summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2006-04-26[SCSI] - fusion - mptfc bug fix's to prevent deadlock situationsMoore, Eric4-77/+107
mptbase.h bump version number to 3.03.09 remove unneeded flags define workq and remove old fc specific locks mptbase.c initialize new lock and don't initialize two removed locks mptscsih.c when firmware reports target is no longer there, return DID_REQUEUE for fc hosts so that i/o doesn't get killed until the transport has an opportunity to manage the loss via its dev loss timer when the "eh_abort" routine is called, check to see if the driver has the command or not before looking to see if a reset is pending. James Smart and I talked about this and believe that the API for this routine is: if driver doesn't have command, return SUCCESS. This change helps prevent a target from being taken offline. SUCCESS is returned because it's likely that the command completed after error recovery timed it out but before it could be aborted. provide a routine to queue work to newly created workq, and use it. remove "ioc" from mptscsih_abort() it was only used one time. the other references were via hd->ioc, so I just moved it.... net change in references to ioc via hd->ioc is zero move hd->resetPending test and hd->timeouts increment to after the test for whether the command to be aborted remains known to the driver Make certain that the workq exists before queuing work to it. mptfc.c no longer need to lock rport data structures as I was able to single thread the code! I fixed up the debug code to eliminate compilation messages due to type mismatch in the printk. Got rid of some no longer needed rport flags. Initialize and destroy the workq used for the rescan work. simplify the logic regarding the increment of fc_rescan_work_count. use post increment and test for zero vs. pre increment and test for one; eliminate work_count variable: queue_work can be called with the work_lock held as it doesn't sleep Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-26[SCSI] mptfusion: bug fix's for raid components adding/deletingMoore, Eric3-32/+73
This patch handles case where raid hidden components are not being removed when power turned off to device attached to expander, as well as the case of exposing raid components when power is turned back on to devices attached to an expander. (This is a repost of this patch, with mptsas_is_end_device declared further up in the code.) This patch contains some other miscellaneous bug fix's. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] aic7xxx: ahc_pci_write_config() fixDenis Vlasenko1-6/+6
Fix ahc_pci_write_config's (wrong order of arguments). Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] megaraid: unused variableAndrew Morton1-1/+0
drivers/scsi/megaraid.c: In function `mega_internal_command': drivers/scsi/megaraid.c:4474: warning: unused variable `flags' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] qla2xxx: only free_irq() after request_irq() succeedsZach Brown1-2/+2
If qla2x00_probe_one() fails before calling request_irq() but gets to qla2x00_free_device() then it will mistakenly try to free an irq it didn't request. It's chosing to free based on ha->pdev->irq which is always set. host->irq is set after request_irq() succeeds so let's use that to decide to free or not. This was observed and tested when a silly set of circumstances lead to firmware loading failing on a 2100. Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] Overrun in drivers/scsi/sim710.cEric Sesterhenn1-1/+1
This fixes coverity bug id #480. Since id_array is declared as id_array[MAX_SLOTS], the check for i>MAX_SLOTS is obviously false. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] lpfc 8.1.5 : Change version number to 8.1.5James Smart1-1/+1
Change version number to 8.1.5 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] lpfc 8.1.5 : Misc small fixesJames Smart3-10/+8
Contains the following misc fixes: - Fix build warnings - Race condition in lpfc_workq_post_event() could corrupt phba->work_list. - nlp_sid was not being initialized properly - Fix some RSCN handling during the re-discovery after Link Up event. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] lpfc 8.1.5 : Additional fixes to LOGO, PLOGI, and RSCN processingJames Smart2-33/+37
Additional fixes to LOGO, PLOGI, and RSCN processing Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] lpfc 8.1.5 : Fix cleanup code in the lpfc_pci_probe_one() error code pathJames Smart1-2/+9
Fix cleanup code in the lpfc_pci_probe_one() error code path. This changes the original patch by: - hardsetting the return value from lpfc_pci_probe_one() to -ENODEV (negative value) if we fail attach - removes the checks from lpfc_pci_remove_one() validating the host and phba pointers as it's no longer needed. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] lpfc 8.1.5 : Fixed FC protocol violation in handling of PRLO.James Smart3-14/+38
Fixed FC protocol violation in handling of PRLO. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] lpfc 8.1.5 : Use asynchronous ABTS completion to speed up abort ↵James Smart6-51/+4
completions Use asynchronous ABTS completion to speed up abort completions Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] lpfc 8.1.5 : Fix Discovery processing for NPorts that hit nodev_tmo ↵James Smart3-22/+79
during discovery Fix Discovery processing for NPorts that hit nodev_tmo during discovery Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-20[SCSI] megaraid/megaraid_mm.c: fix a NULL pointer dereferenceAdrian Bunk1-4/+2
This patch fixes a NULL pointer dereference spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19IB/mthca: make a function staticAdrian Bunk1-1/+1
This patch makes the needlessly global mthca_update_rate() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19IB/ipath: Fix whitespaceRoland Dreier2-57/+57
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19IB/ipath: Make more names staticRoland Dreier9-93/+75
Make symbols that are only used in a single source file static. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19IB/mad: Fix RMPP version check during agent registrationHal Rosenstock1-4/+1
Only check that RMPP version is not specified when MAD class does not support RMPP. Just because a class is allowed to use RMPP doesn't mean that rmpp_version needs to be set for the MAD agent to register. Checking this was a recent change which was too pedantic. Signed-off-by: Hal Rosenstock <halr@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19IB/srp: Remove request from list when SCSI abort succeedsRoland Dreier1-7/+11
If a SCSI abort succeeds, then the aborted request should to be removed from the list of pending requests. This fixes list corruption after an abort occurs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19[PATCH] fbdev: Fix return error of fb_writeAntonino A. Daplas1-4/+10
Fix return code of fb_write(): If at least 1 byte was transferred to the device, return number of bytes, otherwise: - return -EFBIG - if file offset is past the maximum allowable offset or size is greater than framebuffer length - return -ENOSPC - if size is greater than framebuffer length - offset Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] savagefb: fix section mismatch warningsRandy Dunlap1-3/+3
Fix modpost section mismatch warnings in savagefb driver: WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x66) WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x6e) WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .text.savagefb_resume after 'savagefb_resume' (at offset 0x70) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] radeonfb section mismatchesRandy Dunlap1-1/+1
Marking radeon_pci_register() as __devinit clears up all section mismatch warnings that are caused by radeon_pci_register() calling various __devinit function. Is there some reason not to do this? WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x628) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6b5) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6bd) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_probe_screens from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7d6) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_check_modes from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7e5) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] fb: Fix section mismatch in savagefbJean Delvare1-1/+1
Fix the following section mismatch: WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.data: from .text.savagefb_probe after 'savagefb_probe' (at offset 0x5e2) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] alim15x3: ULI M-1573 south Bridge supportKAI.HSU1-0/+2
From http://bugzilla.kernel.org/show_bug.cgi?id=6358 The alim15x3.c havn't been update for 3 years. Recently when we use this "ULI M1573" south bridge chip found that can't mount CDROM(VCD) smoothly, must waiting for a long time. After I check the "ULI M1573" south bridge datasheet, I found the reason. The reason is the "ULI M1573" version in the Linux is "0xC7" not "0xC4" anymore So I was modified the source than it was successed. Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] remove the obsolete IDEPCI_FLAG_FORCE_PDCAdrian Bunk2-15/+0
Noted by Sergei Shtylylov <sshtylyov@ru.mvista.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] ide: ATI SB600 IDE supportAnatoli Antonovitch1-0/+1
Add support for the IDE device on ATI SB600 Signed-off-by: Felix Kuehling <fkuehlin@ati.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] pnp: fix two messages in manager.cJan Engelhardt1-2/+2
The wording of two messages in drivers/pnp/manager.c is incorrect. Fix that. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] parport_pc: fix section mismatch warnings (v2)Randy.Dunlap1-10/+10
From: Randy Dunlap <rdunlap@xenotime.net> Fix all modpost section mismatch warnings in parport_pc: WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x230) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x283) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x3e6) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x400) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x463) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x488) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:superios from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x54c) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x56a) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x67) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x9f) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0xa7) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:cards from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x132) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x142) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] Open IPMI BT overflowHeikki Orsila1-1/+1
I was looking into random driver code and found a suspicious looking memcpy() in drivers/char/ipmi/ipmi_bt_sm.c on 2.6.17-rc1: if ((size < 2) || (size > IPMI_MAX_MSG_LENGTH)) return -1; ... memcpy(bt->write_data + 3, data + 1, size - 1); where sizeof bt->write_data is IPMI_MAX_MSG_LENGTH. It looks like the memcpy would overflow by 2 bytes if size == IPMI_MAX_MSG_LENGTH. A patch attached to limit size to (IPMI_MAX_LENGTH - 2). Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] IPMI: fix devinit placementRandy Dunlap1-2/+2
gcc complains about __devinit in the wrong location: drivers/char/ipmi/ipmi_si_intf.c:2205: warning: '__section__' attribute does not apply to types Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] Fix file lookup without refDipankar Sarma1-2/+6
There are places in the kernel where we look up files in fd tables and access the file structure without holding refereces to the file. So, we need special care to avoid the race between looking up files in the fd table and tearing down of the file in another CPU. Otherwise, one might see a NULL f_dentry or such torn down version of the file. This patch fixes those special places where such a race may happen. Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com> Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] m32r: Remove a warning in m32r_sio.cHirokazu Takata1-1/+0
/project/m32r-linux/kernel/linux-2.6.17-rc1-mm2/linux-2.6.17-rc1-mm2/drivers/serial/m32r_sio.c: In function 'm32r_sio_console_write': /project/m32r-linux/kernel/linux-2.6.17-rc1-mm2/linux-2.6.17-rc1-mm2/drivers/serial/m32r_sio.c:1060: warning: unused variable 'i' Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] m41t00: fix bitmasks when writing to chipDavid Barksdale1-4/+4
Fix the bitmasks used when writing to the M41T00 registers. The original code used a mask of 0x7f when writing to each register, this is incorrect and probably the result of a copy-paste error. As a result years from 1980 to 1999 will be read back as 2000 to 2019. Signed-off-by: David Barksdale <amatus@ocgnet.org> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds3-12/+21
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8.c: fix a check-after-use [CPUFREQ] Remove duplicate check in powernow-k8 [CPUFREQ] drivers/cpufreq/cpufreq.c: static functions mustn't be exported [CPUFREQ] If max_freq got reduced (e.g. by _PPC) a write to sysfs scaling_governor let cpufreq core stuck at low max_freq for ever [CPUFREQ] x86_64: Proper null pointer check in powernow_k8_get [CPUFREQ] x86_64: Revert earlier powernow-k8 change [CPUFREQ] Update LART site URL [CPUFREQ] Remove pointless check in conservative governor. [CPUFREQ] trailing whitespace removal de-jour. [CPUFREQ] extra debugging in cpufreq_add_dev()
2006-04-19Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-8/+0
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3479/1: Corgi SSP: Fix potential concurrent access problem [ARM] 3478/1: SharpSL SCOOP: Fix potenial build failure
2006-04-19[CPUFREQ] drivers/cpufreq/cpufreq.c: static functions mustn't be exportedAdrian Bunk1-1/+0
This patch removes the EXPORT_SYMBOL_GPL of the static function cpufreq_parse_governor(). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dave Jones <davej@redhat.com>
2006-04-19[CPUFREQ] If max_freq got reduced (e.g. by _PPC) a write to sysfs ↵Thomas Renninger1-2/+15
scaling_governor let cpufreq core stuck at low max_freq for ever The previous patch had bugs (locking and refcount). This one could also be related to the latest DELL reports. But they only slip into this if a user prog (e.g. powersave daemon does when AC got (un) plugged due to a scheme change) echos something to /sys/../cpufreq/scaling_governor while the frequencies got limited by BIOS. This one works: Subject: Max freq stucks at low freq if reduced by _PPC and sysfs gov access The problem is reproducable by(if machine is limiting freqs via BIOS): - Unplugging AC -> max freq gets limited - echo ${governor} >/sys/.../cpufreq/scaling_governor (policy->user_data.max gets overridden with policy->max and will never come up again.) This patch exchanged the cpufreq_set_policy call to __cpufreq_set_policy and duplicated it's functionality but did not override user_data.max. The same happens with overridding min/max values. If freqs are limited and you override the min freq value, the max freq global value will also get stuck to the limited freq, even if BIOS allows all freqs again. Last scenario does only happen if BIOS does not reduce the frequency to the lowest value (should never happen, just for correctness...) drivers/cpufreq/cpufreq.c | 17 +++++++++++++++-- 1 files changed, 15 insertions(+), 2 deletions(-) Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2006-04-19Merge ../linusDave Jones675-53868/+61250
2006-04-19[ARM] 3478/1: SharpSL SCOOP: Fix potenial build failureRichard Purdie1-8/+0
Patch from Richard Purdie Move platform_scoop_config from the SharpSL scoop PCMCIA driver to the SCOOP driver. This avoids build failures when PCMCIA is not built or is modular (scoop.c itself cannot be modular). Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-18Merge branch 'drm-patches' of ↵Linus Torvalds7-133/+152
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Fix further issues in drivers/char/drm/via_irq.c drivers/char/drm/drm_memory.c: possible cleanups drm: deline a few large inlines in DRM code drm: remove master setting from add/remove context drm: drm_pci needs dma-mapping.h [PATCH] drm: Fix issue reported by Coverity in drivers/char/drm/via_irq.c
2006-04-18drm: Fix further issues in drivers/char/drm/via_irq.cJayachandran C1-3/+4
Fix de-reference of 'dev_priv' before NULL check. Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-04-18drivers/char/drm/drm_memory.c: possible cleanupsAdrian Bunk4-30/+25
- #if 0 the following unused global function: - drm_ioremap_nocache() - make the following needlessly global functions static: - agp_remap() - drm_lookup_map() Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-04-18[PATCH] cciss: bug fix for crash when running hpacucliMike Miller1-47/+49
Fix a crash when running hpacucli with multiple logical volumes on a cciss controller. We were not properly initializing the disk->queue and causing a fault. Thanks to Hasso Tepper for reporting the problem. Thanks to Steve Cameron for root causing the problem. Most of the patch just moves things around. The fix is a one-liner. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Stephen Cameron <steve.cameron@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-18[PATCH] isd200: limit to BLK_DEV_IDERandy Dunlap1-1/+2
Limit USB_STORAGE_ISD200 to whatever BLK_DEV_IDE and USB_STORAGE are set to (y, m) since isd200 calls ide_fix_driveid() in the BLK_DEV_IDE code. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-15Fix AT91RM9200 build breakageDavid Brownell1-20/+31
The at91_cf driver got out of sync with certain changes in the PCMCIA layer, notably getting rid of some duplication of data ... causing the version merged to kernel.org to fail compiling. This patch gives the at91_cf platform device a new iomem resource, using it so this new pcmcia scheme works. It also cleans up some whitepsace bugs that have accumulated over time (mostly too-long lines). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-15[efficeon-agp] Add missing memory maskH. Peter Anvin1-1/+7
Original patch by Benjamin Herrenschmidt after debugging by Brian Hinz. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Hinz <bphinz@hotmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-15Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2-54/+268
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (170 commits) commit 3d9dd7564d5d7c28eb87b14c13a23806484667f3 Author: Zach Brown <zach.brown@oracle.com> Date: Fri Apr 14 16:04:18 2006 -0700 [PATCH] ip_output: account for fraggap when checking to add trailer_len During other work I noticed that ip_append_data() seemed to be forgetting to include the frag gap in its calculation of a fragment that consumes the rest of the payload. Herbert confirmed that this was a bug that snuck in during a previous rework. Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 08d099974a09faf4cb11ffc46da87073fa132fc0 Author: Linus Walleij <triad@df.lth.se> Date: Fri Apr 14 16:03:33 2006 -0700 [IRDA]: smsc-ircc2, smcinit support for ALi ISA bridges ...
2006-04-15Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds38-13226/+990
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (679 commits) commit 7676f83aeb774e7a3abe6af06ec92b29488b5b79 Author: James Bottomley <James.Bottomley@steeleye.com> Date: Fri Apr 14 09:47:59 2006 -0500 [SCSI] scsi_transport_sas: don't scan a non-existent end device Any end device that can't support any of the scanning protocols shouldn't be scanned, so set its id to -1 to prevent scsi_scan_target() being called for it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> commit 3c0c25b97c7d020ef07f6366cf1d668a8e980c7c Author: Moore, Eric <Eric.Moore@lsil.com> Date: Thu Apr 13 16:08:17 2006 -0600 [SCSI] mptfusion - fix panic in mptsas_slave_configure Driver panic when RAID logical volume was present when driver loaded, or when a RAID logical volume was created on the fly. ...
2006-04-15Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds8-29/+41
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (78 commits) commit e97b81ddbb8b8c72b85330ac4a454a4513dcba8a Author: Mark M. Hoffman <mhoffman@lightlink.com> Date: Thu Mar 23 16:50:25 2006 +0100 [PATCH] i2c-parport: Make type parameter mandatory This patch forces the user to specify what type of adapter is present when loading i2c-parport or i2c-parport-light. If none is specified, the driver init simply fails - instead of assuming adapter type 0. This alleviates the sometimes lengthy boot time delays which can be caused by accidentally building one of these into a kernel along with several i2c slave drivers that have lengthy probe routines (e.g. hwmon drivers). Kconfig and documentation updated accordingly. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> ...
2006-04-15Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds5-33/+218
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (169 commits) commit 78a596b4490e17b9990d87b9d468ef5bb70daa10 Author: Adrian Bunk <bunk@stusta.de> Date: Fri Mar 31 01:38:12 2006 -0800 [PATCH] remove kernel/power/pm.c:pm_unregister() Since the last user is removed in -mm, we can now remove this long deprecated function. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> commit 21440d313358043b0ce5e43b00ff3c9b35a8616c Author: David Brownell <david-b@pacbell.net> Date: Sat Apr 1 10:21:52 2006 -0800 [PATCH] dma doc updates ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-12 07:56:37 +0300