summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-02-04iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not builtBartosz Golaszewski1-1/+2
commit 9def3b1a07c41e21c68a0eb353e3e569fdd1d2b1 upstream. Since commit c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths") dmar.c needs struct iommu_device to be selected. We can drop this dependency by not dereferencing struct iommu_device if IOMMU_API is not selected and by reusing the information stored in iommu->drhd->ignored instead. This fixes the following build error when IOMMU_API is not selected: drivers/iommu/dmar.c: In function ‘free_iommu’: drivers/iommu/dmar.c:1139:41: error: ‘struct iommu_device’ has no member named ‘ops’ 1139 | if (intel_iommu_enabled && iommu->iommu.ops) { ^ Fixes: c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20201013073055.11262-1-brgl@bgdev.pl Signed-off-by: Joerg Roedel <jroedel@suse.de> [ - context change due to moving drivers/iommu/dmar.c to drivers/iommu/intel/dmar.c - set the drhr in the iommu like in upstream commit b1012ca8dc4f ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu") ] Signed-off-by: Filippo Sironi <sironi@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04iommu/vt-d: Gracefully handle DMAR units with no supported address widthsDavid Woodhouse1-16/+26
commit c40aaaac1018ff1382f2d35df5129a6bcea3df6b upstream. Instead of bailing out completely, such a unit can still be used for interrupt remapping. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/linux-iommu/549928db2de6532117f36c9c810373c14cf76f51.camel@infradead.org/ Signed-off-by: Joerg Roedel <jroedel@suse.de> [ - context change due to moving drivers/iommu/dmar.c to drivers/iommu/intel/dmar.c - remove the unused err_unmap label - use iommu->iommu_dev instead of iommu->iommu.ops to decide whether when freeing ] Signed-off-by: Filippo Sironi <sironi@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04can: dev: prevent potential information leak in can_fill_info()Dan Carpenter1-1/+1
[ Upstream commit b552766c872f5b0d90323b24e4c9e8fa67486dd5 ] The "bec" struct isn't necessarily always initialized. For example, the mcp251xfd_get_berr_counter() function doesn't initialize anything if the interface is down. Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters") Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-04RDMA/cxgb4: Fix the reported max_recv_sge valueKamal Heib1-1/+1
[ Upstream commit a372173bf314d374da4dd1155549d8ca7fc44709 ] The max_recv_sge value is wrongly reported when calling query_qp, This is happening due to a typo when assigning the max_recv_sge value, the value of sq_max_sges was assigned instead of rq_max_sges. Fixes: 3e5c02c9ef9a ("iw_cxgb4: Support query_qp() verb") Link: https://lore.kernel.org/r/20210114191423.423529-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-04mt7601u: fix rx buffer refcountingLorenzo Bianconi1-2/+1
commit d24c790577ef01bfa01da2b131313a38c843a634 upstream. Fix the following crash due to erroneous page refcounting: [ 32.445919] BUG: Bad page state in process swapper/1 pfn:11f65a [ 32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a [ 32.449605] flags: 0x8000000000000000() [ 32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000 [ 32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 [ 32.452999] page dumped because: nonzero mapcount [ 32.453888] Modules linked in: [ 32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976 [ 32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014 [ 32.457157] Call Trace: [ 32.457636] <IRQ> [ 32.457993] dump_stack+0x77/0x97 [ 32.458576] bad_page.cold+0x65/0x96 [ 32.459198] get_page_from_freelist+0x46a/0x11f0 [ 32.460008] __alloc_pages_nodemask+0x10a/0x2b0 [ 32.460794] mt7601u_rx_tasklet+0x651/0x720 [ 32.461505] tasklet_action_common.constprop.0+0x6b/0xd0 [ 32.462343] __do_softirq+0x152/0x46c [ 32.462928] asm_call_irq_on_stack+0x12/0x20 [ 32.463610] </IRQ> [ 32.463953] do_softirq_own_stack+0x5b/0x70 [ 32.464582] irq_exit_rcu+0x9f/0xe0 [ 32.465028] common_interrupt+0xae/0x1a0 [ 32.465536] asm_common_interrupt+0x1e/0x40 [ 32.466071] RIP: 0010:default_idle+0x18/0x20 [ 32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246 [ 32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [ 32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd [ 32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001 [ 32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000 [ 32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 32.474139] ? default_idle_call+0x4d/0x200 [ 32.474681] default_idle_call+0x74/0x200 [ 32.475192] do_idle+0x1d5/0x250 [ 32.475612] cpu_startup_entry+0x19/0x20 [ 32.476114] secondary_startup_64_no_verify+0xb0/0xbb [ 32.476765] Disabling lock debugging due to kernel taint Fixes: c869f77d6abb ("add mt7601u driver") Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04mt7601u: fix kernel crash unplugging the deviceLorenzo Bianconi1-1/+1
commit 0acb20a5438c36e0cf2b8bf255f314b59fcca6ef upstream. The following crash log can occur unplugging the usb dongle since, after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will always fail resulting in a skb kfree while the skb has been already queued. Fix the issue enqueuing the skb only if usb_submit_urb() succeed. Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015 Workqueue: usb_hub_wq hub_event RIP: 0010:skb_trim+0x2c/0x30 RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206 RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300 RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4 R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0 Call Trace: mt7601u_tx_status+0x3e/0xa0 [mt7601u] mt7601u_dma_cleanup+0xca/0x110 [mt7601u] mt7601u_cleanup+0x22/0x30 [mt7601u] mt7601u_disconnect+0x22/0x60 [mt7601u] usb_unbind_interface+0x8a/0x270 ? kernfs_find_ns+0x35/0xd0 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 bus_remove_device+0xdb/0x140 device_del+0x18b/0x430 ? kobject_put+0x98/0x1d0 usb_disable_device+0xc6/0x1f0 usb_disconnect.cold+0x7e/0x20a hub_event+0xbf3/0x1870 process_one_work+0x1b6/0x350 worker_thread+0x53/0x3e0 ? process_one_work+0x350/0x350 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem familyGiacinto Cifelli1-0/+1
commit 7e0e63d09516e96994c879f07c5a3c3269d7015e upstream. Bus 003 Device 009: ID 1e2d:006f Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006f bcdDevice 0.00 iManufacturer 3 Cinterion Wireless Modules iProduct 2 PLSx3 iSerial 4 fa3c1419 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 303 bNumInterfaces 9 bConfigurationValue 1 iConfiguration 1 Cinterion Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 3 CDC Union: bMasterInterface 2 bSlaveInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 4 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 5 CDC Union: bMasterInterface 4 bSlaveInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 6 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 7 CDC Union: bMasterInterface 6 bSlaveInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: stable@vger.kernel.org Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20210120045650.10855-1-gciofono@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04ACPI: sysfs: Prefer "compatible" modaliasKai-Heng Feng1-14/+6
commit 36af2d5c4433fb40ee2af912c4ac0a30991aecfc upstream. Commit 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present") may create two "MODALIAS=" in one uevent file if specific conditions are met. This breaks systemd-udevd, which assumes each "key" in one uevent file to be unique. The internal implementation of systemd-udevd overwrites the first MODALIAS with the second one, so its kmod rule doesn't load the driver for the first MODALIAS. So if both the ACPI modalias and the OF modalias are present, use the latter to ensure that there will be only one MODALIAS. Link: https://github.com/systemd/systemd/pull/18163 Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: 4.1+ <stable@vger.kernel.org> # 4.1+ [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30xen-blkback: set ring->xenblkd to NULL after kthread_stop()Pawel Wieczorkiewicz1-0/+1
commit 1c728719a4da6e654afb9cc047164755072ed7c9 upstream. When xen_blkif_disconnect() is called, the kernel thread behind the block interface is stopped by calling kthread_stop(ring->xenblkd). The ring->xenblkd thread pointer being non-NULL determines if the thread has been already stopped. Normally, the thread's function xen_blkif_schedule() sets the ring->xenblkd to NULL, when the thread's main loop ends. However, when the thread has not been started yet (i.e. wake_up_process() has not been called on it), the xen_blkif_schedule() function would not be called yet. In such case the kthread_stop() call returns -EINTR and the ring->xenblkd remains dangling. When this happens, any consecutive call to xen_blkif_disconnect (for example in frontend_changed() callback) leads to a kernel crash in kthread_stop() (e.g. NULL pointer dereference in exit_creds()). This is XSA-350. Cc: <stable@vger.kernel.org> # 4.12 Fixes: a24fa22ce22a ("xen/blkback: don't use xen_blkif_get() in xen-blkback kthread") Reported-by: Olivier Benjamin <oliben@amazon.com> Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de> Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de> Reviewed-by: Julien Grall <jgrall@amazon.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> [iwamatsu: change from ring to blkif] Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30sh_eth: Fix power down vs. is_opened flag orderingGeert Uytterhoeven1-2/+2
commit f6a2e94b3f9d89cb40771ff746b16b5687650cbb upstream. sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30xhci: make sure TRB is fully written before giving it to the controllerMathias Nyman1-0/+2
commit 576667bad341516edc4e18eb85acb0a2b4c9c9d9 upstream. Once the command ring doorbell is rung the xHC controller will parse all command TRBs on the command ring that have the cycle bit set properly. If the driver just started writing the next command TRB to the ring when hardware finished the previous TRB, then HW might fetch an incomplete TRB as long as its cycle bit set correctly. A command TRB is 16 bytes (128 bits) long. Driver writes the command TRB in four 32 bit chunks, with the chunk containing the cycle bit last. This does however not guarantee that chunks actually get written in that order. This was detected in stress testing when canceling URBs with several connected USB devices. Two consecutive "Set TR Dequeue pointer" commands got queued right after each other, and the second one was only partially written when the controller parsed it, causing the dequeue pointer to be set to bogus values. This was seen as error messages: "Mismatch between completed Set TR Deq Ptr command & xHCI internal state" Solution is to add a write memory barrier before writing the cycle bit. Cc: <stable@vger.kernel.org> Tested-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210115161907.2875631-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30usb: bdc: Make bdc pci driver depend on BROKENPatrik Jakobsson1-1/+1
commit ef02684c4e67d8c35ac83083564135bc7b1d3445 upstream. The bdc pci driver is going to be removed due to it not existing in the wild. This patch turns off compilation of the driver so that stable kernels can also pick up the change. This helps the out-of-tree facetimehd webcam driver as the pci id conflicts with bdc. Cc: Al Cooper <alcooperx@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://lore.kernel.org/r/20210118203615.13995-1-patrik.r.jakobsson@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30ehci: fix EHCI host controller initialization sequenceEugene Korenevsky1-0/+12
commit 280a9045bb18833db921b316a5527d2b565e9f2e upstream. According to EHCI spec, EHCI HC clears USBSTS.HCHalted whenever USBCMD.RS=1. However, it is a good practice to wait some time after setting USBCMD.RS (approximately 100ms) until USBSTS.HCHalted become zero. Without this waiting, VirtualBox's EHCI virtual HC accidentally hangs (see BugLink). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211095 Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210110173609.GA17313@himera.home Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30iio: ad5504: Fix setting power-down stateLars-Peter Clausen1-2/+2
commit efd597b2839a9895e8a98fcb0b76d2f545802cd4 upstream. The power-down mask of the ad5504 is actually a power-up mask. Meaning if a bit is set the corresponding channel is powered up and if it is not set the channel is powered down. The driver currently has this the wrong way around, resulting in the channel being powered up when requested to be powered down and vice versa. Fixes: 3bbbf150ffde ("staging:iio:dac:ad5504: Use strtobool for boolean values") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201209104649.5794-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30can: dev: can_restart: fix use after free bugVincent Mailhol1-2/+2
[ Upstream commit 03f16c5075b22c8902d2af739969e878b0879c94 ] After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30drm/nouveau/i2c/gm200: increase width of aux semaphore owner fieldsBen Skeggs1-4/+4
[ Upstream commit ba6e9ab0fcf3d76e3952deb12b5f993991621d9c ] Noticed while debugging GA102. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30drm/nouveau/bios: fix issue shadowing expansion ROMsBen Skeggs1-1/+1
[ Upstream commit 402a89660e9dc880710b12773076a336c9dab3d7 ] This issue has generally been covered up by the presence of additional expansion ROMs after the ones we're interested in, with header fetches of subsequent images loading enough of the ROM to hide the issue. Noticed on GA102, which lacks a type 0x70 image compared to TU102,. [ 906.364197] nouveau 0000:09:00.0: bios: 00000000: type 00, 65024 bytes [ 906.381205] nouveau 0000:09:00.0: bios: 0000fe00: type 03, 91648 bytes [ 906.405213] nouveau 0000:09:00.0: bios: 00026400: type e0, 22016 bytes [ 906.410984] nouveau 0000:09:00.0: bios: 0002ba00: type e0, 366080 bytes vs [ 22.961901] nouveau 0000:09:00.0: bios: 00000000: type 00, 60416 bytes [ 22.984174] nouveau 0000:09:00.0: bios: 0000ec00: type 03, 71168 bytes [ 23.010446] nouveau 0000:09:00.0: bios: 00020200: type e0, 48128 bytes [ 23.028220] nouveau 0000:09:00.0: bios: 0002be00: type e0, 140800 bytes [ 23.080196] nouveau 0000:09:00.0: bios: 0004e400: type 70, 7168 bytes Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30scsi: ufs: Correct the LUN used in eh_device_reset_handler() callbackCan Guo1-7/+4
[ Upstream commit 35fc4cd34426c242ab015ef280853b7bff101f48 ] Users can initiate resets to specific SCSI device/target/host through IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host _reset_handler() callbacks is initialized with a request whose tag is -1. In this case it is not right for eh_device_reset_handler() callback to count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI device associated with the SCSI cmd. Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30dm: avoid filesystem lookup in dm_get_dev_t()Hannes Reinecke1-3/+12
commit 809b1e4945774c9ec5619a8f4e2189b7b3833c0c upstream. This reverts commit 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") dm_get_dev_t() is just used to convert an arbitrary 'path' string into a dev_t. It doesn't presume that the device is present; that check will be done later, as the only caller is dm_get_device(), which does a dm_get_table_device() later on, which will properly open the device. So if the path string already _is_ in major:minor representation we can convert it directly, avoiding a recursion into the filesystem to lookup the block device. This avoids a hang in multipath_message() when the filesystem is inaccessible. Fixes: 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") Cc: stable@vger.kernel.org Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30ACPI: scan: Make acpi_bus_get_device() clear return pointer on errorHans de Goede1-0/+2
commit 78a18fec5258c8df9435399a1ea022d73d3eceb9 upstream. Set the acpi_device pointer which acpi_bus_get_device() returns-by- reference to NULL on errors. We've recently had 2 cases where callers of acpi_bus_get_device() did not properly error check the return value, so set the returned- by-reference acpi_device pointer to NULL, because at least some callers of acpi_bus_get_device() expect that to be done on errors. [ rjw: This issue was exposed by commit 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists") which caused it to be much more likely to occur on some systems, but the real defect had been introduced by an earlier commit. ] Fixes: 40e7fcb19293 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA") Fixes: bcfcd409d4db ("usb: split code locating ACPI companion into port and device") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Diagnosed-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: All applicable <stable@vger.kernel.org> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23spi: cadence: cache reference clock rate during probeMichael Hennerich1-2/+4
commit 4d163ad79b155c71bf30366dc38f8d2502f78844 upstream. The issue is that using SPI from a callback under the CCF lock will deadlock, since this code uses clk_get_rate(). Fixes: c474b38665463 ("spi: Add driver for Cadence SPI controller") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210114154217.51996-1-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM requestAndrey Zhizhikin1-1/+1
[ Upstream commit e56b3d94d939f52d46209b9e1b6700c5bfff3123 ] MSFT ActiveSync implementation requires that the size of the response for incoming query is to be provided in the request input length. Failure to set the input size proper results in failed request transfer, where the ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L) error. Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size of the response in order for the ActiveSync to properly respond to the request. Fixes: 039ee17d1baa ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23netxen_nic: fix MSI/MSI-x interruptsManish Chopra1-6/+1
[ Upstream commit a2bc221b972db91e4be1970e776e98f16aa87904 ] For all PCI functions on the netxen_nic adapter, interrupt mode (INTx or MSI) configuration is dependent on what has been configured by the PCI function zero in the shared interrupt register, as these adapters do not support mixed mode interrupts among the functions of a given adapter. Logic for setting MSI/MSI-x interrupt mode in the shared interrupt register based on PCI function id zero check is not appropriate for all family of netxen adapters, as for some of the netxen family adapters PCI function zero is not really meant to be probed/loaded in the host but rather just act as a management function on the device, which caused all the other PCI functions on the adapter to always use legacy interrupt (INTx) mode instead of choosing MSI/MSI-x interrupt mode. This patch replaces that check with port number so that for all type of adapters driver attempts for MSI/MSI-x interrupt modes. Fixes: b37eb210c076 ("netxen_nic: Avoid mixed mode interrupts") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20210107101520.6735-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23net: cdc_ncm: correct overhead in delayed_ndp_sizeJouni K. Seppänen1-2/+6
commit 7a68d725e4ea384977445e0bcaed3d7de83ab5b3 upstream. Aligning to tx_ndp_modulus is not sufficient because the next align call can be cdc_ncm_align_tail, which can add up to ctx->tx_modulus + ctx->tx_remainder - 1 bytes. This used to lead to occasional crashes on a Huawei 909s-120 LTE module as follows: - the condition marked /* if there is a remaining skb [...] */ is true so the swaps happen - skb_out is set from ctx->tx_curr_skb - skb_out->len is exactly 0x3f52 - ctx->tx_curr_size is 0x4000 and delayed_ndp_size is 0xac (note that the sum of skb_out->len and delayed_ndp_size is 0x3ffe) - the for loop over n is executed once - the cdc_ncm_align_tail call marked /* align beginning of next frame */ increases skb_out->len to 0x3f56 (the sum is now 0x4002) - the condition marked /* check if we had enough room left [...] */ is false so we break out of the loop - the condition marked /* If requested, put NDP at end of frame. */ is true so the NDP is written into skb_out - now skb_out->len is 0x4002, so padding_count is minus two interpreted as an unsigned number, which is used as the length argument to memset, leading to a crash with various symptoms but usually including > Call Trace: > <IRQ> > cdc_ncm_fill_tx_frame+0x83a/0x970 [cdc_ncm] > cdc_mbim_tx_fixup+0x1d9/0x240 [cdc_mbim] > usbnet_start_xmit+0x5d/0x720 [usbnet] The cdc_ncm_align_tail call first aligns on a ctx->tx_modulus boundary (adding at most ctx->tx_modulus-1 bytes), then adds ctx->tx_remainder bytes. Alternatively, the next alignment call can occur in cdc_ncm_ndp16 or cdc_ncm_ndp32, in which case at most ctx->tx_ndp_modulus-1 bytes are added. A similar problem has occurred before, and the code is nontrivial to reason about, so add a guard before the crashing call. By that time it is too late to prevent any memory corruption (we'll have written past the end of the buffer already) but we can at least try to get a warning written into an on-disk log by avoiding the hard crash caused by padding past the buffer with a huge number of zeros. Signed-off-by: Jouni K. Seppänen <jks@iki.fi> Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209407 Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> [jks@iki.fi: backport to 4.4.y, 4.9.y] Signed-off-by: Jouni K. Seppänen <jks@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23iio: buffer: Fix demux updateNuno Sá1-3/+3
commit 19ef7b70ca9487773c29b449adf0c70f540a0aab upstream When updating the buffer demux, we will skip a scan element from the device in the case `in_ind != out_ind` and we enter the while loop. in_ind should only be refreshed with `find_next_bit()` in the end of the loop. Note, to cause problems we need a situation where we are skippig over an element (channel not enabled) that happens to not have the same size as the next element. Whilst this is a possible situation we haven't actually identified any cases in mainline where it happens as most drivers have consistent channel storage sizes with the exception of the timestamp which is the last element and hence never skipped over. Fixes: 5ada4ea9be16 ("staging:iio: add demux optionally to path from device to buffer") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20201112144323.28887-1-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23usb: ohci: Make distrust_firmware param default to falseHamish Martin1-1/+1
commit c4005a8f65edc55fb1700dfc5c1c3dc58be80209 upstream. The 'distrust_firmware' module parameter dates from 2004 and the USB subsystem is a lot more mature and reliable now than it was then. Alter the default to false now. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200910212512.16670-2-hamish.martin@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grpDinghao Liu1-0/+3
commit a306aba9c8d869b1fdfc8ad9237f1ed718ea55e6 upstream. If usnic_ib_qp_grp_create() fails at the first call, dev_list will not be freed on error, which leads to memleak. Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver") Link: https://lore.kernel.org/r/20201226074248.2893-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23Input: uinput - avoid FF flush when destroying deviceDmitry Torokhov2-3/+28
commit e8b95728f724797f958912fd9b765a695595d3a6 upstream. Normally, when input device supporting force feedback effects is being destroyed, we try to "flush" currently playing effects, so that the physical device does not continue vibrating (or executing other effects). Unfortunately this does not work well for uinput as flushing of the effects deadlocks with the destroy action: - if device is being destroyed because the file descriptor is being closed, then there is noone to even service FF requests; - if device is being destroyed because userspace sent UI_DEV_DESTROY, while theoretically it could be possible to service FF requests, userspace is unlikely to do so (they'd need to make sure FF handling happens on a separate thread) even if kernel solves the issue with FF ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex. To avoid lockups like the one below, let's install a custom input device flush handler, and avoid trying to flush force feedback effects when we destroying the device, and instead rely on uinput to shut off the device properly. NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 ... <<EOE>> [<ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40 [<ffffffff810e633d>] complete+0x1d/0x50 [<ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput] [<ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput] [<ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput] [<ffffffff815d91ad>] erase_effect+0xad/0xf0 [<ffffffff815d929d>] flush_effects+0x4d/0x90 [<ffffffff815d4cc0>] input_flush_device+0x40/0x60 [<ffffffff815daf1c>] evdev_cleanup+0xac/0xc0 [<ffffffff815daf5b>] evdev_disconnect+0x2b/0x60 [<ffffffff815d74ac>] __input_unregister_device+0xac/0x150 [<ffffffff815d75f7>] input_unregister_device+0x47/0x70 [<ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput] [<ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput] [<ffffffff811231ab>] ? do_futex+0x12b/0xad0 [<ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff81337553>] ? security_file_ioctl+0x43/0x60 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Reported-by: Clément VUCHENER <clement.vuchener@gmail.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23net: ethernet: fs_enet: Add missing MODULE_LICENSEMichael Ellerman2-0/+2
[ Upstream commit 445c6198fe7be03b7d38e66fe8d4b3187bc251d4 ] Since commit 1d6cd3929360 ("modpost: turn missing MODULE_LICENSE() into error") the ppc32_allmodconfig build fails with: ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-fec.o ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-bitbang.o Add the missing MODULE_LICENSEs to fix the build. Both files include a copyright header indicating they are GPL v2. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-23misdn: dsp: select CONFIG_BITREVERSEArnd Bergmann1-0/+1
[ Upstream commit 51049bd903a81307f751babe15a1df8d197884e8 ] Without this, we run into a link error arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o: in function `dsp_audio_generate_law_tables': (.text+0x30c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o:(.text+0x5e4): more undefined references to `byte_rev_table' follow Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-23ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pramRasmus Villemoes1-1/+8
[ Upstream commit 887078de2a23689e29d6fa1b75d7cbc544c280be ] Table 8-53 in the QUICC Engine Reference manual shows definitions of fields up to a size of 192 bytes, not just 128. But in table 8-111, one does find the text Base Address of the Global Transmitter Parameter RAM Page. [...] The user needs to allocate 128 bytes for this page. The address must be aligned to the page size. I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual; they both have this inconsistency (and the table numbers are the same). Adding a bit of debug printing, on my board the struct ucc_geth_tx_global_pram is allocated at offset 0x880, while the (opaque) ucc_geth_thread_data_tx gets allocated immediately afterwards, at 0x900. So whatever the engine writes into the thread data overlaps with the tail of the global tx pram (and devmem says that something does get written during a simple ping). I haven't observed any failure that could be attributed to this, but it seems to be the kind of thing that would be extremely hard to debug. So extend the struct definition so that we do allocate 192 bytes. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17iommu/intel: Fix memleak in intel_irq_remapping_allocDinghao Liu1-0/+2
commit ff2b46d7cff80d27d82f7f3252711f4ca1666129 upstream. When irq_domain_get_irq_data() or irqd_cfg() fails at i == 0, data allocated by kzalloc() has not been freed before returning, which leads to memleak. Fixes: b106ee63abcc ("irq_remapping/vt-d: Enhance Intel IR driver to support hierarchical irqdomains") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210105051837.32118-1-dinghao.liu@zju.edu.cn Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17block: rsxx: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit 36a106a4c1c100d55ba3d32a21ef748cfcd4fa99 upstream. Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config': config.c:(.text+0x124): undefined reference to `crc32_le' Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17wil6210: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit e186620d7bf11b274b985b839c38266d7918cc05 upstream. Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify': fw.c:(.text+0x74c): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow Fixes: 151a9706503f ("wil6210: firmware download") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get()Colin Ian King1-6/+3
commit 943bdd0cecad06da8392a33093230e30e501eccc upstream. Currently there is an unlikely case where cpufreq_cpu_get() returns a NULL policy and this will cause a NULL pointer dereference later on. Fix this by passing the policy to transition_frequency_fidvid() from the caller and hence eliminating the need for the cpufreq_cpu_get() and cpufreq_cpu_put(). Thanks to Viresh Kumar for suggesting the fix. Addresses-Coverity: ("Dereference null return") Fixes: b43a7ffbf33b ("cpufreq: Notify all policy->cpus in cpufreq_notify_transition()") Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17spi: pxa2xx: Fix use-after-free on unbindLukas Wunner1-2/+1
commit 5626308bb94d9f930aa5f7c77327df4c6daa7759 upstream pxa2xx_spi_remove() accesses the driver's private data after calling spi_unregister_controller() even though that function releases the last reference on the spi_controller and thereby frees the private data. Fix by switching over to the new devm_spi_alloc_master/slave() helper which keeps the private data accessible until the driver has unbound. Fixes: 32e5b57232c0 ("spi: pxa2xx: Fix controller unregister order") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <stable@vger.kernel.org> # v2.6.17+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation Cc: <stable@vger.kernel.org> # v2.6.17+: 32e5b57232c0: spi: pxa2xx: Fix controller unregister order Cc: <stable@vger.kernel.org> # v2.6.17+ Link: https://lore.kernel.org/r/5764b04d4a6e43069ebb7808f64c2f774ac6f193.1607286887.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17scsi: target: Fix XCOPY NAA identifier lookupDavid Disseldorp2-49/+71
[ Upstream commit 2896c93811e39d63a4d9b63ccf12a8fbc226e5e4 ] When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17xcopy: loop over devices using idr helperMike Christie1-29/+41
[ Upstream commit 6906d008b4b06e42cad393ac25bec76fbf31fabd ] This converts the xcopy code to use the idr helper. The next patch will drop the g_device_list and make g_device_mutex local to the target_core_device.c file. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17target: use XCOPY segment descriptor CSCD IDsDavid Disseldorp1-31/+48
[ Upstream commit 66640d35c1e4ef3c96ba5edb3c5e2ff8ab812e7a ] The XCOPY specification in SPC4r37 states that the XCOPY source and destination device(s) should be derived from the copy source and copy destination (CSCD) descriptor IDs in the XCOPY segment descriptor. The CSCD IDs are generally (for block -> block copies), indexes into the corresponding CSCD descriptor list, e.g. ================================= EXTENDED COPY Header ================================= CSCD Descriptor List - entry 0 + LU ID <--------------<------------------\ - entry 1 | + LU ID <______________<_____________ | ================================= | | Segment Descriptor List | | - segment 0 | | + src CSCD ID = 0 --------->---------+----/ + dest CSCD ID = 1 ___________>______| + len + src lba + dest lba ================================= Currently LIO completely ignores the src and dest CSCD IDs in the Segment Descriptor List, and instead assumes that the first entry in the CSCD list corresponds to the source, and the second to the destination. This commit removes this assumption, by ensuring that the Segment Descriptor List is parsed prior to processing the CSCD Descriptor List. CSCD Descriptor List processing is modified to compare the current list index with the previously obtained src and dest CSCD IDs. Additionally, XCOPY requests where the src and dest CSCD IDs refer to the CSCD Descriptor List entry can now be successfully processed. Fixes: cbf031f ("target: Add support for EXTENDED_COPY copy offload") Link: https://bugzilla.kernel.org/show_bug.cgi?id=191381 Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17target: simplify XCOPY wwn->se_dev lookup helperDavid Disseldorp1-19/+9
[ Upstream commit 94aae4caacda89a1bdb7198b260f4ca3595b7ed7 ] target_xcopy_locate_se_dev_e4() is used to locate an se_dev, based on the WWN provided with the XCOPY request. Remove a couple of unneeded arguments, and rely on the caller for the src/dst test. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17target: bounds check XCOPY segment descriptor listDavid Disseldorp1-2/+12
[ Upstream commit af9f62c1686268c0517b289274d38f3a03bebd2a ] Check the length of the XCOPY request segment descriptor list against the value advertised via the MAXIMUM SEGMENT DESCRIPTOR COUNT field in the RECEIVE COPY OPERATING PARAMETERS response. spc4r37 6.4.3.5 states: If the number of segment descriptors exceeds the allowed number, the copy manager shall terminate the command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to TOO MANY SEGMENT DESCRIPTORS. This functionality is testable using the libiscsi ExtendedCopy.DescrLimits test. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17target: add XCOPY target/segment desc sense codesDavid Disseldorp1-0/+24
[ Upstream commit e864212078ded276bdb272b2e0ee6a979357ca8a ] As defined in http://www.t10.org/lists/asc-num.htm. To be used during validation of XCOPY target and segment descriptor lists. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12Revert "device property: Keep secondary firmware node secondary by type"Bard Liao1-1/+1
commit 47f4469970d8861bc06d2d4d45ac8200ff07c693 upstream. While commit d5dcce0c414f ("device property: Keep secondary firmware node secondary by type") describes everything correct in its commit message, the change it made does the opposite and original commit c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") was fully correct. Revert the former one here and improve documentation in the next patch. Fixes: d5dcce0c414f ("device property: Keep secondary firmware node secondary by type") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12USB: serial: keyspan_pda: remove unused variableJohan Hovold1-2/+0
Remove an unused variable which was mistakingly left by commit 37faf5061541 ("USB: serial: keyspan_pda: fix write-wakeup use-after-free") and only removed by a later change. This is needed to suppress a W=1 warning about the unused variable in the stable trees that the build bots triggers. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12usb: gadget: configfs: Preserve function ordering after bind failureChandana Kishori Chiluveru1-2/+2
commit 6cd0fe91387917be48e91385a572a69dfac2f3f7 upstream. When binding the ConfigFS gadget to a UDC, the functions in each configuration are added in list order. However, if usb_add_function() fails, the failed function is put back on its configuration's func_list and purge_configs_funcs() is called to further clean up. purge_configs_funcs() iterates over the configurations and functions in forward order, calling unbind() on each of the previously added functions. But after doing so, each function gets moved to the tail of the configuration's func_list. This results in reshuffling the original order of the functions within a configuration such that the failed function now appears first even though it may have originally appeared in the middle or even end of the list. At this point if the ConfigFS gadget is attempted to re-bind to the UDC, the functions will be added in a different order than intended, with the only recourse being to remove and relink the functions all over again. An example of this as follows: ln -s functions/mass_storage.0 configs/c.1 ln -s functions/ncm.0 configs/c.1 ln -s functions/ffs.adb configs/c.1 # oops, forgot to start adbd echo "<udc device>" > UDC # fails start adbd echo "<udc device>" > UDC # now succeeds, but... # bind order is # "ADB", mass_storage, ncm [30133.118289] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30133.119875] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30133.119974] using random self ethernet address [30133.120002] using random host ethernet address [30133.139604] usb0: HOST MAC 3e:27:46:ba:3e:26 [30133.140015] usb0: MAC 6e:28:7e:42:66:6a [30133.140062] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30133.140081] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 --> -19 [30133.140098] configfs-gadget gadget: unbind function 'Mass Storage Function'/ffffff810af87200 [30133.140119] configfs-gadget gadget: unbind function 'cdc_network'/ffffff80f48d1a00 [30133.173201] configfs-gadget a600000.dwc3: failed to start g1: -19 [30136.661933] init: starting service 'adbd'... [30136.700126] read descriptors [30136.700413] read strings [30138.574484] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30138.575497] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30138.575554] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30138.575631] using random self ethernet address [30138.575660] using random host ethernet address [30138.595338] usb0: HOST MAC 2e:cf:43:cd:ca:c8 [30138.597160] usb0: MAC 6a:f0:9f:ee:82:a0 [30138.791490] configfs-gadget gadget: super-speed config #1: c Fix this by reversing the iteration order of the functions in purge_config_funcs() when unbinding them, and adding them back to the config's func_list at the head instead of the tail. This ensures that we unbind and unwind back to the original list order. Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface") Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201229224443.31623-1-jackp@codeaurora.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12usb: gadget: Fix spinlock lockup on usb_function_deactivateSriharsha Allenki1-2/+8
commit 5cc35c224a80aa5a5a539510ef049faf0d6ed181 upstream. There is a spinlock lockup as part of composite_disconnect when it tries to acquire cdev->lock as part of usb_gadget_deactivate. This is because the usb_gadget_deactivate is called from usb_function_deactivate with the same spinlock held. This would result in the below call stack and leads to stall. rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: 3-...0: (1 GPs behind) idle=162/1/0x4000000000000000 softirq=10819/10819 fqs=2356 (detected by 2, t=5252 jiffies, g=20129, q=3770) Task dump for CPU 3: task:uvc-gadget_wlhe state:R running task stack: 0 pid: 674 ppid: 636 flags:0x00000202 Call trace: __switch_to+0xc0/0x170 _raw_spin_lock_irqsave+0x84/0xb0 composite_disconnect+0x28/0x78 configfs_composite_disconnect+0x68/0x70 usb_gadget_disconnect+0x10c/0x128 usb_gadget_deactivate+0xd4/0x108 usb_function_deactivate+0x6c/0x80 uvc_function_disconnect+0x20/0x58 uvc_v4l2_release+0x30/0x88 v4l2_release+0xbc/0xf0 __fput+0x7c/0x230 ____fput+0x14/0x20 task_work_run+0x88/0x140 do_notify_resume+0x240/0x6f0 work_pending+0x8/0x200 Fix this by doing an unlock on cdev->lock before the usb_gadget_deactivate call from usb_function_deactivate. The same lockup can happen in the usb_gadget_activate path. Fix that path as well. Reported-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/linux-usb/20201102094936.GA29581@b29397-desktop/ Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201202130220.24926-1-sallenki@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12USB: gadget: legacy: fix return error code in acm_ms_bind()Yang Yingliang1-1/+3
commit c91d3a6bcaa031f551ba29a496a8027b31289464 upstream. If usb_otg_descriptor_alloc() failed, it need return ENOMEM. Fixes: 578aa8a2b12c ("usb: gadget: acm_ms: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201117092955.4102785-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12usb: gadget: function: printer: Fix a memory leak for interface descriptorZqiang1-0/+1
commit 2cc332e4ee4febcbb685e2962ad323fe4b3b750a upstream. When printer driver is loaded, the printer_func_bind function is called, in this function, the interface descriptor be allocated memory, if after that, the error occurred, the interface descriptor memory need to be free. Reviewed-by: Peter Chen <peter.chen@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Zqiang <qiang.zhang@windriver.com> Link: https://lore.kernel.org/r/20201210020148.6691-1-qiang.zhang@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12usb: gadget: f_uac2: reset wMaxPacketSizeJerome Brunet1-14/+55
commit 9389044f27081d6ec77730c36d5bf9a1288bcda2 upstream. With commit 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth") wMaxPacketSize is computed dynamically but the value is never reset. Because of this, the actual maximum packet size can only decrease each time the audio gadget is instantiated. Reset the endpoint maximum packet size and mark wMaxPacketSize as dynamic to solve the problem. Fixes: 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201221173531.215169-2-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12usb: gadget: select CONFIG_CRC32Arnd Bergmann1-0/+2
commit d7889c2020e08caab0d7e36e947f642d91015bd0 upstream. Without crc32 support, this driver fails to link: arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_eem.o: in function `eem_unwrap': f_eem.c:(.text+0x11cc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_ncm.o:f_ncm.c:(.text+0x1e40): more undefined references to `crc32_le' follow Fixes: 6d3865f9d41f ("usb: gadget: NCM: Add transmit multi-frame.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210103214224.1996535-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-16 12:49:53 +0300