summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-01-17bnx2x: fix GRO parametersYuval Mintz1-24/+23
bnx2x does an internal GRO pass but doesn't provide gso_segs, thus breaking qdisc_pkt_len_init() in case ingress qdisc is used. We store gso_segs in NAPI_GRO_CB(skb)->count, where tcp_gro_complete() expects to find the number of aggregated segments. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17cxgb3: Fix Tx csum statsVipul Pandya1-1/+1
Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17r8169: remove unneeded dirty_rx indexTimo Teräs1-9/+4
After commit 6f0333b ("r8169: use 50% less ram for RX ring") the rx ring buffers are always copied making dirty_rx useless. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: better RSS supportStephen Hemminger1-0/+7
The VMXNET3 device provides RSS hash value for received packets, but it is not being used. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: use static RSS keyStephen Hemminger1-1/+10
Rather than generating a different RSS key on each boot, just use a predetermined value that will map same flow to same value on every device for more predictable testing. This is already done on most hardware drivers. Initial key value just some arbitrary bits extracted once from /dev/random. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: remove unused irq_share_modeStephen Hemminger1-4/+3
This static variable is never set, it initializes to 0 which is VMXNET3_INTR_BUDDYSHARE, and never changes. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: remove device counterStephen Hemminger2-6/+0
An atomic counter of devices present is maintained but never used. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: remove VMXNET3_MAX_DEVICESStephen Hemminger1-1/+0
Defined but never used. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: use netdev_ printk wrappersStephen Hemminger2-76/+73
Use the standard netdev_xxx() and dev_xxx() wrappers to format log messages. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: use netdev_dbgStephen Hemminger1-9/+9
Use netdev_dbg() rather than dev_dbg() because the former prints the device name which is more useful than the pci name. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: fix messages printed before registrationStephen Hemminger1-12/+9
This messages that occur during boot time from this device when netdev_err is called before calling register_netdevice(). Switch to using dev_XXX macros which correlate message with PCI info which is available. Rather than fixing the features message, just remove it since the information is redundant and available through ethtool. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: remove unnecessary bookkeepingStephen Hemminger2-9/+2
The uncommitted[] array was set but never used except in a debug message. Remove it. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: use netdev_alloc_skb_ip_alignStephen Hemminger1-7/+5
Use netdev_alloc_skb_align, rather than open code using dev_alloc_skb. Change allocation at startup to use GFP_KERNEL. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16e1000e: merge multiple conditional statements into oneBruce Allan1-6/+5
Cleanup a set of conditional tests. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: cleanup code duplicationBruce Allan1-5/+1
The removed code block is duplicated in e1000e_write_itr() so use that instead. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: cleanup magic numberBruce Allan1-2/+2
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: cleanup unnecessary line wrapBruce Allan1-2/+1
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: cleanup unusual comment placementBruce Allan1-1/+1
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: cleanup redundant statistics counterBruce Allan1-1/+0
rx_long_byte_count can be removed since it is duplicated in rx_bytes Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: resolve checkpatch PREFER_PR_LEVEL warningBruce Allan1-5/+3
WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... v2 - remove unnecessary "e1000e:" prefix as pointed out by Joe Perches since that produces a redundant "e1000e:" in the log message Cc: Joe Perches <joe@perches.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: add missing bailout on errorBruce Allan1-0/+2
...discovered during code inspection. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: unexpected "Reset adapter" message when cable pulledBruce Allan2-20/+21
When there is heavy traffic and the cable is pulled, the driver must reset the adapter to flush the Tx queue in hardware. This causes the reset path to be scheduled and logs the message "Reset adapter" which could be mis- interpreted as an error by the user. Change how the reset path is invoked for this scenario by using the same method done in an existing work-around for 80003es2lan (i.e. set a flag and if the flag is set in the reset code do not log the "Reset adapter" message since the reset is expected). Re-name the FLAG_RX_RESTART_NOW to FLAG_RESTART_NOW since it is used for resets in both the Rx and Tx specific code. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: fix enabling of EEE on 82579 and I217Bruce Allan1-29/+65
Energy Efficient Ethernet on 82579 and I217 should only be enabled if not disabled by the user, if the link is full duplex and the link partner has similar EEE capabilities (stored in different EMI registers on the two different parts). After enabling EEE, read the IEEE MMD register 3.1 (which is also stored in different EMI registers on the two different parts) to clear the count of received Tx/Rx LPI indications. Also, rename I217_EEE_100_SUPPORTED to I82579_EEE_100_SUPPORTED to indicate the bit is valid starting with I82579 (released before I217). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: 82577: workaround for link drop issueBruce Allan1-1/+7
When connected to certain switches, the 82577 PHY might drop link unexpectedly. Work around the issue by setting the Mean Square Error higher than the hardware default. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: helper functions for accessing EMI registersBruce Allan1-19/+65
The Extended Management Interface (EMI) registers are accessed by first writing the EMI register offset to the EMI_ADDR regiter and then either reading or writing the data to/from the EMI_DATA register. Add helper functions for performing these steps and convert existing EMI register accesses accordingly. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: Invalid Image CSUM bit changed for I217Bruce Allan2-8/+25
On I217, the bit that indicates an invalid EEPROM (NVM) image checksum has changed from previous ICH/PCH LOMs. When validating the EEPROM checksum, check the appropriate bit on different devices. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: Acquire/release semaphore when writing each EEPROM pageBruce Allan1-11/+11
When data blocks are written to the EEPROM, the HW/SW/FW semaphore must be held for the duration. With large data blocks on 80003es2lan, 82571 and 82572, this can take too long and cause the firmware to take ownership of the semaphore and consequently ownership of writes to the EEPROM. Instead, acquire and release the semaphore for each page of the block written. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16e1000e: SerDes autoneg flow controlBruce Allan3-3/+132
Enables flow control to be set in SerDes autoneg mode. This is what is done for copper, but relies on a different set of register/bit checks since this is all done within the Mac registers. Remove inapplicable comment in defines.h Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16bnx2x: Introduce 2013 and advance version to 1.78.02Yuval Mintz24-26/+26
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16bnx2x: Added FW GRO bridging supportYuval Mintz1-2/+52
Since submit 621b4d6 the bnx2x driver support FW GRO. However, when using the device with GRO enabled in bridging scenarios throughput is very low, as the bridge expects all incoming packets to be passed with CHECKSUM_PARTIAL - a demand which is satisfied by the SW GRO implementation, but was missed in the bnx2x driver implementation (which returned CHECKSUM_UNNECESSARY). Now, given that the traffic is supported by FW GRO (TCP/IP), the bnx2x driver calculates the pseudo checksum by itself, passing skbs with CHECKSUM_PARTIAL and giving a much better throughput when receiving GRO traffic. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16bnx2x: Clean previous IGU status before ackYuval Mintz2-7/+11
When enabling interrupts, acknowledge the interrupt only after configuring the IGU to the correct interrupt mode (otherwise it would dirty selftests) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16bnx2x: improve stop-on-errorYuval Mintz5-76/+79
Get better control over interrupts during panic, and allow FW to test outgoing Tx packets when stop-on-error is allowed. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16bnx2x: add `ethtool -w' support.Miriam Shitrit4-1176/+2494
This revises and enhances the bnx2x register dump facilities, adding support for `ethtool -w' on top of `ethtool -d'. Signed-off-by: Miriam Shitrit <miris@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16bnx2x: Added nvram personalities supportYuval Mintz2-0/+11
When a device is configured to act as either iscsi or fcoe device in its nvram, prevent the other from being misused by preventing its activation in the driver. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16bnx2x: Fix rare self-test failuresYaniv Rosner1-7/+10
On rare occasions, self test link may fail since the link is being sampled while it's still being stabilized. To correct this behaviour, try to sample the link for 2 seconds prior to declaring a failure. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16bnx2x: use SAN Mac for FCoE.Dmitry Kravkov1-1/+1
Current logic causes chips running in switch dependent multi-function FCoE mode not to configure their MAC, leading to an all 0s MAC. This patch configures the interface with the SAN Mac instead. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16bnx2x: Add an additional fatal hw assertion - BRB_HW_INTERRUPTDmitry Kravkov2-0/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16bnx2x: Clear dirty status when booting after UNDIYuval Mintz2-0/+4
Self-tests following boot from SAN have failed as the UNDI driver might leave some NIG interrupt indications. This patch does the clean-up, clearing those indications and allowing the test to pass. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1178-7944/+14802
Conflicts: Documentation/networking/ip-sysctl.txt drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c Both conflicts were simply overlapping context. A build fix for qlcnic is in here too, simply removing the added devinit annotations which no longer exist. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15tg3: Fix crc errors on jumbo frame receiveNithin Nayak Sujir1-23/+35
TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting in intermittent crc errors on jumbo frames with some link partners. Change the code to do a read/modify/write. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15tg3: Avoid null pointer dereference in tg3_interrupt in netconsole modeNithin Nayak Sujir1-0/+4
When netconsole is enabled, logging messages generated during tg3_open can result in a null pointer dereference for the uninitialized tg3 status block. Use the irq_sync flag to disable polling in the early stages. irq_sync is cleared when the driver is enabling interrupts after all initialization is completed. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15drivers/net: delete orphaned MCA ibmlana driver contentPaul Gortmaker2-1353/+0
In commit a5e371f61ad33c07b28e7c9b60c78d71fdd34e2a ("drivers/net: delete all code/drivers depending on CONFIG_MCA") most of the MCA drivers went, including the Kconfig/Makefile hooks for ibmlana, but it seems that I missed the "git rm" on these actual driver files, and with the namespace overlap with machine check architecture, it got missed by various git grep type checking done at that time. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15tun: fix LSM/SELinux labeling of tun/tap devicesPaul Moore1-5/+18
This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15ifb: dont hard code inet_net useEric Dumazet1-1/+1
ifb should lookup devices in the appropriate namespace. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli31-55/+46
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15ipv6 netevent: Remove old_neigh from netevent_redirect.YOSHIFUJI Hideaki / 吉藤英明1-24/+11
The only user is cxgb3 driver. old_neigh is used to check device change, but it must not happen on redirect. In this sense, we can remove old_neigh argument. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14drivers/net: Clean up orphaned probes in Space.cPaul Gortmaker1-31/+0
The removal of the 8390 EISA drivers actually comprises the complete content of the EISA probe block, so we can now remove that block, and its hook into the unified probe. Note that the deleted comment mentions PCI probes, but they long since moved elsewhere, so no PCI probes are touched here. We get rid of the orphaned EISA probe prototypes, and a couple of left over MCA probe prototypes at the same time. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14Merge tag 'staging-3.8-rc3' of ↵Linus Torvalds51-983/+1390
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg Kroah-Hartman: "Here are a number of small fixes to staging drivers for your 3.8-rc3 tree. Well, the omapdrm fixes aren't really "small" but they were waiting on a number of other drm patches to go in through the drm tree, and got delayed by my vacation over the holidays. They are totally self-contained, everyone involved have acked them, and they fix issues that people have been having with the driver. Other than that one, it's a bunch of tiny bugfixes for a number of reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (36 commits) staging: zram: fix invalid memory references during disk write staging: tidspbridge: use prepare/unprepare on dsp clocks staging: tidspbridge: Fix build breakage due to splitting CM functions. staging: comedi: comedi_test: fix race when cancelling command staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC staging: comedi: prevent auto-unconfig of manually configured devices staging: comedi: fix minimum AO period for NI 625x and NI 628x staging: vme_pio2: fix oops on module unloading staging: speakup: avoid out-of-range access in synth_add() staging: speakup: avoid out-of-range access in synth_init() staging: rtl8192e: Fix failure to check pci_map_single() staging: rtl8187se: Fix failure to check pci_map_single() staging: drm/imx: fix double free bug in error path staging: drm/imx: several bug fixes staging: drm/imx: check return value of ipu_reset() staging: drm/omap: fix flags in dma buf exporting staging: drm/omap: use omapdss low level API staging/fwserial: Update TODO file per reviewer comments staging/fwserial: Limit tx/rx to 1394-2008 spec maximum staging/fwserial: Refine Kconfig help text ...
2013-01-14Merge tag 'usb-3.8-rc3' of ↵Linus Torvalds32-89/+257
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of USB fixes for your 3.8-rc3 tree. They all either fix problems that have been reported (like the xhci/hub changes) or add new device ids to existing drivers. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits) usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added usb: host: ohci-tmio: fix compile warning USB: Add device quirk for Microsoft VX700 webcam USB: ehci-fsl: fix regression on mpc5121e usb: chipidea: Allow disabling streaming not only in udc mode USB: fsl-mph-dr-of: fix regression on mpc5121e USB: select USB_ARCH_HAS_EHCI for MXS USB: hub: handle claim of enabled remote wakeup after reset USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i" USB: option: add Nexpring NP10T terminal id USB: option: add Telekom Speedstick LTE II USB: option: blacklist network interface on ZTE MF880 usb: imx21-hcd: Include missing linux/module.h USB: option: Add new MEDIATEK PID support USB: ehci: make debug port in-use detection functional again USB: usbtest: fix test number in log message xhci: Avoid "dead ports", add roothub port polling. USB: Handle warm reset failure on empty port. USB: Ignore port state until reset completes. USB: Increase reset timeout. ...
2013-01-14Merge tag 'char-misc-3.8-rc3' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg Kroah-Hartman: "Here is a single fix for the mei driver that resolves a reported issue. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: fix mismatch in mutex unlock-lock in mei_amthif_read()