summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-04-09tg3: Add a warning during link settings change if mgmt enabledNithin Sujir1-0/+14
When the user executes certain ethtool commands such as -s, -A, -G, -L, -r a phy reset or autonegotiate is performed which results in management traffic being interrupted. Add a warning in these cases. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09tg3: Remove unnecessary phy reset during ethtool commandsNithin Sujir1-2/+2
The current code unnecessarily resets the phy when we use ethtool to change the ring parameters or flow control settings. Remove the phy reset. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09tg3: Fix NVRAM size detection for the STM45PE20 pinstrap on 5762 devicesMichael Chan1-0/+6
The STM45PE20 pinstrap on 5762 devices supports multiple sizes. So treat it just like the ST45_USPT and the size will be read from 0xf0 via tg3_get_nvram_size(). Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09tg3: Fix flow control settings not propagated to hardwareNithin Sujir1-3/+1
In tg3_setup_copper_phy(), if autonegotiation is disabled, we need to relink only if the speed or duplex does not match the configured setting. If flow control does not match, a relink is not necessary as flow control is not a PHY setting. Later on, we'll call tg3_setup_flow_ctrl() to set up the MAC to the desired flow control settings if we're in full duplex mode. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09mrf24j40: use module_spi_driver to simplify the codeWei Yongjun1-12/+1
module_spi_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09net: cdc_ncm: demote "unexpected notification" to debug levelBjørn Mork1-2/+3
Receiving unhandled notifications is most certainly not an error and should not be logged as one. Knowing that the device sends notifications we don't handle is useful for developers, but there is very little a user can do about this. The message is therefore just annoying noise to most users with devices sending unhandled notifications like e.g. USB_CDC_NOTIFY_RESPONSE_AVAILABLE Cc: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09stmmac: prefetch all dma_erx when use extend_descGiuseppe CAVALLARO1-6/+3
This patch is to prefetch, in the stmmac_rx, the whole dma_erx descriptor in case of using the extended descriptors. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09stmmac: review private structure fieldsGiuseppe CAVALLARO1-34/+34
recently many new supports have been added in the stmmac driver w/o taking care about where each new field had to be placed inside the private structure for guaranteeing the best cache usage. This is what I wanted in the beginning, so this patch reorganizes all the fields in order to keep adjacent fields for cache effect. I have also tried to optimize them by using pahole. V2: do not abuse with ____cacheline_aligned_in_smp and keep fields that potentially could stay in the same cache-line for better usage in SMP systems. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09stmmac: code tidy-upGiuseppe CAVALLARO17-309/+311
This patch tidies up the code. I have run Linden (and verified with checkpatch) many part of the driver trying to reorganize some sections respecting the codying-style rules in the points where it was not done. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09stmmac: improve/review and fix kernel-docGiuseppe CAVALLARO2-50/+142
this patch reviews/improves and adds some fixes in the code doc. Also kernel-doc passes w/o any warnings. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09stmmac: modified pcs mode support for SGMIIByungho An1-4/+8
This patch modifies the pcs mode support for SGMII. Even though SGMII does auto-negotiation with phy, it needs stmmac_init_phy and stmmac_mdio_register function for initializing phy. Signed-off-by: Byungho An <bh74.an@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09net: of_mdio: scan mdiobus for PHYs without reg propertySebastian Hesselbarth1-6/+58
Using DT for mdiobus and ethernet-phy requires to know the PHY address, which is hard to guess if you don't know it. This patch extends of_mdiobus_register to scan mdiobus for PHYs if reg property of the corresponding node is not set. This also allows to have phy nodes in SoC DT files where the reg property can be overwritten in the board file later. To encourage people to finally set the actual phy address, the mdiobus scan is noisier than required. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09net: mvmdio: get and enable optional clockSebastian Hesselbarth1-0/+11
Marvell mdio driver uses internal registers that can be clock gated on some SoCs. This patch just adds optional clock handling, to allow to pass and enable the corresponding clock. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09net: ks8851: Use dev_pm_opsLars-Peter Clausen1-17/+20
Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09net: ks8851: Use module_spi_driverLars-Peter Clausen1-13/+1
By using module_spi_driver we can eliminate a few lines of boilerplate code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08mrf24j40: Enable link-layer acknowledgement and retryAlan Ott1-2/+5
On the MRF24J40, link-layer acknowledgment request and retry must be turned on explicitly for each packet. Turn this on in the hardware based on the FC_ACK_REQ bit being set in the packet. Also, now that failure to receive an ACK will cause the hardware to report failure of transmission, change the log level for this failure to debug level. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08at86rf230: remove unnecessary / dead codeSascha Herrmann1-2/+0
In at86rf230_probe() lp was first set to dev->priv and a few lines later dev->priv was set to lp again, without changing lp in between. The call to ieee802154_unregister_device() before err_irq: was unreachable. Signed-off-by: Sascha Herrmann <sascha@ps.nvbi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08enic: be less verbose about non-critical firmware errorsStefan Assmann1-0/+3
If a feature is not supported by firmware no need to print an error message. This surpresses the following harmless message on boot up and ethtool query. enic: Error 1 devcmd 36 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08IEEE 802.15.4: remove get_bsn from "struct ieee802154_mlme_ops"Werner Almesberger1-21/+0
It served no purpose: we never call it from anywhere in the stack and the only driver that did implement it (fakehard) merely provided a dummy value. There is also considerable doubt whether it would make sense to even attempt beacon processing at this level in the Linux kernel. Signed-off-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller41-187/+288
Conflicts: drivers/nfc/microread/mei.c net/netfilter/nfnetlink_queue_core.c Pull in 'net' to get Eric Biederman's AF_UNIX fix, upon which some cleanups are going to go on-top. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08bnx2x: Fix KR2 rapid link flapYaniv Rosner1-7/+11
Check KR2 recovery time at the beginning of the work-around function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08netdev/phy: Implement ieee802.3 clause 45 in mdio-octeon.cDavid Daney1-7/+87
The Octeon SMI/MDIO interfaces can do clause 45 communications, so implement this in the driver. Also fix some comment formatting to make it consistent and to comply with the netdev style. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08vxlan: Bypass encapsulation if the destination is localSridhar Samudrala1-16/+43
This patch bypasses vxlan encapsulation if the destination vxlan endpoint is a local device. Changes since v1: added missing check for vxlan_find_vni() failure Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net/mlx4_en: Advertize DCB_CAP_DCBX_HOST in getdcbxOr Gerlitz1-1/+1
When our getdcbx entry is called, DCB_CAP_DCBX_HOST should be advertized too. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net/mlx4_en: Enable DCB ETS ops only when supported by the firmwareOr Gerlitz4-2/+18
Enable the DCB ETS ops only when supported by the firmware. For older firmware/cards which don't support ETS, advertize only PFC DCB ops. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net/mlx4_core: Added proper description for two device capabilitiesOr Gerlitz1-1/+2
Added readable description for the DPDP and port sensing device capabilities. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: phy: spi_ks8995: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-4/+4
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: wireless: p54spi: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-3/+3
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: wireless: wl1251: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-2/+2
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: ethernet: enc28j60: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-2/+2
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: ethernet: ks8851: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-4/+4
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: can: mcp251x: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-16/+16
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: ieee802154: mrf24j40: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-3/+3
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08r8169: add a new chip for RTL8106Ehayeswang1-0/+21
Add a new chip for RTL8106E series. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08r8169: adjust the flow of hw_starthayeswang1-17/+17
The suggestion as following: - initial settings or default settings - rtl_hw_start_xxx. rtl_hw_start_xxx may change some default settings. - enable tx/rx. This has to be after the above two steps. - rtl_set_rx_mode. AcceptXXXs have to be enabled after enabling tx/rx. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08r8169: add a new chip for RTL8111Ghayeswang1-0/+45
Add a new chip for RTL8111G series. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08r8169: Update the RTL8111G parametershayeswang1-4/+25
- replace rtl8168g-1.fw with rtl8168g-2.fw which support new method. - fix PHY power down is useless. - disable rx early which causes the rx abnormal. - enable auto fifo. - set 10M IFG to default value. - fix the conflict between jumbo frame and flow control. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08r8169: Modify the method for setting firmwarehayeswang1-13/+32
Remove useless action PHY_READ_EFUSE, PHY_READ_MAC_BYTE, PHY_WRITE_MAC_BYTE, PHY_WRITE_ERI_WORD. And define the new action PHY_MDIO_CHG. PHY_MDIO_CHG is used to modify the mdio operation. By the way, the firmware could support setting mac ocp. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08r8169: Update PHY settings of RTL8111Ghayeswang1-2/+22
Add the new settings and correct the wrong settings. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08r8169: Modify the mothod for PHY settings of RTL8111Ghayeswang1-21/+31
Replace the current settings with rtl_writephy and rtl_readphy. For the hardware, the settings are same with previous ones. This make the setting method like the previous chips. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08r8169: Remove firmware codehayeswang1-26/+0
Some codes are belong to binary codes and should be removed. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds9-40/+65
Pull networking fixes from David Miller: 1) Fix erroneous sock_orphan() leading to crashes and double kfree_skb() in NFC protocol. From Thierry Escande and Samuel Ortiz. 2) Fix use after free in remain-on-channel mac80211 code, from Johannes Berg. 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can leak it from one namespace into another. Fix from Gao Feng and Patrick McHardy. 4) Fix overflow in channel scanning array of mwifiex driver, from Stone Piao. 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang. 6) Synchronization of unicast address lists to the undelying device doesn't work because whether to sync is maintained as a boolean rather than a true count. Fix from Vlad Yasevich. 7) Fix corruption of TSO packets in atl1e by limiting the segmented packet length. From Hannes Frederic Sowa. 8) Revert bogus AF_UNIX credential passing change and fix the coalescing issue properly, from Eric W Biederman. 9) Changes of ipv4 address lifetime settings needs to generate a notification, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) netfilter: don't reset nf_trace in nf_reset() net: ipv4: notify when address lifetime changes ixgbe: fix registration order of driver and DCA nofitication af_unix: If we don't care about credentials coallesce all messages Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL" bonding: remove sysfs before removing devices atl1e: limit gso segment size to prevent generation of wrong ip length fields net: count hw_addr syncs so that unsync works properly. r8169: fix auto speed down issue netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths mwifiex: limit channel number not to overflow memory NFC: microread: Fix build failure due to a new MEI bus API iwlwifi: dvm: fix the passive-no-RX workaround netfilter: nf_conntrack: fix error return code NFC: llcp: Keep the connected socket parent pointer alive mac80211: fix idle handling sequence netfilter: nfnetlink_acct: return -EINVAL if object name is empty netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init() netfilter: reset nf_trace in nf_reset mac80211: fix remain-on-channel cancel crash ...
2013-04-05firmware,IB/qib: revert firmware file moveMike Marciniszyn1-1/+1
Commit e2eed58b4fbf ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-05Merge tag 'spi-fix-v3.9-rc5' of ↵Linus Torvalds5-44/+42
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi fixes from Mark Brown: "A bunch of small driver fixes plus a fix for error handling in the core - nothing too exciting overall." * tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts spi: Unlock a spinlock before calling into the controller driver. spi/s3c64xx: modified error interrupt handling and init spi/bcm63xx: don't disable non enabled clocks in probe error path spi/bcm63xx: Remove unused variable spi: slink-tegra20: move runtime pm calls to transfer_one_message
2013-04-05Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR"Johan Hovold2-31/+20
This reverts commit 0ef1594c017521ea89278e80fe3f80dafb17abde. This patch introduced a few races which cannot be easily fixed with a small follow-up patch. Furthermore, the SoC with the broken hardware register, which this patch intended to add support for, can only be used with device trees, which this driver currently does not support. [ Here is the discussion that led to this "revert" patch: https://lkml.org/lkml/2013/4/3/176 ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-05Merge tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds2-2/+3
Pull fbdev fixes from Tomi Valkeinen: "Fix uvesafb crash bug and typoed flag name in fbmon's new videomode code" * tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux: video:uvesafb: Fix dereference NULL pointer code path fbmon: use VESA_DMT_VSYNC_HIGH to fix typo
2013-04-05ixgbe: fix registration order of driver and DCA nofiticationJakub Kicinski1-2/+9
ixgbe_notify_dca cannot be called before driver registration because it expects driver's klist_devices to be allocated and initialized. While on it make sure debugfs files are removed when registration fails. Cc: stable <stable@vger.kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-05bonding: remove sysfs before removing devicesVeaceslav Falico1-1/+1
We have a race condition if we try to rmmod bonding and simultaneously add a bond master through sysfs. In bonding_exit() we first remove the devices (through rtnl_link_unregister() ) and only after that we remove the sysfs. If we manage to add a device through sysfs after that the devices were removed - we'll end up with that device/sysfs structure and with the module unloaded. Fix this by first removing the sysfs and only after that calling rtnl_link_unregister(). Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-05atl1e: limit gso segment size to prevent generation of wrong ip length fieldsHannes Frederic Sowa2-1/+2
The limit of 0x3c00 is taken from the windows driver. Suggested-by: Huang, Xiong <xiong@qca.qualcomm.com> Cc: Huang, Xiong <xiong@qca.qualcomm.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-05Merge tag 'pm+acpi-3.9-rc6' of ↵Linus Torvalds10-30/+68
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Revert of a recent cpuidle change that caused Nehalem machines to hang on boot from Alex Shi. - USB power management fix addressing a crash in the port device object's release routine from Rafael J Wysocki. - Device PM QoS fix for a potential deadlock related to sysfs interface from Rafael J Wysocki. - Fix for a cpufreq crash when the /cpus Device Tree node is missing from Paolo Pisati. - Fix for a build issue on ia64 related to the Boot Graphics Resource Table (BGRT) from Tony Luck. - Two fixes for ACPI handles being set incorrectly for device objects that don't correspond to any ACPI namespace nodes in the I2C and SPI subsystems from Rafael J Wysocki. - Fix for compiler warnings related to CONFIG_PM_DEVFREQ being unset from Rajagopal Venkat. - Fix for a symbol definition typo in cpufreq_governor.h from Borislav Petkov. * tag 'pm+acpi-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / BGRT: Don't let users configure BGRT on non X86 systems cpuidle / ACPI: recover percpu ACPI processor cstate ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices() cpufreq: Correct header guards typo ACPI / SPI: Use parent's ACPI_HANDLE() in acpi_register_spi_devices() cpufreq: check OF node /cpus presence before dereferencing it PM / devfreq: Fix compiler warnings for CONFIG_PM_DEVFREQ unset PM / QoS: Avoid possible deadlock related to sysfs access USB / PM: Don't try to hide PM QoS flags from usb_port_device_release()
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-09 06:02:19 +0300