summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds12-46/+88
Pull networking fixes from David Miller: 1) Fix BPF divides by zero, from Eric Dumazet and Alexei Starovoitov. 2) Reject stores into bpf context via st and xadd, from Daniel Borkmann. 3) Fix a memory leak in TUN, from Cong Wang. 4) Disable RX aggregation on a specific troublesome configuration of r8152 in a Dell TB16b dock. 5) Fix sw_ctx leak in tls, from Sabrina Dubroca. 6) Fix program replacement in cls_bpf, from Daniel Borkmann. 7) Fix uninitialized station_info structures in cfg80211, from Johannes Berg. 8) Fix miscalculation of transport header offset field in flow dissector, from Eric Dumazet. 9) Fix LPM tree leak on failure in mlxsw driver, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits) ibmvnic: Fix IPv6 packet descriptors ibmvnic: Fix IP offload control buffer ipv6: don't let tb6_root node share routes with other node ip6_gre: init dev->mtu and dev->hard_header_len correctly mlxsw: spectrum_router: Free LPM tree upon failure flow_dissector: properly cap thoff field fm10k: mark PM functions as __maybe_unused cfg80211: fix station info handling bugs netlink: reset extack earlier in netlink_rcv_skb can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once bpf: mark dst unknown on inconsistent {s, u}bounds adjustments bpf: fix cls_bpf on filter replace Net: ethernet: ti: netcp: Fix inbound ping crash if MTU size is greater than 1500 tls: reset crypto_info when do_tls_setsockopt_tx fails tls: return -EBUSY if crypto_info is already set tls: fix sw_ctx leak net/tls: Only attach to sockets in ESTABLISHED state net: fs_enet: do not call phy_stop() in interrupts r8152: disable RX aggregation on Dell TB16 dock ...
2018-01-19ibmvnic: Fix IPv6 packet descriptorsThomas Falcon1-9/+11
Packet descriptor generation for IPv6 is broken. Properly set L3 and L4 protocol flags for IPv6 descriptors. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19ibmvnic: Fix IP offload control bufferThomas Falcon1-0/+4
Set some missing fields in the IP control offload buffer. This buffer is used to enable checksum and TCP segmentation offload in the VNIC server. The buffer length field and the checksum offloading bits were not set properly, so fix that here. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19mlxsw: spectrum_router: Free LPM tree upon failureIdo Schimmel1-6/+14
When a new LPM tree is created, we try to replace the trees in the existing virtual routers with it. If we fail, the tree needs to be freed. Currently, this does not happen in the unlikely case where we fail to bind the tree to the first virtual router, since its reference count never transitions from 1 to 0. Fix that by taking a reference before binding the tree. Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19Merge tag 'wireless-drivers-for-davem-2018-01-17' of ↵David S. Miller3-8/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.15 One last set of fixes for regression submitted during the last few days. bcma & ssb * fix older build problems which (apparently) recently became more frequent in certain MIPS configurations brcmfmac * continue driver initialisation even if CLM blob (firmware) file is not found ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18fm10k: mark PM functions as __maybe_unusedArnd Bergmann1-7/+2
A cleanup of the PM code left an incorrect #ifdef in place, leading to a harmless build warning: drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2502:12: error: 'fm10k_suspend' defined but not used [-Werror=unused-function] drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2475:12: error: 'fm10k_resume' defined but not used [-Werror=unused-function] It's easier to use __maybe_unused attributes here, since you can't pick the wrong one. Fixes: 8249c47c6ba4 ("fm10k: use generic PM hooks instead of legacy PCIe power hooks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-14/+14
Pull two NVMe fixes from Jens Axboe: "Two important fixes for the sgl support for nvme that is new in this release" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-pci: take sglist coalescing in dma_map_sg into account nvme-pci: check segement valid for SGL use
2018-01-18Merge tag 'mmc-v4.15-rc2-3' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "sdhci-esdhc-imx: Fixup clock to make i.MX53 Loco (IMX53QSB) boot again" * tag 'mmc-v4.15-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-esdhc-imx: Fix i.MX53 eSDHCv3 clock
2018-01-18Merge tag 'gpio-v4.15-5' of ↵Linus Torvalds1-14/+16
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "This is the (hopefully) last GPIO fix for v4.15, fixing the bit fiddling in the MMIO GPIO driver. Again the especially endowed screwer-upper who has been open coding bit fiddling is yours truly" * tag 'gpio-v4.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mmio: Also read bits that are zero
2018-01-18Net: ethernet: ti: netcp: Fix inbound ping crash if MTU size is greater than ↵Rex Chang1-1/+1
1500 In the receive queue for 4096 bytes fragments, the page address set in the SW data0 field of the descriptor is not the one we got when doing the reassembly in receive. The page structure was retrieved from the wrong descriptor into SW data0 which is then causing a page fault when UDP checksum is accessing data above 1500. Signed-off-by: Rex Chang <rchang@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18Merge tag 'linux-can-fixes-for-4.15-20180116' of ↵David S. Miller1-10/+11
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-01-16 this is a pull reqeust of a single patch for net/master: This patch by Stephane Grosjean fixes a potential bug in the packet fragmentation in the peak USB driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18nvme-pci: take sglist coalescing in dma_map_sg into accountChristoph Hellwig1-12/+9
Some iommu implementations can merge physically and/or virtually contiguous segments inside sg_map_dma. The NVMe SGL support does not take this into account and will warn because of falling off a loop. Pass the number of mapped segments to nvme_pci_setup_sgls so that the SGL setup can take the number of mapped segments into account. Reported-by: Fangjian (Turing) <f.fangjian@huawei.com> Fixes: a7a7cbe3 ("nvme-pci: add SGL support") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@rimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-18nvme-pci: check segement valid for SGL useKeith Busch1-2/+5
The driver needs to verify there is a payload with a command before seeing if it should use SGLs to map it. Fixes: 955b1b5a00ba ("nvme-pci: move use_sgl initialization to nvme_init_iod()") Reported-by: Paul Menzel <pmenzel+linux-nvme@molgen.mpg.de> Reviewed-by: Paul Menzel <pmenzel+linux-nvme@molgen.mpg.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-17net: fs_enet: do not call phy_stop() in interruptsChristophe Leroy2-3/+14
In case of TX timeout, fs_timeout() calls phy_stop(), which triggers the following BUG_ON() as we are in interrupt. [92708.199889] kernel BUG at drivers/net/phy/mdio_bus.c:482! [92708.204985] Oops: Exception in kernel mode, sig: 5 [#1] [92708.210119] PREEMPT [92708.212107] CMPC885 [92708.214216] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 4.9.61 #39 [92708.223227] task: c60f0a40 task.stack: c6104000 [92708.227697] NIP: c02a84bc LR: c02a947c CTR: c02a93d8 [92708.232614] REGS: c6105c70 TRAP: 0700 Tainted: G W (4.9.61) [92708.241193] MSR: 00021032 <ME,IR,DR,RI>[92708.244818] CR: 24000822 XER: 20000000 [92708.248767] GPR00: c02a947c c6105d20 c60f0a40 c62b4c00 00000005 0000001f c069aad8 0001a688 GPR08: 00000007 00000100 c02a93d8 00000000 000005fc 00000000 c6213240 c06338e4 GPR16: 00000001 c06330d4 c0633094 00000000 c0680000 c6104000 c6104000 00000000 GPR24: 00000200 00000000 ffffffff 00000004 00000078 00009032 00000000 c62b4c00 NIP [c02a84bc] mdiobus_read+0x20/0x74 [92708.281517] LR [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.286547] Call Trace: [92708.288980] [c6105d20] [c6104000] 0xc6104000 (unreliable) [92708.294339] [c6105d40] [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.300098] [c6105d50] [c02a5330] phy_stop+0x60/0x9c [92708.305007] [c6105d60] [c02c84d0] fs_timeout+0xdc/0x110 [92708.310197] [c6105d80] [c035cd48] dev_watchdog+0x268/0x2a0 [92708.315593] [c6105db0] [c0060288] call_timer_fn+0x34/0x17c [92708.321014] [c6105dd0] [c00605f0] run_timer_softirq+0x21c/0x2e4 [92708.326887] [c6105e50] [c001e19c] __do_softirq+0xf4/0x2f4 [92708.332207] [c6105eb0] [c001e3c8] run_ksoftirqd+0x2c/0x40 [92708.337560] [c6105ec0] [c003b420] smpboot_thread_fn+0x1f0/0x258 [92708.343405] [c6105ef0] [c003745c] kthread+0xbc/0xd0 [92708.348217] [c6105f40] [c000c400] ret_from_kernel_thread+0x5c/0x64 [92708.354275] Instruction dump: [92708.357207] 7c0803a6 bbc10018 38210020 4e800020 7c0802a6 9421ffe0 54290024 bfc10018 [92708.364865] 90010024 7c7f1b78 81290008 552902ee <0f090000> 3bc3002c 7fc3f378 90810008 [92708.372711] ---[ end trace 42b05441616fafd7 ]--- This patch moves fs_timeout() actions into an async worker. Fixes: commit 48257c4f168e5 ("Add fs_enet ethernet network driver, for several embedded platforms") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17r8152: disable RX aggregation on Dell TB16 dockKai-Heng Feng1-0/+13
r8153 on Dell TB15/16 dock corrupts rx packets. This change is suggested by Realtek. They guess that the XHCI controller doesn't have enough buffer, and their guesswork is correct, once the RX aggregation gets disabled, the issue is gone. ASMedia is currently working on a real sulotion for this issue. Dell and ODM confirm the bcdDevice and iSerialNumber is unique for TB16. Note that TB15 has different bcdDevice and iSerialNumber, which are not unique values. If you still have TB15, please contact Dell to replace it with TB16. BugLink: https://bugs.launchpad.net/bugs/1729674 Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17tun: fix a memory leak for tfile->tx_arrayCong Wang1-2/+13
tfile->tun could be detached before we close the tun fd, via tun_detach_all(), so it should not be used to check for tfile->tx_array. As Jason suggested, we probably have to clean it up unconditionally both in __tun_deatch() and tun_detach_all(), but this requires to check if it is initialized or not. Currently skb_array_cleanup() doesn't have such a check, so I check it in the caller and introduce a helper function, it is a bit ugly but we can always improve it in net-next. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds3-6/+6
Pull rdma fixes from Doug Ledford: "We had a few more items creep up over the last week. Given we are in -rc8, these are obviously limited to bugs that have a big downside and for which we are certain of the fix. The first is a straight up oops bug that all you have to do is read the code to see it's a guaranteed 100% oops bug. The second is a use-after-free issue. We get away lucky if the queue we are shutting down is empty, but if it isn't, we can end up oopsing. We really need to drain the queue before destroying it. The final one is an issue with bad user input causing us to access our port array out of bounds. While fixing the array out of bounds issue, it was noticed that the original code did the same thing twice (the call to rdma_ah_set_port_num()), so its removal is not balanced by a readd elsewhere, it was already where it needed to be in addition to where it didn't need to be. Summary: - Oops fix in hfi1 driver - use-after-free issue in iser-target - use of user supplied array index without proper checking" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix out-of-bound access while querying AH IB/hfi1: Prevent a NULL dereference iser-target: Fix possible use-after-free in connection establishment error
2018-01-17gpio: mmio: Also read bits that are zeroLinus Walleij1-14/+16
The code for .get_multiple() has bugs: 1. The simple .get_multiple() just reads a register, masks it and sets the return value. This is not correct: we only want to assign values (whether 0 or 1) to the bits that are set in the mask. Fix this by using &= ~mask to clear all bits in the mask and then |= val & mask to set the corresponding bits from the read. 2. The bgpio_get_multiple_be() call has a similar problem: it uses the |= operator to set the bits, so only the bits in the mask are affected, but it misses to clear all returned bits from the mask initially, so some bits will be returned erroneously set to 1. 3. The bgpio_get_set_multiple() again fails to clear the bits from the mask. 4. find_next_bit() wasn't handled correctly, use a totally different approach for one function and change the other function to follow the design pattern of assigning the first bit to -1, then use bit + 1 in the for loop and < num_iterations as break condition. Fixes: 80057cb417b2 ("gpio-mmio: Use the new .get_multiple() callback") Cc: Bartosz Golaszewski <brgl@bgdev.pl> Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds20-81/+153
Pull networking fixes from David Miller: 1) Two read past end of buffer fixes in AF_KEY, from Eric Biggers. 2) Memory leak in key_notify_policy(), from Steffen Klassert. 3) Fix overflow with bpf arrays, from Daniel Borkmann. 4) Fix RDMA regression with mlx5 due to mlx5 no longer using pci_irq_get_affinity(), from Saeed Mahameed. 5) Missing RCU read locking in nl80211_send_iface() when it calls ieee80211_bss_get_ie(), from Dominik Brodowski. 6) cfg80211 should check dev_set_name()'s return value, from Johannes Berg. 7) Missing module license tag in 9p protocol, from Stephen Hemminger. 8) Fix crash due to too small MTU in udp ipv6 sendmsg, from Mike Maloney. 9) Fix endless loop in netlink extack code, from David Ahern. 10) TLS socket layer sets inverted error codes, resulting in an endless loop. From Robert Hering. 11) Revert openvswitch erspan tunnel support, it's mis-designed and we need to kill it before it goes into a real release. From William Tu. 12) Fix lan78xx failures in full speed USB mode, from Yuiko Oshino. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) net, sched: fix panic when updating miniq {b,q}stats qed: Fix potential use-after-free in qed_spq_post() nfp: use the correct index for link speed table lan78xx: Fix failure in USB Full Speed sctp: do not allow the v4 socket to bind a v4mapped v6 address sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf sctp: reinit stream if stream outcnt has been change by sinit in sendmsg ibmvnic: Fix pending MAC address changes netlink: extack: avoid parenthesized string constant warning ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY net: Allow neigh contructor functions ability to modify the primary_key sh_eth: fix dumping ARSTR Revert "openvswitch: Add erspan tunnel support." net/tls: Fix inverted error codes to avoid endless loop ipv6: ip6_make_skb() needs to clear cork.base.dst sctp: avoid compiler warning on implicit fallthru net: ipv4: Make "ip route get" match iif lo rules again. netlink: extack needs to be reset each time through loop tipc: fix a memory leak in tipc_nl_node_get_link() ipv6: fix udpv6 sendmsg crash caused by too small MTU ...
2018-01-16qed: Fix potential use-after-free in qed_spq_post()Roland Dreier1-1/+7
We need to check if p_ent->comp_mode is QED_SPQ_MODE_EBLOCK before calling qed_spq_add_entry(). The test is fine is the mode is EBLOCK, but if it isn't then qed_spq_add_entry() might kfree(p_ent). Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16nfp: use the correct index for link speed tableJakub Kicinski1-1/+1
sts variable is holding link speed as well as state. We should be using ls to index into ls_to_ethtool. Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16lan78xx: Fix failure in USB Full SpeedYuiko Oshino1-0/+1
Fix initialize the uninitialized tx_qlen to an appropriate value when USB Full Speed is used. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16Merge tag 'mac80211-for-davem-2018-01-15' of ↵David S. Miller1-2/+15
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== More fixes: * hwsim: - properly flush deletion works at module unload - validate # of channels passed from userspace * cfg80211: - fix RCU locking regression - initialize on-stack channel data for nl80211 event - check dev_set_name() return value ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16brcmfmac: fix CLM load error for legacy chips when user helper is enabledWright Feng1-6/+3
For legacy chips without CLM blob files, kernel with user helper function returns -EAGAIN when we request_firmware(), and then driver got failed when bringing up legacy chips. We expect the CLM blob file for legacy chip is not existence in firmware path, but the -ENOENT error is transferred to -EAGAIN in firmware_class.c with user helper. Because of that, we continue with CLM data currently present in firmware if getting error from doing request_firmware(). Cc: stable@vger.kernel.org # v4.15.y Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-16ssb: Disable PCI host for PCI_DRIVERS_GENERICJames Hogan1-1/+1
Since commit d41e6858ba58 ("MIPS: Kconfig: Set default MIPS system type as generic") changed the default MIPS platform to the "generic" platform, which uses PCI_DRIVERS_GENERIC instead of PCI_DRIVERS_LEGACY, various files in drivers/ssb/ have failed to build. This is particularly due to the existence of struct pci_controller being dependent on PCI_DRIVERS_LEGACY since commit c5611df96804 ("MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY"), so add that dependency to Kconfig to prevent these files being built for the "generic" platform including all{yes,mod}config builds. Fixes: c5611df96804 ("MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY") Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Michael Buesch <m@bues.ch> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-wireless@vger.kernel.org Cc: linux-mips@linux-mips.org Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-16bcma: Fix 'allmodconfig' and BCMA builds on MIPS targetsGuenter Roeck1-1/+1
Mips builds with BCMA host mode enabled fail in mainline and -next with: In file included from include/linux/bcma/bcma.h:10:0, from drivers/bcma/bcma_private.h:9, from drivers/bcma/main.c:8: include/linux/bcma/bcma_driver_pci.h:218:24: error: field 'pci_controller' has incomplete type Bisect points to commit d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as generic") as the culprit. Analysis shows that the commmit changes PCI configuration and enables PCI_DRIVERS_GENERIC. This in turn disables PCI_DRIVERS_LEGACY. 'struct pci_controller' is, however, only defined if PCI_DRIVERS_LEGACY is enabled. Ultimately that means that BCMA_DRIVER_PCI_HOSTMODE depends on PCI_DRIVERS_LEGACY. Add the missing dependency. Fixes: d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as ...") Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: James Hogan <jhogan@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: James Hogan <jhogan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-16ibmvnic: Fix pending MAC address changesThomas Falcon1-6/+7
Due to architecture limitations, the IBM VNIC client driver is unable to perform MAC address changes unless the device has "logged in" to its backing device. Currently, pending MAC changes are handled before login, resulting in an error and failure to change the MAC address. Moving that chunk to the end of the ibmvnic_login function, when we are sure that it was successful, fixes that. The MAC address can be changed when the device is up or down, so only check if the device is in a "PROBED" state before setting the MAC address. Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16can: peak: fix potential bug in packet fragmentationStephane Grosjean1-10/+11
In some rare conditions when running one PEAK USB-FD interface over a non high-speed USB controller, one useless USB fragment might be sent. This patch fixes the way a USB command is fragmented when its length is greater than 64 bytes and when the underlying USB controller is not a high-speed one. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-01-16RDMA/mlx5: Fix out-of-bound access while querying AHLeon Romanovsky1-4/+3
The rdma_ah_find_type() accesses the port array based on an index controlled by userspace. The existing bounds check is after the first use of the index, so userspace can generate an out of bounds access, as shown by the KASN report below. ================================================================== BUG: KASAN: slab-out-of-bounds in to_rdma_ah_attr+0xa8/0x3b0 Read of size 4 at addr ffff880019ae2268 by task ibv_rc_pingpong/409 CPU: 0 PID: 409 Comm: ibv_rc_pingpong Not tainted 4.15.0-rc2-00031-gb60a3faf5b83-dirty #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xe9/0x18f print_address_description+0xa2/0x350 kasan_report+0x3a5/0x400 to_rdma_ah_attr+0xa8/0x3b0 mlx5_ib_query_qp+0xd35/0x1330 ib_query_qp+0x8a/0xb0 ib_uverbs_query_qp+0x237/0x7f0 ib_uverbs_write+0x617/0xd80 __vfs_write+0xf7/0x500 vfs_write+0x149/0x310 SyS_write+0xca/0x190 entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x7fe9c7a275a0 RSP: 002b:00007ffee5498738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fe9c7ce4b00 RCX: 00007fe9c7a275a0 RDX: 0000000000000018 RSI: 00007ffee5498800 RDI: 0000000000000003 RBP: 000055d0c8d3f010 R08: 00007ffee5498800 R09: 0000000000000018 R10: 00000000000000ba R11: 0000000000000246 R12: 0000000000008000 R13: 0000000000004fb0 R14: 000055d0c8d3f050 R15: 00007ffee5498560 Allocated by task 1: __kmalloc+0x3f9/0x430 alloc_mad_private+0x25/0x50 ib_mad_post_receive_mads+0x204/0xa60 ib_mad_init_device+0xa59/0x1020 ib_register_device+0x83a/0xbc0 mlx5_ib_add+0x50e/0x5c0 mlx5_add_device+0x142/0x410 mlx5_register_interface+0x18f/0x210 mlx5_ib_init+0x56/0x63 do_one_initcall+0x15b/0x270 kernel_init_freeable+0x2d8/0x3d0 kernel_init+0x14/0x190 ret_from_fork+0x24/0x30 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff880019ae2000 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 104 bytes to the right of 512-byte region [ffff880019ae2000, ffff880019ae2200) The buggy address belongs to the page: page:000000005d674e18 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88001a402000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880019ae2100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2180: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc >ffff880019ae2200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880019ae2280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Disabling lock debugging due to kernel taint Cc: <stable@vger.kernel.org> Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-15sh_eth: fix dumping ARSTRSergei Shtylyov1-1/+1
ARSTR is always located at the start of the TSU register region, thus using add_reg() instead of add_tsu_reg() in __sh_eth_get_regs() to dump it causes EDMR or EDSR (depending on the register layout) to be dumped instead of ARSTR. Use the correct condition/macro there... Fixes: 6b4b4fead342 ("sh_eth: Implement ethtool register dump operations") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: cs89x0: add MODULE_LICENSEArnd Bergmann1-0/+4
This driver lacks a MODULE_LICENSE tag, leading to a Kbuild warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/cirrus/cs89x0.o This adds license, author, and description according to the comment block at the start of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15ppp: unlock all_ppp_mutex before registering deviceGuillaume Nault1-2/+3
ppp_dev_uninit(), which is the .ndo_uninit() handler of PPP devices, needs to lock pn->all_ppp_mutex. Therefore we mustn't call register_netdevice() with pn->all_ppp_mutex already locked, or we'd deadlock in case register_netdevice() fails and calls .ndo_uninit(). Fortunately, we can unlock pn->all_ppp_mutex before calling register_netdevice(). This lock protects pn->units_idr, which isn't used in the device registration process. However, keeping pn->all_ppp_mutex locked during device registration did ensure that no device in transient state would be published in pn->units_idr. In practice, unlocking it before calling register_netdevice() doesn't change this property: ppp_unit_register() is called with 'ppp_mutex' locked and all searches done in pn->units_idr hold this lock too. Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Reported-and-tested-by: syzbot+367889b9c9e279219175@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15mmc: sdhci-esdhc-imx: Fix i.MX53 eSDHCv3 clockBenoît Thébaudeau1-0/+14
Commit 5143c953a786 ("mmc: sdhci-esdhc-imx: Allow all supported prescaler values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode, thus bypassing the SD clock frequency prescaler, in order to be able to get higher SD clock frequencies in some contexts. However, that commit missed the fact that this value is illegal on the eSDHCv3 instance of the i.MX53. This seems to be the only exception on i.MX, this value being legal even for the eSDHCv2 instances of the i.MX53. Fix this issue by changing the minimum prescaler value if the i.MX53 eSDHCv3 is detected. According to the i.MX53 reference manual, if DLLCTRL[10] can be set, then the controller is eSDHCv3, else it is eSDHCv2. This commit fixes the following issue, which was preventing the i.MX53 Loco (IMX53QSB) board from booting Linux 4.15.0-rc5: [ 1.882668] mmcblk1: error -84 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc00 [ 2.002255] mmcblk1: error -84 transferring data, sector 2050, nr 6, cmd response 0x900, card status 0xc00 [ 12.645056] mmc1: Timeout waiting for hardware interrupt. [ 12.650473] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 12.656921] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001201 [ 12.663366] mmc1: sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000000 [ 12.669813] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 12.676258] mmc1: sdhci: Present: 0x01f8028f | Host ctl: 0x00000013 [ 12.682703] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000000 [ 12.689148] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000003f [ 12.695594] mmc1: sdhci: Timeout: 0x0000008e | Int stat: 0x00000000 [ 12.702039] mmc1: sdhci: Int enab: 0x107f004b | Sig enab: 0x107f004b [ 12.708485] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00001201 [ 12.714930] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x08100810 [ 12.721375] mmc1: sdhci: Cmd: 0x0000163a | Max curr: 0x00000000 [ 12.727821] mmc1: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x00000000 [ 12.734265] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 12.740709] mmc1: sdhci: Host ctl2: 0x00000000 [ 12.745157] mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xc8049200 [ 12.751601] mmc1: sdhci: ============================================ [ 12.758110] print_req_error: I/O error, dev mmcblk1, sector 2050 [ 12.764135] Buffer I/O error on dev mmcblk1p1, logical block 0, lost sync page write [ 12.775163] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null) [ 12.782746] VFS: Mounted root (ext4 filesystem) on device 179:9. [ 12.789151] mmcblk1: response CRC error sending SET_BLOCK_COUNT command, card status 0x900 Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Reported-by: Wladimir J. van der Laan <laanwj@gmail.com> Tested-by: Wladimir J. van der Laan <laanwj@gmail.com> Fixes: 5143c953a786 ("mmc: sdhci-esdhc-imx: Allow all supported prescaler values") Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-15mac80211_hwsim: validate number of different channelsJohannes Berg1-0/+5
When creating a new radio on the fly, hwsim allows this to be done with an arbitrary number of channels, but cfg80211 only supports a limited number of simultaneous channels, leading to a warning. Fix this by validating the number - this requires moving the define for the maximum out to a visible header file. Reported-by: syzbot+8dd9051ff19940290931@syzkaller.appspotmail.com Fixes: b59ec8dd4394 ("mac80211_hwsim: fix number of channels in interface combinations") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-01-15mac80211_hwsim: add workqueue to wait for deferred radio deletion on mod unloadBenjamin Beichler1-2/+10
When closing multiple wmediumd instances with many radios and try to unload the mac80211_hwsim module, it may happen that the work items live longer than the module. To wait especially for this deletion work items, add a work queue, otherwise flush_scheduled_work would be necessary. Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-01-14Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull NVMe fix from Jens Axboe: "Just a single fix for nvme over fabrics that should go into 4.15" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-fabrics: initialize default host->id in nvmf_host_default()
2018-01-14Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds2-0/+51
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "This contains: - a PTI bugfix to avoid setting reserved CR3 bits when PCID is disabled. This seems to cause issues on a virtual machine at least and is incorrect according to the AMD manual. - a PTI bugfix which disables the perf BTS facility if PTI is enabled. The BTS AUX buffer is not globally visible and causes the CPU to fault when the mapping disappears on switching CR3 to user space. A full fix which restores BTS on PTI is non trivial and will be worked on. - PTI bugfixes for EFI and trusted boot which make sure that the user space visible page table entries have the NX bit cleared - removal of dead code in the PTI pagetable setup functions - add PTI documentation - add a selftest for vsyscall to verify that the kernel actually implements what it advertises. - a sysfs interface to expose vulnerability and mitigation information so there is a coherent way for users to retrieve the status. - the initial spectre_v2 mitigations, aka retpoline: + The necessary ASM thunk and compiler support + The ASM variants of retpoline and the conversion of affected ASM code + Make LFENCE serializing on AMD so it can be used as speculation trap + The RSB fill after vmexit - initial objtool support for retpoline As I said in the status mail this is the most of the set of patches which should go into 4.15 except two straight forward patches still on hold: - the retpoline add on of LFENCE which waits for ACKs - the RSB fill after context switch Both should be ready to go early next week and with that we'll have covered the major holes of spectre_v2 and go back to normality" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86,perf: Disable intel_bts when PTI security/Kconfig: Correct the Documentation reference for PTI x86/pti: Fix !PCID and sanitize defines selftests/x86: Add test_vsyscall x86/retpoline: Fill return stack buffer on vmexit x86/retpoline/irq32: Convert assembler indirect jumps x86/retpoline/checksum32: Convert assembler indirect jumps x86/retpoline/xen: Convert Xen hypercall indirect jumps x86/retpoline/hyperv: Convert assembler indirect jumps x86/retpoline/ftrace: Convert ftrace assembler indirect jumps x86/retpoline/entry: Convert entry assembler indirect jumps x86/retpoline/crypto: Convert crypto assembler indirect jumps x86/spectre: Add boot time option to select Spectre v2 mitigation x86/retpoline: Add initial retpoline support objtool: Allow alternatives to be ignored objtool: Detect jumps to retpoline thunks x86/pti: Make unpoison of pgd for trusted boot work for real x86/alternatives: Fix optimize_nops() checking sysfs/cpu: Fix typos in vulnerability documentation x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC ...
2018-01-14Merge tag 'usb-4.15-rc8' of ↵Linus Torvalds8-32/+62
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes and device ids for 4.15-rc8 Nothing major, small fixes for various devices, some resolutions for bugs found by fuzzers, and the usual handful of new device ids. All of these have been in linux-next with no reported issues" * tag 'usb-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Documentation: usb: fix typo in UVC gadgetfs config command usb: misc: usb3503: make sure reset is low for at least 100us uas: ignore UAS for Norelsys NS1068(X) chips USB: UDC core: fix double-free in usb_add_gadget_udc_release USB: fix usbmon BUG trigger usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer buffer usbip: remove kernel addresses from usb device and urb debug msgs usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input USB: serial: cp210x: add new device ID ELV ALC 8xxx USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
2018-01-14Merge tag 'staging-4.15-rc8' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single android ashmem bugfix that resolves a reported issue in that interface. It's been in linux-next this week with no reported issues" * tag 'staging-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl
2018-01-14Merge tag 'char-misc-4.15-rc8' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are two bugfixes for some driver bugs for 4.15-rc8 The first is a bluetooth security bug that has been ignored by the Bluetooth developers for months for no obvious reason at all, so I've taken it through my tree. The second is a simple double-free bug in the mux subsystem. Both have been in linux-next for a while with no reported issues" * tag 'char-misc-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mux: core: fix double get_device() Bluetooth: Prevent stack info leak from the EFS element.
2018-01-12Merge tag 'for-linus-4.15-rc8-tag' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two build fixes for clang and two fixes for rather unlikely situations in the Xen gntdev driver" * tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: Fix partial gntdev_mmap() cleanup xen/gntdev: Fix off-by-one error when unmapping with holes x86: xen: remove the use of VLAIS x86/xen/time: fix section mismatch for xen_init_time_ops()
2018-01-12Merge branch 'nvme-4.15' of git://git.infradead.org/nvme into for-linusJens Axboe1-0/+1
Pull a single NVMe fix from Christoph for 4.15.
2018-01-12Merge tag 'mmc-v4.15-rc2-2' of ↵Linus Torvalds2-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - s3mci: mark debug_regs[] as static - renesas_sdhi: Add MODULE_LICENSE * tag 'mmc-v4.15-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: s3mci: mark debug_regs[] as static mmc: renesas_sdhi: Add MODULE_LICENSE
2018-01-12Merge tag 'drm-fixes-for-v4.15-rc8' of ↵Linus Torvalds14-43/+39
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: - Nouveau: regression fix - Tegra: regression fix - vmwgfx: crasher + freed data leak - i915: KASAN use after free fix, whitelist register to avoid hang fix, GVT fixes - vc4: irq/pm fix * tag 'drm-fixes-for-v4.15-rc8' of git://people.freedesktop.org/~airlied/linux: drm/i915: Don't adjust priority on an already signaled fence drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake. drm/vmwgfx: Potential off by one in vmw_view_add() drm/tegra: sor: Fix hang on Tegra124 eDP drm/vmwgfx: Don't cache framebuffer maps drm/nouveau/disp/gf119: add missing drive vfunc ptr drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser drm/i915/gvt: Clear the shadow page table entry after post-sync drm/vc4: Move IRQ enable to PM path
2018-01-12Merge tag 'mlx5-fixes-2018-01-11' of ↵David S. Miller12-68/+114
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-01-11 The following series includes fixes to mlx5 core and netdev driver. To highlight we have two critical fixes in this series: 1st patch from Eran to address a fix for Host2BMC Breakage. 2nd patch from Saeed to address the RDMA IRQ vector affinity settings query issue, the patch provides the correct mlx5_core implementation for RDMA to correctly query vector affinity. I sent this patch privately to Sagi a week a go, so he could to test it but I didn't hear from him. All other patches are trivial misc fixes. Please pull and let me know if there's any problem. for -stable v4.14-y and later: ("net/mlx5: Fix get vector affinity helper function") ("{net,ib}/mlx5: Don't disable local loopback multicast traffic when needed") Note: Merging this series with net-next will produce the following conflict: <<<<<<< HEAD u8 disable_local_lb[0x1]; u8 reserved_at_3e2[0x1]; u8 log_min_hairpin_wq_data_sz[0x5]; u8 reserved_at_3e8[0x3]; ======= u8 disable_local_lb_uc[0x1]; u8 disable_local_lb_mc[0x1]; u8 reserved_at_3e3[0x8]; >>>>>>> 359c96447ac2297fabe15ef30b60f3b4b71e7fd0 To resolve, use the following hunk: i.e: <<<<<< u8 disable_local_lb_uc[0x1]; u8 disable_local_lb_mc[0x1]; u8 log_min_hairpin_wq_data_sz[0x5]; u8 reserved_at_3e8[0x3]; >>>>>> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12Merge tag 'drm-intel-fixes-2018-01-11-1' of ↵Dave Airlie6-4/+17
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Hopefully final drm/i915 fixes for v4.15: - Fix a KASAN reported use after free - Whitelist a register to avoid hangs - GVT fixes * tag 'drm-intel-fixes-2018-01-11-1' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Don't adjust priority on an already signaled fence drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake. drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser drm/i915/gvt: Clear the shadow page table entry after post-sync
2018-01-12Merge branch 'vmwgfx-fixes-4.15' of ↵Dave Airlie4-36/+15
git://people.freedesktop.org/~thomash/linux into drm-fixes Two important fixes for vmwgfx. The off-by-one fix could cause a malicious user to potentially crash the kernel. The framebuffer map cache fix can under some circumstances enable a user to read from or write to freed pages. * 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Potential off by one in vmw_view_add() drm/vmwgfx: Don't cache framebuffer maps
2018-01-12Merge tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds1-6/+12
Pull ceph fixes from Ilya Dryomov: "Two rbd fixes for 4.12 and 4.2 issues respectively, marked for stable" * tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client: rbd: set max_segments to USHRT_MAX rbd: reacquire lock should update lock owner client id
2018-01-12Merge tag 'gpio-v4.15-4' of ↵Linus Torvalds1-12/+23
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly" * tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
2018-01-12net/mlx5e: Remove timestamp set from netdevice open flowFeras Daoud4-4/+8
To avoid configuration override, timestamp set call will be moved from the netdevice open flow to the init flow. By this, a close-open procedure will not override the timestamp configuration. In addition, the change will rename mlx5e_timestamp_set function to be mlx5e_timestamp_init. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-27 22:15:57 +0300