summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2007-08-27[IRDA]: Do not do pointless kmalloc return value cast in KingSun driverJesper Juhl1-2/+2
kmalloc() returns a void pointer, so there is no need to cast it in drivers/net/irda/kingsun-sir.c::kingsun_probe(). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-27[IOAT]: ioatdma needs to to play nice in a multi-dma-client worldShannon Nelson1-14/+4
Now that the DMA engine has a multi-client interface, fix the ioatdma driver to play along. At the same time, remove a couple of unnecessary reads and writes. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-27[SLIP]: trivial sparse warning fixStephen Hemminger1-1/+1
Function declared static in forward declaration, but not in actual code. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-27[EQL]: sparse warning fixStephen Hemminger1-1/+1
More noodlin on long flights, patch bin. Sparse warning fix for eql. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-25Merge branch 'for-linus' of ↵Linus Torvalds3-18/+51
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: Add ref-counting for sbp2 orbs (fix command abortion) firewire: fix unloading of fw-ohci while devices are attached ieee1394: sbp2: fix sbp2_remove_device for error cases
2007-08-25firewire: Add ref-counting for sbp2 orbs (fix command abortion)Kristian Høgsberg1-9/+40
This handles the case where we get the status write before getting the complete_transaction callback ("status write for unknown orb"). In this case, we just assume that the initial orb pointer transaction succeeded and finish the orb. To prevent the transaction callback from touching freed memory, we ref-count the orb structures. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25firewire: fix unloading of fw-ohci while devices are attachedStefan Richter1-2/+4
Fix panic in run_timer_softirq right after "modprobe -r firewire-ohci" if a FireWire disk was attached and firewire-sbp2 loaded. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25ieee1394: sbp2: fix sbp2_remove_device for error casesStefan Richter1-7/+7
Bug found by Olaf Hering <olh@suse.de>: sbp2util_remove_command_orb_pool requires a valid lu->hi pointer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25Merge branch 'agp-patches' of ↵Linus Torvalds8-5/+29
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp: balance ioremap checks agp: Add device id for P4M900 to via-agp module efficeon-agp leaks 'struct agp_bridge_data' in error paths of agp_efficeon_probe()
2007-08-25Merge branch 'drm-patches' of ↵Linus Torvalds2-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: ioremap return value checks drm/via: Fix dmablit when blit queue is full drm_rmmap_ioctl(): remove dead code
2007-08-25Merge branch 'upstream-linus' of ↵Linus Torvalds10-86/+64
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: myri10ge: update driver version to 1.3.2-1.269 myri10ge: use pcie_get/set_readrq ehea: fix queue destructor ehea: fix module parameter description ehea: fix interface to DLPAR tools sgiseeq: Fix return type of sgiseeq_remove sky2 1.17 sky2: only bring up watchdog if link is active sky2: clear PCI power control reg at startup DM9000: fix interface hang under load phy layer: fix genphy_setup_forced (don't reset) Don't use GFP_DMA for zone allocation. fix realtek phy id in forcedeth
2007-08-25Merge branch 'release' of ↵Linus Torvalds36-306/+450
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (30 commits) ACPI: work around duplicate name "VID" problem on T61 acpiphp_ibm: add missing '\n' to error message ACPI: add dump_stack() to trace acpi_format_exception programming errors make drivers/acpi/scan.c:create_modalias() static ACPI: Fix a warning of discarding qualifiers from pointer target type ACPI: "ACPI handle has no context!" should be KERN_DEBUG ACPI video hotkey: export missing ACPI video hotkey events via input layer ACPI: Validate XSDT, use RSDT if XSDT fails ACPI: /proc/acpi/thermal_zone trip points are now read-only, mark them as such ACPI: fix ia64 allnoconfig build PNP: remove null pointer checks PNP: remove MODULE infrastructure ISAPNP: removed unused isapnp_detected and ISAPNP_DEBUG PNPACPI: remove unnecessary casts of "void *" PNPACPI: simplify irq_flags() PNP: fix up after Lindent ACPI: enable GPEs before calling _WAK on resume asus-laptop: Fix rmmod of asus_laptop sony-laptop: call sonypi_compat_init earlier sony-laptop: enable Vaio FZ events ...
2007-08-25drm: ioremap return value checksScott Thompson1-1/+7
Signed-off-by: Scott Thompson <postfail <at> hushmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25agp: balance ioremap checksScott Thompson6-5/+22
patchset against 2.6.23-rc3. corrects missing ioremap return checks and balancing on iounmap calls, integrated changes per list recommendations on the original set of patches.. Signed-off-by: Scott Thompson <postfail <at> hushmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25agp: Add device id for P4M900 to via-agp moduleXavier Bachelot1-0/+5
Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25myri10ge: update driver version to 1.3.2-1.269Brice Goglin1-1/+1
Update myri10ge driver version to 1.3.2-1.269. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25myri10ge: use pcie_get/set_readrqBrice Goglin1-26/+6
Based on a patch from Peter Oruba, convert myri10ge to use pcie_get_readrq() and pcie_set_readrq() instead of our own PCI calls and arithmetics. These driver changes incorporate the proposed PCI-X / PCI-Express read byte count interface. Reading and setting those values doesn't take place "manually", instead wrapping functions are called to allow quirks for some PCI bridges. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off by: Peter Oruba <peter.oruba@amd.com> Based on work by Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25ehea: fix queue destructorJan-Bernd Themann1-0/+6
Includes hcp_epas_dtor in eq/cq/qp destructors to unmap HW register. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25ehea: fix module parameter descriptionJan-Bernd Themann1-1/+1
Update the module parameter description of "use_mcs" to show correct default value Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25ehea: fix interface to DLPAR toolsJan-Bernd Themann1-3/+3
Userspace DLPAR tool expects decimal numbers to be written to and read from sysfs entries. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sgiseeq: Fix return type of sgiseeq_removeRalf Baechle1-1/+3
The driver remove method needs to return an int not void. This was just never noticed because usually this driver is not being built as a module. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2 1.17Stephen Hemminger1-1/+1
Mark new version to track if current driver is in use. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2: only bring up watchdog if link is activeStephen Hemminger2-31/+27
This fixes the extra timer overhead that people were whining about as a 2.6.23 regression. Running the watchdog timer all the time is unneeded. Change it to run only if link is up, and reduce frequency to save power. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2: clear PCI power control reg at startupStephen Hemminger1-1/+6
Make sure PCI register for PHY power gets cleared on boot, and make sure to avoid any PCI posting problems. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25DM9000: fix interface hang under loadFlorian Westphal1-18/+7
When transferring data at full speed, the DM9000 network interface sometimes stops sending/receiving data. Worse, ksoftirqd consumes 100% cpu and the net tx watchdog never triggers. Fix by spin_lock_irqsave() in dm9000_start_xmit() to prevent the interrupt handler from interfering. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25phy layer: fix genphy_setup_forced (don't reset)Domen Puncer1-1/+1
Writing BMCR_RESET bit will reset MII_BMCR to default values. This is clearly not what we want. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25Don't use GFP_DMA for zone allocation.Ralf Baechle1-1/+1
IP32 doesn't even have a ZONE_DMA so no point in using GFP_DMA in any IP32-specific device driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25fix realtek phy id in forcedethWilly Tarreau1-1/+1
As noticed by Chuck Ebbert, commit c5e3ae8823693b260ce1f217adca8add1bc0b3de introduced a copy-paste typo, as realtek phy is 0x732 and not 0x1c1. Obvious fix below suggested by Ayaz Abdulla. Signed-off-by: Willy Tarreau <w@1wt.eu> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25Pull bugzilla-8798 into release branchLen Brown1-0/+8
2007-08-25ACPI: work around duplicate name "VID" problem on T61Zhang Rui1-0/+8
This can only fix the problem that more than one video bus device have the same AML name "VID". ie. the proc I/F for the second "VID" video bus device is located under /proc/acpi/video/VID1/... As this is really rare and the ACPI proc I/F is a legacy feature that we are planning to remove. We won't provide a generic solution for this problem. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25Pull events into release branchLen Brown16-47/+108
Conflicts: drivers/acpi/video.c Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25Pull misc into release branchLen Brown5-5/+7
2007-08-25acpiphp_ibm: add missing '\n' to error messageJeremy Fitzhardinge1-1/+1
Add missing \n to error in ibm_find_acpi_device. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Adrian Bunk <trivial@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25ACPI: add dump_stack() to trace acpi_format_exception programming errorsAndrew Morton1-0/+1
Dump the stack so we can find the secretive caller to acpi_format_exception(). Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25make drivers/acpi/scan.c:create_modalias() staticAdrian Bunk1-2/+3
This patch makes the needlessly global create_modalias() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25ACPI: Fix a warning of discarding qualifiers from pointer target typeAl Viro1-1/+1
drivers/acpi/ec.c: In function `acpi_ec_ecdt_probe': drivers/acpi/ec.c:873: warning: passing arg 1 of `acpi_get_devices' discards qualifiers from pointer target type Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25ACPI: "ACPI handle has no context!" should be KERN_DEBUGShaohua Li1-1/+1
Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25Pull suspend into release branchLen Brown1-8/+11
2007-08-25Pull video into release branchLen Brown1-4/+87
2007-08-25Pull thermal into release branchLen Brown1-7/+40
2007-08-25ACPI video hotkey: export missing ACPI video hotkey events via input layerLuming Yu1-1/+88
Signed-off-by: Yu Luming <luming.yu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25Pull sony into release branchLen Brown1-6/+18
2007-08-25Pull pnp into release branchLen Brown13-200/+42
2007-08-25Pull ec into release branchLen Brown1-16/+31
2007-08-25Pull bugzilla-8630 into release branchLen Brown1-0/+71
2007-08-25Pull battery into release branchLen Brown1-17/+30
2007-08-25Pull asus into release branchLen Brown1-1/+2
2007-08-25DM_MULTIPATH_RDAC: "scsi_normalize_sense" undefinedRandy Dunlap1-1/+1
DM_MULTIPATH_RDAC uses SCSI API(s) and is for a SCSI device, so add SCSI to its depends on to prevent build errors. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> [ Tested and Verified by Chandra Seetharaman ] Acked-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-25ACPI: Validate XSDT, use RSDT if XSDT failsZhao Yakui1-0/+71
ACPI 1.0 used an RSDT with 32-bit physical addresses. ACPI 2.0 adds an XSDT with 32-bit physical addresses. An ACPI 2.0 aware OS is supposed to use the XSDT (when present) instead of the RSDT. However, several systems have failed because the XSDT contains NULL entries -- while it is missing pointers to needed tables, such as SSDTs. When we find an XSDT with NULL entries, discard it and use the ACPI 1.0 RSDT instead. http://bugzilla.kernel.org/show_bug.cgi?id=8630 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25ACPI: /proc/acpi/thermal_zone trip points are now read-only, mark them as suchPavel Machek1-2/+2
Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 04:58:55 +0300