summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-07-07IB/qib: Completion queue callback needs to be single threadedRalph Campbell1-1/+1
Workqueues aren't exactly equivalent to tasklets since the callback function may be called from multiple CPUs before the callback returns. This causes completion notification callbacks to have MT bugs since they weren't expecting this behavior. The fix is to use a single threaded work queue. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-07IB/qib: Update 7322 serdes tablesRalph Campbell1-4/+12
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-07IB/qib: Clear 6120 hardware error registerRalph Campbell1-2/+1
The hardware error register needs to be cleared or another interrupt will be generated, thus causing an infinite loop. This is a regression introduced when removing debug output. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-07IB/qib: Clear eager buffer memory for each new processRalph Campbell1-0/+3
The eager buffers are not being cleared before being mmapped into a new user address space. This is a potential security risk and should be fixed. Note that the eager header queue is already being cleared. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-07IB/qib: Mask hardware error during link resetRalph Campbell2-26/+31
The HCA checks for certain hardware errors which can be falsely triggered when the IB link is reset. The fix is to mask them rather than report them. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-07IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problemDave Olson6-6/+46
Don't set write combining via PAT on the VL15 buffers to avoid a rare problem with unaligned writes from interrupt-flushed store buffers. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-07RDMA/cxgb4: Derive smac_idx from port viidSteve Wise1-4/+5
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-07RDMA/cxgb4: Avoid false GTS CIDX_INC overflowsSteve Wise1-5/+20
The T4 IQ hw design assumes CIDX_INC credits will be returned on a regular basis and always before the CIDX counter crosses over the PIDX counter. For RDMA CQs, however, returning CIDX_INC credits is only needed and desired when and if the CQ is armed for notification. This can lead to a GTS write returning credits that causes the HW to reject the credit update because it causes CIDX to pass PIDX. Once this happens, the CIDX/PIDX counters get out of whack and an application can miss a notification and get stuck blocked awaiting a notification. To avoid this, we allocate the HW IQ 2x times the requested size. This seems to avoid the false overflow failures. If we see more issues with this, then we'll have to add code in the poll path to return credits periodically like when the amount reaches 1/2 the queue depth). I would like to avoid this as it adds a PCI write transaction for applications that never arm the CQ (like most MPIs). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-07RDMA/cxgb4: Don't call abort_connection() for active connect failuresSteve Wise1-1/+2
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-07RDMA/cxgb4: Use the DMA state API instead of the pci equivalentsFUJITA Tomonori5-15/+15
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06net/ne: fix memory leak in ne_drv_probe()Kulikov Vasiliy1-1/+3
net_device allocated with alloc_eip_netdev() must be freed. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-05drm/i915: Explosion following OOM in do_execbuffer.Chris Wilson1-1/+2
Oops, when merging the extra details following an OOM, I missed that driver_private is now NULL and the correct way to convert from the drm_gem_object into the drm_i915_gem_object is to use to_intel_bo(). BUG: unable to handle kernel NULL pointer dereference at 00000069 IP: [<c11a4a02>] i915_gem_do_execbuffer+0x71f/0xbb6 *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/vc/vcsa3/uevent Pid: 10993, comm: X Not tainted 2.6.35-rc2+ #67 / EIP: 0060:[<c11a4a02>] EFLAGS: 00213202 CPU: 0 EIP is at i915_gem_do_execbuffer+0x71f/0xbb6 EAX: f647e8a8 EBX: 00000000 ECX: 00000003 EDX: 00000000 ESI: 00424000 EDI: 00000000 EBP: f6508e48 ESP: f6508dd4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process X (pid: 10993, ti=f6508000 task=f6432880 task.ti=f6508000) Stack: f6508de0 f7130000 00000001 00000000 00000000 f647e8a8 00000000 f64f8480 <0> f7974414 00000000 00000006 00000000 00000000 f6578000 00000008 00000006 <0> f6797880 00400000 00000000 ffffffe4 f7974400 000000d0 000000d0 000001c0 Call Trace: [<c11a4f3a>] ? i915_gem_execbuffer2+0xa1/0xe7 [<c118ab96>] ? drm_ioctl+0x22c/0x2fa [<c11a4e99>] ? i915_gem_execbuffer2+0x0/0xe7 [<c107e88c>] ? do_sync_read+0x8f/0xca [<c1088cbd>] ? vfs_ioctl+0x2c/0x96 [<c118a96a>] ? drm_ioctl+0x0/0x2fa [<c10891f4>] ? do_vfs_ioctl+0x429/0x45a [<c107e5c9>] ? fsnotify_access+0x54/0x5f [<c107ee1c>] ? vfs_read+0x9a/0xae [<c1089258>] ? sys_ioctl+0x33/0x4d [<c1002610>] ? sysenter_do_call+0x12/0x26 Code: d0 89 4d c4 31 c9 89 45 d8 eb 44 8b 45 cc 8b 14 88 8b 42 50 89 45 bc 8b 45 a0 8b 52 38 89 55 d0 31 d2 f6 40 20 01 74 0d 8b 55 bc <f6> 42 69 30 0f 95 c2 0f b6 d2 8b 45 d0 c7 45 d4 00 00 00 00 89 EIP: [<c11a4a02>] i915_gem_do_execbuffer+0x71f/0xbb6 SS:ESP 0068:f6508dd4 CR2: 0000000000000069 ---[ end trace 3f1d514b34d39381 ]--- Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-05gpu/drm/i915: Add a blacklist to omit modeset on LID openThomas Bächler1-0/+23
On some machines (currently only the Toshiba Tecra A11 is known), the GPU locks up when modeset is forced on LID open. This patch adds a new DMI blacklist and omits modesetting for all matches. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15550 Signed-off-by: Thomas Bächler <thomas@archlinux.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-05pcmcia: do not initialize the present flag too late.Dominik Brodowski1-2/+1
The "present" flag was initialized too late -- possibly, a card was already registered at this time, so re-setting the flag to 0 caused pcmcia_dev_present() to fail. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-05Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-9/+3
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6205/1: perf: ensure counter delta is treated as unsigned ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220 ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220 ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB section ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance workaround ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMP ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI [ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXA [ARM] pxa/mioa701: fix camera regression [ARM] pxa/z2: fix flash layout to final version [ARM] pxa/z2: fix missing include in battery driver [ARM] pxa: fix incorrect gpio type in udc_pxa2xx.h
2010-07-05Merge branch 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-1/+3
* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6: of/dma: fix build breakage in ppc4xx adma driver
2010-07-05Merge branch 'for_linus' of ↵Linus Torvalds1-13/+40
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: MAINTAINERS: Add an entry for i7core_edac i7core_edac: Avoid doing multiple probes for the same card i7core_edac: Properly discover the first QPI device
2010-07-03Merge branch 'vhost-net' of ↵David S. Miller3-48/+58
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-07-03virtio_net: fix oom handling on txRusty Russell1-8/+13
virtio net will never try to overflow the TX ring, so the only reason add_buf may fail is out of memory. Thus, we can not stop the device until some request completes - there's no guarantee anything at all is outstanding. Make the error message clearer as well: error here does not indicate queue full. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (...and avoid TX_BUSY) Cc: stable@kernel.org # .34.x (s/virtqueue_/vi->svq->vq_ops->/) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-03virtio_net: do not reschedule rx refill foreverMichael S. Tsirkin1-4/+3
We currently fill all of RX ring, then add_buf returns ENOSPC, which gets mis-detected as an out of memory condition and causes us to reschedule the work, and so on forever. Fix this by oom = err == -ENOMEM; Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org # .34.x Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-03s2io: resolve statistics issuesJon Mason2-41/+64
This patch resolves a number of issues in the statistics gathering of the s2io driver. On Xframe adapters, the received multicast statistics counter includes pause frames which are not indicated to the driver. This can cause issues where the multicast packet count is higher than what has actually been received, possibly higher than the number of packets received. The driver software counters are replaced with the adapter hardware statistics for rx_packets, rx_bytes, and tx_bytes. It also uses the overflow registers to determine if the statistics wrapped the 32bit register (removing the window of having a statistic value less than the previous call). rx_length_errors statistic now includes undersized packets in addition to oversized packets in its counting. Finally, rx_crc_errors are now being counted. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-03net: decreasing real_num_tx_queues needs to flush qdiscJohn Fastabend1-1/+1
Reducing real_num_queues needs to flush the qdisc otherwise skbs with queue_mappings greater then real_num_tx_queues can be sent to the underlying driver. The flow for this is, dev_queue_xmit() dev_pick_tx() skb_tx_hash() => hash using real_num_tx_queues skb_set_queue_mapping() ... qdisc_enqueue_root() => enqueue skb on txq from hash ... dev->real_num_tx_queues -= n ... sch_direct_xmit() dev_hard_start_xmit() ndo_start_xmit(skb,dev) => skb queue set with old hash skbs are enqueued on the qdisc with skb->queue_mapping set 0 < queue_mappings < real_num_tx_queues. When the driver decreases real_num_tx_queues skb's may be dequeued from the qdisc with a queue_mapping greater then real_num_tx_queues. This fixes a case in ixgbe where this was occurring with DCB and FCoE. Because the driver is using queue_mapping to map skbs to tx descriptor rings we can potentially map skbs to rings that no longer exist. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-03qlge: fix a eeh handler to not add a pending timerBreno Leitao1-0/+2
On some ocasions the function qlge_io_resume() tries to add a pending timer, which causes the system to hit the BUG() on add_timer() function. This patch removes the timer during the EEH recovery. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-03qlge: Replacing add_timer() to mod_timer()Breno Leitao1-6/+3
Currently qlge driver calls add_timer() instead of mod_timer(). This patch changes add_timer() to mod_timer(), which seems a better solution. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-03usbnet: Set parent device early for netdev_printk()Ben Hutchings1-2/+3
netdev_printk() follows the net_device's parent device pointer, so we must set that earlier than we previously did. Reported-by: Luís Picciochi Oliveira <pitxyoki@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-03net: Revert "rndis_host: Poll status channel before control channel"Ben Hutchings1-12/+6
This reverts commit c17b274dc2aa538b68c1f02b01a3c4e124b435ba. That change was reported to break rndis_wlan support for the WUSB54GS. Reported-by: Luís Picciochi Oliveira <pitxyoki@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-03of/dma: fix build breakage in ppc4xx adma driverDan Williams1-1/+3
Convert ppc4xx adma driver to use new node pointer location Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-03i7core_edac: Avoid doing multiple probes for the same cardMauro Carvalho Chehab1-5/+12
As Nehalem/Nehalem-EP/Westmere devices uses several devices for the same functionality (memory controller), the default way of proping devices doesn't work. So, instead of a per-device probe, all devices should be probed at once. This means that we should block any new attempt of probe, otherwise, it will try to register the same device several times. Acked-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-03i7core_edac: Properly discover the first QPI deviceMauro Carvalho Chehab1-8/+28
On Nehalem/Nehalem-EP/Westmere, the first QPI device is the last PCI bus. The last bus is generally at 0x3f or 0xff, but there are also other systems using different setups. For example, HP Z800 has 0x7f as the last bus. This patch adds a logic to discover the last bus, dynamically detecting it at runtime. Acked-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-02iwlwifi: remove key information during device restartReinette Chatre1-0/+11
When there is a firmware error or the firmware is reloaded for some other reason we currently clear all station information, including keys associated with them. A problem is that we do not clear some other information regarding keys that are not stored in the station structs. The consequence of this is that when the device is reconfigured after the firmware reload we can, among other things, run out of key indices. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16232 http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2221 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com>
2010-07-02Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Cure nr_iowait_cpu() users init: Fix comment init, sched: Fix race between init and kthreadd
2010-07-02Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-12/+12
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix syndrome calculation on K8
2010-07-02amd64_edac: Fix syndrome calculation on K8Borislav Petkov1-12/+12
When calculating the DCT channel from the syndrome we need to know the syndrome type (x4 vs x8). On F10h, this is read out from extended PCI cfg space register F3x180 while on K8 we only support x4 syndromes and don't have extended PCI config space anyway. Make the code accessing F3x180 F10h only and fall back to x4 syndromes on everything else. Cc: <stable@kernel.org> # .33.x .34.x Reported-by: Jeffrey Merkey <jeffmerkey@gmail.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-07-02drivers: bluetooth: bluecard_cs.c: Fixed include error, changed to linux/io.hCody Rester1-1/+1
Fixed include error, changed to linux/io.h Signed-off-by: Cody Rester <codyrester@gmail.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02Merge branch 'for-linus' of ↵Linus Torvalds12-64/+140
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix page flip finish vs. prepare on plane B drm/i915: change default panel fitting mode to preserve aspect ratio drm/i915: fix uninitialized variable warning in i915_setup_compression() drm/i915: take struct_mutex in i915_dma_cleanup() drm/i915: Fix CRT hotplug regression in 2.6.35-rc1 i915: fix ironlake edp panel setup (v4) drm/i915: don't access FW_BLC_SELF on 965G drm/i915: Account for space on the ring buffer consumed whilst wrapping. drm/i915: gen3 page flipping fixes drm/i915: don't queue flips during a flip pending event drm/i915: Fix incorrect intel_ring_begin size in BSD ringbuffer. drm/i915: Turn on 945 self-refresh only if single CRTC is active drm/i915/gen4: Fix interrupt setup ordering drm/i915: Use RSEN instead of HTPLG for tfp410 monitor detection. drm/i915: Move non-phys cursors into the GTT Revert "drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on)." (Included the "fix page flip finish vs. prepare on plane B" patch from Jesse on top of the pull request from Eric. -- Linus)
2010-07-02drm/i915: fix page flip finish vs. prepare on plane BJesse Barnes1-1/+1
The refreshed patch had a copy & paste bug. Reported-by: Simon Farnsworth <simon.farnsworth@onelan.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-02Merge branch 'upstream-linus' of ↵Linus Torvalds3-8/+37
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1 ahci,ata_generic: let ata_generic handle new MBP w/ MCP89 libahci: Fix bug in storing EM messages
2010-07-02correct console log level when ERST ACPI table is not foundDaniel J Blueman1-1/+1
When booting 2.6.35-rc3 on a x86 system without an ERST ACPI table with the 'quiet' option, we still observe an "ERST: Table is not found!" warning. Quiesce it to the same info log level as the other 'table not found' warnings. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-02drm/i915: fix hibernation since i915 self-reclaim fixesLinus Torvalds1-1/+1
Since commit 4bdadb9785696439c6e2b3efe34aa76df1149c83 ("drm/i915: Selectively enable self-reclaim"), we've been passing GFP_MOVABLE to the i915 page allocator where we weren't before due to some over-eager removal of the page mapping gfp_flags games the code used to play. This caused hibernate on Intel hardware to result in a lot of memory corruptions on resume. See for example http://bugzilla.kernel.org/show_bug.cgi?id=13811 Reported-by: Evengi Golov (in bugzilla) Signed-off-by: Dave Airlie <airlied@redhat.com> Tested-by: M. Vefa Bicakci <bicave@superonline.com> Cc: stable@kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-02drm/i915: change default panel fitting mode to preserve aspect ratioJesse Barnes1-2/+2
We did this a long time ago in the DDX driver, but now this fix belongs in the kernel. Preserving the aspect ratio is a nicer default. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=18033. Tested-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-02drm/i915: fix uninitialized variable warning in i915_setup_compression()Prarit Bhargava1-1/+1
Fixes: drivers/gpu/drm/i915/i915_dma.c: In function ‘i915_setup_compression’: drivers/gpu/drm/i915/i915_dma.c:1311: error: ‘compressed_llb’ may be used uninitialized in this function Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-02drm/i915: take struct_mutex in i915_dma_cleanup()Dan Carpenter1-0/+2
intel_cleanup_ring_buffer() calls drm_gem_object_unreference() (as opposed to drm_gem_object_unreference_unlocked()) so it needs to be called with "struct_mutex" held. If we don't hold the lock, it triggers a BUG_ON(!mutex_is_locked(&dev->struct_mutex)); I also audited the other places that call intel_cleanup_ring_buffer() and they all hold the lock so they're OK. This was introduced in: 8187a2b70e3 "drm/i915: introduce intel_ring_buffer structure (V2)" and it's a regression from v2.6.34. Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=16247 Signed-off-by: Dan Carpenter <error27@gmail.com> Reported-by: Benny Halevy <bhalevy@panasas.com> Tested-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-02drm/i915: Fix CRT hotplug regression in 2.6.35-rc1Andy Lutomirski3-8/+11
Commit 7a772c492fcfffae812ffca78a628e76fa57fe58 has two bugs which made the hotplug problems on my laptop worse instead of better. First, it did not, in fact, disable the CRT plug interrupt -- it disabled all the other hotplug interrupts. It seems rather doubtful that that bit of the patch fixed anything, so let's just remove it. (If you want to add it back, you probably meant ~CRT_HOTPLUG_INT_EN.) Second, on at least my GM45, setting CRT_HOTPLUG_ACTIVATION_PERIOD_64 and CRT_HOTPLUG_VOLTAGE_COMPARE_50 (when they were previously unset) causes a hotplug interrupt about three seconds later. The old code never restored PORT_HOTPLUG_EN so this could only happen once, but they new code restores those registers. So just set those bits when we set up the interrupt in the first place. Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-02i915: fix ironlake edp panel setup (v4)Dave Airlie1-3/+24
The eDP spec claims a 20% overhead for the 8:10 encoding scheme used on the wire. Take this into account when picking the lane/clock speed for the panel. v3: some panels are out of spec, try our best to deal with them, don't refuse modes on eDP panels, and try the largest allowed settings if all else fails on eDP. v4: fix stupid typo, forgot to git add before amending. Fixes several reports in bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28070 Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-02drm/i915: don't access FW_BLC_SELF on 965GJesse Barnes2-4/+6
The register offset for FW_BLC_SELF is a totally different set of bits on Broadwater (it's actually MI_RDRET_STATE), so don't treat it like FW_BLC_SELF on 965G chips. Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=26874. Cc: stable@kernel.org Tested-by: Norman Yarvin <yarvin@yarchive.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-02drm/i915: Account for space on the ring buffer consumed whilst wrapping.Chris Wilson1-0/+1
If we fill the tail of the physical ring buffer with NOOP when wrapping, we need to account for the reduction in available space. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-01ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1Tejun Heo1-7/+19
IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA status register. Make the following changes to work around the problem. * Instead of using hard coded 1 in id->driver_data as class code match, use ATA_GEN_CLASS_MATCH and carry the matched id in host->private_data. * Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA flag in id instead. * Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Cc: stable@kernel.org Reported-by: Anders Østhus <grapz666@gmail.com> Reported-by: Andreas Graf <andreas_graf@csgraf.de> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Reported-by: Damien Cassou <damien.cassou@gmail.com> Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-07-01ahci,ata_generic: let ata_generic handle new MBP w/ MCP89Tejun Heo2-0/+16
For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under linux but the controller doesn't require explicit mode setting and works fine with ata_generic. Make ahci ignore the controller on MBP 7,1 and let ata_generic take it for now. Reported in bko#15923. https://bugzilla.kernel.org/show_bug.cgi?id=15923 NVIDIA is investigating why ahci mode doesn't work. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Cc: stable@kernel.org Reported-by: Anders Østhus <grapz666@gmail.com> Reported-by: Andreas Graf <andreas_graf@csgraf.de> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Reported-by: Damien Cassou <damien.cassou@gmail.com> Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-07-01libahci: Fix bug in storing EM messagesHarry Zhang1-2/+3
In function ahci_store_em_buffer(), if the input (signed char*) buffer contains negative data, the constructed 32-bit long message data may be wrong. Signed-off-by: Harry Zhang <harry.zhang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-07-01Merge branch 'drm-fixes' of ↵Linus Torvalds24-118/+255
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) drm/radeon/kms: remove rv100 bios connector quirk drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm mode DRM / radeon / KMS: Fix hibernation regression related to radeon PM (was: Re: [Regression, post-2.6.34] Hibernation broken on machines with radeon/KMS and r300) drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2) drm/radeon: add quirk to make HP nx6125 laptop resume. drm/radeon/kms: add some missing regs to evergreen gpu init drm/radeon/kms: fix typos in evergreen command checker drm/radeon/kms: avoid oops on mac r4xx cards fb: fix colliding defines for fb flags. drm/radeon/kms: Force HDP_NONSURF to maximum size drm/radeon/kms: disable frac fb dividers for rs6xx drm/radeon/kms: don't read attempt to read bios from VRAM on unposted GPU. drm/radeon/kms: fix typo in evergreen_gpu_init drm/radeon/kms: return ret in cursor_set failure path drm/ttm: non pooled page allocation should have GFP_USER set drm/radeon/r100/r200: fix calculation of compressed cube maps drm/radeon/r200: handle more hw tex coord types drm/radeon/kms: CS checker texture fixes for r1xx/r2xx/r3xx drm/radeon: add fake RN50 table for powerpc drm/fb: Fix video= mode computation ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-04 02:05:06 +0300