summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-07-10wl1251: rename wl12xx.h to wl1251.hKalle Valo19-17/+18
wl12xx.h is now only used by 1251 code, so we can rename it. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl1251: add wl1251 prefix to all 1251 filesKalle Valo25-48/+758
Now that all 1271 files are split, we can add wl1251_ prefix to the files. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl1251: remove wl1271_setup()Kalle Valo1-8/+0
We don't want to have any 1271 code in wl1251. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: rename driver to wl1251Kalle Valo2-7/+14
Rename driver to wl1251.ko in preparation for wl1271 driver. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: rename wl1251.c wl1251_ops.cKalle Valo4-5/+5
In preparation to split wl12xx to wl1251 and wl1271. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: Use chipset specific join commandsJuuso Oikarinen5-6/+10
Add implementation to use chipset specific join commands. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: Assign value to rx msdu lifetime variableVidhya Govindan1-0/+1
The patch "wl12xx: cmd and acx interface rework" failed to assign MSDU lifetime value in wl12xx_acx_rx_msdu_life_time() and breaks the functionality. This patch fixes the regression by assigning the correct value. Signed-off-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: enable ELP modeKalle Valo1-5/+1
ELP mode is working now, let's enable it so that the firmware can sleep and reduce power consumption. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: check if elp wakeup failedKalle Valo4-24/+59
Check the return call from wl12xx_ps_elp_wakeup() and bail out if it fails. This shouldn't happen, but if does there's a fundamental low level issue. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: optimise elp wakeup and sleep callsKalle Valo3-13/+25
The wakeup call was done too deep in code path, it's better to wakeup chip from higher levels. This will also reduce wakeup calls significantly. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: protect wl12xx_op_set_rts_threshold()Kalle Valo1-0/+4
The function doesn't lock the mutex before sending the acx. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: Fix CMD_TEST regression via netlink.Ari Kauppi1-24/+11
CMD_TEST via netlink API has been broken since e29c3f59cfbc38c3b481a2694b08962da19c4664: cmd and acx interface rework. The user of the interface sends the request in a buffer without the wl12xx_command header but expects the response to have the wl12xx_command header (with id and status). This patch reverts the e29c3f5 commit for cmd.c:wl12xx_cmd_test and implements the needed wrapper functionality in netlink.c. Now the API of wl12xx_cmd_test and rest of wl12xx_cmd_* commands in cmd.c are similar. Signed-off-by: Ari Kauppi <Ext-Ari.Kauppi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: Fix incorrect warning message.Ari Kauppi1-1/+1
A warning message in wl12xx_acx_event_mbox_mask has a copy/paste error. Fix it to print the correct acx command. Signed-off-by: Ari Kauppi <Ext-Ari.Kauppi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: Add support for block reading from a fixed register addressJuuso Oikarinen2-7/+14
Add support for block reading (multiple bytes) from a fixed chipset register address. This is required for the wl1271 TX data path. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: Moved wl1251 TX path implementation into chip specific filesJuuso Oikarinen6-51/+59
Moved wl1251 TX path implementation into chip specific files to enable parallel implementation for the wl1271 TX path. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: pass the wake up condition when configuring the wake up eventLuciano Coelho3-4/+7
Changed the function wl12xx_acx_wake_up_conditions() so that it receives an argument with the actual wake up condition, instead of having WAKE_UP_EVENT_DTIM_BITMAP hardcoded. This is needed because we have to use different conditions in 1271. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: add support for fixed address in wl12xx_spi_readLuciano Coelho2-7/+14
In the wl1271 implementation, we need to read memory from the register partition using fixed addresses. This change adds the possibility to request fixed address when calling wl12xx_spi_read() or wl12xx_spi_reg_read(). Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: add support for new WL1271 chip revisionLuciano Coelho2-0/+8
This patch adds the code that recognizes the new WL1271 chip revision (PG 2.0). Full support for this chip is not yet implemented and support for WL1271 PG 1.0 is not guaranteed anymore. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: moved firmware version reading routine to chip-specific functionsLuciano Coelho3-3/+9
With WL1271, the firmware version can only be read right after booting the chip. To keep WL1251 aligned with this procedure, the code that reads the firmware version initially has been moved to a common place where it can be read from both chipsets. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: add wl12xx_spi_reg_read() and wl12xx_spi_reg_write() functionsLuciano Coelho2-0/+20
In some cases we need to read more than 32 bits from the register area. These functions were added to support that, like the existing wl12xx_spi_mem_read() and wl12xx_spi_mem_write() already do for large blocks in the memory area. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: removed chipset interrupt source configuration from fw wakeupJuuso Oikarinen1-2/+0
The chipset source interrupt source configuration during fw wakeup was blocking interrupts on the wl1271. The configuration is effectively unused here as it is used to trigger an interrupt for the chipset wake-up event, which is not handled, or waited for, in the fw wakeup anyway on either wl1251 or wl1271. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: fix rx descriptor useKalle Valo3-5/+21
Rx descriptor was incorrectly allocated from stack, use struct wl12xx instead. Needed for DMA transfers. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: use wl12xx_mem_read32() to read the rx counterKalle Valo1-2/+2
As a side effect the transfer is now DMA safe. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: allocate buffer the spi busy word from struct wl12xxKalle Valo3-4/+6
Needed for DMA transfers. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: allocate buffer spi read/write command buffer kzalloc()Kalle Valo2-15/+20
Needed for DMA safe transfers. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: reserve buffer for partition command in struct wl12xxKalle Valo2-11/+17
This is now DMA safe. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: fix error handling in wl12xx_probe()Kalle Valo1-2/+4
Resources were not freed properly in some cases. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: reserver buffer for read32()/write32() in struct wl12xxKalle Valo2-5/+6
The buffer is needed for DMA safe transfers. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: cmd and acx interface reworkKalle Valo9-591/+896
Rework cmd and acx interfaces, it was just too confusing earlier. Now all commands need to contain all the needed headers, either just cmd headers or both cmd and acx headers. This accomplish to remove the extra copy done for each command. The interfaces are now properly documented as well. Also try to make all commands safe for DMA transfers. I might have missed some, but most of them should be fixed now. And this is not all! As a free bonus you will also get some cosmetic cleanups and code reorganisation. Order today! Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath9k: Make sure we configure a non-zero beacon intervalVasanthakumar Thiagarajan1-7/+8
This patch moves the sanity check on beacon interval which was done only for mesh mode to all operating modes just to be safe. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10libertas: remove ps_supported flag, use fwcapinfoAndrey Yurovsky6-10/+3
Power save support depends on the firmware capabilities rather than the card's hardware interface. Use the FW_CAPINFO_PS bit in the firmware capabilities mask throughout the driver in place of the redundant ps_supported flag and don't make decisions about PS support in the interface drivers (with the exception of a special case in the USB driver). V2: put the USB special case in the right place. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath5k: enable hardware LEDsBob Copeland2-0/+23
Cardbus and some PCI cards use hardware LEDs rather than software GPIOs. Program them with the proper blink patterns when idle, scanning or associated. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13288. Tested-by: Frans Pop <elendil@planet.nl> Tested-by: Mark Hindley <mark@hindley.org.uk> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath5k: cleanup ath5k_hw structBob Copeland3-19/+10
ah_gpios array isn't used, and ah_current_channel can be a pointer instead of an embedded struct. Removing these and some other write-only variables, and moving some things around for better packing and cache utilization saves 116 bytes. text data bss dec hex filename 121762 472 64 122298 1ddba ath5k_before.ko 121646 472 64 122182 1dd46 ath5k.ko Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath9k: downgrade ASSERT() in ath_clone_txbuf()Vasanthakumar Thiagarajan1-0/+6
We can easily run out of tx buf if there is any stuck in transmission, so downgrade it to WARN_ON(). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath9k: Remove unnecessary count for addba attemptVasanthakumar Thiagarajan2-13/+1
mac80211 already has one to keep track of number of failure addba attempts. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath9k: Nuke unneccesary helper function to see if aggr is activeVasanthakumar Thiagarajan1-13/+1
IEEE80211_TX_CTL_AMPDU in tx control flags should be enough to confirm BA is negotiated for that tid. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: pass netdev to change_virtual_intfJohannes Berg2-17/+7
If there was a reason I'm passing the ifidx I cannot remember it any more and don't see one now, so let's just pass the pointer itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10Merge branch 'master' of ↵David S. Miller21-52/+116
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-07-10cxgb3: Fix crash caused by stashing wrong netdev_queueRoland Dreier1-2/+1
Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how cxgb3 looks up the netdev_queue it stashes away in a qset during initialization. For multiport devices, the TX queue index it uses is offset by the first_qset index of each port. This leads to a crash once LLTX is removed, since hard_start_xmit is called with one TX queue lock held, while the TX reclaim timer task grabs a different (wrong) TX queue lock when it frees skbs. Fix this by removing the first_qset offset used to look up the TX queue passed into t3_sge_alloc_qset() from setup_sge_qsets(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-10ixgbe: Fix coexistence of FCoE and Flow Director in 82599Yi Zou2-8/+17
Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR) in 82599 and remove the disabling of FDIR when FCoE is enabled. Currently, FDIR is turned off when FCoE is enabled under the assumption that FCoE is always enabled with DCB being turned on. However, FDIR does not have to be turned off all the time when FCoE is enabled since FCoE can be enabled without DCB being turned on, e.g., use link pause only. This patch makes sure that when DCB is turned on or off, FDIR is turned on or off correspondingly; and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR set up properly so FCoE and FDIR can coexist regardless of DCB being on or off. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09Merge branch 'master' of ↵David S. Miller13-11/+42
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-07-08p54: tx refused but queue activeLarry Finger1-2/+3
In the mainline kernel, p54usb will fail because the TX queue length can become < 0. This problem has been reported as Bugzilla #13725. The failure is expressed by the following message in the logs: WARNING: at net/mac80211/tx.c:1325 ieee80211_tx+0x23c/0x298 [mac80211]() Hardware name: HP Pavilion dv2700 Notebook PC tx refused but queue active This problem has been recently observed in the wireless-testing tree, where a full solution is being tested. That fix is too invasive for 2.6.31-rcX, but the simple change supplied here will prevent the failure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08Atheros Kconfig needs to be dependent on WLAN_80211Jay Sternberg1-0/+1
Atheros top level menu needs a "depends WLAN_80211" to properly indent within menuconfig and xconfig interfaces. This is purely a visual issue but it effects all subsequent drivers. The issue is the top level menu does not include a dependency on WLAN_80211 so within the tree structure, Atheros is at the same level as WLAN_80211 but when WLAN_80211 collapsed, the menu disappears along with all subsequent drives, so it is really a subordinate. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08mac80211_hwsim: avoid NULL accessJohannes Berg1-0/+1
There's a race condition -- started can be set to true before channel is set due to the way mac80211 callbacks currently work (->start should probably pass the channel we would like to have initially). For now simply add a check to hwsim to avoid dereferencing the NULL channel pointer. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08ssb: Add support for 4318EClyde McPherson1-2/+4
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by: Clyde McPherson <ccmcphe@verizon.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08b43: Add support for 4318EClyde McPherson1-0/+1
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by: Clyde McPherson <ccmcphe@verizon.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b deviceHin-Tak Leung1-0/+1
Yevgen Kotikov reported success on the sourceforge zd1211-devs list with the following details: Brand/retail: SONY IFU-WLM2 USB-IDs: Vendor: 0x054C Device: 0x0257 chip ID: zd1211b chip 054c:0257 v4802 high 00-0b-6b AL2230_RF pa0 ----- FCC ID: unknown Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Yevgen Kotikov <yevgen.kotikov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08zd1211rw: 07b8:6001 is a ZD1211BPascal Terjan1-1/+1
On a shuttle machine here we got 07b8:6001 device, handled by zd1211rw, which does not work. Scanning is OK but association does not work, we get "direct probe to AP xxx timed out" It appears that this simple patch makes the device work perfectly. This id was already there in initial import of the driver so I don't know if it has ever been working as ZD1211 (which would mean they changed it and kept the id :( ). Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08cxgb3: Drain Mac Tx fifo when the port goes down.Divy Le Ray1-1/+28
Drain the MAC TX fifos when a port goes down. Back pressure might otherwise occur, leading to both ports of the same adapter to hang. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08cxgb3: fix mac index mappingDivy Le Ray1-0/+2
Override the mac index computation for the gen2 adapter, as each port is expected to use index 0. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-08 04:12:28 +0300