summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2008-12-05rt2x00: Implement HW encryption (rt2500usb)Ivo van Doorn8-9/+156
rt2500usb supports hardware encryption. rt2500usb supports up to 4 shared and pairwise keys. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Remove duplicate codeIvo van Doorn1-18/+19
Simplify rt2x00lib_config_antenna() by moving duplicate code into a seperate static inlined function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Store retry limit valuesIvo van Doorn3-8/+9
Store retry limit values in the rt2x00dev structure. This allows the removal of the FIXME where we assumed the long retry is only used when working with RTS frames. Instead we should check the current retry limit values and decide if the required retry count for this frame is a long or short retry. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Optimize IV/EIV handlingIvo van Doorn4-46/+26
IV and EIV belong to eachother and don't require 2 seperate fields. Instead they can logically be merged into a single array with size 2. With this approach we can simplify the code in rt2x00crypto.c by using a single memcpy() when copying the iv/eiv data. Additionally we can move some code out of if-statements because the if-statement would always be true. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Choose correct ANI calibration periodSujith1-2/+3
ANI can't be turned on/off dynamically yet, but the calculation of the calibration period is wrong anyway. This patch fixes it. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: 5150 enable LO, TXIQ and BB calibrationsWinkler, Tomas1-1/+4
This patch enables LO, TXIQ, and BB calibrations for 5150 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: 5150 parametrize eeprom versionsTomas Winkler1-0/+2
Add support for 5150 eeprom versions Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: 5150 compute ct kill thresholdTomas Winkler2-1/+13
This patch adds computation of ct kill threshold for 5150. Threshold is computed from calibration data in the EEPROM. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: 5150 enable DC calibrationTomas Winkler2-1/+7
This patch enables DC calibration for 5150 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: 5150 add support for 5150Tomas Winkler3-0/+17
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Replace ath9k_opmode with nl80211_iftypeColin McCabe10-74/+81
This patch kills ath9k's ath9k_opmode enum by replacing it with nl80211_iftype. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: disable AP modeJohannes Berg2-2/+0
iwlwifi does not support AP mode in any way. For one, it doesn't even buffer multicast/broadcast frames properly. We didn't allow zd1211rw AP mode to be enabled without this, so iwlwifi shouldn't be allowed to advertise AP mode either. It also doesn't work at all, it doesn't even answer to probe requests, I'm guessing the packet injection code was disabled again. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: fix lm87 checksum endiannessJohannes Berg1-3/+3
This fixes the checksum calculation for lm87 firmwares on big endian platforms, the device treats the data as an array of 32-bit little endian values so the driver needs to do that as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwl3945: remove obsolete irq handlingHelmut Schaa1-29/+0
3945 hardware does not emit the interrupts CSR_INT_BIT_RF_KILL (rfkill toggled) and CSR_INT_BIT_CT_KILL (adapter too hot). Hence this part of code can be removed since iwl3945_irq_tasklet does not handle 4965 hw at all. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: per-device namesChristian Lamparter2-47/+55
This patch replaces the static "p54:" strings in front of most printk's with their corresponding per-device names. It was always a bit of a hassle to check which device was generating all the messages. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: refactoringChristian Lamparter2-81/+79
Thanks to the introduction of "changed" flags, we no longer have to do the bookkeeping of p54's firmware state for everything. Thus we can cut down redundancy code. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: include support for 2.13.24.0 USB LM87 FirmwaresChristian Lamparter2-11/+42
Those firmwares are probably capable of reprogramming the device's eeprom. We better support them officially, before all the accidents happen. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: utilize cryptographic acceleratorChristian Lamparter2-13/+168
This patch allows p54 to utilize its WEP, TKIP and CCMP accelerator. Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: revamp station power save management in access point modeChristian Lamparter2-26/+49
This patch addresses the problem in: http://marc.info/?l=linux-wireless&m=122727674810057&w=2 Thanks to Stefan Steuerwald <salsasepp@googlemail.com> extensive iPod touch tests. We could finally squash some bugs in p54's master mode / access point implementation. Let's hope we got everything right this time and all stations from now on will wake up on TIM and receive their queued frames and go to sleep again without any hiccups. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Add a debugfs file for dumping DMA statusSujith6-74/+102
Debugfs file location: ath9k/<wiphy>/dma Contains values in DMA debug registers. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Add initial layout for an ath9k specific debugfs mechanismSujith3-8/+42
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Remove includes that are not neededSujith1-19/+0
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Add ATH9K_DEBUG configuration optionSujith5-17/+75
Make debugging configurable, and add a module parameter to give the debug mask. Add debug.c to hold all debug specific code. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Use cleaner debug masksSujith13-609/+429
Remove all the useless __func__ prefixes in debug messages, and replace the DPRINTF macro with a function. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rtl8187: fix retry count passed in rtl8187_txherton1-2/+2
I mistakenly changed retry count passed in rtl8187_tx in previous change "rtl8187: feedback transmitted packets using tx close descriptor for 8187B". For 8187 it should represent the number of retries (retry count limit). As explained by Johannes Berg, .count represents the number of tries (not retries), and retries = tries - 1. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05wireless: clean up radiotap a bitJohannes Berg2-24/+3
No need to pad the header so no constant needed for that, no need to carry any version number from netbsd nor CVS IDs from them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Handle channel initialization for AP modeSujith2-24/+91
Hostapd now passes the HT parameters through the config() callback, use these to set the appropriate channel in AP mode. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: enable combined michael mic in key cacheBob Copeland4-14/+22
For mac revisions >= "Griffin," the hardware allows the mic tx and rx authenticator keys to share the same cache line, whereas earlier hardware can only store the rx. Enable the combined mic on hardware that supports it. Changes to ath5k.h Changes-licensed-under: 3-Clause-BSD Changes to attach.c, pcu.c, reg.h Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: clean up ath5k_hw_set_keyBob Copeland1-24/+34
Status: O With the addition of TKIP (and soon CCMP), key->alg is a more useful guide to key type than the key length. This patch cleans up key type assignment in ath5k_hw_set_key by extracting it into its own function. It also replaces the separate memcpy() calls for extracting key material into the hardware format with a loop that works regardless of key size. Finally, the patch removes support for WEP-128 since it is a non-standard key length that mac80211 also doesn't use. Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: preserve higher order bits when setting mac addressBob Copeland1-5/+4
In some cases we would like to set the mac address without changing the operating mode. However, Atheros cards store PCU data in the high 16 bits of the mac address register. Change ath5k_hw_set_lladdr() to not clobber the PCU settings. Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: remove uses of __constant_{endian} helpersHarvey Harrison2-163/+163
The base versions handle constant folding just fine. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: properly initialize calibration command headerTomas Winkler3-33/+40
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05hostap: select required crypto bits in KconfigJohn W. Linville1-0/+7
This is fallout from moving the crypto stuff to the new lib80211 component. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05sgi-xp: Kill directly reference of netdev->privWang Chen1-9/+4
Simply replace netdev->priv with netdev_priv(). [ Kill unnecessary casts, noticed by Ilpo -DaveM ] Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04if_usb: Kill directly reference of netdev->privWang Chen1-2/+2
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04smc91x: remove isa stuff from smc91x driverLuotao Fu2-49/+0
ISA support in smc91x is incomplete. I doubt there're any smc91x isa card. This driver is greatly used on arm pxa platforms. Hence we remove the isa stuff from smc91x driver. Signed-off-by: Luotao Fu <lfu@pengutronix.de> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04netdev: remove pathetic compile-command linesAlexey Dobriyan20-183/+0
-m486, -O6 are partircularly amusing. Remove some other useless lines near as well. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04ne-h8300: convert to net_device_opsStephen Hemminger2-8/+21
Another device using 8390 library that needs converting. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04hydra: convert to net_device_opsStephen Hemminger2-7/+18
Another device using 8390 library that needs converting. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04zorro8390: convert to net_device_opsStephen Hemminger2-7/+17
Another device using 8390 library that needs converting. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04e1000: e1000_adapter->polling_netdev is uselessWang Chen2-27/+1
Commit bea3348eef27e6044b6161fd04c3152215f96411 "[NET]: Make NAPI polling independent of struct net_device objects." made NAPI polling to be independent of net_device. So e1000_adapter->polling_netdev is no longer used. Kill it. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04ixgbe: function comment typoWang Chen1-2/+1
Seems the ixgbe's code was copied from e1000. The comment talks about something not exist. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04jme: Remove 64 and 40 bit dma_maskGuo-Fu Tseng1-8/+0
Although the hardware supports the 64bit DMA address in design, but later found that it actually not working. This patch reduced the rang to 32bit. Found-by: "Ethan" <ethanhsiao@jmicron.com> Signed-off-by: "Guo-Fu Tseng" <cooldavid@cooldavid.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04jme: GHC register control fix for new hardwareakeemting2-20/+35
Due to the hardware design, except the first chip on the market, other chips needs to setup the clock source for MAC processor implicitly through Global Host Control Register(GHC). (Strange design huh?) 10/100M uses the PCI-E as clock source, and 1G uses GPHY. And I reordered the code a little, to make it easier to read. Found-by: "Ethan" <ethanhsiao@jmicron.com> Fixed-by: "akeemting" <akeem@jmicron.com> Signed-off-by: "Guo-Fu Tseng" <cooldavid@cooldavid.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04bond: Kill directly reference of netdev->privWang Chen1-1/+1
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04mptlan: Kill directly reference of netdev->privWang Chen2-6/+6
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04dvb: Kill directly reference of netdev->privWang Chen1-18/+19
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04forcedeth: power down phy when interface is downEd Swierk1-2/+10
Bring the physical link down when the interface is down by placing the PHY in power-down state, unless WOL is enabled. This mirrors the behavior of other drivers including e1000 and tg3. Without the patch, ifconfig down leaves the physical link up, which confuses datacenter users who expect the link lights both on the NIC and the switch to go out when they bring an interface down. Furthermore, even though the phy is powered on, autonegotiation stops working, so a normally gigabit link might suddenly become 100 Mbit half-duplex when the interface goes down, and become gigabit when it comes up again. Ayaz said: I would not include this patch until further testing is performed. NVIDIA MCP chips use 3rd party PHY vendors. By powering down the phy, it could have adverse affects on certain phys. Arthur Jones said: I just ran across this patch. Tested on a Marvell 88E1121R (GigE PHY) and works great. This is a very important feature for me. Signed-off-by: Ed Swierk <eswierk@arastra.com> Tested-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04drivers/net/smc911x.c: smc911x_drv_probe() cleanupAndrew Morton1-7/+7
Save an ugly ifdef. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04drivers/isdn/mISDN: use ARRAY_SIZEJulia Lawall1-1/+1
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ #include <linux/kernel.h> @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-22 00:11:22 +0300