touch reserved bits. After this patch, we write to all register content (I believe writing to reserved bits on that register will not cause any problems, I tested that on my rt2800pci device). This fix very bad performance problem, practically making device unusable (since worked without interrupts), reported in: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We previously tried to workaround that issue in commit 4ba7d9997869d25bd223dea7536fc1ce9fab3b3b "rt2800pci: handle spurious interrupts", but it was reverted in commit 82e5fc2a34fa9ffea38f00c4066b7e600a0ca5e6 as thing, that will prevent to detect real spurious interrupts. Reported-and-tested-by: Amir Hedayaty <hedayaty@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13ipw2x00: signedness bug handling frame lengthDan Carpenter1-2/+2
This is basically just a cleanup. Large positive numbers get counted as negative but then get implicitly cast to positive again for the checks that matter. This does make a small difference in ipw_handle_promiscuous_rx() when we test "if (unlikely((len + IPW_RX_FRAME_SIZE) > skb_tailroom(rxb->skb)))" It should return there, but we don't return until a couple lines later when we test "if (len > IPW_RX_BUF_SIZE - sizeof(struct ipw_rt_hdr)) {". The difference is that in the second test the sizeof() means that there is an implied cast to unsigned. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13wireless: b43: fix Oops on card eject during transferGuennadi Liakhovetski1-1/+4
An Oops has once been observed, when the SDIO card had been ejected during IO. The PC value shows, that the dev pointer in b43_op_stop() was NULL. (I moved the NULL check before the lock, based upon a suggestion from Julian Calaby <julian.calaby@gmail.com>. -- JWL) Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13vhost-net: add module alias (v2.1)stephen hemminger1-3/+5
By adding some module aliases, programs (or users) won't have to explicitly call modprobe. Vhost-net will always be available if built into the kernel. It does require assigning a permanent minor number for depmod to work. Also: - use C99 style initialization. - add missing entry in documentation for loop-control Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-13Merge branch 'akpm' (aka "Andrew's patch-bomb, take two")Linus Torvalds5-22/+32
Andrew explains: - various misc stuff - Most of the rest of MM: memcg, threaded hugepages, others. - cpumask - kexec - kdump - some direct-io performance tweaking - radix-tree optimisations - new selftests code A note on this: often people will develop a new userspace-visible feature and will develop userspace code to exercise/test that feature. Then they merge the patch and the selftest code dies. Sometimes we paste it into the changelog. Sometimes the code gets thrown into Documentation/(!). This saddens me. So this patch creates a bare-bones framework which will henceforth allow me to ask people to include their test apps in the kernel tree so we can keep them alive. Then when people enhance or fix the feature, I can ask them to update the test app too. The infrastruture is terribly trivial at present - let's see how it evolves. - checkpoint/restart feature work. A note on this: this is a project by various mad Russians to perform c/r mainly from userspace, with various oddball helper code added into the kernel where the need is demonstrated. So rather than some large central lump of code, what we have is little bits and pieces popping up in various places which either expose something new or which permit something which is normally kernel-private to be modified. The overall project is an ongoing thing. I've judged that the size and scope of the thing means that we're more likely to be successful with it if we integrate the support into mainline piecemeal rather than allowing it all to develop out-of-tree. However I'm less confident than the developers that it will all eventually work! So what I'm asking them to do is to wrap each piece of new code inside CONFIG_CHECKPOINT_RESTORE. So if it all eventually comes to tears and the project as a whole fails, it should be a simple matter to go through and delete all trace of it. This lot pretty much wraps up the -rc1 merge for me. * akpm: (96 commits) unlzo: fix input buffer free ramoops: update parameters only after successful init ramoops: fix use of rounddown_pow_of_two() c/r: prctl: add PR_SET_MM codes to set up mm_struct entries c/r: procfs: add start_data, end_data, start_brk members to /proc/$pid/stat v4 c/r: introduce CHECKPOINT_RESTORE symbol selftests: new x86 breakpoints selftest selftests: new very basic kernel selftests directory radix_tree: take radix_tree_path off stack radix_tree: remove radix_tree_indirect_to_ptr() dio: optimize cache misses in the submission path vfs: cache request_queue in struct block_device fs/direct-io.c: calculate fs_count correctly in get_more_blocks() drivers/parport/parport_pc.c: fix warnings panic: don't print redundant backtraces on oops sysctl: add the kernel.ns_last_pid control kdump: add udev events for memory online/offline include/linux/crash_dump.h needs elf.h kdump: fix crash_kexec()/smp_send_stop() race in panic() kdump: crashk_res init check for /sys/kernel/kexec_crash_size ...
2012-01-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds43-395/+577
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) pptp: Accept packet with seq zero RDS: Remove some unused iWARP code net: fsl: fec: handle 10Mbps speed in RMII mode drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c: add missing iounmap drivers/net/ethernet/tundra/tsi108_eth.c: add missing iounmap ksz884x: fix mtu for VLAN net_sched: sfq: add optional RED on top of SFQ dp83640: Fix NOHZ local_softirq_pending 08 warning gianfar: Fix invalid TX frames returned on error queue when time stamping gianfar: Fix missing sock reference when processing TX time stamps phylib: introduce mdiobus_alloc_size() net: decrement memcg jump label when limit, not usage, is changed net: reintroduce missing rcu_assign_pointer() calls inet_diag: Rename inet_diag_req_compat into inet_diag_req inet_diag: Rename inet_diag_req into inet_diag_req_v2 bond_alb: don't disable softirq under bond_alb_xmit mac80211: fix rx->key NULL pointer dereference in promiscuous mode nl80211: fix old station flags compatibility mdio-octeon: use an unique MDIO bus name. mdio-gpio: use an unique MDIO bus name. ...
2012-01-13ramoops: update parameters only after successful initKees Cook1-8/+9
If a platform device exists on the system, but ramoops fails to attach to it, the module parameters are overridden before ramoops can fall back and try to use passed module parameters. Move update to end of init routine. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Sergiu Iordache <sergiu@chromium.org> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13ramoops: fix use of rounddown_pow_of_two()Marco Stornelli1-2/+2
The return value of rounddown_pow_of_two wasn't evaluated, so the operation was a no-op. Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Reported-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13drivers/parport/parport_pc.c: fix warningsAndrew Morton1-2/+2
drivers/parport/parport_pc.c: In function '__check_irq': drivers/parport/parport_pc.c:3415: warning: return from incompatible pointer type drivers/parport/parport_pc.c: In function '__check_dma': drivers/parport/parport_pc.c:3417: warning: return from incompatible pointer type Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13kdump: add udev events for memory online/offlineMichael Holzheu1-3/+14
Currently no udev events for memory hotplug "online" and "offline" are generated: # udevadm monitor # echo offline > /sys/devices/system/memory/memory4/state ==> No event When kdump is loaded, kexec detects the current memory configuration and stores it in the pre-allocated ELF core header. Therefore, for kdump it is necessary to reload the kdump kernel with kexec when the memory configuration changes (e.g. for online/offline hotplug memory). In order to do this automatically, udev rules should be used. This kernel patch adds udev events for "online" and "offline". Together with this kernel patch, the following udev rules for online/offline have to be added to "/etc/udev/rules.d/98-kexec.rules": SUBSYSTEM=="memory", ACTION=="online", PROGRAM="/etc/init.d/kdump restart" SUBSYSTEM=="memory", ACTION=="offline", PROGRAM="/etc/init.d/kdump restart" [sfr@canb.auug.org.au: fixups for class to subsystem conversion] Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13kexec: remove KMSG_DUMP_KEXECWANG Cong2-4/+2
KMSG_DUMP_KEXEC is useless because we already save kernel messages inside /proc/vmcore, and it is unsafe to allow modules to do other stuffs in a crash dump scenario. [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Reported-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13drivers/video/nvidia/nvidia.c: fix warningAndrew Morton1-3/+3
Fix the int/bool confusion in there. drivers/video/nvidia/nvidia.c:1602: warning: return from incompatible pointer type Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13pptp: Accept packet with seq zeroBradley Peterson1-2/+2
Initialize the PPTP "seq received" value to 0xffffffff, so we don't ignore packets with seq zero. Signed-off-by: Bradley Peterson <despite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-13net: fsl: fec: handle 10Mbps speed in RMII modeEric Benard2-3/+10
when the link is 10 Mbps and the mode is RMII, it's necessary to set FRCONT to 1 in MIIGSK_CFGR to divide the RMII source clock by 10 in order to support 10 Mbps operations. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-13drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c: add missing iounmapJulia Lawall1-1/+1
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-13drivers/net/ethernet/tundra/tsi108_eth.c: add missing iounmapJulia Lawall1-2/+4
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-13ksz884x: fix mtu for VLANDoug Kehn1-1/+1
The Ethernet header does not account for the addition of a VLAN header. Full size Ethernet frames containing VLAN header are not processed because the frame is larger than the resulting hw mtu. Signed-off-by: Doug Kehn <rdkehn@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-13dp83640: Fix NOHZ local_softirq_pending 08 warningManfred Rudigier1-1/+1
Similar problem as in 481a8199142c050b72bff8a1956a49fd0a75bbe0 ("can: fix NOHZ local_softirq_pending 08 warning"). This fix replaces netif_rx() with netif_rx_ni() which has to be used from process/softirq context. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-30 05:24:42 +0300