summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-01-06Merge branch 'fbdev/udlfb'Paul Mundt9-365/+64
2011-01-06video: udlfb: Kill off special printk wrappers, use pr_fmt().Paul Mundt1-37/+39
This kills off all of the dl_xxx() printk wrappers and simply stubs in a pr_fmt() definition to accomplish the same thing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: udlfb: Kill off some magic constants for EDID sizing.Paul Mundt1-8/+7
The edid length is fixed, so use the standard definition consistently. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: udlfb: deifdefify (yes, that's a word).Paul Mundt1-39/+2
udlfb selects all of the options it presently ifdef conditionalizes, so none of the statements have any effect outside of aggravating eye strain. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06fbdev: modedb: Add a new mode for 864x480 TAAL panels.Mayuresh Janorkar1-0/+4
This adds a new entry to the modedb for 864x480 TAAL panels, the default configuration for many OMAP boards. This enables omapfb to make use of the standard mode parsing. Signed-off-by: Mayuresh Janorkar <mayur@ti.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06drivers/video/i810/i810-i2c.c: fix i2c bus handlingStefani Seibold1-4/+8
These patch fix a longstanding bug in the i810 frame buffer driver. The handling of the i2c bus is wrong: A 1 bit should not written to the i2c, these will be done by switch the i2c to input. Driving an 1 bit active is against the i2c spec. An active driven of a 1 bit will result in very strange error, depending which side is the more powerful one. In my case it depends on the temperature of the Display-Controller-EEprom: With an cold eprom a got the correct EDID datas, with a warm one some of the 1 bits was 0 :-( The same bug is also in the intelfb driver in the file drivers/video/intelfb/intelfb_i2c.c. The functions intelfb_gpio_setscl() and intelfb_gpio_setsda() do drive the 1 bit active to the i2c bus. But since i have no card which is used by the intelfb driver i cannot fix it. Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: Fix the HGA framebuffer driverBrent Cook2-25/+11
Resurrected some old hardware and fixed up the hgafb driver to work again. Only tested with fbcon, since most fbdev-based software appears to only support 12bpp and up. It does not appear that this driver has worked for at least the entire 2.6.x series, perhaps since 2002. Hercules graphics hardware uses packed pixels horizontally, but rows are not linear. In other words, the pixels are not packed vertically. This means that custom imageblit, fillrect and copyarea need to be written specific to the hardware. * Removed the experimental acceleration option, since it is required for the hardware to work. * Fixed imageblit to work with fb_image's wider than 8 pixels. * Updated configuration text (HGA hardware is from 1984) Signed-off-by: Brent Cook <busterb@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06drivers/video/carminefb.c: improve error handlingJulia Lawall1-4/+2
This code had an error handling goto to the wrong place, a misplaced release_mem_region, and a duplicated release_mem_region. The semantic match that finds the double release_mem_region is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression e1,e2,e3; position p1,p2,p3; @@ release_mem_region@p1(e1, e2)@p3; ... when != request_mem_region(e1,e2,e3) release_mem_region(e1, e2)@p2; @@ expression e <= r.e1,e3; expression r.e1,e2; position r.p1,r.p2,r.p3,p!=r.p1; @@ *release_mem_region(e1, e2)@p3; ... when != e = e3 *release_mem_region@p(e1, e2)@p2;// </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: imxfb: Fix the maximum value for yresFabio Estevam1-6/+3
MX27 and MX25 have 10 bits in the YMAX field of LCDC Size Register. Fix the maximum value for yres. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06fbdev: sh_mobile_lcdcfb: Enable 32 bpp and 24 bpp supportMagnus Damm1-11/+63
This patch extends the LCDC driver with 24 bpp and 32 bpp support. These modes have been kept disabled earlier due to dependencies between the potential two LCDC channels that are exported as two separate framebuffer devices. The dependency boils down to a byte swap register that is shared between multiple channels. With this patch applied all single channel LCDC hardware can chose freely from 16, 24 and 32 bpp. Dual channel LCDC must stick to the same setup for both channels. Without this patch only 16 bpp is fully supported. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-05Merge branch 'common/fbdev-mipi' of ↵Paul Mundt1-8/+28
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
2011-01-05fbdev: sh_mipi_dsi: use platform provided register layout and valuesGuennadi Liakhovetski1-5/+11
Different sh-mobile SoCs have variations in their MIPI DSI register layouts, besides, different LCD panels require different configuration parameters. This patch switches the driver to use platform-provided MIPI DSI parameters. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-05fbdev: sh-mobile: implement MIPI DSI runtime PM supportGuennadi Liakhovetski1-3/+17
On SH-Mobile platforms using runtime PM with the MIPI DSI driver switches the DSI Tx link clock on PM events. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: eliminate compiler warningsAaro Koskinen2-3/+3
Convert some bit masks to 8-bit values to avoid the following compiler warnings: drivers/video/sis/sis_main.c:3858: warning: large integer implicitly truncated to unsigned type drivers/video/sis/init301.c:5855: warning: large integer implicitly truncated to unsigned type drivers/video/sis/init301.c:5869: warning: large integer implicitly truncated to unsigned type Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: delete unused register I/O macrosAaro Koskinen1-53/+1
Delete unused register I/O macros. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace setSISIDXREG with SiS_SetRegANDORAaro Koskinen1-47/+47
Replace setSISIDXREG() with SiS_SetRegANDOR(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace andSISIDXREG with SiS_SetRegANDAaro Koskinen1-33/+33
Replace andSISIDXREG() with SiS_SetRegAND(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace orSISIDXREG with SiS_SetRegORAaro Koskinen1-36/+36
Replace orSISIDXREG() with SiS_SetRegOR(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace outSISIDXREG with SiS_SetRegAaro Koskinen1-315/+315
Replace outSISIDXREG() with SiS_SetReg(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace inSISIDXREG with SiS_GetRegAaro Koskinen1-128/+128
Replace inSISIDXREG() with SiS_GetReg(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace outSISREG with SiS_SetRegByteAaro Koskinen1-10/+10
Replace outSISREG() with SiS_SetRegByte(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace inSISREG with SiS_GetRegByteAaro Koskinen1-9/+9
Replace inSISREG() with SiS_GetRegByte(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: change register I/O functions to use fixed size typesAaro Koskinen2-32/+32
Use fixed-sized types (u8, u16, u32) instead of plain C types. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: remove duplicate function declarationsAaro Koskinen3-25/+14
Remove duplicate register I/O function declarations by moving them into a common header file. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: delete HAVE_CONFIG_H checksAaro Koskinen2-8/+0
Delete unneeded HAVE_CONFIG_H checks. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: eliminate unused variable compiler warningAaro Koskinen1-14/+16
Eliminate the following compiler warning on non-x86 platforms by limiting the variable scope: drivers/video/sis/sis_main.c:4108: warning: unused variable 'temp' Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22Merge branch 'master' of ↵Paul Mundt503-5309/+9379
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-12-21Merge branch 'tty-linus' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: n_gsm: gsm_data_alloc buffer allocation could fail and it is not being checked n_gsm: Fix message length handling when building header
2010-12-21Merge branch 'usb-linus' of ↵Linus Torvalds7-22/+50
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: Revert "USB: gadget: Allow function access to device ID data during bind()" USB: misc: uss720.c: add another vendor/product ID USB: usb-storage: unusual_devs entry for the Samsung YP-CP3 USB: gadget: Remove suspended sysfs file before freeing cdev USB: core: Add input prompt and help text for USB_OTG config USB: ftdi_sio: Add D.O.Tec PID xhci: Fix issue with port array setup and buggy hosts.
2010-12-21Fix build error in drivers/block/cciss.cLinus Torvalds1-1/+1
.. caused by a missing semi-colon, introduced in commit 0fc13c8995cd ("cciss: fix cciss_revalidate panic"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Thiago Farina <tfransosi@gmail.com> Cc: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-20Merge branch 'v4l_for_linus' of ↵Linus Torvalds6-363/+204
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] gspca - sonixj: Better handling of the bridge registers 0x01 and 0x17 [media] gspca - sonixj: Add the bit definitions of the bridge reg 0x01 and 0x17 [media] gspca - sonixj: Set the flag for some devices [media] gspca - sonixj: Add a flag in the driver_info table [media] gspca - sonixj: Fix a bad probe exchange [media] gspca - sonixj: Move bridge init to sd start [media] bttv: remove unneeded locking comments [media] bttv: fix mutex use before init (BZ#24602) [media] Don't export format_by_forcc on two different drivers
2010-12-20Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: clocksource: sh_cmt: Remove nested spinlock fix
2010-12-20Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: OMAP: OMAPFB: disable old omapfb for OMAP4 builds OMAP: DSS: VRAM: Align start & size of vram to 2M
2010-12-20Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds7-21/+24
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: fix cciss_revalidate panic block: max hardware sectors limit wrapper block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead blk-throttle: Correct the placement of smp_rmb() blk-throttle: Trim/adjust slice_end once a bio has been dispatched block: check for proper length of iov entries earlier in blk_rq_map_user_iov() drbd: fix for spin_lock_irqsave in endio callback drbd: don't recvmsg with zero length
2010-12-20fbdev: Modify vsync timing calculation in wm8505fbAlexey Charkov1-1/+1
This removes the '+1' in vsync timing calculation for wm8505fb to directly use values provided from the board setup code. Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-20fbdev: Minor cleanup in WM8505-related codeAlexey Charkov2-9/+3
This replaces the last remaining driver name reference with the macro for uniformity in wm8505fb. In addition, the error return path in wmt_ge_rops.c is made more uniform by getting rid of goto's in remaining places. Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-20s1d13xxxfb: drop unused codeAndres Salomon1-50/+0
Silence warnings such as - drivers/video/s1d13xxxfb.c:421: warning: ‘bltbit_wait_bitset’ defined but not used Just drop the unused code. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-20s3c-fb: add support for runtime pmJingoo Han1-4/+107
This patch adds support for runtime pm using the functions. - pm_runtime_get_sync() - pm_runtime_put_sync() pm_runtime_get_sync() and pm_runtime_put_sync() are called when open or release function of framebufer driver is called to inform the system if hardware is idle or not. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-19Merge branches 'x86-fixes-for-linus' and 'perf-fixes-for-linus' of ↵Linus Torvalds2-0/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32: Make sure we can map all of lowmem if we need to x86, vt-d: Handle previous faults after enabling fault handling x86: Enable the intr-remap fault handling after local APIC setup x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic mode x86, vt-d: Quirk for masking vtd spec errors to platform error handling logic x86, xsave: Use alloc_bootmem_align() instead of alloc_bootmem() bootmem: Add alloc_bootmem_align() x86, gcc-4.6: Use gcc -m options when building vdso x86: HPET: Chose a paranoid safe value for the ETIME check x86: io_apic: Avoid unused variable warning when CONFIG_GENERIC_PENDING_IRQ=n * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix off by one in perf_swevent_init() perf: Fix duplicate events with multiple-pmu vs software events ftrace: Have recordmcount honor endianness in fn_ELF_R_INFO scripts/tags.sh: Add magic for trace-events tracing: Fix panic when lseek() called on "trace" opened for writing
2010-12-18Merge branch 'for-linus' of ↵Linus Torvalds2-76/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86: avoid high BIOS area when allocating address space x86: avoid E820 regions when allocating address space x86: avoid low BIOS area when allocating address space resources: add arch hook for preventing allocation in reserved areas Revert "resources: support allocating space within a region from the top down" Revert "PCI: allocate bus resources from the top down" Revert "x86/PCI: allocate space from the end of a region, not the beginning" Revert "x86: allocate space within a region top-down" Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode" PCI: Update MCP55 quirk to not affect non HyperTransport variants
2010-12-17[media] gspca - sonixj: Better handling of the bridge registers 0x01 and 0x17Jean-Francois Moine1-163/+100
The initial values of the registers 0x01 and 0x17 are taken from the sensor table at capture start and updated according to the flag PDN_INV. Their values are updated at each step of the capture initialization and memorized for reuse in capture stop. This patch also fixed automatically some bad hardcoded values of these registers. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17[media] gspca - sonixj: Add the bit definitions of the bridge reg 0x01 and 0x17Jean-Francois Moine1-0/+13
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17[media] gspca - sonixj: Set the flag for some devicesJean-Francois Moine1-2/+5
The flag PDN_INV indicates that the sensor pin S_PWR_DN has not the same value as other webcams with the same sensor. For now, only two webcams have been so detected: the Microsoft's VX1000 and VX3000. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17[media] gspca - sonixj: Add a flag in the driver_info tableJean-Francois Moine1-2/+8
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17[media] gspca - sonixj: Fix a bad probe exchangeJean-Francois Moine1-2/+2
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17[media] gspca - sonixj: Move bridge init to sd startJean-Francois Moine1-136/+129
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17[media] bttv: remove unneeded locking commentsBrandon Philips1-20/+0
After Mauro's "bttv: Fix locking issues due to BKL removal code" there are a number of comments that are no longer needed about lock ordering. Remove them. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17[media] bttv: fix mutex use before init (BZ#24602)Mauro Carvalho Chehab1-94/+3
Fix a regression where bttv driver causes oopses when loading, since it were using some non-initialized mutexes. While it would be possible to fix the issue, there are some other lock troubles, like to the presence of lock code at free_btres_lock(). It is possible to fix, but the better is to just use the core-assisted locking schema. This way, V4L2 core will serialize access to all ioctl's/open/close/mmap/read/poll operations, avoiding to have two processes accessing the hardware at the same time. Also, as there's just one lock, instead of 3, there's no risk of dead locks. The net result is a cleaner code, with just one lock. Reported-by: Dan Carpenter <error27@gmail.com> Reported-by: Brandon Philips<brandon@ifup.org> Reported-by: Chris Clayton <chris2553@googlemail.com> Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-17Revert "PCI: allocate bus resources from the top down"Bjorn Helgaas1-48/+5
This reverts commit b126b4703afa4010b161784a43650337676dd03b. We're going back to the old behavior of allocating from bus resources in _CRS order. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"Bjorn Helgaas1-49/+21
This reverts commit 82e3e767c21fef2b1b38868e20eb4e470a1e38e3. We're going back to considering bus resources in the order we found them (in _CRS order, when we're using _CRS), so we don't need to define any ordering. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-17 02:01:18 +0300