summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-04-13drm/msm: Use the correct dma_sync calls in msm_gemRob Clark1-5/+42
commit 3de433c5b38af49a5fc7602721e2ab5d39f1e69c upstream. [subject was: drm/msm: shake fist angrily at dma-mapping] So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but it falls appart with dma direct ops. The problem is that, depending on display generation, we can have either set of dma ops (mdp4 and dpu have iommu wired to mdss node, which maps to toplevel drm device, but mdp5 has iommu wired up to the mdp sub-node within mdss). Fixes this splat on mdp5 devices: Unable to handle kernel paging request at virtual address ffffffff80000000 Mem abort info: ESR = 0x96000144 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000144 CM = 1, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000 [ffffffff80000000] pgd=0000000000000000 Internal error: Oops: 96000144 [#1] SMP Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1 Hardware name: Samsung Galaxy A5U (EUR) (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __clean_dcache_area_poc+0x20/0x38 lr : arch_sync_dma_for_device+0x28/0x30 sp : ffff0000115736a0 x29: ffff0000115736a0 x28: 0000000000000001 x27: ffff800074830800 x26: ffff000011478000 x25: 0000000000000000 x24: 0000000000000001 x23: ffff000011478a98 x22: ffff800009fd1c10 x21: 0000000000000001 x20: ffff800075ad0a00 x19: 0000000000000000 x18: ffff0000112b2000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000fffffff0 x14: ffff000011455d70 x13: 0000000000000000 x12: 0000000000000028 x11: 0000000000000001 x10: ffff00001106c000 x9 : ffff7e0001d6b380 x8 : 0000000000001000 x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382 x5 : 0000000000000000 x4 : 0000000000001000 x3 : 000000000000003f x2 : 0000000000000040 x1 : ffffffff80001000 x0 : ffffffff80000000 Call trace: __clean_dcache_area_poc+0x20/0x38 dma_direct_sync_sg_for_device+0xb8/0xe8 get_pages+0x22c/0x250 [msm] msm_gem_get_and_pin_iova+0xdc/0x168 [msm] ... Fixes the combination of two patches: Fixes: 0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache) Fixes: 449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device) Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Rob Clark <robdclark@chromium.org> [seanpaul changed subject to something more desriptive] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com Cc: nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13drm_dp_mst_topology: fix broken drm_dp_sideband_parse_remote_dpcd_read()Hans Verkuil1-0/+1
commit a4c30a4861c54af78c4eb8b7855524c1a96d9f80 upstream. When parsing the reply of a DP_REMOTE_DPCD_READ DPCD command the result is wrong due to a missing idx increment. This was never noticed since DP_REMOTE_DPCD_READ is currently not used, but if you enable it, then it is all wrong. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/e72ddac2-1dc0-100a-d816-9ac98ac009dd@xs4all.nl Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13usb: dwc3: don't set gadget->is_otg flagRoger Quadros1-1/+0
commit c09b73cfac2a9317f1104169045c519c6021aa1d upstream. This reverts commit 6a4290cc28be1 ("usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.") We don't yet support any of the OTG mechanisms (HNP/SRP/ADP) and are not setting gadget->otg_caps, so don't set gadget->is_otg flag. If we do then we end up publishing a OTG1.0 descriptor in the gadget descriptor which causes device enumeration to fail if we are connected to a host with CONFIG_USB_OTG enabled. Host side log without this patch [ 96.720453] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 96.901391] usb 1-1: Dual-Role OTG device on non-HNP port [ 96.907552] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.060447] usb 1-1: new high-speed USB device number 3 using xhci-hcd [ 97.241378] usb 1-1: Dual-Role OTG device on non-HNP port [ 97.247536] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.253606] usb usb1-port1: attempt power cycle [ 97.960449] usb 1-1: new high-speed USB device number 4 using xhci-hcd [ 98.141383] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.147540] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.300453] usb 1-1: new high-speed USB device number 5 using xhci-hcd [ 98.481391] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.487545] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.493532] usb usb1-port1: unable to enumerate USB device Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13rpmsg: glink: Remove chunk size word align warningChris Lew1-3/+0
commit f0beb4ba9b185d497c8efe7b349363700092aee0 upstream. It is possible for the chunk sizes coming from the non RPM remote procs to not be word aligned. Remove the alignment warning and continue to read from the FIFO so execution is not stalled. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13drm/msm: stop abusing dma_map/unmap for cacheRob Clark1-2/+2
commit 0036bc73ccbe7e600a3468bf8e8879b122252274 upstream. Recently splats like this started showing up: WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0 Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G W 5.2.0-rc5-next-20190619+ #2317 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018 Workqueue: msm msm_gem_free_work [msm] pstate: 80c00005 (Nzcv daif +PAN +UAO) pc : __iommu_dma_unmap+0xb8/0xc0 lr : __iommu_dma_unmap+0x54/0xc0 sp : ffff0000119abce0 x29: ffff0000119abce0 x28: 0000000000000000 x27: ffff8001f9946648 x26: ffff8001ec271068 x25: 0000000000000000 x24: ffff8001ea3580a8 x23: ffff8001f95ba010 x22: ffff80018e83ba88 x21: ffff8001e548f000 x20: fffffffffffff000 x19: 0000000000001000 x18: 00000000c00001fe x17: 0000000000000000 x16: 0000000000000000 x15: ffff000015b70068 x14: 0000000000000005 x13: 0003142cc1be1768 x12: 0000000000000001 x11: ffff8001f6de9100 x10: 0000000000000009 x9 : ffff000015b78000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : fffffffffffff000 x5 : 0000000000000fff x4 : ffff00001065dbc8 x3 : 000000000000000d x2 : 0000000000001000 x1 : fffffffffffff000 x0 : 0000000000000000 Call trace: __iommu_dma_unmap+0xb8/0xc0 iommu_dma_unmap_sg+0x98/0xb8 put_pages+0x5c/0xf0 [msm] msm_gem_free_work+0x10c/0x150 [msm] process_one_work+0x1e0/0x330 worker_thread+0x40/0x438 kthread+0x12c/0x130 ret_from_fork+0x10/0x18 ---[ end trace afc0dc5ab81a06bf ]--- Not quite sure what triggered that, but we really shouldn't be abusing dma_{map,unmap}_sg() for cache maint. Cc: Stephen Boyd <sboyd@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190630124735.27786-1-robdclark@gmail.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13clk: qcom: rcg: Return failure for RCG updateTaniya Das1-1/+1
commit 21ea4b62e1f3dc258001a68da98c9663a9dbd6c7 upstream. In case of update config failure, return -EBUSY, so that consumers could handle the failure gracefully. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13fbcon: fix null-ptr-deref in fbcon_switchQiujun Huang1-0/+3
commit b139f8b00db4a8ea75a4174346eafa48041aa489 upstream. Set logo_shown to FBCON_LOGO_CANSHOW when the vc was deallocated. syzkaller report: https://lkml.org/lkml/2020/3/27/403 general protection fault, probably for non-canonical address 0xdffffc000000006c: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367] RIP: 0010:fbcon_switch+0x28f/0x1740 drivers/video/fbdev/core/fbcon.c:2260 Call Trace: redraw_screen+0x2a8/0x770 drivers/tty/vt/vt.c:1008 vc_do_resize+0xfe7/0x1360 drivers/tty/vt/vt.c:1295 fbcon_init+0x1221/0x1ab0 drivers/video/fbdev/core/fbcon.c:1219 visual_init+0x305/0x5c0 drivers/tty/vt/vt.c:1062 do_bind_con_driver+0x536/0x890 drivers/tty/vt/vt.c:3542 do_take_over_console+0x453/0x5b0 drivers/tty/vt/vt.c:4122 do_fbcon_takeover+0x10b/0x210 drivers/video/fbdev/core/fbcon.c:588 fbcon_fb_registered+0x26b/0x340 drivers/video/fbdev/core/fbcon.c:3259 do_register_framebuffer drivers/video/fbdev/core/fbmem.c:1664 [inline] register_framebuffer+0x56e/0x980 drivers/video/fbdev/core/fbmem.c:1832 dlfb_usb_probe.cold+0x1743/0x1ba3 drivers/video/fbdev/udlfb.c:1735 usb_probe_interface+0x310/0x800 drivers/usb/core/driver.c:374 accessing vc_cons[logo_shown].d->vc_top causes the bug. Reported-by: syzbot+732528bae351682f1f27@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200329085647.25133-1-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13RDMA/cm: Update num_paths in cma_resolve_iboe_route error flowAvihai Horon1-0/+1
commit 987914ab841e2ec281a35b54348ab109b4c0bb4e upstream. After a successful allocation of path_rec, num_paths is set to 1, but any error after such allocation will leave num_paths uncleared. This causes to de-referencing a NULL pointer later on. Hence, num_paths needs to be set back to 0 if such an error occurs. The following crash from syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0 Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89 45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6 14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffff88006586f980 EFLAGS: 00010207 RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475 RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72 R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30 R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200 FS: 00000000016fc880(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_copy_path_rec_from_user+0xcc0/0xcc0 ? __mutex_unlock_slowpath+0xfc/0x670 ? wait_for_completion+0x3b0/0x3b0 ? ucma_query_route+0x818/0xc60 ucma_query_route+0x818/0xc60 ? ucma_listen+0x1b0/0x1b0 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 ? ucma_listen+0x1b0/0x1b0 ? ucma_write+0x292/0x460 ucma_write+0x292/0x460 ? ucma_close_id+0x60/0x60 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 __vfs_write+0xf7/0x620 ? ucma_close_id+0x60/0x60 ? kernel_read+0x110/0x110 ? time_hardirqs_on+0x19/0x580 ? lock_acquire+0x18b/0x3a0 ? finish_task_switch+0xf3/0x5d0 ? _raw_spin_unlock_irq+0x29/0x40 ? _raw_spin_unlock_irq+0x29/0x40 ? finish_task_switch+0x1be/0x5d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? security_file_permission+0x172/0x1e0 vfs_write+0x192/0x460 ksys_write+0xc6/0x1a0 ? __ia32_sys_read+0xb0/0xb0 ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe ? do_syscall_64+0x1d/0x470 do_syscall_64+0x9e/0x470 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices") Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.org Signed-off-by: Avihai Horon <avihaih@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13RDMA/cma: Teach lockdep about the order of rtnl and lockJason Gunthorpe1-0/+13
commit 32ac9e4399b12d3e54d312a0e0e30ed5cd19bd4e upstream. This lock ordering only happens when bonding is enabled and a certain bonding related event fires. However, since it can happen this is a global restriction on lock ordering. Teach lockdep about the order directly and unconditionally so bugs here are found quickly. See https://syzkaller.appspot.com/bug?extid=55de90ab5f44172b0c90 Link: https://lore.kernel.org/r/20200227203651.GA27185@ziepe.ca Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13RDMA/ucma: Put a lock around every call to the rdma_cm layerJason Gunthorpe1-2/+47
commit 7c11910783a1ea17e88777552ef146cace607b3c upstream. The rdma_cm must be used single threaded. This appears to be a bug in the design, as it does have lots of locking that seems like it should allow concurrency. However, when it is all said and done every single place that uses the cma_exch() scheme is broken, and all the unlocked reads from the ucma of the cm_id data are wrong too. syzkaller has been finding endless bugs related to this. Fixing this in any elegant way is some enormous amount of work. Take a very big hammer and put a mutex around everything to do with the ucma_context at the top of every syscall. Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Link: https://lore.kernel.org/r/20200218210432.GA31966@ziepe.ca Reported-by: syzbot+adb15cf8c2798e4e0db4@syzkaller.appspotmail.com Reported-by: syzbot+e5579222b6a3edd96522@syzkaller.appspotmail.com Reported-by: syzbot+4b628fcc748474003457@syzkaller.appspotmail.com Reported-by: syzbot+29ee8f76017ce6cf03da@syzkaller.appspotmail.com Reported-by: syzbot+6956235342b7317ec564@syzkaller.appspotmail.com Reported-by: syzbot+b358909d8d01556b790b@syzkaller.appspotmail.com Reported-by: syzbot+6b46b135602a3f3ac99e@syzkaller.appspotmail.com Reported-by: syzbot+8458d13b13562abf6b77@syzkaller.appspotmail.com Reported-by: syzbot+bd034f3fdc0402e942ed@syzkaller.appspotmail.com Reported-by: syzbot+c92378b32760a4eef756@syzkaller.appspotmail.com Reported-by: syzbot+68b44a1597636e0b342c@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13IB/hfi1: Fix memory leaks in sysfs registration and unregistrationKaike Wan1-2/+11
commit 5c15abc4328ad696fa61e2f3604918ed0c207755 upstream. When the hfi1 driver is unloaded, kmemleak will report the following issue: unreferenced object 0xffff8888461a4c08 (size 8): comm "kworker/0:0", pid 5, jiffies 4298601264 (age 2047.134s) hex dump (first 8 bytes): 73 64 6d 61 30 00 ff ff sdma0... backtrace: [<00000000311a6ef5>] kvasprintf+0x62/0xd0 [<00000000ade94d9f>] kobject_set_name_vargs+0x1c/0x90 [<0000000060657dbb>] kobject_init_and_add+0x5d/0xb0 [<00000000346fe72b>] 0xffffffffa0c5ecba [<000000006cfc5819>] 0xffffffffa0c866b9 [<0000000031c65580>] 0xffffffffa0c38e87 [<00000000e9739b3f>] local_pci_probe+0x41/0x80 [<000000006c69911d>] work_for_cpu_fn+0x16/0x20 [<00000000601267b5>] process_one_work+0x171/0x380 [<0000000049a0eefa>] worker_thread+0x1d1/0x3f0 [<00000000909cf2b9>] kthread+0xf8/0x130 [<0000000058f5f874>] ret_from_fork+0x35/0x40 This patch fixes the issue by: - Releasing dd->per_sdma[i].kobject in hfi1_unregister_sysfs(). - This will fix the memory leak. - Calling kobject_put() to unwind operations only for those entries in dd->per_sdma[] whose operations have succeeded (including the current one that has just failed) in hfi1_verbs_register_sysfs(). Cc: <stable@vger.kernel.org> Fixes: 0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup") Link: https://lore.kernel.org/r/20200326163807.21129.27371.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13IB/hfi1: Call kobject_put() when kobject_init_and_add() failsKaike Wan1-5/+8
commit dfb5394f804ed4fcea1fc925be275a38d66712ab upstream. When kobject_init_and_add() returns an error in the function hfi1_create_port_files(), the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13hwrng: imx-rngc - fix an error pathMartin Kaiser1-1/+3
commit 47a1f8e8b3637ff5f7806587883d7d94068d9ee8 upstream. Make sure that the rngc interrupt is masked if the rngc self test fails. Self test failure means that probe fails as well. Interrupts should be masked in this case, regardless of the error. Cc: stable@vger.kernel.org Fixes: 1d5449445bd0 ("hwrng: mx-rngc - add a driver for Freescale RNGC") Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13usb: dwc3: gadget: Wrap around when skip TRBsThinh Nguyen1-1/+1
commit 2dedea035ae82c5af0595637a6eda4655532b21e upstream. When skipping TRBs, we need to account for wrapping around the ring buffer and not modifying some invalid TRBs. Without this fix, dwc3 won't be able to check for available TRBs. Cc: stable <stable@vger.kernel.org> Fixes: 7746a8dfb3f9 ("usb: dwc3: gadget: extract dwc3_gadget_ep_skip_trbs()") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13random: always use batched entropy for get_random_u{32,64}Jason A. Donenfeld1-16/+4
commit 69efea712f5b0489e67d07565aad5c94e09a3e52 upstream. It turns out that RDRAND is pretty slow. Comparing these two constructions: for (i = 0; i < CHACHA_BLOCK_SIZE; i += sizeof(ret)) arch_get_random_long(&ret); and long buf[CHACHA_BLOCK_SIZE / sizeof(long)]; extract_crng((u8 *)buf); it amortizes out to 352 cycles per long for the top one and 107 cycles per long for the bottom one, on Coffee Lake Refresh, Intel Core i9-9880H. And importantly, the top one has the drawback of not benefiting from the real rng, whereas the bottom one has all the nice benefits of using our own chacha rng. As get_random_u{32,64} gets used in more places (perhaps beyond what it was originally intended for when it was introduced as get_random_{int,long} back in the md5 monstrosity era), it seems like it might be a good thing to strengthen its posture a tiny bit. Doing this should only be stronger and not any weaker because that pool is already initialized with a bunch of rdrand data (when available). This way, we get the benefits of the hardware rng as well as our own rng. Another benefit of this is that we no longer hit pitfalls of the recent stream of AMD bugs in RDRAND. One often used code pattern for various things is: do { val = get_random_u32(); } while (hash_table_contains_key(val)); That recent AMD bug rendered that pattern useless, whereas we're really very certain that chacha20 output will give pretty distributed numbers, no matter what. So, this simplification seems better both from a security perspective and from a performance perspective. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200221201037.30231-1-Jason@zx2c4.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLEPetr Machata1-3/+5
[ Upstream commit ccfc569347f870830e7c7cf854679a06cf9c45b5 ] The handler for FLOW_ACTION_VLAN_MANGLE ends by returning whatever the lower-level function that it calls returns. If there are more actions lined up after this action, those are never offloaded. Fix by only bailing out when the called function returns an error. Fixes: a150201a70da ("mlxsw: spectrum: Add support for vlan modify TC action") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13slcan: Don't transmit uninitialized stack data in paddingRichard Palethorpe1-3/+1
[ Upstream commit b9258a2cece4ec1f020715fe3554bc2e360f6264 ] struct can_frame contains some padding which is not explicitly zeroed in slc_bump. This uninitialized data will then be transmitted if the stack initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL). This commit just zeroes the whole struct including the padding. Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Fixes: a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters") Reviewed-by: Kees Cook <keescook@chromium.org> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: security@kernel.org Cc: wg@grandegger.com Cc: mkl@pengutronix.de Cc: davem@davemloft.net Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: stmmac: dwmac1000: fix out-of-bounds mac address reg settingJisheng Zhang1-1/+1
[ Upstream commit 3e1221acf6a8f8595b5ce354bab4327a69d54d18 ] Commit 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries") cleared the unused mac address entries, but introduced an out-of bounds mac address register programming bug -- After setting the secondary unicast mac addresses, the "reg" value has reached netdev_uc_count() + 1, thus we should only clear address entries if (addr < perfect_addr_number) Fixes: 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before ↵Oleksij Rempel1-0/+7
accessing PHY registers [ Upstream commit 6110dff776f7fa65c35850ef65b41d3b39e2fac2 ] After the power-down bit is cleared, the chip internally triggers a global reset. According to the KSZ9031 documentation, we have to wait at least 1ms for the reset to finish. If the chip is accessed during reset, read will return 0xffff, while write will be ignored. Depending on the system performance and MDIO bus speed, we may or may not run in to this issue. This bug was discovered on an iMX6QP system with KSZ9031 PHY and attached PHY interrupt line. If IRQ was used, the link status update was lost. In polling mode, the link status update was always correct. The investigation showed, that during a read-modify-write access, the read returned 0xffff (while the chip was still in reset) and corresponding write hit the chip _after_ reset and triggered (due to the 0xffff) another reset in an undocumented bit (register 0x1f, bit 1), resulting in the next write being lost due to the new reset cycle. This patch fixes the issue by adding a 1...2 ms sleep after the genphy_resume(). Fixes: 836384d2501d ("net: phy: micrel: Add specific suspend") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: dsa: bcm_sf2: Ensure correct sub-node is parsedFlorian Fainelli1-1/+6
[ Upstream commit afa3b592953bfaecfb4f2f335ec5f935cff56804 ] When the bcm_sf2 was converted into a proper platform device driver and used the new dsa_register_switch() interface, we would still be parsing the legacy DSA node that contained all the port information since the platform firmware has intentionally maintained backward and forward compatibility to client programs. Ensure that we do parse the correct node, which is "ports" per the revised DSA binding. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: dsa: bcm_sf2: Do not register slave MDIO bus with OFFlorian Fainelli1-1/+1
[ Upstream commit 536fab5bf5826404534a6c271f622ad2930d9119 ] We were registering our slave MDIO bus with OF and doing so with assigning the newly created slave_mii_bus of_node to the master MDIO bus controller node. This is a bad thing to do for a number of reasons: - we are completely lying about the slave MII bus is arranged and yet we still want to control which MDIO devices it probes. It was attempted before to play tricks with the bus_mask to perform that: https://www.spinics.net/lists/netdev/msg429420.html but the approach was rightfully rejected - the device_node reference counting is messed up and we are effectively doing a double probe on the devices we already probed using the master, this messes up all resources reference counts (such as clocks) The proper fix for this as indicated by David in his reply to the thread above is to use a platform data style registration so as to control exactly which devices we probe: https://www.spinics.net/lists/netdev/msg430083.html By using mdiobus_register(), our slave_mii_bus->phy_mask value is used as intended, and all the PHY addresses that must be redirected towards our slave MDIO bus is happening while other addresses get redirected towards the master MDIO bus. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13power: supply: axp288_charger: Add special handling for HP Pavilion x2 10Hans de Goede1-1/+56
commit 9c80662a74cd2a5d1113f5c69d027face963a556 upstream. Some HP Pavilion x2 10 models use an AXP288 for charging and fuel-gauge. We use a native power_supply / PMIC driver in this case, because on most models with an AXP288 the ACPI AC / Battery code is either completely missing or relies on custom / proprietary ACPI OpRegions which Linux does not implement. The native drivers mostly work fine, but there are 2 problems: 1. These model uses a Type-C connector for charging which the AXP288 does not support. As long as a Type-A charger (which uses the USB data pins for charger type detection) is used everything is fine. But if a Type-C charger is used (such as the charger shipped with the device) then the charger is not recognized. So we end up slowly discharging the device even though a charger is connected, because we are limiting the current from the charger to 500mA. To make things worse this happens with the device's official charger. Looking at the ACPI tables HP has "solved" the problem of the AXP288 not being able to recognize Type-C chargers by simply always programming the input-current-limit at 3000mA and relying on a Vhold setting of 4.7V (normally 4.4V) to limit the current intake if the charger cannot handle this. 2. If no charger is connected when the machine boots then it boots with the vbus-path disabled. On other devices this is done when a 5V boost converter is active to avoid the PMIC trying to charge from the 5V boost output. This is done when an OTG host cable is inserted and the ID pin on the micro-B receptacle is pulled low, the ID pin has an ACPI event handler associated with it which re-enables the vbus-path when the ID pin is pulled high when the OTG cable is removed. The Type-C connector has no ID pin, there is no ID pin handler and there appears to be no 5V boost converter, so we end up not charging because the vbus-path is disabled, until we unplug the charger which automatically clears the vbus-path disable bit and then on the second plug-in of the adapter we start charging. The HP Pavilion x2 10 models with an AXP288 do have mostly working ACPI AC / Battery code which does not rely on custom / proprietary ACPI OpRegions. So one possible solution would be to blacklist the AXP288 native power_supply drivers and add the HP Pavilion x2 10 with AXP288 DMI ids to the list of devices which should use the ACPI AC / Battery code even though they have an AXP288 PMIC. This would require changes to 4 files: drivers/acpi/ac.c, drivers/power/supply/axp288_charger.c, drivers/acpi/battery.c and drivers/power/supply/axp288_fuel_gauge.c. Beside needing adding the same DMI matches to 4 different files, this approach also triggers problem 2. from above, but then when suspended, during suspend the machine will not wakeup because the vbus path is disabled by the AML code when not charging, so the Vbus low-to-high IRQ is not triggered, the CPU never wakes up and the device does not charge even though the user likely things it is charging, esp. since the charge status LED is directly coupled to an adapter being plugged in and does not reflect actual charging. This could be worked by enabling vbus-path explicitly from say the axp288_charger driver's suspend handler. So neither situation is ideal, in both cased we need to explicitly enable the vbus-path to work around different variants of problem 2 above, this requires a quirk in the axp288_charger code. If we go the route of using the ACPI AC / Battery drivers then we need modifications to 3 other drivers; and we need to partially disable the axp288_charger code, while at the same time keeping it around to enable vbus-path on suspend. OTOH we can copy the hardcoding of 3A input-current-limit (we never touch Vhold, so that would stay at 4.7V) to the axp288_charger code, which needs changes regardless, then we concentrate all special handling of this interesting device model in the axp288_charger code. That is what this commit does. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1791098 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13extcon: axp288: Add wakeup supportHans de Goede1-0/+32
commit 9c94553099efb2ba873cbdddfd416a8a09d0e5f1 upstream. On devices with an AXP288, we need to wakeup from suspend when a charger is plugged in, so that we can do charger-type detection and so that the axp288-charger driver, which listens for our extcon events, can configure the input-current-limit accordingly. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13mei: me: add cedar fork device idsAlexander Usyskin2-0/+4
commit 99397d33b763dc554d118aaa38cc5abc6ce985de upstream. Add Cedar Fork (CDF) device ids, those belongs to the cannon point family. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200324210730.17672-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13misc: pci_endpoint_test: Avoid using module parameter to determine irqtypeKishon Vijay Abraham I1-3/+9
commit b2ba9225e0313b1de631a44b7b48c109032bffec upstream. commit e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") uses module parameter 'irqtype' in pci_endpoint_test_set_irq() to check if IRQ vectors of a particular type (MSI or MSI-X or LEGACY) is already allocated. However with multi-function devices, 'irqtype' will not correctly reflect the IRQ type of the PCI device. Fix it here by adding 'irqtype' for each PCI device to show the IRQ type of a particular PCI device. Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devicesKishon Vijay Abraham I1-1/+1
commit 6b443e5c80b67a7b8a85b33d052d655ef9064e90 upstream. Adding more than 10 pci-endpoint-test devices results in "kobject_add_internal failed for pci-endpoint-test.1 with -EEXIST, don't try to register things with the same name in the same directory". This is because commit 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device") limited the length of the "name" to 20 characters. Change the length of the name to 24 in order to support upto 10000 pci-endpoint-test devices. Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13misc: rtsx: set correct pcr_ops for rts522AYueHaibing1-0/+1
commit 10cea23b6aae15e8324f4101d785687f2c514fe5 upstream. rts522a should use rts522a_pcr_ops, which is diffrent with rts5227 in phy/hw init setting. Fixes: ce6a5acc9387 ("mfd: rtsx: Add support for rts522A") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13media: rc: IR signal for Panasonic air conditioner too longSean Young1-1/+1
commit 5c4c8b4a999019f19e770cb55cbacb89c95897bd upstream. The IR signal to control the Panasonic ACXA75C00600 air conditioner has 439 pulse/spaces. Increase limit to make it possible to transmit signal. Reported-by: Takashi Kanamaru <neuralassembly@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13drm/etnaviv: replace MMU flush marker with flush sequenceLucas Stach4-8/+11
commit 4900dda90af2cb13bc1d4c12ce94b98acc8fe64e upstream. If a MMU is shared between multiple GPUs, all of them need to flush their TLBs, so a single marker that gets reset on the first flush won't do. Replace the flush marker with a sequence number, so that it's possible to check if the TLB is in sync with the current page table state for each GPU. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13drm/amdgpu: fix typo for vcn1 idle checkJames Zhu1-1/+1
[ Upstream commit acfc62dc68770aa665cc606891f6df7d6d1e52c0 ] fix typo for vcn1 idle check Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-13drm/bochs: downgrade pci_request_region failure from error to warningGerd Hoffmann1-4/+2
[ Upstream commit 8c34cd1a7f089dc03933289c5d4a4d1489549828 ] Shutdown of firmware framebuffer has a bunch of problems. Because of this the framebuffer region might still be reserved even after drm_fb_helper_remove_conflicting_pci_framebuffers() returned. Don't consider pci_request_region() failure for the framebuffer region as fatal error to workaround this issue. Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-13drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017Mario Kleiner1-0/+11
[ Upstream commit dec9de2ada523b344eb2428abfedf9d6cd0a0029 ] This fixes a problem found on the MacBookPro 2017 Retina panel: The panel reports 10 bpc color depth in its EDID, and the firmware chooses link settings at boot which support enough bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2 aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports 2.7 Gbps (multiplier value 0xa) as possible, in direct contradiction of what the firmware successfully set up. This restricts the panel to 8 bpc, not providing the full color depth of the panel on Linux <= 5.5. Additionally, commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' introduced into Linux 5.6-rc1 will unclamp panel depth to its full 10 bpc, thereby requiring a eDP bandwidth for all modes that exceeds the bandwidth available and causes all modes to fail validation -> No modes for the laptop panel -> failure to set any mode -> Panel goes dark. This patch adds a quirk specific to the MBP 2017 15" Retina panel to override reported max link rate to the correct maximum of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display precision. Please apply for Linux 5.6+ to avoid regressing Apple MBP panel support. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-13nvme-rdma: Avoid double freeing of async event dataPrabhath Sajeepa1-3/+5
[ Upstream commit 9134ae2a2546cb96abddcd4469a79c77ee3a4480 ] The timeout of identify cmd, which is invoked as part of admin queue creation, can result in freeing of async event data both in nvme_rdma_timeout handler and error handling path of nvme_rdma_configure_admin queue thus causing NULL pointer reference. Call Trace: ? nvme_rdma_setup_ctrl+0x223/0x800 [nvme_rdma] nvme_rdma_create_ctrl+0x2ba/0x3f7 [nvme_rdma] nvmf_dev_write+0xa54/0xcc6 [nvme_fabrics] __vfs_write+0x1b/0x40 vfs_write+0xb2/0x1b0 ksys_write+0x61/0xd0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x60/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reviewed-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-02net: ks8851-ml: Fix IO operations, againMarek Vasut1-4/+52
commit 8262e6f9b1034ede34548a04dec4c302d92c9497 upstream. This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it turns out these were only necessary due to buggy hardware. This patch adds a check for such a buggy hardware to prevent any such mistakes again. While working further on the KS8851 driver, it came to light that the KS8851-16MLL is capable of switching bus endianness by a hardware strap, EESK pin. If this strap is incorrect, the IO accesses require such endian swapping as is being reverted by this patch. Such swapping also impacts the performance significantly. Hence, in addition to removing it, detect that the hardware is broken, report to user, and fail to bind with such hardware. Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access") Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 modelHans de Goede1-0/+15
commit 0c625ccfe6f754d0896b8881f5c85bcb81699f1f upstream. There are at least 3 models of the HP x2 10 models: Bay Trail SoC + AXP288 PMIC Cherry Trail SoC + AXP288 PMIC Cherry Trail SoC + TI PMIC Like on the other HP x2 10 models we need to ignore wakeup for ACPI GPIO events on the external embedded-controller pin to avoid spurious wakeups on the HP x2 10 CHT + AXP288 model too. This commit adds an extra DMI based quirk for the HP x2 10 CHT + AXP288 model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin on this model. This fixes spurious wakeups from suspend on this model. Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") Reported-and-tested-by: Marc Lehmann <schmorp@schmorp.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200302111225.6641-4-hdegoede@redhat.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02platform/x86: pmc_atom: Add Lex 2I385SW to critclk_systems DMI tableGeorg Müller1-0/+8
commit 95b31e35239e5e1689e3d965d692a313c71bd8ab upstream. The Lex 2I385SW board has two Intel I211 ethernet controllers. Without this patch, only the first port is usable. The second port fails to start with the following message: igb: probe of 0000:02:00.0 failed with error -2 Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Tested-by: Georg Müller <georgmueller@gmx.net> Signed-off-by: Georg Müller <georgmueller@gmx.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02vt: vt_ioctl: fix use-after-free in vt_in_use()Eric Biggers1-4/+12
commit 7cf64b18b0b96e751178b8d0505d8466ff5a448f upstream. vt_in_use() dereferences console_driver->ttys[i] without proper locking. This is broken because the tty can be closed and freed concurrently. We could fix this by using 'READ_ONCE(console_driver->ttys[i]) != NULL' and skipping the check of tty_struct::count. But, looking at console_driver->ttys[i] isn't really appropriate anyway because even if it is NULL the tty can still be in the process of being closed. Instead, fix it by making vt_in_use() require console_lock() and check whether the vt is allocated and has port refcount > 1. This works since following the patch "vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console" the port refcount is incremented while the vt is open. Reproducer (very unreliable, but it worked for me after a few minutes): #include <fcntl.h> #include <linux/vt.h> int main() { int fd, nproc; struct vt_stat state; char ttyname[16]; fd = open("/dev/tty10", O_RDONLY); for (nproc = 1; nproc < 8; nproc *= 2) fork(); for (;;) { sprintf(ttyname, "/dev/tty%d", rand() % 8); close(open(ttyname, O_RDONLY)); ioctl(fd, VT_GETSTATE, &state); } } KASAN report: BUG: KASAN: use-after-free in vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline] BUG: KASAN: use-after-free in vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657 Read of size 4 at addr ffff888065722468 by task syz-vt2/132 CPU: 0 PID: 132 Comm: syz-vt2 Not tainted 5.6.0-rc5-00130-g089b6d3654916 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 Call Trace: [...] vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline] vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660 [...] Allocated by task 136: [...] kzalloc include/linux/slab.h:669 [inline] alloc_tty_struct+0x96/0x8a0 drivers/tty/tty_io.c:2982 tty_init_dev+0x23/0x350 drivers/tty/tty_io.c:1334 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline] tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035 [...] Freed by task 41: [...] kfree+0xbf/0x200 mm/slab.c:3757 free_tty_struct+0x8d/0xb0 drivers/tty/tty_io.c:177 release_one_tty+0x22d/0x2f0 drivers/tty/tty_io.c:1468 process_one_work+0x7f1/0x14b0 kernel/workqueue.c:2264 worker_thread+0x8b/0xc80 kernel/workqueue.c:2410 [...] Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle") Cc: <stable@vger.kernel.org> # v3.4+ Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200322034305.210082-3-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual consoleEric Biggers2-9/+26
commit ca4463bf8438b403596edd0ec961ca0d4fbe0220 upstream. The VT_DISALLOCATE ioctl can free a virtual console while tty_release() is still running, causing a use-after-free in con_shutdown(). This occurs because VT_DISALLOCATE considers a virtual console's 'struct vc_data' to be unused as soon as the corresponding tty's refcount hits 0. But actually it may be still being closed. Fix this by making vc_data be reference-counted via the embedded 'struct tty_port'. A newly allocated virtual console has refcount 1. Opening it for the first time increments the refcount to 2. Closing it for the last time decrements the refcount (in tty_operations::cleanup() so that it happens late enough), as does VT_DISALLOCATE. Reproducer: #include <fcntl.h> #include <linux/vt.h> #include <sys/ioctl.h> #include <unistd.h> int main() { if (fork()) { for (;;) close(open("/dev/tty5", O_RDWR)); } else { int fd = open("/dev/tty10", O_RDWR); for (;;) ioctl(fd, VT_DISALLOCATE, 5); } } KASAN report: BUG: KASAN: use-after-free in con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278 Write of size 8 at addr ffff88806a4ec108 by task syz_vt/129 CPU: 0 PID: 129 Comm: syz_vt Not tainted 5.6.0-rc2 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 Call Trace: [...] con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278 release_tty+0xa8/0x410 drivers/tty/tty_io.c:1514 tty_release_struct+0x34/0x50 drivers/tty/tty_io.c:1629 tty_release+0x984/0xed0 drivers/tty/tty_io.c:1789 [...] Allocated by task 129: [...] kzalloc include/linux/slab.h:669 [inline] vc_allocate drivers/tty/vt/vt.c:1085 [inline] vc_allocate+0x1ac/0x680 drivers/tty/vt/vt.c:1066 con_install+0x4d/0x3f0 drivers/tty/vt/vt.c:3229 tty_driver_install_tty drivers/tty/tty_io.c:1228 [inline] tty_init_dev+0x94/0x350 drivers/tty/tty_io.c:1341 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline] tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035 [...] Freed by task 130: [...] kfree+0xbf/0x1e0 mm/slab.c:3757 vt_disallocate drivers/tty/vt/vt_ioctl.c:300 [inline] vt_ioctl+0x16dc/0x1e30 drivers/tty/vt/vt_ioctl.c:818 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660 [...] Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle") Cc: <stable@vger.kernel.org> # v3.4+ Reported-by: syzbot+522643ab5729b0421998@syzkaller.appspotmail.com Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200322034305.210082-2-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02vt: vt_ioctl: remove unnecessary console allocation checksEric Biggers1-19/+2
commit 1aa6e058dd6cd04471b1f21298270014daf48ac9 upstream. The vc_cons_allocated() checks in vt_ioctl() and vt_compat_ioctl() are unnecessary because they can only be reached by calling ioctl() on an open tty, which implies the corresponding virtual console is allocated. And even if the virtual console *could* be freed concurrently, then these checks would be broken since they aren't done under console_lock, and the vc_data is dereferenced before them anyway. So, remove these unneeded checks to avoid confusion. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200224080326.295046-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02vt: switch vt_dont_switch to boolJiri Slaby1-3/+3
commit f400991bf872debffb01c46da882dc97d7e3248e upstream. vt_dont_switch is pure boolean, no need for whole char. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200219073951.16151-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlinesJiri Slaby1-7/+22
commit e587e8f17433ddb26954f0edf5b2f95c42155ae9 upstream. These two were macros. Switch them to static inlines, so that it's more understandable what they are doing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200219073951.16151-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02vt: selection, introduce vc_is_selJiri Slaby3-4/+10
commit dce05aa6eec977f1472abed95ccd71276b9a3864 upstream. Avoid global variables (namely sel_cons) by introducing vc_is_sel. It checks whether the parameter is the current selection console. This will help putting sel_cons to a struct later. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200219073951.16151-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02media: xirlink_cit: add missing descriptor sanity checksJohan Hovold1-1/+17
commit a246b4d547708f33ff4d4b9a7a5dbac741dc89d8 upstream. Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays. This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors. Note that the sanity check in cit_get_packet_size() is not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide. Fixes: 659fefa0eb17 ("V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01") Fixes: 59f8b0bf3c12 ("V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 alt setting") Cc: stable <stable@vger.kernel.org> # 2.6.37 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02media: stv06xx: add missing descriptor sanity checksJohan Hovold2-1/+22
commit 485b06aadb933190f4bc44e006076bc27a23f205 upstream. Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays. This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors. Note that the sanity checks in stv06xx_start() and pb0100_start() are not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide. Fixes: 8668d504d72c ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor") Fixes: c0b33bdc5b8d ("[media] gspca-stv06xx: support bandwidth changing") Cc: stable <stable@vger.kernel.org> # 2.6.31 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02media: dib0700: fix rc endpoint lookupJohan Hovold1-2/+2
commit f52981019ad8d6718de79b425a574c6bddf81f7c upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: c4018fa2e4c0 ("[media] dib0700: fix RC support on Hauppauge Nova-TD") Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02media: ov519: add missing endpoint sanity checksJohan Hovold1-0/+10
commit 998912346c0da53a6dbb71fab3a138586b596b30 upstream. Make sure to check that we have at least one endpoint before accessing the endpoint array to avoid dereferencing a NULL-pointer on stream start. Note that these sanity checks are not redundant as the driver is mixing looking up altsettings by index and by number, which need not coincide. Fixes: 1876bb923c98 ("V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge") Fixes: b282d87332f5 ("V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)") Cc: stable <stable@vger.kernel.org> # 2.6.31 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02ahci: Add Intel Comet Lake H RAID PCI IDKai-Heng Feng1-0/+1
commit 32d2545462c6cede998267b86e57cda5d1dc2225 upstream. Add the PCI ID to the driver list to support this new device. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callbackQiujun Huang1-0/+2
commit 1165dd73e811a07d947aee218510571f516081f6 upstream. We can't handle the case length > WLAN_DATA_MAXLEN. Because the size of rxfrm->data is WLAN_DATA_MAXLEN(2312), and we can't read more than that. Thanks-to: Hillf Danton <hdanton@sina.com> Reported-and-tested-by: syzbot+7d42d68643a35f71ac8a@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326131850.17711-1-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usbQiujun Huang1-0/+1
commit a1f165a6b738f0c9d744bad4af7a53909278f5fc upstream. We should cancel hw->usb_work before kfree(hw). Reported-by: syzbot+6d2e7f6fa90e27be9d62@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1585120006-30042-1-git-send-email-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device tableLarry Finger1-0/+1
commit 38ef48f7d4b7342f145a1b4f96023bde99aeb245 upstream. The ASUS USB-N10 Nano B1 has been reported as a new RTL8188EU device. Add it to the device tables. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: kovi <zraetn@gmail.com> Cc: Stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200321180011.26153-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-19 19:21:51 +0300