summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-07-16mlxsw: spectrum: Prevent overwrite of DCB capability fieldsIdo Schimmel1-0/+2
The number of supported traffic classes that can have ETS and PFC simultaneously enabled is not subject to user configuration, so make sure we always initialize them to the correct values following a set operation. Fixes: 8e8dfe9fdf06 ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16mlxsw: spectrum: Don't emit errors when PFC is disabledIdo Schimmel1-1/+2
We can't have PAUSE frames and PFC both enabled on the same port, but the fact that ieee_setpfc() was called doesn't necessarily mean PFC is enabled. Only emit errors when PAUSE frames and PFC are enabled simultaneously. Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16mlxsw: spectrum: Indicate support for autonegotiationIdo Schimmel1-1/+2
The device supports link autonegotiation, so let the user know about it by indicating support via ethtool ops. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16mlxsw: spectrum: Force link training according to admin stateIdo Schimmel1-24/+1
When setting a new speed we need to disable and enable the port for the changes to take effect. We currently only do that if the operational state of the port is up. However, setting a new speed following link training failure will require us to explicitly set the port down and then up. Instead, disable and enable the port based on its administrative state. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16macvtap: switch to use skb arrayJason Wang1-11/+71
This patch switch to use skb array instead of sk_receive_queue to avoid spinlock contentions. Tests shows about 21% improvements for guest rx pps: Before: 1472731 pkts/s After: 1786289 pkts/s Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16macvtap: avoid hash calculating for single queueJason Wang1-0/+4
We decide the rxq through calculating its hash which is not necessary if we only have one rx queue. So this patch skip this and just return queue 0. Test shows 22% improving on guest rx pps. Before: 1201504 pkts/s After: 1472731 pkts/s Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16Merge branch 'master' of ↵David S. Miller4-44/+66
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-07-14 This series contains fixes to i40e and ixgbe. Alex fixes issues found in i40e_rx_checksum() which was broken, where the checksum was being returned valid when it was not. Kiran fixes a bug which was found when we abruptly remove a cable which caused a panic. Set the VSI broadcast promiscuous mode during VSI add sequence and prevents adding MAC filter if specified MAC address is broadcast. Paolo Abeni fixes a bug by returning the actual work done, capped to weight - 1, since the core doesn't allow to return the full budget when the driver modifies the NAPI status. Guilherme Piccoli fixes an issue where the q_vector initialization routine sets the affinity _mask of a q_vector based on v_idx value. This means a loop iterates on v_idx, which is an incremental value, and the cpumask is created based on this value. This is a problem in systems with multiple logical CPUs per core (like in SMT scenarios). Changed the way q_vector's affinity_mask is created to resolve the issue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16r8152: add MODULE_VERSIONGrant Grundler1-0/+1
ethtool -i provides a driver version that is hard coded. Export the same value via "modinfo". Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16media: fix airspy usb probe error pathJames Patrick-Evans1-2/+1
Fix a memory leak on probe error of the airspy usb device driver. The problem is triggered when more than 64 usb devices register with v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV. The memory leak is caused by the probe function of the airspy driver mishandeling errors and not freeing the corresponding control structures when an error occours registering the device to v4l2 core. A badusb device can emulate 64 of these devices, and then through continual emulated connect/disconnect of the 65th device, cause the kernel to run out of RAM and crash the kernel, thus causing a local DOS vulnerability. Fixes CVE-2016-5400 Signed-off-by: James Patrick-Evans <james@jmp-e.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-16EDAC, sb_edac: Fix Knights LandingTony Luck1-14/+6
In commit 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") I broke Knights Landing because I failed to notice that it called a wrapper macro "sbridge_get_all_devices_knl" instead of "sbridge_get_all_devices" like all the other types. Now that we include the processor type in the pci_id_table structure we can skip the wrappers and just have the sbridge_get_all_devices() check the type to decide whether to allow duplicate devices and controllers to have registers spread across buses. Fixes: 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") Tested-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15scsi: ufs: remove unnecessary goto labelTiezhu Yang1-2/+1
When buff_ascii kmalloc failed, there is no need to call kfree, it should return -ENOMEM directly, this patch fixes it. Signed-off-by: Tiezhu Yang <kernelpatch@126.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15hpsa: change hpsa_passthru_ioctl timeoutDon Brace1-2/+2
Was not alloting for FW Flash times. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15hpsa: correct skipping masked peripheralsDon Brace1-5/+74
The SA controller spins down RAID drive spares. A REGNEWD event causes an inquiry to be sent to all physical drives. This causes the SA controller to spin up the spare. The controller suspends all I/O to a logical volume until the spare is spun up. The spin-up can take over 50 seconds. This can result in one or both of the following: - SML sends down aborts and resets to the logical volume and can cause the logical volume to be off-lined. - a negative impact on the logical volume's I/O performance each time a REGNEWD is triggered. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Update driver version to 8.07.00.38-kHimanshu Madhani1-1/+1
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Fix BBCR offsetSawan Chandak1-1/+1
Fixes: 969a619 ("qla2xxx: Add support for buffer to buffer credit value for ISP27XX.") Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Fix duplicate message id.Sawan Chandak3-7/+6
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Disable the adapter and skip error recovery in case of register ↵Sawan Chandak3-1/+59
disconnect. If there is error recovery going on due to command timeout and there is register disconnect, then disable the adapter. Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Separate ISP type bits out from device type.Joe Carnuccio2-24/+26
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Correction to function qla26xx_dport_diagnostics().Joe Carnuccio3-11/+4
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Add support to handle Loop Init error Asynchronus event.Joe Carnuccio2-3/+10
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Let DPORT be enabled purely by nvram.Joe Carnuccio3-7/+8
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Add bsg interface to support statistics counter reset.Sawan Chandak2-25/+27
[mkp: Folded in compile fix] Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Add bsg interface to support D_Port Diagnostics.Joe Carnuccio6-5/+122
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Check for device state before unloading the driver.Sawan Chandak4-13/+52
During hot swap of PCI device, there can be PCI error on device, during normal driver unload. The race between normal driver unload and driver unload due to PCI error, can lead to system crash.Fix is to check if there is unload going on and allow that function to unload the driver. Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Properly reset firmware statistics.Joe Carnuccio5-17/+35
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Properly initialize IO statistics.Joe Carnuccio4-34/+36
Properly initialize IO statistics to avoid initial 0xFFFFFFF (-1) values. Cleanup/simplify usage of pointer to statistics structure. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Make debug buffer log easier to view.Joe Carnuccio1-19/+14
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Add module parameter alternate/short names.Joe Carnuccio1-0/+3
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Set FLOGI retry in additional firmware options for P2P (N2N) mode.Giridhar Malavali2-1/+25
When VP decoupling enabled, there could be a window where, FLOGI from initiators can be dropped before VP0 is enabled, causing link level recovery. Retry FLOGI to avoid link level recovery. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Shutdown board on thermal shutdown aen.Joe Carnuccio4-1/+19
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Add ram area DDR for fwdump template entry T262.Joe Carnuccio3-3/+15
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Remove sysfs node fw_dump_template.Joe Carnuccio2-89/+1
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Update lpfc version to 11.2.0.0James Smart1-1/+1
Update lpfc version to 11.2.0.0 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Copyright updatesJames Smart5-5/+5
Copyright updates Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Disable FDMI probing if not connected to a fabricJames Smart1-0/+4
Disable FDMI probing if not connected to a fabric Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Correct issue with ioremap() call on 32bit kernelJames Smart1-3/+3
Correct issue with ioremap() call on 32bit kernel Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Re-organize source for easier driver attribute managementJames Smart2-96/+117
Re-organize source for easier driver attribute management Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Remove global lpfc_sli_mode attribute in leiu of per-hba lpfc_sli_modeJames Smart4-13/+13
Remove global lpfc_sli_mode attribute in leiu of per-hba lpfc_sli_mode Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Remove global lpfc_delay_discovery attribute in leiu of per-hba ↵James Smart4-7/+6
lpfc_delay_discovery Remove global lpfc_delay_discovery attribute in leiu of per-hba lpfc_delay_discovery Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Remove global lpfc_enable_npiv attribute in leiu of per-hba ↵James Smart3-22/+11
lpfc_enable_npiv Remove global lpfc_enable_npiv attribute in leiu of per-hba lpfc_enable_npiv Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Correct Port reset resulting in FC port going offlineJames Smart1-1/+2
Correct Port reset resulting in FC port going offline Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Add support for XLane LUN priorityJames Smart7-20/+104
Add support for XLane LUN priority Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Correct RDP response Revision locationJames Smart1-1/+1
Correct RDP response Revision location Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Re-organize source for easier device-id managementJames Smart2-100/+123
Re-organize source for easier device-id management Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Correct FCOE discovery to avoid loss of storage devices after system ↵James Smart1-1/+2
reboot Correct FCOE discovery to avoid loss of storage devices after system reboot Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Fix SLI mode 2 config failureJames Smart1-0/+2
Fix SLI mode 2 config failure Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Add MDS Diagnostics SupportJames Smart6-25/+103
Add MDS Diagnostics Support Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Add sysfs proc_name supportJames Smart1-0/+3
Add sysfs proc_name support Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Reject RDP ELS if port has no loginJames Smart1-0/+6
Reject RDP ELS if port has no login Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Correct Buffer credit descriptor values in RDP responseJames Smart2-44/+32
Correct Buffer credit descriptor values in RDP response Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 18:08:38 +0300