summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-01-29Merge branch 'master' of ↵David S. Miller12-162/+76
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to e1000e, ixgbevf, igb and igbvf. Majority of the patches are code cleanups of e1000e where code is removed (Yeah!). The other two e1000e patches are fixes. The first is to fix the maximum frame size for 82579 devices. The second fix is to resolve an issue with devices other than 82579 that suffer from dropped transactions on platforms with deep C-states when jumbo frames are enabled. The ixgbevf patch is to ensure that the driver fetches the correct, refreshed value for link status and speed when the values have changed. The igb and igbvf patches are a solution to an issue Stefan Assmann reported, where when the PF is up and igbvf is loaded, the MAC address is not generated using eth_hw_addr_random(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29can: rework skb reserved data handlingOliver Hartkopp2-4/+4
Added accessor and skb_reserve helpers for struct can_skb_priv. Removed pointless skb_headroom() check. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> CC: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28igbvf: be sane about random MAC addressesMitch A Williams1-14/+10
Tighten up some of the code surrounding MAC addresses. Since the PF is now giving all zeros instead of a random address, check for this case and generate a random address. This ensures that we always know when we have a random address and udev won't get upset about it. Additionally, tighten up some of the log messages and clean up the formatting. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28igb: Don't give VFs random MAC addressesMitch A Williams1-3/+3
If the user has not assigned a MAC address to a VM, then don't give it a random one. Instead, just give it zeros and let it figure out what to do with them. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28ixgbevf: Make sure link status and speed are fetchedGreg Rose1-0/+1
A recent change makes it necessary to set get_link_status to ensure that the driver fetches the correct, refreshed value for link status and speed when it has changed in the physical function device. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: cleanup: remove comments which are no longer applicableBruce Allan1-7/+0
Code was removed but the applicable comments were not. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: cleanup hw.hBruce Allan1-15/+10
Remove unnecessary #include, forward prototype of struct e1000_adapter and an empty comment; fix a comment which mentions "static data for the MAC" which is not applicable to the following struct; and cleanup some whitespace issues. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: cleanup: remove unused #defineBruce Allan1-3/+0
All references to E1000_ERT_2048 have been removed. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: adjust PM QoS requestBruce Allan2-15/+19
It has been found that devices other than 82579 (a.k.a. e1000_pch2lan) suffer from dropped transactions on platforms with deep C-states when jumbo frames are enabled. For example, LOMs on ICH9- and ICH10-based platforms which recently had early-receive de-featured (for stability reasons) suffer from this. To resolve this for all devices, when jumbo frames are enabled set the PM QoS DMA latency request based on the size of the receive packet buffer less one full frame. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: correct maximum frame size on 82579Bruce Allan1-1/+1
The largest jumbo frame supported by the 82579 hardware is 9018. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: cleanup: remove e1000e_commit_phy()Bruce Allan4-28/+16
Remove the function e1000e_commit_phy() and replace the few calls to it with the same function pointer that it would call. The function pointer is almost always set for the devices that access these code paths so there is no risk of a NULL pointer dereference; for the few instances where the function pointer might not be set (i.e. can be called for the few devices which do not have this function pointer set), check for a valid function pointer. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: cleanup: remove e1000_get_cable_length()Bruce Allan2-7/+2
Remove the function e1000_get_cable_length() and replace the two calls to it with the same function pointer that it would call. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: cleanup: remove e1000_get_phy_cfg_done()Bruce Allan1-19/+1
Remove the function e1000_get_phy_cfg_done() and replace the single call to it with the same function pointer that it would call. The function pointer is always set so there is no risk of a NULL pointer dereference. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: cleanup: rename e1000_get_cfg_done()Bruce Allan4-6/+6
In keeping with the e1000e driver function naming convention, the subject function is renamed to indicate it is generic, i.e. it is applicable to more than just a single MAC family (e.g. 80003es2lan, 82571, ich8lan). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: cleanup: remove e1000_force_speed_duplex()Bruce Allan1-17/+1
Remove the function e1000_force_speed_duplex() and replace the single call to it with the same function pointer that it would call. The function pointer is always set so there is no risk of a NULL pointer dereference. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28e1000e: cleanup: remove e1000_set_d0_lplu_state()Bruce Allan1-27/+6
Replace the function e1000_set_d0_lplu_state() with the contents of it coded in place of the single call to the function. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-28net: fix possible wrong checksum generationEric Dumazet3-9/+18
Pravin Shelar mentioned that GSO could potentially generate wrong TX checksum if skb has fragments that are overwritten by the user between the checksum computation and transmit. He suggested to linearize skbs but this extra copy can be avoided for normal tcp skbs cooked by tcp_sendmsg(). This patch introduces a new SKB_GSO_SHARED_FRAG flag, set in skb_shinfo(skb)->gso_type if at least one frag can be modified by the user. Typical sources of such possible overwrites are {vm}splice(), sendfile(), and macvtap/tun/virtio_net drivers. Tested: $ netperf -H 7.7.8.84 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3959.52 $ netperf -H 7.7.8.84 -t TCP_SENDFILE TCP SENDFILE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3216.80 Performance of the SENDFILE is impacted by the extra allocation and copy, and because we use order-0 pages, while the TCP_STREAM uses bigger pages. Reported-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller19-33/+1309
Marc Kleine-Budde says: ==================== this is a pull-request for net-next/master. There is are 9 patches by Fabio Baltieri and Kurt Van Dijck which add LED infrastructure and support for CAN devices. Bernd Krumboeck adds a driver for the USB CAN adapter from 8 devices. Oliver Hartkopp improves the CAN gateway functionality. There are 4 patches by me, which clean up the CAN's Kconfig. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28net/mlx4_en: Initialize RFS filters lock and list in init_netdevAmir Vadai1-3/+5
filters_lock might have been used while it was re-initialized. Moved filters_lock and filters_list initialization to init_netdev instead of alloc_resources which is called every time the device is configured. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28net/mlx4_en: Fix a race when closing TX queueAmir Vadai1-1/+15
There is a possible race where the TX completion handler can clean the entire TX queue between the decision that the queue is full and actually closing it. To avoid this situation, check again if the queue is really full, if not, reopen the transmit and continue with sending the packet. CC: Eric Dumazet <edumazet@google.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28net/mlx4_core: Return proper error code when __mlx4_add_one failsJack Morgenstein1-2/+5
Returning 0 (success) when in fact we are aborting the load, leads to kernel panic when unloading the module. Fix that by returning the actual error code. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28net/mlx4_en: Use the correct netif lock on ndo_set_rx_modeEugenia Emantayev1-2/+2
The device multicast list is protected by netif_addr_lock_bh in the networking core, we should use this locking practice in mlx4_en too. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28net/mlx4_en: Fix traffic loss under promiscuous modeAviad Yehezkel1-9/+26
When port is stopped and flow steering mode is not device managed: promisc QP rule wasn't removed from MCG table. Added code to remove it in all flow steering modes. In addition, promsic rule removal should be in stop port and not in start port - moved it accordingly. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28net/mlx4_en: Issue the dump eth statistics command under lockEugenia Emantayev1-4/+4
Performing the DUMP_ETH_STATS firmware command outside the lock leads to kernel panic when data structures such as RX/TX rings are freed in parallel, e.g when one changes the mtu or ring sizes. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27e1000e: cleanup: do not assign a variable a value when not necessaryBruce Allan7-20/+20
Static analysis with cppcheck has shown a few instances of a variable being reassigned a value before the old one has been used. None of these ever require the old value to be used so remove the old values. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: do not ignore variables which get set a valueBruce Allan4-6/+14
Static analysis with cppcheck has shown a few instances of a variable which is assigned a value that is never used. A number of these are the return status of various driver function calls which should be passed back to the caller of the current function. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: cleanup: remove unnecessary function prototypesBruce Allan4-13/+6
...and cleanup some whitespace in other prototypes. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: add comment to spinlock_t definitionBruce Allan1-1/+1
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: remove definition of struct which is no longer usedBruce Allan1-10/+0
The e1000e driver has been converted to use extended descriptors instead of the older legacy descriptor type. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: fix PHY init workarounds for i217/i218Bruce Allan1-0/+9
Toggling the LANPHYPC Value bit cycles the power on the PHY and sets it back to power-on defaults. This includes setting it's MAC-PHY messaging mode to use the PCIe-like interconnect, so the MAC must also be set back from SMBus mode to PCIe mode otherwise the PHY can be inaccessible. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: correct maximum frame size on i217/i218Bruce Allan1-1/+1
The largest jumbo frame supported by the i217 and i218 hardware is 9018. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: update copyright dateBruce Allan15-16/+16
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: remove prototype of non-existent functionBruce Allan1-2/+0
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: prevent hardware from automatically configuring PHY on I217/I218Bruce Allan1-15/+7
As done with the previous generation managed 82579, prevent the PHY from being put into an unknown state by blocking the hardware from automatically configuring the PHY as done with the previous generation managed 82579. Instead, the driver should configure the PHY with contents of the EEPROM image. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: enable ECC on I217/I218 to catch packet buffer memory errorsBruce Allan6-0/+71
In rare instances, memory errors have been detected in the internal packet buffer memory on I217/I218 when stressed under certain environmental conditions. Enable Error Correcting Code (ECC) in hardware to catch both correctable and uncorrectable errors. Correctable errors will be handled by the hardware. Uncorrectable errors in the packet buffer will cause the packet to be received with an error indication in the buffer descriptor causing the packet to be discarded. If the uncorrectable error is in the descriptor itself, the hardware will stop and interrupt the driver indicating the error. The driver will then reset the hardware in order to clear the error and restart. Both types of errors will be accounted for in statistics counters. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: add support for IEEE-1588 PTPBruce Allan8-3/+417
Add PTP IEEE-1588 support and make accesible via the PHC subsystem. v2: make e1000e_ptp_clock_info a static const struct per Stephen Hemminger Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: fix flow-control thresholds for jumbo frames on 82579/I217/I218Bruce Allan1-6/+9
The previous static flow-control thresholds were causing unnecessary pause packets to be transmitted when jumbo frames are configured reducing the throughput. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27e1000e: fix ethtool offline register test for I217Bruce Allan1-8/+17
The SHRAH[9] register on I217 has a different R/W bit-mask than RAR and SHRAL/H registers. Set R/W bit-mask appropriately for SHRAH[9] when testing the R/W ability of the register. Also, fix the error message log format so that it does not provide misleading information (i.e. the logged register address could be incorrect). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-27Merge branch 'master' of ↵David S. Miller9-213/+375
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27qlcnic: Bump up the version to 5.1.32Jitendra Kalsaria1-3/+3
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27qlcnic: add support for FDB netdevice ops.Jitendra Kalsaria4-9/+117
Providing communication channel between KVM and e-Switch so that it can be informed when hypervisor configures a MAC address and VLAN. qlcnic_mac_learn module param usage will be changed to: 0 = MAC learning is disable 1 = Driver learning is enable 2 = FDB learning is enable Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27qlcnic: sleeping function called from invalid contextJitendra Kalsaria1-1/+1
device eth0 entered promiscuous mode BUG: sleeping function called from invalid context at mm/slub.c:930 in_atomic(): 1, irqs_disabled(): 0, pid: 5911, name: brctl INFO: lockdep is turned off. Pid: 5911, comm: brctl Tainted: GF W O 3.6.0-0.rc7.git1.4.fc18.x86_64 #1 Call Trace: [<ffffffff810a29ca>] __might_sleep+0x18a/0x240 [<ffffffff811b5d77>] __kmalloc+0x67/0x2d0 [<ffffffffa00a61a9>] ? qlcnic_alloc_lb_filters_mem+0x59/0xa0 [qlcnic] [<ffffffffa00a61a9>] qlcnic_alloc_lb_filters_mem+0x59/0xa0 [qlcnic] [<ffffffffa009e1c1>] qlcnic_set_multi+0x81/0x100 [qlcnic] [<ffffffff8159cccf>] __dev_set_rx_mode+0x5f/0xb0 [<ffffffff8159cd4f>] dev_set_rx_mode+0x2f/0x50 [<ffffffff8159d00c>] dev_set_promiscuity+0x3c/0x50 [<ffffffffa05ed728>] br_add_if+0x1e8/0x400 [bridge] [<ffffffffa05ee2df>] add_del_if+0x5f/0x90 [bridge] [<ffffffffa05eee0b>] br_dev_ioctl+0x4b/0x90 [bridge] [<ffffffff8159d613>] dev_ifsioc+0x373/0x3b0 [<ffffffff8159d78f>] dev_ioctl+0x13f/0x860 [<ffffffff812dd6e1>] ? avc_has_perm_flags+0x31/0x2c0 [<ffffffff8157c18d>] sock_do_ioctl+0x5d/0x70 [<ffffffff8157c21d>] sock_ioctl+0x7d/0x2c0 [<ffffffff812df922>] ? inode_has_perm.isra.48.constprop.61+0x62/0xa0 [<ffffffff811e4979>] do_vfs_ioctl+0x99/0x5a0 [<ffffffff812df9f7>] ? file_has_perm+0x97/0xb0 [<ffffffff810d716d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff811e4f19>] sys_ioctl+0x99/0xa0 [<ffffffff816e7369>] system_call_fastpath+0x16/0x1b br0: port 1(eth0) entered forwarding state br0: port 1(eth0) entered forwarding state Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27qlcnic: Fix LED/Beaconing tests to work on all ports of an adapter.Himanshu Madhani1-1/+1
Provide port number in command payload for LED/Beaconing tests. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27qlcnic: avoid mixed mode interrupts for some adapter typesManish chopra1-9/+26
o Some adapter types do not support co-existence of Legacy Interrupt with MSI-x or MSI among multiple functions. For those adapters, prevent attaching to a function during normal load, if MSI-x or MSI vectors are not available. o Using module parameters use_msi=0 and use_msi_x=0, driver can be loaded in legacy mode for all functions in the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27qlcnic: enable RSS for TCP over IPv6Shahed Shaikh1-6/+15
o This patch enables RSS for TYPE-C packets to enable RSS for TCP over IPv6 Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27qlcnic: enable LRO on IPv6 without dest ip checkShahed Shaikh4-7/+38
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-27qlcnic: set driver version in firmwareSritej Velaga3-0/+42
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-26can: add private data space for CAN sk_buffsOliver Hartkopp2-2/+14
The struct can_skb_priv is used to transport additional information along with the stored struct can(fd)_frame that can not be contained in existing struct sk_buff elements. can_skb_priv is located in the skb headroom, which does not touch the existing CAN sk_buff usage with skb->data and skb->len, so that even out-of-tree CAN drivers can be used without changes. Btw. out-of-tree CAN drivers without can_skb_priv in the sk_buff headroom would not support features based on can_skb_priv. The can_skb_priv->ifindex contains the first interface where the CAN frame appeared on the local host. Unfortunately skb->skb_iif can not be used as this value is overwritten in every netif_receive_skb() call. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-01-26can: usb_8dev: add LED trigger supportBernd Krumboeck1-0/+11
Add support for canbus activity led indicators on usb_8dev devices by calling appropriate can_led functions. These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op otherwise. Signed-off-by: Bernd Krumboeck <krumboeck@universalnet.at> Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-01-26can: sja1000: add LED trigger supportFabio Baltieri1-1/+16
Add support for canbus activity led indicators on sja1000 devices by calling appropriate can_led functions. These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op otherwise. Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-24 05:17:10 +0300