summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-06-30[SCSI] bnx2i: Modified to skip CNIC registration if iSCSI is not supportedEddie Wai1-14/+15
The init routine will now examine the cnic->max_iscsi_conn variable before registering to CNIC during ulp_init. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bnx2i: Added the use of kthreads to handle SCSI cmd completionEddie Wai4-35/+333
This patch breaks the SCSI cmd completion into two parts: 1. The bh will allocate and queued work to the cmd specific CPU IO completion kthread. The CPU for the cmd is from the sc->request->cpu. 2. The CPU specific IO completion kthread will call the scsi_cmd_resp routine to do the actual cmd completion. In the normal case, these IO completion kthreads should complete before the blk IO times out at 60s. However, in the case when these kthreads are blocked for whatever reason and exceeded the timeout, the call to conn_destroy will have to iterate and exhaust all related work in the percpu work list for all online CPUs. This will guarantee the protection of the work->session and conn pointers before they get freed. Also modified the event coalescing formula to have at least the event_coal_min outstanding cmds in the pipeline so the SCSI producer would not get underrun. Also changed the following SCSI parameters: - can_queue from 1024 to 2048 - cmds_per_lun from 24 to 128 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Benjamin Li <benli@broadcom.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] libiscsi_tcp: fix LLD data allocationMike Christie1-11/+3
Have libiscsi_tcp have upper layers allocate the LLD data along with the iscsi_cls_conn struct, so it is refcounted. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] iscsi_tcp: fix locking around iscsi sk user dataMike Christie1-20/+41
iscsi_sw_tcp_conn_restore_callbacks could have set the sk_user_data field to NULL then iscsi_sw_tcp_data_ready could read that and try to access the NULL pointer. This adds some checks for NULL sk_user_data in the sk callback functions and it uses the sk_callback_lock to set/get that sk_user_data field. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] iscsi_ibft, be2iscsi, iscsi_boot: fix boot kobj data lifetime managementMike Christie3-103/+129
be2iscsi passes the boot functions its phba object which is allocated in the shost, but iscsi_ibft passes in a object allocated for each item to display. The problem is that iscsi_boot_sysfs was managing the lifetime of the object passed in and doing a kfree on release. This causes a double free for be2iscsi which frees the shost in its pci_remove. This patch fixes the problem by adding a release callback which the drivers can call kfree or a put() type of function (needed for be2iscsi which will do a get/put on the shost). Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] iscsi_boot_sysfs: have this module check for null on destructionMike Christie2-4/+5
This moves the check for NULL boot_sets to the iscsi_boot_sysfs module instead of having the drivers do it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] cxgb3i: fixed programing of the dma page sizesKaren Xie1-1/+3
Fixed missing programming of the pages sizes for DMA. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] fcoe: Rearrange fcoe port and NPIV port cleanupNeerav Parikh1-37/+49
When NPIV port destroy handler is called it does not do all the cleanup required for the given NPIV port. This was happening as some of the lport cleanup moved to fcoe_interface_cleanup() routine, which is not called as part of the vport delete process. This patch rearranges the sequence in which the fcoe_if_destory() and fcoe_interface_cleanup() functions are being called from various places in the code. It now matches the sequence they are constructed during the create process for both N_Port as well as NPIV port. Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] libfc: post reset event on lport resetVasu Dev1-0/+2
Post an FCH_EVT_LIPRESET event on lport reset as as lport reset occurs on FIP cleat virtual link, this could be due to change in fcoe vlan and this event will allow user app fcoemon to switch to new fcoe vlan. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] tcm_fc: Fixing reference counting problem which was causing ft_sess ↵Kiran Patil1-5/+16
to be deleted. Problem: After fixing the issue in TCM core w.r.t LUN Reset (Task Management request) , ran into issue where during the completing of this LUN Reset command, reference count of "ft_sess" drops to zero which caused "sess" to be deleted. Fix: As part of handling task management request (e.g. LUN Reset), TCM core function "transport_generic_do_tmr" ends up calling ft_free_cmd which in turn calls "ft_sess_put" (which drops session's reference count by 1) and then frees ft_cmd. Then function "transport_generic_do_tmr" calls "transport_cmd_check_stop" which in turn also calls ft_free_cmd (which calls ft_sess_put - which drops reference count of sess by 1, hence reference count of sess becomes zero and session gets deleted). Fix is to just send response in case of tmr from function "ft_queue_resp_code" and not delete "ft_cmd" (means don't call ft_free_cmd). Earlier code was to send the response code and also free ft_cmd. ft_free_cmd will be freed later after sending response code as a result of "transport_cmd_check_stop" (which calls ft_release_cmd -> ft_free_cmd) being called from "transport_generic_do_tmr" after sening TMR response code. Notes/Dependencies: This bug was found after fixing NULL pointer access issue in TCM core (in LUN Reset codepath) Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] libfc:Fix for exchange/seq loopup failure when FCoE stack is used as ↵Kiran Patil1-2/+24
target and connected to windows initaitor Problem: Linux based SW target (TCM) connected to windows initiator was unable to satisfy write request of size > 2K. Fix: Existing linux implememtation of FCoE stack is expecting sequence number to match w.r.t incoming framme. When DDP is used on target in response to write request from initiator, SW stack is notified only when last data frame arrives and only the pakcket header of last data frame is posted to NetRx queue of storage. When that last packet was processed in libfc:Exchange layer, implementation was expecting sequence number to match, but in this case sequence number which is embedded in FC Header is assigned by windows initaitor, hence due to sequence number mismatch post-processing which shall result into sending RSP is not done. Enhanced the code to utilize the sequence number of incoming last frame and process the packet so that, it will eventually complete the write request by sending write response (RSP) GOOD. Notes/Dependencies: This patch is validated using windows and linux initiator to make sure, it doesn't break anything. Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] fcoe: Amends previous patch, Round-robin based selection of CPU for ↵Kiran Patil1-1/+5
post processing of incoming request for FCoE target Problem: Selection of RX queue on target is based on RX-ID. FCoE used 8 Net Rx queues. HW post the packets based on rx_id % num_rx_queue. Due to this has based filtering, only one CPU is busy servicing incoming request including post-processing of incoming request. This is gating factor because 1. Only one CPU is utilized 100% while others CPUs are not used at all. 2. CPU which received request assign "sequence' by selecting exchange from per CPU pool (num_ddp_context / num_online_cpus, approxi.). Due to which if if rate of incoming request is higher than rate of servicing request, existing code path end of sending "BUSY" response (SAM_STAT_BUSY because unable to allocate exchange). Fix: Fan-out incoming request to all other CPUs excluding the CPU which is receiving all incoiming request. This path also addresses, selecting same CPU based on rx_id from received frame for completion of the request such as "releasing exchange to the per CPU Pool". This fix is applicable for FCoE target since initiator code path already takes care of selecting CPU to complete post-processing of request once OX_ID is assigned. Notes: N/A Dependencines: N/A Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] fcoe: Round-robin based selection of CPU for post-processing of ↵Kiran Patil1-1/+38
incoming commands Problem: Earlier mechanism of selection of CPU was, to select the same CPU which has received incoming request. Hence in case of rx_id = 0xFFFF, request was always posted to same NetRx queue, hence only 1 CPU is utilized for handling the command. It was also causing problem of "running out of exchanges from per CPU pool of exchanges (in case of DDP offload) Fix: Implemented new algo. to select CPU for post-processing of incoming commands when rx_id is unknown. This is simple Round robin algo. for CPU selection. Notes/Dependencies: N/A Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] fcoe: Unable to select the exchangeID from offload pool for storage ↵Kiran Patil1-2/+17
targets Problem: When initiator sends write command to target, target tries to assign new sequence. It allocates new exchangeID (RX_ID) always from non-offloaded pool (Non-offload EMA) Fix: Enhanced fcoe_oem_match routine to look at F_CTL flags and if it is exchange responder and command type is WRITEDATA, then function returns TRUE instead of FALSE. This function is used to determine which pool to use (offload pool of exchange is used only if this function returns TRUE). Technical Notes: N/A Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] fcoe: support ndo_fcoe_ddp_target() for DDP in FCoE targeYi Zou1-1/+25
Add ddp_target() support to the Open-FCoE sw fcoe hba driver (fcoe.ko). Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] libfc, tcm_fc: add ddp_targ() to libfc function template to supprot ↵Yi Zou1-2/+3
FCoE DDP in target mode The fcoe driver can implement ddp_targ() similarly to ddp_setup() when fcoe stack works with existing target frame, e.g., tcm, where the ddp_targ() would eventually point to the underlying hardware driver's implementation of ndo_fcoe_ddp_targ() through net_device_ops. This new API sets up DDP context for target appropriately by setting required bits for DDP context. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] libfc: Enhancement to RPORT state machine applicable only for VN2VN modeKiran Patil1-0/+14
Problem: Existing RPORT state machine continues witg FLOGI/PLOGI process only after it receices beacon from other end. Once claiming stage is over (either clain notify or clain repose), beacon is sent and state machine enters into operational mode where it initiates the rlogin process (FLOGI/PLOGI) to the peer but before this rlogin is initiated, exitsing implementation checks if it received beacon from other end, it beacon is not received yet, rlogin process is not initiated. Other end initiates FLOGI but peer end keeps on rejecting FLOGI, hence after 3 retries other end deletes associated rport, then sends a beacon. Once the beacon is received, peer end now initiates rlogin to the peer end but since associated rport is deleted FLOGI is neither accepted nor the reject response send out because rport is deleted. Hence unable to proceed withg FLOGI/PLOGI process and fails to establish VN2VN connection. Fix: VN2VN spec is not standard yet but based on exitsing collateral on T11, it appears that, both end shall send beacon and enter into 'operational mode' without explictly waiting for beacon from other end. Fix is to allow the RPORT login process as long as respective RPORT is created (as part of claim notification / claim response) even though state of RPORT is INIT. Means don't wait for beacon from peer end, if peer end initiates FLOGI (means peer end exist and responding). Notes: This patch is preparing the FCoE stack for target wrt offload. This is generic patch and harmless even if applied on storage initiator because 'else if' condition of function 'fcoe_oem_found' shall evaluate to TRUE only for targets. Dependencies: None Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]Andy Grover3-14/+13
struct scsi_lun is also just a struct with an array of 8 octets (64 bits) but using it instead in iscsi structs lets us call scsilun_to_int without a cast, and also lets us copy it using assignment, instead of memcpy(). Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] mpt2sas: Bump version 09.100.00.00Kashyap, Desai1-3/+3
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] mpt2sas: Adding support for customer specific brandingKashyap, Desai2-2/+20
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] mpt2sas: Added DID_NO_CONNECT return when driver remove and avoid ↵Kashyap, Desai1-2/+1
shutdown call Driver should not call shutdown call from _scsih_remove otherwise, The scsi midlayer can be deadlocked when devices are removed from the driver pci_driver->shutdown handler. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] mpt2sas: fix broadcast AEN and task management issueKashyap, Desai3-56/+202
Properly handling of target reset in multi-initiator environment Clean up in broadcast change handling: (1) Need to look at the status of each task management request, and retry the TM when there are failures. (2) Need quiescence IO so the driver doesn't take on more IO request while it's in the middle of sending TM request to firmware (3) Add support to keep track of how many pending broadcast AEN events are received while the broadcast handling is active, then loop back at the end of this routine if there were any events received. Clean up in mpt2sas_scsih_issue_tm routine: (1) Make sure proper status is returned when host reset fails (2) Clean up sanity checks near end of routine, insuring all outstanding IOs were completed. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] mpt2sas: Set max_sector count from module parameterKashyap, Desai1-0/+23
This feature is to override the default max_sectors setting at load time, taking max_sectors as an command line option when loading the driver. The setting is currently hard-coded in the driver to 8192 sectors (4MB transfers). If max_sectors is specified at load time, minimum specified setting will be 64, and the maximum is 8192. The driver will modify the setting to be on even boundary. If max_sectors is not specified, the driver will default to 8192. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] mpt2sas MPI next revision header updateKashyap, Desai4-21/+75
mpt2sas driver revision q header update: (1) Modified the descriptions of the LocalAddress bit in the Flags field of the MPI SGE Format description and the MPI Simple Element. (2) Modified Data Location Address Space bits in the Flags field of the IEEE Chain Element. (3) Added more detail to the description of the DataLength field for the SCSI IO Request and Target Assist Request. Removed restriction on using chained SGLs when using multicast or bidirectional support. (4) In Manufacturing Page 7, added ReceptacleID field to ConnectorInfo, and reworked how the Pinout field is used. (5) In IO Unit Page 7, added BoardTemperature and BoardTemperatureUnits fields. (6) In IOC Page 1, changed CoalescingTimeout to units of half-microsecond and updated descriptions. (7) Modified descriptions of SATASlumberTimeout and SASSlumberTimeout fields in SAS IO Unit Page 5 to indicate the timers start after partial mode is entered. (8) Added Extended Manufacturing configuration pages. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] mpt2sas: Fixed Big Indian Issues on 32 bit PPCKashyap, Desai6-70/+96
This patch addresses many endian issues solved by runing sparse with the option __CHECK_ENDIAN__ turned on. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] fnic: fix incorrect use of SLAB_CACHE_DMA flagAbhijeet Joglekar3-19/+6
Driver was incorrectly using the SLAB_CACHE_DMA flag when creating a cache for SGLs. fnic device does not have 24-bit DMA restrictions. Remove the flag and allocations from ZONE_DMA. Thanks to Roland Dreier and David Rientjes for pointing out the bug. Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Update the driver version to 3.0.2.0Krishna Gudipati1-1/+1
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Add BSG interface to support ELS, CT and vendor commands.Krishna Gudipati10-1/+955
- Added BSG interface support to BFA driver - Adds support to send ELS/CT FC passthru commands and few vendor specific BSG requests. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Driver initialization and model description fixKrishna Gudipati6-40/+101
- Moved FCS initialization, which internally does the im_port creation as well as the scsi_host creation before bfa_init. Once the bfa_init is complete & successful: - Reset the FCS base port cfg params such as pwwn/nwwn and setup fc host params - based on the values learned during the ioc getattr request. - Change needed to support BSG commands even on bfa init failure. - Model description fixes for Brocade adapters. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Enhancement for fcpim and IO tag handling.Krishna Gudipati6-93/+263
- Enhancements to FCPIM module. - Introduced IO tag management to allocate/release IOs to FCPIM module from a free IOtag pool. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: FC credit recovery and misc bug fixes.Krishna Gudipati13-60/+129
- Introduce FC credit recovery. - Added module parameter to enable/disable credit recovery. Bug Fixes: - Removed check for ignoring plogi from initiator in switched fabric mode. - The ABTS for PLOGI is going out few millisecs earlier due to FW timer calibration (around 300 miilisecs earlier). So there is a window if an accept comes during this time HBA would have initiated an ABORT. - Added 1 to FC_ELS_TOV for compensating for FW timer. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Brocade-1860 Fabric Adapter 16Gbs support and flash controller ↵Krishna Gudipati10-31/+130
fixes. - Added support for 16Gbps. - Added logic to flush pending mailbox command queue when IOC is disabled. - Fix to Halt the flash controller during fw initialization - since when asic blck is programmed flash controller's continuous access blocks f/w access to flash. - Added new asic based card types and modified IOC get card model routine. - Added PLL init fix to do LPU reset every time we do a memory initialization, since not doing so will cause LPU to be uninitialized during driver load. - Added fix to Halt flash controller before PLL initialization. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: IOC and PLL init changes for Brocade-1860 Fabric Adapter.Krishna Gudipati10-137/+188
- Introduced IOC poll mechanism which replaces current interrupt based FW READY method. - The timer based poll routine in IOC will query the ioc_fwstate register to see if there is a state change in FW, and sends the READY event. - Bug fixes in the new asic PLL initialization. - Added logic to handle CPE/RME queue interrupts before iocfc config done. 1. Use the queue_process flag to see if iocfc configuration is done in INTX mode. 2. Split the MSIX handler installation in two - one for IOC intr handler and the other for cpe/rme queue handler - and delay assigning queue handlers until iocfc config is done in MSIX mode. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Changes to support vport disable and enable operations.Krishna Gudipati9-44/+181
Made changes to FCS lport, vport state machines to support vport enable / disable operations. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Brocade-1860 Fabric Adapter Hardware EnablementKrishna Gudipati18-1371/+1262
- Added support for Brocade-1860 Fabric Adapter. - Made changes to support single firmware image per asic type. - Combined bfi_cbreg.h and bfi_ctreg.h defines into bfi_reg.h with only minimal defines used by host. - Added changes to setup CPE/RME Queue register offsets based on firmware response. - Removed queue register offset initializations and added register offsets to BFI config response message. - Added Brocade-1860 asic specific interrupt status definitions and mailbox interfaces. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Add pbc port disable check and fix LPS message nameKrishna Gudipati6-11/+56
- Add PBC port Disabled condition check. - Rename incorrectly named LPS I2H messages. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Introduce IOC event notification mechanism.Krishna Gudipati6-58/+88
Introduced a generic event notification callback function that receives IOC_ENABLED, IOC_DISABLED, IOC_FAILED events and notifies the modules registered for these events. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] bfa: Introduced generic address len pair to represent DMA memory chunk.Krishna Gudipati4-59/+32
- Avoid the use of hardware defined structure bfi_sge_s for DMA requests in host. - Defined a generic address len pair to represent a DMA memory chunk (bfi_alen_s). Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] sun3: Remove commented out merge_contiguous_buffersGeert Uytterhoeven1-58/+0
This fixes: drivers/scsi/sun3_NCR5380.c:475: warning: ‘merge_contiguous_buffers’ defined but not used Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sam Creasey <sammy@sammy.net> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] sun3: Add various missing NDEBUG* definitionsGeert Uytterhoeven2-4/+12
This fixes a.o.: drivers/scsi/sun3_scsi.h:225:5: warning: "NDEBUG" is not defined drivers/scsi/sun3_scsi.h:345:14: warning: "NDEBUG_ABORT" is not defined drivers/scsi/sun3_scsi.h:351:14: warning: "NDEBUG_TAGS" is not defined drivers/scsi/sun3_scsi.h:357:14: warning: "NDEBUG_MERGING" is not defined Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] sun3: Check for NCR_TIMEOUT being defined instead of having a valueGeert Uytterhoeven1-1/+1
This fixes: drivers/scsi/sun3_NCR5380.c:1448:5: warning: "NCR_TIMEOUT" is not defined Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] sun3: Provide a dummy NCR5380_exit()Geert Uytterhoeven3-0/+7
and call it from sun3scsi_release(), cfr. the other NCR5380 drivers. This fixes: drivers/scsi/NCR5380.h:303: warning: ‘NCR5380_exit’ declared ‘static’ but never defined Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] sun3: sun3scsi_detect() and NCR5380_init() should be __initGeert Uytterhoeven3-3/+3
WARNING: vmlinux.o(.text+0x18545c): Section mismatch in reference from the function sun3scsi_detect() to the function .init.text:NCR5380_print_options() WARNING: vmlinux.o(.text+0x18556c): Section mismatch in reference from the function sun3scsi_detect() to the function .init.text:NCR5380_print_options() WARNING: vmlinux.o(.text+0x187692): Section mismatch in reference from the function sun3scsi_detect() to the function .init.text:NCR5380_print_options() WARNING: vmlinux.o(.text+0x187770): Section mismatch in reference from the function sun3scsi_detect() to the function .init.text:NCR5380_print_options() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] mac_scsi: Remove unused variable default_instanceGeert Uytterhoeven1-11/+1
This fixes: drivers/scsi/mac_scsi.c:220:5: warning: "NDEBUG_ABORT" is not defined drivers/scsi/mac_scsi.c:271:5: warning: "NDEBUG_ABORT" is not defined Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] mac_scsi: macscsi_detect() should be __initGeert Uytterhoeven1-1/+1
WARNING: vmlinux.o(.text+0x1ecd3e): Section mismatch in reference from the function macscsi_detect() to the function .devinit.text:NCR5380_init() WARNING: vmlinux.o(.text+0x1ecddc): Section mismatch in reference from the function macscsi_detect() to the function .init.text:NCR5380_print_options() WARNING: vmlinux.o(.text+0x1ece60): Section mismatch in reference from the function macscsi_detect() to the function .init.text:NCR5380_print_options() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] atari_NCR5380: Provide a dummy NCR5380_exit()Geert Uytterhoeven2-0/+6
and call it from atari_scsi_release(), cfr. the other NCR5380 drivers. This fixes: drivers/scsi/NCR5380.h:303: warning: ‘NCR5380_exit’ declared ‘static’ but never defined Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] aha152x: add missing ISA PNP IDsOndrej Zary1-4/+13
Add ISA PNP IDs of the following cards to aha152x driver: AVA-1502 AVA-1505 AHA-1510 AVA-1515 AHA-1520 AHA-1522 AHA-1530 AHA-1532 AIC-6360 (list from SCSI.INF file) This makes my AHA-1530P card (has ADP3015 ID) work automatically. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-30[SCSI] Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups.Werner Fink1-0/+2
This patch resulted from the discussion at https://bugzilla.novell.com/show_bug.cgi?id=679277, https://bugzilla.novell.com/show_bug.cgi?id=681840 . Signed-off-by: Werner Fink <werner@novell.com> Signed-off-by: Ankit Jain <jankit@suse.de> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] ses: requesting a fault indicationDouglas Gilbert1-1/+5
Noticed that when the sysfs interface of the SCSI SES driver was used to request a fault indication the LED flashed but the buzzer didn't sound. So it was doing what REQUEST IDENT (locate) should do. Changelog: - fix the setting of REQUEST FAULT for the device slot and array device slot elements in the enclosure control diagnostic page - note the potentially defective code that reads the FAULT SENSED and FAULT REQUESTED bits from the enclosure status diagnostic page The attached patch is against git/scsi-misc-2.6 Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] atari_NCR5380: Remove obsolete variable oldtoGeert Uytterhoeven1-1/+0
commit 8ce7955aa52c37db1425ea4bd4edcfa67e253454 ("[SCSI] atari_NCR5380: update_timeout removal") removed all users, but not the avtual variable. Suggested-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>