summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-08-11Merge branch 'for-upstream' of ↵David S. Miller5-3/+661
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-08-10 Here's one more (most likely last) bluetooth-next pull request for the 4.19 kernel. - Added support for MediaTek serial Bluetooth devices - Initial skeleton for controller-side address resolution support - Fix BT_HCIUART_RTL related Kconfig dependencies - A few other minor fixes/cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10cxgb4: add support to display DCB infoGanesh Goudar4-2/+197
display Data Center bridging information in debug fs. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: chelsio: cxgb2: remove unused array pci_speedColin Ian King1-4/+0
Array pci_speed is defined but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: 'pci_speed' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10mlxsw: remove unused arrays mlxsw_i2c_driver_name and mlxsw_pci_driver_nameColin Ian King2-4/+0
Arrays mlxsw_i2c_driver_name and mlxsw_pci_driver_name are defined but never used hence they are redundant and can be removed. Cleans up clang warnings: warning: 'mlxsw_i2c_driver_name' defined but not used warning: 'mlxsw_pci_driver_name' defined but not used Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10cxgb4: update 1.20.8.0 as the latest firmware supportedGanesh Goudar1-6/+6
Change t4fw_version.h to update latest firmware version number to 1.20.8.0. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: allow to call netif_reset_xps_queues() under cpus_read_lockAndrei Vagin1-1/+3
The definition of static_key_slow_inc() has cpus_read_lock in place. In the virtio_net driver, XPS queues are initialized after setting the queue:cpu affinity in virtnet_set_affinity() which is already protected within cpus_read_lock. Lockdep prints a warning when we are trying to acquire cpus_read_lock when it is already held. This patch adds an ability to call __netif_set_xps_queue under cpus_read_lock(). Acked-by: Jason Wang <jasowang@redhat.com> ============================================ WARNING: possible recursive locking detected 4.18.0-rc3-next-20180703+ #1 Not tainted -------------------------------------------- swapper/0/1 is trying to acquire lock: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: static_key_slow_inc+0xe/0x20 but task is already holding lock: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(cpu_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by swapper/0/1: #0: 00000000244bc7da (&dev->mutex){....}, at: __driver_attach+0x5a/0x110 #1: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0 #2: 000000005cd8463f (xps_map_mutex){+.+.}, at: __netif_set_xps_queue+0x8d/0xc60 v2: move cpus_read_lock() out of __netif_set_xps_queue() Cc: "Nambiar, Amritha" <amritha.nambiar@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue") Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: phy: sftp: print debug message with text, not numbersAndrew Lunn1-4/+72
Convert the state numbers, device state, etc from numbers to strings when printing debug messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10ethernet/qlogic: remove unused array msi_tgt_statusColin Ian King1-7/+0
Array msi_tgt_status is defined but never used, hence it is redundant and can be removed. Cleans up clang warning: warning: 'msi_tgt_status' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: dsa: rtl8366rb: Support port 4 (WAN)Linus Walleij1-0/+30
The totally undocumented IO mode needs to be set to enumerator 0 to enable port 4 also known as WAN in most configurations, for ordinary traffic. The 3 bits in the register come up as 010 after reset, but need to be set to 000. The Realtek source code contains a name for these bits, but no explanation of what the 8 different IO modes may be. Set it to zero for the time being and drop a comment so people know what is going on if they run into trouble. This "mode zero" works fine with the D-Link DIR-685 with RTL8366RB. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10mlxsw: spectrum_flower: use PTR_ERR_OR_ZERO()YueHaibing1-3/+2
Fix ptr_ret.cocci warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c:543:1-3: WARNING: PTR_ERR_OR_ZERO can be used Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10be2net: Use Kconfig flag to support for enabling/disabling adaptersPetr Oros3-3/+63
Add flags to enable/disable supported chips in be2net. With disable support are removed coresponding PCI IDs and also codepaths with [BE2|BE3|BEx|lancer|skyhawk]_chip checks. Disable chip will reduce module size by: BE2 ~2kb BE3 ~3kb Lancer ~10kb Skyhawk ~9kb When enable skyhawk only it will reduce module size by ~20kb New help style in Kconfig Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Petr Oros <poros@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qede: Ingress tc flower offload (drop action) support.Manish Chopra4-11/+362
The main motive of this patch is to lay down driver's tc offload infrastructure in place. With these changes tc can offload various supported flow profiles (4 tuples, src-ip, dst-ip, l4 port) for the drop action. Dropped flows statistic is a global counter for all the offloaded flows for drop action and is populated in ethtool statistics as common "gft_filter_drop". Examples - tc qdisc add dev p4p1 ingress tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_ip 192.168.40.200 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto udp src_ip 192.168.40.100 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp src_ip 192.168.40.100 dst_ip 192.168.40.200 \ src_port 453 dst_port 876 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_port 98 action drop Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qede: Add destination ip based flow profile.Manish Chopra1-48/+66
This patch adds support for dropping and redirecting the flows based on destination IP in the packet. This also moves the profile mode settings in their own functions which can be used through tc flows in successive patch. For example - ethtool -N p5p1 flow-type tcp4 dst-ip 192.168.40.100 action -1 ethtool -N p5p1 flow-type udp4 dst-ip 192.168.50.100 action 1 ethtool -N p5p1 flow-type tcp4 dst-ip 192.168.60.100 action 0x100000000 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qed/qede: Multi CoS support.Manish Chopra6-49/+194
This patch adds support for tc mqprio offload, using this different traffic classes on the adapter can be utilized based on configured priority to tc map. For example - tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 This will cause SKBs with priority 0,1,2,3 to transmit over tc 0,1,2,3 hardware queues respectively. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10s390/qeth: use true and false for boolean valuesGustavo A. R. Silva1-2/+2
Return statements in functions returning bool should use true or false instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10s390/qeth: don't restrict qeth_card to DMA memoryJulian Wiedmann3-14/+19
Allocating the main qeth_card struct with GFP_DMA blocks us from moving it into netdev_priv(). But the only reason why we need DMA memory is the ccw1 structs embedded into each ccw channel. So extract those into separate allocations, like we already do for the cmd buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10s390/qeth: clean up card initializationJulian Wiedmann1-34/+10
The qeth_card struct is kzalloc-ed, so remove all the redundant 0-initializations. While at it, split up what's left of qeth_determine_card_type(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10s390/qeth: do basic setup for data channelJulian Wiedmann1-9/+15
The data channel currently doesn't need a setup operation, because we don't use pre-allocated cmd buffers for its IO. But subsequent changes will introduce further setup that also applies to the data channel. This refactors things a bit, so that the new stuff can then be automatically applied to all channels. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10s390/qeth: use qeth_setup_ccw() to set up all CCWsJulian Wiedmann4-43/+16
Re-work the helper a little bit, so that it can be used for all CCWs that qeth issues. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10s390/qeth: reduce hard-coded access to ccw channelsJulian Wiedmann2-28/+31
Where possible use accessor macros and local pointers to access the ccw channels. This makes it less likely to miss a spot. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10s390/qeth: extract helper for MPC protocol typeJulian Wiedmann3-24/+15
Just a little code deduplication. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller8-34/+81
Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst adding some tracepoints. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add the bindings parsing for XGMAC2Jose Abreu2-0/+8
Add the bindings parsing for XGMAC2 IP block. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Integrate XGMAC into main driver flowJose Abreu1-19/+48
Now that we have all the XGMAC related callbacks, lets start integrating this IP block into main driver. Also, we corrected the initialization flow to only start DMA after setting descriptors length. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add PTP support for XGMAC2Jose Abreu3-4/+7
XGMAC2 uses the same engine of timestamping as GMAC4. Let's use the same callbacks. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add MDIO related functions for XGMAC2Jose Abreu1-4/+129
Add the MDIO related funcionalities for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add descriptor related callbacks for XGMAC2Jose Abreu5-2/+314
Add the descriptor related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add DMA related callbacks for XGMAC2Jose Abreu5-2/+471
Add the DMA related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add MAC related callbacks for XGMAC2Jose Abreu6-3/+519
Add the MAC related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add XGMAC 2.10 HWIF entryJose Abreu2-8/+37
Add a new entry to HWIF table for XGMAC 2.10. For now we fill it with empty callbacks which will be added in posterior patches. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Re-setup interrupts on CMODE change.Andrew Lunn3-2/+27
When a port changes CMODE, the SERDES interface being used can change. Disable interrupts for the old SERDES interface, and enable interrupts on the new. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add SERDES phydev_mac_change up for 6390Andrew Lunn4-0/+222
phylink wants to know when the MAC layers notices a change in the link. For the 6390 family, this is a change in the SERDES state. Add interrupt support for the SERDES interface used to implement SGMII/1000Base-X/2500Base-X. This is currently limited to ports 9 and 10. Support for the 10G SERDES and other ports will be added later, building on this basic framework. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: link mv88e6xxx_port to mv88e6xxx_chipAndrew Lunn2-0/+5
An up coming change will register interrupts for individual switch ports, using the mv88e6xxx_port as the interrupt context information. Add members to the mv88e6xxx_port structure so we can link it back to the mv88e6xxx_chip member the port belongs to and the port number of the port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Power on/off SERDES on cmode changeAndrew Lunn1-0/+9
The 6390 family has a number of SERDES interfaces per port. When the cmode changes, eg 1000Base-X to XAUI, the SERDES interface in use will also change. Power down the old SERDES interface and power up the new SERDES interface. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Cache the port cmodeAndrew Lunn5-47/+57
The ports CMODE indicates the type of link between the MAC and the PHY. It is used often in the SERDES code. Rather than read it each time, cache its value. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: 2500Base-X uses the 1000Base-X SERDESAndrew Lunn1-1/+1
The 6390 has three different SERDES interface types. 2500Base-X is implemented by the SGMII/1000Base-X SERDES. So power on/off the correct SERDES. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add serdes register read/write helperAndrew Lunn2-11/+25
Add a helper for accessing SERDES registers of the 6390 family. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Rename sgmii/10g power functionsAndrew Lunn1-6/+8
There is a need to add more functions manipulating the SERDES interfaces. Cleanup the namespace. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: 6390 vs 6390X SERDES supportAndrew Lunn3-3/+53
The 6390 has two SERDES interfaces, used by ports 9 and 10. The 6390X has eight SERDES interfaces. These allow ports 9 and 10 to do 10G. Or if lower speeds are used, some of the SERDES interfaces can be used by ports 2-8 for 1000Base-X. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Refactor SERDES lane codeAndrew Lunn1-81/+114
The 6390 family has 8 SERDES lanes. What ports use these lanes depends on how ports 9 and 10 are configured. If 9 and 10 does not make use of a line, one of the lower ports can use it. Add a function to return the lane a port is using, if any, and simplify the code to power up/down the lane. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: add phylink supportRussell King4-4/+217
Add rudimentary phylink support to mv88e6xxx. TODO: - needs to call phylink_mac_change() when the port link comes up/goes down. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09phylink: add helper for configuring 2500BaseX modesRussell King1-0/+30
Add a helper for MAC drivers to use in their validate callback to deal with 2500BaseX vs 1000BaseX modes, where the hardware supports both but it is not possible to automatically select between them. This helper defaults to 1000BaseX, as that is the 802.3 standard, and will allow users to select 2500BaseX either by forcing the speed if AN is disabled, or by changing the advertising mask if AN is enabled. Disabling AN is not recommended as it is only the speed that we're interested in controlling, not the duplex or pause mode parameters. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add support to enabling pauseAndrew Lunn4-4/+48
The 6185 can enable/disable 802.3z pause be setting the MyPause bit in the port status register. Add an op to support this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09Bluetooth: Introduce BT_HCIUART_RTL configuration optionMarcel Holtmann2-0/+17
Like all the other UART protocols, introduce a configuration option for Realtek based serial devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-08-09mlxsw: spectrum: Expose counter for all 16 TCsPetr Machata1-5/+6
Before MC-aware mode was enabled in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"), only 8 traffic classes were used. Under MC-aware regime, however, besides using TCs 0-7 for UC traffic, it additionally uses TCs 8-15 for BUM traffic. It is therefore desirable to show counters for these TCs as well. Update ethtool stats pool length, mlxsw_sp_port_get_strings() and mlxsw_sp_port_get_stats() to include artifacts for all 16 TCs. For consistency and simplicity, expose tc_no_buffer_discard_uc_tc for BUM TCs as well, even though it ought to stay at 0 all the time. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: spectrum: Include RFC-2819 counters in stats lengthPetr Machata1-0/+1
The function mlxsw_sp_port_get_sset_count() is supposed to return the total number of ethtool strings that mlxsw supports. Specifically for names of statistic counters (the only string type that mlxsw supports as of now), that number is stored in MLXSW_SP_PORT_ETHTOOL_STATS_LEN. However, when adding RFC-2891 counters, that define wasn't updated to include the new counters. As a result, ethtool snips out the counters towards the end of the list, which contains per-TC counters, and only the first three traffic classes end up being reported. Fix by adding MLXSW_SP_PORT_HW_RFC_2819_STATS_LEN as appropriate. Fixes: 1222d15a01c7 ("mlxsw: spectrum: Expose counters for various packet sizes") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: Replace license text with SPDX identifiers and adjust copyrightsJiri Pirko64-2139/+131
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: spectrum: Reset FW after flashJiri Pirko3-5/+24
Recent FW fixes a bug and allows to load newly flashed FW image after reset. So make sure the reset happens after flash. Indicate the need down to PCI layer by -EAGAIN. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: spectrum: Update the supported firmware to version 13.1702.6Nir Dotan1-2/+2
This new firmware contains: - Support for new types of cables - Support for flashing future firmware without reboot - Support for Router ARP BC and UC traps Signed-off-by: Nir Dotan <nird@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: spectrum_flower: Disallow usage of vlan_id key on egressNir Dotan3-0/+17
As recent spectrum FW imposes a limitation on using vlan_id key for egress ACL, disallow the usage of that key accordingly and return a proper extack message. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-11 09:00:37 +0300