summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-02-19bonding: permit using arp_validate with non-ab modesVeaceslav Falico2-5/+2
Currently it's disabled because it's sometimes hard, in typical configs, to make it work - because of the nature how the loadbalance modes work - as it's hard to deliver valid arp replies to correct slaves by the switch. However we still can use arp_validation in loadbalance with several other configs, per example with arp_validate == 2 for backup with one broadcast domain, without the switch(es) doing any balancing - this way we'd be (a bit more) sure that the slave is up. So, enable it to let users decide which one works/suits them best. Also correct the mode limitation from BOND_OPT_ARP_VALIDATE. CC: Nikolay Aleksandrov <nikolay@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: remove bond->lock from bond_arp_rcvVeaceslav Falico1-3/+0
We're always called with rcu_read_lock() held (bond_arp_rcv() is only called from bond_handle_frame(), which is rx_handler and always called under rcu from __netif_receive_skb_core() ). The slave active/passive and/or bonding params can change in-flight, however we don't really care about that - we only modify the last time packet was received, which is harmless. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: support get_msglevel and set_msglevelhayeswang1-0/+16
Support get_msglevel and set_msglevel. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: set disable_hub_initiated_lpmhayeswang1-0/+1
Set disable_hub_initiated_lpm = 1. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: replace netif_rx with netif_receive_skbhayeswang1-1/+1
Replace netif_rx with netif_receive_skb to avoid disabling irq frequently for increasing the efficiency. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: disable teredo for RTL8152hayeswang1-0/+1
Disable teredo for RTL8152 by default. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: support runtime suspendhayeswang1-23/+158
Support runtime suspend for RTL8152 and RTL8153. Move tx_bottom() from tasklet to delayed_work. That avoids to transmit tx packets after calling autosuspend. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: support WOLhayeswang1-13/+105
Support WOL for RTL8152 and RTL8153. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: move some functions from probe to openhayeswang1-20/+25
Add up method for rtl_ops and asign relative functions. Move clear_bp() and hw_phy_cfg() from init method to up method of rtl_ops. Call rtl_ops.up() for ndo_open() and rtl_ops.down for ndo_stop(). Replace allocating the memory in probe() with in ndo_open(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: combine PHY reset with set_speedhayeswang1-12/+45
PHY reset is necessary after some hw settings. However, it would cause the linking down, and so does the set_speed function. Combine the PHY reset with set_speed function. That could reduce the frequency of linking down and accessing the PHY register. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: clear BMCR_PDOWNhayeswang1-2/+13
Modify the method of enabling the PHY to clear BMCR_PDOWN only. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: reduce the frequency of spin_lockhayeswang1-9/+38
Replace getting one item from a list with getting the whole list one time. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: load the default MAC addresshayeswang1-2/+17
Except for RTL_VER_01, replace loading the MAC address from PLA_IDR with from PLA_BACKUP. The default MAC address may be modified by the other OS, so the PLA_IDR may be not the default MAC address. The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed, so load MAC address from PLA_IDR for RTL_VER_01. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: replace some types from int to boolhayeswang1-10/+10
Modify the following functions. - r8153_u1u2en - r8153_u2p3en - r8153_power_cut_en Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: add three functionshayeswang1-48/+51
Replace some codes with the following three functions. - rtl_drop_queued_tx - rxdy_gated_en - r8152_power_cut_en Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: move some functionshayeswang1-53/+53
Move the following functions which is for the further coding. - rtl_clear_bp - r8153_clear_bp - r8153_teredo_off - r8152b_disable_aldps - r8152b_enable_aldps - r8152b_hw_phy_cfg Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Add more PCI device ids.Hariprasad Shenai1-0/+4
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Don't assume LSO only uses SGL path in t4_eth_xmit()Kumar Sanghvi1-10/+22
Also, modify is_eth_imm() to return header length so it doesn't have to be recomputed in calc_tx_flits(). Based on original work by Mike Werner <werner@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Remove unused registers and add missing onesKumar Sanghvi1-2/+2
Remove unused registers for registers list, and add missing ones Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Query firmware for T5 ULPTX MEMWRITE DSGL capabilitiesKumar Sanghvi4-0/+19
Query firmware to see whether we're allowed to use T5 ULPTX MEMWRITE DSGL capabilities. Also pass that information to Upper Layer Drivers via the new (struct cxgb4_lld_info).ulptx_memwrite_dsgl boolean. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: LE-Workaround is not atomic in firmwareKumar Sanghvi1-1/+5
The LE workaround in firmware is not atomic and fw_ofld_connection_wrs must not interleave. Therefore, when the workaround is enabled, we need to send all ctrlq WRs on a single ctrl queue. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Allow >10G ports to have multiple queuesKumar Sanghvi1-4/+5
Based on original work by Divy Le Ray. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Print adapter VPD Part Number instead of Engineering Change fieldKumar Sanghvi3-3/+8
When we attach to adapter, print VPD Part Number instead of Engineering Change field. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Add support to recognize 40G linksKumar Sanghvi4-10/+54
Also, create a new Common Code interface to translate Firmware Port Technology Type values (enum fw_port_type) to string descriptions. This will allow us to maintain the description translation table in one place rather than in every driver. Based on original work by Scott Bardone and Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19wil6210: Use pci_enable_msi_range() instead of pci_enable_msi_block()Alexander Gordeev1-17/+15
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: wil6210@qca.qualcomm.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19vmxnet3: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-28/+19
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: pv-drivers@vmware.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19vmxnet3: Fix MSI-X/MSI enablement codeAlexander Gordeev1-55/+46
This update cleans up the MSI-X/MSI enablement code, fixes vmxnet3_acquire_msix_vectors() invalid return values and enables a dead code in case VMXNET3_LINUX_MIN_MSIX_VECT MSI-X vectors were allocated. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: pv-drivers@vmware.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19niu: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-8/+3
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19sfc: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-11/+9
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: linux-net-drivers@solarflare.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlge: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-11/+4
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlge: Get rid of an redundant assignmentAlexander Gordeev1-1/+0
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlcnic: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-2/+6
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlcnic: Cleanup qlcnic_enable_msix() return valuesAlexander Gordeev1-5/+5
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19netxen: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-2/+3
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19forcedeth: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-2/+5
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19forcedeth: Cleanup MSI-X to MSI to INTx fallback codeAlexander Gordeev1-6/+6
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19forcedeth: Fix invalid errno reporting in nv_request_irq()Alexander Gordeev1-8/+14
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19vxge: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-6/+9
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19s2io: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-2/+3
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19myri10ge: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-20/+20
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Hyong-Youb Kim <hykim@myri.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19mlx5: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-11/+5
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Eli Cohen <eli@mellanox.com> Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19mlx4: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-16/+5
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Amir Vadai <amirv@mellanox.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19ixgbevf: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-21/+11
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19ixgbe: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-12/+4
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19igbvf: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-3/+3
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19igb: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-4/+5
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19i40e: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-27/+6
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19e1000e: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-4/+7
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19benet: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-18/+13
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19enic: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-2/+4
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sujith Sankar <ssujith@cisco.com> Cc: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Cc: Neel Patel <neepatel@cisco.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-12 10:01:42 +0300