summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-11-10PM: runtime: Resume the device earlier in __device_release_driver()Rafael J. Wysocki1-2/+5
commit 9226c504e364158a17a68ff1fe9d67d266922f50 upstream. Since the device is resumed from runtime-suspend in __device_release_driver() anyway, it is better to do that before looking for busy managed device links from it to consumers, because if there are any, device_links_unbind_consumers() will be called and it will cause the consumer devices' drivers to unbind, so the consumer devices will be runtime-resumed. In turn, resuming each consumer device will cause the supplier to be resumed and when the runtime PM references from the given consumer to it are dropped, it may be suspended. Then, the runtime-resume of the next consumer will cause the supplier to resume again and so on. Update the code accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support") Cc: All applicable <stable@vger.kernel.org> # All applicable Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10usb: mtu3: fix panic in mtu3_gadget_stop()Macpaul Lin1-0/+1
commit 20914919ad31849ee2b9cfe0428f4a20335c9e2a upstream. This patch fixes a possible issue when mtu3_gadget_stop() already assigned NULL to mtu->gadget_driver during mtu_gadget_disconnect(). [<ffffff9008161974>] notifier_call_chain+0xa4/0x128 [<ffffff9008161fd4>] __atomic_notifier_call_chain+0x84/0x138 [<ffffff9008162ec0>] notify_die+0xb0/0x120 [<ffffff900809e340>] die+0x1f8/0x5d0 [<ffffff90080d03b4>] __do_kernel_fault+0x19c/0x280 [<ffffff90080d04dc>] do_bad_area+0x44/0x140 [<ffffff90080d0f9c>] do_translation_fault+0x4c/0x90 [<ffffff9008080a78>] do_mem_abort+0xb8/0x258 [<ffffff90080849d0>] el1_da+0x24/0x3c [<ffffff9009bde01c>] mtu3_gadget_disconnect+0xac/0x128 [<ffffff9009bd576c>] mtu3_irq+0x34c/0xc18 [<ffffff90082ac03c>] __handle_irq_event_percpu+0x2ac/0xcd0 [<ffffff90082acae0>] handle_irq_event_percpu+0x80/0x138 [<ffffff90082acc44>] handle_irq_event+0xac/0x148 [<ffffff90082b71cc>] handle_fasteoi_irq+0x234/0x568 [<ffffff90082a8708>] generic_handle_irq+0x48/0x68 [<ffffff90082a96ac>] __handle_domain_irq+0x264/0x1740 [<ffffff90080819f4>] gic_handle_irq+0x14c/0x250 [<ffffff9008084cec>] el1_irq+0xec/0x194 [<ffffff90085b985c>] dma_pool_alloc+0x6e4/0xae0 [<ffffff9008d7f890>] cmdq_mbox_pool_alloc_impl+0xb0/0x238 [<ffffff9008d80904>] cmdq_pkt_alloc_buf+0x2dc/0x7c0 [<ffffff9008d80f60>] cmdq_pkt_add_cmd_buffer+0x178/0x270 [<ffffff9008d82320>] cmdq_pkt_perf_begin+0x108/0x148 [<ffffff9008d824d8>] cmdq_pkt_create+0x178/0x1f0 [<ffffff9008f96230>] mtk_crtc_config_default_path+0x328/0x7a0 [<ffffff90090246cc>] mtk_drm_idlemgr_kick+0xa6c/0x1460 [<ffffff9008f9bbb4>] mtk_drm_crtc_atomic_begin+0x1a4/0x1a68 [<ffffff9008e8df9c>] drm_atomic_helper_commit_planes+0x154/0x878 [<ffffff9008f2fb70>] mtk_atomic_complete.isra.16+0xe80/0x19c8 [<ffffff9008f30910>] mtk_atomic_commit+0x258/0x898 [<ffffff9008ef142c>] drm_atomic_commit+0xcc/0x108 [<ffffff9008ef7cf0>] drm_mode_atomic_ioctl+0x1c20/0x2580 [<ffffff9008ebc768>] drm_ioctl_kernel+0x118/0x1b0 [<ffffff9008ebcde8>] drm_ioctl+0x5c0/0x920 [<ffffff900863b030>] do_vfs_ioctl+0x188/0x1820 [<ffffff900863c754>] SyS_ioctl+0x8c/0xa0 Fixes: df2069acb005 ("usb: Add MediaTek USB3 DRD driver") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1604642069-20961-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10USB: Add NO_LPM quirk for Kingston flash driveAlan Stern1-0/+3
commit afaa2e745a246c5ab95103a65b1ed00101e1bc63 upstream. In Bugzilla #208257, Julien Humbert reports that a 32-GB Kingston flash drive spontaneously disconnects and reconnects, over and over. Testing revealed that disabling Link Power Management for the drive fixed the problem. This patch adds a quirk entry for that drive to turn off LPM permanently. CC: Hans de Goede <jwrdegoede@fedoraproject.org> CC: <stable@vger.kernel.org> Reported-and-tested-by: Julien Humbert <julroy67@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201102145821.GA1478741@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10USB: serial: option: add Telit FN980 composition 0x1055Daniele Palmas1-0/+2
commit db0362eeb22992502764e825c79b922d7467e0eb upstream. Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231Daniele Palmas1-0/+6
commit 489979b4aab490b6b917c11dc02d81b4b742784a upstream. Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com [ johan: add comments after entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10USB: serial: option: add Quectel EC200T module supportZiyi Cao1-0/+2
commit a46b973bced1ba57420752bf38426acd9f6cbfa6 upstream. Add usb product id of the Quectel EC200T module. Signed-off-by: Ziyi Cao <kernel@septs.pw> Link: https://lore.kernel.org/r/17f8a2a3-ce0f-4be7-8544-8fdf286907d0@www.fastmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10USB: serial: cyberjack: fix write-URB completion raceJohan Hovold1-1/+6
commit 985616f0457d9f555fff417d0da56174f70cc14f upstream. The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10serial: txx9: add missing platform_driver_unregister() on error in ↵Qinglang Miao1-0/+3
serial_txx9_init commit 0c5fc92622ed5531ff324b20f014e9e3092f0187 upstream. Add the missing platform_driver_unregister() before return from serial_txx9_init in the error handling case when failed to register serial_txx9_pci_driver with macro ENABLE_SERIAL_TXX9_PCI defined. Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/") Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20201103084942.109076-1-miaoqinglang@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10serial: 8250_mtk: Fix uart_get_baud_rate warningClaire Chang1-1/+1
commit 912ab37c798770f21b182d656937072b58553378 upstream. Mediatek 8250 port supports speed higher than uartclk / 16. If the baud rates in both the new and the old termios setting are higher than uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered. Passing NULL as the old termios so uart_get_baud_rate() will use uartclk / 16 - 1 as the new baud rate which will be replaced by the original baud rate later by tty_termios_encode_baud_rate() in mtk8250_set_termios(). Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping") Signed-off-by: Claire Chang <tientzu@chromium.org> Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10vt: Disable KD_FONT_OP_COPYDaniel Vetter1-22/+2
commit 3c4e0dff2095c579b142d5a0693257f1c58b4804 upstream. It's buggy: On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote: > We recently discovered a slab-out-of-bounds read in fbcon in the latest > kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that > "fbcon_do_set_font" did not handle "vc->vc_font.data" and > "vc->vc_font.height" correctly, and the patch > <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this > issue. > > Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and > use KD_FONT_OP_SET again to set a large font.height for tty1. After that, > we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data > in "fbcon_do_set_font", while tty1 retains the original larger > height. Obviously, this will cause an out-of-bounds read, because we can > access a smaller vc_font.data with a larger vc_font.height. Further there was only one user ever. - Android's loadfont, busybox and console-tools only ever use OP_GET and OP_SET - fbset documentation only mentions the kernel cmdline font: option, not anything else. - systemd used OP_COPY before release 232 published in Nov 2016 Now unfortunately the crucial report seems to have gone down with gmane, and the commit message doesn't say much. But the pull request hints at OP_COPY being broken https://github.com/systemd/systemd/pull/3651 So in other words, this never worked, and the only project which foolishly every tried to use it, realized that rather quickly too. Instead of trying to fix security issues here on dead code by adding missing checks, fix the entire thing by removing the functionality. Note that systemd code using the OP_COPY function ignored the return value, so it doesn't matter what we're doing here really - just in case a lone server somewhere happens to be extremely unlucky and running an affected old version of systemd. The relevant code from font_copy_to_all_vcs() in systemd was: /* copy font from active VT, where the font was uploaded to */ cfo.op = KD_FONT_OP_COPY; cfo.height = vcs.v_active-1; /* tty1 == index 0 */ (void) ioctl(vcfd, KDFONTOP, &cfo); Note this just disables the ioctl, garbage collecting the now unused callbacks is left for -next. v2: Tetsuo found the old mail, which allowed me to find it on another archive. Add the link too. Acked-by: Peilin Ye <yepeilin.cs@gmail.com> Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html References: https://github.com/systemd/systemd/pull/3651 Cc: Greg KH <greg@kroah.com> Cc: Peilin Ye <yepeilin.cs@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10ACPI: NFIT: Fix comparison to '-ENXIO'Zhang Qilong1-1/+1
[ Upstream commit 85f971b65a692b68181438e099b946cc06ed499b ] Initial value of rc is '-ENXIO', and we should use the initial value to check it. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10drm/vc4: drv: Add error handding for bindHoegeun Kwon1-0/+1
[ Upstream commit 9ce0af3e9573fb84c4c807183d13ea2a68271e4b ] There is a problem that if vc4_drm bind fails, a memory leak occurs on the drm_property_create side. Add error handding for drm_mode_config. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201027041442.30352-2-hoegeun.kwon@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10scsi: core: Don't start concurrent async scan on same hostMing Lei1-3/+4
[ Upstream commit 831e3405c2a344018a18fcc2665acc5a38c3a707 ] The current scanning mechanism is supposed to fall back to a synchronous host scan if an asynchronous scan is in progress. However, this rule isn't strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when checking shost->async_scan. When scsi_scan_host() is called concurrently, two async scans on same host can be started and a hang in do_scan_async() is observed. Fixes this issue by checking & setting shost->async_scan atomically with shost->scan_mutex. Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com Cc: Christoph Hellwig <hch@lst.de> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10of: Fix reserved-memory overlap detectionVincent Whitchurch1-2/+11
[ Upstream commit ca05f33316559a04867295dd49f85aeedbfd6bfd ] The reserved-memory overlap detection code fails to detect overlaps if either of the regions starts at address 0x0. The code explicitly checks for and ignores such regions, apparently in order to ignore dynamically allocated regions which have an address of 0x0 at this point. These dynamically allocated regions also have a size of 0x0 at this point, so fix this by removing the check and sorting the dynamically allocated regions ahead of any static regions at address 0x0. For example, there are two overlaps in this case but they are not currently reported: foo@0 { reg = <0x0 0x2000>; }; bar@0 { reg = <0x0 0x1000>; }; baz@1000 { reg = <0x1000 0x1000>; }; quux { size = <0x1000>; }; but they are after this patch: OF: reserved mem: OVERLAP DETECTED! bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000) OF: reserved mem: OVERLAP DETECTED! foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000) Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10i40e: Memory leak in i40e_config_iwarp_qvlistMartyna Szapar1-8/+15
commit 0b63644602cfcbac849f7ea49272a39e90fa95eb upstream. Added freeing the old allocation of vf->qvlist_info in function i40e_config_iwarp_qvlist before overwriting it with the new allocation. Signed-off-by: Martyna Szapar <martyna.szapar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10i40e: Fix of memory leak and integer truncation in i40e_virtchnl.cMartyna Szapar1-1/+1
commit 24474f2709af6729b9b1da1c5e160ab62e25e3a4 upstream. Fixed possible memory leak in i40e_vc_add_cloud_filter function: cfilter is being allocated and in some error conditions the function returns without freeing the memory. Fix of integer truncation from u16 (type of queue_id value) to u8 when calling i40e_vc_isvalid_queue_id function. Signed-off-by: Martyna Szapar <martyna.szapar@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [bwh: Backported to 4.14: i40e_vc_add_cloud_filter() does not exist but the integer truncation is still possible] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10i40e: Wrong truncation from u16 to u8Grzegorz Siwik1-1/+1
commit c004804dceee9ca384d97d9857ea2e2795c2651d upstream. In this patch fixed wrong truncation method from u16 to u8 during validation. It was changed by changing u8 to u32 parameter in method declaration and arguments were changed to u32. Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10i40e: add num_vectors checker in iwarp handlerSergey Nemov1-0/+10
commit 7015ca3df965378bcef072cca9cd63ed098665b5 upstream. Field num_vectors from struct virtchnl_iwarp_qvlist_info should not be larger than num_msix_vectors_vf in the hw struct. The iwarp uses the same set of vectors as the LAN VF driver. Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10i40e: Fix a potential NULL pointer dereferenceChristophe JAILLET1-0/+3
commit 54902349ee95045b67e2f0c39b75f5418540064b upstream. If 'kzalloc()' fails, a NULL pointer will be dereferenced. Return an error code (-ENOMEM) instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10sfp: Fix error handing in sfp_probe()YueHaibing1-1/+2
[ Upstream commit 9621618130bf7e83635367c13b9a6ee53935bb37 ] gpiod_to_irq() never return 0, but returns negative in case of error, check it and set gpio_irq to 0. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201031031053.25264-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10net: usb: qmi_wwan: add Telit LE910Cx 0x1230 compositionDaniele Palmas1-0/+1
[ Upstream commit 5fd8477ed8ca77e64b93d44a6dae4aa70c191396 ] Add support for Telit LE910Cx 0x1230 composition: 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20201102110108.17244-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10gianfar: Account for Tx PTP timestamp in the skb headroomClaudiu Manoil1-1/+1
[ Upstream commit d6a076d68c6b5d6a5800f3990a513facb7016dea ] When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on the second option, using skb_realloc_headroom() to create a new skb to accommodate PTP frames. Turns out that this method is not reliable, as reallocation of skbs for PTP frames along with the required overhead (skb_set_owner_w, consume_skb) is causing random crashes in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time on the same device (as seen in James' report). Note that these crashes don't occur with a single TCP stream, nor with multiple concurrent UDP streams, but only when multiple TCP streams are run concurrently with the PTP packet flow (doing skb reallocation). This patch enforces the first method, by requesting enough headroom from the stack to accommodate PTP frames, and so avoiding skb_realloc_headroom() & co, and the crashes no longer occur. There's no reason not to set needed_headroom to a large enough value to accommodate PTP frames, so in this regard this patch is a fix. Reported-by: James Jurack <james.jurack@ametek.com> Fixes: bee9e58c9e98 ("gianfar:don't add FCB length to hard_header_len") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201020173605.1173-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10gianfar: Replace skb_realloc_headroom with skb_cow_head for PTPClaudiu Manoil1-10/+2
[ Upstream commit d145c9031325fed963a887851d9fa42516efd52b ] When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on skb_realloc_headroom() to create new skbs to accommodate PTP frames. Turns out that this method is not reliable in this context at least, as skb_realloc_headroom() for PTP frames can cause random crashes, mostly in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time with the PTP flow on the same device (as seen in James' report). I also noticed that when the system is loaded by sending multiple TCP streams, the driver receives cloned skbs in large numbers. skb_cow_head() instead proves to be stable in this scenario, and not only handles cloned skbs too but it's also more efficient and widely used in other drivers. The commit introducing skb_realloc_headroom in the driver goes back to 2009, commit 93c1285c5d92 ("gianfar: reallocate skb when headroom is not enough for fcb"). For practical purposes I'm referencing a newer commit (from 2012) that brings the code to its current structure (and fixes the PTP case). Fixes: 9c4886e5e63b ("gianfar: Fix invalid TX frames returned on error queue when time stamping") Reported-by: James Jurack <james.jurack@ametek.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201029081057.8506-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10xen/events: don't use chip_data for legacy IRQsJuergen Gross1-8/+21
commit 0891fb39ba67bd7ae023ea0d367297ffff010781 upstream. Since commit c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.") Xen is using the chip_data pointer for storing IRQ specific data. When running as a HVM domain this can result in problems for legacy IRQs, as those might use chip_data for their own purposes. Use a local array for this purpose in case of legacy IRQs, avoiding the double use. Cc: stable@vger.kernel.org Fixes: c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.") Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Stefan Bader <stefan.bader@canonical.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200930091614.13660-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings <benh@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10drm/i915: Break up error capture compression loops with cond_resched()Chris Wilson1-0/+3
commit 7d5553147613b50149238ac1385c60e5c7cacb34 upstream. As the error capture will compress user buffers as directed to by the user, it can take an arbitrary amount of time and space. Break up the compression loops with a call to cond_resched(), that will allow other processes to schedule (avoiding the soft lockups) and also serve as a warning should we try to make this loop atomic in the future. Testcase: igt/gem_exec_capture/many-* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-2-chris@chris-wilson.co.uk (cherry picked from commit 293f43c80c0027ff9299036c24218ac705ce584e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05staging: octeon: Drop on uncorrectable alignment or FCS errorAlexander Sverdlin1-15/+19
commit 49d28ebdf1e30d806410eefc7de0a7a1ca5d747c upstream. Currently in case of alignment or FCS error if the packet cannot be corrected it's still not dropped. Report the error properly and drop the packet while making the code around a little bit more readable. Fixes: 80ff0fd3ab64 ("Staging: Add octeon-ethernet driver files.") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201016145630.41852-1-alexander.sverdlin@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05staging: octeon: repair "fixed-link" supportAlexander Sverdlin2-6/+9
commit 179f5dc36b0a1aa31538d7d8823deb65c39847b3 upstream. The PHYs must be registered once in device probe function, not in device open callback because it's only possible to register them once. Fixes: a25e278020bf ("staging: octeon: support fixed-link phys") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201016101858.11374-1-alexander.sverdlin@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdeviceIan Abbott1-0/+1
commit 647a6002cb41d358d9ac5de101a8a6dc74748a59 upstream. The "cb_pcidas" driver supports asynchronous commands on the analog output (AO) subdevice for those boards that have an AO FIFO. The code (in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to validate and set up the command supports output to a single channel or to two channels simultaneously (the boards have two AO channels). However, the code in `cb_pcidas_auto_attach()` that initializes the subdevices neglects to initialize the AO subdevice's `len_chanlist` member, leaving it set to 0, but the Comedi core will "correct" it to 1 if the driver neglected to set it. This limits commands to use a single channel (either channel 0 or 1), but the limit should be two channels. Set the AO subdevice's `len_chanlist` member to be the same value as the `n_chan` member, which will be 2. Cc: <stable@vger.kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20201021122142.81628-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05device property: Don't clear secondary pointer for shared primary firmware nodeAndy Shevchenko1-1/+3
commit 99aed9227073fb34ce2880cbc7063e04185a65e1 upstream. It appears that firmware nodes can be shared between devices. In such case when a (child) device is about to be deleted, its firmware node may be shared and ACPI_COMPANION_SET(..., NULL) call for it breaks the secondary link of the shared primary firmware node. In order to prevent that, check, if the device has a parent and parent's firmware node is shared with its child, and avoid crashing the link. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Reported-by: Ferry Toth <fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ferry Toth <fntoth@gmail.com> Cc: 5.9+ <stable@vger.kernel.org> # 5.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05device property: Keep secondary firmware node secondary by typeAndy Shevchenko1-1/+1
commit d5dcce0c414fcbfe4c2037b66ac69ea5f9b3f75c upstream. Behind primary and secondary we understand the type of the nodes which might define their ordering. However, if primary node gone, we can't maintain the ordering by definition of the linked list. Thus, by ordering secondary node becomes first in the list. But in this case the meaning of it is still secondary (or auxiliary). The type of the node is maintained by the secondary pointer in it: secondary pointer Meaning NULL or valid primary node ERR_PTR(-ENODEV) secondary node So, if by some reason we do the following sequence of calls set_primary_fwnode(dev, NULL); set_primary_fwnode(dev, primary); we should preserve secondary node. This concept is supported by the description of set_primary_fwnode() along with implementation of set_secondary_fwnode(). Hence, fix the commit c15e1bdda436 to follow this as well. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Cc: Ferry Toth <fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ferry Toth <fntoth@gmail.com> Cc: 5.9+ <stable@vger.kernel.org> # 5.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05hil/parisc: Disable HIL driver when it gets stuckHelge Deller2-7/+22
commit 879bc2d27904354b98ca295b6168718e045c4aa2 upstream. When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05tty: make FONTX ioctl use the tty pointer they were actually passedLinus Torvalds1-15/+17
commit 90bfdeef83f1d6c696039b6a917190dcbbad3220 upstream. Some of the font tty ioctl's always used the current foreground VC for their operations. Don't do that then. This fixes a data race on fg_console. Side note: both Michael Ellerman and Jiri Slaby point out that all these ioctls are deprecated, and should probably have been removed long ago, and everything seems to be using the KDFONTOP ioctl instead. In fact, Michael points out that it looks like busybox's loadfont program seems to have switched over to using KDFONTOP exactly _because_ of this bug (ahem.. 12 years ago ;-). Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Jiri Slaby <jirislaby@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05rtc: rx8010: don't modify the global rtc opsBartosz Golaszewski1-7/+17
commit d3b14296da69adb7825022f3224ac6137eb30abf upstream. The way the driver is implemented is buggy for the (admittedly unlikely) use case where there are two RTCs with one having an interrupt configured and the second not. This is caused by the fact that we use a global rtc_class_ops struct which we modify depending on whether the irq number is present or not. Fix it by using two const ops structs with and without alarm operations. While at it: not being able to request a configured interrupt is an error so don't ignore it and bail out of probe(). Fixes: ed13d89b08e3 ("rtc: Add Epson RX8010SJ RTC driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/ttm: fix eviction valuable range check.Dave Airlie1-1/+1
commit fea456d82c19d201c21313864105876deabe148b upstream. This was adding size to start, but pfn and start are in pages, so it should be using num_pages. Not sure this fixes anything in the real world, just noticed it during refactoring. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20201019222257.1684769-2-airlied@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05vringh: fix __vringh_iov() when riov and wiov are differentStefano Garzarella1-4/+5
commit 5745bcfbbf89b158416075374254d3c013488f21 upstream. If riov and wiov are both defined and they point to different objects, only riov is initialized. If the wiov is not initialized by the caller, the function fails returning -EINVAL and printing "Readable desc 0x... after writable" error message. This issue happens when descriptors have both readable and writable buffers (eg. virtio-blk devices has virtio_blk_outhdr in the readable buffer and status as last byte of writable buffer) and we call __vringh_iov() to get both type of buffers in two different iovecs. Let's replace the 'else if' clause with 'if' to initialize both riov and wiov if they are not NULL. As checkpatch pointed out, we also avoid crashing the kernel when riov and wiov are both NULL, replacing BUG() with WARN_ON() and returning -EINVAL. Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.") Cc: stable@vger.kernel.org Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201008204256.162292-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amdgpu: don't map BO in reserved regionMadhav Chauhan1-0/+10
commit c4aa8dff6091cc9536aeb255e544b0b4ba29faf4 upstream. 2MB area is reserved at top inside VM. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ubi: check kthread_should_stop() after the setting of task stateZhihao Cheng1-0/+13
commit d005f8c6588efcfbe88099b6edafc6f58c84a9c1 upstream. A detach hung is possible when a race occurs between the detach process and the ubi background thread. The following sequences outline the race: ubi thread: if (list_empty(&ubi->works)... ubi detach: set_bit(KTHREAD_SHOULD_STOP, &kthread->flags) => by kthread_stop() wake_up_process() => ubi thread is still running, so 0 is returned ubi thread: set_current_state(TASK_INTERRUPTIBLE) schedule() => ubi thread will never be scheduled again ubi detach: wait_for_completion() => hung task! To fix that, we need to check kthread_should_stop() after we set the task state, so the ubi thread will either see the stop bit and exit or the task state is reset to runnable such that it isn't scheduled out indefinitely. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> Fixes: 801c135ce73d5df1ca ("UBI: Unsorted Block Images") Reported-by: syzbot+853639d0cb16c31c7a14@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05iio:gyro:itg3200: Fix timestamp alignment and prevent data leak.Jonathan Cameron1-4/+11
commit 10ab7cfd5522f0041028556dac864a003e158556 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte array of smaller elements on the stack. This is fixed by using an explicit c structure. As there are no holes in the structure, there is no possiblity of data leakage in this case. The explicit alignment of ts is not strictly necessary but potentially makes the code slightly less fragile. It also removes the possibility of this being cut and paste into another driver where the alignment isn't already true. Fixes: 36e0371e7764 ("iio:itg3200: Use iio_push_to_buffers_with_timestamp()") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722155103.979802-6-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05iio:adc:ti-adc12138 Fix alignment issue with timestampJonathan Cameron1-4/+9
commit 293e809b2e8e608b65a949101aaf7c0bd1224247 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. We move to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak apart from previous readings. Note that previously no leak at all could occur, but previous readings should never be a problem. In this case the timestamp location depends on what other channels are enabled. As such we can't use a structure without misleading by suggesting only one possible timestamp location. Fixes: 50a6edb1b6e0 ("iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722155103.979802-26-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05iio:adc:ti-adc0832 Fix alignment issue with timestampJonathan Cameron1-3/+8
commit 39e91f3be4cba51c1560bcda3a343ed1f64dc916 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. We fix this issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak apart from previous readings. Note that previously no data could leak 'including' previous readings but I don't think it is an issue to potentially leak them like this now does. In this case the postioning of the timestamp is depends on what other channels are enabled. As such we cannot use a structure to make the alignment explicit as it would be missleading by suggesting only one possible location for the timestamp. Fixes: 815bbc87462a ("iio: ti-adc0832: add triggered buffer support") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722155103.979802-25-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05iio:light:si1145: Fix timestamp alignment and prevent data leak.Jonathan Cameron1-8/+11
commit 0456ecf34d466261970e0ff92b2b9c78a4908637 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 24 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable array in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. Depending on the enabled channels, the location of the timestamp can be at various aligned offsets through the buffer. As such we any use of a structure to enforce this alignment would incorrectly suggest a single location for the timestamp. Comments adjusted to express this clearly in the code. Fixes: ac45e57f1590 ("iio: light: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensors") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722155103.979802-9-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_statusPaul Cercueil1-3/+4
commit baf6fd97b16ea8f981b8a8b04039596f32fc2972 upstream. The jz4780_dma_tx_status() function would check if a channel's cookie state was set to 'completed', and if not, it would enter the critical section. However, in that time frame, the jz4780_dma_chan_irq() function was able to set the cookie to 'completed', and clear the jzchan->vchan pointer, which was deferenced in the critical section of the first function. Fix this race by checking the channel's cookie state after entering the critical function and not before. Fixes: d894fc6046fe ("dmaengine: jz4780: add driver for the Ingenic JZ4780 DMA controller") Cc: stable@vger.kernel.org # v4.0 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Artur Rojek <contact@artur-rojek.eu> Tested-by: Artur Rojek <contact@artur-rojek.eu> Link: https://lore.kernel.org/r/20201004140307.885556-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05vt: keyboard, extend func_buf_lock to readersJiri Slaby1-4/+13
commit 82e61c3909db51d91b9d3e2071557b6435018b80 upstream. Both read-side users of func_table/func_buf need locking. Without that, one can easily confuse the code by repeatedly setting altering strings like: while (1) for (a = 0; a < 2; a++) { struct kbsentry kbs = {}; strcpy((char *)kbs.kb_string, a ? ".\n" : "88888\n"); ioctl(fd, KDSKBSENT, &kbs); } When that program runs, one can get unexpected output by holding F1 (note the unxpected period on the last line): . 88888 .8888 So protect all accesses to 'func_table' (and func_buf) by preexisting 'func_buf_lock'. It is easy in 'k_fn' handler as 'puts_queue' is expected not to sleep. On the other hand, KDGKBSENT needs a local (atomic) copy of the string because copy_to_user can sleep. Use already allocated, but unused 'kbs->kb_string' for that purpose. Note that the program above needs at least CAP_SYS_TTY_CONFIG. This depends on the previous patch and on the func_buf_lock lock added in commit 46ca3f735f34 (tty/vt: fix write/write race in ioctl(KDSKBSENT) handler) in 5.2. Likely fixes CVE-2020-25656. Cc: <stable@vger.kernel.org> Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20201019085517.10176-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05vt: keyboard, simplify vt_kdgkbsentJiri Slaby1-19/+9
commit 6ca03f90527e499dd5e32d6522909e2ad390896b upstream. Use 'strlen' of the string, add one for NUL terminator and simply do 'copy_to_user' instead of the explicit 'for' loop. This makes the KDGKBSENT case more compact. The only thing we need to take care about is NULL 'func_table[i]'. Use an empty string in that case. The original check for overflow could never trigger as the func_buf strings are always shorter or equal to 'struct kbsentry's. Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20201019085517.10176-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/i915: Force VT'd workarounds when running as a guest OSChris Wilson1-1/+5
commit 8195400f7ea95399f721ad21f4d663a62c65036f upstream. If i915.ko is being used as a passthrough device, it does not know if the host is using intel_iommu. Mixing the iommu and gfx causes a few issues (such as scanout overfetch) which we need to workaround inside the driver, so if we detect we are running under a hypervisor, also assume the device access is being virtualised. Reported-by: Stefan Fritsch <sf@sfritsch.de> Suggested-by: Stefan Fritsch <sf@sfritsch.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Stefan Fritsch <sf@sfritsch.de> Cc: stable@vger.kernel.org Tested-by: Stefan Fritsch <sf@sfritsch.de> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019101523.4145-1-chris@chris-wilson.co.uk (cherry picked from commit f566fdcd6cc49a9d5b5d782f56e3e7cb243f01b8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05usb: host: fsl-mph-dr-of: check return of dma_set_mask()Ran Wang1-3/+6
commit 3cd54a618834430a26a648d880dd83d740f2ae30 upstream. fsl_usb2_device_register() should stop init if dma_set_mask() return error. Fixes: cae058610465 ("drivers/usb/host: fsl: Set DMA_MASK of usb platform device") Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Link: https://lore.kernel.org/r/20201010060308.33693-1-ran.wang_1@nxp.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05usb: cdc-acm: fix cooldown mechanismJerome Brunet2-9/+6
commit 38203b8385bf6283537162bde7d499f830964711 upstream. Commit a4e7279cd1d1 ("cdc-acm: introduce a cool down") is causing regression if there is some USB error, such as -EPROTO. This has been reported on some samples of the Odroid-N2 using the Combee II Zibgee USB dongle. > struct acm *acm = container_of(work, struct acm, work) is incorrect in case of a delayed work and causes warnings, usually from the workqueue: > WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:1474 __queue_work+0x480/0x528. When this happens, USB eventually stops working completely after a while. Also the ACM_ERROR_DELAY bit is never set, so the cooldown mechanism previously introduced cannot be triggered and acm_submit_read_urb() is never called. This changes makes the cdc-acm driver use a single delayed work, fixing the pointer arithmetic in acm_softint() and set the ACM_ERROR_DELAY when the cooldown mechanism appear to be needed. Fixes: a4e7279cd1d1 ("cdc-acm: introduce a cool down") Cc: Oliver Neukum <oneukum@suse.com> Reported-by: Pascal Vizeli <pascal.vizeli@nabucasa.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201019170702.150534-1-jbrunet@baylibre.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05usb: dwc3: core: don't trigger runtime pm when remove driverLi Jun1-2/+2
commit 266d0493900ac5d6a21cdbe6b1624ed2da94d47a upstream. No need to trigger runtime pm in driver removal, otherwise if user disable auto suspend via sys file, runtime suspend may be entered, which will call dwc3_core_exit() again and there will be clock disable not balance warning: [ 2026.820154] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 2026.825268] usb usb2: USB disconnect, device number 1 [ 2026.831017] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 2026.836806] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 2026.842029] usb usb1: USB disconnect, device number 1 [ 2026.848029] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 2026.865889] ------------[ cut here ]------------ [ 2026.870506] usb2_ctrl_root_clk already disabled [ 2026.875082] WARNING: CPU: 0 PID: 731 at drivers/clk/clk.c:958 clk_core_disable+0xa0/0xa8 [ 2026.883170] Modules linked in: dwc3(-) phy_fsl_imx8mq_usb [last unloaded: dwc3] [ 2026.890488] CPU: 0 PID: 731 Comm: rmmod Not tainted 5.8.0-rc7-00280-g9d08cca-dirty #245 [ 2026.898489] Hardware name: NXP i.MX8MQ EVK (DT) [ 2026.903020] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) [ 2026.908594] pc : clk_core_disable+0xa0/0xa8 [ 2026.912777] lr : clk_core_disable+0xa0/0xa8 [ 2026.916958] sp : ffff8000121b39a0 [ 2026.920271] x29: ffff8000121b39a0 x28: ffff0000b11f3700 [ 2026.925583] x27: 0000000000000000 x26: ffff0000b539c700 [ 2026.930895] x25: 000001d7e44e1232 x24: ffff0000b76fa800 [ 2026.936208] x23: ffff0000b76fa6f8 x22: ffff800008d01040 [ 2026.941520] x21: ffff0000b539ce00 x20: ffff0000b7105000 [ 2026.946832] x19: ffff0000b7105000 x18: 0000000000000010 [ 2026.952144] x17: 0000000000000001 x16: 0000000000000000 [ 2026.957456] x15: ffff0000b11f3b70 x14: ffffffffffffffff [ 2026.962768] x13: ffff8000921b36f7 x12: ffff8000121b36ff [ 2026.968080] x11: ffff8000119e1000 x10: ffff800011bf26d0 [ 2026.973392] x9 : 0000000000000000 x8 : ffff800011bf3000 [ 2026.978704] x7 : ffff800010695d68 x6 : 0000000000000252 [ 2026.984016] x5 : ffff0000bb9881f0 x4 : 0000000000000000 [ 2026.989327] x3 : 0000000000000027 x2 : 0000000000000023 [ 2026.994639] x1 : ac2fa471aa7cab00 x0 : 0000000000000000 [ 2026.999951] Call trace: [ 2027.002401] clk_core_disable+0xa0/0xa8 [ 2027.006238] clk_core_disable_lock+0x20/0x38 [ 2027.010508] clk_disable+0x1c/0x28 [ 2027.013911] clk_bulk_disable+0x34/0x50 [ 2027.017758] dwc3_core_exit+0xec/0x110 [dwc3] [ 2027.022122] dwc3_suspend_common+0x84/0x188 [dwc3] [ 2027.026919] dwc3_runtime_suspend+0x74/0x9c [dwc3] [ 2027.031712] pm_generic_runtime_suspend+0x28/0x40 [ 2027.036419] genpd_runtime_suspend+0xa0/0x258 [ 2027.040777] __rpm_callback+0x88/0x140 [ 2027.044526] rpm_callback+0x20/0x80 [ 2027.048015] rpm_suspend+0xd0/0x418 [ 2027.051503] __pm_runtime_suspend+0x58/0xa0 [ 2027.055693] dwc3_runtime_idle+0x7c/0x90 [dwc3] [ 2027.060224] __rpm_callback+0x88/0x140 [ 2027.063973] rpm_idle+0x78/0x150 [ 2027.067201] __pm_runtime_idle+0x58/0xa0 [ 2027.071130] dwc3_remove+0x64/0xc0 [dwc3] [ 2027.075140] platform_drv_remove+0x28/0x48 [ 2027.079239] device_release_driver_internal+0xf4/0x1c0 [ 2027.084377] driver_detach+0x4c/0xd8 [ 2027.087954] bus_remove_driver+0x54/0xa8 [ 2027.091877] driver_unregister+0x2c/0x58 [ 2027.095799] platform_driver_unregister+0x10/0x18 [ 2027.100509] dwc3_driver_exit+0x14/0x1408 [dwc3] [ 2027.105129] __arm64_sys_delete_module+0x178/0x218 [ 2027.109922] el0_svc_common.constprop.0+0x68/0x160 [ 2027.114714] do_el0_svc+0x20/0x80 [ 2027.118031] el0_sync_handler+0x88/0x190 [ 2027.121953] el0_sync+0x140/0x180 [ 2027.125267] ---[ end trace 027f4f8189958f1f ]--- [ 2027.129976] ------------[ cut here ]------------ Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Cc: <stable@vger.kernel.org> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05usb: dwc3: core: add phy cleanup for probe error handlingLi Jun1-0/+11
commit 03c1fd622f72c7624c81b64fdba4a567ae5ee9cb upstream. Add the phy cleanup if dwc3 mode init fail, which is the missing part of de-init for dwc3 core init. Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths") Cc: <stable@vger.kernel.org> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05usb: dwc3: ep0: Fix ZLP for OUT ep0 requestsThinh Nguyen1-2/+9
commit 66706077dc89c66a4777a4c6298273816afb848c upstream. The current ZLP handling for ep0 requests is only for control IN requests. For OUT direction, DWC3 needs to check and setup for MPS alignment. Usually, control OUT requests can indicate its transfer size via the wLength field of the control message. So usb_request->zero is usually not needed for OUT direction. To handle ZLP OUT for control endpoint, make sure the TRB is MPS size. Cc: stable@vger.kernel.org Fixes: c7fcdeb2627c ("usb: dwc3: ep0: simplify EP0 state machine") Fixes: d6e5a549cc4d ("usb: dwc3: simplify ZLP handling") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>