summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-05-02Merge branch 'linus' into timers/coreThomas Gleixner62-211/+511
Reason: Pick up the hrtimer_clock_to_base_table fix from mainline Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-02RTC: Disable CONFIG_RTC_CLASS from being built as a moduleJohn Stultz1-5/+2
The RTC subsystem has a number of accessors that are available via include/linux/rtc.h. However many of these interfaces are not available for use if CONFIG_RTC_CLASS=m. So in order to support wider use of the RTC in the kernel, I'm removing the tristate config option for a bool, so that code can easily be conditionalized if the RTC class is present or not. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-02Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2-2/+2
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] irqstats: fix counting of pfault, dasd diag and virtio irqs [S390] prng: fix pointer arithmetic
2011-05-02Merge branch 'hwmon-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (twl4030-madc-hwmon) Return proper error if hwmon_device_register fails
2011-05-01i2c-parport: Fix adapter list handlingJean Delvare1-13/+14
Use a standard list with proper locking to handle the list of adapters. Thankfully it only matters on systems with more than one parallel port, which are very rare. Thanks to Lukasz Kapiec for reporting the problem to me. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-05-01i2c-i801: Move device ID definitions to driverJean Delvare1-0/+5
Move the SMBus device ID definitions of recent devices from pci_ids.h to the i2c-i801.c driver file. They don't have to be shared, as they are clearly identified and only used in this driver. In the future, such IDs will go to i2c-i801 directly. This will make adding support for new devices much faster and easier, as it will avoid cross- subsystem patch sets and merge conflicts. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Seth Heasley <seth.heasley@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-01hwmon: (twl4030-madc-hwmon) Return proper error if hwmon_device_register failsAxel Lin1-2/+1
The driver did not return an error if the call to hwmon_device_register failed. Fix by returning the error reported from hwmon_device_register. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds4-13/+38
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] pmcraid: reject negative request size [SCSI] put stricter guards on queue dead checks [SCSI] scsi_dh: fix reference counting in scsi_dh_activate error path [SCSI] mpt2sas: prevent heap overflows and unchecked reads
2011-04-30Merge branch 'timer-fixes-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: Initialize CLOCK_ID to HRTIMER_BASE table statically rtc: max8925: Call dev_set_drvdata before rtc_device_register
2011-04-29hwmon: (lm85) Fix error paths in probe functionJean Delvare1-2/+2
We must remove all files we created, even in error cases. Fixes second part of kernel bug #34072: https://bugzilla.kernel.org/show_bug.cgi?id=34072 Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-29hwmon: (lm85) Add missing list terminatorsJean Delvare1-0/+2
Fixes kernel bug #34072: https://bugzilla.kernel.org/show_bug.cgi?id=34072 Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-29hwmon: (adm1021) Clarify documentation regarding Xeon processorsJean Delvare1-2/+1
Recent Xeon processor thermal sensors are supported by the coretemp driver and not the adm1021 driver. Only one old generation of Xeon processors (the first Netburst ones) are supported by the adm1021 driver. Reported-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-29hwmon: (lm90) Add support for ADT7461A and NCT1008Guenter Roeck2-11/+19
This patch adds support for ADT7461A and NCT1008 to the lm90 driver. Both chips have identical functionality and report the same manufacturing ID and device ID values. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-04-29[S390] irqstats: fix counting of pfault, dasd diag and virtio irqsHeiko Carstens2-2/+2
pfault, dasd diag and virtio all use the same external interrupt number. The respective interrupt handlers decide by the subcode if they are meant to handle the interrupt. Counting is currently done before looking at the subcode which means each handler counts an interrupt even if it is not handling it. Fix this by moving the kstat code after the code which looks at the subcode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-29Merge branch 'drm-fixes' of ↵Linus Torvalds7-8/+47
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: restore only the mode of this driver on lastclose (v2) drm/radeon/kms: add info query for tile pipes drm/radeon/kms: add missing safe regs for 6xx/7xx drm: select FRAMEBUFFER_CONSOLE_PRIMARY if we have FRAMEBUFFER_CONSOLE
2011-04-28rtc: max8925: Call dev_set_drvdata before rtc_device_registerZhangfei Gao1-1/+2
We call rtc_read_alarm from rtc_device_register, so it is important that the rtc device is fully initialized prior to registration. rtc-max8925 sets drvdata after register, so the rtc_read_alarm code dereferences a NULL pointer. Call dev_set_drvdata before rtc_device_register. [ jstultz/tglx: Massaged commit message ] Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Link: http://lkml.kernel.org/r/%3C1303929869-25249-1-git-send-email-john.stultz%40linaro.org%3E Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-28Merge branch 'pm-fixes' of ↵Linus Torvalds3-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: ACPI / PM: Avoid infinite recurrence while registering power resources PM / Wakeup: Fix initialization of wakeup-related device sysfs files
2011-04-28Merge branch 'spell-fix' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds11-11/+11
* 'spell-fix' of git://git.profusion.mobi/users/lucas/linux-2.6: Revert wrong fixes for common misspellings
2011-04-28Merge branch 'v4l_for_linus' of ↵Linus Torvalds28-145/+361
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (42 commits) [media] media: vb2: correct queue initialization order [media] media: vb2: fix incorrect v4l2_buffer->flags handling [media] s5p-fimc: Add support for the buffer timestamps and sequence [media] s5p-fimc: Fix bytesperline and plane payload setup [media] s5p-fimc: Do not allow changing format after REQBUFS [media] s5p-fimc: Fix FIMC3 pixel limits on Exynos4 [media] tda18271: update tda18271c2_rf_cal as per NXP's rev.04 datasheet [media] tda18271: update tda18271_rf_band as per NXP's rev.04 datasheet [media] tda18271: fix bad calculation of main post divider byte [media] tda18271: prog_cal and prog_tab variables should be s32, not u8 [media] tda18271: fix calculation bug in tda18271_rf_tracking_filters_init [media] omap3isp: queue: Don't corrupt buf->npages when get_user_pages() fails [media] v4l: Don't register media entities for subdev device nodes [media] omap3isp: Don't increment node entity use count when poweron fails [media] omap3isp: lane shifter support [media] omap3isp: ccdc: support Y10/12, 8-bit bayer fmts [media] media: add missing 8-bit bayer formats and Y12 [media] v4l: add V4L2_PIX_FMT_Y12 format cx23885: Fix stv0367 Kconfig dependency [media] omap3isp: Use isp xclk defines ... Fix up trivial conflict (spelink errurs) in drivers/media/video/omap3isp/isp.c
2011-04-27drm/i915: restore only the mode of this driver on lastclose (v2)Dave Airlie4-8/+32
i915 calls the panic handler function on last close to reset the modes, however this is a really bad idea for multi-gpu machines, esp shareable gpus machines. So add a new entry point for the driver to just restore its own fbcon mode. v2: move code into fb helper, fix panic code to block mode change on powered off GPUs. [airlied: this hits drm core and I wrote it and it was reviewed on intel-gfx so really I signed it off twice ;-).] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-27drm/radeon/kms: add info query for tile pipesAlex Deucher1-0/+13
needed by mesa for htile setup. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-27drm/radeon/kms: add missing safe regs for 6xx/7xxAlex Deucher1-0/+1
needed for HiS in mesa. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-27drm: select FRAMEBUFFER_CONSOLE_PRIMARY if we have FRAMEBUFFER_CONSOLEDave Airlie1-0/+1
Multi-gpu/switcheroo relies on this option to get the console on the correct GPU at bootup, some distros enable it but it seems some get it wrong. cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-27Revert wrong fixes for common misspellingsLucas De Marchi11-11/+11
These changes were incorrectly fixed by codespell. They were now manually corrected. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-04-27time: Add timekeeping_inject_sleeptimeJohn Stultz1-14/+9
Some platforms cannot implement read_persistent_clock, as their RTC devices are only accessible when interrupts are enabled. This keeps them from being used by the timekeeping code on resume to measure the time in suspend. The RTC layer tries to work around this, by calling do_settimeofday on resume after irqs are reenabled to set the time properly. However, this only corrects CLOCK_REALTIME, and does not properly adjust the sleep time value. This causes btime in /proc/stat to be incorrect as well as making the new CLOCK_BOTTTIME inaccurate. This patch resolves the issue by introducing a new timekeeping hook to allow the RTC layer to inject the sleep time on resume. The code also checks to make sure that read_persistent_clock is nonfunctional before setting the sleep time, so that should the RTC's HCTOSYS option be configured in on a system that does support read_persistent_clock we will not increase the total_sleep_time twice. CC: Arve Hjønnevåg <arve@android.com> CC: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-04-26Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds3-16/+86
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Erratum #637 workaround amd64_edac: Factor in CC6 save area amd64_edac: Remove node interleave warning EDAC: Remove debugging output in scrub rate handling
2011-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds1-0/+97
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: iTCO_wdt: TCO Watchdog patch for Intel Panther Point PCH
2011-04-26Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds7-67/+158
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] kvm-390: Let kernel exit SIE instruction on work [S390] dasd: check sense type in device change handler [S390] pfault: fix token handling [S390] qdio: reset error states immediately [S390] fix page table walk for changing page attributes [S390] prng: prevent access beyond end of stack [S390] dasd: fix race between open and offline
2011-04-26amd64_edac: Erratum #637 workaroundBorislav Petkov2-2/+51
F15h CPUs may report a non-DRAM address when reporting an error address belonging to a CC6 state save area. Add a workaround to detect this condition and compute the actual DRAM address of the error as documented in the Revision Guide for AMD Family 15h Models 00h-0Fh Processors. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-04-26amd64_edac: Factor in CC6 save areaBorislav Petkov2-1/+29
F15h and later use a portion of DRAM as a CC6 storage area. BIOS programs D18F1x[17C:140,7C:40] DRAM Base/Limit accordingly by subtracting the storage area from the DRAM limit setting. However, in order for edac to consider that part of DRAM too, we need to include it into the per-node range. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-04-26amd64_edac: Remove node interleave warningBorislav Petkov1-5/+1
This warning was wrongfully added for a normal condition - intlvsel actually selects the destination node when node interleaving is enabled and it is not a mismatch. For a detailed example, see section 2.8.10.2 "Node Interleaving" in F10h BKDG. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-04-26watchdog: iTCO_wdt: TCO Watchdog patch for Intel Panther Point PCHSeth Heasley1-0/+97
This patch adds the TCO Watchdog DeviceIDs for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-04-26ACPI / PM: Avoid infinite recurrence while registering power resourcesRafael J. Wysocki1-0/+4
There is at least one BIOS with a DSDT containing a power resource object with a _PR0 entry pointing back to that power resource. In consequence, while registering that power resource acpi_bus_get_power_flags() sees that it depends on itself and tries to register it again, which leads to an infinitely deep recurrence. This problem was introduced by commit bf325f9538d8c89312be305b9779e (ACPI / PM: Register power resource devices as soon as they are needed). To fix this problem use the observation that power resources cannot be power manageable and prevent acpi_bus_get_power_flags() from being called for power resource objects. References: https://bugzilla.kernel.org/show_bug.cgi?id=31872 Reported-and-tested-by: Pascal Dormeau <pdormeau@free.fr> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Len Brown <lenb@kernel.org> Cc: stable@kernel.org
2011-04-26PM / Wakeup: Fix initialization of wakeup-related device sysfs filesRafael J. Wysocki2-1/+2
It turns out that some PCI devices are only found to be wakeup-capable during registration, in which case, when device_set_wakeup_capable() is called, device_is_registered() already returns 'true' for the given device, but dpm_sysfs_add() hasn't been called for it yet. This leads to situations in which the device's power.can_wakeup flag is not set as requested because of failing wakeup_sysfs_add() and its wakeup-related sysfs files are not created, although they should be present. This is a post-2.6.38 regression introduced by commit cb8f51bdadb7969139c2e39c2defd4cde98c1 (PM: Do not create wakeup sysfs files for devices that cannot wake up). To work around this problem initialize the device's power.entry field to an empty list head and make device_set_wakeup_capable() check if it is still empty before attempting to add the devices wakeup-related sysfs files with wakeup_sysfs_add(). Namely, if power.entry is still empty at this point, device_pm_add() hasn't been called yet for the device and its wakeup-related files will be created later, so device_set_wakeup_capable() doesn't have to create them. Reported-and-tested-by: Tino Keitel <tino.keitel@tikei.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-26Merge branch 'for-torvalds' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: rtc: fix coh901331 startup crash mach-ux500: fix i2c0 device setup regression
2011-04-24[SCSI] pmcraid: reject negative request sizeDan Rosenberg1-0/+3
There's a code path in pmcraid that can be reached via device ioctl that causes all sorts of ugliness, including heap corruption or triggering the OOM killer due to consecutive allocation of large numbers of pages. Not especially relevant from a security perspective, since users must have CAP_SYS_ADMIN to open the character device. First, the user can call pmcraid_chr_ioctl() with a type PMCRAID_PASSTHROUGH_IOCTL. A pmcraid_passthrough_ioctl_buffer is copied in, and the request_size variable is set to buffer->ioarcb.data_transfer_length, which is an arbitrary 32-bit signed value provided by the user. If a negative value is provided here, bad things can happen. For example, pmcraid_build_passthrough_ioadls() is called with this request_size, which immediately calls pmcraid_alloc_sglist() with a negative size. The resulting math on allocating a scatter list can result in an overflow in the kzalloc() call (if num_elem is 0, the sglist will be smaller than expected), or if num_elem is unexpectedly large the subsequent loop will call alloc_pages() repeatedly, a high number of pages will be allocated and the OOM killer might be invoked. Prevent this value from being negative in pmcraid_ioctl_passthrough(). Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: stable@kernel.org Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-04-24[SCSI] put stricter guards on queue dead checksJames Bottomley1-8/+8
SCSI uses request_queue->queuedata == NULL as a signal that the queue is dying. We set this state in the sdev release function. However, this allows a small window where we release the last reference but haven't quite got to this stage yet and so something will try to take a reference in scsi_request_fn and oops. It's very rare, but we had a report here, so we're pushing this as a bug fix The actual fix is to set request_queue->queuedata to NULL in scsi_remove_device() before we drop the reference. This causes correct automatic rejects from scsi_request_fn as people who hold additional references try to submit work and prevents anything from getting a new reference to the sdev that way. Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-04-24[SCSI] scsi_dh: fix reference counting in scsi_dh_activate error pathMike Snitzer1-3/+6
Commit db422318cbca55168cf965f655471dbf8be82433 ([SCSI] scsi_dh: propagate SCSI device deletion) introduced a regression where the device reference is not dropped prior to scsi_dh_activate's early return from the error path. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org # 2.6.38 Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-04-24[SCSI] mpt2sas: prevent heap overflows and unchecked readsDan Rosenberg1-2/+21
At two points in handling device ioctls via /dev/mpt2ctl, user-supplied length values are used to copy data from userspace into heap buffers without bounds checking, allowing controllable heap corruption and subsequently privilege escalation. Additionally, user-supplied values are used to determine the size of a copy_to_user() as well as the offset into the buffer to be read, with no bounds checking, allowing users to read arbitrary kernel memory. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: stable@kernel.org Acked-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-04-24libata: ahci_start_engine compliant to AHCI specJian Peng1-0/+21
At the end of section 10.1 of AHCI spec (rev 1.3), it states Software shall not set PxCMD.ST to 1 until it is determined that a functoinal device is present on the port as determined by PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h Even though most AHCI host controller works without this check, specific controller will fail under this condition. Signed-off-by: Jian Peng <jipeng2005@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ata: pata_at91.c bugfix for initial_timing initialisationIgor Plyatov1-2/+12
The "struct ata_timing" must contain 10 members, but ".dmack_hold" member was forgotten for "initial_timing" initialisation. This patch fixes such a problem. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ata: pata_at91.c bugfix for high master clockIgor Plyatov1-1/+7
The AT91SAM9 microcontrollers with master clock higher then 105 MHz and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and driver does not detect ATA device. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ahci: AHCI-mode SATA patch for Intel Panther Point DeviceIDsSeth Heasley1-0/+6
The previously submitted patch was word-wrapped. This patch adds the AHCI-mode SATA DeviceIDs for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ata_piix: IDE-mode SATA patch for Intel Panther Point DeviceIDsSeth Heasley1-0/+8
The previously submitted patch was word-wrapped. This patch adds the IDE-mode SATA DeviceIDs for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24libata: Pioneer DVR-216D can't do SETXFERJeff Mahoney1-0/+1
Commit 4a5610a04d415ed94af75bb1159d2621d62c8328 fixed an issue with the Pioneer DVR-212D not handling SETXFER correctly. An openSUSE user reported a similar issue with his DVR-216D that the NOSETXFER horkage worked around for him as well. This patch adds the DVR-216D (1.08) to the horkage list for NOSETXFER. The issue was reported at: https://bugzilla.novell.com/show_bug.cgi?id=679143 Reported-by: Volodymyr Kyrychenko <vladimir.kirichenko@gmail.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ahci: don't enable port irq before handler is registeredMaxime Bizon2-3/+16
The ahci_pmp_attach() & ahci_pmp_detach() unmask port irqs, but they are also called during port initialization, before ahci host irq handler is registered. On ce4100 platform, this sometimes triggers "irq 4: nobody cared" message when loading driver. Fixed this by not touching the register if the port is in frozen state, and mark all uninitialized port as frozen. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Acked-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65Tejun Heo2-3/+5
NVIDIA mcp65 familiy of controllers cause command timeouts when DIPM is used. Implement ATA_FLAG_NO_DIPM and apply it. This problem was reported by Stefan Bader in the following thread. http://thread.gmane.org/gmane.linux.ide/48841 stable: applicable to 2.6.37 and 38. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stefan Bader <stefan.bader@canonical.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ahci: EM supported message type sysfs attributeHannes Reinecke2-0/+26
This patch adds an sysfs attribute 'em_message_supported' to the ahci host device which prints out the supported enclosure management message types. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24Merge branch 'pm-fixes' of ↵Linus Torvalds2-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Add missing syscore_suspend() and syscore_resume() calls PM: Fix error code paths executed after failing syscore_suspend()
2011-04-23Merge branch 'tty-linus' of ↵Linus Torvalds3-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty/n_gsm: fix bug in CRC calculation for gsm1 mode serial/imx: read cts state only after acking cts change irq parport_pc.c: correctly release the requested region for the IT887x
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-12 17:00:37 +0300