summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2008-10-23Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds8-9/+29
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Add info->archdata field i2c: Inform about deprecated chips directory i2c: Use pci_ioremap_bar() Schedule removal of the legacy i2c device driver binding model i2c: Clean up <linux/i2c.h> i2c: Update and clean up writing-clients document i2c: Drop 2-byte address block transfer defines i2c: Delete legacy model documentation i2c: Constify i2c_get_clientdata's parameter i2c: Delete outdated client porting guide i2c: Make clear what the class field of i2c_adapter is good for i2c-algo-pcf: Fix typo in debugging log message i2c-algo-pcf: Add adapter hooks around xfer begin and end i2c-algo-pcf: Pass adapter data into ->waitforpin() method i2c-i801: Add support for Intel Ibex Peak
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds16-35/+792
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: don't rebind drivers after failed resume or reset USB: fix memory leak in cdc-acm USB: Unusual dev for Mio moov 330 gps USB: cdc-wdm: make module autoload work USB: Fix unneeded endpoint check in pxa27x_udc usb/gadget: fix kernel-doc warning USB: Speedtouch: add pre_reset and post_reset routines USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative USB: support Huawei data card product IDs USB: add ZTE MF626 USB GSM modem entry USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge USB: Fix debugfs_create_file's error checking method for usb/gadget/s3c2410_udc USB: ohci: add support for tmio-ohci cell
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds77-3087/+5560
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (42 commits) Staging: usbip: fix build warning on 64bit kernels Staging: me4000: remove some compiler warnings Staging: wbusb: fix a bunch of compiler warnings Staging: w35und: module init cleanup Staging: w35und: use gotos for error handling Staging: w35und: remove spinlock wrappers Staging: sxg: fix compiler warnings. Staging: sxg: fix up unused function warnings Staging: sxg: clean up C99 comments Staging: Lindent the echo driver Staging: SLICOSS: Free multicast list at driver exit Staging: PCC-ACPI: Fix all checkpatch errors Staging: pcc-acpi: update to latest version Staging: Clean up sxg driver Staging: remove remaining uses of __FUNCTION__ Staging: add poch driver Staging: wlan-ng: fix build error if wireless networking is not enabled Staging: echo: remove annoying "end of function" markers Staging: echo: remove __cplusplus macro magic Staging: echo: remove dead code ...
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds13-184/+174
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (21 commits) OProfile: Fix buffer synchronization for IBS oprofile: hotplug cpu fix oprofile: fixing whitespaces in arch/x86/oprofile/* oprofile: fixing whitespaces in arch/x86/oprofile/* oprofile: fixing whitespaces in drivers/oprofile/* x86/oprofile: add the logic for enabling additional IBS bits x86/oprofile: reordering functions in nmi_int.c x86/oprofile: removing unused function parameter in add_ibs_begin() oprofile: more whitespace fixes oprofile: whitespace fixes OProfile: Rename IBS sysfs dir into "ibs_op" OProfile: Rework string handling in setup_ibs_files() OProfile: Rework oprofile_add_ibs_sample() function oprofile: discover counters for op ppro too oprofile: Implement Intel architectural perfmon support oprofile: Don't report Nehalem as core_2 oprofile: drop const in num counters field Revert "Oprofile Multiplexing Patch" x86, oprofile: BUG: using smp_processor_id() in preemptible code x86/oprofile: fix on_each_cpu build error ... Manually fixed trivial conflicts in drivers/oprofile/{cpu_buffer.c,event_buffer.h}
2008-10-23Merge branch 'for_linus' of ↵Linus Torvalds54-354/+443
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (36 commits) V4L/DVB (9336): cx88: always de-alloc frontends on fault condition V4L/DVB (9335): videobuf: split unregister bus creating self-contained frontend de-allocator V4L/DVB (9334): cx88: dvb_remove debug output V4L/DVB (9333): cx88: Not all boards that requires cx88-mpeg has frontends V4L/DVB (9332): cx88: initial fix for analogue only compilation V4L/DVB (9331): Remove unused inode parameter from video_ioctl2 V4L/DVB (9330): Get rid of inode parameter at v4l_compat_translate_ioctl() V4L/DVB (9328): ivtvfb: FB_BLANK_POWERDOWN turns off video output V4L/DVB (9327): v4l: use video_device.num instead of minor in video%d V4L/DVB (9326): ivtv: avoid green flashing when loading ivtv V4L/DVB (9325): ivtv: switch to unlocked_ioctl. V4L/DVB (9324): v4l2: add video_ioctl2_unlocked for unlocked_ioctl support. V4L/DVB (9323): v4l2-int-if: Add enum_framesizes and enum_frameintervals ioctls. V4L/DVB (9322): v4l2-int-if: Export more interfaces to modules V4L/DVB (9321): v4l2-int-if: Define new power state changes V4L/DVB (9320): v4l2: Add 10-bit RAW Bayer formats V4L/DVB (9319): v4l2-int-if: Add cropcap, g_crop and s_crop commands. V4L/DVB (9318): v4l2-int-if: Add command to get slave private data. V4L/DVB (9316): s5h1411: Power down s5h1411 when not in use V4L/DVB (9315): s5h1411: Skip reconfiguring demod modulation if already at the desired modulation ...
2008-10-23Merge git://git.infradead.org/iommu-2.6Linus Torvalds3-154/+229
* git://git.infradead.org/iommu-2.6: Admit to maintaining VT-d, for my sins. dmar: fix uninitialised 'ret' variable in dmar_parse_dev() intel-iommu: use coherent_dma_mask in alloc_coherent amd_iommu: fix nasty bug that caused ILLEGAL_DEVICE_TABLE_ENTRY errors intel-iommu: IA64 support dmar: remove the quirk which disables dma-remapping when intr-remapping enabled dmar: Use queued invalidation interface for IOTLB and context invalidation dmar: context cache and IOTLB invalidation using queued invalidation dmar: use spin_lock_irqsave() in qi_submit_sync()
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds62-106/+63
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: remove useless subdirs from drivers/ide/
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds19-798/+977
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm: tidy local_init dm: remove unused flush_all dm raid1: separate region_hash interface part1 dm: mark split bio as cloned dm crypt: remove waitqueue dm crypt: fix async split dm crypt: tidy sector dm: remove dm header from targets dm: publish array_too_big dm exception store: fix misordered writes dm exception store: refactor zero_area dm snapshot: drop unused last_percent dm snapshot: fix primary_pe race dm kcopyd: avoid queue shuffle
2008-10-238250: Add more OxSemi devicesLee Howard1-2/+22
These have the Mainpine PCI identifier on however Additional paranoia check for Tornado versions added by Alan Cox (and this time I remembered to do an stg refresh so that the corrections ended up in these patches not randomly attached to another diff -- Alan) Signed-off-by: Lee Howard <lee.howard@mainpine.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-238250: Oxford Semiconductor DevicesLee Howard2-1/+230
Add support for the OxSemi 'Tornado' devices. Reformatted and reworked a bit by Alan Cox Signed-off-by: Lee Howard <lee.howard@mainpine.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23tty: Fix tty_port kref screwupAlan Cox1-1/+1
Pass the brown paper bags please. I changed the semantics of this so the function was supposed to do the extra kref itself then forgot to do the change.. duh.... Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23watchdog: Fix warningAlan Cox1-1/+1
This seems to have popped up after the recent merges: drivers/watchdog/w83697ug_wdt.c: In function ‘w83697ug_select_wd_register’: drivers/watchdog/w83697ug_wdt.c:105: warning: ‘return’ with a value, in function returning void Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6Linus Torvalds3-0/+327
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: xtensa: Add config files for Diamond 232L - Rev B processor variant xtensa: Fix io regions xtensa: Add support for the Sonic Ethernet device for the XT2000 board. xtensa: replace remaining __FUNCTION__ occurrences xtensa: use newer __SPIN_LOCK_UNLOCKED macro XTENSA: warn about including <asm/rwsem.h> directly.
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds16-53/+185
* git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (53 commits) powerpc: Support for relocatable kdump kernel powerpc: Don't use a 16G page if beyond mem= limits powerpc: Add del_node() for early boot code to prune inapplicable devices. powerpc: Further compile fixup for STRICT_MM_TYPECHECKS powerpc: Remove empty #else from signal_64.c powerpc: Move memory size print into common show_cpuinfo for 32-bit hvc_console: Remove __devexit annotation of hvc_remove() hvc_console: Add support for tty window resizing hvc_console: Fix loop if put_char() returns 0 hvc_console: Add tty driver flag TTY_DRIVER_RESET_TERMIOS hvc_console: Add a hangup notifier for backends powerpc/83xx: Add DS1339 RTC support for MPC8349E-mITX boards .dts powerpc/83xx: Add support for MCU microcontroller in .dts files powerpc/85xx: Move mpc8572ds.dts to address-cells/size-cells = <2> of/spi: Support specifying chip select as active high via device tree powerpc: Remove device_type = "board_control" properties in .dts files i2c-cpm: Suppress autoprobing for devices powerpc/85xx: Fix mpc8536ds dma interrupt numbers powerpc/85xx: Enable enhanced functions for 8536 TSEC powerpc: Delete unused prom_strtoul and prom_memparse ...
2008-10-23Merge branch 'for-upstream' of ↵Linus Torvalds87-0/+31511
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (47 commits) uwb: wrong sizeof argument in mac address compare uwb: don't use printk_ratelimit() so often uwb: use kcalloc where appropriate uwb: use time_after() when purging stale beacons uwb: add credits for the original developers of the UWB/WUSB/WLP subsystems uwb: add entries in the MAINTAINERS file uwb: depend on EXPERIMENTAL wusb: wusb-cbaf (CBA driver) sysfs ABI simplification uwb: document UWB and WUSB sysfs files uwb: add symlinks in sysfs between radio controllers and PALs uwb: dont tranmit identification IEs uwb: i1480/GUWA100U: fix firmware download issues uwb: i1480: remove MAC/PHY information checking function uwb: add Intel i1480 HWA to the UWB RC quirk table uwb: disable command/event filtering for D-Link DUB-1210 uwb: initialize the debug sub-system uwb: Fix handling IEs with empty IE data in uwb_est_get_size() wusb: fix bmRequestType for Abort RPipe request wusb: fix error path for wusb_set_dev_addr() wusb: add HWA host controller driver ...
2008-10-23Merge branch 'for-next' of git://git.o-hand.com/linux-mfdLinus Torvalds11-419/+1881
* 'for-next' of git://git.o-hand.com/linux-mfd: mfd: check for platform_get_irq() return value in sm501 mfd: use pci_ioremap_bar() in sm501 mfd: Don't store volatile bits in WM8350 register cache mfd: don't export wm3850 static functions mfd: twl4030-gpio driver mfd: rtc-twl4030 driver mfd: twl4030 IRQ handling update
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds41-120/+6332
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Reject dynamic memory add/remove when ehca adapter is present IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter IPoIB: Set netdev offload features properly for child (VLAN) interfaces IPoIB: Clean up ethtool support mlx4_core: Add Ethernet PCI device IDs mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC mlx4_core: Multiple port type support mlx4_core: Ethernet MAC/VLAN management mlx4_core: Get ethernet MTU and default address from firmware mlx4_core: Support multiple pre-reserved QP regions Update NetEffect maintainer emails to Intel emails RDMA/cxgb3: Remove cmid reference on tid allocation failures IB/mad: Use krealloc() to resize snoop table IPoIB: Always initialize poll_timer to avoid crash on unload IB/ehca: Don't allow creating UC QP with SRQ mlx4_core: Add QP range reservation support RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
2008-10-23Merge branch 'upstream-linus' of ↵Linus Torvalds4-13/+61
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_via: load DEVICE register when CTL changes libata: set device class to NONE if phys_offline libata-eh: fix slave link EH action mask handling libata: transfer EHI control flags to slave ehc.i libata-sff: fix ata_sff_post_internal_cmd() libata: initialize port_task when !CONFIG_ATA_SFF
2008-10-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-2/+2
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] clps711x: add sparsemem definitions [ARM] 5315/1: Fix section mismatch warning (sa1111) [ARM] Orion: activate workaround for 88f6183 SPI clock erratum [ARM] Orion: instantiate the dsa switch driver [ARM] mv78xx0: force link speed/duplex on eth2/eth3 [ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c [ARM] balance parenthesis in header file [ARM] pxa: fix trizeps PCMCIA build [ARM] pxa: fix trizeps defconfig [ARM] dmabounce requires ZONE_DMA [ARM] 5303/1: period_cycles should be greater than 1 [ARM] 5310/1: Fix cache flush functions for ARMv4 [ARM] pxa: fix 3bca103a1e658d23737d20e1989139d9ca8973bf [ARM] pxa: fix redefinition of NR_IRQS [ARM] S3C24XX: Fix redefine of DEFINE_TIMER() in s3c24xx pwm-clock.c [ARM] S3C2443: Fix HCLK rate [ARM] S3C24XX: Serial driver debug depends on DEBUG_LL [ARM] S3C24XX: pwm-clock set_parent mask fix
2008-10-23sata_via: load DEVICE register when CTL changesTejun Heo1-3/+32
VIA controllers clear DEVICE register when IEN changes. Make sure DEVICE is updated along with CTL. This change is separated from Joseph Chan's larger patch. http://thread.gmane.org/gmane.linux.kernel.commits.mm/40640 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-23libata: set device class to NONE if phys_offlineTejun Heo1-8/+8
Reset methods don't have access to phys link status for slave links and may incorrectly indicate device presence causing unnecessary probe failures for unoccupied links. This patch clears device class to NONE during post-reset processing if phys link is offline. As on/offlineness semantics is strictly defined and used in multiple places by the core layer, this won't change behavior for drivers which don't use slave links. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-23libata-eh: fix slave link EH action mask handlingTejun Heo1-1/+4
Slave link action mask is transferred to master link and all the EH actions are taken by the master link. ata_eh_about_to_do() and ata_eh_done() are called with ATA_EH_ALL_ACTIONS to clear the slave link actions during transfer. This always sets ATA_PFLAG_RECOVERED flag causing spurious "EH complete" messages. Don't set ATA_PFLAG_RECOVERED for slave link actions. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-23libata: transfer EHI control flags to slave ehc.iTejun Heo1-0/+5
ATA_EHI_NO_AUTOPSY and ATA_EHI_QUIET are used to control the behavior of EH. As only the master link is visible outside EH, these flags are set only for the master link although they should also apply to the slave link, which causes spurious EH messages during probe and suspend/resume. This patch transfers those two flags to slave ehc.i before performing slave autopsy and reporting. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-23libata-sff: fix ata_sff_post_internal_cmd()Tejun Heo1-1/+10
ata_sff_post_internal_cmd() needs to grab port lock before calling ata_bmdma_stop() and also need to clear hsm_task_state. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-23libata: initialize port_task when !CONFIG_ATA_SFFTejun Heo1-0/+2
ap->port_task was not initialized if !CONFIG_ATA_SFF later triggering lockdep warning. Make sure it's initialized. Reported by Larry Finger. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-23Merge branches 'cma', 'cxgb3', 'ehca', 'ipoib', 'mad', 'mlx4' and 'nes' into ↵Roland Dreier40-118/+6330
for-next
2008-10-23IB/ehca: Reject dynamic memory add/remove when ehca adapter is presentStefan Roscher1-0/+48
Since the ehca device driver does not support dynamic memory add and remove operations, the driver must explicitly reject such requests in order to prevent unpredictable behaviors related to existing memory regions that cover all of memory being used by InfiniBand protocols in the kernel. The solution (for now at least) is to add a memory notifier to the ehca device driver and if a request for dynamic memory add or remove comes in, ehca will always reject it. The user can add or remove memory by hot-removing the ehca adapter, performing the memory operation, and then hot-adding the ehca adapter back. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-23IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapterStefan Roscher4-19/+26
Because ehca adapters can differ in the maximum number of QPs and CQs we have to save the maximum number of these ressources per adapter and not globally per ehca driver. This fix introduces 2 new members to the shca structure to store the maximum value for QPs and CQs per adapter. The module parameters are now used as initial values for those variables. If a user selects an invalid number of CQs or QPs we don't print an error any longer, instead we will inform the user with a warning and set the values to the respective maximum supported by the HW. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-23IPoIB: Set netdev offload features properly for child (VLAN) interfacesOr Gerlitz3-28/+44
Child devices were created without any offload features set, fix this by moving the code that computes the features into generic function which is now called through non-child and child device creation. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> -- v1 has a bug where the 'result' flag in ipoib_vlan_add may be used uninitialized Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-23IPoIB: Clean up ethtool supportOr Gerlitz1-1/+8
Add a get_rx_csum method. Remove the driver's own get_tso method, as the ethtool kernel code uses the default one if nothing is provided. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-23mlx4_core: Add Ethernet PCI device IDsYevgeny Petrilin1-0/+2
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-23mlx4_en: Add driver for Mellanox ConnectX 10GbE NICYevgeny Petrilin12-0/+5370
The Mellanox ConnectX can operate as an InfiniBand adapter, as an Ethernet NIC, or as a Fibre Channel (FC) HBA. The kernel has a low-level driver, mlx4_core, which handles multiplexing access to the device, and there is also already an InfiniBad driver, mlx4_ib. This patch adds a new driver, mlx4_en, which implements a standard Ethernet NIC driver. Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-23mlx4_core: Multiple port type supportYevgeny Petrilin8-11/+252
Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Ethernet MAC/VLAN managementYevgeny Petrilin4-1/+307
Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22i2c: Add info->archdata fieldAnton Vorontsov1-0/+3
If present the info->archdata is copied into the dev->archdata. Some (OpenFirmware) platforms need it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22i2c: Inform about deprecated chips directoryWolfram Sang2-1/+4
The chips directory under drivers/i2c is deprecated. Spread the word! Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22i2c: Use pci_ioremap_bar()Arjan van de Ven1-1/+1
Use the newly introduced pci_ioremap_bar() function in drivers/i2c. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22i2c-algo-pcf: Fix typo in debugging log messageDavid Miller1-1/+1
Fix typo in debugging log message. deteted --> detected Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22i2c-algo-pcf: Add adapter hooks around xfer begin and endDavid Miller1-4/+13
Some I2C bus implementations need to synchronize with external entities, such as system firmware, which might also be programming the same I2C bus. In order to facilitate this add ->xfer_begin() and ->xfer_end() hooks which are invoked around pcf_xfer(). [JD: Make these hooks optional.] Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22i2c-algo-pcf: Pass adapter data into ->waitforpin() methodDavid Miller2-2/+3
Pass adapter data into ->waitforpin() method. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22i2c-i801: Add support for Intel Ibex PeakSeth Heasley2-0/+4
Adds the Intel Ibex Peak (PCH) SMBus Controller Device IDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22mlx4_core: Get ethernet MTU and default address from firmwareYevgeny Petrilin3-7/+14
Get maximum ethernet MTU and default MAC address from the firmware QUERY_DEV_CAP command. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Support multiple pre-reserved QP regionsYevgeny Petrilin12-28/+126
For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22USB: don't rebind drivers after failed resume or resetAlan Stern2-2/+3
This patch (as1152) may help prevent some problems associated with the new policy of unbinding drivers that don't support suspend/resume or pre_reset/post_reset. If for any reason the resume or reset fails, and the device is logically disconnected, there's no point in trying to rebind the driver. So the patch checks for success before carrying out the unbind/rebind. There was a report from one user that this fixed a problem he was experiencing, but the details never became fully clear. In any case, adding these tests can't hurt. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22USB: fix memory leak in cdc-acmOliver Neukum1-1/+2
This fixes a memory leak on disconnect in cdc-acm Thanks to 施金前 for finding it. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22USB: Unusual dev for Mio moov 330 gpsFrédéric Marchal1-0/+9
Here is an entry for the unusual_devs.h file to handle a Mio Moov 330 GPS that stops responding when it is requested to transfer more than 64KB. The patch is taken against kernel-2.6.27-git3. Signed-off-by: Frédéric Marchal <frederic.marchal@wowcompany.co Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22USB: cdc-wdm: make module autoload workOliver Neukum1-0/+2
this fixes an omission that led to no alias being computed for the cdc-wdm module. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22USB: Fix unneeded endpoint check in pxa27x_udcRobert Jarzmik1-1/+1
The request allocation code doesn't need to check if the endpoint is not NULL, as the only caller in include/linux/usb/gadget.h, usb_ep_alloc_request() needs the endpoint pointer to have a correct value to trigger the allocation code. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22usb/gadget: fix kernel-doc warningRandy Dunlap1-1/+1
Fix kernel-doc warning, wrong parameter name listed: Warning(lin2627-g3-kdocfixes//drivers/usb/gadget/config.c:183): No description found for parameter 'match' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22USB: Speedtouch: add pre_reset and post_reset routinesAlan Stern1-0/+12
This patch (as1150) fixes a problem in the speedtch driver. When it resets the modem during probe it will be unbound from the other interfaces it has claimed, because it doesn't define a pre_reset and a post_reset method. The patch defines "do-nothing" methods. This fixes Bugzilla #11767. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-07 04:40:53 +0300