summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-07-08skge/sky2: change config references to Marvellstephen hemminger1-4/+4
Change references to SysKonnect in Kconfig to Marvell since SysKonnect was acquired by Marvell back in 2002. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: version 1.29stephen hemminger1-1/+1
Since new hardware chip support was added bump version. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: support for new Optima chipsets (EXPERIMENTAL)stephen hemminger2-8/+89
This is a backport from the vendor driver of support for the newer Optima (Prime and 2) chipsets. It also includes some setup changes for the current Optima chip as well. The code and comments intentionally mirror the vendor sk98lin driver to allow for easier maintenance. Although this adds support for new chip id's, these chip id's are not used by any of the current PCI device id's listed in the driver. The patch is just to get initial infrastructure in place to handle them when they come. I don't have access to any of this hardware to actually test it yet. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: use correct Inter Packet Gap at 10/100mbitstephen hemminger2-6/+26
This is another fix picked out of the vendor driver. The IPG value in the serial mode register is supposed to be programmed differently at lower speeds. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: force receive checksum when using RSS on some hardware (v2)stephen hemminger2-3/+18
Found when reviewing the vendor driver. Apparently some chip versions require receive checksumming to be enabled in order for RSS to work. Also, if fix_features has to change some settings; put in message in log in similar manner to netdev_fix_features. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07sky2: use GFP_KERNEL allocations at device setupEric Dumazet1-6/+7
In process and sleep allowed context, favor GFP_KERNEL allocations over GFP_ATOMIC ones. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07bnx2x: Add dcbnl notificationShmulik Ravid1-3/+9
This patch adds a dcbnl notification to the bnx2x. The notification is sent to user mode clients following a change in the dcb negotiated parameters as resolved by the embedded DCBX stack. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07macvtap: macvtapTX zero-copy supportShirley Ma1-11/+121
Only 128 bytes is copied, the rest of data is DMA mapped directly from userspace. Signed-off-by: Shirley Ma <xma@...ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07gianfar v2: code cleanupsSebastian Poehn2-24/+29
This patch: # improves readability of some gianfar nfc code Signed-off-by: Sebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07skge: update versionstephen hemminger2-2/+2
Update version number, and take "New" off the config information since old sk98lin has been gone for a couple years. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07skge: make support for old Genesis chips optionalstephen hemminger2-32/+56
The GENESIS boards are really old PCI-X boards that are rare. Marvell has dropped support for this hardware and there is no reason for most users to have to have this code. Rather than riddling code with ifdef's make one macro and let the compiler do the dead code elimination. This saves about 15% of the text size. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07add pci-id for DGE-530Tstephen hemminger1-0/+1
See also: https://bugzilla.kernel.org/show_bug.cgi?id=38862 Reported-by: jameshenderson@ruggedcom.com Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07skge: cleanup pci id tablestephen hemminger1-11/+10
The PCI table was using mix of defines for device id and hard coded hex values. This patch change it to all hex values. It also adds comments based on the names provided in the vendor driver table. There is NO CHANGE to the actual resulting table. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07net: fix warning of versioncheckShan Wei2-2/+0
net-next-2.6/drivers/net/bnx2x/bnx2x_sp.c: 19 linux/version.h not needed. net-next-2.6/drivers/net/caif/caif_hsi.c: 9 linux/version.h not needed. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06veth: Kill unused tx_droppedEric Dumazet1-4/+1
Followup to commit f82528bc13a (Exclude duplicated checking for iface-up) : We no longer need percpu tx_dropped field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06veth: Kill unused code label and code block.David S. Miller1-7/+0
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06Merge branch 'master' of ↵David S. Miller140-539/+1255
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-06b44: Use pr_<level>_once and DRV_DESCRIPTIONJoe Perches1-10/+4
Convert a printk with a static to pr_<level>_once Add and use DRV_DESCRIPTION to reduce string duplication. Remove now unused version. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06vmxnet3: fix starving rx ring whenoc_skb kb failsShreyas Bhatewara2-43/+96
If the rx ring is completely empty, then the device may never fire an rx interrupt. Unfortunately, the rx interrupt is what triggers populating the rx ring with fresh buffers, so this will cause networking to lock up. This patch replenishes the skb in recv descriptor as soon as it is peeled off while processing rx completions. If the skb/buffer allocation fails, existing one is recycled and the packet in hand is dropped. This way none of the RX desc is ever left empty, thus avoiding starvation Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06Merge branch 'for-davem' of ↵David S. Miller68-159/+16573
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-07-05bnx2x: Fix warning message during 57712/8727 initializationYaniv Rosner1-5/+1
Clear warning message "MDC/MDIO access timeout" during first driver load by setting MDIO clock. This warning has no significant meaning, since it occurs prior to the first PHY initialization. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Add autogrEEEn supportYaniv Rosner3-12/+111
Add autogrEEEn support on BCM84833 and 54618se, which allows to reduce power consumption. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Fix BCM84833 initializationYaniv Rosner2-13/+40
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Fix false link indication at link partner when DAC is usedYaniv Rosner5-0/+42
When driver is unloaded, disable PMD in addition to TX laser, provided that the management firmware will be able to enable it back. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Reset PHY due to fan failure for 578xxYaniv Rosner1-15/+65
Add hardware PHY reset action for BCM578xx when fan failure occur. The new bnx2x_warpcore_hw_reset warps bnx2x_warpcore_power_module to fit the .hw_reset function template of the phy structure. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Add CL37 BAM for WarpcoreYaniv Rosner2-1/+14
Add CL37 BAM support according to configuration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Change BCM54616S to BCM54618SEYaniv Rosner3-30/+62
Change 1G copper PHY BCM54616S to BCM54618SE since we only have HW with latter one of the two. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: PFC fixesYaniv Rosner3-37/+64
Set the source MAC address for PFC packets and update its status during PMF migration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05greth: greth_set_mac_add would corrupt the MAC address.Kristoffer Glembo1-4/+3
The MAC address was set using the signed char sockaddr->sa_addr field and thus the address could be corrupted through sign extension. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net/wireless: ipw2x00: Use helpers from linux/etherdevice.hTobias Klauser1-2/+2
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: vxge: Use is_multicast_ether_addr helperTobias Klauser1-9/+5
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: ewrk3: Use helpers from linux/etherdevice.hTobias Klauser1-5/+3
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: depca: Use helpers from linux/etherdevice.hTobias Klauser1-3/+3
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: rionet: Use is_multicast_ether_addrTobias Klauser1-1/+1
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: iseries_veth: Use is_unicast_ether_addr helperTobias Klauser1-1/+1
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: igb: Use is_multicast_ether_addr helperTobias Klauser1-1/+2
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: de4x5: Use helpers from linux/etherdevice.hTobias Klauser1-4/+3
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: e1000e: Use is_multicast_ether_addr helperTobias Klauser1-1/+1
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05b44: use dev_kfree_skb() in b44_tx()Eric Dumazet1-1/+1
b44_tx() is run from softirq handler, it can use dev_kfree_skb() instead of dev_kfree_skb_irq() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04natsemi: silence dma-debug warningsFUJITA Tomonori1-1/+2
This silences dma-debug warnings: https://lkml.org/lkml/2011/6/30/341 ------------[ cut here ]------------ WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820 check_unmap+0x1fe/0x56a() natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000006ef0040] [map size=1538 bytes] [unmap size=1522 bytes] Modules linked in: pc8736x_gpio pc87360 hwmon_vid scx200_gpio nsc_gpio scx200_hrt scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6 cfg80211 pcspkr rfkill scx200 ide_gd_mod ide_pci_generic ohci_hcd usbcore sc1200 ide_core Pid: 870, comm: collector Not tainted 3.0.0-rc5-sk-00080-gca56a95 #1 Call Trace: [<c011a556>] warn_slowpath_common+0x4a/0x5f [<c02565cb>] ? check_unmap+0x1fe/0x56a [<c011a5cf>] warn_slowpath_fmt+0x26/0x2a [<c02565cb>] check_unmap+0x1fe/0x56a [<c0256aaa>] debug_dma_unmap_page+0x53/0x5b [<c029d6cd>] pci_unmap_single+0x4d/0x57 [<c029ea0a>] natsemi_poll+0x343/0x5ca [<c0116f41>] ? try_to_wake_up+0xea/0xfc [<c0122416>] ? spin_unlock_irq.clone.28+0x18/0x23 [<c02d4667>] net_rx_action+0x3f/0xe5 [<c011e35e>] __do_softirq+0x5b/0xd1 [<c011e303>] ? local_bh_enable+0xa/0xa <IRQ> [<c011e54b>] ? irq_exit+0x34/0x75 [<c01034b9>] ? do_IRQ+0x66/0x79 [<c034e869>] ? common_interrupt+0x29/0x30 [<c0115ed0>] ? finish_task_switch.clone.118+0x31/0x72 [<c034cb92>] ? schedule+0x3b2/0x3f1 [<c012f4b0>] ? hrtimer_start_range_ns+0x10/0x12 [<c012f4ce>] ? hrtimer_start_expires+0x1c/0x24 [<c034d5aa>] ? schedule_hrtimeout_range_clock+0x8e/0xb4 [<c012ed27>] ? update_rmtp+0x68/0x68 [<c034d5da>] ? schedule_hrtimeout_range+0xa/0xc [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c017b051>] ? do_select+0x488/0x4cd [<c0115ee2>] ? finish_task_switch.clone.118+0x43/0x72 [<c01157ad>] ? need_resched+0x14/0x1e [<c017a99e>] ? poll_freewait+0x74/0x74 [<c01157ad>] ? need_resched+0x14/0x1e [<c034cbc1>] ? schedule+0x3e1/0x3f1 [<c011e55e>] ? irq_exit+0x47/0x75 [<c01157ad>] ? need_resched+0x14/0x1e [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a [<c034dd1e>] ? need_resched+0x17/0x19 [<c024bc12>] ? put_dec_full+0x7b/0xaa [<c0240060>] ? blkdev_ioctl+0x434/0x618 [<c024bc70>] ? put_dec+0x2f/0x6d [<c024c6a5>] ? number.clone.1+0x10b/0x1d0 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a [<c034dd1e>] ? need_resched+0x17/0x19 [<c024d046>] ? vsnprintf+0x225/0x264 [<c024cea0>] ? vsnprintf+0x7f/0x264 [<c018346f>] ? seq_printf+0x22/0x40 [<c01a2fcc>] ? do_task_stat+0x582/0x5a3 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c017b1b5>] ? core_sys_select+0x11f/0x1a3 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c01a34a1>] ? proc_tgid_stat+0xd/0xf [<c012357c>] ? recalc_sigpending+0x32/0x35 [<c0123b9c>] ? __set_task_blocked+0x64/0x6a [<c011dfb0>] ? timespec_add_safe+0x24/0x48 [<c0123449>] ? spin_unlock_irq.clone.16+0x18/0x23 [<c017b3a1>] ? sys_pselect6+0xe5/0x13e [<c034dd65>] ? syscall_call+0x7/0xb [<c0340000>] ? rpc_clntdir_depopulate+0x26/0x30 ---[ end trace 180dcac41a50938b ]--- Reported-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: sh_eth: remove __flush_purge_regionYoshihiro Shimoda1-4/+4
It is a function of SuperH architecture. There is no good to use the function on a driver generally. So, the driver uses dma_map_single() instead of __flush_purge_region. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: 8139too: Initial necessary vlan_features to support vlanShan Wei1-0/+1
Offload setting of vlan device requires vlan_features to be initialized. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02Fix call trace when interrupts are disabled while sleeping function kzalloc ↵Shyam Iyer1-4/+3
is called request_threaded irq will call kzalloc that can sleep. Initializing the flags variable outside of spin_lock_irqsave/restore in bnad_mbox_irq_alloc will avoid call traces like below. Jun 27 08:15:24 home-t710 kernel: [11735.634550] Brocade 10G Ethernet driver Jun 27 08:15:24 home-t710 kernel: [11735.634590] bnad_pci_probe : (0xffff880427f3d000, 0xffffffffa020f3e0) PCI Func : (2) Jun 27 08:15:24 home-t710 kernel: [11735.637677] bna 0000:82:00.2: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.638290] bar0 mapped to ffffc90014980000, len 262144 Jun 27 08:15:24 home-t710 kernel: [11735.638732] BUG: sleeping function called from invalid context at mm/slub.c:847 Jun 27 08:15:24 home-t710 kernel: [11735.638736] in_atomic(): 0, irqs_disabled(): 1, pid: 11243, name: insmod Jun 27 08:15:24 home-t710 kernel: [11735.638740] Pid: 11243, comm: insmod Not tainted 3.0.0-rc4+ #6 Jun 27 08:15:24 home-t710 kernel: [11735.638743] Call Trace: Jun 27 08:15:24 home-t710 kernel: [11735.638755] [<ffffffff81046427>] __might_sleep+0xeb/0xf0 Jun 27 08:15:24 home-t710 kernel: [11735.638766] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638773] [<ffffffff8111201c>] kmem_cache_alloc_trace+0x43/0xd8 Jun 27 08:15:24 home-t710 kernel: [11735.638782] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638787] [<ffffffff810ab791>] request_threaded_irq+0xa1/0x113 Jun 27 08:15:24 home-t710 kernel: [11735.638798] [<ffffffffa020f0c0>] bnad_pci_probe+0x612/0x8e5 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638807] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638816] [<ffffffff81482ef4>] ? _raw_spin_unlock_irqrestore+0x17/0x19 Jun 27 08:15:24 home-t710 kernel: [11735.638822] [<ffffffff8124d17a>] local_pci_probe+0x44/0x75 Jun 27 08:15:24 home-t710 kernel: [11735.638826] [<ffffffff8124dc06>] pci_device_probe+0xd0/0xff Jun 27 08:15:24 home-t710 kernel: [11735.638832] [<ffffffff812ef8ab>] driver_probe_device+0x131/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638836] [<ffffffff812ef9e7>] __driver_attach+0x5a/0x7e Jun 27 08:15:24 home-t710 kernel: [11735.638840] [<ffffffff812ef98d>] ? driver_probe_device+0x213/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638844] [<ffffffff812ee933>] bus_for_each_dev+0x53/0x89 Jun 27 08:15:24 home-t710 kernel: [11735.638848] [<ffffffff812ef48a>] driver_attach+0x1e/0x20 Jun 27 08:15:24 home-t710 kernel: [11735.638852] [<ffffffff812ef0ae>] bus_add_driver+0xd1/0x224 Jun 27 08:15:24 home-t710 kernel: [11735.638858] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638862] [<ffffffff812efe57>] driver_register+0x98/0x105 Jun 27 08:15:24 home-t710 kernel: [11735.638866] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638871] [<ffffffff8124e4c9>] __pci_register_driver+0x56/0xc1 Jun 27 08:15:24 home-t710 kernel: [11735.638875] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638884] [<ffffffffa01b8040>] bnad_module_init+0x40/0x60 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638892] [<ffffffff81002099>] do_one_initcall+0x7f/0x136 Jun 27 08:15:24 home-t710 kernel: [11735.638899] [<ffffffff8108608b>] sys_init_module+0x88/0x1d0 Jun 27 08:15:24 home-t710 kernel: [11735.638906] [<ffffffff81489682>] system_call_fastpath+0x16/0x1b Jun 27 08:15:24 home-t710 kernel: [11735.639642] bnad_pci_probe : (0xffff880427f3e000, 0xffffffffa020f3e0) PCI Func : (3) Jun 27 08:15:24 home-t710 kernel: [11735.639665] bna 0000:82:00.3: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.639735] bar0 mapped to ffffc90014400000, len 262144 Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Acked-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02qlge:Version change to v1.00.00.29Jitendra Kalsaria1-1/+1
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02qlge: Fix printk priority so chip fatal errors are always reported.Jitendra Kalsaria1-13/+9
Precedence of the printk should be at higher level so chip fatal errors are always reported. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02qlge:Fix crash caused by mailbox execution on wedged chip.Jitendra Kalsaria2-4/+15
When we are in a recover process from a chip fatal error, driver should skip over execution of mailbox commands during resetting chip. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-026pack,mkiss: fix lock inconsistencyArnd Bergmann2-4/+4
Lockdep found a locking inconsistency in the mkiss_close function: > kernel: [ INFO: inconsistent lock state ] > kernel: 2.6.39.1 #3 > kernel: --------------------------------- > kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. > kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes: > kernel: (disc_data_lock){+++?.-}, at: [<ffffffffa018552b>] mkiss_close+0x1b/0x90 [mkiss] > kernel: {IN-SOFTIRQ-R} state was registered at: The message hints that disc_data_lock is aquired with softirqs disabled, but does not itself disable softirqs, which can in rare circumstances lead to a deadlock. The same problem is present in the 6pack driver, this patch fixes both by using write_lock_bh instead of write_lock. Reported-by: Bernard F6BVP <f6bvp@free.fr> Tested-by: Bernard F6BVP <f6bvp@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ralf Baechle<ralf@linux-mips.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02Merge branch 'for-next' of ↵David S. Miller2-4/+0
git://git2.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan
2011-07-01Merge branch 'for-davem' of ↵David S. Miller8-32/+36
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-07-01net: de4x5: Omit check for multicast bit in netdev_for_each_mc_addrTobias Klauser1-4/+1
There is no need to check for the address being a multicast address in the netdev_for_each_mc_addr loop, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-13 04:10:24 +0300