summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-05-19ath9k: remove unnecessary codeGustavo A. R. Silva1-1/+1
The array field eeprom_data in struct th9k_platform_data is a fixed size array so it can never be NULL. Addresses-Coverity-ID: 1364903 Cc: Arend Van Spriel <arend.vanspriel@broadcom.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19wil6210: use memdup_userGeliang Tang1-8/+4
Use memdup_user() helper instead of open-coding to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19ath5k: fix memory leak on buf on failed eeprom readColin Ian King1-1/+4
The AR5K_EEPROM_READ macro returns with -EIO if a read error occurs causing a memory leak on the allocated buffer buf. Fix this by explicitly calling ath5k_hw_nvram_read and exiting on the via the freebuf label that performs the necessary free'ing of buf when a read error occurs. Detected by CoverityScan, CID#1248782 ("Resource Leak") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19ath9k: fix spelling in ath9k_tx99_init()Ammly Fredrick1-1/+1
It's spelled hardware, not harware. Signed-off-by: Ammly Fredrick <ammlyf@gmail.com> [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19ath6kl: assure headroom of skbuff is writable in .start_xmit()Arend Van Spriel1-9/+4
An issue was found brcmfmac driver in which a skbuff in .start_xmit() callback was actually cloned. So instead of checking for sufficient headroom it should also be writable. Hence use skb_cow_head() to check and expand the headroom appropriately. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Steve deRosier <derosier@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: append the wmi_op_version to testmode get_version cmdRyan Hsu2-0/+8
QCA9xxx and QCA61x4/QCA93xx are using different wmi operation, in order for userspace to differentiate it, appends the wmi_op_version information alone with the get_version command. Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: fix out of bounds access to local bufferMichael Mera1-6/+10
During write to debugfs file simulate_fw_crash, fixed-size local buffer 'buf' is accessed and modified at index 'count-1', where 'count' is the size of the write (so potentially out of bounds). This patch fixes this problem. Signed-off-by: Michael Mera <dev@michaelmera.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: add initial SDIO supportErik Stromdahl4-0/+2352
Chipsets like QCA6584 have support for SDIO so add initial SDIO bus support to ath10k. With this patch we have the low level HTC protocol working and it's possible to boot the firmware, but it's still not possible to connect or anything like. More changes are needed for full functionality. For that reason we print during initialisation: WARNING: ath10k SDIO support is incomplete, don't expect anything to work! Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> [kvalo@qca.qualcomm.com: refactoring, cleanup, commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: different fw file name for sdioErik Stromdahl1-1/+12
Since both SDIO based chipsets will use different firmware from the PCIe and AHB chipsets, the fw file name must be different depending on bus type. The new firmware names are: For PCIe and AHB: firmware-<api_version>.bin (same as before) For SDIO: firmware-sdio-<api_version>.bin Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: ready_ext msg supportErik Stromdahl2-6/+27
Added support for extended ready message. The extended ready message contains the maximum bundle count supported by SDIO chipsets. It is transmitted by SDIO chipset only and replaces the "standard" ready message in this case. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: sdio get target infoErik Stromdahl3-1/+77
Special BMI get target info function for SDIO. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: add sdio extra initializationsErik Stromdahl1-0/+18
Extra initializations needed by all sdio boards. Derived from qcacld. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: various sdio related definitionsErik Stromdahl4-0/+82
Debug masks for SDIO HIF layer. Address definitions for SDIO/mbox based chipsets. Augmented struct host_interest with more members. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: refactorizationErik Stromdahl1-40/+34
Code refactorization: Moved the code for ep 0 in ath10k_htc_rx_completion_handler to ath10k_htc_control_rx_complete. This eases the implementation of SDIO/mbox significantly since the ep_rx_complete cb is invoked directly from the SDIO/mbox hif layer. Since the ath10k_htc_control_rx_complete already is present (only containing a warning message) there is no reason for not using it (instead of having a special case for ep 0 in ath10k_htc_rx_completion_handler). Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: move htc ctrl ep connect to htc_initErik Stromdahl1-22/+17
This patch moves the HTC ctrl service connect from htc_wait_target to htc_init. This is done in order to make sure the htc ctrl service is setup properly before hif_start is called. The reason for this is that we want the HTC ctrl service callback to be initialized before the target sends the HTC ready message. The ready message will always be transmitted on endpoint 0 (which is always assigned to the HTC control service) so it makes more sense if HTC control has been connected before the ready message is received. Since the service to pipe mapping is done as a part of the service connect, the get_default_pipe call is redundant and was removed. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: rx trailer lookahead supportErik Stromdahl2-5/+120
The RX trailer parsing is now capable of parsing lookahead reports. A lookahead contains the first 4 bytes of the next HTC message (that will be read in the next SDIO read operation). Lookaheads are used by the SDIO/mbox HIF layer to determine if the next message is part of a bundle, which endpoint it belongs to and how long it is. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: made static function publicErik Stromdahl2-6/+14
Changed ath10k_htc_notify_tx_completion and ath10k_htc_process_trailer from static to non static. These functions are needed by SDIO/mbox. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-26brcmfmac: Make skb header writable before useJames Hughes1-14/+5
The driver was making changes to the skb_header without ensuring it was writable (i.e. uncloned). This patch also removes some boiler plate header size checking/adjustment code as that is also handled by the skb_cow_header function used to make header writable. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26brcmfmac: Ensure pointer correctly set if skb data location changesJames Hughes1-1/+3
The incoming skb header may be resized if header space is insufficient, which might change the data adddress in the skb. Ensure that a cached pointer to that data is correctly set by moving assignment to after any possible changes. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26rndis_wlan: add return value validationPan Bian1-0/+4
Function create_singlethread_workqueue() will return a NULL pointer if there is no enough memory, and its return value should be validated before using. However, in function rndis_wlan_bind(), its return value is not checked. This may cause NULL dereference bugs. This patch fixes it. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26libertas: check return value of alloc_workqueuePan Bian1-0/+5
Function alloc_workqueue() will return a NULL pointer if there is no enough memory, and its return value should be validated before using. However, in function if_spi_probe(), its return value is not checked. This may result in a NULL dereference bug. This patch fixes the bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26mt7601u: check return value of alloc_skbPan Bian1-2/+8
Function alloc_skb() will return a NULL pointer if there is no enough memory. However, in function mt7601u_mcu_msg_alloc(), its return value is not validated before it is used. This patch fixes it. Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26orinoco_usb: Fix buffer on stackMaksim Salau1-4/+17
Allocate buffer on HEAP instead of STACK for a local variable that is to be sent using usb_control_msg(). Signed-off-by: Maksim Salau <maksim.salau@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26orinoco: fix spelling mistake: "Registerred" -> "Registered"Colin Ian King1-1/+1
trivial fix to spelling mistake in dbg_dbg message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26rtlwifi: rtl8821ae: setup 8812ae RFE according to device typeLarry Finger2-16/+107
Current channel switch implementation sets 8812ae RFE reg value assuming that device always has type 2. Extend possible RFE types set and write corresponding reg values. Source for new code is http://dlcdnet.asus.com/pub/ASUS/wireless/PCE-AC51/DR_PCE_AC51_20232801152016.zip Signed-off-by: Maxim Samoylov <max7255@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-25drivers: net: xgene-v2: Fix error return code in xge_mdio_config()Wei Yongjun1-0/+1
Fix to return error code -ENODEV from the no PHY found error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: fix invalid use of sizeof in qed_alloc_qm_data()Wei Yongjun1-1/+1
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Fixes: b5a9ee7cf3be ("qed: Revise QM configuration") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: ethernet: ti: netcp_core: remove unused compl queue mappingIvan Khoronzhuk1-4/+0
This code is unused and probably was unintentionally left while moving completion queue mapping in submit function. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed - VF tunnelling support [VXLAN/GENEVE/GRE]Chopra, Manish8-4/+446
This patch adds hardware channel APIs support between VF and PF for tunnelling configuration for the VFs. According to that configuration VFs can run VXLAN/GENEVE/GRE tunnels over it with tunnel features offloaded. Using these APIs VF can also request for UDP ports configuration to the PF, although PF and it's child VFs share the same port. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed/qede: Add UDP ports in bulletin boardChopra, Manish8-1/+83
This patch adds support for UDP ports in bulletin board to notify UDP ports change to the VFs Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qede: Configure UDP ports in local context.Chopra, Manish3-36/+52
This patch configures UDP ports locally instead of configuring them in deferred context which would be helpful in synchronizing UDP ports configuration for VFs which will be enabled in further patches. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qede: Disable tunnel offloads for non offloaded UDP portsChopra, Manish1-6/+17
This patch disables tunnel offloads via ndo_features_check() if given UDP port is not offloaded to hardware. This in turn allows to run multiple tunnel interfaces using different UDP ports. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed/qede: Enable tunnel offloads based on hw configurationChopra, Manish3-11/+46
This patch enables tunnel feature offloads based on hw configuration at initialization time instead of enabling them always. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: refactor tunnelling - API/StructsChopra, Manish7-197/+207
This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25Merge tag 'linux-can-next-for-4.12-20170425' of ↵David S. Miller16-431/+3573
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-04-25 this is a pull request of 21 patches for net-next/master. There are 4 patches by Stephane Grosjean for the PEAK PCAN-PCIe FD CAN-FD boards. The next 7 patches are by Mario Huettel, which add support for M_CAN IP version >= v3.1.x to the m_can driver. A patch by Remigiusz Kołłątaj adds support for the Microchip CAN BUS Analyzer. 8 patches by Oliver Hartkopp complete the initial CAN network namespace support. Wei Yongjun's patch for the ti_hecc driver fixes the return value check in the probe function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25ipvlan: use pernet operations and restrict l3s hooks to master netnsFlorian Westphal2-15/+70
commit 4fbae7d83c98c30efc ("ipvlan: Introduce l3s mode") added registration of netfilter hooks via nf_register_hooks(). This API provides the illusion of 'global' netfilter hooks by placing the hooks in all current and future network namespaces. In case of ipvlan the hook appears to be only needed in the namespace that contains the ipvlan master device (i.e., usually init_net), so placing them in all namespaces is not needed. This switches ipvlan driver to pernet operations, and then only registers hooks in namespaces where a ipvlan master device is set to l3s mode. Extra care has to be taken when the master device is moved to another namespace, as we might have to 'move' the netfilter hooks too. This is done by storing the namespace the ipvlan port was created in. On REGISTER event, do (un)register operations in the old/new namespaces. This will also allow removal of the nf_register_hooks() in a future patch. Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25can: ti_hecc: fix return value check in ti_hecc_probe()Wei Yongjun1-6/+6
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: dabf54dd1c63 ("can: ti_hecc: Convert TI HECC driver to DT only driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: enable module auto loading for virtual CAN interfacesOliver Hartkopp1-2/+5
Autoload the vcan module when a vcan instance is to be created by 'ip link add type vcan' Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: add Virtual CAN Tunnel driver (vxcan)Oliver Hartkopp3-0/+335
Similar to the virtual ethernet driver veth, vxcan implements a local CAN traffic tunnel between two virtual CAN network devices. See Kconfig entry for details. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: mcba_usb: Add support for Microchip CAN BUS AnalyzerRemigiusz Kołłątaj3-0/+911
SocketCAN driver for Microchip CAN BUS Analyzer (http://www.microchip.com/development-tools/) Changes in v4: - possible memory leak fixed in mcba_usb_write_bulk_callback - LED support added - failure handling in mcba_usb_probe improved - C99 initializers for structs on stack Changes in v3: - improved/simplified CAN ID conversion - functions for transmission of skb and cmd separated - fixed/improved netif_stop_queue handling - style/cosmetic corrections Changes in v2: - Termination handling reimplemented to fit new netlink API (IFLA_CAN_TERMINATION) - Bitrate handling reimplemented to fit new netlink API (IFLA_CAN_BITRATE) - CAN ID conversion refactored (changed from macro to inline functions) - CAN DLC handling using get_can_dlc() - Endianness handling for can_speed introduced - Debugging removed - Redundant error prints removed - Style/cosmetic corrections (i.e. macro names, redefs, inits etc.) Signed-off-by: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Enable TX FIFO Handling for M_CAN IP version >= v3.1.xMario Huettel1-29/+159
* Added defines for TX Event FIFO Element * Adapted ndo_start_xmit function. For versions >= v3.1.x it uses the TX FIFO to optimize the data throughput. It stores the echo skb at the same index as in the M_CAN's TX FIFO. The frame's message marker is set to this index. This message marker is received in the TX Event FIFO after the message was successfully transmitted. It is used to echo the correct echo skb back to the network stack. * Added m_can_echo_tx_event function. It reads all received message markers in the TX Event FIFO and loops back the corresponding echo skbs. * ISR checks for new TX Event Entry interrupt for version >= 3.1.x. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Configuration for TX and TX event FIFOsMario Huettel1-5/+34
* TX/TX Event FIFO sizes are configured for version >= v3.1.x Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Enable M_CAN version dependent initializationMario Huettel1-71/+269
This patch adapts the initialization of the M_CAN. So it can be used with all versions >= 3.0.x. Changes: * Added version element to m_can_priv structure to hold M_CAN version. * Renamed bittiming structs for version 3.0.x * Added new bittiming structs for version >= 3.1.x * Function alloc_m_can_dev takes 2 new arguments. The TX FIFO size and the base address of the module. * Chip configuration for CAN_CTRLMODE_LOOPBACK is changed: Enabled CCCR_MON bit. In combination with TEST_LBCK it activates the internal loopback mode. Leaving CCCR_MON '0' results in external loopback mode. * Clocks are temporarily enabled by platform_propbe function in order to allow read access to the Core Release register and the Control Register. Registers are used to detect M_CAN version and optional Non-ISO Feature. Initialization of M_CAN for version >= 3.1.x: * TX FIFO of M_CAN is used to transmit frames. The driver does not need to stop the tx queue after each frame sent. * Initialization of TX Event FIFO is added. * NON-ISO is fixed for all M_CAN versions < 3.2.x. Version 3.2.x _can_ have the NISO (Non-ISO) bit which can switch the mode of the M_CAN to Non-ISO mode. This bit does not have to be writeable. Therefore it is checked. If it is writable Non-ISO support is added to the controllers supported CAN modes. New Functions: * Function to check the Core Release version. The read value determines the behaviour of the driver. * Function to check if the NISO bit for version >= 3.2.x is implemented. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Updated register defines to newest versionMario Huettel1-65/+125
* Updated register defines to newest M_CAN version (v3.2.1). * Changed defines in the whole code. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Removed virtual address from printMario Huettel1-2/+2
The virtual address of the device was printed. I removed it because it leaks internal information. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Removed initialization of FIFO water marksMario Huettel1-2/+2
FIFO water marks disabled because the driver doesn't handle water mark events. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Disabled Interrupt Line 1Mario Huettel1-1/+2
* Disabled interrupt line 1. The driver didn't use it. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boardsStephane Grosjean7-0/+1718
This patch adds the support of the PCAN-PCI Express FD boards made by PEAK-System, for computers using the PCI Express slot. The PCAN-PCI Express FD has one or two CAN FD channels, depending on the model. A galvanic isolation of the CAN ports protects the electronics of the card and the respective computer against disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated with ambient temperatures in a range of -40 to +85 °C. Such boards run an extented version of the CAN-FD IP running into USB CAN-FD interfaces from PEAK-System, so this patch adds several new commands and their corresponding data types to the PEAK CAN-FD common definitions header file too. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: move header file to new can common subdirStephane Grosjean2-244/+1
The CAN-FD IP from PEAK-System runs into several kinds of PC CAN-FD interfaces. Up to now, only the USB CAN-FD adapters were supported by the Kernel. In order to prepare the adding of some new non-USB CAN-FD interfaces, this patch moves - and rename - the IP definitions file from its private (usb) sub-directory into a - newly created - CAN specific one. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: fix usage of const qualifier in pointers argsStephane Grosjean1-8/+8
Fixes the usage of the const qualifier in the memory pointer arguments of the declared inline functions. By changing the line containing "const", this patch also changes the name of the arg into a more usual one. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-13 14:09:23 +0300