summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-01-02n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)Linus Torvalds1-2/+2
commit 966031f340185eddd05affcf72b740549f056348 upstream. We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") and the intent was to allow it to override some (all?) ICANON behavior. Quoting from that original commit message: There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. but the problem turns out that "several aspects of the terminal driver are disabled" is a bit ambiguous, and you can really confuse the n_tty layer by setting EXTPROC and then causing some of the ICANON invariants to no longer be maintained. This fixes at least one such case (TIOCINQ) becoming unhappy because of the confusion over whether ICANON really means ICANON when EXTPROC is set. This basically makes TIOCINQ match the case of read: if EXTPROC is set, we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC changes, not just if ICANON changes. Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzkaller <syzkaller@googlegroups.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201Daniel Thompson1-0/+3
commit da99706689481717998d1d48edd389f339eea979 upstream. When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: Fix off by one in type-specific length check of BOS SSP capabilityMathias Nyman1-1/+1
commit 07b9f12864d16c3a861aef4817eb1efccbc5d0e6 upstream. USB 3.1 devices are not detected as 3.1 capable since 4.15-rc3 due to a off by one in commit 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") It uses USB_DT_USB_SSP_CAP_SIZE() to get SSP capability size which takes the zero based SSAC as argument, not the actual count of sublink speed attributes. USB3 spec 9.6.2.5 says "The number of Sublink Speed Attributes = SSAC + 1." The type-specific length check patch was added to stable and needs to be fixed there as well Fixes: 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") CC: Masakazu Mokuno <masakazu.mokuno@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usb: add RESET_RESUME for ELSA MicroLink 56KOliver Neukum1-0/+3
commit b9096d9f15c142574ebebe8fbb137012bb9d99c2 upstream. This modem needs this quirk to operate. It produces timeouts when resumed without reset. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usb: Add device quirk for Logitech HD Pro Webcam C925eDmitry Fleytman Dmitry Fleytman1-1/+2
commit 7f038d256c723dd390d2fca942919573995f4cfd upstream. Commit e0429362ab15 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. There is one more model that has the same issue - C925e, so applying the same quirk as well. See aforementioned commit message for detailed explanation of the problem. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: serial: option: adding support for YUGA CLM920-NC5SZ Lin (林上智)1-0/+9
commit 3920bb713038810f25770e7545b79f204685c8f2 upstream. This patch adds support for YUGA CLM920-NC5 PID 0x9625 USB modem to option driver. Interface layout: 0: QCDM/DIAG 1: ADB 2: MODEM 3: AT 4: RMNET Signed-off-by: Taiyi Wu <taiyity.wu@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: serial: option: add support for Telit ME910 PID 0x1101Daniele Palmas1-0/+8
commit 08933099e6404f588f81c2050bfec7313e06eeaf upstream. This patch adds support for PID 0x1101 of Telit ME910. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: serial: qcserial: add Sierra Wireless EM7565Reinhard Speyerer1-0/+3
commit 92a18a657fb2e2ffbfa0659af32cc18fd2346516 upstream. Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their serial ports T: Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=9091 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms but need sendsetup = true for the NMEA port to make it work properly. Simplify the patch compared to v1 as suggested by Bjørn Mork by taking advantage of the fact that existing devices work with sendsetup = true too. Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID 0x9090. Tests with several MC73xx/MC74xx/MC77xx devices have been performed in order to verify backward compatibility. Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: serial: ftdi_sio: add id for Airbus DS P8GRMax Schulze2-0/+7
commit c6a36ad383559a60a249aa6016cebf3cb8b6c485 upstream. Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver. Signed-off-by: Max Schulze <max.schulze@posteo.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usbip: vhci: stop printing kernel pointer addresses in messagesShuah Khan3-23/+13
commit 8272d099d05f7ab2776cf56a2ab9f9443be18907 upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usbip: stub: stop printing kernel pointer addresses in messagesShuah Khan3-9/+7
commit 248a22044366f588d46754c54dfe29ffe4f8b4df upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaroundGrygorii Strashko1-0/+1
[ Upstream commit c1a8d0a3accf64a014d605e6806ce05d1c17adf1 ] Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: mvmdio: disable/unprepare clocks in EPROBE_DEFER caseTobias Jordan1-1/+2
[ Upstream commit 589bf32f09852041fbd3b7ce1a9e703f95c230ba ] add appropriate calls to clk_disable_unprepare() by jumping to out_mdio in case orion_mdio_probe() returns -EPROBE_DEFER. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3d604da1e954 ("net: mvmdio: get and enable optional clock") Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02tg3: Fix rx hang on MTU change with 5717/5719Brian King1-1/+3
[ Upstream commit 748a240c589824e9121befb1cba5341c319885bc ] This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: qmi_wwan: add Sierra EM7565 1199:9091Sebastian Sjoholm1-0/+1
[ Upstream commit aceef61ee56898cfa7b6960fb60b9326c3860441 ] Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem. The USB id is added to qmi_wwan.c to allow QMI communication with the EM7565. Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02iw_cxgb4: Only validate the MSN for successful completionsSteve Wise1-3/+3
commit f55688c45442bc863f40ad678c638785b26cdce6 upstream. If the RECV CQE is in error, ignore the MSN check. This was causing recvs that were flushed into the sw cq to be completed with the wrong status (BAD_MSN instead of FLUSHED). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: mvneta: clear interface link status on port disableYelena Krivosheev1-0/+4
commit 4423c18e466afdfb02a36ee8b9f901d144b3c607 upstream. When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02spi: xilinx: Detect stall with Unknown commandsRicardo Ribalda Delgado1-0/+11
commit 5a1314fa697fc65cefaba64cd4699bfc3e6882a6 upstream. When the core is configured in C_SPI_MODE > 0, it integrates a lookup table that automatically configures the core in dual or quad mode based on the command (first byte on the tx fifo). Unfortunately, that list mode_?_memoy_*.mif does not contain all the supported commands by the flash. Since 4.14 spi-nor automatically tries to probe the flash using SFDP (command 0x5a), and that command is not part of the list_mode table. Whit the right combination of C_SPI_MODE and C_SPI_MEMORY this leads into a stall that can only be recovered with a soft rest. This patch detects this kind of stall and returns -EIO to the caller on those commands. spi-nor can handle this error properly: m25p80 spi0.0: Detected stall. Check C_SPI_MODE and C_SPI_MEMORY. 0x21 0x2404 m25p80 spi0.0: SPI transfer failed: -5 spi_master spi0: failed to transfer one message from queue m25p80 spi0.0: s25sl064p (8192 Kbytes) Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02parisc: Hide Diva-built-in serial aux and graphics cardHelge Deller1-0/+33
commit bcf3f1752a622f1372d3252d0fea8855d89812e7 upstream. Diva GSP card has built-in serial AUX port and ATI graphic card which simply don't work and which both don't have external connectors. User Guides even mention that those devices shouldn't be used. So, prevent that Linux drivers try to enable those devices. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02PCI / PM: Force devices to D0 in pci_pm_thaw_noirq()Rafael J. Wysocki1-1/+6
commit 5839ee7389e893a31e4e3c9cf17b50d14103c902 upstream. It is incorrect to call pci_restore_state() for devices in low-power states (D1-D3), as that involves the restoration of MSI setup which requires MMIO to be operational and that is only the case in D0. However, pci_pm_thaw_noirq() may do that if the driver's "freeze" callbacks put the device into a low-power state, so fix it by making it force devices into D0 via pci_set_power_state() instead of trying to "update" their power state which is pointless. Fixes: e60514bd4485 (PCI/PM: Restore the status of PCI devices across hibernation) Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Maarten Lankhorst <dev@mblankhorst.nl> Tested-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Maarten Lankhorst <dev@mblankhorst.nl> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02mfd: twl6040: Fix child-node lookupJohan Hovold1-4/+8
commit 85e9b13cbb130a3209f21bd7933933399c389ffe upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Note that the CONFIG_OF compile guard can be removed as of_get_child_by_name() provides a !CONFIG_OF implementation which always fails. Fixes: 37e13cecaa14 ("mfd: Add support for Device Tree to twl6040") Fixes: ca2cad6ae38e ("mfd: Fix twl6040 build failure") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02mfd: twl4030-audio: Fix sibling-node lookupJohan Hovold1-2/+7
commit 0a423772de2f3d7b00899987884f62f63ae00dcb upstream. A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while leaking any matching node. To make things worse, any matching node would not even necessarily be a child node as the whole device tree was searched depth-first starting at the parent. Fixes: 019a7e6b7b31 ("mfd: twl4030-audio: Add DT support") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02mfd: cros ec: spi: Don't send first message too soonJon Hunter1-0/+1
commit 15d8374874ded0bec37ef27f8301a6d54032c0e5 upstream. On the Tegra124 Nyan-Big chromebook the very first SPI message sent to the EC is failing. The Tegra SPI driver configures the SPI chip-selects to be active-high by default (and always has for many years). The EC SPI requires an active-low chip-select and so the Tegra chip-select is reconfigured to be active-low when the EC SPI driver calls spi_setup(). The problem is that if the first SPI message to the EC is sent too soon after reconfiguring the SPI chip-select, it fails. The EC SPI driver prevents back-to-back SPI messages being sent too soon by keeping track of the time the last transfer was sent via the variable 'last_transfer_ns'. To prevent the very first transfer being sent too soon, initialise the 'last_transfer_ns' variable after calling spi_setup() and before sending the first SPI message. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Benson Leung <bleung@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ACPI: APEI / ERST: Fix missing error handling in erst_reader()Takashi Iwai1-1/+1
commit bb82e0b4a7e96494f0c1004ce50cec3d7b5fb3d1 upstream. The commit f6f828513290 ("pstore: pass allocated memory region back to caller") changed the check of the return value from erst_read() in erst_reader() in the following way: if (len == -ENOENT) goto skip; - else if (len < 0) { - rc = -1; + else if (len < sizeof(*rcd)) { + rc = -EIO; goto out; This introduced another bug: since the comparison with sizeof() is cast to unsigned, a negative len value doesn't hit any longer. As a result, when an error is returned from erst_read(), the code falls through, and it may eventually lead to some weird thing like memory corruption. This patch adds the negative error value check more explicitly for addressing the issue. Fixes: f6f828513290 (pstore: pass allocated memory region back to caller) Tested-by: Jerry Tang <jtang@suse.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"Greg Kroah-Hartman1-5/+0
This reverts commit ffc7565746bb2fc063fc0f484c55ef6d8951a6ee which is commit a0085f2510e8976614ad8f766b209448b385492f upstream. It causes problems with working systems, as noted by a number of the ChromeOS developers. Cc: Sukumar Ghorai <sukumar.ghorai@intel.com> Cc: Amit K Bag <amit.k.bag@intel.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Matthias Kaehlcke <mka@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Brian Norris <briannorris@chromium.org> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25thermal: hisilicon: Handle return value of clk_prepare_enableArvind Yadav1-1/+4
commit 919054fdfc8adf58c5512fe9872eb53ea0f5525d upstream. clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25cpuidle: fix broadcast control when broadcast can not be enteredNicholas Piggin1-0/+1
[ Upstream commit f187851b9b4a76952b1158b86434563dd2031103 ] When failing to enter broadcast timer mode for an idle state that requires it, a new state is selected that does not require broadcast, but the broadcast variable remains set. This causes tick_broadcast_exit to be called despite not having entered broadcast mode. This causes the WARN_ON_ONCE(!irqs_disabled()) to trigger in some cases. It does not appear to cause problems for code today, but seems to violate the interface so should be fixed. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25rtc: set the alarm to the next expiring timerAlexandre Belloni1-1/+1
[ Upstream commit 74717b28cb32e1ad3c1042cafd76b264c8c0f68d ] If there is any non expired timer in the queue, the RTC alarm is never set. This is an issue when adding a timer that expires before the next non expired timer. Ensure the RTC alarm is set in that case. Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25fm10k: ensure we process SM mbx when processing VF mbxJacob Keller1-0/+3
[ Upstream commit 17a91809942ca32c70026d2d5ba3348a2c4fdf8f ] When we process VF mailboxes, the driver is likely going to also queue up messages to the switch manager. This process merely queues up the FIFO, but doesn't actually begin the transmission process. Because we hold the mailbox lock during this VF processing, the PF<->SM mailbox is not getting processed at this time. Ensure that we actually process the PF<->SM mailbox in between each PF<->VF mailbox. This should ensure prompt transmission of the messages queued up after each VF message is received and handled. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25scsi: lpfc: PLOGI failures during NPIV testingDick Kennedy1-1/+2
[ Upstream commit e8bcf0ae4c0346fdc78ebefe0eefcaa6a6622d38 ] Local Reject/Invalid RPI errors seen during discovery. Temporary RPI cleanup was occurring regardless of SLI rev. It's only necessary on SLI-4. Adjust the test for whether cleanup is necessary. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25scsi: lpfc: Fix secure firmware updatesDick Kennedy1-1/+1
[ Upstream commit 184fc2b9a8bcbda9c14d0a1e7fbecfc028c7702e ] Firmware update fails with: status x17 add_status x56 on the final write If multiple DMA buffers are used for the download, some firmware revs have difficulty with signatures and crcs split across the dma buffer boundaries. Resolve by making all writes be a single 4k page in length. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25PCI/AER: Report non-fatal errors only to the affected endpointGabriele Paoloni1-1/+8
[ Upstream commit 86acc790717fb60fb51ea3095084e331d8711c74 ] Previously, if an non-fatal error was reported by an endpoint, we called report_error_detected() for the endpoint, every sibling on the bus, and their descendents. If any of them did not implement the .error_detected() method, do_recovery() failed, leaving all these devices unrecovered. For example, the system described in the bugzilla below has two devices: 0000:74:02.0 [19e5:a230] SAS controller, driver has .error_detected() 0000:74:03.0 [19e5:a235] SATA controller, driver lacks .error_detected() When a device such as 74:02.0 reported a non-fatal error, do_recovery() failed because 74:03.0 lacked an .error_detected() method. But per PCIe r3.1, sec 6.2.2.2.2, such an error does not compromise the Link and does not affect 74:03.0: Non-fatal errors are uncorrectable errors which cause a particular transaction to be unreliable but the Link is otherwise fully functional. Isolating Non-fatal from Fatal errors provides Requester/Receiver logic in a device or system management software the opportunity to recover from the error without resetting the components on the Link and disturbing other transactions in progress. Devices not associated with the transaction in error are not impacted by the error. Report non-fatal errors only to the endpoint that reported them. We really want to check for AER_NONFATAL here, but the current code structure doesn't allow that. Looking for pci_channel_io_normal is the best we can do now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197055 Fixes: 6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver") Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25ixgbe: fix use of uninitialized paddingEmil Tantilov2-2/+4
[ Upstream commit dcfd6b839c998bc9838e2a47f44f37afbdf3099c ] This patch is resolving Coverity hits where padding in a structure could be used uninitialized. - Initialize fwd_cmd.pad/2 before ixgbe_calculate_checksum() - Initialize buffer.pad2/3 before ixgbe_hic_unlocked() Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25igb: check memory allocation failureChristophe JAILLET1-0/+2
[ Upstream commit 18eb86362a52f0af933cc0fd5e37027317eb2d1c ] Check memory allocation failures and return -ENOMEM in such cases, as already done for other memory allocations in this function. This avoids NULL pointers dereference. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com Acked-by: PJ Waskiewicz <peter.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25PCI: Create SR-IOV virtfn/physfn links before attaching driverStuart Hayes1-1/+2
[ Upstream commit 27d6162944b9b34c32cd5841acd21786637ee743 ] When creating virtual functions, create the "virtfn%u" and "physfn" links in sysfs *before* attaching the driver instead of after. When we attach the driver to the new virtual network interface first, there is a race when the driver attaches to the new sends out an "add" udev event, and the network interface naming software (biosdevname or systemd, for example) tries to look at these links. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume ↵Sreekanth Reddy1-0/+5
created on two SATA drive [ Upstream commit 2ce9a3645299ba1752873d333d73f67620f4550b ] Whenever an I/O for a RAID volume fails with IOCStatus MPI2_IOCSTATUS_SCSI_IOC_TERMINATED and SCSIStatus equal to (MPI2_SCSI_STATE_TERMINATED | MPI2_SCSI_STATE_NO_SCSI_STATUS) then return the I/O to SCSI midlayer with "DID_RESET" (i.e. retry the IO infinite times) set in the host byte. Previously, the driver was completing the I/O with "DID_SOFT_ERROR" which causes the I/O to be quickly retried. However, firmware needed more time and hence I/Os were failing. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25scsi: cxgb4i: fix Tx skb leakVarun Prakash1-0/+1
[ Upstream commit 9b3a081fb62158b50bcc90522ca2423017544367 ] In case of connection reset Tx skb queue can have some skbs which are not transmitted so purge Tx skb queue in release_offload_resources() to avoid skb leak. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25PCI: Avoid bus reset if bridge itself is brokenDavid Daney1-0/+4
[ Upstream commit 357027786f3523d26f42391aa4c075b8495e5d28 ] When checking to see if a PCI bus can safely be reset, we previously checked to see if any of the children had their PCI_DEV_FLAGS_NO_BUS_RESET flag set. Children marked with that flag are known not to behave well after a bus reset. Some PCIe root port bridges also do not behave well after a bus reset, sometimes causing the devices behind the bridge to become unusable. Add a check for PCI_DEV_FLAGS_NO_BUS_RESET being set in the bridge device to allow these bridges to be flagged, and prevent their secondary buses from being reset. Signed-off-by: David Daney <david.daney@cavium.com> [jglauber@cavium.com: fixed typo] Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25net: phy: at803x: Change error to EINVAL for invalid MACDan Murphy1-1/+1
[ Upstream commit fc7556877d1748ac00958822a0a3bba1d4bd9e0d ] Change the return error code to EINVAL if the MAC address is not valid in the set_wol function. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25rtc: pl031: make interrupt optionalRussell King1-6/+8
[ Upstream commit 5b64a2965dfdfca8039e93303c64e2b15c19ff0c ] On some platforms, the interrupt for the PL031 is optional. Avoid trying to claim the interrupt if it's not specified. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25crypto: crypto4xx - increase context and scatter ring buffer elementsChristian Lamparter1-5/+5
[ Upstream commit 778f81d6cdb7d25360f082ac0384d5103f04eca5 ] If crypto4xx is used in conjunction with dm-crypt, the available ring buffer elements are not enough to handle the load properly. On an aes-cbc-essiv:sha256 encrypted swap partition the read performance is abyssal: (tested with hdparm -t) /dev/mapper/swap_crypt: Timing buffered disk reads: 14 MB in 3.68 seconds = 3.81 MB/sec The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256. This improves the performance considerably: /dev/mapper/swap_crypt: Timing buffered disk reads: 104 MB in 3.03 seconds = 34.31 MB/sec Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD can be easily calculated from their respective PPC4XX_NUM_* constant. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25backlight: pwm_bl: Fix overflow conditionDerek Basehore1-2/+5
[ Upstream commit 5d0c49acebc9488e37db95f1d4a55644e545ffe7 ] This fixes an overflow condition that can happen with high max brightness and period values in compute_duty_cycle. This fixes it by using a 64 bit variable for computing the duty cycle. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25bnxt_en: Fix NULL pointer dereference in reopen failure pathSankar Patchineelam1-0/+13
[ Upstream commit 2247925f0942dc4e7c09b1cde45ca18461d94c5f ] Net device reset can fail when the h/w or f/w is in a bad state. Subsequent netdevice open fails in bnxt_hwrm_stat_ctx_alloc(). The cleanup invokes bnxt_hwrm_resource_free() which inturn calls bnxt_disable_int(). In this routine, the code segment if (ring->fw_ring_id != INVALID_HW_RING_ID) BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons); results in NULL pointer dereference as cpr->cp_doorbell is not yet initialized, and fw_ring_id is zero. The fix is to initialize cpr fw_ring_id to INVALID_HW_RING_ID before bnxt_init_chip() is invoked. Signed-off-by: Sankar Patchineelam <sankar.patchineelam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25cpuidle: powernv: Pass correct drv->cpumask for registrationVaidyanathan Srinivasan1-0/+18
[ Upstream commit 293d264f13cbde328d5477f49e3103edbc1dc191 ] drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init(). On PowerNV platform cpu_present could be less than cpu_possible in cases where firmware detects the cpu, but it is not available to the OS. When CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence we skip creating cpu_device. This breaks cpuidle on powernv where register_cpu() is not called for cpus in cpu_possible_mask that cannot be hot-added at runtime. Trying cpuidle_register_device() on cpu without cpu_device will cause crash like this: cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490] pc: c00000000022c8bc: string+0x34/0x60 lr: c00000000022ed78: vsnprintf+0x284/0x42c sp: c000000ff1503710 msr: 9000000000009033 dar: 6000000060000000 current = 0xc000000ff1480000 paca = 0xc00000000fe82d00 softe: 0 irq_happened: 0x01 pid = 1, comm = swapper/8 Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4 (Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017 enter ? for help [link register ] c00000000022ed78 vsnprintf+0x284/0x42c [c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable) [c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44 [c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc [c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74 [c000000ff15038c0] c000000000619694 printk+0x38/0x4c [c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60 [c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4 [c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78 [c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0 [c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c [c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc [c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0 [c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c [c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c [c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c [c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78 This patch fixes the bug by passing correct cpumask from powernv-cpuidle driver. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [ rjw: Comment massage ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25xhci: plat: Register shutdown for xhci_platAdam Wallis1-0/+1
[ Upstream commit b07c12517f2aed0add8ce18146bb426b14099392 ] Shutdown should be called for xhci_plat devices especially for situations where kexec might be used by stopping DMA transactions. Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25isdn: kcapi: avoid uninitialized dataArnd Bergmann1-0/+1
[ Upstream commit af109a2cf6a9a6271fa420ae2d64d72d86c92b7d ] gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized value ending up in the cardnr parameter: drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer': drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized] cparams.cardnr = cdef.cardnr; This has been broken since before the start of the git history, so either the value is not used for anything important, or the ioctl command doesn't get called in practice. Setting the cardnr to zero avoids the warning and makes sure we have consistent behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25irda: vlsi_ir: fix check for DMA mapping errorsAlexey Khoroshilov1-4/+4
[ Upstream commit 6ac3b77a6ffff7513ff86b684aa256ea01c0e5b5 ] vlsi_alloc_ring() checks for DMA mapping errors by comparing returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25RDMA/iser: Fix possible mr leak on device removal eventSagi Grimberg2-3/+7
[ Upstream commit ea174c9573b0e0c8bc1a7a90fe9360ccb7aa9cbb ] When the rdma device is removed, we must cleanup all the rdma resources within the DEVICE_REMOVAL event handler to let the device teardown gracefully. When this happens with live I/O, some memory regions are occupied. Thus, track them too and dereg all the mr's. We are safe with mr access by iscsi_iser_cleanup_task. Reported-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25i40e: Do not enable NAPI on q_vectors that have no ringsAlexander Duyck1-4/+12
[ Upstream commit 13a8cd191a2b470cfd435b3b57dbd21aa65ff78c ] When testing the epoll w/ busy poll code I found that I could get into a state where the i40e driver had q_vectors w/ active NAPI that had no rings. This was resulting in a divide by zero error. To correct it I am updating the driver code so that we only support NAPI on q_vectors that have 1 or more rings allocated to them. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25bna: avoid writing uninitialized data into hw registersArnd Bergmann1-3/+7
[ Upstream commit a5af83925363eb85d467933e3d6ec5a87001eb7c ] The latest gcc-7 snapshot warns about bfa_ioc_send_enable/bfa_ioc_send_disable writing undefined values into the hardware registers: drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function 'bfa_iocpf_sm_disabling_entry': arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+4)' is used uninitialized in this function [-Werror=uninitialized] arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+8)' is used uninitialized in this function [-Werror=uninitialized] The two functions look like they should do the same thing, but only one of them initializes the time stamp and clscode field. The fact that we only get a warning for one of the two functions seems to be arbitrary, based on the inlining decisions in the compiler. To address this, I'm making both functions do the same thing: - set the clscode from the ioc structure in both - set the time stamp from ktime_get_real_seconds (which also avoids the signed-integer overflow in 2038 and extends the well-defined behavior until 2106). - zero-fill the reserved field Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 17:13:26 +0300