summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-11-07rt2800: prepare for rt2800lib additionBartlomiej Zolnierkiewicz2-104/+133
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2x00: add support for different chipset interfacesBartlomiej Zolnierkiewicz1-0/+29
Enhance rt2x00 infrastructure by adding explicit information about used chipset interface to struct rt2x00_chip. The new field will be used by rt2800 drivers for rt2800 library. Also add commonly used rt2x00_intf_is_pci() and rt2x00_intf_is_usb() helpers to make code easier to read (noticed by Ivo van Doorn). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800: fix comments in rt2800.hBartlomiej Zolnierkiewicz1-12/+9
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800: fix duplication in header filesBartlomiej Zolnierkiewicz5-3597/+1821
Updated debugging scripts are located here: http://www.kernel.org/pub/linux/kernel/people/bart/rt2800/scripts/ (they also work fine with older drivers) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800usb: add RXINFO_DESC_SIZE definitionBartlomiej Zolnierkiewicz2-3/+4
Add RXINFO_DESC_SIZE definition and use it instead of abusing RXD_DESC_SIZE one (TXD_DESC_SIZE and RXD_DESC_SIZE are specific to PCI version of the chipset). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800: add rt2800lib.hBartlomiej Zolnierkiewicz5-151/+101
Code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2x00: fix rt2x00pci_register_multi[read,write]() argumentsBartlomiej Zolnierkiewicz2-12/+11
Change type of 'length' argument from u16 to u32 (all arguments match rt2x00usb_register_multi[read,write]() ones now). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2x00: fix rt2x00usb_regbusy_read() argumentsBartlomiej Zolnierkiewicz3-3/+3
Add const to 'field' argument of rt2x00usb_regbusy_read() (all arguments match rt2x00pci_regbusy_read() ones now). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2x00: fix rt2x00usb_register_multiwrite() argumentsBartlomiej Zolnierkiewicz2-4/+5
Add const to 'value' argument of rt2x00usb_register_multiwrite() (all arguments match rt2x00pci_register_multiwrite() ones now). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800pci: convert to use struct rt2800_ops methodsBartlomiej Zolnierkiewicz2-6/+51
Add chipset registers access abstraction layer and prepare for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800usb: convert to use struct rt2800_ops methodsBartlomiej Zolnierkiewicz2-6/+51
Add chipset registers access abstraction layer and prepare for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2x00: add driver private field to struct rt2x00_devBartlomiej Zolnierkiewicz1-0/+5
Enhance rt2x00 infrastructure by adding driver specific field to struct rt2x00_dev. The new field will be used by rt2800 drivers for chipset registers access abstraction layer. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800pci: add rt2800_mcu_request() wrapperBartlomiej Zolnierkiewicz1-9/+16
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800usb: add rt2800_mcu_request() wrapperBartlomiej Zolnierkiewicz1-10/+17
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800pci: add rt2800_rf_[read,write]() wrappersBartlomiej Zolnierkiewicz1-13/+19
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800usb: add rt2800_rf_[read,write]() wrappersBartlomiej Zolnierkiewicz1-13/+19
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800pci: add rt2800_rfcsr_[read,write]() wrappersBartlomiej Zolnierkiewicz1-52/+64
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800usb: add rt2800_rfcsr_[read,write]() wrappersBartlomiej Zolnierkiewicz1-42/+54
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800pci: add rt2800_bbp_[read,write]() wrappersBartlomiej Zolnierkiewicz1-63/+75
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800usb: add rt2800_bbp_[read,write]() wrappersBartlomiej Zolnierkiewicz1-63/+75
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800pci: add rt2800_regbusy_read() wrapperBartlomiej Zolnierkiewicz2-6/+14
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800usb: add rt2800_regbusy_read() wrapperBartlomiej Zolnierkiewicz2-5/+13
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800pci: add rt2800_register_multi[read,write]() wrappersBartlomiej Zolnierkiewicz2-11/+26
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800usb: add rt2800_register_multi[read,write]() wrappersBartlomiej Zolnierkiewicz2-8/+22
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800pci: add rt2800_register_[read,write]() wrappersBartlomiej Zolnierkiewicz2-239/+261
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800usb: add rt2800_register_[read,write]() wrappersBartlomiej Zolnierkiewicz2-192/+213
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05wl1271: use __dev_alloc_skb() on RXLuis R. Rodriguez1-1/+1
RX is handled in a workqueue therefore allocating for GFP_ATOMIC is overkill and not required. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2x00: remove needless ifdefs from rt2x00leds.hBartlomiej Zolnierkiewicz1-4/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2800usb: fix comments in rt2800usb.hBartlomiej Zolnierkiewicz1-8/+8
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2800usb: use rt2x00usb_register_multiwrite() to set key entriesBartlomiej Zolnierkiewicz1-14/+4
Since struct hw_key_entry is 32-bytes large and is smaller than CSR cache size (which is 64-bytes large) we can use the standard rt2x00usb_register_multiwrite() helper to set key entries. This cleanup is a part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2x00: fix rt2x00usb_register_read() commentBartlomiej Zolnierkiewicz1-1/+1
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2800pci: fix comment about IV/EIV fieldsBartlomiej Zolnierkiewicz1-2/+2
The bit tested by hardware is TXD_W3_WIV and its value equals the negated value of ENTRY_TXD_ENCRYPT_IV bit. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2800pci: fix comment about register accessBartlomiej Zolnierkiewicz1-1/+3
Registers used for indirect BBP and RF registers access are respectively BBPCSR and RFCSR, also make it clear that all CSR registers access goes through rt2x00pci_register_[read,write]() methods. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2800pci: fix crypto in TX frameBartlomiej Zolnierkiewicz1-1/+1
Based on rt2800usb patch from Benoit PAPILLAULT (commit 17616310836ad2cc45a64576ef0e1520b0dcc81b). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2800usb: fix rt2800usb_rfcsr_read()Bartlomiej Zolnierkiewicz1-1/+1
The driver should write the read request into RF_CSR_CFG register and not BBP_CSR_CFG one in rt2800usb_rfcsr_read(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2800pci: make Kconfig help entry more helpfulBartlomiej Zolnierkiewicz1-1/+4
Document known issues with the driver to aid distribution makers, users and developers in making informed decisions instead of wasting their time needlessly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05rt2800usb: make Kconfig help entry more helpfulBartlomiej Zolnierkiewicz1-1/+5
Document known issues with the driver to aid distribution makers, users and developers in making informed decisions instead of wasting their time needlessly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mac80211: make ieee80211_find_sta per virtual interfaceJohannes Berg5-5/+8
Since we have a TODO item to make all station management dependent on virtual interfaces, I figured I'd start with pushing such a change to drivers before more drivers start using the ieee80211_find_sta() API with a hw pointer and cause us grief later on. For now continue exporting the old API in form of ieee80211_find_sta_by_hw(), but discourage its use strongly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: pci BAR mapping changesLennert Buytenhek1-3/+22
Map BAR0 as well, as we need to write to it during init on some chips. Also, if BAR0 is a 64bit BAR, the register BAR becomes BAR2, so try mapping BAR2 if mapping BAR1 fails. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: shorten receive/transmit state variable namesLennert Buytenhek1-101/+93
To conserve horizontal space. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: add support for enabling hardware sniffer modeLennert Buytenhek1-3/+63
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: report rate and other information for received framesLennert Buytenhek1-6/+25
When receiving a frame, report the antenna info, long/short preamble status, 20/40 MHz flag, long/short guard interval status, MCS/legacy rate status, and MCS/legacy rate index to the stack. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: clarify WME transmit queue 0/1 swizzlingLennert Buytenhek1-20/+6
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: use cond_resched() when loading firmware blocksLennert Buytenhek1-0/+2
Since each firmware block takes on the order of several hundred usec to upload to the hardware, using msleep in the inner loop would make the firmware loading process take a lot more time than just doing busy-waiting like we do now. But if we keep the busy-waiting, we can at least add a cond_resched() to the inner loop so that we give other tasks a chance to run while the firmware is being loaded. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: clear hardware MAC address if no STA interface configuredLennert Buytenhek1-1/+42
If there is no STA interface configured, clear the hardware MAC address to prevent ACKing frames sent to our MAC address. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: enforce FIF_BCN_PRBRESP_PROMISC when no STA interfaces are activeLennert Buytenhek1-3/+14
When FIF_BCN_PRBRESP_PROMISC is not set, we enable the hardware's BSS filter so that we'll only see packets destined for our BSS. But if no STA interfaces have been configured, we would end up passing the BSSID 00:00:00:00:00:00 into the POST_SCAN command, which actually disables the hardware's BSS filter, as it's not a valid BSSID. Fix this by passing in 01:00:00:00:00:00 instead (the criterion is that the OUI part of the BSSID must be nonzero), and add comments to explain what PRE_SCAN and POST_SCAN do. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: implement FIF_ALLMULTILennert Buytenhek1-11/+28
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: use the mac80211-provided workqueue instead of creating our ownLennert Buytenhek1-22/+6
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: fix multicast address filter programmingLennert Buytenhek1-13/+27
mwl8k's ->prepare_multicast() currently just enables reception of all multicast packets, which is somewhat ineffective. Fix this by either disabling all multicast RX, enabling multicast RX according to the multicast address filter table, or enabling all multicast RX, depending on whether ->prepare_multicast() was given any multicast addresses and whether the hardware multicast address filter table is large enough to fit all requested addresses. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-05mwl8k: minor transmit quiescing reworkLennert Buytenhek1-22/+15
Minor changes to the transmit quiescing logic: - Clarify the locking rules for ->tx_wait: only the holder of fw_mutex can wait for the TX path to become idle, but tx_wait itself is read and cleared by the TX reclaim tasklet under tx_lock. - Inline mwl8k_txq_busy() in its callers. - There's no need to kick the transmitter again in mwl8k_tx_wait_empty(), since it will have been kicked when the packets currently in the TX ring were added to it. - If the TX ring didn't drain in time, run mwl8k_scan_tx_ring() after reading priv->pending_pkts without dropping tx_lock in between. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-18 04:36:01 +0300